diff options
Diffstat (limited to 'board/ns9750dev/ns9750dev.c')
| -rw-r--r-- | board/ns9750dev/ns9750dev.c | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c new file mode 100644 index 0000000000..0ea89a5d80 --- /dev/null +++ b/board/ns9750dev/ns9750dev.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * (C) Copyright 2003 + * Texas Instruments, <www.ti.com> + * Kshitij Gupta <Kshitij@ti.com> + * + * Copyright (C) 2004 by FS Forth-Systeme GmbH. + * All rights reserved. + * Markus Pietrek <mpietrek@fsforth.de> + * derived from omap1610innovator.c + * @References: [1] NS9750 Hardware Reference/December 2003 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#if defined(CONFIG_NS9750DEV) +# include <./configs/ns9750dev.h> +# include <./ns9750_bbus.h> +#endif + +void flash__init( void ); +void ether__init( void ); + +static inline void delay( unsigned long loops ) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + + +/*********************************************************************** + * @Function: board_init + * @Return: 0 + * @Descr: Enables BBUS modules and other devices + ***********************************************************************/ + +int board_init( void ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Active BBUS modules */ + *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0; + +#warning TODO check numbers + /* arch number of OMAP 1510-Board */ + /* to be changed for OMAP 1610 Board */ + gd->bd->bi_arch_number = 234; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x10000100; + + +/* this speeds up your boot a quite a bit. However to make it + * work, you need make sure your kernel startup flush bug is fixed. + * ... rkw ... + */ + icache_enable(); + + flash__init(); + ether__init(); + return 0; +} + + +int misc_init_r (void) +{ + /* currently empty */ + return (0); +} + +/****************************** + Routine: + Description: +******************************/ +void flash__init (void) +{ +} +/************************************************************* + Routine:ether__init + Description: take the Ethernet controller out of reset and wait + for the EEPROM load to complete. +*************************************************************/ +void ether__init (void) +{ +} + +/****************************** + Routine: + Description: +******************************/ +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + +#if CONFIG_NR_DRAM_BANKS > 1 + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +#endif + return 0; +} |