summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* ppc: qemu: Move board directory from board/freescale to board/emulationBin Meng2021-03-051-1/+1
| | | | | | | | | | board/emulation is the place for other QEMU targets like x86, arm, riscv. Let's move the qemu-ppce500 board codes there. List me as a co-maintainer for this board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* gpio: mpc8xxx: Support controller register physical address beyond 32-bitBin Meng2021-03-051-1/+1
| | | | | | | | | dev_read_addr_size_index() returns fdt_addr_t which might be a 64-bit physical address. This might be true for some 85xx SoCs whose CCSBAR is mapped beyond 4 GiB. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* ppc: mpc85xx: Add 'gpibe' register to 'struct ccsr_gpio'Bin Meng2021-03-051-0/+1
| | | | | | | | Without this, the DM GPIO driver for MPC8xxx does not compile for MPC85xx SoCs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* ppc: io.h: Use addrmap_ translation APIs only in post-relocation phaseBin Meng2021-03-051-6/+9
| | | | | | | | | | | | In phys_to_virt() and virt_to_phys(), if CONFIG_ADDR_MAP is defined, they use addrmap_ translation APIs to do the address translation. However these APIs only work in post-relocation phase. Update the code logic to fall back to use the default one when in pre-relocation phase. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAWBin Meng2021-03-052-0/+4
| | | | | | | LAW related codes should be wrapped with CONFIG_FSL_LAW. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* configs: fsl: move via specific defines to KconfigRajesh Bhagat2021-03-051-0/+6
| | | | | | | | | | Moves below via specific defines to Kconfig: CONFIG_FSL_VIA Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* ppc: Remove MPC8569MDS boardTom Rini2021-02-257-141/+3
| | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is the last ARCH_MPC8569 board, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc8379erdb: Add device treeSinan Akman2021-02-212-0/+75
| | | | Signed-off-by: Sinan Akman <sinan@writeme.com>
* dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIOIgor Opaniuk2021-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini2021-02-1537-1/+37
|\ | | | | | | - Merge the patch to take <asm/global_data.h> out of <common.h>
| * common: Drop asm/global_data.h from common headerSimon Glass2021-02-0237-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | ppc: Remove MPC8641HPCN boardTom Rini2021-02-151-7/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | ppc: Remove MPC8610HPCD boardTom Rini2021-02-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | ppc: Remove MPC8572DS boardTom Rini2021-02-151-9/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | ppc: Remove MPC8544DS boardTom Rini2021-02-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | gpio: mpc8xxx_gpio: Fix for litte endianBiwen Li2021-02-081-0/+13
| | | | | | | | | | | | | | Update gpio driver to use same logic for big-endian and little-endian Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | mpc8xxx: fsl_pamu: Update data type in config_pamuPriyanka Jain2021-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Update data type of '1' to '1ull' in below assignment size = 1ull << sizebit; to fix incorrect assignment issue. e.g: when sizebit was 31, 0x80000000 got sign extended to 0xffffffff_80000000 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reported-by: Dean Saridakis <dean.saridakis@baesystems.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | PowerPC: keymile: Add support for kmcent2 boardNiel Fourie2021-02-083-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic support for the Hitachi Power Grids kmcent2 board, based on the NXP QorIQ T1040 SoC. Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Fixed blank line at EOF errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* | PowerPC: dts: Pulled in kmcent2 dts files from Linux 5.10Niel Fourie2021-02-0817-0/+1580
| | | | | | | | | | | | | | | | | | | | | | | | Pulled in the kmcent2.dts and all its dependents from Linux 5.10, commit 2c85ebc57b3e upstream. Replaced the license text with SPDX License Identifiers. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | bdinfo: Rename function names to be clearerBin Meng2021-02-031-2/+2
|/ | | | | | | | | | | | | | | | At present we have bdinfo_print_num() to print unsigned long numbers. We also have print_phys_addr() which accept numbers that might be 64-bit on a 32-bit platform. Rename these 2 functions to be clearer: bdinfo_print_num() => bdinfo_print_num_l() print_phys_addr() => bdinfo_print_num_ll() While we are here, make bdinfo_print_num_ll() public so that it can be used outside cmd/bdinfo.c in the future. Signed-off-by: Bin Meng <bin.meng@windriver.com>
* common: board_r: Drop arch-specific ifdefs around initr_trapOvidiu Panait2021-01-152-0/+20
| | | | | | | | | | | | In order to remove the arch-specific ifdefs around initr_trap, introduce arch_initr_trap weak initcall. Implementations for ppc/m68k/mips have been moved to arch/<arch>/lib/traps.c Default implementation is a nop stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* common: board_r: Drop initr_secondary_cpu wrapperOvidiu Panait2021-01-151-1/+3
| | | | | | | | Add a return value to cpu_secondary_init_r and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* powerpc: mpc85xx: Allow boards to override CONFIG_USB_MAX_CONTROLLER_COUNTChris Packham2020-12-101-0/+2
| | | | | | | | | If the board isn't strapped to enable USB1 then attempting to access it will result in a hang. Avoid this by allowing boards to define CONFIG_USB_MAX_CONTROLLER_COUNT. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: Rename uclass to sysinfoSimon Glass2020-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* km: fix license string and compatible stringsHolger Brunck2020-10-2216-25/+25
| | | | | | | | | | | | | | | As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board/freescale: Remove P5020DS board supportPriyanka Jain2020-09-241-8/+0
| | | | | | | Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/freescale: Remove P1024RDB board supportPriyanka Jain2020-09-241-9/+0
| | | | | | | Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/freescale: Remove P1021RDB board supportPriyanka Jain2020-09-241-9/+0
| | | | | | | Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/freescale: Remove P1020MBG board supportPriyanka Jain2020-09-241-9/+0
| | | | | | | Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/freescale: Remove P1020UTM board supportPriyanka Jain2020-09-241-9/+0
| | | | | | | Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/freescale: Remove P1025RDB board supportPriyanka Jain2020-09-241-9/+0
| | | | | | | Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/freescale: Remove p1023rdb board supportPriyanka Jain2020-09-241-8/+0
| | | | | | | Remove NXP powerpc p1023rdb board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: powerpc: p2020rdb: Add eTSEC DT nodesHou Zhiqiang2020-09-248-2/+170
| | | | | | | | | | | | P2020RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII switch VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: powerpc: p1010rdb: Add eTSEC DT nodesHou Zhiqiang2020-09-242-0/+75
| | | | | | | | | | | | P1010RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII PHY AR8033 eTSEC2: Connected to SGMII PHY AR8033 eTSEC3: Connected to SGMII PHY AR8033 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: powerpc: p1020rdb: Add eTSEC DT nodesHou Zhiqiang2020-09-2411-2/+273
| | | | | | | | | | | | | P1020RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII switch VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc8xxx: Don't compile board_eth_init() for DM_ETHHou Zhiqiang2020-09-241-0/+2
| | | | | | | | | The cpu_eth_init() is only used by the legacy ethernet driver framework. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P1010RDB: Add eSPI slave DT nodesHou Zhiqiang2020-09-243-0/+19
| | | | | | | Add DT nodes for eSPI slave device SPI flash. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P1010: Add eSPI controller DT nodeHou Zhiqiang2020-09-241-0/+10
| | | | | | | Add eSPI controller DT node for P1010. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T4240RDB: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+15
| | | | | | | | Add ESPI slave node for T4240RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T4240: Add ESPI DT nodesXiaowei Bao2020-09-241-0/+9
| | | | | | | | Add ESPI controller DT node for T4240. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T2080RDB: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+15
| | | | | | | | Add ESPI slave node for T2080RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T1042D4RDB: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+15
| | | | | | | | Add ESPI slave node for T1042D4RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T104x: Add ESPI DT nodesXiaowei Bao2020-09-241-0/+9
| | | | | | | | Add ESPI controller DT node for T104x. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T1024RDB: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+12
| | | | | | | | | Add ESPI slave node for T1024RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: T102x: Add ESPI DT nodesXiaowei Bao2020-09-241-0/+9
| | | | | | | | Add ESPI controller DT node for T102x. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P5040DS: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+13
| | | | | | | | | Add ESPI slave node for P5040DS. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P5040: Add ESPI DT nodesXiaowei Bao2020-09-241-0/+9
| | | | | | | | Add ESPI controller DT node for P5040. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P4080DS: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+13
| | | | | | | | | Add ESPI slave node for P4080DS. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P4080: Add ESPI DT nodesXiaowei Bao2020-09-241-0/+9
| | | | | | | | Add ESPI controller DT node for P4080. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dts: P3041DS: Add ESPI slave device nodeXiaowei Bao2020-09-241-0/+13
| | | | | | | | | Add ESPI slave node for P3041DS. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2024-11-16 05:21:32 +0000