diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.nokia_rx51 | 15 | ||||
| -rw-r--r-- | doc/board/intel/slimbootloader.rst | 2 | ||||
| -rw-r--r-- | doc/build/source.rst | 2 | ||||
| -rw-r--r-- | doc/develop/py_testing.rst | 2 |
4 files changed, 4 insertions, 17 deletions
diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51 index 320b5efc7d..84d1912ddd 100644 --- a/doc/README.nokia_rx51 +++ b/doc/README.nokia_rx51 @@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in following repository: There is support for hardware watchdog. Hardware watchdog is started by NOLO so u-boot must kick watchdog to prevent reboot device (but not very often, max every 2 seconds). There is also support for framebuffer display -output with ANSI escape codes and the N900 HW keyboard input. USB tty works -but is disabled because it prevents the current Maemo kernel from booting. +output with ANSI escape codes and the N900 HW keyboard input. When U-Boot is starting it enable IBE bit in Auxiliary Control Register, which is needed for Thumb-2 ISA support. It is workaround for errata 430973. @@ -49,10 +48,6 @@ Boot from SD or eMMC in this order: Available additional commands/variables: - * run sercon - Use serial port for control - * run usbcon - Use usbtty for control - * run vgacon - Use framebuffer and HW keyboard for control (default) - * run sdboot - Boot from external SD card (see boot order) * run emmcboot - Boot from internal eMMC memory (see boot order) * run attachboot - Boot attached kernel image (attached to U-Boot binary) @@ -87,14 +82,6 @@ Additional variables for booting kernel: and u-boot standard output is set to serial then setup_console_atag is automatically set to 1. So output from Maemo kernel would go to serial port. -USB TTY: - - Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled. - For enabling USB TTY just add this line to file include/configs/nokia_rx51.h - - #define CONFIG_USB_TTY - - UBIFS support: UBIFS support is disabled, because U-Boot image is too big and cannot be diff --git a/doc/board/intel/slimbootloader.rst b/doc/board/intel/slimbootloader.rst index a8c41b1aa7..18f1cc0569 100644 --- a/doc/board/intel/slimbootloader.rst +++ b/doc/board/intel/slimbootloader.rst @@ -170,7 +170,7 @@ Build Instruction to use ELF U-Boot $ python BuildLoader.py build <qemu or apl> -p "OsLoader.efi:LLDR:Lz4;u-boot:U-BT:Lzma" -.. _U-Boot: https://gitlab.denx.de/ +.. _U-Boot: https://source.denx.de/ .. _`Slim Bootloader`: https://github.com/slimbootloader/ .. _`Intel FSP`: https://github.com/IntelFsp/ .. _`Getting Started`: https://slimbootloader.github.io/getting-started/ diff --git a/doc/build/source.rst b/doc/build/source.rst index 75720e2027..470f793985 100644 --- a/doc/build/source.rst +++ b/doc/build/source.rst @@ -7,7 +7,7 @@ You can download the source via .. code-block:: bash - git clone https://gitlab.denx.de/u-boot/u-boot.git + git clone https://source.denx.de/u-boot/u-boot.git A mirror of the source is maintained on Github diff --git a/doc/develop/py_testing.rst b/doc/develop/py_testing.rst index f71e837aa9..7f01858cfd 100644 --- a/doc/develop/py_testing.rst +++ b/doc/develop/py_testing.rst @@ -301,7 +301,7 @@ saving wear on the flash chip(s). Examples '''''''' -https://github.com/swarren/uboot-test-hooks contains some working example hook +https://source.denx.de/u-boot/u-boot-test-hooks contains some working example hook scripts, and may be useful as a reference when implementing hook scripts for your platform. These scripts are not considered part of U-Boot itself. |