summaryrefslogtreecommitdiffstats
path: root/board/toradex
Commit message (Collapse)AuthorAgeFilesLines
* toradex: configblock: avoid line continuationsMarcel Ziswiler2019-07-191-9/+6
| | | | | | | | | Fix issue as reported by checkpatch.pl. Leave long lines as line continuation in text output is not recommended. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* toradex: configblock: fix apalis imx8 targetMarcel Ziswiler2019-07-191-1/+14
| | | | | | | | | | The Apalis iMX8 was missing the interactive part should a customer have bricked his module and want to re-create the configuration block. Fix this. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* toradex: configblock: fix colibri imx8x targetMarcel Ziswiler2019-07-191-4/+14
| | | | | | | | | | | The Colibri iMX8X target got re-named late in the cycle which we forgot to reflect here. Furthermore, it was missing the interactive part should a customer have bricked his module and want to re-create the configuration block. Fix this. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* toradex: configblock: generic wi-fi/bt handlingMarcel Ziswiler2019-07-191-7/+9
| | | | | | | | | | Make the interactive Wi-Fi/BT handling generic by pulling it out of the Colibri iMX6ULL interactive part to be re-used for Apalis iMX8 and Colibri iMX8X. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* toradex: configblock: initialize MMC before switching partitionStefan Agner2019-07-191-0/+4
| | | | | | | | | | | | | | | | If the module is in serial downloader mode, we do no longer read the environment from eMMC. Therefor, the eMMC is unitialized when trying to read the config block. Use mmc_init to initialize the selected MMC device before using it. Note: In case the MMC has already been initialized, the mmc_init detects that and returns immediately. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* arm: imx8: don't duplicate build_info()Anatolij Gustschin2019-07-192-26/+0
| | | | | | | | | Move build_info() to common place. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* arm: imx8: factor out uart init codeAnatolij Gustschin2019-07-192-27/+6
| | | | | | | | | | | New imx8 boards started adding duplicated UART init code. Factor out this to common function sc_pm_setup_uart(). Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* Convert to use fsl_esdhc_imx for i.MX platformsYangbo Lu2019-06-233-7/+7
| | | | | | | | | | | Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
* board: toradex: add apalis imx8qm 4gb wb it v1.0b module supportMarcel Ziswiler2019-06-116-0/+284
| | | | | | | | | | | | | | | | | | | | | This commit adds initial support for the Toradex Apalis iMX8QM 4GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Gigabit Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QM as of yet. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
* ARM: imx: apalis_imx6: Drop ad-hoc SATA bindingMarek Vasut2019-06-111-49/+0
| | | | | | | | | | | | | Drop the ad-hoc AHCI binding code, this is superseded by CONFIG_DWC_AHSATA_AHCI=y resp. drivers/ata/dwc_ahsata.c Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* board: toradex: add colibri imx8qxp 2gb wb it v1.0b module supportMarcel Ziswiler2019-06-116-0/+295
| | | | | | | | | | | | | | | | | | | | | | This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* board: toradex: drop support.arm maintainer emailMarcel Ziswiler2019-05-052-2/+0
| | | | | | | | Drop Toradex ARM Support <support.arm@toradex.com> from maintainer email list as this just clogs our support ticketing system. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
* board: toradex: tdx-cfg-block: add new skusMarcel Ziswiler2019-04-252-0/+14
| | | | | | | | | | | | | | Add all the latest new SKUs: - Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT - Apalis iMX8 QuadMax 4GB IT - Apalis iMX8 QuadPlus 2GB Wi-Fi / BT - Apalis iMX8 QuadPlus 2GB", - Colibri iMX8 QuadXPlus 2GB IT - Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth - Colibri iMX8 DualX 1GB Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* board: toradex: tdx-cfg-block: clean-up sku handlingMarcel Ziswiler2019-04-252-14/+20
| | | | | | | Clean-up handling of several SKUs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx6ull: migrate usb to using driver modelMarcel Ziswiler2019-04-251-48/+0
| | | | | | | | | Migrate USB to using driver model. Add USBH_PEN GPIO regulator. While at it also add alias e.g. as required for UMS. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx6ull: migrate mmc to using driver modelMarcel Ziswiler2019-04-251-70/+0
| | | | | | | | | | Migrate MMC to using driver model. Migrate USDHC to using pinctrl. While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx6ull: migrate pinctrl and regulators to dtb/dmMarcel Ziswiler2019-04-251-76/+6
| | | | | | | | | | | Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* board: imx6ull: Add disable PMIC_STBY_REQPhilippe Schenker2019-04-251-0/+10
| | | | | | | | | | | Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the SOC to request for a lower voltage during sleep. This is necessary because the voltage is changing too slow for the SOC to wake up properly. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx6ull: fix ethernet phy power onMarcel Ziswiler2019-04-251-0/+3
| | | | | | | | Just give the new Ethernet PHY power save mode circuitry time to settle. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri-imx6ull: set module variant depending on config blockStefan Agner2019-04-251-3/+9
| | | | | | | | | | | Using CPU temperature grading as a discriminator if the Wi-Fi / Bluetooth chip is populated is no longer possible due to upcoming SKUs. Set variant to -wifi only if a valid config block is present and the product id mentions a SKU with Wi-Fi / Bluetooth. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* tdx-cfg-block: simplify i.MX 6 module detectionStefan Agner2019-04-251-34/+34
| | | | | | | | | | | Use CONFIG_TARGET_... at compile time to differentiate between Apalis iMX6, Colibri iMX6 and Colibri iMX6ULL. Avoid code duplication by moving question about Wi-Fi / Bluetooth before IT/non-IT decision. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* tdx-cfg-block: add support for new colibri iMX6ull skusGerard Salvatella2019-04-252-15/+50
| | | | | | | | | | Add support for new Colibri iMX6ULL SKUs. While at it also checkpatch fix the whole files. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_vf: fix tab vs. spacesMarcel Ziswiler2019-04-251-1/+1
| | | | | | | Fix indentation using tab vs. spaces. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* tdx-cfg-block: fix off by one issueMarcel Ziswiler2019-04-131-1/+1
| | | | | | | | | | | | | | | Fix toradex_modules array off by one issue potentially leading to spurious printout during boot e.g. Model: Toradex V1.2A, instead of Model: Toradex UNKNOWN MODULE V1.2A. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* toradex: common: unify behaviour when config block is missingBhuvanchandra DV2019-04-131-16/+18
| | | | | | | | | | If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* toradex: configblock: add an -y parameter to 'cfgblock create’Dominik Sliwa2019-04-131-13/+26
| | | | | | | | | | Add an optional -y parameter to 'cfgblock create’ to simplify automation. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_vf: use leveling evaluated by DDR validation toolsStefan Agner2019-04-131-0/+7
| | | | | | | | | | | | | | | | | The DDR validation tool (which is part of Processor Expert) allows to evaluate leveling parameters for CR105/CR106/CR110. Several runs have been made with Colibri VF50 and VF61 and it seems to evaluate very similar values. Use this values by default. Note: The newly evaluated parameters seem to require CTLUPD_AREF to be enabled! Note 2: The tool also evaluated 6 as a new value for PHY02/18 GATE_CFG (Coarse adjust of gate open time). However, this seems not to work in practise. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_vf: adjust timing according to data sheetStefan Agner2019-04-131-3/+9
| | | | | | | | | | Using the DDR Validation tool in Processor Expert uncovered two timing inconsistencies. Since those timings are related to the suspend mode they do not affect or change regular memory behaviour. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_vf: sync the board info messageBhuvanchandra DV2019-04-131-2/+2
| | | | | | | | Use similar info message as on other modules. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_vf: migrate fec, esdhc, nfc and usb to driver modelMarcel Ziswiler2019-04-131-81/+1
| | | | | | | | | | | | | | Migrate FEC, ESDHC, NFC and USB to driver model. While at it also do no longer enable optional I2C clock in board file as the generic clock code now handles this. Note for space reason and as it is not required just for booting we do not enable I2C in U-Boot by default. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* colibri_vf: migrate pinctrl and regulators to dtb/dmMarcel Ziswiler2019-04-131-128/+11
| | | | | | | | | | | | Migrate pinctrl and regulators to device tree resp. driver model: DDR, DSPI, ENET, ESDHC, I2C, NFC and UART. Enable CMD_DM, PINCTRL and DM_REGULATOR. While at it also update copyright period and sort include files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* ARM: dts: colibri_vf: update device treesMarcel Ziswiler2019-04-131-1/+3
| | | | | | | | | | | | | | | | | Update device tree in preparation of further driver model migration: Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller, USBH_PEN GPIO regulator. Add iomux resp. pinctrl entries to be removed from proprietary platform data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO. Introduce a U-Boot specific device tree with some required u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl. pinctrl. While at it also update the MAINTAINERS file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* board: colibri_imx6: check for and report ecc errors in fusesGerard Salvatella2019-04-132-2/+108
| | | | | | | | | | The PMIC on the Colibri iMX6 may have ECC errors in fuses that will prevent correct settings. Up to one bit error per fuse bank can be reported and corrected by the ECC logic. Two bit errors can only be reported. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: added nreset gpio on rebootGerard Salvatella2019-04-131-0/+24
| | | | | | | | | | | RGMII_RD1 pin (active high, GPIO6_IO27) is triggered on reboot during the SPL phase. This asserts (active low) nReset_Out from the PMIC. Only V1.1 and later Colibri iMX6 modules implement this in hw. Previous versions do not use this pin, so it is safe to leave it enabled at all times. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: use SDP if USB serial downloader has been usedStefan Agner2019-04-131-1/+9
| | | | | | | | | | | In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* toradex: colibri_imx6: overwrite CMA memory set in device treeBhuvanchandra DV2019-04-131-1/+13
| | | | | | | | | | | Make sure CMA memory is not greater than 50% of available physical memory. Allow user to change the CMA memory via 'cma-size' U-Boot environment variable. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: revert fuse value set in mfgr_fuseMax Krummenacher2019-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | We have two commands to change the bootmode fuses: mfgr_fuse which set fuse 0/5 and 0/6 and updt_fuse which burns bit 4 of 0/5. Before Image 2.6 we fused in mfgr_fuse 0x5062, which boots from the user partition of the eMMC. To workaround certain hangs we moved to fastboot mode and using the first bootpartition of the eMMC requiring a fuse value of 0x5072 which could be achived by the then added updt_fuse command. At the same time the mfgr_fuse command was changed to also fuse 0x5072, revert that second change so that one can fuse both values, one with just mfgr_fuse and the later with mfgr_fuse;updt_fuse. Note that the mfgr_fuse command is only needed at module production time, a customer might need to use updt_fuse when upgrading an older module to be compatible with a newer image. The command is integrated into the image update scripts. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: change pmic fusing according to hw 1.1 requirementsMax Krummenacher2019-04-131-7/+9
| | | | | | | | | | Colibri iMX6 V1.1 HW can use the PMIC GEN3 to power the NVCC_SD1. Change the settings fused into the PMIC's OTP to powerup with GEN3 set to output 3.3V. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri imx6: disable ri and dcd irq in uartsMax Krummenacher2019-04-131-1/+8
| | | | | | | | | | | | If the UART is used in DTE mode the RI and DCD bits in UCR3 become irq enable bits. Both are set to enabled after reset and both likely are pending. Disable the bits also on UARTs not used in the boot loader to prevent an interrupt storm when Linux enables the UART interrupts. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri imx6: pf0100: reorder and cleanup message printingMax Krummenacher2019-04-131-41/+41
| | | | | | | | Keep debug code at the end of the function. Use a one line informational message for the PMIC only. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: unify sd/mmc drive strenght with linux kernel settingsMax Krummenacher2019-04-131-10/+14
| | | | | | | | In the linux device tree we use 40Ohm drive strenght. So use the same value in U-Boot. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: print also 64-bit ITMax Krummenacher2019-04-131-0/+1
| | | | | | | Print also for Colibri iMX6 512MB IT with 64-bit RAM bus. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: drop CONFIG_OF_SYSTEM_SETUPMax Krummenacher2019-04-131-7/+0
| | | | | | | This doesn't do anything anymore, probably never did. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: migrate usb to using driver modelMarcel Ziswiler2019-04-131-22/+1
| | | | | | Migrate USB to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: migrate mmc to using driver modelMarcel Ziswiler2019-04-131-34/+4
| | | | | | Migrate MMC to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: migrate i2c to using driver modelMarcel Ziswiler2019-04-132-73/+31
| | | | | | Migrate I2C to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: clean-up and migrate gpios to using driver modelMarcel Ziswiler2019-04-131-75/+134
| | | | | | | | | | | Migrate GPIOs to using driver model, properly request backlight, MMC/SD card detect and USB power enable GPIOs and also enable SION bit in pin muxing for auxiliary, backlight and USB power enable GPIOs. While at it also update copyright year, clean-up/re-order includes, add some comments clarifying ifdef scope and do some white-space clean-up. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: migrate to using device treeMarcel Ziswiler2019-04-131-0/+2
| | | | | | | Migrate to using device tree required for further driver model integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* colibri_imx6: get rid of obsolete nospl configurationsMarcel Ziswiler2019-04-136-292/+0
| | | | | | | Now with SPL long since being in place even for recovery using SDP finally get rid of those nospl configurations. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* board: apalis_imx6: check for and report ecc errors in fusesGerard Salvatella2019-04-132-1/+107
| | | | | | | | | The PMIC on Apalis iMX6 may have ECC errors in fuses that will prevent correct settings. Up to one bit error per fuse bank may be reported and corrected by the ECC logic. Two bit errors can only be reported. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
generated by cgit (git 2.34.1) at 2024-10-01 15:47:20 +0000