summaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | | Fix support for PS/2 keyboard on TQM85xx boardsWolfgang Denk2006-07-191-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PS/2 keyobard driver for the TQM85xx modules only supports the internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't include a DUART, the TQM8560 modules can't be used with the PS/2 keyboard controller on the STK85xx board. The PS/2 keyboard driver should work with the modules TQM8540, TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. Make sure the PS/2 controller on the STK85xx is programmed. Jumper settings: X66 1-2, 9-10; X61 2-3 Patch by Martin Krause, 21 Jun 2006
| * | | | Adjust filenames for USB update images on TRAB board.Wolfgang Denk2006-07-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During an automatic update via USB stick, U-Boot searches for images with the name "firmware.img" and "kernel.img". This names are now changed to "firmw_01.img" and "kernl_01.img". This is done, to prevent updates of new boards (with the new macronics "c" step flashes) with old, incompatible firmware or kernel versions. Patch by Martin Krause, 21 Jun 2006
| * | | | Bugfix in VFD routine on TRAB board.Wolfgang Denk2006-07-191-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure upper lext pixel can be set to blue, too (so far only red was possible). Patch by Martin Krause, 15 Feb 2006
| * | | | Fix some bugs in TRAB board flash driver.Wolfgang Denk2006-07-191-14/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT - remove "Unlock Bypass" mode, because macronix flashes do not support this mode officially - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified for Intel compatible flashes, not for AMD compatible. Patch by Martin Krause, 15 Feb 2006
| * | | | Add additional error messages to flash driver on TRAB boardWolfgang Denk2006-07-191-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | (for erase errors and timeout errors) Patch by Martin Krause, 14 Feb 2006
| * | | | Add support for TB5200 boardWolfgang Denk2006-07-1919-210/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
| * | | | Add support for TQM885D board.Markus Klotzbuecher2006-07-122-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 20 Mar 2006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * | | | Support for spc1920 board.Markus Klotzbuecher2006-07-125-0/+470
| | | | | | | | | | | | | | | | | | | | Patch by Markus Klotzbuecher, 12 Jul 2006
| * | | | Fix error in flash protection calculation on MCC200 board.Wolfgang Denk2006-07-101-1/+1
| | | | |
| * | | | Major PCMCIA Cleanup to make code better readable and maintainable.Wolfgang Denk2006-07-1024-38/+3589
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Notes: - Board-dependend code for RPXLITE and RPXCLASSIC-based boards placed to the drivers/rpx_pmcia.c file to avoid duplication. Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c). - drivers/i82365.c has been split into two parts located at board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are the only boards using CONFIG_82365). - Changes were tested for clean build and *very* *few* boards.
| * | | Merge with /home/m8/git/u-bootWolfgang Denk2006-07-053-26/+10
| |\ \ \
| | * | | Fix AMCC bamboo eval board compilation errors.Marian Balakowicz2006-07-042-14/+1
| | | | |
| | * | | Cleanup config file and bootup output for Yucca board.Marian Balakowicz2006-07-031-12/+9
| | | | |
| * | | | Merge with /home/m8/git/u-bootWolfgang Denk2006-06-309-0/+3302
| |\| | |
| | * | | Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz2006-06-309-0/+3302
| | |\ \ \ | | | |/ / | | |/| |
| | | * | Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz2006-06-309-0/+3321
| | | | |
| * | | | Cleanup trab board for GCC-4.xWolfgang Denk2006-06-265-39/+40
| |/ / /
| * | | Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk2006-06-201-1/+1
| |\ \ \
| | * | | VoiceBlue update: use new MTD flash partitioning methods, use moreHeiko Schocher2006-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reasonable TEXT_BASE, update default environment and enable keyed autoboot. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
| * | | | Add support for wrPPMC7xx/74xx boardsHeiko Schocher2006-06-197-0/+1246
| | | | | | | | | | | | | | | | | | | | Patch from Richard Danter, 12 Aug 2005
| * | | | Merge with ssh://atlas/home/wd/git/u-boot/workWolfgang Denk2006-06-1918-518/+1616
| |\ \ \ \
| | * | | | Add support for gth2 boardWolfgang Denk2006-06-169-0/+1556
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Thomas Lange, Aug 11 2005
| | * | | | Fix DDR6 errata on TQM834x boardsWolfgang Denk2006-06-161-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Thomas Waehner, 07 Mar 2006
| | * | | | Remove obsolete flash driver board/tqm5200/flash.cWolfgang Denk2006-06-162-498/+0
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 11 Jan 2006
| | * | | | Add support for PS/2 keyboard on TQM85xx boardWolfgang Denk2006-06-161-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 07 Nov 2005 Tested on a STK85XX baseboard. Make sure the PS/2 controller has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
| | * | | | Fix TRAB channel switching delay for trab_fkt.bin standalone applikationWolfgang Denk2006-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 08 Nov 2005 In tsc2000_read_channel() the delay after setting the multiplexer to a temperature channel is increased from 1,5 ms to 10 ms. This is to allow the multiplexer inputs to stabilize after huge steps of the input signal level.
| | * | | | Adjust TQM5200 make targetsWolfgang Denk2006-06-161-18/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the automatic CS configuration the default. The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB and CONFIG_TQM5200_AC are removed. "TQM5200_config" is now the default for STK52XX.200 base boards. On a STK52XX.100 base board "TQM5200_STK100_config" must be used. Patch by Martin Krause, 07 Nov 2005
| | * | | | Fix setting of environment variable "ver" on trab boardWolfgang Denk2006-06-161-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The environment variable "ver" is now set before do_auto_update() is called, so that "ver" can be used in USB update scripts. Patch by Martin Krause, 27 Oct 2005
| | * | | | Fix wrong usage of udelay() in led_blink() on trab boardWolfgang Denk2006-06-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 27 Oct 2005
| | * | | | Fix udelay bug in vfd.c for trab boardWolfgang Denk2006-06-161-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 27 Oct 2005
| * | | | | Fix memory init problems on MCC200 boardWolfgang Denk2006-06-142-1/+50
| |/ / / /
| * | | | Minor code cleanup.Wolfgang Denk2006-06-104-5/+5
| | | | |
| * | | | Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk2006-06-1010-0/+1221
| |\ \ \ \
| | * | | | Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40Heiko Schocher2006-04-2614-0/+1018
| | | | | | | | | | | | | | | | | | | | | | | | Patch from Scott McNutt, 11 Aug 2005
| | * | | | * Update PK1C20 board for Nios-II 5.0Heiko Schocher2006-04-203-40/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Scott McNutt, 11 Aug 2005 -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code
| | * | | | Add MCF5282 support (without preloader)Heiko Schocher2006-04-2010-0/+1221
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | relocate ichache_State to ram u-boot can run from internal flash Add EB+MCF-EV123 board support. Add m68k Boards to MAKEALL Patch from Jens Scharsig, 08 Aug 2005
| * | | | | Merge with http://www.psyent.com/git/uboot (NIOS2 - Scott McNutt)Wolfgang Denk2006-06-1017-40/+1051
| |\ \ \ \ \
| | * | | | | Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boardsScott McNutt2006-06-0814-0/+1018
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Scott McNutt, 08 Jun 2006
| | * | | | | Update PK1C20 boardScott McNutt2006-06-083-40/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code Patch by Scott McNutt, 08 Jun 2006
| * | | | | | Fix U-Boot enviroenment sector protection on MCC200 boardWolfgang Denk2006-06-091-1/+1
| |/ / / / /
* | | | | | Merge branch 'mpc86xx'Jon Loeliger2006-08-092-0/+54
|\ \ \ \ \ \ | | |_|_|_|/ | |/| | | |
| * | | | | Add Rapidio support for the MPC8641HPCNJohn Traill2006-08-092-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: John Traill <john.traill@freescale.com>
* | | | | | Merge branch 'mpc86xx'Jon Loeliger2006-07-312-1/+65
|\| | | | |
| * | | | | Correct the irq value of DUART2Haiying Wang2006-07-311-1/+1
| | | | | |
| * | | | | Move get_board_sys_clk to board directoryHaiying Wang2006-07-311-0/+64
| | | | | |
* | | | | | Merge branch 'mpc86xx'Jon Loeliger2006-07-271-61/+75
|\| | | | |
| * | | | | Fixed OF device tree of mpc86xxhpcn board.Zhang Wei2006-07-271-61/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The changes works in with kernel irq mapping rework. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
* | | | | | Merge branch 'mpc86xx'Jon Loeliger2006-07-132-1/+245
|\| | | | |
| * | | | | Add support for reading and writing mac addresses to or from ID EEPROM.Haiying Wang2006-07-132-1/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). With attached patch, we can use command "mac/mac read/mac save/" to read and write EEPROM under u-boot prompt. U-boot will calculate the checksum of EEPROM while bootup, if it is right, then u-boot will check whether the mac address of eTSEC0/1/2/3 is availalbe (non-zero). If there is mac address availabe in EEPROM, u-boot will use it, otherewise, u-boot will use the mac address defined in MPC8641HPCN.h. This matches the requirement to set unique mac address for each TSEC port. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* | | | | | Merge branch 'mpc86xx'Jon Loeliger2006-06-222-40/+56
|\| | | | |
generated by cgit (git 2.34.1) at 2024-09-20 17:52:55 +0000