summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* rockchip: Use pwrseq for MMC start-up on jerrySimon Glass2016-01-211-4/+11
| | | | | | | This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Convert the PMU IOMUX registers into an arraySimon Glass2016-01-211-4/+8
| | | | | | | | | This is easier to deal with when using generic code since it allows us to use a register index instead of naming each register. Adjust it, adding an enum to improve readability. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Avoid using MMC code when not booting from MMCSimon Glass2016-01-211-0/+2
| | | | | | This saves some code space in SPL which is useful on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: bootm: Try to use relocated ramdiskJeffy Chen2016-01-211-1/+11
| | | | | | | | | After boot_ramdisk_high(), ramdisk would be relocated to initrd_start & initrd_end, so use them instead of rd_start & rd_end. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-2112-7/+50
|\
| * arm: ls1021atwr: Enable driver model lpuart serial driverBin Meng2016-01-202-1/+17
| | | | | | | | | | | | | | | | | | | | | | Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alison Wang <alison.wang@nxp.com> Tested-by: Alison Wang <alison.wang@nxp.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Split off board device treeBin Meng2016-01-203-3/+18
| | | | | | | | | | | | | | Move /chosen node out of the board device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Convert to driver model and enable serial supportBin Meng2016-01-202-4/+4
| | | | | | | | | | | | | | | | Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: dts: dra7-evm: add tick-timer to chosen nodeMugunthan V N2016-01-201-0/+1
| | | | | | | | | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: dts: dra72-evm: add tick-timer to chosen nodeMugunthan V N2016-01-201-0/+1
| | | | | | | | | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: dts: am335x-evm: add tick-timer to chosen nodeMugunthan V N2016-01-201-0/+1
| | | | | | | | | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: dts: am335x-boneblack: add tick-timer to chosen nodeMugunthan V N2016-01-201-0/+1
| | | | | | | | | | | | | | Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: dts: am437x-gp-evm: add tick-timer to chosen nodeMugunthan V N2016-01-201-0/+1
| | | | | | | | | | | | | | Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: dts: am437x-sk-evm: add tick-timer to chosen nodeMugunthan V N2016-01-201-0/+1
| | | | | | | | | | | | | | Specify which timer to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: omap-common: do not build timer when CONFIG_TIMER definedMugunthan V N2016-01-201-0/+6
| | | | | | | | | | | | | | | | | | | | To prepare timer driver to DM/DT conversion do not build the exiting timer driver when CONFIG_TIMER is defined. But since omap's SPL doesn't support DM yet so built timer driver only for SPL build when CONFIG_TIMER is defined. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-216-0/+30
|/ | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* stm32: move stm32 specific code to mach-stm32Vikas Manocha2016-01-2017-6/+37
| | | | | | | This patch moves stm32 sources at one place, with this armv7m now contains only generic stuff. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
* armv7: Add missing newline after OMAP die IDLadislav Michl2016-01-201-2/+2
| | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
* arm, ubifs: fix gcc5.x compiler warningHeiko Schocher2016-01-202-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | compiling U-Boot for openrd_base_defconfig with gcc 5.x shows the following warning: CC fs/ubifs/super.o In file included from fs/ubifs/ubifs.h:35:0, from fs/ubifs/super.c:37: fs/ubifs/super.c: In function 'atomic_inc': ./arch/arm/include/asm/atomic.h:55:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ fs/ubifs/super.c: In function 'atomic_dec': ./arch/arm/include/asm/atomic.h:64:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/sb.o [...] CC fs/ubifs/lpt.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/lpt.c:35: fs/ubifs/lpt.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/lpt_commit.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/lpt_commit.c:26: fs/ubifs/lpt_commit.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/scan.o CC fs/ubifs/lprops.o CC fs/ubifs/tnc.o In file included from include/linux/bitops.h:123:0, from include/common.h:20, from include/ubi_uboot.h:17, from fs/ubifs/ubifs.h:37, from fs/ubifs/tnc.c:30: fs/ubifs/tnc.c: In function 'test_and_set_bit': ./arch/arm/include/asm/bitops.h:57:2: warning: 'flags' is used uninitialized in this function [-Wuninitialized] local_irq_save(flags); ^ CC fs/ubifs/tnc_misc.o Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: uniphier: remove unneeded if conditionalsMasahiro Yamada2016-01-201-8/+2
| | | | | | | The if block does the same as the else block does. The conditional is not necessary at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: move UMC register macros to umc-regs.hMasahiro Yamada2016-01-202-48/+27
| | | | | | The umc-proxstream2.c defiens the same macros as in umc-regs.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: set active ways to really enable outer cacheMasahiro Yamada2016-01-201-0/+2
| | | | | | Each way must be unlocked to make it effective. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: fix range invalidate for outer cacheMasahiro Yamada2016-01-201-0/+23
| | | | | | | If invalidate operation is invoked against a cache-unaliged region, the both ends of the region should be flushed, not invalidated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: factor out outer cache sync as a helper functionMasahiro Yamada2016-01-201-4/+8
| | | | | | Avoid repeating the same code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: refactor outer cache operation slightlyMasahiro Yamada2016-01-201-2/+4
| | | | | | Improve readability without changing the behavior. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov2016-01-192-2/+7
| | | | | | | | | This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
* armv8: cavium: Add the device tree for ThunderXSergey Temerkhanov2016-01-193-0/+395
| | | | | | | | | This commit adds the FDT for the ThunderX family of SoCs Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructureSergey Temerkhanov2016-01-193-0/+97
| | | | | | | | | | | | | | | | | This commit adds functions issuing calls to secure monitor or hypervisore. This allows using services such as Power State Coordination Interface (PSCI) provided by firmware, e.g. ARM Trusted Firmware (ATF) The SMC call can destroy all registers declared temporary by the calling conventions. The clobber list is "x0..x17" because of this Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
* armv8: New MMU setup code allowing to use 48+ bits PA/VASergey Temerkhanov2016-01-195-6/+199
| | | | | | | | | | | | | This patch adds code which sets up 2-level page tables on ARM64 thus extending available VA space. CPUs implementing 64k translation granule are able to use direct PA-VA mapping of the whole 48 bit address space. It also adds the ability to reset the SCTRL register at the very beginning of execution to avoid interference from stale mappings set up by early firmware/loaders/etc. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* armv8: Add read_mpidr() functionSergey Temerkhanov2016-01-191-0/+11
| | | | | | | | | | This patch adds the read_mpidr() function which returns the MPIDR_EL1 register value Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-1935-385/+35
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* socfpga: Modify qts-filter args to allow input for bsp generated files and ↵Dalon Westergreen2016-01-161-31/+45
| | | | | | | | | | | | quartus project directories The hps_isw_handoff and bsp/generated folders are typically not in the same path.This patch adds support for specifying the different input directories for the bsp and quartus projects. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
* arm: initialize gd for AArch64Stephen Warren2016-01-141-0/+2
| | | | | | | | | | | Commit adc421e4cee8 "arm: move gd handling outside of C code" removed the call to arch_setup_gd() on ARM and replaced it with assembly code in crt0.S. However, AArch64 uses a different startup file, and the same change was not made to it. This leaves gd uninitialized on AArch64, which typically leads to hangs or crashes. This change fixes that. Fixes: adc421e4cee8 ("arm: move gd handling outside of C code") Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-01-1427-373/+1554
|\ | | | | | | | | | | | | Conflicts: arch/arm/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * mvebu: Support Synology DS414Phil Sutter2016-01-144-2/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mvebu: Add rudimental MV78230 supportPhil Sutter2016-01-143-6/+17
| | | | | | | | | | | | | | | | | | This adds basic support for Marvell's MV78230 SoC which belongs to the Armada XP series. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mvebu: Introduce kconfig symbols for SoC variantsPhil Sutter2016-01-141-4/+20
| | | | | | | | | | | | | | | | | | This patch adds intermediate kconfig symbols which select their SoC family. Boards then select them instead of the family symbol directly. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mvebu: axp: refactor board_sat_r_get() and callerPhil Sutter2016-01-141-31/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Instead of calling board_sat_r_get() only for those boards providing the satr11 value via I2C, call it for all boards and return static values for those not using I2C. In addition to that, make this a weak function to allow for board code to override it. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * drivers/pci/pci_mvebu: Fix for boards with X4 lanesPhil Sutter2016-01-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Armada XP has support for X4 lanes, boards specify this in their serdes_cfg. During PEX init in high_speed_env_lib.c, the configuration is stored in GEN_PURP_RES_2_REG. When enumerating PEX, subsequent interfaces of an X4 lane must be skipped. Otherwise the enumeration hangs up the board. The way this is implemented here is not exactly beautiful, but it mimics how Marvell's BSP does it. Alternatively we could get the information using board_serdes_cfg_get(), but that won't lead to clean code, either. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: mvebu: Add runtime detection of UART (xmodem) boot-modeStefan Roese2016-01-144-20/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds runtime detection of the Marvell UART boot-mode (xmodem protocol). If this boot-mode is detected, SPL will return to the BootROM to continue the UART booting. With this patch its now possible, to generate a U-Boot image that can be booted either from the strapped boot-device (e.g. SPI NOR, MMC, etc) or via the xmodem protocol from the UART. In the UART case, the kwboot tool will dynamically insert the UART boot-device type into the image. And also patch the load address in the header, so that the mkimage header will be skipped (as its not expected by the Marvell BootROM). This simplifies the development for Armada XP / 38x based boards. As no special images need to be generated by selecting the MVEBU_BOOTROM_UARTBOOT Kconfig option. Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any more, its now completely removed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
| * arm: mvebu: Add runtime boot-device detectionStefan Roese2016-01-142-7/+39
| | | | | | | | | | | | | | | | | | | | This patch adds runtime boot-device detection to SPL U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
| * arm: mvebu: Make local structs static constStefan Roese2016-01-141-2/+2
| | | | | | | | | | | | | | | | | | | | As these structs are local only and const, declare them accordingly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
| * arm: mvebu: Move SAR register defines into headerStefan Roese2016-01-142-16/+24
| | | | | | | | | | | | | | | | | | | | This is preparation for the runtime bootmode detection in spl.c. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
| * arm: mvebu: Remove leftover MakefileStefan Roese2016-01-141-14/+0
| | | | | | | | | | | | | | | | | | This Makefile was not used since quite some time. I only missed to remove it in the move to mach-mvebu. So lets remove it now so that the mvebu-common directory is really removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Move SoC selection (A38X vs AXP) into KconfigStefan Roese2016-01-147-15/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, the SoC selection for the ARCH_MVEBU platforms has been done in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As it needed to get selected for AXP and A38x based boards. This patch now changes this to move the SoC selection to Kconfig. And also uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x. This makes things a bit clearer - especially for new board additions. Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available CONFIG_ARMADA_38X and CONFIG_ARMADA_XP. And CONFIG_DDR3 is removed, as its not referenced anywhere. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Consolidate board Kconfig options into one fileStefan Roese2016-01-142-4/+17
| | | | | | | | | | | | | | | | Merging all the board specific Kconfig options into the main Kconfig file for mach-mvebu makes things easier to maintain. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Print CPU and SDRAM frequency upon startupStefan Roese2016-01-143-8/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, the CPU and the DDR frequencies will get printed in the U-Boot startup messages. Resulting in such a log: U-Boot 2016.01-rc2-00188-gb8eeaec-dirty (Dec 21 2015 - 12:32:35 +0100) SoC: MV78460-B0 at 1600 MHz I2C: ready DRAM: 4 GiB (800 MHz, ECC not enabled) ... Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Make serdes setup on Armada XP less noisyStefan Roese2016-01-141-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change some of the PEX configuration output lines from always output to only ouput upon specific debug enabling. This changes the SPL output from: U-Boot SPL 2016.01-rc2-00037-g9353a7f (Dec 10 2015 - 10:27:42) High speed PHY - Version: 2.1.5 (COM-PHY-V20) Update Device ID PEX0782611ab Update Device ID PEX1782611ab Update Device ID PEX2782611ab Update Device ID PEX3782611ab Update Device ID PEX8782611ab Update PEX Device ID 0x78260 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully to: U-Boot SPL 2016.01-rc2-00037-g9353a7f-dirty (Dec 10 2015 - 10:32:04) High speed PHY - Version: 2.1.5 (COM-PHY-V20) High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully Resulting in a little faster bootup time. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Don't include "netdev.h" in cpu.cStefan Roese2016-01-141-1/+0
| | | | | | | | | | | | | | | | | | This is not needed any more since the switch to DM / DTS network initialization on MVEBU. Lets remove it, as it otherwise leads to compilation warning when CONFIG_NET is not enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Add support for MV78260Stefan Roese2016-01-143-5/+29
| | | | | | | | | | | | | | | | | | | | This patch adds support for the dual core Armada XP variant, the MV78260. It has some minor differences to the 4-core MV78460, e.g. only 12 serdes lanes. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
generated by cgit (git 2.34.1) at 2024-11-19 04:04:09 +0000