summaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* board: xilinx: Enable changing default DTB pick up addressMichal Simek2020-09-231-1/+1
| | | | | | | | | | | U-Boot on xilinx boards is checking one address where DTB can be placed as the first location for DTB. Originally this code was developed for Versal where QEMU was putting generated DTB for U-Boot to use. The patch enables changing this address which is necessary for cases where default address is pointing to location (DDR) which is not present. The access to this location can cause exception. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* x86: edison: Move config SYS_MALLOC_LEN to KconfigAndy Shevchenko2020-09-211-0/+3
| | | | | | | | | | This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker2020-09-172-1/+1
| | | | | | | | The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker2020-09-172-1/+1
| | | | | | | | The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_imx7: wrap video specific funcs with ifdefsIgor Opaniuk2020-09-171-0/+2
| | | | | | | Wrap video specific functionality with ifdefs. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* toradex: drop legacy show_boot_logo function and use splashscreenIgor Opaniuk2020-09-171-19/+0
| | | | | | | | Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk2020-09-171-2/+0
| | | | | | | | Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk2020-09-171-2/+0
| | | | | | | | Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 391c712dde("colibri-imx6ull: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* rockchip: rv1108: use correct API for board callbackKever Yang2020-09-162-2/+2
| | | | | | | | | | | | Use board_early_init_f() instead of mach_cpu_init() for board, the board_early_init_f() is used for board init and after dm_initf, while the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able to use syscon API). Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base") Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2020-09-034-4/+20
|\ | | | | | | - Mostly DFU fixes and r8152 fixes
| * fastboot: Extend fastboot_set_reboot_flag with reboot reasonRoman Kovalivskyi2020-09-014-4/+20
| | | | | | | | | | | | | | Extend fastboot_set_reboot_flag arguments with reboot reason so that it could handle different reboot cases in future. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
* | x86: qemu: Remove dead codeAndy Shevchenko2020-09-013-9/+1
| | | | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply replace the rule in it. We use stub C-file like it's done for other boards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: slimbootloader: Remove dead codeAndy Shevchenko2020-09-012-10/+1
| | | | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: minnowmax: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: galileo: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: edison: Remove dead codeAndy Shevchenko2020-09-012-13/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: crownbay: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: cougarcanyon2: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: cherryhill: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: intel: bayleybay: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: efi: efi-x86_payload: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: dfi: dfi-bt700: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: coreboot: Remove dead codeAndy Shevchenko2020-09-012-13/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: congatec: conga-qeval20-qa3-e3845: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: advantech: som-db5800-som-6867: Remove dead codeAndy Shevchenko2020-09-012-9/+1
| | | | | | | | | | | | | | | | | | | | start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Introduce USE_EARLY_BOARD_INIT optionAndy Shevchenko2020-09-013-0/+3
|/ | | | | | | | | | Introduce USE_EARLY_BOARD_INIT option and select it by the actual users. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge tag 'ti-v2020.10-rc4' of ↵Tom Rini2020-08-311-12/+6
|\ | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Update to ABI 3.0 - Fix i2c write in eeprom driver
| * ti: common: Remove additional i2c read for board detectionMichal Simek2020-08-311-12/+6
| | | | | | | | | | | | | | | | | | | | There shouldn't be a need to call additional i2c read if above failed already. Based on comment it should be enough to try to detect legacy boards which are mentioned in the comment. Fixes: 2463f6728e82 ("ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT") Fixes: 0bea813d0018 ("ARM: omap-common: Add standard access for board description EEPROM") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | arm: mvebu: Espressobin: Setup MTD partitions when booting kernelPali Rohár2020-08-311-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to different partition layouts in different U-Boot versions, DTS for Espressobin in Linux does not contain any definition of MTD partitions. See commit https://git.kernel.org/stable/c/00954566464a4 for more details. This patch via ft_board_setup() hook fills current partition layout used by U-Boot, so booted kernel would see correct MTD partitions layout. U-Boot env partition is calculated from CONFIG_ENV_OFFSET option. First partition contains secure firmware, ARM trusted firmware and U-Boot with checksums. So it is not possible to replace just one image (e.g. U-Boot) without updating other parts where is stored checksum of U-Boot. Therefore there is no extra partition defined for U-Boot and first partition is called just 'firmware'. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Tested-by: Andre Heider <a.heider@gmail.com>
* | arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan portsPali Rohár2020-08-311-0/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default Topaz switch on Espressobin board forwards packets between all ethernet ports, including CPU (port 0), wan (port 1) and lan (ports 2,3). This default U-Boot setup is unsuitable for using Espressobin as router as it opens security hole in forwarding all packets between wan and lan ports. E.g. dhcp packets from wan network leaks to lan network during small time window until U-Boot boots Linux kernel which loads network drivers which disallows forwarding between wan and lan. This patch fixes above problem. For Espressobin board prior putting Topaz switch into forwarding mode, Topaz switch is reconfigured to allow forwarding packets from wan and lan ports only to CPU port. This ensures that packets from wan port are not forwarded to lan ports and vice-versa. Packets from CPU port are still forwarded to all other ports, so U-Boot network boot works with any ethernet port as before. This problem was already discussed on Espressobin forum [1] and on Marvell's github issue tracker [2]. As a workaround people on Espressobin forum patched U-Boot to completely disable lan ports on Topaz switch which prevented forwarding packets. That workaround had an issue that U-Boot was unable to netboot via lan ports anymore. Change in this patch does not have such issue. This security issue has been dicussed here as well: [3]. [1] - https://web.archive.org/web/20191231164238/http://espressobin.net/forums/topic/boot-behavior-of-the-switch-and-security/ [2] - https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/issues/18 [3] - https://forum.armbian.com/topic/12635-espressobin-uboot-security-concerns-switch-init-portmask/ Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
* Merge tag 'u-boot-imx-20200825' of ↵Tom Rini2020-08-254-62/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - mx6: SOCs user selectable Fix for imx6q_logic Some DM conversion - mx7: introduce secondary boot device Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/720918010 Signed-off-by: Tom Rini <trini@konsulko.com>
| * arm: mx6: Make all i.MX6 SoCs user-selectableTom Rini2020-08-253-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a number of platforms that are a combination of a carrier board and System-on-Module (SoM) that in turn allows for the board to have different SoCs on it. In some cases, this is handled via board-specific Kconfig options. In other cases we make use of CONFIG_SYS_EXTRA_OPTIONS. This latter case however can lead to invalid configurations as we will not in turn get options that in Kconfig are selected by or depend on that setting. To resolve this, make the SoC option a choice in Kconfig and make boards depend on what they can support. This change opens us up for further clean-ups in the cases where a single CONFIG_TARGET_xxx can support different SoCs and today they do not, or do not cleanly do so. Reported-by: Matt Porter <mporter@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Soeren Moch <smoch@web.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Heiko Schocher <hs@denx.de> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de> Cc: Ludwig Zenz <lzenz@dh-electronics.de> Cc: Lukasz Majewski <lukma@denx.de> Cc: Akshay Bhat <akshaybhat@timesys.com> Cc: Ken Lin <Ken.Lin@advantech.com.tw> Cc: Ian Ray <ian.ray@ge.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Cc: Simone CIANNI <simone.cianni@bticino.it> Cc: Adam Ford <aford173@gmail.com> Cc: Marcin Niestroj <m.niestroj@grinn-global.com> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Cc: Eric Nelson <eric@nelint.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Parthiban Nallathambi <parthiban@linumiz.com> Cc: Marek Vasut <marex@denx.de> Cc: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Niel Fourie <lusus@denx.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Richard Hu <richard.hu@technexion.com> Cc: Stefan Roese <sr@denx.de> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org> Cc: Silvio Fricke <open-source@softing.de> Tested-by: Matt Porter <mporter@konsulko.com> [colibri_imx6] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
| * pico-imx6ul: convert ethernet function to DM_ETHWig Cheng2020-08-181-53/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove pinmux definition from pico-imx6ul.c - Enable NET_RANDOM_ETHADDR for temporary solution, because micrel_ksz8xxx driver does not support DM_ETH yet, so cannot read MAC address directly. Before enable DM_ETH: Net: FEC [PRIME] After enable DM_ETH: Net: Warning: using random MAC address - ca:3f:43:8f:67:d4 eth1: ethernet@20b4000 Here is the test commands: => dhcp BOOTP broadcast 1 DHCP client bound to address 10.88.88.94 (139 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ping 8.8.8.8 Using ethernet@20b4000 device host 8.8.8.8 is alive Signed-off-by: Wig Cheng <wig.cheng@technexion.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini2020-08-2515-47/+1175
|\ \ | | | | | | | | | | | | | | | | | | - Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
| * | arm: octeontx2: Add support for OcteonTX2 SoC platformsSuneel Garapati2020-08-257-0/+606
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
| * | arm: octeontx: Add support for OcteonTX SoC platformsSuneel Garapati2020-08-257-0/+569
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for all OcteonTX 81xx/83xx boards from Marvell. For 81xx boards, use octeontx_81xx_defconfig and for 83xx boards, use octeontx_83xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
| * | ARM: renesas: Drop unnecessary function ft_board_setup()Stefan Roese2020-08-251-47/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marek explained on IRC, that ft_board_setup() is not used / necessary at all. So its best to just drop it completely, as it interferes with the cleanup of CONFIG_MAX_PCI_REGIONS (completely removed). Signed-off-by: Stefan Roese <sr@denx.de> Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | Merge tag 'u-boot-rockchip-20200820' of ↵Tom Rini2020-08-251-1/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3399 evb sdcard support - Fix for SPL_LED support
| * | | rockchip: firefly-rk3288: Fix the code support for SPL_LEDKever Yang2020-08-211-1/+3
| | |/ | |/| | | | | | | | | | | | | Fix the build error for the wrong code when CONFIG_SPL_LED is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini2020-08-251-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Sipeed Maix support S-mode. - Provide command sbi. - Use fdtdec_get_addr_size_auto_parent to get fu540 cache base address. - Fix a compiler error with CONFIG_SPL_SMP=n. - Fix sifive ram driver 32 compiler warnings. - Fix kendryte/pll.h redefine nop() warning.
| * | | configs: defconfig for Sipeed Maix in S-modeHeinrich Schuchardt2020-08-251-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a defconfig that can be used to build U-Boot for the Maix boards running upon OpenSBI. Update the documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
* | | MAINTAINERS: Add maintainers to XEN sectionAnastasiia Lukianenko2020-08-241-1/+2
| | | | | | | | | | | | | | | Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and ↵Anastasiia Lukianenko2020-08-241-5/+0
| | | | | | | | | | | | | | | | | | | | | board_early_init_f function Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | board: armltd: Add support for Total Compute platformUsama Arif2020-08-244-0/+92
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Total Compute is based on ARM architecture and has the following features enabled in u-boot: - PL011 UART - PL180 MMC - NOR Flash - FIT image with Signature - AVB Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | xilinx: common: Change bootm_size variable settingMichal Simek2020-08-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | Linux kernel for arm32 requires dtb and initrd to be placed in low memory to work properly. This requirement is described in chapter 4b) and 5) in Linux documentation (Documentation/arm/booting.rst). There is an issue on arm32 with 2GB of memory that bootm_size is bigger than Linux lowmem (for example with VMSPLIT_3G). That's why limit bootm size on these systems not to be above 768MB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | xilinx: common: Check return value from variable setupMichal Simek2020-08-201-3/+8
| | | | | | | | | | | | | | env_set..() can failed that's why check return status and report it back to make sure that user is aware that's something went wrong. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | xilinx: common: Get rid of initrd_high variable setupMichal Simek2020-08-201-6/+0
| | | | | | | | | | | | | | When bootm_low/bootm_size are setup properly there is no need to setup any initrd_high address. Location for initrd is determined through LMB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | xilinx: Change logic around zynq_board_read_rom_ethaddr()Michal Simek2020-08-201-3/+2
| | | | | | | | | | | | | | | | There is no reason to build private function when CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET is not defined. There is already weak function which handles default case properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek2020-08-203-0/+15
| | | | | | | | | | | | | | Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | xilinx: zynqmp: remove chip_id functionIbai Erkiaga2020-08-201-37/+20
| | | | | | | | | | | | | | | | | | Remove chip_id function and integrate the firmware call in the zynqmp_get_silicon_idcode_name function. The change avoids querying the firmware twice and makes the code bit more clear. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-09 12:28:30 +0000