3 files changed, 5 insertions, 5 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 521491820d..c28fc463b5 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -389,7 +389,7 @@ static unsigned long sdram_memsize(void)
  *		 banks appropriately. If Auto Memory Configuration is
  *		 not used, it is assumed that no DIMM is plugged
  *-----------------------------------------------------------------------------*/
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
 	unsigned char spd0[MAX_SPD_BYTES];
@@ -3081,7 +3081,7 @@ static void ppc440sp_sdram_register_dump(void)
  * 		banks. The configuration is performed using static, compile-
  *		time parameters.
  *---------------------------------------------------------------------------*/
-long initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	/*
 	 * Only run this SDRAM init code once. For NAND booting
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
index ad805b937b..3bd637567c 100644
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -1022,7 +1022,7 @@ static void program_ddr0_44(unsigned long dimm_ranks[],
  *		 banks appropriately. If Auto Memory Configuration is
  *		 not used, it is assumed that no DIMM is plugged
  *-----------------------------------------------------------------------------*/
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
 	unsigned long dimm_ranks[MAXDIMMS];
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index c7771addaa..7d60ad667f 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -164,7 +164,7 @@ static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
 /*
  * Autodetect onboard SDRAM on 405 platforms
  */
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	ulong speed;
 	ulong sdtr1;
@@ -346,7 +346,7 @@ static void sdram_tr1_set(int ram_address, int* tr1_value)
  *	 so this should be extended for other future boards
  *	 using this routine!
  */
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
 	int i;
 	int tr1_bank1;