diff options
Diffstat (limited to 'include/cmd_confdefs.h')
| -rw-r--r-- | include/cmd_confdefs.h | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h deleted file mode 100644 index b3ccdcea2b..0000000000 --- a/include/cmd_confdefs.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Definitions for Configuring the monitor commands - */ -#ifndef _CMD_CONFIG_H -#define _CMD_CONFIG_H - -/* - * Configurable monitor commands - */ -#define CFG_CMD_BDI 0x00000001ULL /* bdinfo */ -#define CFG_CMD_LOADS 0x00000002ULL /* loads */ -#define CFG_CMD_LOADB 0x00000004ULL /* loadb */ -#define CFG_CMD_IMI 0x00000008ULL /* iminfo */ -#define CFG_CMD_CACHE 0x00000010ULL /* icache, dcache */ -#define CFG_CMD_FLASH 0x00000020ULL /* flinfo, erase, protect */ -#define CFG_CMD_MEMORY 0x00000040ULL /* md, mm, nm, mw, cp, cmp, */ - /* crc, base, loop, mtest */ -#define CFG_CMD_NET 0x00000080ULL /* bootp, tftpboot, rarpboot */ -#define CFG_CMD_ENV 0x00000100ULL /* saveenv */ -#define CFG_CMD_KGDB 0x0000000000000200ULL /* kgdb */ -#define CFG_CMD_PCMCIA 0x00000400ULL /* PCMCIA support */ -#define CFG_CMD_IDE 0x00000800ULL /* IDE harddisk support */ -#define CFG_CMD_PCI 0x00001000ULL /* pciinfo */ -#define CFG_CMD_IRQ 0x00002000ULL /* irqinfo */ -#define CFG_CMD_BOOTD 0x00004000ULL /* bootd */ -#define CFG_CMD_CONSOLE 0x00008000ULL /* coninfo */ -#define CFG_CMD_EEPROM 0x00010000ULL /* EEPROM read/write support */ -#define CFG_CMD_ASKENV 0x00020000ULL /* ask for env variable */ -#define CFG_CMD_RUN 0x00040000ULL /* run command in env variable */ -#define CFG_CMD_ECHO 0x00080000ULL /* echo arguments */ -#define CFG_CMD_I2C 0x00100000ULL /* I2C serial bus support */ -#define CFG_CMD_REGINFO 0x00200000ULL /* Register dump */ -#define CFG_CMD_IMMAP 0x00400000ULL /* IMMR dump support */ -#define CFG_CMD_DATE 0x00800000ULL /* support for RTC, date/time...*/ -#define CFG_CMD_DHCP 0x01000000ULL /* DHCP Support */ -#define CFG_CMD_BEDBUG 0x02000000ULL /* Include BedBug Debugger */ -#define CFG_CMD_FDC 0x04000000ULL /* Floppy Disk Support */ -#define CFG_CMD_SCSI 0x08000000ULL /* SCSI Support */ -#define CFG_CMD_AUTOSCRIPT 0x10000000ULL /* Autoscript Support */ -#define CFG_CMD_MII 0x20000000ULL /* MII support */ -#define CFG_CMD_SETGETDCR 0x40000000ULL /* DCR support on 4xx */ -#define CFG_CMD_BSP 0x80000000ULL /* Board Specific functions */ - -#define CFG_CMD_ELF 0x0000000100000000ULL /* ELF (VxWorks) load/boot cmd */ -#define CFG_CMD_MISC 0x0000000200000000ULL /* Misc functions like sleep etc*/ -#define CFG_CMD_USB 0x0000000400000000ULL /* USB Support */ -#define CFG_CMD_DOC 0x0000000800000000ULL /* Disk-On-Chip Support */ -#define CFG_CMD_JFFS2 0x0000001000000000ULL /* JFFS2 Support */ -#define CFG_CMD_DTT 0x0000002000000000ULL /* Digital Therm and Thermostat */ -#define CFG_CMD_SDRAM 0x0000004000000000ULL /* SDRAM DIMM SPD info printout */ -#define CFG_CMD_DIAG 0x0000008000000000ULL /* Diagnostics */ -#define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */ -#define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */ -#define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */ -#define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */ -#define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */ -#define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */ -#define CFG_CMD_NAND 0x0000800000000000ULL /* NAND support */ -#define CFG_CMD_BMP 0x0001000000000000ULL /* BMP support */ -#define CFG_CMD_PORTIO 0x0002000000000000ULL /* Port I/O */ -#define CFG_CMD_PING 0x0004000000000000ULL /* ping support */ -#define CFG_CMD_MMC 0x0008000000000000ULL /* MMC support */ -#define CFG_CMD_FAT 0x0010000000000000ULL /* FAT support */ -#define CFG_CMD_IMLS 0x0020000000000000ULL /* List all found images */ -#define CFG_CMD_ITEST 0x0040000000000000ULL /* Integer (and string) test */ -#define CFG_CMD_NFS 0x0080000000000000ULL /* NFS support */ -#define CFG_CMD_REISER 0x0100000000000000ULL /* Reiserfs support */ -#define CFG_CMD_CDP 0x0200000000000000ULL /* Cisco Discovery Protocol */ -#define CFG_CMD_XIMG 0x0400000000000000ULL /* Load part of Multi Image */ -#define CFG_CMD_UNIVERSE 0x0800000000000000ULL /* Tundra Universe Support */ -#define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */ -#define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */ -#define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */ -#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */ - -#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */ - -/* Commands that are considered "non-standard" for some reason - * (memory hogs, requires special hardware, not fully tested, etc.) - */ -#define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_CDP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FAT | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MFSL | \ - CFG_CMD_MII | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_PING | \ - CFG_CMD_PORTIO | \ - CFG_CMD_REGINFO | \ - CFG_CMD_REISER | \ - CFG_CMD_SAVES | \ - CFG_CMD_SCSI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP | \ - CFG_CMD_SPI | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_USB | \ - CFG_CMD_VFD ) - -/* Default configuration - */ -#define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD) - -#ifndef CONFIG_COMMANDS -#define CONFIG_COMMANDS CONFIG_CMD_DFL -#endif - - -/* - * optional BOOTP fields - */ - -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_NISDOMAIN 0x00000008 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 -#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020 -#define CONFIG_BOOTP_DNS 0x00000040 -#define CONFIG_BOOTP_DNS2 0x00000080 -#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100 -#define CONFIG_BOOTP_NTPSERVER 0x00000200 -#define CONFIG_BOOTP_TIMEOFFSET 0x00000400 - -#define CONFIG_BOOTP_VENDOREX 0x80000000 - -#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX) - - -#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \ - CONFIG_BOOTP_GATEWAY | \ - CONFIG_BOOTP_HOSTNAME | \ - CONFIG_BOOTP_BOOTPATH) - -#ifndef CONFIG_BOOTP_MASK -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -#endif - -#endif /* _CMD_CONFIG_H */ |