diff options
Diffstat (limited to 'board/siemens')
| -rw-r--r-- | board/siemens/common/board.c | 46 | ||||
| -rw-r--r-- | board/siemens/draco/Makefile (renamed from board/siemens/dxr2/Makefile) | 0 | ||||
| -rw-r--r-- | board/siemens/draco/board.c (renamed from board/siemens/dxr2/board.c) | 112 | ||||
| -rw-r--r-- | board/siemens/draco/board.h (renamed from board/siemens/dxr2/board.h) | 26 | ||||
| -rw-r--r-- | board/siemens/draco/mux.c (renamed from board/siemens/dxr2/mux.c) | 2 | ||||
| -rw-r--r-- | board/siemens/pxm2/board.c | 10 | ||||
| -rw-r--r-- | board/siemens/rut/board.c | 2 |
7 files changed, 125 insertions, 73 deletions
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 7e8731bb3b..2782bcc2a7 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -128,12 +128,6 @@ do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) button = 0; gpio_free(gpio); - if (!button) { - /* LED0 - RED=1: GPIO2_0 2*32 = 64 */ - gpio_request(BOARD_DFU_BUTTON_LED, ""); - gpio_direction_output(BOARD_DFU_BUTTON_LED, 1); - gpio_set_value(BOARD_DFU_BUTTON_LED, 1); - } return button; } @@ -144,6 +138,46 @@ U_BOOT_CMD( "" ); #endif +/* + * This command sets led + * Input - name of led + * value of led + * Returns - 1 if input does not match + * 0 if led was set + */ +static int +do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int gpio = 0; + if (argc != 3) + goto exit; +#if defined(BOARD_STATUS_LED) + if (!strcmp(argv[1], "stat")) + gpio = BOARD_STATUS_LED; +#endif +#if defined(BOARD_DFU_BUTTON_LED) + if (!strcmp(argv[1], "dfu")) + gpio = BOARD_DFU_BUTTON_LED; +#endif + /* If argument does not mach exit */ + if (gpio == 0) + goto exit; + gpio_request(gpio, ""); + gpio_direction_output(gpio, 1); + if (!strcmp(argv[2], "1")) + gpio_set_value(gpio, 1); + else + gpio_set_value(gpio, 0); + return 0; +exit: + return 1; +} + +U_BOOT_CMD( + led, CONFIG_SYS_MAXARGS, 2, do_setled, + "Set led on or off", + "dfu val - set dfu led\nled stat val - set status led" +); static int do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/board/siemens/dxr2/Makefile b/board/siemens/draco/Makefile index f15993216b..f15993216b 100644 --- a/board/siemens/dxr2/Makefile +++ b/board/siemens/draco/Makefile diff --git a/board/siemens/dxr2/board.c b/board/siemens/draco/board.c index 38ac93d795..9be2e344f8 100644 --- a/board/siemens/dxr2/board.c +++ b/board/siemens/draco/board.c @@ -1,5 +1,5 @@ /* - * Board functions for TI AM335X based dxr2 board + * Board functions for TI AM335X based draco board * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. * @@ -37,13 +37,27 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD -static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; -/* @303MHz-i0 */ +static struct draco_baseboard_id __attribute__((section(".data"))) settings; + +#if DDR_PLL_FREQ == 303 +/* Default@303MHz-i0 */ +const struct ddr3_data ddr3_default = { + 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F, + 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x0000093B, 0x0000014A, + "default name @303MHz \0", + "default marking \0", +}; +#elif DDR_PLL_FREQ == 400 +/* Default@400MHz-i0 */ const struct ddr3_data ddr3_default = { - 0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4, - 0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab, + 0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232, 0x00000618, 0x0000014A, + "default name @400MHz \0", + "default marking \0", }; +#endif static void set_default_ddr3_timings(void) { @@ -53,8 +67,12 @@ static void set_default_ddr3_timings(void) static void print_ddr3_timings(void) { - printf("\n\nDDR3 Timing parameters:\n"); - printf("Diff Eeprom Default\n"); + printf("\nDDR3\n"); + printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ); + printf("device:\t\t%s\n", settings.ddr3.manu_name); + printf("marking:\t%s\n", settings.ddr3.manu_marking); + printf("timing parameters\n"); + printf("diff\teeprom\tdefault\n"); PRINTARGS(magic); PRINTARGS(version); PRINTARGS(ddr3_sratio); @@ -78,9 +96,9 @@ static void print_ddr3_timings(void) static void print_chip_data(void) { - printf("\n"); - printf("Device: '%s'\n", settings.chip.sdevname); - printf("HW version: '%s'\n", settings.chip.shwver); + printf("\nCPU BOARD\n"); + printf("device: \t'%s'\n", settings.chip.sdevname); + printf("hw version: \t'%s'\n", settings.chip.shwver); } #endif /* CONFIG_SPL_BUILD */ @@ -112,20 +130,18 @@ static int read_eeprom(void) printf("Using DDR3 settings from EEPROM\n"); } else { if (ddr3_default.magic != settings.ddr3.magic) - printf("Error: No valid DDR3 data in eeprom.\n"); + printf("Warning: No valid DDR3 data in eeprom.\n"); if (ddr3_default.version != settings.ddr3.version) - printf("Error: DDR3 data version does not match.\n"); + printf("Warning: DDR3 data version does not match.\n"); printf("Using default settings\n"); set_default_ddr3_timings(); } - if (MAGIC_CHIP == settings.chip.magic) { - printf("Valid chip data in eeprom\n"); + if (MAGIC_CHIP == settings.chip.magic) print_chip_data(); - } else { - printf("Error: No chip data in eeprom\n"); - } + else + printf("Warning: No chip data in eeprom\n"); print_ddr3_timings(); #endif @@ -135,48 +151,48 @@ static int read_eeprom(void) #ifdef CONFIG_SPL_BUILD static void board_init_ddr(void) { -struct emif_regs dxr2_ddr3_emif_reg_data = { +struct emif_regs draco_ddr3_emif_reg_data = { .zq_config = 0x50074BE4, }; -struct ddr_data dxr2_ddr3_data = { +struct ddr_data draco_ddr3_data = { }; -struct cmd_control dxr2_ddr3_cmd_ctrl_data = { +struct cmd_control draco_ddr3_cmd_ctrl_data = { }; -struct ctrl_ioregs dxr2_ddr3_ioregs = { +struct ctrl_ioregs draco_ddr3_ioregs = { }; /* pass values from eeprom */ - dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; - dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; - dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; - dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = + draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; + draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; + draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; + draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = settings.ddr3.emif_ddr_phy_ctlr_1; - dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; - dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; - - dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; - dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; - dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; - dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; - - dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; - dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; - dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; - - dxr2_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val, - - config_ddr(DDR_PLL_FREQ, &dxr2_ddr3_ioregs, &dxr2_ddr3_data, - &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); + draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; + draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; + + draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; + draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; + draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; + draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; + + draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; + draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; + draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; + + draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val, + + config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data, + &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0); } static void spl_siemens_board_init(void) diff --git a/board/siemens/dxr2/board.h b/board/siemens/draco/board.h index abf5432329..ff8ab764c5 100644 --- a/board/siemens/dxr2/board.h +++ b/board/siemens/draco/board.h @@ -22,24 +22,26 @@ #define MAGIC_CHIP 0x50494843 /* Automatic generated definition */ -/* Wed, 18 Sep 2013 18:58:27 +0200 */ -/* From file: draco/ddr3-data-micron-v2.txt */ +/* Wed, 16 Apr 2014 16:50:41 +0200 */ +/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */ struct ddr3_data { unsigned int magic; /* 0x33524444 */ - unsigned int version; /* 0x56312e34 */ - unsigned short int ddr3_sratio; /* 0x0100 */ - unsigned short int iclkout; /* 0x0001 */ + unsigned int version; /* 0x56312e35 */ + unsigned short int ddr3_sratio; /* 0x0080 */ + unsigned short int iclkout; /* 0x0000 */ unsigned short int dt0rdsratio0; /* 0x003A */ - unsigned short int dt0wdsratio0; /* 0x008A */ - unsigned short int dt0fwsratio0; /* 0x010B */ - unsigned short int dt0wrsratio0; /* 0x00C4 */ + unsigned short int dt0wdsratio0; /* 0x003F */ + unsigned short int dt0fwsratio0; /* 0x009F */ + unsigned short int dt0wrsratio0; /* 0x0079 */ unsigned int sdram_tim1; /* 0x0888A39B */ unsigned int sdram_tim2; /* 0x26247FDA */ unsigned int sdram_tim3; /* 0x501F821F */ unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */ - unsigned int sdram_config; /* 0x61C04AB2 */ - unsigned int ref_ctrl; /* 0x00000618 */ - unsigned int ioctr_val; /* 0x0000018B */ + unsigned int sdram_config; /* 0x61A44A32 */ + unsigned int ref_ctrl; /* 0x0000093B */ + unsigned int ioctr_val; /* 0x0000014A */ + char manu_name[32]; /* "default@303MHz \0" */ + char manu_marking[32]; /* "default \0" */ }; struct chip_data { @@ -48,7 +50,7 @@ struct chip_data { char shwver[7]; }; -struct dxr2_baseboard_id { +struct draco_baseboard_id { struct ddr3_data ddr3; struct chip_data chip; }; diff --git a/board/siemens/dxr2/mux.c b/board/siemens/draco/mux.c index f2314b5d3e..eaa3c70798 100644 --- a/board/siemens/dxr2/mux.c +++ b/board/siemens/draco/mux.c @@ -1,5 +1,5 @@ /* - * pinmux setup for siemens dxr2 board + * pinmux setup for siemens draco board * * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 98083d52cd..64e69dc93d 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -70,11 +70,11 @@ struct cmd_control pxm2_ddr3_cmd_ctrl_data = { }; const struct ctrl_ioregs ioregs = { - .cm0ioctl = DXR2_IOCTRL_VAL, - .cm1ioctl = DXR2_IOCTRL_VAL, - .cm2ioctl = DXR2_IOCTRL_VAL, - .dt0ioctl = DXR2_IOCTRL_VAL, - .dt1ioctl = DXR2_IOCTRL_VAL, + .cm0ioctl = DDR_IOCTRL_VAL, + .cm1ioctl = DDR_IOCTRL_VAL, + .cm2ioctl = DDR_IOCTRL_VAL, + .dt0ioctl = DDR_IOCTRL_VAL, + .dt1ioctl = DDR_IOCTRL_VAL, }; config_ddr(DDR_PLL_FREQ, &ioregs, &pxm2_ddr3_data, diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index e0ada3f6a5..1752df2c4f 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -400,7 +400,7 @@ static int conf_disp_pll(int m, int n) #if defined(DISPL_PLL_SPREAD_SPECTRUM) writel(0x64, &cmwkup->resv6[3]); /* 0x50 */ writel(0x800, &cmwkup->resv6[2]); /* 0x4c */ - writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12), + writel(readl(&cmwkup->clkmoddplldisp) | CM_CLKMODE_DPLL_SSC_EN_MASK, &cmwkup->clkmoddplldisp); /* 0x98 */ #endif return 0; |