summaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* board: sifive: add HiFive Unmatched board supportGreen Wan2021-05-316-0/+179
| | | | | | | | Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
* ARM: stm32: Add additional ID register check for KSZ8851 presenceMarek Vasut2021-05-281-1/+10
| | | | | | | | | | | | | | | | | Currently the code sets eth1addr only if /ethernet1 alias exists in DT, the node pointed to by the alias has "micrel,ks8851-mll" compatible string, and the KSZ8851 CCR register read indicates programmed EEPROM is not connected. This is not sufficient to detect cases where the DT still contains the KSZ8851 nodes, but the chip itself is not present. Extend the detection to handle these cases. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* ARM: stm32: Update dhelectronics/dh_stm32mp1/MAINTAINERS fileChristoph Niedermaier2021-05-281-0/+1
| | | | | | | Adding new DH electronics mailing list. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck2021-05-255-172/+0
| | | | | | | | | | | | | | Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* ARM: fix LTO for rockchip and samsungMarek Behún2021-05-241-1/+1
| | | | | | | | | | | | | | | When building with LTO, the compiler complains about type mismatch of function usb_gadget_handle_interrupts(). This function is defined without parameters in files arch/arm/mach-rockchip/board.c board/samsung/common/exynos5-dt.c but it should have one parameter, int index. Fix this. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún2021-05-247-7/+7
| | | | | | | | | | | | | | | | | This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* riscv: ae350: Switch to use binman to generate u-boot.itbBin Meng2021-05-191-0/+1
| | | | | | | | | Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs, so that binman is now used to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
* riscv: sifive: unleashed: Switch to use binman to generate u-boot.itbBin Meng2021-05-191-0/+1
| | | | | | | | | At present SiFive Unleashed board uses the Makefile to create the FIT, using USE_SPL_FIT_GENERATOR, which is deprecated as per the Makefile warning. Update to use binman instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* efi_loader: capsule: Remove the check for capsule_authentication_enabled ↵Sughosh Ganu2021-05-181-6/+0
| | | | | | | | | | | | | | environment variable The current capsule authentication code checks if the environment variable capsule_authentication_enabled is set, for authenticating the capsule. This is in addition to the check for the config symbol CONFIG_EFI_CAPSULE_AUTHENTICATE. Remove the check for the environment variable. The capsule will now be authenticated if the config symbol is set. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviwed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* arm: octeontx2: Add Octeon TX2 CN913x DB supportKonstantin Porotchkin2021-05-162-0/+25
| | | | | | | | | | This patch adds the base support for the Marvell Octeon TX2 CN913x DB. Only one defconfig is added with this patch. Other board variants are available (NAND, MMC booting) and images for these boards can be generated by following the documentation added in the included README. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini2021-05-143-16/+81
|\
| * ARM: renesas: Scrub duplicate memory nodes from DT on Gen3Marek Vasut2021-05-121-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Scrub duplicate /memory@* node entries here. Some R-Car DTs might contain multiple /memory@* nodes, however fdt_fixup_memory_banks() either generates single /memory node or updates the first /memory node. Any remaining memory nodes are thus potential duplicates. However, it is not possible to delete all the memory nodes right away, since some of those might not be DRAM memory nodes, but some sort of other memory. Thus, delete only the memory nodes which are in the R-Car3 DBSC ranges. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
| * ARM: rmobile: Add missing rcar-common/common.c to Beacon RZG2M kitMarek Vasut2021-05-122-16/+1
| | | | | | | | | | | | | | | | | | The rcar-common/common.c contains various common board functions shared by all R-Car and RZG boards. This board is not compiling the file in, so add it. This way, part of the board code can be de-duplicated too. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Adam Ford <aford173@gmail.com>
* | riscv: k210: Rename airam to aisramSean Anderson2021-05-141-1/+1
| | | | | | | | | | | | | | | | This is more consistent with the naming of other ram banks, and matches what Linux is doing. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Sean Anderson <seanga2@gmail.com>
* | riscv: Enable AI ram on K210Sean Anderson2021-05-141-1/+11
| | | | | | | | | | | | | | | | We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson <seanga2@gmail.com>
* | am335x: add support for cape detect functionalityKory Maincent2021-05-131-0/+1
| | | | | | | | | | | | | | Update the Kconfig and the board file to make the am335x board compatible with cape detection. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
* | arm: am335x: add support for i2c2 busKory Maincent2021-05-133-0/+18
| | | | | | | | | | | | | | | | | | The am335x from BeagleBone use i2c EEPROM to detect capes. The memory is wired to i2c bus 2 therefore it need to be enabled. Add i2c2 clock, pinmux description and pinmux enable function. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
* | arm: sunxi: add support for DIP detection to CHIP boardKory Maincent2021-05-132-0/+101
| | | | | | | | | | | | | | | | | | | | Add the extension_board_scan specific function to scan the information of the EEPROM on one-wire and fill the extension struct. Add the Kconfig symbol to enable the needs to detect DIPs. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Andre Przywara <andre.przywara@arm.com>
* | am57xx: add support for cape detect functionalityKory Maincent2021-05-131-0/+1
| | | | | | | | | | | | | | This commit enables using the extension board detection mechanism on AM57xx based platforms. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
* | ti/common: add support for extension_scan_board functionKory Maincent2021-05-134-0/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BeagleBone platforms all use a common mechanism to discover and identify extension boards (called "capes"): each extension board has an I2C-connected EEPROM describing itself. This patch implements a generic extension_scan_board() feature that can be used by all BeagleBone platforms to read those I2C EEPROMs and fill in the list of "extension" structures. Following commits will enable this common logic on two BeagleBone platforms. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
* | pytest: add sandbox test for "extension" commandKory Maincent2021-05-131-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | This commit extends the sandbox to implement a dummy extension_board_scan() function and enables the extension command in the sandbox configuration. It then adds a test that checks the proper functionality of the extension command by applying two Device Tree overlays to the sandbox Device Tree. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> [trini: Limit to running on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge tag 'ti-v2021.07-rc3' of ↵Tom Rini2021-05-125-2/+234
|\ \ | |/ |/| | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-ti - Initial support for AM64 EVM and SK - K3 DDR driver unification for J7 and AM64 platforms. - Minor fixes for TI clock driver
| * board: ti: am64x: Parse MAC address from board EEPROMVignesh Raghavendra2021-05-121-0/+9
| | | | | | | | | | | | | | Parse MAC addresses from EEPROM and set them in the env. This is needed to get MAC address for additional ethernet ports on the EVM. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
| * configs: am64x_evm_a53: Enable support for reading eepromLokesh Vutla2021-05-121-0/+3
| | | | | | | | | | | | | | Enable relevant configs for reading eeprom data and updating env variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * board: ti: am64x: Add support for detecting multiple device treesLokesh Vutla2021-05-121-4/+9
| | | | | | | | | | | | Update the board_fit_config_name_match() to choose the right dtb. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * board: ti: am64x: Enable support for reading EEPROM in R5 SPLLokesh Vutla2021-05-121-0/+3
| | | | | | | | | | | | | | Include the relevant configs to enable support for reading EEPROM in R5SPL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * board: ti: am64x: Add support for reading eeprom dataLokesh Vutla2021-05-121-0/+92
| | | | | | | | | | | | | | | | | | | | I2C EEPROM data contains the board name and its revision. Add support for: - Reading EEPROM data and store a copy at end of SRAM - Updating env variable with relevant board info - Printing board info during boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * arm: mach-k3: am642: Add support for triggering ddr init from SPLDave Gerlach2021-05-121-0/+3
| | | | | | | | | | | | | | | | In SPL, DDR should be made available by the end of board_init_f() so that apis in board_init_r() can use ddr. Adding support for triggering DDR initialization from board_init_f(). Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
| * ram: k3-ddrss: Introduce top-level CONFIG_K3_DDRSSDave Gerlach2021-05-121-2/+2
| | | | | | | | | | | | | | | | | | Create a new CONFIG_K3_DDRSS option to select the common parts of the k3-ddrss driver. Also introduce a choice that depends on the top level option to select CONFIG_K3_J721E_DDRSS for j721e support, and update corresponding Kconfig as required. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
| * configs: am64x_evm_a53: Add Initial supportDave Gerlach2021-05-121-0/+1
| | | | | | | | | | | | Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
| * configs: am64x_evm_r5: Add Initial supportDave Gerlach2021-05-121-0/+7
| | | | | | | | | | | | Add initial R5 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
| * board: ti: am64x: Add board support for am64x evmDave Gerlach2021-05-123-0/+109
| | | | | | | | | | | | Add board specific initialization for am64x based boards. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
* | Merge tag 'u-boot-imx-20210502' of ↵Tom Rini2021-05-1136-9/+12529
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210502 ------------------- - mx6: fixes for Ventana - local fixes from maintainer - imx7d: Ronetix's iMX7-CM - imx8: Ronetix iMX8MQ-CM Engicam i.Core MX8M Compulab iot-gate-imx8 - Fixes i.MX8 documentation - Fixes phy usage with fec
| * | ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CMIlko Iliev2021-05-028-0/+2196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
| * | imx: Add support for Ronetix's iMX7-CM boardIlko Iliev2021-05-026-0/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
| * | imx: imx8: Update README with somewhat correct firmware versionsPriit Laes2021-05-021-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current setup instructions for i.MX8QM MEK board include somewhat conflicting instructions, so here's an attempt to fix it. After trying both sets of firmwares, I can conclude that both of them fail to work: - no boot at all with imx-sc-firmware-0.7 / firmware-imx-7.6 - partial success with imx-sc-firmware-1.1 / firmware-imx-8.0: U-Boot 2021.04-rc3-00135-ge0669a43c8 (Mar 08 2021 - 16:49:08 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK mu_hal_receivemsg timeout Build: SCFW 65afe5f6, SECO-FW 65afe5f6, ATF a-20190 mu_hal_receivemsg timeout sc_misc_get_boot_dev: res:16 Boot: SD0 DRAM: mu_hal_sendmsg timeout sc_rm_is_memreg_owned: mr:0 res:21 ... Signed-off-by: Priit Laes <priit.laes@paf.com>
| * | arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)Ying-Chun Liu (PaulLiu)2021-05-0213-0/+7932
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate). The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>
| * | imx: ventana: add delay before reading EEPROMTim Harvey2021-05-021-0/+1
| | | | | | | | | | | | | | | | | | fixes: d863d054397a ("imx: ventana: convert U-Boot to OF_CONTROL using FIT image") Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki2021-05-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki2021-05-026-0/+2065
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | board: ge: bx50v3: fix crystal bitSebastian Reichel2021-05-021-0/+26
| |/ | | | | | | | | | | | | | | | | The DA9063 enables the CRYSTAL bit by default, but there is no crystal populated on the BA16 system on module. Without explicitly clearing the CRYSTAL bit the system runs unstable and sometimes reboots unexpectedly. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* / ppc: Remove some SECURE_BOOT defconfigsTom Rini2021-05-112-9/+1
|/ | | | | | | | | | | These specific configs are missing a number of migrations. In addition, they are blocking completion of the now-expired DM_MMC migration as it requires enabling BLK. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Cc: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge tag 'xilinx-for-v2021.07-rc2' of ↵Tom Rini2021-04-294-6/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc2 xilinx: - Enable saving variables based on bootmode - Cleanup usb dfu setup and wire it up with usb bootmode - Fix bootscript address logic - Remove GD references (spi, Versal) - Enable capsule update clk: - Small Kconfig fix net: - Fix gmii2rgmii bridge binding usb: - Propagate error (dfu gadget)
| * xilinx: common: Fix boot script addressT Karthik Reddy2021-04-231-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently u-boot supports addresses upto 39-bits only. If anybody wants to use addresses of more than 39-bits in Linux they will have a separate memory node in DT. In such cases they will have multiple memory nodes. Currently u-boot selects and runs on lower memory bank region. But bootscript is being loaded on dram bank 0, where dram bank 0 will point to 1st memory node in DT. If first memory node is mentioned as higher ddr(>39-bits address) then u-boot cannot load the bootscript. So fix this issue by setting bootscript address within the lower memory bank region. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * xilinx: versal: Add usb dfu/thor distro boot supportT Karthik Reddy2021-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | Change "dfu_usb" to "usb_dfu" for better representation and change required macros. Add 60s timeout of dfu-utils to start transaction. Add support for usb thor to distro boot. Remove DFU_ALT_INFO_RAM as we use bootcmd_usb_dfu instead of dfu_ram. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * xilinx: zynqmp: Add usb dfu/thor distro boot supportT Karthik Reddy2021-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In usb boot mode distro boot should select usb device as primary boot device instead of usb host. So make usb dfu as primary boot device. But do not list it in boot_targets as fallback option because it is not classic mode for booting. Using 60s timeout by default should be enough time for dfu-utils to start transaction. In case none needs this please change timeout value in the command or disable CONFIG_DFU_TIMEOUT. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * xilinx: versal: Add support for saving env based on bootmodeAshok Reddy Soma2021-04-231-0/+30
| | | | | | | | | | | | | | | | | | | | Enable saving variables to MMC(FAT) and SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal platforms as well. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * xilinx: zynq: Add support for saving env based on bootmodeAshok Reddy Soma2021-04-231-0/+32
| | | | | | | | | | | | | | | | | | | | | | Enable saving variables to MMC(FAT), NAND, SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Since most of the flashes on zynq evaluation boards are 16MB in size, set default ENV_OFFSET to 15MB(0xE00000). Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | phy: marvell: rename comphy related definitions to COMPHY_XXIgal Liberman2021-04-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX. Those definition might be confused with MDIO PHY definitions. This patch does the following changes: - PHY_TYPE_XX --> COMPHY_TYPE_XX - PHY_SPEED_XX --> COMPHY_SPEED_XX This improves readability, no functional change. Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
* | arm: octeontx2: Add Octeon TX2 CN9130 CRB supportKonstantin Porotchkin2021-04-293-0/+58
| | | | | | | | | | | | | | | | This patch adds the base support for the Marvell Octeon TX2 CN9130 CRB. Not all interfaces are supported fully yet. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2024-06-01 12:45:39 +0000