diff options
Diffstat (limited to 'include')
42 files changed, 2 insertions, 658 deletions
diff --git a/include/command.h b/include/command.h index be74f6ac92..2bfee89df3 100644 --- a/include/command.h +++ b/include/command.h @@ -109,7 +109,8 @@ int cmd_process_error(cmd_tbl_t *cmdtp, int err); #if defined(CONFIG_CMD_MEMORY) || \ defined(CONFIG_CMD_I2C) || \ defined(CONFIG_CMD_ITEST) || \ - defined(CONFIG_CMD_PCI) + defined(CONFIG_CMD_PCI) || \ + defined(CONFIG_CMD_SETEXPR) #define CMD_DATA_SIZE extern int cmd_get_data_size(char* arg, int default_size); #endif diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index d5fe053d5a..3ccd0925e2 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -25,8 +25,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -#define CONFIG_SPL_NAND_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_SKIP_RELOCATE #define CONFIG_SPL_COMMON_INIT_DDR diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 394aa7fb7d..b5d759ce02 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -20,7 +20,6 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -31,7 +30,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 87d5c20e66..1537b45cc1 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -28,7 +28,6 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -39,7 +38,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index b4a51a9528..e9371a025b 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -17,7 +17,6 @@ #ifdef CONFIG_NAND #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_TPL_DRIVERS_MISC_SUPPORT @@ -42,7 +41,6 @@ #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index a3f704c73b..c395d62379 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -209,12 +209,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_VSC7385_BASE 0xF8000000 -#ifdef CONFIG_VSC7385_ENET - - -#endif - - #define CONFIG_SYS_LED_BASE 0xF9000000 diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 13a7682958..37f51ba743 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -186,11 +186,6 @@ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 -#ifdef CONFIG_VSC7385_ENET - - -#endif - /* * Serial Port */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index c5730a79c9..025aa33083 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -23,8 +23,6 @@ #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_MMC_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_COMMON_INIT_DDR #endif @@ -45,8 +43,6 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_SPI_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_COMMON_INIT_DDR #endif @@ -56,7 +52,6 @@ #ifdef CONFIG_NAND #ifdef CONFIG_SECURE_BOOT #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -67,10 +62,8 @@ #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #else #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR @@ -94,7 +87,6 @@ #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #endif diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 84325846fd..62943a3b0c 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -20,8 +20,6 @@ #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_MMC_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_COMMON_INIT_DDR #endif @@ -38,8 +36,6 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_SPI_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_COMMON_INIT_DDR #endif @@ -51,7 +47,6 @@ #ifdef CONFIG_NAND #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR @@ -74,7 +69,6 @@ #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif /* High Level Configuration Options */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index c43cdd82e0..fe9a9097ce 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -44,9 +44,7 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg -#define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH @@ -56,12 +54,10 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg -#define CONFIG_SPL_SPI_BOOT #endif #ifdef CONFIG_SDCARD @@ -70,12 +66,10 @@ #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg -#define CONFIG_SPL_MMC_BOOT #endif #endif /* CONFIG_RAMBOOT_PBL */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index d90181f12a..5ab51e3233 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -47,13 +47,11 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #if defined(CONFIG_TARGET_T1024RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg #elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg #endif -#define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH @@ -63,7 +61,6 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif @@ -72,7 +69,6 @@ #elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg #endif -#define CONFIG_SPL_SPI_BOOT #endif #ifdef CONFIG_SDCARD @@ -81,7 +77,6 @@ #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif @@ -90,7 +85,6 @@ #elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg #endif -#define CONFIG_SPL_MMC_BOOT #endif #endif /* CONFIG_RAMBOOT_PBL */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index eeb09d26cc..56ddef07f5 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -46,7 +46,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #ifdef CONFIG_TARGET_T1040RDB #define CONFIG_SYS_FSL_PBL_RCW \ $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg @@ -67,7 +66,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg #define CONFIG_SYS_FSL_PBL_RCW \ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg #endif -#define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH @@ -77,7 +75,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif @@ -101,7 +98,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg #define CONFIG_SYS_FSL_PBL_RCW \ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg #endif -#define CONFIG_SPL_SPI_BOOT #endif #ifdef CONFIG_SDCARD @@ -110,7 +106,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif @@ -134,7 +129,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg #define CONFIG_SYS_FSL_PBL_RCW \ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg #endif -#define CONFIG_SPL_MMC_BOOT #endif #endif diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index b8cc9cc3d0..98bb3342b9 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -51,13 +51,11 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #if defined(CONFIG_ARCH_T2080) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg #elif defined(CONFIG_ARCH_T2081) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg #endif -#define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH @@ -67,7 +65,6 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif @@ -76,7 +73,6 @@ #elif defined(CONFIG_ARCH_T2081) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg #endif -#define CONFIG_SPL_SPI_BOOT #endif #ifdef CONFIG_SDCARD @@ -85,7 +81,6 @@ #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif @@ -94,7 +89,6 @@ #elif defined(CONFIG_ARCH_T2081) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg #endif -#define CONFIG_SPL_MMC_BOOT #endif #endif /* CONFIG_RAMBOOT_PBL */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 84b3e00e89..4b53e19fd4 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -45,9 +45,7 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg -#define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH @@ -57,12 +55,10 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg -#define CONFIG_SPL_SPI_BOOT #endif #ifdef CONFIG_SDCARD @@ -71,12 +67,10 @@ #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg -#define CONFIG_SPL_MMC_BOOT #endif #endif /* CONFIG_RAMBOOT_PBL */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index ec31116a12..f17625365e 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -31,9 +31,7 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg -#define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SDCARD @@ -45,9 +43,7 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg -#define CONFIG_SPL_MMC_BOOT #endif #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index ecdd0777c5..0accdc6119 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -35,9 +35,7 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg -#define CONFIG_SPL_MMC_BOOT #endif #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 7721907d8f..b5fba0a8b0 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -31,9 +31,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -/* Custom script for NOR */ -#define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds" - /* Always 128 KiB env size */ #define CONFIG_ENV_SIZE SZ_128K diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h deleted file mode 100644 index 901ce4da61..0000000000 --- a/include/configs/ap325rxa.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas Solutions AP-325RXA board - * - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> - */ - -#ifndef __AP325RXA_H -#define __AP325RXA_H - -#define CONFIG_CPU_SH7723 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* MEMORY */ -#define AP325RXA_SDRAM_BASE (0x88000000) -#define AP325RXA_FLASH_BASE_1 (0xA0000000) -#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024) - -/* undef to save memory */ -/* Monitor Command Prompt */ -/* Buffer size for Console output */ -#define CONFIG_SYS_PBSIZE 256 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 38400 } - -/* SCIF */ -#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */ -#define CONFIG_CONS_SCIF5 1 - -/* Suppress display of console information at boot */ - -#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE) -/* maybe more, but if so u-boot doesn't know about it... */ -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -/* default load address for scripts ?!? */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -/* Physical start address of Flash memory */ -#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1) -/* Max number of sectors on each Flash chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * IDE support - */ -#define CONFIG_IDE_RESET 1 -#define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000 -#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __AP325RXA_H */ diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h deleted file mode 100644 index edcc0cbc8a..0000000000 --- a/include/configs/ap_sh4a_4a.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Alpha Project AP-SH4A-4A board - * - * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> - */ - -#ifndef __AP_SH4A_4A_H -#define __AP_SH4A_4A_H - -#define CONFIG_CPU_SH7734 1 -#define CONFIG_400MHZ_MODE 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT (0) -#define CONFIG_SH_ETHER_PHY_ADDR (0x0) -#define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII) -#define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */ -#define CONFIG_BITBANGMII -#define CONFIG_BITBANGMII_MULTI - -/* undef to save memory */ -/* Monitor Command Prompt */ -/* Buffer size for Console output */ -#define CONFIG_SYS_PBSIZE 256 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_SCIF 1 -#define CONFIG_CONS_SCIF4 1 - -/* Suppress display of console information at boot */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x88000000) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE) -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#if defined(CONFIG_400MHZ_MODE) -#define CONFIG_SYS_CLK_FREQ 50000000 -#else -#define CONFIG_SYS_CLK_FREQ 44444444 -#endif -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __AP_SH4A_4A_H */ diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index be2c5a2293..780ae618e0 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -29,8 +29,6 @@ /* Networking */ #define FEC_QUIRK_ENET_MAC -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE SZ_4K #define CONFIG_TFTP_TSIZE #define CONFIG_IPADDR 192.168.10.2 diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 490ca64b10..b4ddd1bdc6 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -31,8 +31,6 @@ #define CONFIG_E1000_NO_NVM /* General networking support */ -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 16352 #define CONFIG_TFTP_TSIZE #undef CONFIG_IPADDR diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 54094e495a..4b0a3fb26b 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -59,8 +59,6 @@ #define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 6 -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 4096 #define CONFIG_TFTP_TSIZE /* USB Configs */ diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 77a5968cc2..f6adfeb96a 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -28,8 +28,6 @@ #define CONFIG_E1000_NO_NVM /* General networking support */ -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 16352 #define CONFIG_TFTP_TSIZE /* Increase console I/O buffer size */ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 98ec0d626e..fbf657fe65 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -25,9 +25,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -/* Custom script for NOR */ -#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds" - /* Always 128 KiB env size */ #define CONFIG_ENV_SIZE (128 << 10) diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 3d4d08aa70..0525efac8f 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -31,9 +31,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -/* Custom script for NOR */ -#define CONFIG_SYS_LDSCRIPT "board/birdland/bav335x/u-boot.lds" - /* Always 128 KiB env size */ #define CONFIG_ENV_SIZE (128 << 10) diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index b221e118fa..21d9a3da01 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -19,8 +19,6 @@ #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) /* Network */ -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 16352 #define CONFIG_TFTP_TSIZE /* ENET1 */ diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index c6a38d5118..e15bab29ba 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -29,8 +29,6 @@ /* Networking */ #define FEC_QUIRK_ENET_MAC -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE SZ_4K #define CONFIG_TFTP_TSIZE #define CONFIG_IPADDR 192.168.10.2 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 1cdf83d82d..86f3f0d4fa 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -50,8 +50,6 @@ #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 1 -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 16352 #define CONFIG_TFTP_TSIZE /* USB Configs */ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 545f506e97..40173b18fa 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -22,8 +22,6 @@ #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 16352 #define CONFIG_TFTP_TSIZE /* ENET1 */ diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 6c4e9d4154..cd7e168781 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -18,8 +18,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_COLIBRI_TEGRA2 /* General networking support */ -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 1536 #define CONFIG_TFTP_TSIZE /* LCD support */ diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index 7ece00e646..8ff6433f45 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -27,8 +27,6 @@ #define CONFIG_SYS_MMC_ENV_PART 1 /* General networking support */ -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 16352 #define CONFIG_TFTP_TSIZE /* Increase console I/O buffer size */ diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index 7155ebac5c..bf0e0315c2 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -25,8 +25,6 @@ /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 19000000 -#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds" - /* Fixup - in init code we switch from device to host mode, * it has to be done after each HCD reset */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h index cc4a4cb3f4..a41df22273 100644 --- a/include/configs/dragonboard820c.h +++ b/include/configs/dragonboard820c.h @@ -23,7 +23,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard820c/u-boot.lds" /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 19000000 diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 3d90dbcf93..84cbcdda93 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -31,8 +31,6 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_BOOTFILE "edb93xx.img" -#define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" - #ifdef CONFIG_EDB9301 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 #define CONFIG_ENV_SECT_SIZE 0x00020000 diff --git a/include/configs/espt.h b/include/configs/espt.h deleted file mode 100644 index 0339de4081..0000000000 --- a/include/configs/espt.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the ESPT-GIGA board - * - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> - */ - -#ifndef __ESPT_H -#define __ESPT_H - -#define CONFIG_CPU_SH7763 1 -#define __LITTLE_ENDIAN 1 - -#define CONFIG_ENV_OVERWRITE 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* SCIF */ -#define CONFIG_CONS_SCIF0 1 - -#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate - settings for this board */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x8C000000) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -/* Flash(NOR) S29JL064H */ -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) -#define CONFIG_SYS_MAX_FLASH_BANKS (1) -#define CONFIG_SYS_MAX_FLASH_SECT (150) - -/* U-Boot setting */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) -/* Use hardware flash sectors protection instead of U-Boot software protection */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - -/* Clock */ -#define CONFIG_SYS_CLK_FREQ 66666666 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT (1) -#define CONFIG_SH_ETHER_PHY_ADDR (0x00) -#define CONFIG_BITBANGMII -#define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII - -#endif /* __SH7763RDP_H */ diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h deleted file mode 100644 index 241ba69fa0..0000000000 --- a/include/configs/ms7722se.h +++ /dev/null @@ -1,83 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Hitachi Solution Engine 7722 - * - * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - */ - -#ifndef __MS7722SE_H -#define __MS7722SE_H - -#define CONFIG_CPU_SH7722 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* SMC9111 */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (0xB8000000) - -/* MEMORY */ -#define MS7722SE_SDRAM_BASE (0x8C000000) -#define MS7722SE_FLASH_BASE_1 (0xA0000000) -#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ - -/* SCIF */ -#define CONFIG_CONS_SCIF0 1 - -#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -#undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */ - -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */ - -#define CONFIG_SYS_SDRAM_BASE (MS7722SE_SDRAM_BASE) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */ - -#define CONFIG_SYS_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image - in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_SYS_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */ - -#define CONFIG_SYS_MAX_FLASH_SECT 150 /* Max number of sectors on each - Flash chip */ - -/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \ - CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \ - } - -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ - -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (8 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __MS7722SE_H */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h deleted file mode 100644 index 949fc04cc8..0000000000 --- a/include/configs/ms7750se.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Hitachi Solution Engine 7750 - * - * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - */ - -#ifndef __MS7750SE_H -#define __MS7750SE_H - -#define CONFIG_CPU_SH7750 1 -/* #define CONFIG_CPU_SH7751 1 */ -/* #define CONFIG_CPU_TYPE_R 1 */ -#define __LITTLE_ENDIAN__ 1 - -#define CONFIG_DISPLAY_BOARDINFO - -/* - * Command line configuration. - */ -#define CONFIG_CONS_SCIF1 1 - -#define CONFIG_ENV_OVERWRITE 1 - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x8C000000) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) - -/* NOR Flash */ -/* #define CONFIG_SYS_FLASH_BASE (0xA1000000)*/ -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_MAX_FLASH_BANKS (1) /* Max number of - * Flash memory banks - */ -#define CONFIG_SYS_MAX_FLASH_SECT 142 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) /* Address of u-boot image in Flash */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ - -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) -#define CONFIG_SYS_RX_ETH_BUFFER (8) - -#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __MS7750SE_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 19ba022ec5..d9312bd149 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -142,8 +142,6 @@ #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_MMC_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_COMMON_INIT_DDR #endif @@ -160,8 +158,6 @@ #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_SPI_BOOT #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_COMMON_INIT_DDR #endif @@ -169,7 +165,6 @@ #ifdef CONFIG_NAND #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR @@ -194,7 +189,6 @@ #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h deleted file mode 100644 index 3e4ef763c9..0000000000 --- a/include/configs/r0p7734.h +++ /dev/null @@ -1,100 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas Solutions r0p7734 board - * - * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> - */ - -#ifndef __R0P7734_H -#define __R0P7734_H - -#define CONFIG_CPU_SH7734 1 -#define CONFIG_400MHZ_MODE 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT (0) -#define CONFIG_SH_ETHER_PHY_ADDR (0x0) -#define CONFIG_PHY_SMSC 1 -#define CONFIG_BITBANGMII -#define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */ -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII - -/* undef to save memory */ -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_SCIF 1 -#define CONFIG_CONS_SCIF3 1 - -/* Suppress display of console information at boot */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x88000000) -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024) -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#if defined(CONFIG_400MHZ_MODE) -#define CONFIG_SYS_CLK_FREQ 50000000 -#else -#define CONFIG_SYS_CLK_FREQ 44444444 -#endif -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __R0P7734_H */ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index bf03baefe8..50affaf1a8 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -71,7 +71,6 @@ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_SERVERIP -#define CONFIG_IP_DEFRAG #ifndef SANDBOX_NO_SDL #define CONFIG_SANDBOX_SDL diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 2cc36e793b..296f4502c6 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -41,9 +41,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_MAY_FAIL -#define CONFIG_IP_DEFRAG -#define CONFIG_TFTP_BLOCKSIZE 4096 - /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x8000000 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 143dc7bb22..b51914d1e0 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -276,8 +276,6 @@ /* Boot FreeBSD/vxWorks from an ELF image */ #define CONFIG_SYS_MMC_MAX_DEVICE 1 -#define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds" - /* MMC support */ #ifdef CONFIG_MMC_SDHCI_ZYNQ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |