summaryrefslogtreecommitdiffstats
path: root/common/board_r.c
Commit message (Collapse)AuthorAgeFilesLines
* gpio: add gpio-hog supportHeiko Schocher2019-07-131-0/+6
| | | | | | | | | | | | | add gpio-hog support. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. for more infos see: doc/device-tree-bindings/gpio/gpio.txt Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Michal Simek <michal.simek@xilinx.com> (zcu102) Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
* board_r: move initr_watchdog to be called after initr_serialWeijie Gao2019-07-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The initr_watchdog is currently placed before initr_serial. The initr_watchdog calls printf and printf finally calls ops->putc of a serial driver. However, gd->cur_serial_dev points to a udevice allocated in board_f. The gd->cur_serial_dev->driver->ops->putc points the the code region before relocation. Some serial drivers call WATCHDOG_RESET() in ops->putc. When DM is enabled for watchdog, watchdog_reset() is called. watchdog_reset() calls get_timer to get current timer. On some platforms the timer driver is also a DM driver. initr_watchdog is placed right after initr_dm, which means the timer driver hasn't been initialized. So dm_timer_init() is called. To create a new udevice, calloc is called. However start from ops->putc, u-boot execution flow is redirected into the memory region before relocation (board_f). In board_f, dlmalloc hasn't been initialized. The call to calloc will fail, and this will cause DM to print out an error message, and it will call printf again, causing recursive error outputs. This patch places initr_watchdog after initr_serial to solve this issue. Cc: Stefan Roese <sr@denx.de> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Suniel Mahesh <sunil.m@techveda.org>
* watchdog: Implement generic watchdog_reset() versionStefan Roese2019-04-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Maxim Sloyko <maxims@google.com> Cc: Erik van Luijk <evanluijk@interact.nl> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Simon Glass <sjg@chromium.org> Cc: "Álvaro Fernández Rojas" <noltari@gmail.com> Cc: Philippe Reynes <philippe.reynes@softathome.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
* efi_loader: move efi_save_gd() call to board_r.cHeinrich Schuchardt2019-04-121-0/+7
| | | | | | | | | | | | | | | The first functions of the UEFI sub-system are invoked before reaching the U-Boot shell, e.g. efi_set_bootdev(), efi_dp_from_name(), efi_dp_from_file(). We should be able to print out device paths for debugging purposes here. When printing device paths via printf("%pD\n", dp) this invokes functions defined as EFIAPI. So efi_save_gd() must be called beforehand. So let's move the efi_save_gd() call to function initr_reloc_global_data(() in board_r.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* initcall: Move to inline functionAlexander Graf2019-02-091-4/+1
| | | | | | | | | | | | | | | The board_r init function was complaining that we are looping through an array, calling all our tiny init stubs sequentially via indirect function calls (which can't be speculated, so they are slow). The solution to that is pretty easy though. All we need to do is inline the function that loops through the functions and the compiler will automatically convert almost all indirect calls into direct inlined code. With this patch, the overall code size drops (by 40 bytes on riscv64) and boot time should become measurably faster for every target. Signed-off-by: Alexander Graf <agraf@suse.de>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2018-12-051-18/+0
|\ | | | | | | | | | | | | | | - Various MTD fixes from Boris - Zap various unused / legacy paths. - pxa3xx NAND update from Miquel Signed-off-by: Tom Rini <trini@konsulko.com>
| * board_r: Remove initr_spiJagan Teki2018-11-271-11/+0
| | | | | | | | | | | | Drop unused initr_spi, which just return 0, no usage. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: Remove unused mpc8xx codeJagan Teki2018-11-271-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | - spi_init_f - spi_init_r - spi_read - spi_write these spi calls are exclusively for mpc8xx, but the relevant driver is not available so remove it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini2018-12-031-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch queue for efi - 2018-12-03 This release is fully packed with lots of glorious improvements in UEFI land again! - Make PE images more standards compliant - Improve sandbox support - Improve correctness - Fix RISC-V execution on virt model - Honor board defined top of ram (fixes a few boards) - Imply DM USB access when distro boot is available - Code cleanups
| * | fdt: sandbox: correct use of ${fdtcontroladdr}Heinrich Schuchardt2018-12-021-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | The sandbox uses a virtual address space that is neither the physical nor the virtual address space of the operating system. All address used on the command line live in this address space. So also the environment variable ${fdtcontroladdr} has to be in this address space. Commands like bootefi and booti receive the fdt address as parameter. Without the patch ${fdtcontroladdr} cannot be used as parameter value on the sandbox. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
* / board_r: fix build with DM_SPIChristophe Leroy2018-12-031-1/+1
|/ | | | | | | | | | | CC common/board_r.o common/board_r.c:747:2: error: ‘initr_spi’ undeclared here (not in a function) initr_spi, ^ make[1]: *** [common/board_r.o] Error 1 Fixes: ebe76a2df9f6 ("dm: Remove spi_init() from board_r.c when using driver model") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
* configs: drop CONFIG_SYS_EXTRA_ENV_RELOCSimon Goldschmidt2018-10-061-7/+4
| | | | | | | | | | | | Instead of manually specifying CONFIG_SYS_EXTRA_ENV_RELOC for every board that needs it, it shouldn't hurt to let initr_reloc_global_data() always relocate gd->env_addr unless we know this pointer is outside the initial binary. To achieve this, the relocation is omitted if CONFIG_ENV_ADDR is defined (and ENV_IS_EMBEDDED is not). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* sandbox: led: use new function to configure default statePatrick Delaunay2018-08-101-1/+2
| | | | | | | | | Initialize the led with the default state defined in device tree in board_init and solve issue with test for led default state. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* env: common: accept flags on reset to default envYaniv Levinsky2018-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The function set_default_env() sets the hashtable flags for import_r(). Formally set_default_env() doesn't accept flags from its callers. In practice the caller can (un)set the H_INTERACTIVE flag, but it has to be done using the first character of the function's string argument. Other flags like H_FORCE can't be set by the caller. Change the function to accept flags argument. The benefits are: 1. The caller will have to explicitly set the H_INTERACTIVE flag, instead of un-setting it using a special char in a string. 2. Add the ability to propagate flags from the caller to himport(), especially the H_FORCE flag from do_env_default() in nvedit.c that currently gets ignored for "env default -a -f" commands. 3. Flags and messages will not be coupled together. A caller will be able to set flags without passing a string and vice versa. Please note: The propagation of H_FORCE from do_env_default() does not introduce any functional changes, because currently himport_r() is set to destroy the old environment regardless if H_FORCE flag is set or not. More changes are needed to utilize the propagation of H_FORCE. Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* common: print \n in initr_scsi()Heinrich Schuchardt2018-07-101-0/+1
| | | | | | | | | | | Typically init_scsi() does not output anything. So initr_scsi() should provide a \n or we may see borked output like SCSI: Net: No ethernet found. as observed with sandbox_defconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* board_r: Do not initialize IDE when DM BLK is onBin Meng2018-06-241-2/+2
| | | | | | | | | With driver model philosophy, we should avoid explicitly calling driver initialization routine during boot. This updates the ram init sequence table to exclude the IDE initialization for DM BLK. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPI to KconfigAdam Ford2018-04-271-2/+2
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* input: Drop PS/2 keyboard supportSimon Glass2018-04-061-15/+0
| | | | | | | This is not used by any current board and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: move init_helpers.h prototypes in init.hPatrick Delaunay2018-03-161-1/+0
| | | | | | | | Merge init_helpers.h in the new file init.h with only prototypes for init_cache_f_r used in common/board_f.c Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* fix spelling of 'functions' in 2 places (was 'funtcions')Simon Goldschmidt2018-02-131-1/+1
| | | | Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
* common: board_r: Fix style violationsMario Six2018-01-281-13/+14
| | | | | | | Fix some style violations in the board_r file. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
* board_r: remove superfluous #ifdef CONFIG_PRAMHeinrich Schuchardt2018-01-191-2/+0
| | | | | | | | | | | | initr_mem() is already enclosed by #if defined(CONFIG_PRAM) #endif So there is no need to check CONFIG_PRAM again inside the function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* riscv: Modify generic codes to support RISC-VRick Chen2018-01-121-2/+2
| | | | | | | | | | Support common commands bdinfo and image format, also modify common generic flow for RISC-V. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* log: Plumb logging into the init sequenceSimon Glass2017-12-071-0/+2
| | | | | | | Set up logging both before and after relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Drop the log bufferSimon Glass2017-12-071-23/+2
| | | | | | | | This does not appear to be used by any boards. Before introducing a new log system, remove this old one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Drop CONFIG_HAS_DATAFLASHTuomas Tynkkynen2017-10-161-15/+0
| | | | | | | | Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()Simon Glass2017-08-161-6/+6
| | | | | | Rename this function for consistency with env_get(). Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()Simon Glass2017-08-161-3/+3
| | | | | | | | We are now using an env_ prefix for environment functions. Rename these for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Rename common functions related to setenv()Simon Glass2017-08-161-1/+1
| | | | | | | | | We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Rename setenv() to env_set()Simon Glass2017-08-161-1/+1
| | | | | | | | We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LENAndy Yan2017-07-271-1/+1
| | | | | | | | | | | | | | | | | Some platforms have very limited SRAM to run SPL code, so there may not be the same amount space for a malloc pool before relocation in the SPL stage as the normal U-Boot stage. Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN, so the size of pre-relocation malloc pool can be configured memory space independently. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fixed up commit-message:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* Allow displaying the U-Boot banner on a video displaySimon Glass2017-07-111-0/+1
| | | | | | | | | | | | | | At present the U-Boot banner is only displayed on the serial console. If this is not visible to the user, the banner does not show. Some devices have a video display which can usefully display this information. Add a banner which is printed after relocation only on non-serial devices if CONFIG_DISPLAY_BOARDINFO_LATE is defined. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* avr32: Retire AVR32 for goodAndy Shevchenko2017-07-061-10/+3
| | | | | | | | | | | | | | AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* powerpc, 8xx: remove support for 8xxHeiko Schocher2017-06-121-14/+0
| | | | | | | | | | There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
* bootstage: Record time taken to set up the live device treeSimon Glass2017-06-051-2/+9
| | | | | | | This time is interesting as a comparision with the flat device tree time. Add it to the record. Signed-off-by: Simon Glass <sjg@chromium.org>
* bootstage: Record the time taken to set up driver modelSimon Glass2017-06-051-0/+2
| | | | | | | Driver model is set up ones before relocation and once after. Record the time taken in each case. Signed-off-by: Simon Glass <sjg@chromium.org>
* bootstage: Init as early as possibleSimon Glass2017-06-051-2/+1
| | | | | | | | | | At present we don't allow use of bootstage before driver model is running. This means we cannot time the init of driver model itself. Now that bootstage requires its own board-specific timer, we can move its init to earlier in the sequence, both before and after relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
* api: Add a header for api_init()Simon Glass2017-06-051-0/+1
| | | | | | Put this in its own header instead of using common.h. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Build a live tree after relocationSimon Glass2017-06-011-0/+12
| | | | | | | If enabled, build a live device tree after relocation. This can then be used by driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* Kconfig: Add a CONFIG_IDE optionSimon Glass2017-05-221-6/+4
| | | | | | | | | | | At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2017-05-161-2/+2
|\ | | | | | | | | | | | | - Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to match other TI platforms in the same situation. Signed-off-by: Tom Rini <trini@konsulko.com>
| * mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMCMasahiro Yamada2017-05-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Drop CONFIG_I2CFASTSimon Glass2017-05-151-17/+0
|/ | | | | | This option is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* board_f: Make init_helpers genericSimon Glass2017-04-051-3/+1
| | | | | | | | This header file is used by two archs. It could be used by all of them since it allows the cache to be on during relocation. Move it into a generic file. Signed-off-by: Simon Glass <sjg@chromium.org>
* SPARC: RemoveTom Rini2017-04-051-30/+1
| | | | | | | The SPARC architecture is currently unmaintained, remove. Cc: Francois Retief <fgretief@spaceteq.co.za> Signed-off-by: Tom Rini <trini@konsulko.com>
* mtd: nand: remove nand size print from nand_init functionHou Zhiqiang2017-03-281-0/+1
| | | | | | | | | Add nand_size() function to move the nand size print into initr_nand(). Remove nand size print from nand_init() to allow other function to call nand_init() without printing nand size. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* flash: complete CONFIG_SYS_NO_FLASH move with renamingMasahiro Yamada2017-02-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* x86: board_r: Set the global data pointer after relocationSimon Glass2017-02-061-0/+10
| | | | | | | | | | | | | | | | | | Since 'gd' is just a normal variable on 64-bit x86, it is relocated by the time we get to board_init_r(). The old 'gd' variable is passed in as parameter to board_init_r(), presumably for this situation. Assign it on 64-bit x86 so that gd points to the correct data. Options to improve this: - Make gd a fixed register and remove the board_init_r() parameter - Make all archs use this board_init_r() parameter The second has a TODO in the code. The first has a TODO in a future commit ('x86: Support global_data on x86_64') Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* board_f/r: Use static const for the init sequencesSimon Glass2017-02-061-1/+1
| | | | | | | | | | These tables should be declared static const. Unfortunately the table in board_r is updated on machines with manual relocation. Update them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-11-17 23:17:55 +0000