summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
| * phy: meson-g12a-usb3-pcie: add support for PCIe opsNeil Armstrong2021-04-201-4/+77
| | | | | | | | | | | | Add the PCIe part of the G12A USB3 PCIe Combo PHY driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * clk: meson-g12a: add PCIe gatesNeil Armstrong2021-04-201-0/+2
| | | | | | | | | | | | Add missing gates used for PCIe. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * arm64: dts: meson: odroidc2: readd PHY reset propertiesStefan Agner2021-04-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | The sync of the device tree and dt-bindings from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") causes Ethernet to break on some ODROID-C2. The PHY seems to need proper reset timing to be functional in U-Boot and Linux afterwards. Readd the old PHY reset bindings for dwmac until we support the new bindings in the PHY node. Fixes: dd5f2351e99a ("arm64: dts: meson: sync dt and bindings from v5.6-rc2") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | Merge tag 'u-boot-amlogic-20210419' of ↵Tom Rini2021-04-198-4/+108
|\ \ | |/ |/| | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-amlogic - fix Ethernet on Odroid-C2 by re-adding old bindings style PHY reset - add G12A PCIe clock gates - add G12A PCIe PHY OPs - enable PCIe for Khadas VIM3/VIM3L boards DT - enable PCIe and NVME for Khadas VIM3/VIM3L boards config - update Amlogic board documentation for PCIe support
| * boards: amlogic: update documentation for PCIe supportNeil Armstrong2021-04-191-0/+2
| | | | | | | | Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * configs: meson64: add NVME boot targetNeil Armstrong2021-04-191-0/+7
| | | | | | | | | | | | Let's add a boot target for NVMe so we can do a full boot over NVMe. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * configs: khadas-vim3: enable PCIe and NVMeNeil Armstrong2021-04-192-0/+10
| | | | | | | | | | | | | | Now we have PCIe, let's also enable NVMe to access an eventual NVMe SSDs connected on the M.2 slot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * arm: dts: meson-khadas-vim3: enable PCIe in U-bootNeil Armstrong2021-04-191-0/+4
| | | | | | | | | | | | | | Enable PCIe by default in u-boot, this should eventually be made dynamic in the runtime board config depending on the MCU configuration. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * phy: meson-g12a-usb3-pcie: add support for PCIe opsNeil Armstrong2021-04-191-4/+77
| | | | | | | | | | | | Add the PCIe part of the G12A USB3 PCIe Combo PHY driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * clk: meson-g12a: add PCIe gatesNeil Armstrong2021-04-191-0/+2
| | | | | | | | | | | | Add missing gates used for PCIe. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * arm64: dts: meson: odroidc2: readd PHY reset propertiesStefan Agner2021-04-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | The sync of the device tree and dt-bindings from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") causes Ethernet to break on some ODROID-C2. The PHY seems to need proper reset timing to be functional in U-Boot and Linux afterwards. Readd the old PHY reset bindings for dwmac until we support the new bindings in the PHY node. Fixes: dd5f2351e99a ("arm64: dts: meson: sync dt and bindings from v5.6-rc2") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | Merge tag 'u-boot-atmel-2021.07-b' of ↵Tom Rini2021-04-193-1/+24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features for 2021.07 cycle: This small feature set include support for 5th PIO bank on pio4 pinctrl driver and a fix for the SPL on sama5d3.
| * | ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timerManuel Reis2021-04-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in the early SPL boot stage whenever there is a call to udelay, dm_timer_init fails to find the pit timer whenever it traverses the device tree, if this property is not present Signed-off-by: Manuel Reis <mluis.reis@gmail.com> CC: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
| * | ARM: dts: at91: sama7g5: change pinctrl compatible to sama7g5Eugen Hristev2021-04-191-1/+1
| | | | | | | | | | | | | | | | | | Change the pinctrl compatible to sama7g5, the right one for this product. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
| * | gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banksEugen Hristev2021-04-191-0/+22
| |/ | | | | | | | | | | | | | | Add support for sama7g5 pinctrl variant, with 5 banks with a degraded 8 line only 5th bank. Based on Linux Kernel implementation. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* / Revert "spl: Drop bd_info in the data section"Alexandru Gagniuc2021-04-194-34/+10
|/ | | | | | | | | | | | | | | | | | | | | This reverts commit 38d6b7ebdaee3e0e8426ef1b9df88bdce8ae2e75. struct global_data contains a pointer to the bd_info structure. This pointer was populated spl_set_bd() to a pre-allocated bd_info in the ".data" section. The referenced commit replaced this mechanism to one that uses malloc(). That new mechanism is only used if SPL_ALLOC_BD=y. which very few boards do. The result is that (struct global_data)->bd is NULL in SPL on most platforms. This breaks falcon mode, since arch_fixup_fdt() tries to access (struct global_data)->bd and set the "/memory" node in the devicetree. The result is that the "/memory" node contains garbage values, causing linux to panic() as it sets up the page table. Instead of trying to fix the mess, potentially causing other issues, revert to the code that worked, while this change is reworked. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* Merge tag 'efi-2021-07-rc1-2' of ↵Tom Rini2021-04-187-20/+24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-07-rc1-2 Documentation: man-page for fatinfo Bug fixes: memory leak in efi_capsule_scan_dir() incorrect invocations of EFI_CALL macro creating ESRT table buffer overflow in tcg2_create_digest()
| * efi_loader: fix possible buffer overflowMasahisa Kojima2021-04-171-1/+1
| | | | | | | | | | | | | | | | | | Variable "final" will have SHA512 digest, but currently the array size is not sufficient. Let's fix it. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
| * efi_loader: memory leak in efi_capsule_scan_dir()Heinrich Schuchardt2021-04-171-0/+3
| | | | | | | | | | | | | | If realloc() fails, we should free the old buffer. Fixes: c74cd8bd08d1: ("efi_loader: capsule: add capsule_on_disk support") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
| * efi_loader: esrt: Remove incorrect invocations of EFI_CALL macroSughosh Ganu2021-04-171-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove function invocations using the EFI_CALL macro for those functions that do not have an EFI_ENTRY call in their definition. Such functions can use u-boot api's which rely on u-boot global data(gd) pointer. The Arm and RiscV architectures maintain a separate gd pointer, one for u-boot, and a separate gd for the efi application. Calling a function through the EFI_CALL macro changes the gd pointer to that used for the efi application, with u-boot gd being unavailable. Any function then trying to dereference u-boot's gd will result in an abort. Fix this issue by removing the EFI_CALL macro for all of such functions which do not begin by an EFI_ENTRY function call. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
| * doc: duplicate target 'youtube'Heinrich Schuchardt2021-04-171-3/+3
| | | | | | | | | | | | | | | | | | | | Two external references cannot have the same name: doc/chromium/overview.rst:5: WARNING: Duplicate explicit target name: "youtube" Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
| * doc: fatinfo man-pageHeinrich Schuchardt2021-04-171-0/+1
| | | | | | | | | | | | Provide a man-page for the fatinfo command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
| * doc: imx: psb: fix footnotesHeinrich Schuchardt2021-04-171-1/+1
| | | | | | | | | | | | | | | | | | In reStructured text footnotes are referenced like [1]_. Add missing underscores. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Marek Vasut <marex@denx.de>
| * board: toradex: apalis-imx8x: fix build warningHeinrich Schuchardt2021-04-171-1/+1
| | | | | | | | | | | | | | The length of an underline must match the length of the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* | Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini2021-04-1812-183/+465
|\ \ | | | | | | | | | | | | | | | | | | | | | This is a patchset which makes away with the .bind() controller indexing workaround which was broken since before v2021.04, and then adds PHY support and MX8M support on top of that. Better add it into the release early to get as much testing as possible done, because this really does a lot of changes to the ehci-mx6 driver.
| * | ARM: imx8m: verdin-imx8mm: Enable USB Host supportMarek Vasut2021-04-182-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable USB host support on MX8MM Verdin. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
| * | usb: ehci-mx6: Add iMX8M supportMarek Vasut2021-04-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iMX8M uses nop PHY, select PHY and NOP_PHY automatically. Otherwise, the DM capable driver is now perfectly compatible. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Fix aarch64 build warningsMarek Vasut2021-04-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix cast from pointer to integer of different size by casting the pointer to uintptr_t instead of uint32_t, the former has correct size on both 32bit and 64bit architectures. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Add fsl,imx7d-usb compatible stringMarek Vasut2021-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new compatible string, used by some more up-to-date DTs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Set default CONFIG_MXC_USB_PORTSC if not definedMarek Vasut2021-04-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is now multiple copies of CONFIG_MXC_USB_PORTSC in configs set to PORT_PTS_UTMI | PORT_PTS_PTW, which is in fact the default register value for MX6, MX7 and MX7ULP. Define the default value of CONFIG_MXC_USB_PORTSC in the driver and use it in case CONFIG_MXC_USB_PORTSC is not defined in config, to reduce the duplication. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Add generic EHCI PHY supportMarek Vasut2021-04-181-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case PHY support is enabled, use the generic EHCI PHY support to start and stop the PHY. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Use portnr from DT in DM caseMarek Vasut2021-04-181-45/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the platform uses DM, determine port number, which is used as offset in USBMISC registers, from PHY node DT aliases, just like Linux does. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Pass MISC address to usb_oc_config()Marek Vasut2021-04-181-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of passing ad-hoc sequence number to usb_oc_config(), pass in the USB MISC address itself. The USB MISC address comes from DT in DM case, and from the old method using controller index in non-DM case. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Split usb_power_config()Marek Vasut2021-04-181-51/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split usb_power_config() per SoC and pass in USB PHY, USBNC and ANATOP addresses instead of ad-hoc sequence numbers. This is only applicable on legacy systems which do not implement proper PHY support. Once PHY support is available, parts of this can be removed altogether and moved to the PHY driver, similar to Linux phy-mxs-usb.c . Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Pass PHY address to usb_*_phy*()Marek Vasut2021-04-181-19/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of passing ad-hoc index to USB PHY handling functions and then try and figure out the PHY address, pass in the PHY address itself. For DM case, this address comes easily from DT. For non-DM case, the previous method is still present, however the non-DM case will soon be removed. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Split ehci_mx6_common_init()Marek Vasut2021-04-181-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to pass component addresses around easily instead of passing ad-hoc sequence numbers, it is necessary to split ehci_mx6_common_init(). Make it so and call the separate functions instead. Since board_ehci_hcd_init() makes no sense in DM case, do not call it in DM case. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Parse USB PHY and MISC offsets from DTMarek Vasut2021-04-181-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case DM and OF controler is enabled, but PHY support is disabled, parse USB PHY and MISC component addresses from DT manually. Those component addresses will be used in subsequent patches to access the ANATOP, PHY and MISC registers matching the controller and thus get rid of the ad-hoc controller sequence number mapping. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Unify USBNC registersMarek Vasut2021-04-181-34/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge USBNC register layout structure into a single one, instead of having three separate structures and a lot of ifdeffery. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Add DM clock supportMarek Vasut2021-04-181-5/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for using DM clock framework to enable and disable all the necessary clock for the USB controller. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | usb: ehci-mx6: Turn off Vbus on probe failureMarek Vasut2021-04-181-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver turns on Vbus regulator in probe, but fails to turn it back off in case of probe failure. Add the missing code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | imx: power-domain: Add fsl,imx8mn-gpc compatible stringMarek Vasut2021-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is compatible with iMX8MN, add missing compatible string. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | imx: power-domain: Add fsl,imx8mm-gpc compatible stringMarek Vasut2021-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is compatible with iMX8MM, add missing compatible string. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | ARM: dts: imx8mn: Add power domain nodesMarek Vasut2021-04-182-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add power domain nodes to DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | ARM: dts: imx8mm: Add power domain nodesMarek Vasut2021-04-182-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add power domain nodes to DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | ARM: dts: imx8mn: Replace deprecated fsl,usbphy DT props with physMarek Vasut2021-04-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fsl,usbphy DT property is deprecated, replace it with phys DT property and specify #phy-cells, so that the generic PHY framework can parse the PHY bindings without any extra hacking. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | ARM: dts: imx8mm: Replace deprecated fsl,usbphy DT props with physMarek Vasut2021-04-181-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fsl,usbphy DT property is deprecated, replace it with phys DT property and specify #phy-cells, so that the generic PHY framework can parse the PHY bindings without any extra hacking. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | ARM: dts: k2g-evm: Use standard compatible string for USB no-op PHYMarek Vasut2021-04-181-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The standard compatible string is "usb-nop-xceiv", use it. Note that keystone-k2g.dtsi already uses the aforementioned compat string, so this patch can only remove the override. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | arc: emsdp/iotdk: Use standard compatible string for USB no-op PHYMarek Vasut2021-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The standard compatible string is "usb-nop-xceiv", use it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * | phy: nop-phy: Add standard usb-nop-xceiv compat stringMarek Vasut2021-04-181-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB no-op PHY uses "usb-nop-xceiv" compatible string. This driver is compatible with USB no-op PHY, so add the compatible string. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
* | Merge tag 'ti-v2021.07-rc1' of ↵Tom Rini2021-04-187-69/+590
|\ \ | | | | | | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-ti - Support for pinmux status command on beaglebone - Updates for MMC speed modes for J721e-evm - Fix MMC booting on omap35_logic_somlv board
generated by cgit (git 2.34.1) at 2025-09-28 23:10:19 +0000