summaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* dm: arm: imx: cx9020: migrate to dm_videoSteffen Dirkwinkel2019-05-203-39/+25
| | | | | | | | Enable DM_VIDEO in config and don't overwrite console so it can be set from environment Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
* dm: arm: imx: cx9020: enable DM_GPIOSteffen Dirkwinkel2019-05-202-4/+22
| | | | | | | | | | | | Switch to DM_GPIO and add gpio_request where necessary. This is needed for DM_VIDEO and fixes an issue with sd card detection which was introduced by the combination of these commits: commit 7a0425dd969c ("mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops") commit 7e04b4c751a1 ("dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC") Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
* arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] boardWolfgang Grandegger2019-05-147-0/+1325
| | | | | | | | | | | | | | | | Re-add support for Aries Embedded MCV SoM, which is CycloneV based and the associated MCVEVK and MCVEVP baseboard. The board can boot from eMMC. Ethernet and USB is supported. The Aries Embedded boards have been removed with commit 03b54997d568 ("board/aries: Remove"). I will now take care of them. The device-tree files are from mainline Linux commit e93c9c99a629 ("Linux v5.1)". Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de> CC: Marek Vasut <marex@denx.de> CC: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2019-05-131-0/+38
|\ | | | | | | - A10 FPGA programming support, Gen5 livetree conversion
| * ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDKTien Fong Chee2019-05-101-0/+38
| | | | | | | | | | | | Add default fitImage file bundling FPGA bitstreams for Arria10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
* | sh: shmin: Remove the boardMarek Vasut2019-05-105-137/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
* | sh: ms7720se: Remove the boardMarek Vasut2019-05-105-250/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
* | sh: mpr2: Remove the boardMarek Vasut2019-05-105-288/+0
| | | | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Mark Jonas <mark.jonas@de.bosch.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
* | sh: rsk7269: Remove the boardMarek Vasut2019-05-105-266/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
* | sh: rsk7264: Remove the boardMarek Vasut2019-05-105-294/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
* | sh: rsk7203: Remove the boardMarek Vasut2019-05-105-287/+0
|/ | | | | | | | | | | Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
* Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchipTom Rini2019-05-092-0/+84
|\ | | | | | | | | | | | | | | | | | | | | | | | | Improvements and new features: - split more rockchip pinctrl_core feature into per SoC - enable TPL for evb-rk3399 board - enable TPL/SPL for evb-px5 board - enable TPL and OP-TEE support for evb-rk3229 - update fix in arm common assembly start code for rockchip header file - update default SPL_FIT_GENERATOR for rockchip - rk3399 boards update to use '-u-boot.dtsi' - add new rk3399 boards: Nanopi M4, Nanopc T4 - enable sound for chromebook_minnie
| * rockchip: rk3399: Add Nanopc T4 board supportJagan Teki2019-05-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Nanopc T4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - 16GB eMMC - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Add NanoPC-T4 IR receiver" (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3) Tested-by: Daniel Gröber <dxld@darkboxed.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| * rockchip: rk3399: Add Nanopi M4 board supportJagan Teki2019-05-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Nanopi M4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - eMMC socket - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - USB 3.0 x4 - USB Type C power and data - GPIO1, GPIO2 expansion ports - DC5V/3A Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Refine nanopi4 differences" (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * rockchip: evb-rk3229: add README file for OP-TEE supportKever Yang2019-05-081-0/+72
| | | | | | | | | | | | Detail of step by step to bring up the board with OP-TEE support. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | Merge git://git.denx.de/u-boot-marvellTom Rini2019-05-097-0/+143
|\ \ | | | | | | | | | | | | | | | - DM updates for multiple MVEBU boards (Stefan) - Add CRS305-1G-4S board (Luka) - Enable MMC in SPL on clearfog (Baruch)
| * | arm: mvebu: Add CRS305-1G-4S boardLuka Kovacic2019-05-097-0/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRS305-1G-4S has a switch chip with an integrated CPU (98DX3236) and like some of the other similar boards requires bin_hdr. bin_hdr (DDR3 init stage) is currently retrieved from the stock bootloader and compiled into the kwb image. Adds support for U-Boot, enable UART, SPI, Winbond SPI flash chip support and writing env to SPI flash. Signed-off-by: Luka Kovacic <me@lukakovacic.xyz> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge git://git.denx.de/u-boot-riscvTom Rini2019-05-093-5/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | - Correct SYS_TEXT_BASE for qemu. - Support booti. - Increase SYSBOOTM_LEN for Fedora/RISCV kernel. - Support SMP booting from flash.
| * | | riscv: configs: AE350 will use CONFIG_OF_SEPARATE when boots from flashRick Chen2019-05-091-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When AE350 boots from flash, use CONFIG_OF_SEPARATE instead of CONFIG_OF_BOARD. Also remove unused code about prior_stage_fdt_address. And modify CONFIG_SYS_FDT_BASE as flash address. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
| * | | riscv: configs: Support AE350 SMP booting from flash flowRick Chen2019-05-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add two defconfigs to support AE350 SMP booting from flash. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
| * | | riscv: qemu: Use correct SYS_TEXT_BASE for S-mode on 32bit systemAnup Patel2019-05-091-1/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 32bit system, the OpenSBI (or BBL) will jump to 0x80400000 address in S-mode whereas for 64bit system it will jump to 0x80200000 address in S-mode. Currently, the S-mode U-Boot sets SYS_TEXT_BASE to 0x80200000 for both 32bit and 64bit system. This breaks S-mode U-Boot for 32bit system. This patch sets different SYS_TEXT_BASE for 32bit and 64bit system so that S-mode U-Boot works fine for both. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Karsten Merker <merker@debian.org>
* | | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2019-05-081-18/+18
|\ \ \ | |/ / |/| | | | | | | | - Various PHY fixes / enhancements. - TI K2G fixes
| * | ARM: k2g-ice: Add pinmux support for rgmii interfaceMurali Karicheri2019-05-081-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add pinmux configuration for rgmii interface so that network driver can be supported on K2G ICE boards. The pinmux configurations for this are generated using the pinmux tool at https://dev.ti.com/pinmux/app.html#/default As this required some BUFFER_CLASS definitions, same is re-used from the linux defnitions in include/dt-bindings/pinctrl/keystone.h Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ARM: k2g-gp-evm: update to rgmii pinmux configurationMurali Karicheri2019-05-081-9/+9
| |/ | | | | | | | | | | | | | | | | | | This patch updates pinmux configuration for K2G GP EVM based on data generated by the pinmux tool at https://dev.ti.com/pinmux/app.html#/default Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2019-05-081-0/+12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | - H6 Beelink GS1 board (Clément) - Olimex A64-Teres-I board (Jonas) - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej) - Change include order (Jagan) - EPHY clock changes (Jagan) - EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
| * | sun50i: a64: Add Olimex A64-Teres-I board initial supportJonas Smedegaard2019-05-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Olimex A64-Teres-I board is a mainboard (the only one so far) for Olimex Teres-I DIY laptop kit. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - MicroSD Slot - 16GB eMMC Flash - eDP LCD display - HDMI - USB Host - Battery management - 5V DC power supply - Certified Open Source Hardware (OSHW) Works: - i2C - MMC/SD - PWM backlight Known broken: - Internal keyboard (seems to be because the keyboard firmware loads a bootloader first, and then disconnects bootloader and connect real keyboard). External ones connected to the USB port work fine. This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree). Linux commit details about the sun50i-a64-teres-i.dts sync: "arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins" (sha1: d91ebb95b96c8840932dc3a10c9f243712555467) Cosmetic warnings regarding whitespace and placement of SPDX notice for dts file was ignored. config and .dtsi file are adapted from pinebook files. Tested-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: move board entry in MAINTAINERS file at proper position] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: dts: h6: Add Beelink GS1 initial supportClément Péron2019-04-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - 16GB eMMC - AXP805 PMIC - 1Gbps GMAC via RTL8211E - USB 2.0 and 3.0 Host - HDMI port - S/PDIF port - 5V/2A DC power supply - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS) Linux commit details about the sun50i-h6-beelink-gs1.dts sync: "arm64: dts: allwinner: h6: Introduce Beelink GS1 board" (sha1: 089bee8dd119ba084dee6b17a2e1a53df4f30193) Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* | | x86: samus: Add a target to boot through TPLSimon Glass2019-05-083-2/+27
| |/ |/| | | | | | | | | | | | | | | Add a version of samus which supports booting from TPL to SPL and then to U-Boot. This allows TPL to select from an A or B SPL to support verified boot with field upgrade. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | ARM: dts: renesas: Add RZ/A1 GR-Peach boardChris Brandt2019-05-075-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: sh7785lcr: Remove the boardMarek Vasut2019-05-079-1096/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
* | sh: ecovec: Remove the boardMarek Vasut2019-05-075-321/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
* | sh: sh7757lcr: Fix copy-paste error in READMEMarek Vasut2019-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | Update the README to use the correct defconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2019-05-063-12/+72
|\ \ | | | | | | | | | - Various pinctrl / gpio fixes for R-Car
| * | ARM: renesas: Configure DRAM size from ATF DT fragmentMarek Vasut2019-05-043-12/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATF can pass additional information via the first four registers, x0...x3. The R-Car Gen3 with mainline ATF, register x1 contains pointer to a device tree with platform information. Parse this device tree and extract DRAM size information from it. This is useful on systems where the DRAM size can vary between configurations. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | board: toradex: drop support.arm maintainer emailMarcel Ziswiler2019-05-052-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Drop Toradex ARM Support <support.arm@toradex.com> from maintainer email list as this just clogs our support ticketing system. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
* | | board: ti: am43xx: Enable hardware levelingBrad Griffis2019-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the RDLVL_MASK, RDLVLGATE_MASK, WRLVL_MASK & enable PHY_INVERT_CLKOUT to enable Hardware leveling for am437x as recommended by EMIF Tools app note: http://www.ti.com/lit/an/sprac70/sprac70.pdf Signed-off-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
* | | board: ti: am654: select SYS_DISABLE_DCACHE_OPS for arm64 buildVignesh Raghavendra2019-05-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | AM654 SoC is IO coherent wrt A53 cores, therefore enable SYS_DISABLE_DCACHE_OPS to avoid cache operations in A53 SPL/U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* | | Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mipsTom Rini2019-05-043-3/+39
|\ \ \ | |/ / |/| | | | | | | | | | | - mscc: small fixes, enhance network support for Serval, Luton and Ocelot - mt7620: rename arch to more generic name mtmips - mips: pass initrd addresses via DT as physical addresses
| * | board: mscc: luton: Update MSCC Luton boardHoratiu Vultur2019-05-031-2/+11
| | | | | | | | | | | | | | | | | | | | | Implement method board_phy_config to configure the external phys on the pcb90. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
| * | board: mscc: ocelot: Update MSCC Ocelot board.Horatiu Vultur2019-05-031-0/+15
| | | | | | | | | | | | | | | | | | Implement method board_phy_config to configure the phy for pcb120. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
| * | board: mscc: serval: Update MSCC Serval boardsHoratiu Vultur2019-05-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | In Serval SoC family there are 2 different pcb, both of them have the same phy, but with different version. Therefore implement board_phy_config and set all the phys in the same way. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
| * | board: mscc: serval: Fix board detectHoratiu Vultur2019-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When detecting the board, it was reading a register in the GPIO page of the phy and based on that value it was making a decision. The bug was that after the GPIO page for the first phy was set it was not reseted back. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
* | | Merge git://git.denx.de/u-boot-marvellTom Rini2019-05-032-167/+185
|\ \ \ | | | | | | | | | | | | | | | | - Fix in kwbimage (return code checking) (Young Xiao) - Misc updates to Turris Omnia (Marek)
| * | | arm: mvebu: turris_omnia: add RESET button handlingMarek Behún2019-05-031-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a Factory RESET button on the back side of the Turris Omnia router. When user presses this button before powering the device up and keeps it pressed, the microcontroller prevents the main CPU from booting and counts how long the RESET button is being pressed (and indicates this by lighting up front LEDs). The idea behind this is that the user can boot the device into several Factory RESET modes. This patch adds support for U-Boot to read into which Factory RESET mode the user booted the device. The value is an integer stored into the omnia_reset environment variable. It is 0 if the button was not pressed at all during power up, otherwise it is the number identifying the Factory RESET mode. This patch also changes bootcmd to a special hardcoded value if Factory RESET button was pressed during device powerup. This special bootcmd value sets the colors of all the LEDs on the front panel to green and then tries to load the rescue image from the SPI flash memory and boot it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: turris_omnia: fix regdomain env var settingMarek Behún2019-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The regdomain environment variable is set according to value read from EEPROM. This has to be done in board_late_init, after the environment variables are read from SPI. Select CONFIG_BOARD_LATE_INIT in Kconfig for the Turris Omnia target. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: turris_*: remove watchdog includeMarek Behún2019-05-032-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board watchdog is now unified and not handled in board files, remove the unnecessary includes. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: turris_omnia: print board info as Turris MoxMarek Behún2019-05-031-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unify the way how Omnia and Mox print board information (RAM size and serial number). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: turris_omnia: refactor more codeMarek Behún2019-05-031-30/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor RAM size reading from EEPROM in preparation for next patch. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: turris_omnia: move ATSHA204A from defconfig to KconfigMarek Behún2019-05-031-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver is required for Turris Omnia to read ethernet addresses. Move the dependency from turris_omnia_defconfig to Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: turris_omnia: fix checkpatch warningsMarek Behún2019-05-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2025-01-09 11:07:53 +0000