summaryrefslogtreecommitdiffstats
path: root/board/mpl
diff options
context:
space:
mode:
Diffstat (limited to 'board/mpl')
-rw-r--r--board/mpl/common/common_util.c4
-rw-r--r--board/mpl/vcma9/config.mk4
-rw-r--r--board/mpl/vcma9/memsetup.S12
-rw-r--r--board/mpl/vcma9/vcma9.c95
-rw-r--r--board/mpl/vcma9/vcma9.h88
5 files changed, 171 insertions, 32 deletions
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index aa2ba6f04c..503654e296 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -45,7 +45,11 @@ extern int gunzip (void *, int, unsigned char *, int *);
extern int mem_test(unsigned long start, unsigned long ramsize, int quiet);
#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
#define IMAGE_SIZE 0x80000
+#elif defined(CONFIG_VCMA9)
+#define IMAGE_SIZE 0x40000 /* ugly, but it works for now */
+#endif
extern flash_info_t flash_info[]; /* info for FLASH chips */
diff --git a/board/mpl/vcma9/config.mk b/board/mpl/vcma9/config.mk
index 19ef18716f..95d69cc6cc 100644
--- a/board/mpl/vcma9/config.mk
+++ b/board/mpl/vcma9/config.mk
@@ -15,10 +15,10 @@
# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
# optionally with a ramdisk at 3080'0000
#
-# we load ourself to 33F0'0000
+# we load ourself to 33F8'0000
#
# download area is 3300'0000
#
-TEXT_BASE = 0x33F00000
+TEXT_BASE = 0x33F80000
diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/memsetup.S
index 80721cde27..557e554f53 100644
--- a/board/mpl/vcma9/memsetup.S
+++ b/board/mpl/vcma9/memsetup.S
@@ -54,8 +54,10 @@
/* BANK0CON */
#define B0_Tacs 0x0 /* 0clk */
-#define B0_Tcos 0x0 /* 0clk */
-#define B0_Tacc 0x5 /* 8clk */
+#define B0_Tcos 0x1 /* 1clk */
+/*#define B0_Tcos 0x0 0clk */
+#define B0_Tacc 0x7 /* 14clk */
+/*#define B0_Tacc 0x5 8clk */
#define B0_Tcoh 0x0 /* 0clk */
#define B0_Tah 0x0 /* 0clk */
#define B0_Tacp 0x0 /* page mode is not used */
@@ -63,8 +65,10 @@
/* BANK1CON */
#define B1_Tacs 0x0 /* 0clk */
-#define B1_Tcos 0x0 /* 0clk */
-#define B1_Tacc 0x5 /* 8clk */
+#define B1_Tcos 0x1 /* 1clk */
+/*#define B1_Tcos 0x0 0clk */
+#define B1_Tacc 0x7 /* 14clk */
+/*#define B1_Tacc 0x5 8clk */
#define B1_Tcoh 0x0 /* 0clk */
#define B1_Tah 0x0 /* 0clk */
#define B1_Tacp 0x0 /* page mode is not used */
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 4743e6bace..b051bfeb07 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -72,41 +72,46 @@ static inline void delay(unsigned long loops)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
/* to reduce PLL lock time, adjust the LOCKTIME register */
- rLOCKTIME = 0xFFFFFF;
+ clk_power->LOCKTIME = 0xFFFFFF;
/* configure MPLL */
- rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
delay (4000);
/* configure UPLL */
- rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
delay (8000);
/* set up the I/O ports */
- rGPACON = 0x007FFFFF;
- rGPBCON = 0x002AAAAA;
- rGPBUP = 0x000002BF;
- rGPCCON = 0xAAAAAAAA;
- rGPCUP = 0x0000FFFF;
- rGPDCON = 0xAAAAAAAA;
- rGPDUP = 0x0000FFFF;
- rGPECON = 0xAAAAAAAA;
- rGPEUP = 0x000037F7;
- rGPFCON = 0x00000000;
- rGPFUP = 0x00000000;
- rGPGCON = 0xFFEAFF5A;
- rGPGUP = 0x0000F0DC;
- rGPHCON = 0x0028AAAA;
- rGPHUP = 0x00000656;
+ gpio->GPACON = 0x007FFFFF;
+ gpio->GPBCON = 0x002AAAAA;
+ gpio->GPBUP = 0x000002BF;
+ gpio->GPCCON = 0xAAAAAAAA;
+ gpio->GPCUP = 0x0000FFFF;
+ gpio->GPDCON = 0xAAAAAAAA;
+ gpio->GPDUP = 0x0000FFFF;
+ gpio->GPECON = 0xAAAAAAAA;
+ gpio->GPEUP = 0x000037F7;
+ gpio->GPFCON = 0x00000000;
+ gpio->GPFUP = 0x00000000;
+ gpio->GPGCON = 0xFFEAFF5A;
+ gpio->GPGUP = 0x0000F0DC;
+ gpio->GPHCON = 0x0028AAAA;
+ gpio->GPHUP = 0x00000656;
/* setup correct IRQ modes for NIC */
- rEXTINT2 = (rEXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+ gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+
+ /* select USB port 2 to be host or device (fix to host for now) */
+ gpio->MISCCR |= 0x08;
/* init serial */
gd->baudrate = CONFIG_BAUDRATE;
@@ -136,6 +141,50 @@ int dram_init(void)
}
/*
+ * NAND flash initialization.
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+extern void
+nand_probe(ulong physadr);
+
+
+static inline void NF_Reset(void)
+{
+ int i;
+
+ NF_SetCE(NFCE_LOW);
+ NF_Cmd(0xFF); /* reset command */
+ for(i = 0; i < 10; i++); /* tWB = 100ns. */
+ NF_WaitRB(); /* wait 200~500us; */
+ NF_SetCE(NFCE_HIGH);
+}
+
+
+static inline void NF_Init(void)
+{
+#define TACLS 0
+#define TWRPH0 3
+#define TWRPH1 0
+ NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
+ //nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0);
+ // 1 1 1 1, 1 xxx, r xxx, r xxx
+ // En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1
+
+ NF_Reset();
+}
+
+void
+nand_init(void)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ NF_Init();
+ printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
+ nand_probe((ulong)nand);
+}
+#endif
+
+/*
* Get some Board/PLD Info
*/
@@ -195,12 +244,12 @@ int checkboard(void)
puts ("### No HW ID - assuming VCMA9");
} else {
b->serial_name[5] = 0;
- printf ("%s-%d Rev %c SN: %s", b->serial_name, Get_Board_Config(),
+ printf ("%s-%d PCB Rev %c SN: %s", b->serial_name, Get_Board_Config(),
Get_Board_PCB(), &b->serial_name[6]);
}
} else {
s[5] = 0;
- printf ("%s-%d Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(),
+ printf ("%s-%d PCB Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(),
&s[6]);
}
printf("\n");
@@ -211,7 +260,7 @@ int checkboard(void)
void print_vcma9_rev(void)
{
- printf("Board: VCMA9-%d Rev: %c (PLD Ver: %d, Rev: %d)\n",
+ printf("Board: VCMA9-%d PCB Rev: %c (PLD Ver: %d, Rev: %d)\n",
Get_Board_Config(), Get_Board_PCB(),
Get_PLD_Version(), Get_PLD_Revision());
}
@@ -245,5 +294,3 @@ void print_vcma9_info(void)
{
print_vcma9_rev();
}
-
-
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
index bc0e3a460d..4299d4e817 100644
--- a/board/mpl/vcma9/vcma9.h
+++ b/board/mpl/vcma9/vcma9.h
@@ -25,11 +25,97 @@
* Global routines used for VCMA9
*****************************************************************************/
+#include <s3c2410.h>
extern int mem_test(unsigned long start, unsigned long ramsize,int mode);
void print_vcma9_info(void);
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+typedef enum {
+ NFCE_LOW,
+ NFCE_HIGH
+} NFCE_STATE;
+
+static inline void NF_Conf(u16 conf)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ nand->NFCONF = conf;
+}
+
+static inline void NF_Cmd(u8 cmd)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ nand->NFCMD = cmd;
+}
+
+static inline void NF_CmdW(u8 cmd)
+{
+ NF_Cmd(cmd);
+ udelay(1);
+}
+
+static inline void NF_Addr(u8 addr)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ nand->NFADDR = addr;
+}
+
+static inline void NF_SetCE(NFCE_STATE s)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ switch (s) {
+ case NFCE_LOW:
+ nand->NFCONF &= ~(1<<11);
+ break;
+
+ case NFCE_HIGH:
+ nand->NFCONF |= (1<<11);
+ break;
+ }
+}
+
+static inline void NF_WaitRB(void)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ while (!(nand->NFSTAT & (1<<0)));
+}
+
+static inline void NF_Write(u8 data)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ nand->NFDATA = data;
+}
+
+static inline u8 NF_Read(void)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ return(nand->NFDATA);
+}
+
+static inline void NF_Init_ECC(void)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ nand->NFCONF |= (1<<12);
+}
+
+static inline u32 NF_Read_ECC(void)
+{
+ S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+ return(nand->NFECC);
+}
+
+#endif
+
#define PLD_BASE_ADDRESS 0x2C000100
#define PLD_ID_REG (PLD_BASE_ADDRESS + 0)
@@ -39,5 +125,3 @@ void print_vcma9_info(void);
#define PLD_GPCD_REG (PLD_BASE_ADDRESS + 4)
#define PLD_BOARD_REG (PLD_BASE_ADDRESS + 5)
-
-
generated by cgit (git 2.34.1) at 2024-11-11 18:14:56 +0000