diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/gpio/intel,apl-gpio.txt | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt new file mode 100644 index 0000000000..e27a40b437 --- /dev/null +++ b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt @@ -0,0 +1,55 @@ +Intel Apollo Lake GPIO controller + +The Apollo Lake (APL) GPIO controller is used to control GPIO functions of +the pins. + +Required properties: +- compatible: "intel,apl-gpio" +- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client + nodes should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [flags]> + + Values for gpio specifier: + - Pin number: is a GPIO pin number between 0 and 244 + - Flags: GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW + +- gpio-controller: Specifies that the node is a gpio controller. + +Example: + +... +{ + p2sb: p2sb@d,0 { + reg = <0x02006810 0 0 0 0>; + compatible = "intel,apl-p2sb"; + early-regs = <IOMAP_P2SB_BAR 0x100000>; + + north { + compatible = "intel,apl-pinctrl"; + intel,p2sb-port-id = <PID_GPIO_N>; + gpio_n: gpio-n { + compatible = "intel,gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c_2: i2c2@16,2 { + compatible = "intel,apl-i2c", "snps,designware-i2c-pci"; + reg = <0x0200b210 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + tpm@50 { + reg = <0x50>; + compatible = "google,cr50"; + u-boot,i2c-offset-len = <0>; + ready-gpio = <&gpio_n GPIO_28 GPIO_ACTIVE_LOW>; + }; + }; + +}; +... |