summaryrefslogtreecommitdiffstats
path: root/common
Commit message (Collapse)AuthorAgeFilesLines
* console: Fix pre-console flushing via cfb_console being very slowHans de Goede2015-05-191-18/+22
| | | | | | | | | | | | | | | | | | | | | | | | | On my A10 OlinuxIno Lime I noticed a huge (5+ seconds) delay coming from console_init_r. This turns out to be caused by the preconsole buffer flushing to the cfb_console. The Lime only has a 16 bit memory bus and that is already heavy used to scan out the 1920x1080 framebuffer. The problem is that print_pre_console_buffer() was printing the buffer once character at a time and the cfb_console code then ends up doing a cache-flush for touched display lines for each character. This commit fixes this by first building a 0 terminated buffer and then printing it in one puts() call, avoiding unnecessary cache flushes. This changes the time for the flush from 5+ seconds to not noticable. The downside of this approach is that the pre-console buffer needs to fit on the stack, this is not that much to ask since we are talking about plain text here. This commit also adjusts the sunxi CONFIG_PRE_CON_BUF_SZ to actually fit on the stack. Sunxi currently is the only user of the pre-console code so no other boards need to be adjusted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: cmd regulator: command cleanupPrzemyslaw Marczak2015-05-141-117/+122
| | | | | | | | | | | | | | | | | This commit cleanups the regulator command. The first change, is adjusting "regulator dev" command to use "regulator-name" constraint, for setting the operating device. Thanks to this, the regulator_get() function is removed. This also updates do_list() function, with loop over uclass_find_* function calls, to prevent probe of all listed regulators. This also cleanups the printing in command. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* common: cmd pmic: command cleanupPrzemyslaw Marczak2015-05-141-76/+55
| | | | | | | | | | | | | | | This commit cleanups the use of function: failed(). The new function name is: failure(), and it is used for print errno and the errno-related message only. The second change is choosing PMIC device by it's name, instead of seq number. Thanks to this change, for set the current device, call of pmic_get() is enough. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* dm: regulator: add regulator commandPrzemyslaw Marczak2015-05-143-0/+426
| | | | | | | | | | | | | | | | | | | | This command is based on driver model regulator's API. The user interface provides: - list UCLASS regulator devices - show or [set] operating regulator device - print constraints info - print operating status - print/[set] voltage value [uV] (force) - print/[set] current value [uA] - print/[set] operating mode id - enable the regulator output - disable the regulator output The 'force' option can be used for setting the value which exceeds the constraints min/max limits. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pmic: add pmic commandPrzemyslaw Marczak2015-05-143-0/+248
| | | | | | | | | | | | | | | This is new command for the PMIC devices based on driver model PMIC API. Command features are unchanged: - list UCLASS pmic devices - show or [set] operating pmic device (NEW) - dump registers - read byte of register at address - write byte to register at address The only one change for this command is 'dev' subcommand. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: i2c: Implement 'i2c bus' command for driver modelSimon Glass2015-05-141-8/+55
| | | | | | | | This command was missed in the conversion. Add it back for driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Heiko Schocher <hs@denx.de>
* usb: add device connection/disconnection detectionVincent Palatin2015-05-142-1/+27
| | | | | | | | | | | | Provide a function to detect USB device insertion/removal in order to avoid having to do USB enumeration in a tight loop when trying to detect peripheral hotplugging. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: Stop reset procedure when a dev is handed over to a companion hcdHans de Goede2015-05-141-1/+2
| | | | | | | | | | Short circuit the retry loop in legacy_hub_port_reset() by returning an error from usb_control_msg() when a device was handed over to a companion by the ehci code. This avoids trying to reset low / fullspeed devices 5 times needlessly. Also do not print an error when a device has been handed over. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: legacy_hub_port_reset() check and propagate usb_set_port_feature() errorsHans de Goede2015-05-141-2/+4
| | | | | | | Actually check for usb_set_port_feature() errors and propagate these if they happen. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: usb_control_msg() propagate controller error codeHans de Goede2015-05-141-2/+4
| | | | | | | Propagate the error returned by submit_control_msg() rather then always returning -EIO when the hcd code indicates an error. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Use map_sysmem when accessing memory in setexprJoe Hershberger2015-05-141-9/+23
| | | | | | | | | The setexpr command used to segfault when accessing memory in sandbox. The pointer accesses should be mapped. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-05-141-0/+105
|\
| * edid: Add a function to read detailed monitor timingsSimon Glass2015-05-131-0/+105
| | | | | | | | | | | | | | | | | | For digital displays (such as EDP LCDs) we would like to read the EDID information and use that to set display timings. Provide a function to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | spl: Correct address in spl_relocate_stack_gd()Simon Glass2015-05-141-1/+1
|/ | | | | | | | | During the Kconfig conversion one of the changes was missed. CONFIG_SPL_STACK_R should be CONFIG_SPL_STACK_R_ADDR since we want the address. Reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* ppc4xx: Remove sc3 boardStefan Roese2015-05-101-14/+0
| | | | | | | | | | | | | | | | As this board seems to be unmaintained for quite some time, and its not moved to the generic board ingrastructure, lets remove it. This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2 and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the only one using one of this macros. A removal patch will follow soon. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Juergen Beisert <jbeisert@eurodsn.de> Acked-by: Heiko Schocher <hs@denx.de>
* Fix broken verify functionality in crc32 commandJoe Hershberger2015-05-101-1/+1
| | | | | | | | | | | | | | Introduced in change d20a40de9db07de1f1f06a79a4da1cdda5379b75 "Roll crc32 into hash infrastructure" The crc32 command with no -v expects an optional 3rd argument to be an address to store the result in. With the -v switch, the last argument is a crc, not an address. In the case where -v is set, we should set the HASH_FLAG_ENV flag since that will first look for the value to be a digest value, which matches the expected API for the crc32 command. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Fix inconsistency of VERIFY defines in cmd_memJoe Hershberger2015-05-101-3/+3
| | | | | | | | | | Introduced in change d20a40de9db07de1f1f06a79a4da1cdda5379b75 "Roll crc32 into hash infrastructure" Use a consistent define to enable the verify feature in crc32 command. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* cmd_part: fix usage textmaxin.john@enea.com2015-05-101-1/+1
| | | | | | | | | | Fix the usage info from: part part uuid <interface> <dev>:<part> to part uuid <interface> <dev>:<part> Signed-off-by: Maxin B. John <maxin.john@enea.com> Reviewed-By: Sjoerd Simons <sjoerd.simons@collabora.co.uk
* spl: spl_mmc: Partition raw boot mode for eMMCPaul Kocialkowski2015-05-101-0/+5
| | | | | | This adds support for providing a partition number instead of a sector for eMMC. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmeticsPaul Kocialkowski2015-05-101-55/+73
| | | | | | | | | | | | | | This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
* image: android: handle default kernel addressMaxime Ripard2015-05-081-2/+25
| | | | | | | | | | | | | | | | | | The two tools that create android boot images, mkbootimg and the fastboot client, set the kernel address by default to 0x10008000. U-boot always honors this field, and will try to relocate the kernel to whatever value is set in the header, which won't be mapped to the actual RAM on most platforms, resulting in the kernel obviously not booting. All the targets in U-Boot right now will download the android boot image to CONFIG_SYS_LOAD_ADDR, which means that it will already have been downloaded to some location that is suitable for execution. In order to have the kernel booting even with the default boot image kernel address, if that address is used, just execute the kernel where it is. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* usb: Fix maxpacketsize for first descriptor read for low-speed usb devsHans de Goede2015-05-061-6/+11
| | | | | | | This fixes descriptor reading of lowspeed devices through ohci not working. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Marek Vasut <marex@denx.de>
* dm: rtc: Convert 'date' command to support driver modelSimon Glass2015-05-051-14/+41
| | | | | | | Adjust this command so that it supports using driver model for I2C, i.e. CONFIG_DM_I2C. This will permit it to be used in sandbox also. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: rtc: Rename to_tm() to rtc_to_tm() and add error codeSimon Glass2015-05-051-1/+1
| | | | | | | | | | Rename this function so that it is clear that it is provided by the RTC. Also return an error when it cannot function as expected. This is unlikely to occur since it works for dates since 1752 and many RTCs do not support such old dates. Still it is better to be accurate. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* dm: rtc: Rename gregorian day functionSimon Glass2015-05-051-1/+1
| | | | | | | | Change this function name to something more descriptive. Also return a failure code if it cannot calculate a correct value. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* fdt: Correct warning in fdt_setup_simplefb_node()Simon Glass2015-05-051-1/+1
| | | | | | Adjust the printf() string to avoid a warning on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Allow CPUs to be set up after relocationSimon Glass2015-04-301-1/+1
| | | | | | | | This permits init of additional CPU cores after relocation and when driver model is ready. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Add a 'cpu' command to print CPU informationSimon Glass2015-04-293-0/+122
| | | | | | | | Add a simple command which provides access to a list of available CPUs along with descriptions and basic information. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Fix comment nits in board_f.cSimon Glass2015-04-291-5/+4
| | | | | | | Try to make it a little clearer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-281-0/+29
|\
| * fdt: add new fdt_fixup_display function to configure displayTim Harvey2015-04-221-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | Add 'fdt_fixup_display' function to fixup device-tree native-mode property of display-timings node to select timings for a specific display. This is useful if a device-tree has configurations for multiple display timings for undetectable displays. see kernel Documentation/devicetree/bindings/video/display-timing.txt Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-04-281-8/+8
|\ \
| * | cmd_sf: Fix problem with "sf update" and unaligned lengthStefan Roese2015-04-221-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On SoCFPGA, using "sf update" with an non-4byte aligned length leads to a hangup (and reboot via watchdog). This is because of the unaligned access in the cadence QSPI driver which is hard to prevent since the data is written into a 4-byte wide FIFO. This patch fixes this problem by changing the behavior of the last sector write (not sector aligned). The new code is even simpler and copies the source data into the temp buffer and now uses the temp buffer to write the complete sector. So only one SPI sector write is used now instead of 2 in the old version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Acked-by: Gerlando Falauto <gerlando.falauto@keymile.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-04-244-5/+11
|\ \ \
| * | | armv8/ls2085aqds: NAND boot supportScott Wood2015-04-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
| * | | armv8/fsl-lsch3: Update early MMU tableYork Sun2015-04-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During booting, IFC is mapped to low region. After booting up, IFC is remapped to high region for larger space. The environmental variables are also stored at high region. In order to read the variables during booting, a virtual mapping is required. Cache was enabled for entire IFC space before. Actually the first two entries are big enough (4MB) to cover the boot code and environmental variables. Remove extra entries. Move OCRAM entry out of ifdef. Signed-off-by: York Sun <yorksun@freescale.com>
| * | | cmd_mem: Store last address/size/etc as ulongScott Wood2015-04-231-3/+3
| |/ / | | | | | | | | | | | | | | | | | | | | | Otherwise the high 32 bits get truncated on 64-bit U-boot. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2015-04-233-84/+33
|\ \ \
| * | | dm: Init device tree as well as driver model in SPLSimon Glass2015-04-231-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If enabled, make sure that the device tree is available in SPL before setting up driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | Correct malloc_limit value for pre-relocation malloc()Simon Glass2015-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The limit is measured from the start of the malloc() area and is not an absolute address. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | Move initf_malloc() to a common placeSimon Glass2015-04-232-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To allow this function to be used from SPL, move it to the malloc() code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | fdt: Rename setup_fdt() and make it prepare alsoSimon Glass2015-04-231-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is little reason to split these two functions. Bring them together which simplifies the init sequence. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | fdt: sandbox: Move setup code from board_f to fdtdecSimon Glass2015-04-231-65/+2
| |/ / | | | | | | | | | | | | | | | | | | We want to be able to set up the device tree in SPL, so move this code to a common place. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | cmd, nand: add more info to "nand info"Heiko Schocher2015-04-231-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add subpagesize, nand options and bbt options to the "nand info" output. => nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 256 b Erase size 262144 b subpagesize 4096 b options 0x 200 bbt options 0x 8000 Signed-off-by: Heiko Schocher <hs@denx.de>
* | | rtc: Set valid date after resetMarek Vasut2015-04-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some RTC chips tend to set garbage date after reset. This patch sets the date to 2000-01-01 00:00 immediatelly after the RTC chip reset is issued using the "date reset" command. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com>
* | | cmd_led: Extend led command to support blinking and more ledsStefan Roese2015-04-231-10/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the U-Boot "led" command to support automatic blinking by setting a blink frequency in milliseconds. Additionally the number of supported LEDs is increased to 6 (0...5). This will be used by the PCA9551 LED driver. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | cmd_scsi: Enable SoC AHCI device on platforms with PCItang yuantian2015-04-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current driver assumes the AHCI is connected to PCI, this is not true on some SoCs, e.g. LS1021A, which has PCI but the AHCI is in SoC. This patch will enable embedded AHCI devices on platforms with PCI. PCI AHCI devices still can be used by commenting CONFIG_SCSI_AHCI_PLAT option in head file. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | unzip: add gzwrite command to write compressed image to block deviceEric Nelson2015-04-221-0/+47
|/ / | | | | | | | | | | | | | | | | | | | | | | Add gzwrite command to write gzip-compressed images to block devices. Input must be gzip-compressed according to RFC1952, since the crc and file size in the trailer will be confirmed during operation. The decompressed file size must be specified on the command line for images with decompressed sizes >= 4GiB because the trailer only contains the low 32 bits of the original file size. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* | kconfig: remove duplicated CMD_DNS optionAndrey Skvortsov2015-04-211-5/+0
| | | | | | | | | | | | | | | | two CMD_DNS options were added by commit 60296a835cb17 ("commands: add more command entries in Kconfig") Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | mii: add read-modify-write option to mii commandTim James2015-04-201-9/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When accessing PHY registers it is often desirable to only update selected bits, so it is necessary to first read the current value before writing back an modified value with the relevant bits updated. To simplify this and to allow such operations to be incorporated into simple shell scripts propose adding a 'modify' option to the existing mii command, which takes a mask indicating the bits to be updated in addition to a data value containing the new bits, ie, <updated> = (<data> & <mask>) | (<current> & ~<mask>). Signed-off-by: Tim <tim.james@macltd.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Tom Rini <trini@konsulko.com> Cc: Tim <tim.james@macltd.com>
generated by cgit (git 2.34.1) at 2024-11-19 19:08:48 +0000