summaryrefslogtreecommitdiffstats
path: root/board/LaCie
Commit message (Collapse)AuthorAgeFilesLines
* arm: kirkwood: enable DM_ETH for LaCie boardSimon Guinot2020-07-092-3/+3
| | | | | | | | | | | | | | | This patch enables DM_ETH for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
* arm: kirkwood: add DT spi0 alias to LaCie boardsSimon Guinot2020-07-092-7/+20
| | | | | | | | | | | | | | | | | | | | | | The spi0 alias is needed by the environment code to retrieve the SPI flash. This patch adds some -u-boot.dtsi files, providing the spi0 aliases, for all the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Note that this -u-boot.dtsi files will be removed as soon as the spi0 aliases will be available in the upstream Linux dtsi files. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* command: Remove the cmd_tbl_t typedefSimon Glass2020-05-182-2/+3
| | | | | | | | | | | | | We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop init.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Move reset_phy() to net.hSimon Glass2020-01-173-0/+3
| | | | | | This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Drop environment.h header file where not neededSimon Glass2019-08-112-2/+0
| | | | | | | | This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Move env_set() to env.hSimon Glass2019-08-112-0/+2
| | | | | | | Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-0716-39/+16
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* net: Move enetaddr env access code to env config instead of net configAlex Kiernan2018-04-082-0/+2
| | | | | | | | | | | | | | | | | | | | In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
* env: Rename getenv/_f() to env_get()Simon Glass2017-08-162-2/+2
| | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()Simon Glass2017-08-162-2/+2
| | | | | | Rename this function for consistency with env_set(). Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Add explicit include of <asm/mach-types.h>Simon Glass2017-06-053-0/+3
| | | | | | | | Rather than relying on common.h to provide this include, which is going away at some point, include it explicitly in each file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Revert "arm: Remove d2net_v2 defconfig file"Tom Rini2015-10-191-5/+1
| | | | | | | | | | | | | Upon further review when populating README.scrapyard, d2net_v2 is a variant on net2big_v2 and not just an orphan config. To help in the future also add this to board/LaCie/net2big_v2/MAINTAINERS which needed a little consolidation anyhow. This reverts commit 1363740e7948a8e4bee8d5adcdf0f63f7782879d. Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove wireless_space boardSimon Glass2015-09-285-266/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* edminiv2: drop CONFIG_CFI_LEGACYAlbert ARIBAUD2015-02-251-50/+0
| | | | | | | | Nowadays generic CFI code properly detects the ED Mini V2's Macronix MC29LV400CB flash chip, therefore we can drop the CONFIG_FLASH_CFI_LEGACY option and associated settings and code. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* edminiv2: switch to SPLAlbert ARIBAUD2015-02-251-0/+20
| | | | | | | | | | | | | | | | ED Mini V2 is based on Orion 5x which boots at fixed address 0xFFFF0000 in NOR Flash. Place SPL there, and switch U-Boot from .bin to .img format, stored in NOR Flash at 0xFFF90000. Note: this patch was tested on HW and works, i.e. it boots U-Boot properly, but SPL console output currently does not appear, due to GD being trashed by arch/arm/lib/spl.c. This trashing is soon to be removed, and then ED Mini V2 SPL console output will become visible. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* edminiv2: switch to generic board supportAlbert ARIBAUD2015-02-251-12/+0
| | | | Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* wireless_space: set myself as maintainerAlbert ARIBAUD2014-10-271-1/+1
| | | | | | | LaCie Wireless Space has no defined maintainer. Set myself as maintainer, since I own one of these. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()Stefan Roese2014-10-233-3/+3
| | | | | | | | | | | | Additionally the SDRAM address decoding register address is not hard coded in the C code any more. A define is introduced for this base address. This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* arm: marvell: Extract kirkwood gpio functions into new common file gpio.cStefan Roese2014-10-233-6/+6
| | | | | | | | This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* arm: marvell: Move arch/kirkwood.h to arch/soc.hStefan Roese2014-10-233-3/+3
| | | | | | | | | This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* MAINTAINERS: comment out blank M: fieldMasahiro Yamada2014-09-243-3/+3
| | | | | | | | | | | | | | | | | | Since commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4 (patman: RunPipe() should not pipe stdout/stderr unless asked), Patman spits lots of "Invalid MAINTAINERS address: '-'" error messages for patches with global changes. It takes too long for Patman to process them. Anyway, "M: -" does not carry any important information. Rather, it is just like a place holder in case of assigning a new board maintainer. Let's comment out. This commit can be reproduced by the following command: find . -name MAINTAINERS | xargs sed -i -e '/^M:[[:blank:]]*-$/s/^/#/' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* kconfig: remove redundant "string" type in arch and board KconfigsMasahiro Yamada2014-09-134-12/+0
| | | | | | | | | | | | | | | | | | Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* orion5x: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-301-8/+0
| | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the Orion5x board select menu to orion5x/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="orion5x"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* kirkwood: kconfig: refactor Kconfig and defconfigMasahiro Yamada2014-08-303-24/+0
| | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the KirkWood board select menu to kirkwood/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="kirkwood"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Prafulla Wadasdkar <prafulla@marvell.com> Cc: Luka Perkov <luka@openwrt.org>
* Add board MAINTAINERS filesMasahiro Yamada2014-07-304-0/+37
| | | | | | | | | | | | | | | | | | | | We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* kconfig: add board Kconfig and defconfig filesMasahiro Yamada2014-07-304-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* Makefile: make directories by Makefile.buildMasahiro Yamada2013-11-174-16/+0
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* board: arm: convert makefiles to Kbuild styleMasahiro Yamada2013-11-014-86/+5
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-2420-223/+20
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* net2big_v2: initialize LEDs at startupSimon Guinot2013-06-202-7/+96
| | | | | | | | This patch allows to configure the net2big_v2 LEDs at startup (through the GPIO extension bus). The front blue LED is enabled and the SATA rear LEDs are configured to blink in relation with the SATA activity. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* LaCie/common: add support for the CPLD GPIO busSimon Guinot2013-06-202-0/+74
| | | | | | | | | | | | This patch adds support for the CPLD GPIO bus found on some LaCie boards (as the 2Big/5Big Network v2 and the 2Big NAS). This parallel GPIO bus exposes two registers (address and data). Each of this register is made up of several dedicated GPIOs. An extra GPIO is used to notify the CPLD that the registers have been updated. Mostly this bus is used to configure the LEDs on LaCie boards. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* net2big_v2: initialize I2C fan at startupSimon Guinot2013-06-202-1/+58
| | | | | | | | This patch ensures minimal cooling for the net2big_v2 by automatically starting the I2C fan (GMT G762) at low speed (2800 RPM). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* Fix references to the documentation filesAnatolij Gustschin2013-05-105-5/+5
| | | | | | | | | | | | Many boot image configuration files refer to the appropriate documentation file, but these references contain typos in the directory and file name. Fix them. Also fix reference to doc/README.SPL file. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* ARM: lacie_kw: add support for WIRELESS_SPACEAlbert ARIBAUD2013-01-093-0/+304
| | | | Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* kirkwood: make MPP arrays static constAlbert ARIBAUD2013-01-092-2/+2
| | | | | | | | | | This saves stack and code memory for local copy, and consumes initialized data memory. For 22 of the 29 kirkwood-based boards, this results in a global saving of about 30 bytes. For 7 of them, it results in an increase of 6 to 14 bytes. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* ARM: add support for Network Space v2 Lite and MiniSimon Guinot2012-10-034-3/+200
| | | | | | | | | | | | | | | | | | This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports (Lite only): host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* ARM: don't probe PHY address for LaCie boardsSimon Guinot2012-07-075-20/+11
| | | | | | | | | | | | | The command miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr) always returns 8 for the PHY address. It is the reset value for the PHY Address Register. Obviously, this default value could be incorrect. Moreover, as the PHY address is well known, there is no need to auto-detect it. Now, the PHY address must given as a parameter to the PHY initialization function. Additionally this patch also fixes some aesthetic issues. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* kirkwood: fix calls to kirkwood_mpp_confValentin Longchamp2012-07-072-2/+2
| | | | | | | | | With the new second save argument introduced by the previous patch, all the calls to the function had to be fixed. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com>
* board/LaCie/edminiv2/edminiv2.c: Fix build warningWolfgang Denk2011-12-101-0/+1
| | | | | | | | | | | Fix: edminiv2.c: In function 'reset_phy': edminiv2.c:98:2: warning: implicit declaration of function 'mv_phy_88e1116_init' [-Wimplicit-function-declaration] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Guinot <simon.guinot@sequanux.org>
* ARM: remove duplicated code for LaCie boardsSimon Guinot2011-12-0611-236/+143
| | | | | | | | | | This patch groups together all the common functions for LaCie boards: Ethernet PHY and MAC address initializations. Moreover the configurations for LaCie Kirkwood boards are merged into a single file: include/configs/lacie_kw.h Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* ARM: add support for LaCie 2Big Network v2Simon Guinot2011-12-064-0/+442
| | | | | | | | | | This patch adds support for the LaCie 2Big Network v2 board, based on the Marvell Kirkwood 6281 SoC. Additional information is available at: http://lacie-nas.org/doku.php?id=2big_network_v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* netspace_v2: Read Ethernet MAC address from EEPROMSimon Guinot2011-12-061-0/+43
| | | | Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* netspace_v2: fix SDRAM configurationSimon Guinot2011-11-032-2/+164
| | | | | | | | | | | | Network Space (Max) v2 and Internet Space v2 boards have different SDRAM configuration and size: respectively 256MB (DDR2 1Gb, 128Mbx8 organisation) and 128MB (DDR2 512Mb, 64Mbx8 organisation). To handle the differences, this patch add a dedicated kwimage.cfg file for Internet Space v2. Additionnaly the number of SDRAM banks is fixed. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* ARM: netspace_v2: fix warningsAnatolij Gustschin2011-11-031-0/+1
| | | | | | | | | | | | | | | Fix compiler warnings when compiling for netspace_v2, netspace_max_v2 and inetspace_v2: netspace_v2.c: In function 'board_early_init_f': netspace_v2.c:37: warning: implicit declaration of function 'kw_config_gpio' netspace_v2.c: In function 'board_init': netspace_v2.c:86: warning: implicit declaration of function 'kw_sdram_bar' Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Marek Vasut <marek.vasut@gmail.com>
* punt unused clean/distclean targetsMike Frysinger2011-10-152-12/+0
| | | | | | | | | | The top level Makefile does not do any recursion into subdirs when cleaning, so these clean/distclean targets in random arch/board dirs never get used. Punt them all. MAKEALL didn't report any errors related to this that I could see. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Add support for Network Space v2 and parentsSimon Guinot2011-07-044-0/+395
| | | | | | | | | | | This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2. Additional information is available at: http://lacie-nas.org/doku.php?id=network_space_v2 Signed-off-by: Simon Guinot <sguinot@lacie.com>
* Replace obsolete e-mail addressAlbert ARIBAUD2011-04-273-3/+3
| | | | Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* Merge branch 'elf_reloc'Wolfgang Denk2010-10-191-1/+2
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit (git 2.34.1) at 2024-11-14 05:19:31 +0000