diff options
Diffstat (limited to 'arch')
76 files changed, 13709 insertions, 287 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 54d65f8488..fb1e38de0c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -549,6 +549,7 @@ config TARGET_GPLUGD config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS + select SPL_DM_SPI if SPL imply CMD_SAVES help Support for TI's DaVinci platform. @@ -566,6 +567,8 @@ config ARCH_MVEBU select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select SPL_DM_SPI if SPL + select SPL_DM_SPI_FLASH if SPL select OF_CONTROL select OF_SEPARATE select SPI @@ -985,6 +988,8 @@ config ARCH_SOCFPGA imply FAT_WRITE imply SPL imply SPL_DM + imply SPL_DM_SPI + imply SPL_DM_SPI_FLASH imply SPL_LIBDISK_SUPPORT imply SPL_MMC_SUPPORT imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION @@ -1093,6 +1098,8 @@ config ARCH_ZYNQ select SPL_BOARD_INIT if SPL select SPL_CLK if SPL select SPL_DM if SPL + select SPL_DM_SPI if SPL + select SPL_DM_SPI_FLASH if SPL select SPL_OF_CONTROL if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL @@ -1131,6 +1138,8 @@ config ARCH_ZYNQMP select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL + select SPL_DM_SPI if SPI + select SPL_DM_SPI_FLASH if SPL_DM_SPI select SPL_DM_MAILBOX if SPL select SPL_FIRMWARE if SPL select SPL_SEPARATE_BSS if SPL @@ -1447,6 +1456,8 @@ config TARGET_LS1021AQDS select SUPPORT_SPL select SYS_FSL_DDR select FSL_DDR_INTERACTIVE + select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI + select SPI_FLASH_DATAFLASH if FSL_DSPI || FSL_QSPI imply SCSI config TARGET_LS1021ATWR @@ -1460,6 +1471,7 @@ config TARGET_LS1021ATWR select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP select SUPPORT_SPL + select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI imply SCSI config TARGET_LS1021ATSN @@ -1484,6 +1496,7 @@ config TARGET_LS1021AIOT select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL + select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI imply SCSI help Support for Freescale LS1021AIOT platform. @@ -1501,6 +1514,8 @@ config TARGET_LS1043AQDS select BOARD_LATE_INIT select SUPPORT_SPL select FSL_DDR_INTERACTIVE if !SPL + select FSL_DSPI if !SPL_NO_DSPI + select DM_SPI_FLASH if FSL_DSPI imply SCSI imply SCSI_AHCI help @@ -1515,6 +1530,8 @@ config TARGET_LS1043ARDB select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL + select FSL_DSPI if !SPL_NO_DSPI + select DM_SPI_FLASH if FSL_DSPI help Support for Freescale LS1043ARDB platform. @@ -1680,6 +1697,8 @@ config ARCH_ROCKCHIP select OF_CONTROL select SPI select SPL_DM if SPL + select SPL_DM_SPI if SPL + select SPL_DM_SPI_FLASH if SPL select SYS_MALLOC_F select SYS_THUMB_BUILD if !ARM64 imply ADC @@ -1930,5 +1949,3 @@ config SPL_LDSCRIPT default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 - - diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9900b44274..89fa448818 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -280,6 +280,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-mini-emmc1.dtb \ zynqmp-mini-nand.dtb \ zynqmp-mini-qspi.dtb \ + zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \ zynqmp-zcu100-revC.dtb \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \ @@ -848,6 +849,17 @@ dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \ omap3-igep0020.dtb +dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \ + omap4-panda.dtb \ + omap4-panda-es.dtb + +dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \ + omap4-sdp.dtb \ + omap4-sdp-es23plus.dtb + +dtb-$(CONFIG_TARGET_OMAP5_UEVM) += \ + omap5-uevm.dtb + dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \ at91-sama5d2_ptc_ek.dtb diff --git a/arch/arm/dts/elpida_ecb240abacn.dtsi b/arch/arm/dts/elpida_ecb240abacn.dtsi new file mode 100644 index 0000000000..d87ee4794f --- /dev/null +++ b/arch/arm/dts/elpida_ecb240abacn.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common devices used in different OMAP boards + */ + +/ { + elpida_ECB240ABACN: lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/dts/omap4-l4-abe.dtsi b/arch/arm/dts/omap4-l4-abe.dtsi new file mode 100644 index 0000000000..67b71ff542 --- /dev/null +++ b/arch/arm/dts/omap4-l4-abe.dtsi @@ -0,0 +1,488 @@ +&l4_abe { /* 0x40100000 */ + compatible = "ti,omap4-l4-abe", "simple-bus"; + reg = <0x40100000 0x400>, + <0x40100400 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ + <0x49000000 0x49000000 0x100000>; + segment@0 { /* 0x40100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = + /* CPU to L4 ABE mapping */ + <0x00000000 0x00000000 0x000400>, /* ap 0 */ + <0x00000400 0x00000400 0x000400>, /* ap 1 */ + <0x00022000 0x00022000 0x001000>, /* ap 2 */ + <0x00023000 0x00023000 0x001000>, /* ap 3 */ + <0x00024000 0x00024000 0x001000>, /* ap 4 */ + <0x00025000 0x00025000 0x001000>, /* ap 5 */ + <0x00026000 0x00026000 0x001000>, /* ap 6 */ + <0x00027000 0x00027000 0x001000>, /* ap 7 */ + <0x00028000 0x00028000 0x001000>, /* ap 8 */ + <0x00029000 0x00029000 0x001000>, /* ap 9 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 10 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 11 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 12 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 13 */ + <0x00030000 0x00030000 0x001000>, /* ap 14 */ + <0x00031000 0x00031000 0x001000>, /* ap 15 */ + <0x00032000 0x00032000 0x001000>, /* ap 16 */ + <0x00033000 0x00033000 0x001000>, /* ap 17 */ + <0x00038000 0x00038000 0x001000>, /* ap 18 */ + <0x00039000 0x00039000 0x001000>, /* ap 19 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 20 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 21 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 22 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 23 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 24 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 25 */ + <0x00080000 0x00080000 0x010000>, /* ap 26 */ + <0x00080000 0x00080000 0x001000>, /* ap 27 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 28 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 29 */ + <0x000c0000 0x000c0000 0x010000>, /* ap 30 */ + <0x000c0000 0x000c0000 0x001000>, /* ap 31 */ + <0x000f1000 0x000f1000 0x001000>, /* ap 32 */ + <0x000f2000 0x000f2000 0x001000>, /* ap 33 */ + + /* L3 to L4 ABE mapping */ + <0x49000000 0x49000000 0x000400>, /* ap 0 */ + <0x49000400 0x49000400 0x000400>, /* ap 1 */ + <0x49022000 0x49022000 0x001000>, /* ap 2 */ + <0x49023000 0x49023000 0x001000>, /* ap 3 */ + <0x49024000 0x49024000 0x001000>, /* ap 4 */ + <0x49025000 0x49025000 0x001000>, /* ap 5 */ + <0x49026000 0x49026000 0x001000>, /* ap 6 */ + <0x49027000 0x49027000 0x001000>, /* ap 7 */ + <0x49028000 0x49028000 0x001000>, /* ap 8 */ + <0x49029000 0x49029000 0x001000>, /* ap 9 */ + <0x4902a000 0x4902a000 0x001000>, /* ap 10 */ + <0x4902b000 0x4902b000 0x001000>, /* ap 11 */ + <0x4902e000 0x4902e000 0x001000>, /* ap 12 */ + <0x4902f000 0x4902f000 0x001000>, /* ap 13 */ + <0x49030000 0x49030000 0x001000>, /* ap 14 */ + <0x49031000 0x49031000 0x001000>, /* ap 15 */ + <0x49032000 0x49032000 0x001000>, /* ap 16 */ + <0x49033000 0x49033000 0x001000>, /* ap 17 */ + <0x49038000 0x49038000 0x001000>, /* ap 18 */ + <0x49039000 0x49039000 0x001000>, /* ap 19 */ + <0x4903a000 0x4903a000 0x001000>, /* ap 20 */ + <0x4903b000 0x4903b000 0x001000>, /* ap 21 */ + <0x4903c000 0x4903c000 0x001000>, /* ap 22 */ + <0x4903d000 0x4903d000 0x001000>, /* ap 23 */ + <0x4903e000 0x4903e000 0x001000>, /* ap 24 */ + <0x4903f000 0x4903f000 0x001000>, /* ap 25 */ + <0x49080000 0x49080000 0x010000>, /* ap 26 */ + <0x49080000 0x49080000 0x001000>, /* ap 27 */ + <0x490a0000 0x490a0000 0x010000>, /* ap 28 */ + <0x490a0000 0x490a0000 0x001000>, /* ap 29 */ + <0x490c0000 0x490c0000 0x010000>, /* ap 30 */ + <0x490c0000 0x490c0000 0x001000>, /* ap 31 */ + <0x490f1000 0x490f1000 0x001000>, /* ap 32 */ + <0x490f2000 0x490f2000 0x001000>; /* ap 33 */ + + target-module@22000 { /* 0x40122000, ap 2 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2208c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>, + <0x49022000 0x49022000 0x1000>; + + mcbsp1: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x40124000, ap 4 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2408c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>, + <0x49024000 0x49024000 0x1000>; + + mcbsp2: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x40126000, ap 6 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>, + <0x49026000 0x49026000 0x1000>; + + mcbsp3: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x40128000, ap 8 08.0 */ + compatible = "ti,sysc-mcasp", "ti,sysc"; + reg = <0x28000 0x4>, + <0x28004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>, + <0x49028000 0x49028000 0x1000>; + + /* + * Child device unsupported by davinci-mcasp. At least + * RX path is disabled for omap4, and only DIT mode + * works with no I2S. See also old Android kernel + * omap-mcasp driver for more information. + */ + }; + + target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>, + <0x4902a000 0x4902a000 0x1000>; + }; + + target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>, + <0x4902e000 0x4902e000 0x1000>; + + dmic: dmic@0 { + compatible = "ti,omap4-dmic"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 67>; + dma-names = "up_link"; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x40130000, ap 14 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x30000 0x4>, + <0x30010 0x4>, + <0x30014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>, + <0x49030000 0x49030000 0x1000>; + + wdt3: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>, + <0x49032000 0x49032000 0x1000>; + + /* Must be only enabled for boards with pdmclk wired */ + status = "disabled"; + + mcpdm: mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; + }; + }; + + target-module@38000 { /* 0x40138000, ap 18 12.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x38000 0x4>, + <0x38010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>, + <0x49038000 0x49038000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x49038000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>, + <0x4903a000 0x4903a000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903a000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>, + <0x4903c000 0x4903c000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903c000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>, + <0x4903e000 0x4903e000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903e000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,timer-dsp; + }; + }; + + target-module@80000 { /* 0x40180000, ap 26 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>, + <0x49080000 0x49080000 0x10000>; + }; + + target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>, + <0x490a0000 0x490a0000 0x10000>; + }; + + target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x10000>, + <0x490c0000 0x490c0000 0x10000>; + }; + + target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf1000 0x1000>, + <0x490f1000 0x490f1000 0x1000>; + + /* + * No child device binding or driver in mainline. + * See Android tree and related upstreaming efforts + * for the old driver. + */ + }; + }; +}; diff --git a/arch/arm/dts/omap4-l4.dtsi b/arch/arm/dts/omap4-l4.dtsi new file mode 100644 index 0000000000..424a694660 --- /dev/null +++ b/arch/arm/dts/omap4-l4.dtsi @@ -0,0 +1,2473 @@ +// SPDX-License-Identifier: GPL-2.0 +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap4-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x004000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 23 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 24 */ + <0x00066000 0x00066000 0x001000>, /* ap 25 */ + <0x00067000 0x00067000 0x001000>, /* ap 26 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 80 */ + <0x00060000 0x00060000 0x001000>, /* ap 81 */ + <0x00064000 0x00064000 0x001000>, /* ap 86 */ + <0x00065000 0x00065000 0x001000>; /* ap 87 */ + + target-module@2000 { /* 0x4a002000, ap 3 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_core"; + reg = <0x2000 0x4>, + <0x2010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + omap4_scm_core: scm@0 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + + omap_control_usb2phy: control-phy@300 { + compatible = "ti,control-phy-usb2"; + reg = <0x300 0x4>; + reg-names = "power"; + }; + + omap_control_usbotg: control-phy@33c { + compatible = "ti,control-phy-otghs"; + reg = <0x33c 0x4>; + reg-names = "otghs_control"; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 02.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm1: cm1@0 { + compatible = "ti,omap4-cm1", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm1_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 23 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm2: cm2@0 { + compatible = "ti,omap4-cm2", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm2_clockdomains: clockdomains { + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */ + clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000 0x4>, + <0x58010 0x4>, + <0x58014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x5000>; + + hsi: hsi@0 { + compatible = "ti,omap4-hsi"; + reg = <0x0 0x4000>, + <0x5000 0x1000>; + reg-names = "sys", "gdd"; + + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "hsi_fck"; + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x4000>; + + hsi_port1: hsi-port@2000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x2000 0x800>, + <0x2800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + + hsi_port2: hsi-port@3000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x3000 0x800>, + <0x3800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 86 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>, + <0x64014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 25 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_tesla 1>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + mmu_dsp: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + }; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 27 */ + <0x00075000 0x000f5000 0x001000>, /* ap 28 */ + <0x00076000 0x000f6000 0x001000>, /* ap 29 */ + <0x00077000 0x000f7000 0x001000>, /* ap 30 */ + <0x00036000 0x000b6000 0x001000>, /* ap 69 */ + <0x00037000 0x000b7000 0x001000>, /* ap 70 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 78 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 79 */ + <0x00029000 0x000a9000 0x001000>, /* ap 82 */ + <0x0002a000 0x000aa000 0x001000>, /* ap 83 */ + <0x0002b000 0x000ab000 0x001000>, /* ap 84 */ + <0x0002c000 0x000ac000 0x001000>, /* ap 85 */ + <0x0002d000 0x000ad000 0x001000>, /* ap 88 */ + <0x0002e000 0x000ae000 0x001000>; /* ap 89 */ + + target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x29000 0x1000>; + }; + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2b000 0x1000>; + + usb_otg_hs: usb_otg_hs@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc", "dma"; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ctrl-module = <&omap_control_usbotg>; + }; + }; + + target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2d000 0x4>, + <0x2d010 0x4>, + <0x2d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2d000 0x1000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + reg = <0x0 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + usb2_phy: usb2phy@80 { + compatible = "ti,omap-usb2"; + reg = <0x80 0x58>; + ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; + #phy-cells = <0>; + }; + }; + }; + + /* d2d mdm */ + target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x36000 0x4>, + <0x36010 0x4>, + <0x36014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */ + clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + /* d2d mpu */ + target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4d000 0x4>, + <0x4d010 0x4>, + <0x4d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */ + clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + reg = <0x59038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + smartreflex_mpu: smartreflex@0 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + reg = <0x5b038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + smartreflex_iva: smartreflex@0 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + reg = <0x5d038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ + <0x00001000 0x00101000 0x001000>, /* ap 22 */ + <0x00002000 0x00102000 0x001000>, /* ap 61 */ + <0x00003000 0x00103000 0x001000>, /* ap 62 */ + <0x00008000 0x00108000 0x001000>, /* ap 63 */ + <0x00009000 0x00109000 0x001000>, /* ap 64 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 65 */ + <0x0000b000 0x0010b000 0x001000>; /* ap 66 */ + + target-module@0 { /* 0x4a100000, ap 21 2a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_core"; + reg = <0x0 0x4>, + <0x10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0x170>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap4", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + }; + + target-module@2000 { /* 0x4a102000, ap 61 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 63 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 65 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>, + <0xa010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-delay-us = <2>; + /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */ + clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 32 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 33 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00006000 0x00206000 0x001000>, /* ap 37 */ + <0x00007000 0x00207000 0x001000>, /* ap 38 */ + <0x00012000 0x00212000 0x001000>, /* ap 39 */ + <0x00013000 0x00213000 0x001000>, /* ap 40 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 41 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 42 */ + <0x00010000 0x00210000 0x001000>, /* ap 43 */ + <0x00011000 0x00211000 0x001000>, /* ap 44 */ + <0x00016000 0x00216000 0x001000>, /* ap 45 */ + <0x00017000 0x00217000 0x001000>, /* ap 46 */ + <0x00014000 0x00214000 0x001000>, /* ap 47 */ + <0x00015000 0x00215000 0x001000>, /* ap 48 */ + <0x00018000 0x00218000 0x001000>, /* ap 49 */ + <0x00019000 0x00219000 0x001000>, /* ap 50 */ + <0x00020000 0x00220000 0x001000>, /* ap 51 */ + <0x00021000 0x00221000 0x001000>, /* ap 52 */ + <0x00026000 0x00226000 0x001000>, /* ap 53 */ + <0x00027000 0x00227000 0x001000>, /* ap 54 */ + <0x00028000 0x00228000 0x001000>, /* ap 55 */ + <0x00029000 0x00229000 0x001000>, /* ap 56 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 57 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 58 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 59 */ + <0x0001d000 0x0021d000 0x001000>; /* ap 60 */ + + target-module@4000 { /* 0x4a204000, ap 35 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 37 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 41 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 43 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 39 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 47 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 45 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 49 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 51 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 53 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 55 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>; /* ap 91 */ + + l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00020000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; + }; + }; +}; + +&l4_wkup { /* 0x4a300000 */ + compatible = "ti,omap4-l4-wkup", "simple-bus"; + reg = <0x4a300000 0x800>, + <0x4a300800 0x800>, + <0x4a301000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */ + <0x00010000 0x4a310000 0x010000>, /* segment 1 */ + <0x00020000 0x4a320000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4a304000, ap 17 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x20>; + }; + }; + + target-module@6000 { /* 0x4a306000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap4-prm", "simple-bus"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4a30a000, ap 15 34.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap4-scrm"; + reg = <0x0 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_wkup"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap4_scm_wkup: scm@c000 { + compatible = "ti,omap4-scm-wkup"; + reg = <0xc000 0x1000>; + }; + }; + }; + + segment@10000 { /* 0x4a310000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>, /* ap 12 */ + <0x0000e000 0x0001e000 0x001000>, /* ap 21 */ + <0x0000f000 0x0001f000 0x001000>; /* ap 22 */ + + gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4a314000, ap 7 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>, + <0x8014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4a31c000, ap 11 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xc000 0x4>, + <0xc010 0x4>, + <0xc014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + reg-names = "mpu"; + }; + }; + + target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_wkup"; + reg = <0xe000 0x4>, + <0xe010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + + omap4_pmx_wkup: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + }; + }; + + segment@20000 { /* 0x4a320000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 23 */ + <0x00001000 0x00021000 0x001000>, /* ap 24 */ + <0x00002000 0x00022000 0x001000>, /* ap 25 */ + <0x00003000 0x00023000 0x001000>, /* ap 26 */ + <0x00004000 0x00024000 0x001000>, /* ap 27 */ + <0x00005000 0x00025000 0x001000>, /* ap 28 */ + <0x00007000 0x00027000 0x000400>, /* ap 29 */ + <0x00008000 0x00028000 0x000800>, /* ap 30 */ + <0x00009000 0x00029000 0x000400>; /* ap 31 */ + + target-module@0 { /* 0x4a320000, ap 23 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4a322000, ap 25 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a324000, ap 27 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a326000, ap 13 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00003000 0x00009000 0x00000400>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00040000 0x00040000 0x010000>, /* ap 13 */ + <0x00050000 0x00050000 0x001000>, /* ap 14 */ + <0x00055000 0x00055000 0x001000>, /* ap 15 */ + <0x00056000 0x00056000 0x001000>, /* ap 16 */ + <0x00057000 0x00057000 0x001000>, /* ap 17 */ + <0x00058000 0x00058000 0x001000>, /* ap 18 */ + <0x00059000 0x00059000 0x001000>, /* ap 19 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 20 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 21 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 22 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 23 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 24 */ + <0x00060000 0x00060000 0x001000>, /* ap 25 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 26 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 27 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 28 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 29 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 30 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 31 */ + <0x00070000 0x00070000 0x001000>, /* ap 32 */ + <0x00071000 0x00071000 0x001000>, /* ap 33 */ + <0x00072000 0x00072000 0x001000>, /* ap 34 */ + <0x00073000 0x00073000 0x001000>, /* ap 35 */ + <0x00061000 0x00061000 0x001000>, /* ap 36 */ + <0x00096000 0x00096000 0x001000>, /* ap 37 */ + <0x00097000 0x00097000 0x001000>, /* ap 38 */ + <0x00076000 0x00076000 0x001000>, /* ap 39 */ + <0x00077000 0x00077000 0x001000>, /* ap 40 */ + <0x00078000 0x00078000 0x001000>, /* ap 41 */ + <0x00079000 0x00079000 0x001000>, /* ap 42 */ + <0x00086000 0x00086000 0x001000>, /* ap 43 */ + <0x00087000 0x00087000 0x001000>, /* ap 44 */ + <0x00088000 0x00088000 0x001000>, /* ap 45 */ + <0x00089000 0x00089000 0x001000>, /* ap 46 */ + <0x000b0000 0x000b0000 0x001000>, /* ap 47 */ + <0x000b1000 0x000b1000 0x001000>, /* ap 48 */ + <0x00098000 0x00098000 0x001000>, /* ap 49 */ + <0x00099000 0x00099000 0x001000>, /* ap 50 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 51 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 52 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 53 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 54 */ + <0x0009e000 0x0009e000 0x001000>, /* ap 55 */ + <0x0009f000 0x0009f000 0x001000>, /* ap 56 */ + <0x00090000 0x00090000 0x002000>, /* ap 57 */ + <0x00092000 0x00092000 0x001000>, /* ap 58 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 59 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 60 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 61 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 62 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 63 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 64 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 65 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 66 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 67 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 68 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 69 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 70 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 71 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 72 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 73 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 74 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 75 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 76 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 79 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 80 */ + <0x00001400 0x00001400 0x000400>, /* ap 81 */ + <0x00001800 0x00001800 0x000400>, /* ap 82 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 83 */ + <0x000a5000 0x000a5000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 02.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x32000 0x4>, + <0x32010 0x4>, + <0x32014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 04.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 0e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + /* Unused DSS L4 access, see L3 instead */ + target-module@40000 { /* 0x48040000, ap 13 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + + target-module@55000 { /* 0x48055000, ap 15 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 19 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 25 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 32 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 34 30.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@76000 { /* 0x48076000, ap 39 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x76000 0x4>, + <0x76010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + + target-module@78000 { /* 0x48078000, ap 41 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x78000 0x4>, + <0x78010 0x4>, + <0x78014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@86000 { /* 0x48086000, ap 43 24.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x86000 0x4>, + <0x86010 0x4>, + <0x86014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 45 2e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + rng_target: target-module@90000 { /* 0x48090000, ap 57 2a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x91fe0 0x4>, + <0x91fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@96000 { /* 0x48096000, ap 37 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x9608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x96000 0x1000>; + + mcbsp4: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@98000 { /* 0x48098000, ap 49 22.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@9e000 { /* 0x4809e000, ap 55 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9e000 0x1000>; + }; + + target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 59 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + des_target: target-module@a5000 { /* 0x480a5000 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xa5030 0x4>, + <0xa5034 0x4>, + <0xa5038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa5000 0x00001000>; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + }; + }; + + target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b0000 { /* 0x480b0000, ap 47 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb0000 0x1000>; + }; + + target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xb2000 0x4>, + <0xb2014 0x4>, + <0xb2018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + + hdqw1w: 1w@0 { + compatible = "ti,omap3-1w"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ + <0x00151000 0x00351000 0x001000>; /* ap 78 */ + + target-module@150000 { /* 0x48350000, ap 77 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x150000 0x8>, + <0x150010 0x8>, + <0x150090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x150000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; diff --git a/arch/arm/dts/omap4-mcpdm.dtsi b/arch/arm/dts/omap4-mcpdm.dtsi new file mode 100644 index 0000000000..915a9b31a3 --- /dev/null +++ b/arch/arm/dts/omap4-mcpdm.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common omap4 mcpdm configuration + * + * Only include this file if your board has pdmclk wired from the + * pmic to ABE as mcpdm uses an external clock for the module. + */ + +&omap4_pmx_core { + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) + + /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a10010e abe_clks.abe_clks ah26 */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; +}; + +&mcpdm_module { + /* + * McPDM pads must be muxed at the interconnect target module + * level as the module on the SoC needs external clock from + * the PMIC + */ + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcpdm { + clocks = <&twl6040>; + clock-names = "pdmclk"; +}; diff --git a/arch/arm/dts/omap4-panda-common.dtsi b/arch/arm/dts/omap4-panda-common.dtsi new file mode 100644 index 0000000000..55ea8b6189 --- /dev/null +++ b/arch/arm/dts/omap4-panda-common.dtsi @@ -0,0 +1,573 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ + */ +#include <dt-bindings/input/input.h> +#include "elpida_ecb240abacn.dtsi" +#include "omap4-mcpdm.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &dvi0; + display1 = &hdmi0; + ethernet = ðernet; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = < + &led_wkgpio_pins + >; + + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = < + &button_pins + >; + + buttonS2 { + label = "button S2"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; + + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */ + startup-delay-us = <70000>; + enable-active-high; + /* + * boot-on is required along with always-on as the + * regulator framework doesn't enable the regulator + * if boot-on is not there. + */ + regulator-always-on; + regulator-boot-on; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; + vcc-supply = <&hsusb1_power>; + clocks = <&auxclk3_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + tfp410: encoder0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + tpd12s015: encoder1 { + compatible = "ti,tpd12s015"; + + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ + <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ + <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector1 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins + &tfp410_pins + &dss_hdmi_pins + &tpd12s015_pins + &hsusbb1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ + + OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ + + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ + >; + }; + + tfp410_pins: pinmux_tfp410_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + >; + }; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + /* + * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP + * REVISIT: Are the pull-ups needed for GPIO 48 and 49? + */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ + >; + }; +}; + +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* IRQ# = 7 */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + #clock-cells = <0>; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + /* IRQ# = 119 */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x10e>; + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + /* gpio_53 with gpmc_ncs3 pad as wakeup */ + interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>, + <&omap4_pmx_core 0x3a>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <38400000>; + }; +}; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&uart2 { + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; + +&dss { + status = "ok"; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "ok"; + vdd-supply = <&vcxio>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/dts/omap4-panda-es.dts b/arch/arm/dts/omap4-panda-es.dts new file mode 100644 index 0000000000..9dd307b526 --- /dev/null +++ b/arch/arm/dts/omap4-panda-es.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ +/dts-v1/; + +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio_keys { + buttonS2 { + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ + }; +}; + +&gpio1_target { + ti,no-reset-on-init; +}; diff --git a/arch/arm/dts/omap4-panda.dts b/arch/arm/dts/omap4-panda.dts new file mode 100644 index 0000000000..fb2f47717b --- /dev/null +++ b/arch/arm/dts/omap4-panda.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + */ +/dts-v1/; + +#include "omap443x.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; +}; diff --git a/arch/arm/dts/omap4-sdp-es23plus.dts b/arch/arm/dts/omap4-sdp-es23plus.dts new file mode 100644 index 0000000000..42154520d3 --- /dev/null +++ b/arch/arm/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ +#include "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; diff --git a/arch/arm/dts/omap4-sdp.dts b/arch/arm/dts/omap4-sdp.dts new file mode 100644 index 0000000000..91480ac1f3 --- /dev/null +++ b/arch/arm/dts/omap4-sdp.dts @@ -0,0 +1,713 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + */ +/dts-v1/; + +#include "omap443x.dtsi" +#include "elpida_ecb240abacn.dtsi" +#include "omap4-mcpdm.dtsi" + +/ { + model = "TI OMAP4 SDP board"; + compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + aliases { + display0 = &lcd0; + display1 = &lcd1; + display2 = &hdmi0; + }; + + vdd_eth: fixedregulator-vdd-eth { + pinctrl-names = "default"; + pinctrl-0 = <&enet_enable_gpio>; + + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ + enable-active-high; + regulator-boot-on; + startup-delay-us = <25000>; + }; + + vbat: fixedregulator-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3750000>; + regulator-max-microvolt = <3750000>; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + debug0 { + label = "omap4:green:debug0"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ + }; + + debug1 { + label = "omap4:green:debug1"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ + }; + + debug2 { + label = "omap4:green:debug2"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ + }; + + debug3 { + label = "omap4:green:debug3"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ + }; + + debug4 { + label = "omap4:green:debug4"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ + }; + + user1 { + label = "omap4:blue:user"; + gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ + }; + + user2 { + label = "omap4:red:user"; + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ + }; + + user3 { + label = "omap4:green:user"; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ + }; + }; + + pwmleds { + compatible = "pwm-leds"; + kpad { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + charging { + label = "omap4:green:chrg"; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&twl_pwm 1 7812500>; + brightness-levels = < + 0 10 20 30 40 + 50 60 70 80 90 + 100 110 120 127 + >; + default-brightness-level = <13>; + }; + + sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; + }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ + <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ + <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "c"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &dss_hdmi_pins + &tpd12s015_pins + >; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ + >; + }; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ + OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ + OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ + OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + /* wl12xx GPIO output for WLAN_EN */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + /* gpio_48 for ENET_ENABLE */ + enet_enable_gpio: pinmux_enet_enable_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ + >; + }; + + ks8851_pins: pinmux_ks8851_pins { + pinctrl-single,pins = < + /* ENET_INT */ + OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ + /* + * Misterious pin which makes the ethernet working + * The legacy board file requested this pin on boot + * (ETH_KS8851_QUART) and set it to high, similarly to + * the ENET_ENABLE pin. + * We could use gpio-hog to keep it high, but let's use + * it as a reset GPIO for ks8851. + */ + OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + #clock-cells = <0>; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + }; + + /* + * Ambient Light Sensor + * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf + */ + bh1780@29 { + compatible = "rohm,bh1780"; + reg = <0x29>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; + + /* + * 3-Axis Digital Compass + * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf + */ + hmc5843@1e { + compatible = "honeywell,hmc5843"; + reg = <0x1e>; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + eth@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_pins>; + + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ + vdd-supply = <&vdd_eth>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <8>; +}; + +&mmc2 { + vmmc-supply = <&vaux1>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1281"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; + +&uart2 { + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; +}; + +&dmic { + pinctrl-names = "default"; + pinctrl-0 = <&dmic_pins>; + status = "okay"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&dss { + status = "ok"; +}; + +&dsi1 { + status = "ok"; + vdd-supply = <&vcxio>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: display { + compatible = "tpo,taal", "panel-dsi-cm"; + label = "lcd0"; + + reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; + +&dsi2 { + status = "ok"; + vdd-supply = <&vcxio>; + + port { + dsi2_out_ep: endpoint { + remote-endpoint = <&lcd1_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd1: display { + compatible = "tpo,taal", "panel-dsi-cm"; + label = "lcd1"; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + + port { + lcd1_in: endpoint { + remote-endpoint = <&dsi2_out_ep>; + }; + }; + }; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/dts/omap4-u-boot.dtsi b/arch/arm/dts/omap4-u-boot.dtsi new file mode 100644 index 0000000000..4a6bafd6ed --- /dev/null +++ b/arch/arm/dts/omap4-u-boot.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * U-Boot additions + * + * (C) Copyright 2020 Tero Kristo <t-kristo@ti.com> + */ + +&l4_cfg { + segment@0 { + /* SCM Core */ + target-module@2000 { + compatible = "simple-bus"; + }; + + /* USB HS */ + target-module@64000 { + compatible = "simple-bus"; + }; + }; +}; + +&l4_per { + segment@0 { + /* UART3 */ + target-module@20000 { + compatible = "simple-bus"; + }; + + /* I2C1 */ + target-module@70000 { + compatible = "simple-bus"; + }; + + /* MMC1 */ + target-module@9c000 { + compatible = "simple-bus"; + }; + }; +}; diff --git a/arch/arm/dts/omap4.dtsi b/arch/arm/dts/omap4.dtsi new file mode 100644 index 0000000000..763bdea8c8 --- /dev/null +++ b/arch/arm/dts/omap4.dtsi @@ -0,0 +1,657 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/omap4.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/clock/omap4.h> + +/ { + compatible = "ti,omap4430", "ti,omap4"; + interrupt-parent = <&wakeupgen>; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&L2>; + reg = <0x0>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&L2>; + reg = <0x1>; + }; + }; + + /* + * Note that 4430 needs cross trigger interface (CTI) supported + * before we can configure the interrupts. This means sampling + * events are not supported for pmu. Note that 4460 does not use + * CTI, see also 4460.dtsi. + */ + pmu { + compatible = "arm,cortex-a9-pmu"; + ti,hwmods = "debugss"; + }; + + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + interrupt-parent = <&gic>; + }; + + L2: l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@48240600 { + compatible = "arm,cortex-a9-twd-timer"; + clocks = <&mpu_periphclk>; + reg = <0x48240600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap4-mpu"; + ti,hwmods = "mpu"; + sram = <&ocmcram>; + }; + + dsp { + compatible = "ti,omap3-c64"; + }; + + iva { + compatible = "ti,ivahd"; + ti,hwmods = "iva"; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP4 interconnect. + * The real OMAP interconnect network is quite complex. + * Since it will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l4_wkup: interconnect@4a300000 { + }; + + l4_cfg: interconnect@4a000000 { + }; + + l4_per: interconnect@48000000 { + }; + + l4_abe: interconnect@40100000 { + }; + + ocmcram: sram@40304000 { + compatible = "mmio-sram"; + reg = <0x40304000 0xa000>; /* 40k */ + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + ti,no-idle-on-init; + clocks = <&l3_div_ck>; + clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + target-module@52000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "iss"; + reg = <0x52000000 0x4>, + <0x52000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-delay-us = <2>; + clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x52000000 0x1000000>; + + /* No child device binding, driver in staging */ + }; + + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + ranges = <0x0 0x55082000 0x100>; + #size-cells = <1>; + #address-cells = <1>; + + mmu_ipu: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; + }; + + target-module@4012c000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4012c000 0x4>, + <0x4012c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */ + <0x4902c000 0x4902c000 0x1000>; /* L3 */ + + /* No child device binding or driver in mainline */ + }; + + dmm@4e000000 { + compatible = "ti,omap4-dmm"; + reg = <0x4e000000 0x800>; + interrupts = <0 113 0x4>; + ti,hwmods = "dmm"; + }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d"; + reg = <0x4c000000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "emif1"; + ti,no-idle-on-init; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d"; + reg = <0x4d000000 0x100>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "emif2"; + ti,no-idle-on-init; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + aes1_target: target-module@4b501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b501080 0x4>, + <0x4b501084 0x4>, + <0x4b501088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b501000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 111>, <&sdma 110>; + dma-names = "tx", "rx"; + }; + }; + + aes2_target: target-module@4b701000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b701080 0x4>, + <0x4b701084 0x4>, + <0x4b701088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b701000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 114>, <&sdma 113>; + dma-names = "tx", "rx"; + }; + }; + + sham_target: target-module@4b100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x4b100100 0x4>, + <0x4b100110 0x4>, + <0x4b100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap4-sham"; + reg = <0 0x300>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 119>; + dma-names = "rx"; + }; + }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + ti,tranxdone-status-mask = <0x80>; + clocks = <&sys_clkin_ck>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + status = "disabled"; + }; + + abb_iva: regulator-abb-iva { + compatible = "ti,abb-v2"; + regulator-name = "abb_iva"; + #address-cells = <0>; + #size-cells = <0>; + ti,tranxdone-status-mask = <0x80000000>; + clocks = <&sys_clkin_ck>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + status = "disabled"; + }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; + + /* + * DSS is only using l3 mapping without l4 as noted in the TRM + * "10.1.3 DSS Register Manual" for omap4460. + */ + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x58000000 0x1000000>; + + dss: dss@0 { + compatible = "ti,omap4-dss"; + reg = <0 0x80>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap4-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; + clock-names = "fck", "ick"; + }; + }; + + target-module@3000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x3000 0x4>; + reg-names = "rev"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x3000 0x1000>; + + venc: encoder@0 { + compatible = "ti,omap4-venc"; + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck"; + }; + }; + + target-module@4000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@6000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>, + <0x6010 0x4>; + reg-names = "rev", "sysc"; + /* + * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP + * but HDMI audio will fail with them. + */ + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x2000>; + + hdmi: encoder@0 { + compatible = "ti,omap4-hdmi"; + reg = <0 0x200>, + <0x200 0x100>, + <0x300 0x100>, + <0x400 0x1000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; + }; + }; + }; +}; + +#include "omap4-l4.dtsi" +#include "omap4-l4-abe.dtsi" +#include "omap44xx-clocks.dtsi" + +&prm { + prm_tesla: prm@400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_ivahd: prm@f00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1b00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/dts/omap443x-clocks.dtsi b/arch/arm/dts/omap443x-clocks.dtsi new file mode 100644 index 0000000000..39297868ec --- /dev/null +++ b/arch/arm/dts/omap443x-clocks.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for OMAP4 clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + */ +&prm_clocks { + bandgap_fclk: bandgap_fclk@1888 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x1888>; + }; +}; diff --git a/arch/arm/dts/omap443x.dtsi b/arch/arm/dts/omap443x.dtsi new file mode 100644 index 0000000000..cbcdcb4e7d --- /dev/null +++ b/arch/arm/dts/omap443x.dtsi @@ -0,0 +1,76 @@ +/* + * Device Tree Source for OMAP443x SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "omap4.dtsi" + +/ { + cpus { + cpu0: cpu@0 { + /* OMAP443x variants OPP50-OPPNT */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + >; + clock-latency = <300000>; /* From legacy driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + thermal-zones { + #include "omap4-cpu-thermal.dtsi" + }; + + ocp { + bandgap: bandgap@4a002260 { + reg = <0x4a002260 0x4 + 0x4a00232C 0x4>; + compatible = "ti,omap4430-bandgap"; + + #thermal-sensor-cells = <0>; + }; + }; + + ocp { + abb_mpu: regulator-abb-mpu { + status = "okay"; + + reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>; + reg-names = "base-address", "int-address"; + + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0 0 0 0 + 1200000 0 0 0 0 0 + 1313000 0 0 0 0 0 + 1375000 1 0 0 0 0 + 1389000 1 0 0 0 0 + >; + }; + + /* Default unused, just provide register info for record */ + abb_iva: regulator-abb-iva { + reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>; + reg-names = "base-address", "int-address"; + }; + + }; + +}; + +&cpu_thermal { + coefficients = <0 20000>; +}; + +/include/ "omap443x-clocks.dtsi" diff --git a/arch/arm/dts/omap4460.dtsi b/arch/arm/dts/omap4460.dtsi new file mode 100644 index 0000000000..2223dc0d63 --- /dev/null +++ b/arch/arm/dts/omap4460.dtsi @@ -0,0 +1,131 @@ +/* + * Device Tree Source for OMAP4460 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#include "omap4.dtsi" + +/ { + cpus { + /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ + cpu0: cpu@0 { + operating-points = < + /* kHz uV */ + 350000 1025000 + 700000 1200000 + 920000 1313000 + >; + clock-latency = <300000>; /* From legacy driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "debugss"; + }; + + thermal-zones { + #include "omap4-cpu-thermal.dtsi" + }; + + ocp { + bandgap: bandgap@4a002260 { + reg = <0x4a002260 0x4 + 0x4a00232C 0x4 + 0x4a002378 0x18>; + compatible = "ti,omap4460-bandgap"; + interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */ + + #thermal-sensor-cells = <0>; + }; + + abb_mpu: regulator-abb-mpu { + status = "okay"; + + reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, + <0x4A002268 0x4>; + reg-names = "base-address", "int-address", + "efuse-address"; + + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0 0 0 0 + 1200000 0 0 0 0 0 + 1313000 0 0 0x100000 0x40000 0 + 1375000 1 0 0 0 0 + 1389000 1 0 0 0 0 + >; + }; + + abb_iva: regulator-abb-iva { + status = "okay"; + + reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>, + <0x4A002268 0x4>; + reg-names = "base-address", "int-address", + "efuse-address"; + + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 950000 0 0 0 0 0 + 1140000 0 0 0 0 0 + 1291000 0 0 0x200000 0 0 + 1375000 1 0 0 0 0 + 1376000 1 0 0 0 0 + >; + }; + }; + +}; + +&cpu_thermal { + coefficients = <348 (-9301)>; +}; + +/* Only some L4 CFG interconnect ranges are different on 4460 */ +&l4_cfg_segment_300000 { + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>, /* ap 91 */ + <0x00010000 0x00310000 0x008000>, /* ap 92 */ + <0x00018000 0x00318000 0x004000>, /* ap 93 */ + <0x0001c000 0x0031c000 0x002000>, /* ap 94 */ + <0x0001e000 0x0031e000 0x002000>; /* ap 95 */ +}; + +&l4_cfg_target_0 { + ranges = <0x00000000 0x00000000 0x00010000>, + <0x00010000 0x00010000 0x00008000>, + <0x00018000 0x00018000 0x00004000>, + <0x0001c000 0x0001c000 0x00002000>, + <0x0001e000 0x0001e000 0x00002000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; +}; + +/include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/dts/omap446x-clocks.dtsi b/arch/arm/dts/omap446x-clocks.dtsi new file mode 100644 index 0000000000..0f41714cff --- /dev/null +++ b/arch/arm/dts/omap446x-clocks.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for OMAP4 clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + */ +&prm_clocks { + div_ts_ck: div_ts_ck@1888 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&l4_wkup_clk_mux_ck>; + ti,bit-shift = <24>; + reg = <0x1888>; + ti,dividers = <8>, <16>, <32>; + }; + + bandgap_ts_fclk: bandgap_ts_fclk@1888 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&div_ts_ck>; + ti,bit-shift = <8>; + reg = <0x1888>; + }; +}; diff --git a/arch/arm/dts/omap44xx-clocks.dtsi b/arch/arm/dts/omap44xx-clocks.dtsi new file mode 100644 index 0000000000..5328685911 --- /dev/null +++ b/arch/arm/dts/omap44xx-clocks.dtsi @@ -0,0 +1,1324 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for OMAP4 clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + */ +&cm1_clocks { + extalt_clkin_ck: extalt_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <59000000>; + }; + + pad_clks_src_ck: pad_clks_src_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + pad_clks_ck: pad_clks_ck@108 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&pad_clks_src_ck>; + ti,bit-shift = <8>; + reg = <0x0108>; + }; + + pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + secure_32k_clk_src_ck: secure_32k_clk_src_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + slimbus_src_clk: slimbus_src_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + slimbus_clk: slimbus_clk@108 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&slimbus_src_clk>; + ti,bit-shift = <10>; + reg = <0x0108>; + }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + virt_12000000_ck: virt_12000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + virt_13000000_ck: virt_13000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + virt_16800000_ck: virt_16800000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16800000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_26000000_ck: virt_26000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + virt_27000000_ck: virt_27000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; + + virt_38400000_ck: virt_38400000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <38400000>; + }; + + tie_low_clock_ck: tie_low_clock_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + utmi_phy_clkout_ck: utmi_phy_clkout_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + xclk60mhsp1_ck: xclk60mhsp1_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + xclk60mhsp2_ck: xclk60mhsp2_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + xclk60motg_ck: xclk60motg_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + dpll_abe_ck: dpll_abe_ck@1e0 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-m4xen-clock"; + clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; + reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; + }; + + dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_abe_ck>; + reg = <0x01f0>; + }; + + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01f0>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + abe_24m_fclk: abe_24m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m2x2_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + abe_clk: abe_clk@108 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2x2_ck>; + ti,max-div = <4>; + reg = <0x0108>; + ti,index-power-of-two; + }; + + + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01f4>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + + dpll_core_ck: dpll_core_ck@120 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; + reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; + }; + + dpll_core_x2_ck: dpll_core_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_core_ck>; + }; + + dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0140>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_core_m2_ck: dpll_core_m2_ck@130 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0130>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + ddrphy_ck: ddrphy_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x013c>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + div_core_ck: div_core_ck@100 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_m5x2_ck>; + reg = <0x0100>; + ti,max-div = <2>; + }; + + div_iva_hs_clk: div_iva_hs_clk@1dc { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_m5x2_ck>; + ti,max-div = <4>; + reg = <0x01dc>; + ti,index-power-of-two; + }; + + div_mpu_hs_clk: div_mpu_hs_clk@19c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_m5x2_ck>; + ti,max-div = <4>; + reg = <0x019c>; + ti,index-power-of-two; + }; + + dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0138>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dll_clk_div_ck: dll_clk_div_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_m4x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_ck>; + ti,max-div = <31>; + reg = <0x01f0>; + ti,index-starts-at-one; + }; + + dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_x2_ck>; + ti,bit-shift = <8>; + reg = <0x0134>; + }; + + dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0134>; + ti,index-starts-at-one; + }; + + dpll_core_m3x2_ck: dpll_core_m3x2_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>; + }; + + dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0144>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + + dpll_iva_ck: dpll_iva_ck@1a0 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; + reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <931200000>; + }; + + dpll_iva_x2_ck: dpll_iva_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_iva_ck>; + }; + + dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_iva_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01b8>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m4x2_ck>; + assigned-clock-rates = <465600000>; + }; + + dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_iva_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x01bc>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m5x2_ck>; + assigned-clock-rates = <266100000>; + }; + + dpll_mpu_ck: dpll_mpu_ck@160 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; + reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; + }; + + dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_mpu_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0170>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + per_hs_clk_div_ck: per_hs_clk_div_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m3x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + usb_hs_clk_div_ck: usb_hs_clk_div_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m3x2_ck>; + clock-mult = <1>; + clock-div = <3>; + }; + + l3_div_ck: l3_div_ck@100 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&div_core_ck>; + ti,bit-shift = <4>; + ti,max-div = <2>; + reg = <0x0100>; + }; + + l4_div_ck: l4_div_ck@100 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&l3_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <2>; + reg = <0x0100>; + }; + + lp_clk_div_ck: lp_clk_div_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m2x2_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + mpu_periphclk: mpu_periphclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_mpu_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + ocp_abe_iclk: ocp_abe_iclk@528 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>; + ti,bit-shift = <24>; + reg = <0x0528>; + ti,dividers = <2>, <1>; + }; + + per_abe_24m_fclk: per_abe_24m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + dummy_ck: dummy_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + +&prm_clocks { + sys_clkin_ck: sys_clkin_ck@110 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; + reg = <0x0110>; + ti,index-starts-at-one; + }; + + abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&sys_32k_ck>; + ti,bit-shift = <24>; + reg = <0x0108>; + }; + + abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&sys_32k_ck>; + reg = <0x010c>; + }; + + dbgclk_mux_ck: dbgclk_mux_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; + reg = <0x0108>; + }; + + syc_clk_div_ck: syc_clk_div_ck@100 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + reg = <0x0100>; + ti,max-div = <2>; + }; + + usim_ck: usim_ck@1858 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_m4x2_ck>; + ti,bit-shift = <24>; + reg = <0x1858>; + ti,dividers = <14>, <18>; + }; + + usim_fclk: usim_fclk@1858 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usim_ck>; + ti,bit-shift = <8>; + reg = <0x1858>; + }; + + trace_clk_div_ck: trace_clk_div_ck { + #clock-cells = <0>; + compatible = "ti,clkdm-gate-clock"; + clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>; + }; +}; + +&prm_clockdomains { + emu_sys_clkdm: emu_sys_clkdm { + compatible = "ti,clockdomain"; + clocks = <&trace_clk_div_ck>; + }; +}; + +&cm2_clocks { + per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + + dpll_per_ck: dpll_per_ck@140 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; + reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; + }; + + dpll_per_m2_ck: dpll_per_m2_ck@150 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_ck>; + ti,max-div = <31>; + reg = <0x0150>; + ti,index-starts-at-one; + }; + + dpll_per_x2_ck: dpll_per_x2_ck@150 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_per_ck>; + reg = <0x0150>; + }; + + dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0150>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_x2_ck>; + ti,bit-shift = <8>; + reg = <0x0154>; + }; + + dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + reg = <0x0154>; + ti,index-starts-at-one; + }; + + dpll_per_m3x2_ck: dpll_per_m3x2_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>; + }; + + dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0158>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x015c>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0160>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x0164>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_usb_ck: dpll_usb_ck@180 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-j-type-clock"; + clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; + reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; + }; + + dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x01b4>; + ti,clock-mult = <1>; + ti,invert-autoidle-bit; + }; + + dpll_usb_m2_ck: dpll_usb_m2_ck@190 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_ck>; + ti,max-div = <127>; + ti,autoidle-shift = <8>; + reg = <0x0190>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + ducati_clk_mux_ck: ducati_clk_mux_ck@100 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; + reg = <0x0100>; + }; + + func_12m_fclk: func_12m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + func_24m_clk: func_24m_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + func_24mc_fclk: func_24mc_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + func_48m_fclk: func_48m_fclk@108 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_m2x2_ck>; + reg = <0x0108>; + ti,dividers = <4>, <8>; + }; + + func_48mc_fclk: func_48mc_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + func_64m_fclk: func_64m_fclk@108 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_m4x2_ck>; + reg = <0x0108>; + ti,dividers = <2>, <4>; + }; + + func_96m_fclk: func_96m_fclk@108 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_m2x2_ck>; + reg = <0x0108>; + ti,dividers = <2>, <4>; + }; + + init_60m_fclk: init_60m_fclk@104 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_m2_ck>; + reg = <0x0104>; + ti,dividers = <1>, <8>; + }; + + per_abe_nc_fclk: per_abe_nc_fclk@108 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2_ck>; + reg = <0x0108>; + ti,max-div = <2>; + }; + + sha2md5_fck: sha2md5_fck@15c8 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l3_div_ck>; + ti,bit-shift = <1>; + reg = <0x15c8>; + }; + + usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0640>; + }; +}; + +&cm2_clockdomains { + l3_init_clkdm: l3_init_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_usb_ck>; + }; +}; + +&scrm_clocks { + auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0310>; + }; + + auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0310>; + }; + + auxclk0_src_ck: auxclk0_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; + }; + + auxclk0_ck: auxclk0_ck@310 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk0_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0310>; + }; + + auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0314>; + }; + + auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0314>; + }; + + auxclk1_src_ck: auxclk1_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; + }; + + auxclk1_ck: auxclk1_ck@314 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk1_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0314>; + }; + + auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0318>; + }; + + auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0318>; + }; + + auxclk2_src_ck: auxclk2_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; + }; + + auxclk2_ck: auxclk2_ck@318 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk2_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0318>; + }; + + auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x031c>; + }; + + auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x031c>; + }; + + auxclk3_src_ck: auxclk3_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; + }; + + auxclk3_ck: auxclk3_ck@31c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk3_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x031c>; + }; + + auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0320>; + }; + + auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0320>; + }; + + auxclk4_src_ck: auxclk4_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; + }; + + auxclk4_ck: auxclk4_ck@320 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk4_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0320>; + }; + + auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0324>; + }; + + auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0324>; + }; + + auxclk5_src_ck: auxclk5_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>; + }; + + auxclk5_ck: auxclk5_ck@324 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk5_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0324>; + }; + + auxclkreq0_ck: auxclkreq0_ck@210 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; + ti,bit-shift = <2>; + reg = <0x0210>; + }; + + auxclkreq1_ck: auxclkreq1_ck@214 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; + ti,bit-shift = <2>; + reg = <0x0214>; + }; + + auxclkreq2_ck: auxclkreq2_ck@218 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; + ti,bit-shift = <2>; + reg = <0x0218>; + }; + + auxclkreq3_ck: auxclkreq3_ck@21c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; + ti,bit-shift = <2>; + reg = <0x021c>; + }; + + auxclkreq4_ck: auxclkreq4_ck@220 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; + ti,bit-shift = <2>; + reg = <0x0220>; + }; + + auxclkreq5_ck: auxclkreq5_ck@224 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; + ti,bit-shift = <2>; + reg = <0x0224>; + }; +}; + +&cm1 { + mpuss_cm: mpuss_cm@300 { + compatible = "ti,omap4-cm"; + reg = <0x300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300 0x100>; + + mpuss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + tesla_cm: tesla_cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + tesla_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + abe_cm: abe_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + abe_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x6c>; + #clock-cells = <2>; + }; + }; + +}; + +&cm2 { + l4_ao_cm: l4_ao_cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + l4_ao_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + l3_1_cm: l3_1_cm@700 { + compatible = "ti,omap4-cm"; + reg = <0x700 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x700 0x100>; + + l3_1_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_2_cm: l3_2_cm@800 { + compatible = "ti,omap4-cm"; + reg = <0x800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x100>; + + l3_2_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + ducati_cm: ducati_cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + ducati_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_dma_cm: l3_dma_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + l3_dma_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_emif_cm: l3_emif_cm@b00 { + compatible = "ti,omap4-cm"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb00 0x100>; + + l3_emif_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + d2d_cm: d2d_cm@c00 { + compatible = "ti,omap4-cm"; + reg = <0xc00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xc00 0x100>; + + d2d_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l4_cfg_cm: l4_cfg_cm@d00 { + compatible = "ti,omap4-cm"; + reg = <0xd00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd00 0x100>; + + l4_cfg_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + l3_instr_cm: l3_instr_cm@e00 { + compatible = "ti,omap4-cm"; + reg = <0xe00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe00 0x100>; + + l3_instr_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x24>; + #clock-cells = <2>; + }; + }; + + ivahd_cm: ivahd_cm@f00 { + compatible = "ti,omap4-cm"; + reg = <0xf00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xf00 0x100>; + + ivahd_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + iss_cm: iss_cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x100>; + + iss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + l3_dss_cm: l3_dss_cm@1100 { + compatible = "ti,omap4-cm"; + reg = <0x1100 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1100 0x100>; + + l3_dss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_gfx_cm: l3_gfx_cm@1200 { + compatible = "ti,omap4-cm"; + reg = <0x1200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1200 0x100>; + + l3_gfx_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_init_cm: l3_init_cm@1300 { + compatible = "ti,omap4-cm"; + reg = <0x1300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1300 0x100>; + + l3_init_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc4>; + #clock-cells = <2>; + }; + }; + + l4_per_cm: l4_per_cm@1400 { + compatible = "ti,omap4-cm"; + reg = <0x1400 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1400 0x200>; + + l4_per_clkctrl: clock@20 { + compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + reg = <0x20 0x144>; + #clock-cells = <2>; + }; + + l4_secure_clkctrl: clock@1a0 { + compatible = "ti,clkctrl-l4-secure", "ti,clkctrl"; + reg = <0x1a0 0x3c>; + #clock-cells = <2>; + }; + }; +}; + +&prm { + l4_wkup_cm: l4_wkup_cm@1800 { + compatible = "ti,omap4-cm"; + reg = <0x1800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1800 0x100>; + + l4_wkup_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x5c>; + #clock-cells = <2>; + }; + }; + + emu_sys_cm: emu_sys_cm@1a00 { + compatible = "ti,omap4-cm"; + reg = <0x1a00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1a00 0x100>; + + emu_sys_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; +}; diff --git a/arch/arm/dts/omap5-board-common.dtsi b/arch/arm/dts/omap5-board-common.dtsi new file mode 100644 index 0000000000..68ac04641b --- /dev/null +++ b/arch/arm/dts/omap5-board-common.dtsi @@ -0,0 +1,762 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + */ +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + aliases { + display0 = &hdmi0; + }; + + chosen { + stdout-path = &uart3; + }; + + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vsys_cobra: fixedregulator-vsys_cobra { + compatible = "regulator-fixed"; + regulator-name = "vsys_cobra"; + vin-supply = <&vmain>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdds_1v8_main: fixedregulator-vdds_1v8_main { + compatible = "regulator-fixed"; + regulator-name = "vdds_1v8_main"; + vin-supply = <&smps7_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + mmc3_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clk32kgaudio>; + clock-names = "ext_clock"; + }; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ + enable-active-high; + startup-delay-us = <70000>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ + clocks = <&auxclk1_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + #phy-cells = <0>; + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + #phy-cells = <0>; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + /* gpios defined in the board specific dts */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "omap5-uevm"; + + ti,jack-detection; + ti,mclk-freq = <19200000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&gpio8 { + /* TI trees use GPIO instead of msecure, see also muxing */ + p234 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio8_234/msecure"; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_pins + &led_gpio_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ + OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ + OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ + OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ + OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ + OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ + OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ + OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ + OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ + OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ + OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ + OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ + OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ + OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ + >; + }; + + /* TI trees use GPIO mode; msecure mode does not work reliably? */ + palmas_msecure_pins: palmas_msecure_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ + OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ + >; + }; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ + OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ + OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ + OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ + OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ + OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ + OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ + OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; +}; + +&omap5_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_wkup_pins + >; + + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ + >; + }; + + wlcore_irq_pin: pinmux_wlcore_irq_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x16a>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wlcore_irq_pin>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + ref-clock-frequency = <26000000>; + }; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + palmas: palmas@48 { + compatible = "ti,palmas"; + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + ti,mux-pad1 = <0xa1>; + ti,mux-pad2 = <0x1b>; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>; + }; + + clk32kgaudio: palmas_clk32k@1 { + compatible = "ti,palmas-clk32kgaudio"; + #clock-cells = <0>; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + + gpadc: gpadc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 0 + 16 0 + 17 0>; + #io-channel-cells = <1>; + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <10>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-names = "short-irq"; + + ti,ldo6-vibrator; + + smps123-in-supply = <&vsys_cobra>; + smps45-in-supply = <&vsys_cobra>; + smps6-in-supply = <&vsys_cobra>; + smps7-in-supply = <&vsys_cobra>; + smps8-in-supply = <&vsys_cobra>; + smps9-in-supply = <&vsys_cobra>; + smps10_out2-in-supply = <&vsys_cobra>; + smps10_out1-in-supply = <&vsys_cobra>; + ldo1-in-supply = <&vsys_cobra>; + ldo2-in-supply = <&vsys_cobra>; + ldo3-in-supply = <&vdds_1v8_main>; + ldo4-in-supply = <&vdds_1v8_main>; + ldo5-in-supply = <&vsys_cobra>; + ldo6-in-supply = <&vdds_1v8_main>; + ldo7-in-supply = <&vsys_cobra>; + ldo8-in-supply = <&vsys_cobra>; + ldo9-in-supply = <&vmmcsd_fixed>; + ldoln-in-supply = <&vsys_cobra>; + ldousb-in-supply = <&vsys_cobra>; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + ti,smps-range = <0x80>; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ + regulator-name = "ldo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; + }; + + ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + palmas_power_button: palmas_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&palmas>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + #clock-cells = <0>; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>; + + /* audpwron gpio defined in the board specific dts */ + + vio-supply = <&smps7_reg>; + v2v1-supply = <&smps9_reg>; + enable-active-high; + + clocks = <&clk32kgaudio>, <&fref_xtal_ck>; + clock-names = "clk32k", "mclk"; + }; +}; + +&mcpdm_module { + /* Module on the SoC needs external clock from the PMIC */ + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcpdm { + clocks = <&twl6040>; + clock-names = "pdmclk"; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + +&dwc3 { + extcon = <&extcon_usb3>; + dr_mode = "otg"; +}; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&omap5_pmx_core 0x19c>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + /* vdda-supply populated in board specific dts file */ + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/dts/omap5-l4-abe.dtsi b/arch/arm/dts/omap5-l4-abe.dtsi new file mode 100644 index 0000000000..f73eea0b43 --- /dev/null +++ b/arch/arm/dts/omap5-l4-abe.dtsi @@ -0,0 +1,449 @@ +&l4_abe { /* 0x40100000 */ + compatible = "ti,omap5-l4-abe", "simple-bus"; + reg = <0x40100000 0x400>, + <0x40100400 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ + <0x49000000 0x49000000 0x100000>; + segment@0 { /* 0x40100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = + /* CPU to L4 ABE mapping */ + <0x00000000 0x00000000 0x000400>, /* ap 0 */ + <0x00000400 0x00000400 0x000400>, /* ap 1 */ + <0x00022000 0x00022000 0x001000>, /* ap 2 */ + <0x00023000 0x00023000 0x001000>, /* ap 3 */ + <0x00024000 0x00024000 0x001000>, /* ap 4 */ + <0x00025000 0x00025000 0x001000>, /* ap 5 */ + <0x00026000 0x00026000 0x001000>, /* ap 6 */ + <0x00027000 0x00027000 0x001000>, /* ap 7 */ + <0x00028000 0x00028000 0x001000>, /* ap 8 */ + <0x00029000 0x00029000 0x001000>, /* ap 9 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 10 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 11 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 12 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 13 */ + <0x00030000 0x00030000 0x001000>, /* ap 14 */ + <0x00031000 0x00031000 0x001000>, /* ap 15 */ + <0x00032000 0x00032000 0x001000>, /* ap 16 */ + <0x00033000 0x00033000 0x001000>, /* ap 17 */ + <0x00038000 0x00038000 0x001000>, /* ap 18 */ + <0x00039000 0x00039000 0x001000>, /* ap 19 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 20 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 21 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 22 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 23 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 24 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 25 */ + <0x00080000 0x00080000 0x010000>, /* ap 26 */ + <0x00080000 0x00080000 0x001000>, /* ap 27 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 28 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 29 */ + <0x000c0000 0x000c0000 0x010000>, /* ap 30 */ + <0x000c0000 0x000c0000 0x001000>, /* ap 31 */ + <0x000f1000 0x000f1000 0x001000>, /* ap 32 */ + <0x000f2000 0x000f2000 0x001000>, /* ap 33 */ + + /* L3 to L4 ABE mapping */ + <0x49000000 0x49000000 0x000400>, /* ap 0 */ + <0x49000400 0x49000400 0x000400>, /* ap 1 */ + <0x49022000 0x49022000 0x001000>, /* ap 2 */ + <0x49023000 0x49023000 0x001000>, /* ap 3 */ + <0x49024000 0x49024000 0x001000>, /* ap 4 */ + <0x49025000 0x49025000 0x001000>, /* ap 5 */ + <0x49026000 0x49026000 0x001000>, /* ap 6 */ + <0x49027000 0x49027000 0x001000>, /* ap 7 */ + <0x49028000 0x49028000 0x001000>, /* ap 8 */ + <0x49029000 0x49029000 0x001000>, /* ap 9 */ + <0x4902a000 0x4902a000 0x001000>, /* ap 10 */ + <0x4902b000 0x4902b000 0x001000>, /* ap 11 */ + <0x4902e000 0x4902e000 0x001000>, /* ap 12 */ + <0x4902f000 0x4902f000 0x001000>, /* ap 13 */ + <0x49030000 0x49030000 0x001000>, /* ap 14 */ + <0x49031000 0x49031000 0x001000>, /* ap 15 */ + <0x49032000 0x49032000 0x001000>, /* ap 16 */ + <0x49033000 0x49033000 0x001000>, /* ap 17 */ + <0x49038000 0x49038000 0x001000>, /* ap 18 */ + <0x49039000 0x49039000 0x001000>, /* ap 19 */ + <0x4903a000 0x4903a000 0x001000>, /* ap 20 */ + <0x4903b000 0x4903b000 0x001000>, /* ap 21 */ + <0x4903c000 0x4903c000 0x001000>, /* ap 22 */ + <0x4903d000 0x4903d000 0x001000>, /* ap 23 */ + <0x4903e000 0x4903e000 0x001000>, /* ap 24 */ + <0x4903f000 0x4903f000 0x001000>, /* ap 25 */ + <0x49080000 0x49080000 0x010000>, /* ap 26 */ + <0x49080000 0x49080000 0x001000>, /* ap 27 */ + <0x490a0000 0x490a0000 0x010000>, /* ap 28 */ + <0x490a0000 0x490a0000 0x001000>, /* ap 29 */ + <0x490c0000 0x490c0000 0x010000>, /* ap 30 */ + <0x490c0000 0x490c0000 0x001000>, /* ap 31 */ + <0x490f1000 0x490f1000 0x001000>, /* ap 32 */ + <0x490f2000 0x490f2000 0x001000>; /* ap 33 */ + + target-module@22000 { /* 0x40122000, ap 2 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2208c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>, + <0x49022000 0x49022000 0x1000>; + + mcbsp1: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x40124000, ap 4 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2408c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>, + <0x49024000 0x49024000 0x1000>; + + mcbsp2: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x40126000, ap 6 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>, + <0x49026000 0x49026000 0x1000>; + + mcbsp3: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x40128000, ap 8 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>, + <0x49028000 0x49028000 0x1000>; + }; + + target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>, + <0x4902a000 0x4902a000 0x1000>; + }; + + target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>, + <0x4902e000 0x4902e000 0x1000>; + + dmic: dmic@0 { + compatible = "ti,omap4-dmic"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 67>; + dma-names = "up_link"; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x40130000, ap 14 0e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>, + <0x49030000 0x49030000 0x1000>; + }; + + mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>, + <0x49032000 0x49032000 0x1000>; + + /* Must be only enabled for boards with pdmclk wired */ + status = "disabled"; + + mcpdm: mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; + }; + }; + + target-module@38000 { /* 0x40138000, ap 18 12.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x38000 0x4>, + <0x38010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>, + <0x49038000 0x49038000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x49038000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>, + <0x4903a000 0x4903a000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903a000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>, + <0x4903c000 0x4903c000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903c000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>, + <0x4903e000 0x4903e000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903e000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@80000 { /* 0x40180000, ap 26 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>, + <0x49080000 0x49080000 0x10000>; + }; + + target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>, + <0x490a0000 0x490a0000 0x10000>; + }; + + target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x10000>, + <0x490c0000 0x490c0000 0x10000>; + }; + + target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf1000 0x1000>, + <0x490f1000 0x490f1000 0x1000>; + }; + }; +}; diff --git a/arch/arm/dts/omap5-l4.dtsi b/arch/arm/dts/omap5-l4.dtsi new file mode 100644 index 0000000000..8582016d65 --- /dev/null +++ b/arch/arm/dts/omap5-l4.dtsi @@ -0,0 +1,2437 @@ +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap5-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x001000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 21 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 22 */ + <0x00066000 0x00066000 0x001000>, /* ap 23 */ + <0x00067000 0x00067000 0x001000>, /* ap 24 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 69 */ + <0x00060000 0x00060000 0x001000>, /* ap 70 */ + <0x00064000 0x00064000 0x001000>, /* ap 71 */ + <0x00065000 0x00065000 0x001000>, /* ap 72 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 77 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 78 */ + <0x00070000 0x00070000 0x004000>, /* ap 79 */ + <0x00074000 0x00074000 0x001000>, /* ap 80 */ + <0x00075000 0x00075000 0x001000>, /* ap 81 */ + <0x00076000 0x00076000 0x001000>, /* ap 82 */ + <0x00020000 0x00020000 0x020000>, /* ap 109 */ + <0x00040000 0x00040000 0x001000>, /* ap 110 */ + <0x00059000 0x00059000 0x001000>; /* ap 111 */ + + target-module@2000 { /* 0x4a002000, ap 3 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + scm_core: scm@0 { + compatible = "ti,omap5-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + scm_padconf_core: scm@800 { + compatible = "ti,omap5-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x800>; + + omap5_pmx_core: pinmux@40 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x40 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_padconf_global: omap5_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0xec>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0xec>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap5", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 5c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm_core_aon: cm_core_aon@0 { + compatible = "ti,omap5-cm-core-aon", + "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 21 4c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm_core: cm_core@0 { + compatible = "ti,omap5-cm-core", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + target-module@20000 { /* 0x4a020000, ap 109 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss"; + reg = <0x20000 0x4>, + <0x20010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x20000>; + + usb3: omap_dwc3@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + dwc3: dwc3@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "peripheral"; + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, dma_clkdm */ + clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00058000 0x00001000>, + <0x00001000 0x00059000 0x00001000>, + <0x00002000 0x0005a000 0x00001000>, + <0x00003000 0x0005b000 0x00001000>; + }; + + target-module@5e000 { /* 0x4a05e000, ap 69 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 71 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&l3init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 23 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */ + clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp 1>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + mmu_dsp: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + }; + }; + + target-module@70000 { /* 0x4a070000, ap 79 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x4000>; + }; + + target-module@75000 { /* 0x4a075000, ap 81 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x75000 0x1000>; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 25 */ + <0x00075000 0x000f5000 0x001000>, /* ap 26 */ + <0x00076000 0x000f6000 0x001000>, /* ap 27 */ + <0x00077000 0x000f7000 0x001000>, /* ap 28 */ + <0x00036000 0x000b6000 0x001000>, /* ap 65 */ + <0x00037000 0x000b7000 0x001000>, /* ap 66 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 67 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 68 */ + <0x00000000 0x00080000 0x004000>, /* ap 83 */ + <0x00004000 0x00084000 0x001000>, /* ap 84 */ + <0x00005000 0x00085000 0x001000>, /* ap 85 */ + <0x00006000 0x00086000 0x001000>, /* ap 86 */ + <0x00007000 0x00087000 0x001000>, /* ap 87 */ + <0x00008000 0x00088000 0x001000>, /* ap 88 */ + <0x00010000 0x00090000 0x004000>, /* ap 89 */ + <0x00014000 0x00094000 0x001000>, /* ap 90 */ + <0x00015000 0x00095000 0x001000>, /* ap 91 */ + <0x00016000 0x00096000 0x001000>, /* ap 92 */ + <0x00017000 0x00097000 0x001000>, /* ap 93 */ + <0x00018000 0x00098000 0x001000>, /* ap 94 */ + <0x00020000 0x000a0000 0x004000>, /* ap 95 */ + <0x00024000 0x000a4000 0x001000>, /* ap 96 */ + <0x00025000 0x000a5000 0x001000>, /* ap 97 */ + <0x00026000 0x000a6000 0x001000>, /* ap 98 */ + <0x00027000 0x000a7000 0x001000>, /* ap 99 */ + <0x00028000 0x000a8000 0x001000>; /* ap 100 */ + + target-module@0 { /* 0x4a080000, ap 83 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x14 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00004000>, + <0x00004000 0x00004000 0x00001000>, + <0x00005000 0x00005000 0x00001000>, + <0x00006000 0x00006000 0x00001000>, + <0x00007000 0x00007000 0x00001000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x20>; + }; + + usb2_phy: usb2phy@4000 { + compatible = "ti,omap-usb2"; + reg = <0x4000 0x7c>; + syscon-phy-power = <&scm_conf 0x300>; + clocks = <&usb_phy_cm_clk32k>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; + + usb3_phy: usb3phy@4400 { + compatible = "ti,omap-usb3"; + reg = <0x4400 0x80>, + <0x4800 0x64>, + <0x4c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x370>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + target-module@10000 { /* 0x4a090000, ap 89 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x10000 0x4>, + <0x10010 0x4>, + <0x10014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x00004000>, + <0x00004000 0x00014000 0x00001000>, + <0x00005000 0x00015000 0x00001000>, + <0x00006000 0x00016000 0x00001000>, + <0x00007000 0x00017000 0x00001000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x20>; + }; + + sata_phy: phy@6000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x6000 0x80>, /* phy_rx */ + <0x6400 0x64>, /* phy_tx */ + <0x6800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x374>; + clocks = <&sys_clkin>, + <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + clock-names = "sysclk", "refclk"; + #phy-cells = <0>; + }; + }; + + target-module@20000 { /* 0x4a0a0000, ap 95 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00020000 0x00004000>, + <0x00004000 0x00024000 0x00001000>, + <0x00005000 0x00025000 0x00001000>, + <0x00006000 0x00026000 0x00001000>, + <0x00007000 0x00027000 0x00001000>; + }; + + target-module@36000 { /* 0x4a0b6000, ap 65 6c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@4d000 { /* 0x4a0cd000, ap 67 64.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */ + <0x00003000 0x00103000 0x001000>, /* ap 60 */ + <0x00008000 0x00108000 0x001000>, /* ap 61 */ + <0x00009000 0x00109000 0x001000>, /* ap 62 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 63 */ + <0x0000b000 0x0010b000 0x001000>, /* ap 64 */ + <0x00040000 0x00140000 0x010000>, /* ap 101 */ + <0x00050000 0x00150000 0x001000>; /* ap 102 */ + + target-module@2000 { /* 0x4a102000, ap 59 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 61 26.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 63 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@40000 { /* 0x4a140000, ap 101 16.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 30 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 31 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 32 */ + <0x00006000 0x00206000 0x001000>, /* ap 33 */ + <0x00007000 0x00207000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00012000 0x00212000 0x001000>, /* ap 37 */ + <0x00013000 0x00213000 0x001000>, /* ap 38 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 39 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 40 */ + <0x00010000 0x00210000 0x001000>, /* ap 41 */ + <0x00011000 0x00211000 0x001000>, /* ap 42 */ + <0x00016000 0x00216000 0x001000>, /* ap 43 */ + <0x00017000 0x00217000 0x001000>, /* ap 44 */ + <0x00014000 0x00214000 0x001000>, /* ap 45 */ + <0x00015000 0x00215000 0x001000>, /* ap 46 */ + <0x00018000 0x00218000 0x001000>, /* ap 47 */ + <0x00019000 0x00219000 0x001000>, /* ap 48 */ + <0x00020000 0x00220000 0x001000>, /* ap 49 */ + <0x00021000 0x00221000 0x001000>, /* ap 50 */ + <0x00026000 0x00226000 0x001000>, /* ap 51 */ + <0x00027000 0x00227000 0x001000>, /* ap 52 */ + <0x00028000 0x00228000 0x001000>, /* ap 53 */ + <0x00029000 0x00229000 0x001000>, /* ap 54 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 55 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 56 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 57 */ + <0x0001d000 0x0021d000 0x001000>, /* ap 58 */ + <0x0001a000 0x0021a000 0x001000>, /* ap 73 */ + <0x0001b000 0x0021b000 0x001000>, /* ap 74 */ + <0x00024000 0x00224000 0x001000>, /* ap 75 */ + <0x00025000 0x00225000 0x001000>, /* ap 76 */ + <0x00002000 0x00202000 0x001000>, /* ap 103 */ + <0x00003000 0x00203000 0x001000>, /* ap 104 */ + <0x00008000 0x00208000 0x001000>, /* ap 105 */ + <0x00009000 0x00209000 0x001000>, /* ap 106 */ + <0x00022000 0x00222000 0x001000>, /* ap 107 */ + <0x00023000 0x00223000 0x001000>; /* ap 108 */ + + target-module@2000 { /* 0x4a202000, ap 103 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a204000, ap 35 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 33 4e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@8000 { /* 0x4a208000, ap 105 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 31 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 39 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 41 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 37 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 45 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 43 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 47 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1a000 { /* 0x4a21a000, ap 73 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 57 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 29 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 49 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@22000 { /* 0x4a222000, ap 107 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + }; + + target-module@24000 { /* 0x4a224000, ap 75 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 51 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 53 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 55 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap5-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00055000 0x00055000 0x001000>, /* ap 13 */ + <0x00056000 0x00056000 0x001000>, /* ap 14 */ + <0x00057000 0x00057000 0x001000>, /* ap 15 */ + <0x00058000 0x00058000 0x001000>, /* ap 16 */ + <0x00059000 0x00059000 0x001000>, /* ap 17 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 18 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 19 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 20 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 21 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 22 */ + <0x00060000 0x00060000 0x001000>, /* ap 23 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 24 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 25 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 26 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 27 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 28 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 29 */ + <0x00070000 0x00070000 0x001000>, /* ap 30 */ + <0x00071000 0x00071000 0x001000>, /* ap 31 */ + <0x00072000 0x00072000 0x001000>, /* ap 32 */ + <0x00073000 0x00073000 0x001000>, /* ap 33 */ + <0x00061000 0x00061000 0x001000>, /* ap 34 */ + <0x00053000 0x00053000 0x001000>, /* ap 35 */ + <0x00054000 0x00054000 0x001000>, /* ap 36 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 37 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x001000>, /* ap 39 */ + <0x00079000 0x00079000 0x001000>, /* ap 40 */ + <0x00086000 0x00086000 0x001000>, /* ap 41 */ + <0x00087000 0x00087000 0x001000>, /* ap 42 */ + <0x00088000 0x00088000 0x001000>, /* ap 43 */ + <0x00089000 0x00089000 0x001000>, /* ap 44 */ + <0x00051000 0x00051000 0x001000>, /* ap 45 */ + <0x00052000 0x00052000 0x001000>, /* ap 46 */ + <0x00098000 0x00098000 0x001000>, /* ap 47 */ + <0x00099000 0x00099000 0x001000>, /* ap 48 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 49 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 50 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 51 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 52 */ + <0x00068000 0x00068000 0x001000>, /* ap 53 */ + <0x00069000 0x00069000 0x001000>, /* ap 54 */ + <0x00090000 0x00090000 0x002000>, /* ap 55 */ + <0x00092000 0x00092000 0x001000>, /* ap 56 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 61 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 62 */ + <0x00066000 0x00066000 0x001000>, /* ap 63 */ + <0x00067000 0x00067000 0x001000>, /* ap 64 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 65 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 66 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 67 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 68 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 69 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 70 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 71 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 72 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 73 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 74 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 75 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 76 */ + <0x00001400 0x00001400 0x000400>, /* ap 77 */ + <0x00001800 0x00001800 0x000400>, /* ap 78 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 79 */ + <0x000a5000 0x000a5000 0x001000>, /* ap 80 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 81 */ + <0x0007b000 0x0007b000 0x001000>, /* ap 82 */ + <0x0007c000 0x0007c000 0x001000>, /* ap 83 */ + <0x0007d000 0x0007d000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 3e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 46.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x51000 0x4>, + <0x51010 0x4>, + <0x51114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + + gpio7: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@53000 { /* 0x48053000, ap 35 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x53000 0x4>, + <0x53010 0x4>, + <0x53114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + + gpio8: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@55000 { /* 0x48055000, ap 13 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 15 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 23 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@66000 { /* 0x48066000, ap 63 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x66050 0x4>, + <0x66054 0x4>, + <0x66058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + uart5: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@68000 { /* 0x48068000, ap 53 54.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x68050 0x4>, + <0x68054 0x4>, + <0x68058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x1000>; + + uart6: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 26 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 28 44.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 30 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 32 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@78000 { /* 0x48078000, ap 39 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + }; + + target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x7a000 0x8>, + <0x7a010 0x8>, + <0x7a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7a000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@7c000 { /* 0x4807c000, ap 83 34.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x7c000 0x8>, + <0x7c010 0x8>, + <0x7c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x1000>; + + i2c5: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@86000 { /* 0x48086000, ap 41 5e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x86000 0x4>, + <0x86010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 43 66.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + rng_target: target-module@90000 { /* 0x48090000, ap 55 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x91fe0 0x4>, + <0x91fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@98000 { /* 0x48098000, ap 47 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 57 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b2000 { /* 0x480b2000, ap 37 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + }; + + target-module@b4000 { /* 0x480b4000, ap 65 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 67 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_wkup { /* 0x4ae00000 */ + compatible = "ti,omap5-l4-wkup", "simple-bus"; + reg = <0x4ae00000 0x800>, + <0x4ae00800 0x800>, + <0x4ae01000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */ + <0x00010000 0x4ae10000 0x010000>, /* segment 1 */ + <0x00020000 0x4ae20000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4ae00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4ae04000, ap 17 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@6000 { /* 0x4ae06000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap5-prm", "simple-bus"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4ae0a000, ap 15 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap5-scrm"; + reg = <0x0 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4ae0c000, ap 19 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap5_pmx_wkup: pinmux@840 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x840 0x003c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 { + compatible = "ti,omap5-scm-wkup-pad-conf", + "simple-bus"; + reg = <0xda0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60>; + + scm_wkup_pad_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x60>; + + scm_wkup_pad_conf_clocks: clocks@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; + }; + + segment@10000 { /* 0x4ae10000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>; /* ap 12 */ + + target-module@0 { /* 0x4ae10000, ap 5 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>, + <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4ae14000, ap 7 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap5-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x400>; + }; + }; + }; + + segment@20000 { /* 0x4ae20000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 21 */ + <0x00001000 0x00021000 0x001000>, /* ap 22 */ + <0x00002000 0x00022000 0x001000>, /* ap 23 */ + <0x00003000 0x00023000 0x001000>, /* ap 24 */ + <0x00007000 0x00027000 0x000400>, /* ap 25 */ + <0x00008000 0x00028000 0x000800>, /* ap 26 */ + <0x00009000 0x00029000 0x000100>, /* ap 27 */ + <0x00008800 0x00028800 0x000200>, /* ap 28 */ + <0x00008a00 0x00028a00 0x000100>; /* ap 29 */ + + target-module@0 { /* 0x4ae20000, ap 21 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4ae22000, ap 23 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@6000 { /* 0x4ae26000, ap 13 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00002800 0x00008800 0x00000200>, + <0x00002a00 0x00008a00 0x00000100>, + <0x00003000 0x00009000 0x00000100>; + }; + }; +}; diff --git a/arch/arm/dts/omap5-u-boot.dtsi b/arch/arm/dts/omap5-u-boot.dtsi index 39071e223d..5a1c7bc9fe 100644 --- a/arch/arm/dts/omap5-u-boot.dtsi +++ b/arch/arm/dts/omap5-u-boot.dtsi @@ -7,6 +7,7 @@ * Based on "dra7.dtsi" */ +#ifdef CONFIG_DRA7XX /{ chosen { tick-timer = &timer2; @@ -105,3 +106,44 @@ &i2c1 { u-boot,dm-spl; }; + +#else /* OMAP54XX */ +&l4_cfg { + segment@0 { + /* SCM Core */ + target-module@2000 { + compatible = "simple-bus"; + }; + + /* USB HS */ + target-module@64000 { + compatible = "simple-bus"; + }; + }; +}; + +&l4_per { + segment@0 { + /* UART3 */ + target-module@20000 { + compatible = "simple-bus"; + }; + + /* I2C1 */ + target-module@70000 { + compatible = "simple-bus"; + }; + + /* MMC1 */ + target-module@9c000 { + compatible = "simple-bus"; + }; + + /* MMC2 */ + target-module@b4000 { + compatible = "simple-bus"; + }; + }; +}; + +#endif diff --git a/arch/arm/dts/omap5-uevm.dts b/arch/arm/dts/omap5-uevm.dts new file mode 100644 index 0000000000..9441e9a572 --- /dev/null +++ b/arch/arm/dts/omap5-uevm.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + */ +/dts-v1/; + +#include "omap5-board-common.dtsi" + +/ { + model = "TI OMAP5 uEVM board"; + compatible = "ti,omap5-uevm", "ti,omap5"; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ + }; + + aliases { + ethernet = ðernet; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + evm_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&evm_keys_pins>; + + #address-cells = <7>; + #size-cells = <0>; + + btn1 { + label = "BTN1"; + linux,code = <169>; + gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */ + wakeup-source; + autorepeat; + debounce-interval = <50>; + }; + }; + + evm_leds { + compatible = "gpio-leds"; + + led1 { + label = "omap5:red:led"; + gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "omap5:green:led"; + gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led3 { + label = "omap5:blue:led"; + gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + + led4 { + label = "omap5:green:led1"; + gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led5 { + label = "omap5:green:led2"; + gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led6 { + label = "omap5:green:led3"; + gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led7 { + label = "omap5:green:led4"; + gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led8 { + label = "omap5:green:led5"; + gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&hdmi { + vdda-supply = <&ldo4_reg>; +}; + +&i2c1 { + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + + clock-frequency = <400000>; + + gpio9: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */ +}; + +&omap5_pmx_core { + evm_keys_pins: pinmux_evm_keys_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */ + >; + }; +}; + +&tpd12s015 { + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ +}; + +&twl6040 { + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; +}; + +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ethernet: usbether@3 { + compatible = "usb424,9730"; + reg = <3>; + }; +}; + +&wlcore { + compatible = "ti,wl1837"; +}; diff --git a/arch/arm/dts/omap5.dtsi b/arch/arm/dts/omap5.dtsi new file mode 100644 index 0000000000..2ac7f021c2 --- /dev/null +++ b/arch/arm/dts/omap5.dtsi @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on "omap4.dtsi" + */ + +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/clock/omap5.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + compatible = "ti,omap5"; + interrupt-parent = <&wakeupgen>; + chosen { }; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1500000 1250000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1500000 1250000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + thermal-zones { + #include "omap4-cpu-thermal.dtsi" + #include "omap5-gpu-thermal.dtsi" + #include "omap5-core-thermal.dtsi" + }; + + timer { + compatible = "arm,armv7-timer"; + /* PPI secure/nonsecure IRQ */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0 0x48211000 0 0x1000>, + <0 0x48212000 0 0x2000>, + <0 0x48214000 0 0x2000>, + <0 0x48216000 0 0x2000>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0 0x48281000 0 0x1000>; + interrupt-parent = <&gic>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap4-mpu"; + ti,hwmods = "mpu"; + sram = <&ocmcram>; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since it will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap5-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0 0x44000000 0 0x2000>, + <0 0x44800000 0 0x3000>, + <0 0x45000000 0 0x4000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l4_wkup: interconnect@4ae00000 { + }; + + l4_cfg: interconnect@4a000000 { + }; + + l4_per: interconnect@48000000 { + }; + + l4_abe: interconnect@40100000 { + }; + + ocmcram: sram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x20000>; /* 128k */ + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + ranges = <0x0 0x55082000 0x100>; + #size-cells = <1>; + #address-cells = <1>; + + mmu_ipu: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; + }; + + dmm@4e000000 { + compatible = "ti,omap5-dmm"; + reg = <0x4e000000 0x800>; + interrupts = <0 113 0x4>; + ti,hwmods = "dmm"; + }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + ti,no-idle-on-init; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + ti,no-idle-on-init; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + bandgap: bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + compatible = "ti,omap5430-bandgap"; + + #thermal-sensor-cells = <1>; + }; + + /* OCP2SCP3 */ + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + ti,hwmods = "sata"; + ports-implemented = <0x1>; + }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; + + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x58000000 0x1000000>; + + dss: dss@0 { + compatible = "ti,omap5-dss"; + reg = <0 0x80>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap5-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + compatible = "ti,omap5-rfbi"; + reg = <0 0x100>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@9000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x9000 0x4>, + <0x9010 0x4>, + <0x9014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,omap5-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; + }; + }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + }; +}; + +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ + coefficients = <65 (-1791)>; +}; + +#include "omap5-l4.dtsi" +#include "omap54xx-clocks.dtsi" + +&gpu_thermal { + coefficients = <117 (-2992)>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +#include "omap5-l4-abe.dtsi" +#include "omap54xx-clocks.dtsi" + +&prm { + prm_dsp: prm@400 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@1200 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1c00 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/dts/omap54xx-clocks.dtsi b/arch/arm/dts/omap54xx-clocks.dtsi new file mode 100644 index 0000000000..42f2c44772 --- /dev/null +++ b/arch/arm/dts/omap54xx-clocks.dtsi @@ -0,0 +1,1208 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for OMAP5 clock data + * + * Copyright (C) 2013 Texas Instruments, Inc. + */ +&cm_core_aon_clocks { + pad_clks_src_ck: pad_clks_src_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + pad_clks_ck: pad_clks_ck@108 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&pad_clks_src_ck>; + ti,bit-shift = <8>; + reg = <0x0108>; + }; + + secure_32k_clk_src_ck: secure_32k_clk_src_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + slimbus_src_clk: slimbus_src_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + slimbus_clk: slimbus_clk@108 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&slimbus_src_clk>; + ti,bit-shift = <10>; + reg = <0x0108>; + }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + virt_12000000_ck: virt_12000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + virt_13000000_ck: virt_13000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + virt_16800000_ck: virt_16800000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16800000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_26000000_ck: virt_26000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + virt_27000000_ck: virt_27000000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; + + virt_38400000_ck: virt_38400000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <38400000>; + }; + + xclk60mhsp1_ck: xclk60mhsp1_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + xclk60mhsp2_ck: xclk60mhsp2_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <60000000>; + }; + + dpll_abe_ck: dpll_abe_ck@1e0 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-m4xen-clock"; + clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; + reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; + }; + + dpll_abe_x2_ck: dpll_abe_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_abe_ck>; + }; + + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_x2_ck>; + ti,max-div = <31>; + reg = <0x01f0>; + ti,index-starts-at-one; + }; + + abe_24m_fclk: abe_24m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m2x2_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + abe_clk: abe_clk@108 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_m2x2_ck>; + ti,max-div = <4>; + reg = <0x0108>; + ti,index-power-of-two; + }; + + abe_iclk: abe_iclk@528 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&aess_fclk>; + ti,bit-shift = <24>; + reg = <0x0528>; + ti,dividers = <2>, <1>; + }; + + abe_lp_clk_div: abe_lp_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m2x2_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_abe_x2_ck>; + ti,max-div = <31>; + reg = <0x01f4>; + ti,index-starts-at-one; + }; + + dpll_core_byp_mux: dpll_core_byp_mux@12c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + + dpll_core_ck: dpll_core_ck@120 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-core-clock"; + clocks = <&sys_clkin>, <&dpll_core_byp_mux>; + reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; + }; + + dpll_core_x2_ck: dpll_core_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_core_ck>; + }; + + dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x0150>; + ti,index-starts-at-one; + }; + + c2c_fclk: c2c_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h21x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + c2c_iclk: c2c_iclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&c2c_fclk>; + clock-mult = <1>; + clock-div = <2>; + }; + + dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x0138>; + ti,index-starts-at-one; + }; + + dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x013c>; + ti,index-starts-at-one; + }; + + dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x0140>; + ti,index-starts-at-one; + }; + + dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x0144>; + ti,index-starts-at-one; + }; + + dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x0154>; + ti,index-starts-at-one; + }; + + dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x0158>; + ti,index-starts-at-one; + }; + + dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <63>; + reg = <0x015c>; + ti,index-starts-at-one; + }; + + dpll_core_m2_ck: dpll_core_m2_ck@130 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_ck>; + ti,max-div = <31>; + reg = <0x0130>; + ti,index-starts-at-one; + }; + + dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0134>; + ti,index-starts-at-one; + }; + + iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h12x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + + dpll_iva_ck: dpll_iva_ck@1a0 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; + reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <1165000000>; + }; + + dpll_iva_x2_ck: dpll_iva_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_iva_ck>; + }; + + dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_iva_x2_ck>; + ti,max-div = <63>; + reg = <0x01b8>; + ti,index-starts-at-one; + assigned-clocks = <&dpll_iva_h11x2_ck>; + assigned-clock-rates = <465920000>; + }; + + dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_iva_x2_ck>; + ti,max-div = <63>; + reg = <0x01bc>; + ti,index-starts-at-one; + assigned-clocks = <&dpll_iva_h12x2_ck>; + assigned-clock-rates = <388300000>; + }; + + mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_core_h12x2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_mpu_ck: dpll_mpu_ck@160 { + #clock-cells = <0>; + compatible = "ti,omap5-mpu-dpll-clock"; + clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; + reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; + }; + + dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_mpu_ck>; + ti,max-div = <31>; + reg = <0x0170>; + ti,index-starts-at-one; + }; + + per_dpll_hs_clk_div: per_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m3x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_abe_m3x2_ck>; + clock-mult = <1>; + clock-div = <3>; + }; + + l3_iclk_div: l3_iclk_div@100 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; + clocks = <&dpll_core_h12x2_ck>; + ti,index-power-of-two; + }; + + gpu_l3_iclk: gpu_l3_iclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&l3_iclk_div>; + clock-mult = <1>; + clock-div = <1>; + }; + + l4_root_clk_div: l4_root_clk_div@100 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; + clocks = <&l3_iclk_div>; + ti,index-power-of-two; + }; + + slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&slimbus_clk>; + ti,bit-shift = <11>; + reg = <0x0560>; + }; + + aess_fclk: aess_fclk@528 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&abe_clk>; + ti,bit-shift = <24>; + ti,max-div = <2>; + reg = <0x0528>; + }; + + mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; + ti,bit-shift = <26>; + reg = <0x0540>; + }; + + mcasp_gfclk: mcasp_gfclk@540 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; + ti,bit-shift = <24>; + reg = <0x0540>; + }; + + dummy_ck: dummy_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; +&prm_clocks { + sys_clkin: sys_clkin@110 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; + reg = <0x0110>; + ti,index-starts-at-one; + }; + + abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&sys_32k_ck>; + reg = <0x0108>; + }; + + abe_dpll_clk_mux: abe_dpll_clk_mux@10c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&sys_32k_ck>; + reg = <0x010c>; + }; + + custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin>; + clock-mult = <1>; + clock-div = <2>; + }; + + dss_syc_gfclk_div: dss_syc_gfclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin>; + clock-mult = <1>; + clock-div = <1>; + }; + + wkupaon_iclk_mux: wkupaon_iclk_mux@108 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&abe_lp_clk_div>; + reg = <0x0108>; + }; + + l3instr_ts_gclk_div: l3instr_ts_gclk_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&wkupaon_iclk_mux>; + clock-mult = <1>; + clock-div = <1>; + }; +}; + +&cm_core_clocks { + + dpll_per_byp_mux: dpll_per_byp_mux@14c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + + dpll_per_ck: dpll_per_ck@140 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin>, <&dpll_per_byp_mux>; + reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; + }; + + dpll_per_x2_ck: dpll_per_x2_ck { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-x2-clock"; + clocks = <&dpll_per_ck>; + }; + + dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + reg = <0x0158>; + ti,index-starts-at-one; + }; + + dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + reg = <0x015c>; + ti,index-starts-at-one; + }; + + dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <63>; + reg = <0x0164>; + ti,index-starts-at-one; + }; + + dpll_per_m2_ck: dpll_per_m2_ck@150 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_ck>; + ti,max-div = <31>; + reg = <0x0150>; + ti,index-starts-at-one; + }; + + dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + reg = <0x0150>; + ti,index-starts-at-one; + }; + + dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_x2_ck>; + ti,max-div = <31>; + reg = <0x0154>; + ti,index-starts-at-one; + }; + + dpll_unipro1_ck: dpll_unipro1_ck@200 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin>, <&sys_clkin>; + reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; + }; + + dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_unipro1_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_unipro1_ck>; + ti,max-div = <127>; + reg = <0x0210>; + ti,index-starts-at-one; + }; + + dpll_unipro2_ck: dpll_unipro2_ck@1c0 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-clock"; + clocks = <&sys_clkin>, <&sys_clkin>; + reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>; + }; + + dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_unipro2_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_unipro2_ck>; + ti,max-div = <127>; + reg = <0x01d0>; + ti,index-starts-at-one; + }; + + dpll_usb_byp_mux: dpll_usb_byp_mux@18c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + + dpll_usb_ck: dpll_usb_ck@180 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-j-type-clock"; + clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; + reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; + }; + + dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + dpll_usb_m2_ck: dpll_usb_m2_ck@190 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_ck>; + ti,max-div = <127>; + reg = <0x0190>; + ti,index-starts-at-one; + }; + + func_128m_clk: func_128m_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_h11x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + func_12m_fclk: func_12m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + func_24m_clk: func_24m_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + func_48m_fclk: func_48m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + func_96m_fclk: func_96m_fclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_per_m2x2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + l3init_60m_fclk: l3init_60m_fclk@104 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_m2_ck>; + reg = <0x0104>; + ti,dividers = <1>, <8>; + }; + + iss_ctrlclk: iss_ctrlclk@1320 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_96m_fclk>; + ti,bit-shift = <8>; + reg = <0x1320>; + }; + + lli_txphy_clk: lli_txphy_clk@f20 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_unipro1_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x0f20>; + }; + + lli_txphy_ls_clk: lli_txphy_ls_clk@f20 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_unipro1_m2_ck>; + ti,bit-shift = <9>; + reg = <0x0f20>; + }; + + usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0640>; + }; + + fdif_fclk: fdif_fclk@1328 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_h11x2_ck>; + ti,bit-shift = <24>; + ti,max-div = <2>; + reg = <0x1328>; + }; + + gpu_core_gclk_mux: gpu_core_gclk_mux@1520 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; + ti,bit-shift = <24>; + reg = <0x1520>; + }; + + gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; + ti,bit-shift = <25>; + reg = <0x1520>; + }; + + hsi_fclk: hsi_fclk@1638 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_per_m2x2_ck>; + ti,bit-shift = <24>; + ti,max-div = <2>; + reg = <0x1638>; + }; +}; + +&cm_core_clockdomains { + l3init_clkdm: l3init_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_usb_ck>; + }; +}; + +&scrm_clocks { + auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0310>; + }; + + auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0310>; + }; + + auxclk0_src_ck: auxclk0_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; + }; + + auxclk0_ck: auxclk0_ck@310 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk0_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0310>; + }; + + auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0314>; + }; + + auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0314>; + }; + + auxclk1_src_ck: auxclk1_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; + }; + + auxclk1_ck: auxclk1_ck@314 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk1_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0314>; + }; + + auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0318>; + }; + + auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0318>; + }; + + auxclk2_src_ck: auxclk2_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; + }; + + auxclk2_ck: auxclk2_ck@318 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk2_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0318>; + }; + + auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x031c>; + }; + + auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x031c>; + }; + + auxclk3_src_ck: auxclk3_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; + }; + + auxclk3_ck: auxclk3_ck@31c { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk3_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x031c>; + }; + + auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_core_m3x2_ck>; + ti,bit-shift = <8>; + reg = <0x0320>; + }; + + auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; + ti,bit-shift = <1>; + reg = <0x0320>; + }; + + auxclk4_src_ck: auxclk4_src_ck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; + }; + + auxclk4_ck: auxclk4_ck@320 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&auxclk4_src_ck>; + ti,bit-shift = <16>; + ti,max-div = <16>; + reg = <0x0320>; + }; + + auxclkreq0_ck: auxclkreq0_ck@210 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; + ti,bit-shift = <2>; + reg = <0x0210>; + }; + + auxclkreq1_ck: auxclkreq1_ck@214 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; + ti,bit-shift = <2>; + reg = <0x0214>; + }; + + auxclkreq2_ck: auxclkreq2_ck@218 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; + ti,bit-shift = <2>; + reg = <0x0218>; + }; + + auxclkreq3_ck: auxclkreq3_ck@21c { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; + ti,bit-shift = <2>; + reg = <0x021c>; + }; +}; + +&cm_core_aon { + mpu_cm: mpu_cm@300 { + compatible = "ti,omap4-cm"; + reg = <0x300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300 0x100>; + + mpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + dsp_cm: dsp_cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + dsp_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + abe_cm: abe_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + abe_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x64>; + #clock-cells = <2>; + }; + }; + +}; + +&cm_core { + l3main1_cm: l3main1_cm@700 { + compatible = "ti,omap4-cm"; + reg = <0x700 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x700 0x100>; + + l3main1_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3main2_cm: l3main2_cm@800 { + compatible = "ti,omap4-cm"; + reg = <0x800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x100>; + + l3main2_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + ipu_cm: ipu_cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + ipu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + dma_cm: dma_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + dma_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + emif_cm: emif_cm@b00 { + compatible = "ti,omap4-cm"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb00 0x100>; + + emif_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + l4cfg_cm: l4cfg_cm@d00 { + compatible = "ti,omap4-cm"; + reg = <0xd00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd00 0x100>; + + l4cfg_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + l3instr_cm: l3instr_cm@e00 { + compatible = "ti,omap4-cm"; + reg = <0xe00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe00 0x100>; + + l3instr_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + l4per_cm: l4per_cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x200>; + + l4per_clkctrl: clock@20 { + compatible = "ti,clkctrl-l4per", "ti,clkctrl"; + reg = <0x20 0x15c>; + #clock-cells = <2>; + }; + + l4sec_clkctrl: clock@1a0 { + compatible = "ti,clkctrl-l4sec", "ti,clkctrl"; + reg = <0x1a0 0x3c>; + #clock-cells = <2>; + }; + }; + + dss_cm: dss_cm@1400 { + compatible = "ti,omap4-cm"; + reg = <0x1400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1400 0x100>; + + dss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + gpu_cm: gpu_cm@1500 { + compatible = "ti,omap4-cm"; + reg = <0x1500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1500 0x100>; + + gpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3init_cm: l3init_cm@1600 { + compatible = "ti,omap4-cm"; + reg = <0x1600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1600 0x100>; + + l3init_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xd4>; + #clock-cells = <2>; + }; + }; +}; + +&prm { + wkupaon_cm: wkupaon_cm@1900 { + compatible = "ti,omap4-cm"; + reg = <0x1900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1900 0x100>; + + wkupaon_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x5c>; + #clock-cells = <2>; + }; + }; +}; + +&scm_wkup_pad_conf_clocks { + fref_xtal_ck: fref_xtal_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin>; + ti,bit-shift = <28>; + reg = <0x14>; + }; +}; diff --git a/arch/arm/dts/twl6030.dtsi b/arch/arm/dts/twl6030.dtsi new file mode 100644 index 0000000000..9d588cfaa5 --- /dev/null +++ b/arch/arm/dts/twl6030.dtsi @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/twl6030.pdf + */ +&twl { + compatible = "ti,twl6030"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + vaux1: regulator-vaux1 { + compatible = "ti,twl6030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + vaux2: regulator-vaux2 { + compatible = "ti,twl6030-vaux2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + }; + + vaux3: regulator-vaux3 { + compatible = "ti,twl6030-vaux3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + vmmc: regulator-vmmc { + compatible = "ti,twl6030-vmmc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + }; + + vpp: regulator-vpp { + compatible = "ti,twl6030-vpp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + }; + + vusim: regulator-vusim { + compatible = "ti,twl6030-vusim"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2900000>; + }; + + vdac: regulator-vdac { + compatible = "ti,twl6030-vdac"; + }; + + vana: regulator-vana { + compatible = "ti,twl6030-vana"; + }; + + vcxio: regulator-vcxio { + compatible = "ti,twl6030-vcxio"; + regulator-always-on; + }; + + vusb: regulator-vusb { + compatible = "ti,twl6030-vusb"; + }; + + v1v8: regulator-v1v8 { + compatible = "ti,twl6030-v1v8"; + regulator-always-on; + }; + + v2v1: regulator-v2v1 { + compatible = "ti,twl6030-v2v1"; + regulator-always-on; + }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; + + twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charging indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; + + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +}; diff --git a/arch/arm/dts/twl6030_omap4.dtsi b/arch/arm/dts/twl6030_omap4.dtsi new file mode 100644 index 0000000000..fc498d0bde --- /dev/null +++ b/arch/arm/dts/twl6030_omap4.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&twl { + /* + * On most OMAP4 platforms, the twl6030 IRQ line is connected + * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is + * connected to the fref_clk0_out.sys_drm_msecure line. + * Therefore, configure the defaults for the SYS_NIRQ1 and + * fref_clk0_out.sys_drm_msecure pins here. + */ + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_pins + &twl6030_wkup_pins + >; +}; + +&omap4_pmx_wkup { + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ + >; + }; +}; + +&omap4_pmx_core { + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ + >; + }; +}; diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts index bf982e2218..c260411d75 100644 --- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx Versal a2197 RevA System Controller * - * (C) Copyright 2019, Xilinx, Inc. + * (C) Copyright 2019 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -421,14 +421,14 @@ temperature-stability = <50>; factory-fout = <156250000>; clock-frequency = <156250000>; - clock-output-names = "si570_hsdp_clk"; + clock-output-names = "si570_zsfp_clk"; }; }; i2c@6 { /* USER_SI570_1 */ #address-cells = <1>; #size-cells = <0>; reg = <6>; - si570_user1_clk: clock-generator@5d { /* u205 */ + si570_user1: clock-generator@5d { /* u205 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x5f>; @@ -510,7 +510,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si570_ddr_dimm2: clock-generator@60 { /* u3 */ + si570_lpddr4clk2: clock-generator@60 { /* u3 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x60>; @@ -524,7 +524,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <5>; - si570_lpddr4: clock-generator@60 { /* u4 */ + si570_lpddr4clk1: clock-generator@60 { /* u4 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x60>; diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts index c523e81236..a76e640466 100644 --- a/arch/arm/dts/zynqmp-mini-qspi.dts +++ b/arch/arm/dts/zynqmp-mini-qspi.dts @@ -70,7 +70,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; - spi-max-frequency = <10000000>; + spi-max-frequency = <108000000>; }; }; diff --git a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts new file mode 100644 index 0000000000..0ee8c62f6b --- /dev/null +++ b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Topic XDP (Xilinx Drone Platform) + * + * (C) Copyright 2016, Topic Embedded Products BV + * Mike Looijmans <mike.looijmans@topic.nl> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "Topic Miamimp ZynqMP XDP v1r1"; + compatible = "topic,miamimp-xdp-v1r1", "topic,miamimp-xdp", + "topic,miamimp", "xlnx,zynqmp"; + + aliases { + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart1; + serial1 = &uart0; + serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "st,m25p80", "n25q256a"; + m25p,fast-read; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <166000000>; + #address-cells = <1>; + #size-cells = <1>; + is-dual = <1>; + partition@0 { + label = "qspi-boot-bin"; + reg = <0x00000 0x60000>; + }; + partition@60000 { + label = "qspi-u-boot-itb"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "qspi-u-boot-env"; + reg = <0x160000 0x20000>; + }; + partition@200000 { + label = "qspi-rootfs"; + reg = <0x200000 0x1e00000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +/* eMMC device */ +&sdhci0 { + status = "okay"; + non-removable; + disable-wp; /* We don't have a write-protect detection */ + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + xlnx,mio_bank = <1>; + disable-wp; /* We don't have a write-protect detection */ + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index b839aa7a50..27b12e7f2b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o obj-$(CONFIG_SEMIHOSTING) += semihosting.o +obj-y += bdinfo.o obj-y += sections.o obj-y += stack.o ifdef CONFIG_CPU_V7M diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c new file mode 100644 index 0000000000..81c9291584 --- /dev/null +++ b/arch/arm/lib/bdinfo.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ARM-specific information for the 'bd' command + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#include <common.h> +#include <init.h> + +DECLARE_GLOBAL_DATA_PTR; + +void arch_print_bdinfo(void) +{ + bd_t *bd = gd->bd; + + bdinfo_print_num("arch_number", bd->bi_arch_number); +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) { + bdinfo_print_num("Secure ram", + gd->arch.secure_ram & + MEM_RESERVE_SECURE_ADDR_MASK); + } +#endif +#ifdef CONFIG_RESV_RAM + if (gd->arch.resv_ram) + bdinfo_print_num("Reserved ram", gd->arch.resv_ram); +#endif +#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + bdinfo_print_num("TLB addr", gd->arch.tlb_addr); +#endif + bdinfo_print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ + bdinfo_print_num("sp start ", gd->start_addr_sp); + /* + * TODO: Currently only support for davinci SOC's is added. + * Remove this check once all the board implement this. + */ +#ifdef CONFIG_CLOCKS + printf("ARM frequency = %ld MHz\n", bd->bi_arm_freq); + printf("DSP frequency = %ld MHz\n", bd->bi_dsp_freq); + printf("DDR frequency = %ld MHz\n", bd->bi_ddr_freq); +#endif +#ifdef CONFIG_BOARD_TYPES + printf("Board Type = %ld\n", gd->board_type); +#endif +#if CONFIG_VAL(SYS_MALLOC_F_LEN) + printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr, + CONFIG_VAL(SYS_MALLOC_F_LEN)); +#endif +} diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 3412df0f06..309039347c 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -5,8 +5,6 @@ #ifndef __AT91RM9200_H__ #define __AT91RM9200_H__ -#define CONFIG_AT91_GPIO /* and require always gpio features */ - /* Periperial Identifiers */ #define ATMEL_ID_SYS 1 /* System Peripheral */ diff --git a/arch/arm/mach-davinci/include/mach/sdmmc_defs.h b/arch/arm/mach-davinci/include/mach/sdmmc_defs.h index 46f6391aa2..f95a607e52 100644 --- a/arch/arm/mach-davinci/include/mach/sdmmc_defs.h +++ b/arch/arm/mach-davinci/include/mach/sdmmc_defs.h @@ -152,6 +152,13 @@ struct davinci_mmc { struct mmc_config cfg; }; +#define DAVINCI_MAX_BLOCKS (32) +struct davinci_mmc_plat { + struct davinci_mmc_regs *reg_base; /* Register base address */ + struct mmc_config cfg; + struct mmc mmc; +}; + int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host); #endif /* _SDMMC_DEFS_H */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 6c3fedf665..1531d09f3b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -52,6 +52,8 @@ config IMX_HAB config CSF_SIZE hex "Maximum size for Command Sequence File (CSF) binary" + depends on IMX_HAB + default 0x2000 if ARCH_IMX8M default 0x2060 help Define the maximum size for Command Sequence File (CSF) binary diff --git a/arch/arm/mach-imx/spl_qspi.cfg b/arch/arm/mach-imx/spl_qspi.cfg index 88956e626f..1e39ae2f01 100644 --- a/arch/arm/mach-imx/spl_qspi.cfg +++ b/arch/arm/mach-imx/spl_qspi.cfg @@ -12,6 +12,6 @@ BOOT_FROM qspi /* * Secure boot support */ -#ifdef CONFIG_SECURE_BOOT +#ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE #endif diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4c87cbc00f..48bc80a639 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -181,7 +181,6 @@ source "board/BuR/brppt1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" -source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/am335x/Kconfig" diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h index f6de1ccb4a..a85c5aeef9 100644 --- a/arch/arm/mach-socfpga/include/mach/misc.h +++ b/arch/arm/mach-socfpga/include/mach/misc.h @@ -20,7 +20,7 @@ extern struct bsel bsel_str[]; #ifdef CONFIG_FPGA void socfpga_fpga_add(void *fpga_desc); #else -inline void socfpga_fpga_add(void *fpga_desc) {} +static inline void socfpga_fpga_add(void *fpga_desc) {} #endif #ifdef CONFIG_TARGET_SOCFPGA_GEN5 diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 00facf492e..15e7684028 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -58,7 +58,6 @@ config TEGRA_COMMON select MISC select OF_CONTROL select SPI - select VIDCONSOLE_AS_LCD if DM_VIDEO imply CMD_DM imply CRC32_VERIFY diff --git a/arch/arm/mach-tegra/ivc.c b/arch/arm/mach-tegra/ivc.c index e7c6d78744..b69a458fdf 100644 --- a/arch/arm/mach-tegra/ivc.c +++ b/arch/arm/mach-tegra/ivc.c @@ -124,11 +124,11 @@ static inline int tegra_ivc_channel_empty(struct tegra_ivc *ivc, { /* * This function performs multiple checks on the same values with - * security implications, so create snapshots with ACCESS_ONCE() to + * security implications, so create snapshots with READ_ONCE() to * ensure that these checks use the same values. */ - uint32_t w_count = ACCESS_ONCE(ch->w_count); - uint32_t r_count = ACCESS_ONCE(ch->r_count); + uint32_t w_count = READ_ONCE(ch->w_count); + uint32_t r_count = READ_ONCE(ch->r_count); /* * Perform an over-full check to prevent denial of service attacks where @@ -153,14 +153,14 @@ static inline int tegra_ivc_channel_full(struct tegra_ivc *ivc, * Invalid cases where the counters indicate that the queue is over * capacity also appear full. */ - return (ACCESS_ONCE(ch->w_count) - ACCESS_ONCE(ch->r_count)) >= + return (READ_ONCE(ch->w_count) - READ_ONCE(ch->r_count)) >= ivc->nframes; } static inline void tegra_ivc_advance_rx(struct tegra_ivc *ivc) { - ACCESS_ONCE(ivc->rx_channel->r_count) = - ACCESS_ONCE(ivc->rx_channel->r_count) + 1; + WRITE_ONCE(ivc->rx_channel->r_count, + READ_ONCE(ivc->rx_channel->r_count) + 1); if (ivc->r_pos == ivc->nframes - 1) ivc->r_pos = 0; @@ -170,8 +170,8 @@ static inline void tegra_ivc_advance_rx(struct tegra_ivc *ivc) static inline void tegra_ivc_advance_tx(struct tegra_ivc *ivc) { - ACCESS_ONCE(ivc->tx_channel->w_count) = - ACCESS_ONCE(ivc->tx_channel->w_count) + 1; + WRITE_ONCE(ivc->tx_channel->w_count, + READ_ONCE(ivc->tx_channel->w_count) + 1); if (ivc->w_pos == ivc->nframes - 1) ivc->w_pos = 0; @@ -232,7 +232,7 @@ static inline uint32_t tegra_ivc_channel_avail_count(struct tegra_ivc *ivc, * comment in tegra_ivc_channel_empty() for an explanation about * special over-full considerations. */ - return ACCESS_ONCE(ch->w_count) - ACCESS_ONCE(ch->r_count); + return READ_ONCE(ch->w_count) - READ_ONCE(ch->r_count); } int tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc, void **frame) @@ -358,7 +358,7 @@ int tegra_ivc_channel_notified(struct tegra_ivc *ivc) /* Copy the receiver's state out of shared memory. */ offset = offsetof(struct tegra_ivc_channel_header, w_count); tegra_ivc_invalidate_counter(ivc, ivc->rx_channel, offset); - peer_state = ACCESS_ONCE(ivc->rx_channel->state); + peer_state = READ_ONCE(ivc->rx_channel->state); if (peer_state == ivc_state_sync) { /* diff --git a/arch/m68k/config.mk b/arch/m68k/config.mk index 88b1a409f2..ed592334af 100644 --- a/arch/m68k/config.mk +++ b/arch/m68k/config.mk @@ -3,10 +3,6 @@ # (C) Copyright 2000-2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := m68k-elf- -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000 PLATFORM_CPPFLAGS += -D__M68K__ diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index a040f40eb8..b66d66afd2 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -7,6 +7,7 @@ ## if the user asked for it lib-$(CONFIG_USE_PRIVATE_LIBGCC) += lshrdi3.o muldi3.o ashldi3.o +obj-y += bdinfo.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cache.o obj-y += interrupts.o diff --git a/arch/m68k/lib/bdinfo.c b/arch/m68k/lib/bdinfo.c new file mode 100644 index 0000000000..971c47c306 --- /dev/null +++ b/arch/m68k/lib/bdinfo.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PPC-specific information for the 'bd' command + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#include <common.h> +#include <init.h> + +DECLARE_GLOBAL_DATA_PTR; + +void arch_print_bdinfo(void) +{ + bd_t *bd = gd->bd; + +#if defined(CONFIG_SYS_INIT_RAM_ADDR) + bdinfo_print_num("sramstart", (ulong)bd->bi_sramstart); + bdinfo_print_num("sramsize", (ulong)bd->bi_sramsize); +#endif + bdinfo_print_mhz("busfreq", bd->bi_busfreq); +#if defined(CONFIG_SYS_MBAR) + bdinfo_print_num("mbar", bd->bi_mbar_base); +#endif + bdinfo_print_mhz("cpufreq", bd->bi_intfreq); + if (IS_ENABLED(CONFIG_PCI)) + bdinfo_print_mhz("pcifreq", bd->bi_pcifreq); +#ifdef CONFIG_EXTRA_CLOCK + bdinfo_print_mhz("flbfreq", bd->bi_flbfreq); + bdinfo_print_mhz("inpfreq", bd->bi_inpfreq); + bdinfo_print_mhz("vcofreq", bd->bi_vcofreq); +#endif +} diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 3c5866a295..96c39b1278 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -6,10 +6,6 @@ # (C) Copyright 2004 Atmark Techno, Inc. # Yasushi SHOJI <yashi@atmark-techno.com> -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := mb- -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ diff --git a/arch/nds32/config.mk b/arch/nds32/config.mk index a1c3371ddc..c82dd69c6c 100644 --- a/arch/nds32/config.mk +++ b/arch/nds32/config.mk @@ -8,10 +8,6 @@ # Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> # -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := nds32le-linux- -endif - CONFIG_STANDALONE_LOAD_ADDR = 0x300000 LDFLAGS_STANDALONE += -T $(srctree)/examples/standalone/nds32.lds diff --git a/arch/nds32/include/asm/u-boot.h b/arch/nds32/include/asm/u-boot.h index 8c949e7fb7..7b6e905f2a 100644 --- a/arch/nds32/include/asm/u-boot.h +++ b/arch/nds32/include/asm/u-boot.h @@ -19,26 +19,10 @@ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 +/* Use the generic board which requires a unified bd_info */ +#include <asm-generic/u-boot.h> #include <asm/u-boot-nds32.h> - -typedef struct bd_info { - unsigned long bi_arch_number; /* unique id for this board */ - unsigned long bi_boot_params; /* where this board expects params */ - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned char bi_enetaddr[6]; - - struct /* RAM configuration */ - { - unsigned long start; - unsigned long size; - } bi_dram[CONFIG_NR_DRAM_BANKS]; -} bd_t; - /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_NDS32 diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index c63d170eae..44260b1431 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -4,10 +4,6 @@ # Psyent Corporation <www.psyent.com> # Scott McNutt <smcnutt@psyent.com> -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := nios2-elf- -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0x02000000 PLATFORM_CPPFLAGS += -D__NIOS2__ diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 88e2c58cb4..307ca65745 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -3,10 +3,6 @@ # (C) Copyright 2000-2010 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := ppc_8xx- -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 LDFLAGS_FINAL += --gc-sections LDFLAGS_FINAL += --bss-plt diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 285cc56799..753d0750b2 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -24,45 +24,6 @@ config TARGET_SOCRATES bool "Support socrates" select ARCH_MPC8544 -config TARGET_B4420QDS - bool "Support B4420QDS" - select ARCH_B4420 - select SUPPORT_SPL - select PHYS_64BIT - imply PANIC_HANG - -config TARGET_B4860QDS - bool "Support B4860QDS" - select ARCH_B4860 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - select FSL_DDR_INTERACTIVE if !SPL_BUILD - imply PANIC_HANG - -config TARGET_BSC9131RDB - bool "Support BSC9131RDB" - select ARCH_BSC9131 - select SUPPORT_SPL - select BOARD_EARLY_INIT_F - -config TARGET_BSC9132QDS - bool "Support BSC9132QDS" - select ARCH_BSC9132 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select BOARD_EARLY_INIT_F - select FSL_DDR_INTERACTIVE - -config TARGET_C29XPCIE - bool "Support C29XPCIE" - select ARCH_C29X - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select SUPPORT_TPL - select PHYS_64BIT - imply PANIC_HANG - config TARGET_P3041DS bool "Support P3041DS" select PHYS_64BIT @@ -95,14 +56,6 @@ config TARGET_P5040DS imply CMD_SATA imply PANIC_HANG -config TARGET_MPC8536DS - bool "Support MPC8536DS" - select ARCH_MPC8536 -# Use DDR3 controller with DDR2 DIMMs on this board - select SYS_FSL_DDRC_GEN3 - imply CMD_SATA - imply FSL_SATA - config TARGET_MPC8541CDS bool "Support MPC8541CDS" select ARCH_MPC8541 @@ -156,14 +109,6 @@ config TARGET_P1010RDB_PB imply CMD_SATA imply PANIC_HANG -config TARGET_P1022DS - bool "Support P1022DS" - select ARCH_P1022 - select SUPPORT_SPL - select SUPPORT_TPL - imply CMD_SATA - imply FSL_SATA - config TARGET_P1023RDB bool "Support P1023RDB" select ARCH_P1023 @@ -243,10 +188,6 @@ config TARGET_P2020RDB imply CMD_SATA imply SATA_SIL -config TARGET_P1_TWR - bool "Support p1_twr" - select ARCH_P1025 - config TARGET_P2041RDB bool "Support P2041RDB" select ARCH_P2041 @@ -260,16 +201,6 @@ config TARGET_QEMU_PPCE500 select ARCH_QEMU_E500 select PHYS_64BIT -config TARGET_T1024QDS - bool "Support T1024QDS" - select ARCH_T1024 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - imply CMD_EEPROM - imply CMD_SATA - imply FSL_SATA - config TARGET_T1023RDB bool "Support T1023RDB" select ARCH_T1023 @@ -290,16 +221,6 @@ config TARGET_T1024RDB imply CMD_EEPROM imply PANIC_HANG -config TARGET_T1040QDS - bool "Support T1040QDS" - select ARCH_T1040 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select PHYS_64BIT - select FSL_DDR_INTERACTIVE - imply CMD_EEPROM - imply CMD_SATA - imply PANIC_HANG - config TARGET_T1040RDB bool "Support T1040RDB" select ARCH_T1040 @@ -371,15 +292,6 @@ config TARGET_T2081QDS select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE select FSL_DDR_INTERACTIVE -config TARGET_T4160QDS - bool "Support T4160QDS" - select ARCH_T4160 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - imply CMD_SATA - imply PANIC_HANG - config TARGET_T4160RDB bool "Support T4160RDB" select ARCH_T4160 @@ -387,16 +299,6 @@ config TARGET_T4160RDB select PHYS_64BIT imply PANIC_HANG -config TARGET_T4240QDS - bool "Support T4240QDS" - select ARCH_T4240 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE - imply CMD_SATA - imply PANIC_HANG - config TARGET_T4240RDB bool "Support T4240RDB" select ARCH_T4240 @@ -1595,12 +1497,7 @@ config SYS_FSL_LBC_CLK_DIV Defines divider of platform clock(clock input to eLBC controller). -source "board/freescale/b4860qds/Kconfig" -source "board/freescale/bsc9131rdb/Kconfig" -source "board/freescale/bsc9132qds/Kconfig" -source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" -source "board/freescale/mpc8536ds/Kconfig" source "board/freescale/mpc8541cds/Kconfig" source "board/freescale/mpc8544ds/Kconfig" source "board/freescale/mpc8548cds/Kconfig" @@ -1609,19 +1506,14 @@ source "board/freescale/mpc8568mds/Kconfig" source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig" -source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" -source "board/freescale/p1_twr/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig" -source "board/freescale/t102xqds/Kconfig" source "board/freescale/t102xrdb/Kconfig" -source "board/freescale/t1040qds/Kconfig" source "board/freescale/t104xrdb/Kconfig" source "board/freescale/t208xqds/Kconfig" source "board/freescale/t208xrdb/Kconfig" -source "board/freescale/t4qds/Kconfig" source "board/freescale/t4rdb/Kconfig" source "board/gdsys/p1022/Kconfig" source "board/keymile/Kconfig" diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 01c9dd51be..f61809ab05 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -15,6 +15,8 @@ MINIMAL=y endif endif +obj-y += bdinfo.o + ifdef MINIMAL obj-y += cache.o time.o ifndef CONFIG_TIMER diff --git a/arch/powerpc/lib/bdinfo.c b/arch/powerpc/lib/bdinfo.c new file mode 100644 index 0000000000..d8c64155f0 --- /dev/null +++ b/arch/powerpc/lib/bdinfo.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PPC-specific information for the 'bd' command + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#include <common.h> +#include <init.h> + +DECLARE_GLOBAL_DATA_PTR; + +void __weak board_detail(void) +{ + /* Please define board_detail() for your PPC platform */ +} + +void arch_print_bdinfo(void) +{ + bd_t *bd = gd->bd; + +#if defined(CONFIG_SYS_INIT_RAM_ADDR) + bdinfo_print_num("sramstart", (ulong)bd->bi_sramstart); + bdinfo_print_num("sramsize", (ulong)bd->bi_sramsize); +#endif + bdinfo_print_mhz("busfreq", bd->bi_busfreq); +#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) + bdinfo_print_num("immr_base", bd->bi_immr_base); +#endif + bdinfo_print_num("bootflags", bd->bi_bootflags); + bdinfo_print_mhz("intfreq", bd->bi_intfreq); +#ifdef CONFIG_ENABLE_36BIT_PHYS + if (IS_ENABLED(CONFIG_PHYS_64BIT)) + puts("addressing = 36-bit\n"); + else + puts("addressing = 32-bit\n"); +#endif + board_detail(); +#if defined(CONFIG_CPM2) + bdinfo_print_mhz("cpmfreq", bd->bi_cpmfreq); + bdinfo_print_mhz("vco", bd->bi_vco); + bdinfo_print_mhz("sccfreq", bd->bi_sccfreq); + bdinfo_print_mhz("brgfreq", bd->bi_brgfreq); +#endif +} diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index ff8a9f8ddc..009a545fcf 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -20,6 +20,9 @@ config TARGET_QEMU_VIRT config TARGET_SIFIVE_FU540 bool "Support SiFive FU540 Board" +config TARGET_SIPEED_MAIX + bool "Support Sipeed Maix Board" + endchoice config SYS_ICACHE_OFF @@ -53,6 +56,7 @@ source "board/AndesTech/ax25-ae350/Kconfig" source "board/emulation/qemu-riscv/Kconfig" source "board/microchip/mpfs_icicle/Kconfig" source "board/sifive/fu540/Kconfig" +source "board/sipeed/maix/Kconfig" # platform-specific options below source "arch/riscv/cpu/ax25/Kconfig" @@ -269,6 +273,16 @@ config XIP config SHOW_REGS bool "Show registers on unhandled exception" +config RISCV_PRIV_1_9 + bool "Use version 1.9 of the RISC-V priviledged specification" + help + Older versions of the RISC-V priviledged specification had + separate counter enable CSRs for each privilege mode. Writing + to the unified mcounteren CSR on a processor implementing the + old specification will result in an illegal instruction + exception. In addition to counter CSR changes, the way virtual + memory is configured was also changed. + config STACK_SIZE_SHIFT int default 14 diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c index 5804aa8e73..bbd6c15352 100644 --- a/arch/riscv/cpu/cpu.c +++ b/arch/riscv/cpu/cpu.c @@ -91,13 +91,28 @@ int arch_cpu_init_dm(void) * Enable perf counters for cycle, time, * and instret counters only */ +#ifdef CONFIG_RISCV_PRIV_1_9 + csr_write(CSR_MSCOUNTEREN, GENMASK(2, 0)); + csr_write(CSR_MUCOUNTEREN, GENMASK(2, 0)); +#else csr_write(CSR_MCOUNTEREN, GENMASK(2, 0)); +#endif /* Disable paging */ if (supports_extension('s')) +#ifdef CONFIG_RISCV_PRIV_1_9 + csr_read_clear(CSR_MSTATUS, SR_VM); +#else csr_write(CSR_SATP, 0); +#endif } +#ifdef CONFIG_SMP + ret = riscv_init_ipi(); + if (ret) + return ret; +#endif + return 0; } diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 5f1c220e0c..f408e41ab9 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -65,6 +65,8 @@ _start: #else li t0, SIE_SSIE #endif + /* Clear any pending IPIs */ + csrc MODE_PREFIX(ip), t0 csrs MODE_PREFIX(ie), t0 #endif diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index 4f30e6936f..3a6f96c67d 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb +dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb targets += $(dtb-y) diff --git a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi index 303806454b..e037150520 100644 --- a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi +++ b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi @@ -8,6 +8,10 @@ / { aliases { + cpu1 = &cpu1; + cpu2 = &cpu2; + cpu3 = &cpu3; + cpu4 = &cpu4; spi0 = &qspi0; spi2 = &qspi2; }; diff --git a/arch/riscv/dts/k210-maix-bit.dts b/arch/riscv/dts/k210-maix-bit.dts new file mode 100644 index 0000000000..5b32c5fd5f --- /dev/null +++ b/arch/riscv/dts/k210-maix-bit.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> + */ + +/dts-v1/; + +#include "k210.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Sipeed Maix Bit 2.0"; + compatible = "sipeed,maix-bitm", "sipeed,maix-bit", "kendryte,k210"; + + chosen { + stdout-path = "serial0:115200"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + }; + + simple-audio-card,codec { + sound-dai = <&mic>; + }; + }; + + mic: mic { + #sound-dai-cells = <0>; + compatible = "memsensing,msm61s4030h0"; + status = "disabled"; + }; +}; + +&uarths0 { + status = "okay"; +}; + +&i2s0 { + #sound-dai-cells = <1>; +}; diff --git a/arch/riscv/dts/k210.dtsi b/arch/riscv/dts/k210.dtsi new file mode 100644 index 0000000000..2546c7d4e0 --- /dev/null +++ b/arch/riscv/dts/k210.dtsi @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> + */ + +#include <dt-bindings/clock/k210-sysctl.h> +#include <dt-bindings/mfd/k210-sysctl.h> +#include <dt-bindings/reset/k210-sysctl.h> + +/ { + /* + * Although the K210 is a 64-bit CPU, the address bus is only 32-bits + * wide, and the upper half of all addresses is ignored. + */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210"; + + aliases { + dma0 = &dmac0; + gpio0 = &gpio0; + gpio1 = &gpio1_0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + pinctrl0 = &fpioa; + serial0 = &uarths0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + timer0 = &timer0; + timer1 = &timer1; + timer2 = &timer2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <7800000>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "kendryte,k210", "sifive,rocket0", "riscv"; + reg = <0>; + riscv,isa = "rv64imafdgc"; + mmu-type = "sv39"; + i-cache-block-size = <64>; + i-cache-size = <0x8000>; + d-cache-block-size = <64>; + d-cache-size = <0x8000>; + clocks = <&sysclk K210_CLK_CPU>; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "kendryte,k210", "sifive,rocket0", "riscv"; + reg = <1>; + riscv,isa = "rv64imafdgc"; + mmu-type = "sv39"; + i-cache-block-size = <64>; + i-cache-size = <0x8000>; + d-cache-block-size = <64>; + d-cache-size = <0x8000>; + clocks = <&sysclk K210_CLK_CPU>; + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + }; + + sram: memory@80000000 { + device_type = "memory"; + compatible = "kendryte,k210-sram"; + reg = <0x80000000 0x400000>, + <0x80400000 0x200000>, + <0x80600000 0x200000>; + reg-names = "sram0", "sram1", "airam"; + clocks = <&sysclk K210_CLK_SRAM0>, + <&sysclk K210_CLK_SRAM1>, + <&sysclk K210_CLK_PLL1>; + clock-names = "sram0", "sram1", "airam"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ai_reserved: ai@80600000 { + reg = <0x80600000 0x200000>; + reusable; + }; + }; + + clocks { + in0: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-soc", "simple-bus"; + ranges; + interrupt-parent = <&plic0>; + + debug0: debug@0 { + compatible = "kendryte,k210-debug", "riscv,debug"; + reg = <0x0 0x1000>; + }; + + rom0: nvmem@1000 { + reg = <0x1000 0x1000>; + read-only; + }; + + clint0: interrupt-controller@2000000 { + #interrupt-cells = <1>; + compatible = "kendryte,k210-clint", "riscv,clint0"; + reg = <0x2000000 0xC000>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>; + clocks = <&sysclk K210_CLK_CPU>; + }; + + plic0: interrupt-controller@C000000 { + #interrupt-cells = <1>; + compatible = "kendryte,k210-plic", "riscv,plic0"; + reg = <0xC000000 0x4000000>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 9>, <&cpu0_intc 11>, + <&cpu1_intc 9>, <&cpu1_intc 11>; + riscv,ndev = <65>; + riscv,max-priority = <7>; + }; + + uarths0: serial@38000000 { + compatible = "kendryte,k210-uarths", "sifive,uart0"; + reg = <0x38000000 0x1000>; + interrupts = <33>; + clocks = <&sysclk K210_CLK_CPU>; + status = "disabled"; + }; + + gpio0: gpio-controller@38001000 { + #interrupt-cells = <2>; + #gpio-cells = <2>; + compatible = "kendryte,k210-gpiohs", "sifive,gpio0"; + reg = <0x38001000 0x1000>; + interrupt-controller; + interrupts = <34 35 36 37 38 39 40 41 + 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 + 58 59 60 61 62 63 64 65>; + gpio-controller; + ngpios = <32>; + status = "disabled"; + }; + + kpu0: kpu@40800000 { + compatible = "kendryte,k210-kpu"; + reg = <0x40800000 0xc00000>; + interrupts = <25>; + clocks = <&sysclk K210_CLK_AI>; + memory-region = <&ai_reserved>; + status = "disabled"; + }; + + fft0: fft@42000000 { + compatible = "kendryte,k210-fft"; + reg = <0x42000000 0x400000>; + interrupts = <26>; + clocks = <&sysclk K210_CLK_FFT>; + resets = <&sysrst K210_RST_FFT>; + status = "disabled"; + }; + + dmac0: dma-controller@50000000 { + compatible = "kendryte,k210-dmac", "snps,axi-dma-1.01a"; + reg = <0x50000000 0x1000>; + interrupts = <27 28 29 30 31 32>; + clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>; + clock-names = "core-clk", "cfgr-clk"; + resets = <&sysrst K210_RST_DMA>; + dma-channels = <6>; + snps,dma-masters = <2>; + snps,data-width = <5>; + snps,block-size = <0x400000 0x400000 0x400000 + 0x400000 0x400000 0x400000>; + snps,axi-max-burst-len = <256>; + status = "disabled"; + }; + + apb0: bus@50200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-apb", "simple-pm-bus"; + ranges; + clocks = <&sysclk K210_CLK_APB0>; + + gpio1: gpio-controller@50200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "kendryte,k210-gpio", + "snps,dw-apb-gpio"; + reg = <0x50200000 0x80>; + clocks = <&sysclk K210_CLK_GPIO>; + resets = <&sysrst K210_RST_GPIO>; + status = "disabled"; + + gpio1_0: gpio1@0 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + interrupt-controller; + interrupts = <23>; + gpio-controller; + snps,nr-gpios = <8>; + }; + }; + + uart1: serial@50210000 { + compatible = "kendryte,k210-uart", + "snps,dw-apb-uart"; + reg = <0x50210000 0x100>; + interrupts = <11>; + clocks = <&sysclk K210_CLK_UART1>; + resets = <&sysrst K210_RST_UART1>; + reg-io-width = <4>; + reg-shift = <2>; + dcd-override; + dsr-override; + cts-override; + ri-override; + status = "disabled"; + }; + + uart2: serial@50220000 { + compatible = "kendryte,k210-uart", + "snps,dw-apb-uart"; + reg = <0x50220000 0x100>; + interrupts = <12>; + clocks = <&sysclk K210_CLK_UART2>; + resets = <&sysrst K210_RST_UART2>; + reg-io-width = <4>; + reg-shift = <2>; + dcd-override; + dsr-override; + cts-override; + ri-override; + status = "disabled"; + }; + + uart3: serial@50230000 { + compatible = "kendryte,k210-uart", + "snps,dw-apb-uart"; + reg = <0x50230000 0x100>; + interrupts = <13>; + clocks = <&sysclk K210_CLK_UART3>; + resets = <&sysrst K210_RST_UART3>; + reg-io-width = <4>; + reg-shift = <2>; + dcd-override; + dsr-override; + cts-override; + ri-override; + status = "disabled"; + }; + + spi2: spi@50240000 { + compatible = "kendryte,k120-spislave", + "snps,dw-apb-ssi"; + spi-slave; + reg = <0x50240000 0x100>; + interrupts = <2>; + clocks = <&sysclk K210_CLK_SPI2>; + resets = <&sysrst K210_RST_SPI2>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + i2s0: i2s@50250000 { + compatible = "kendryte,k210-i2s", + "snps,designware-i2s"; + reg = <0x50250000 0x200>; + interrupts = <5>; + clocks = <&sysclk K210_CLK_I2S0>; + clock-names = "i2sclk"; + resets = <&sysrst K210_RST_I2S0>; + status = "disabled"; + }; + + apu0: sound@520250200 { + compatible = "kendryte,k210-apu"; + reg = <0x50250200 0x200>; + status = "disabled"; + }; + + i2s1: i2s@50260000 { + compatible = "kendryte,k210-i2s", + "snps,designware-i2s"; + reg = <0x50260000 0x200>; + interrupts = <6>; + clocks = <&sysclk K210_CLK_I2S1>; + clock-names = "i2sclk"; + resets = <&sysrst K210_RST_I2S1>; + status = "disabled"; + }; + + i2s2: i2s@50270000 { + compatible = "kendryte,k210-i2s", + "snps,designware-i2s"; + reg = <0x50270000 0x200>; + interrupts = <7>; + clocks = <&sysclk K210_CLK_I2S2>; + clock-names = "i2sclk"; + resets = <&sysrst K210_RST_I2S2>; + status = "disabled"; + }; + + i2c0: i2c@50280000 { + compatible = "kendryte,k210-i2c", + "snps,designware-i2c"; + reg = <0x50280000 0x100>; + interrupts = <8>; + clocks = <&sysclk K210_CLK_I2C0>; + resets = <&sysrst K210_RST_I2C0>; + status = "disabled"; + }; + + i2c1: i2c@50290000 { + compatible = "kendryte,k210-i2c", + "snps,designware-i2c"; + reg = <0x50290000 0x100>; + interrupts = <9>; + clocks = <&sysclk K210_CLK_I2C1>; + resets = <&sysrst K210_RST_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@502A0000 { + compatible = "kendryte,k210-i2c", + "snps,designware-i2c"; + reg = <0x502A0000 0x100>; + interrupts = <10>; + clocks = <&sysclk K210_CLK_I2C2>; + resets = <&sysrst K210_RST_I2C2>; + status = "disabled"; + }; + + fpioa: pinmux@502B0000 { + compatible = "kendryte,k210-fpioa"; + reg = <0x502B0000 0x100>; + clocks = <&sysclk K210_CLK_FPIOA>; + resets = <&sysrst K210_RST_FPIOA>; + status = "disabled"; + }; + + sha256: sha256@502C0000 { + compatible = "kendryte,k210-sha256"; + reg = <0x502C0000 0x100>; + clocks = <&sysclk K210_CLK_SHA>; + resets = <&sysrst K210_RST_SHA>; + status = "disabled"; + }; + + timer0: timer@502D0000 { + compatible = "kendryte,k210-timer", + "snps,dw-apb-timer"; + reg = <0x502D0000 0x100>; + interrupts = <14 15>; + clocks = <&sysclk K210_CLK_TIMER0>; + clock-names = "timer"; + resets = <&sysrst K210_RST_TIMER0>; + status = "disabled"; + }; + + timer1: timer@502E0000 { + compatible = "kendryte,k210-timer", + "snps,dw-apb-timer"; + reg = <0x502E0000 0x100>; + interrupts = <16 17>; + clocks = <&sysclk K210_CLK_TIMER1>; + clock-names = "timer"; + resets = <&sysrst K210_RST_TIMER1>; + status = "disabled"; + }; + + timer2: timer@502F0000 { + compatible = "kendryte,k210-timer", + "snps,dw-apb-timer"; + reg = <0x502F0000 0x100>; + interrupts = <18 19>; + clocks = <&sysclk K210_CLK_TIMER2>; + clock-names = "timer"; + resets = <&sysrst K210_RST_TIMER2>; + status = "disabled"; + }; + }; + + apb1: bus@50400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-apb", "simple-pm-bus"; + ranges; + clocks = <&sysclk K210_CLK_APB1>; + + wdt0: watchdog@50400000 { + compatible = "kendryte,k210-wdt", "snps,dw-wdt"; + reg = <0x50400000 0x100>; + interrupts = <21>; + clocks = <&sysclk K210_CLK_WDT0>; + resets = <&sysrst K210_RST_WDT0>; + status = "disabled"; + }; + + wdt1: watchdog@50410000 { + compatible = "kendryte,k210-wdt", "snps,dw-wdt"; + reg = <0x50410000 0x100>; + interrupts = <22>; + clocks = <&sysclk K210_CLK_WDT1>; + resets = <&sysrst K210_RST_WDT1>; + status = "disabled"; + }; + + otp0: nvmem@50420000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-otp"; + reg = <0x50420000 0x100>, + <0x88000000 0x20000>; + reg-names = "reg", "mem"; + clocks = <&sysclk K210_CLK_ROM>; + resets = <&sysrst K210_RST_ROM>; + read-only; + status = "disabled"; + + /* Bootloader */ + firmware@00000 { + reg = <0x00000 0xC200>; + }; + + /* + * config string as described in RISC-V + * privileged spec 1.9 + */ + config-1-9@1c000 { + reg = <0x1C000 0x1000>; + }; + + /* + * Device tree containing only registers, + * interrupts, and cpus + */ + fdt@1d000 { + reg = <0x1D000 0x2000>; + }; + + /* CPU/ROM credits */ + credits@1f000 { + reg = <0x1F000 0x1000>; + }; + }; + + dvp0: camera@50430000 { + compatible = "kendryte,k210-dvp"; + reg = <0x50430000 0x100>; + interrupts = <24>; + clocks = <&sysclk K210_CLK_DVP>; + resets = <&sysrst K210_RST_DVP>; + status = "disabled"; + }; + + sysctl: syscon@50440000 { + compatible = "kendryte,k210-sysctl", + "syscon", "simple-mfd"; + reg = <0x50440000 0x100>; + reg-io-width = <4>; + + sysclk: clock-controller { + #clock-cells = <1>; + compatible = "kendryte,k210-clk"; + clocks = <&in0>; + }; + + sysrst: reset-controller { + compatible = "kendryte,k210-rst", + "syscon-reset"; + #reset-cells = <1>; + regmap = <&sysctl>; + offset = <K210_SYSCTL_PERI_RESET>; + mask = <0x27FFFFFF>; + assert-high = <1>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&sysctl>; + offset = <K210_SYSCTL_SOFT_RESET>; + mask = <1>; + value = <1>; + }; + }; + + aes0: aes@50450000 { + compatible = "kendryte,k210-aes"; + reg = <0x50450000 0x100>; + clocks = <&sysclk K210_CLK_AES>; + resets = <&sysrst K210_RST_AES>; + status = "disabled"; + }; + + rtc: rtc@50460000 { + compatible = "kendryte,k210-rtc"; + reg = <0x50460000 0x100>; + clocks = <&in0>; + resets = <&sysrst K210_RST_RTC>; + interrupts = <20>; + status = "disabled"; + }; + }; + + apb2: bus@52000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-apb", "simple-pm-bus"; + ranges; + clocks = <&sysclk K210_CLK_APB2>; + + spi0: spi@52000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "kendryte,k210-spi", + "snps,dw-apb-ssi"; + reg = <0x52000000 0x100>; + interrupts = <1>; + clocks = <&sysclk K210_CLK_SPI0>; + clock-names = "ssi_clk"; + resets = <&sysrst K210_RST_SPI0>; + spi-max-frequency = <25000000>; + num-cs = <4>; + reg-io-width = <4>; + status = "disabled"; + }; + + spi1: spi@53000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "kendryte,k210-spi", + "snps,dw-apb-ssi"; + reg = <0x53000000 0x100>; + interrupts = <2>; + clocks = <&sysclk K210_CLK_SPI1>; + clock-names = "ssi_clk"; + resets = <&sysrst K210_RST_SPI1>; + spi-max-frequency = <25000000>; + num-cs = <4>; + reg-io-width = <4>; + status = "disabled"; + }; + + spi3: spi@54000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "kendryte,k210-spi", + "snps,dw-apb-ssi"; + reg = <0x54000000 0x200>; + interrupts = <4>; + clocks = <&sysclk K210_CLK_SPI3>; + clock-names = "ssi_clk"; + resets = <&sysrst K210_RST_SPI3>; + /* Could possibly go up to 200 MHz */ + spi-max-frequency = <100000000>; + num-cs = <4>; + reg-io-width = <4>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h index d1520743a2..1a15089cae 100644 --- a/arch/riscv/include/asm/csr.h +++ b/arch/riscv/include/asm/csr.h @@ -15,7 +15,11 @@ #define SR_SIE _AC(0x00000002, UL) /* Supervisor Interrupt Enable */ #define SR_SPIE _AC(0x00000020, UL) /* Previous Supervisor IE */ #define SR_SPP _AC(0x00000100, UL) /* Previously Supervisor */ +#ifdef CONFIG_RISCV_PRIV_1_9 +#define SR_PUM _AC(0x00040000, UL) /* Protect User Memory Access */ +#else #define SR_SUM _AC(0x00040000, UL) /* Supervisor User Memory Access */ +#endif #define SR_FS _AC(0x00006000, UL) /* Floating-point Status */ #define SR_FS_OFF _AC(0x00000000, UL) @@ -29,6 +33,22 @@ #define SR_XS_CLEAN _AC(0x00010000, UL) #define SR_XS_DIRTY _AC(0x00018000, UL) +#ifdef CONFIG_RISCV_PRIV_1_9 +#define SR_VM _AC(0x1F000000, UL) /* Virtualization Management */ +#define SR_VM_MODE_BARE _AC(0x00000000, UL) /* No translation or protection */ +#define SR_VM_MODE_BB _AC(0x01000000, UL) /* Single base-and-bound */ +/* Separate instruction and data base-and-bound */ +#define SR_VM_MODE_BBID _AC(0x02000000, UL) +#ifndef CONFIG_64BIT +#define SR_VM_MODE_32 _AC(0x08000000, UL) +#define SR_VM_MODE SR_VM_MODE_32 +#else +#define SR_VM_MODE_39 _AC(0x09000000, UL) +#define SR_VM_MODE_48 _AC(0x0A000000, UL) +#define SR_VM_MODE SR_VM_MODE_39 +#endif +#endif + #ifndef CONFIG_64BIT #define SR_SD _AC(0x80000000, UL) /* FS/XS dirty */ #else @@ -36,6 +56,7 @@ #endif /* SATP flags */ +#ifndef CONFIG_RISCV_PRIV_1_9 #ifndef CONFIG_64BIT #define SATP_PPN _AC(0x003FFFFF, UL) #define SATP_MODE_32 _AC(0x80000000, UL) @@ -45,6 +66,7 @@ #define SATP_MODE_39 _AC(0x8000000000000000, UL) #define SATP_MODE SATP_MODE_39 #endif +#endif /* SCAUSE */ #define SCAUSE_IRQ_FLAG (_AC(1, UL) << (__riscv_xlen - 1)) @@ -88,17 +110,35 @@ #define CSR_SCAUSE 0x142 #define CSR_STVAL 0x143 #define CSR_SIP 0x144 +#ifdef CONFIG_RISCV_PRIV_1_9 +#define CSR_SPTBR 0x180 +#else #define CSR_SATP 0x180 +#endif #define CSR_MSTATUS 0x300 #define CSR_MISA 0x301 #define CSR_MIE 0x304 #define CSR_MTVEC 0x305 +#ifdef CONFIG_RISCV_PRIV_1_9 +#define CSR_MUCOUNTEREN 0x320 +#define CSR_MSCOUNTEREN 0x321 +#define CSR_MHCOUNTEREN 0x322 +#else #define CSR_MCOUNTEREN 0x306 +#endif #define CSR_MSCRATCH 0x340 #define CSR_MEPC 0x341 #define CSR_MCAUSE 0x342 #define CSR_MTVAL 0x343 #define CSR_MIP 0x344 +#ifdef CONFIG_RISCV_PRIV_1_9 +#define CSR_MBASE 0x380 +#define CSR_MBOUND 0x381 +#define CSR_MIBASE 0x382 +#define CSR_MIBOUND 0x383 +#define CSR_MDBASE 0x384 +#define CSR_MDBOUND 0x385 +#endif #define CSR_CYCLEH 0xc80 #define CSR_TIMEH 0xc81 #define CSR_INSTRETH 0xc82 diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h index 6c50149218..2eb14815bc 100644 --- a/arch/riscv/include/asm/global_data.h +++ b/arch/riscv/include/asm/global_data.h @@ -11,6 +11,8 @@ #define __ASM_GBL_DATA_H #include <asm/smp.h> +#include <asm/u-boot.h> +#include <compiler.h> /* Architecture-specific global data */ struct arch_global_data { diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h index 74de92ed13..1b428856b2 100644 --- a/arch/riscv/include/asm/smp.h +++ b/arch/riscv/include/asm/smp.h @@ -51,4 +51,47 @@ void handle_ipi(ulong hart); */ int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait); +/** + * riscv_init_ipi() - Initialize inter-process interrupt (IPI) driver + * + * Platform code must provide this function. This function is called once after + * the cpu driver is initialized. No other riscv_*_ipi() calls will be made + * before this function is called. + * + * @return 0 if OK, -ve on error + */ +int riscv_init_ipi(void); + +/** + * riscv_send_ipi() - Send inter-processor interrupt (IPI) + * + * Platform code must provide this function. + * + * @hart: Hart ID of receiving hart + * @return 0 if OK, -ve on error + */ +int riscv_send_ipi(int hart); + +/** + * riscv_clear_ipi() - Clear inter-processor interrupt (IPI) + * + * Platform code must provide this function. + * + * @hart: Hart ID of hart to be cleared + * @return 0 if OK, -ve on error + */ +int riscv_clear_ipi(int hart); + +/** + * riscv_get_ipi() - Get status of inter-processor interrupt (IPI) + * + * Platform code must provide this function. + * + * @hart: Hart ID of hart to be checked + * @pending: Pointer to variable with result of the check, + * 1 if IPI is pending, 0 otherwise + * @return 0 if OK, -ve on error + */ +int riscv_get_ipi(int hart, int *pending); + #endif diff --git a/arch/riscv/include/asm/u-boot.h b/arch/riscv/include/asm/u-boot.h index 5ba8e77812..d5e1d5f323 100644 --- a/arch/riscv/include/asm/u-boot.h +++ b/arch/riscv/include/asm/u-boot.h @@ -18,25 +18,10 @@ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 +/* Use the generic board which requires a unified bd_info */ +#include <asm-generic/u-boot.h> #include <asm/u-boot-riscv.h> - -typedef struct bd_info { - unsigned long bi_boot_params; /* where this board expects params */ - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned char bi_enetaddr[6]; - - struct /* RAM configuration */ - { - unsigned long start; - unsigned long size; - } bi_dram[CONFIG_NR_DRAM_BANKS]; -} bd_t; - /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_RISCV diff --git a/arch/riscv/lib/andes_plic.c b/arch/riscv/lib/andes_plic.c index 20529ab3eb..5cf29df670 100644 --- a/arch/riscv/lib/andes_plic.c +++ b/arch/riscv/lib/andes_plic.c @@ -30,20 +30,6 @@ #define SEND_IPI_TO_HART(hart) (0x80 >> (hart)) DECLARE_GLOBAL_DATA_PTR; -static int init_plic(void); - -#define PLIC_BASE_GET(void) \ - do { \ - long *ret; \ - \ - if (!gd->arch.plic) { \ - ret = syscon_get_first_range(RISCV_SYSCON_PLIC); \ - if (IS_ERR(ret)) \ - return PTR_ERR(ret); \ - gd->arch.plic = ret; \ - init_plic(); \ - } \ - } while (0) static int enable_ipi(int hart) { @@ -93,13 +79,21 @@ static int init_plic(void) return -ENODEV; } -int riscv_send_ipi(int hart) +int riscv_init_ipi(void) { - unsigned int ipi; + long *ret = syscon_get_first_range(RISCV_SYSCON_PLIC); + + if (IS_ERR(ret)) + return PTR_ERR(ret); + gd->arch.plic = ret; + + return init_plic(); +} - PLIC_BASE_GET(); +int riscv_send_ipi(int hart) +{ + unsigned int ipi = (SEND_IPI_TO_HART(hart) << (8 * gd->arch.boot_hart)); - ipi = (SEND_IPI_TO_HART(hart) << (8 * gd->arch.boot_hart)); writel(ipi, (void __iomem *)PENDING_REG(gd->arch.plic, gd->arch.boot_hart)); @@ -110,8 +104,6 @@ int riscv_clear_ipi(int hart) { u32 source_id; - PLIC_BASE_GET(); - source_id = readl((void __iomem *)CLAIM_REG(gd->arch.plic, hart)); writel(source_id, (void __iomem *)CLAIM_REG(gd->arch.plic, hart)); @@ -120,8 +112,6 @@ int riscv_clear_ipi(int hart) int riscv_get_ipi(int hart, int *pending) { - PLIC_BASE_GET(); - *pending = readl((void __iomem *)PENDING_REG(gd->arch.plic, gd->arch.boot_hart)); *pending = !!(*pending & SEND_IPI_TO_HART(hart)); diff --git a/arch/riscv/lib/reset.c b/arch/riscv/lib/reset.c index 8779c619cc..6008bbe78e 100644 --- a/arch/riscv/lib/reset.c +++ b/arch/riscv/lib/reset.c @@ -7,6 +7,7 @@ #include <command.h> #include <hang.h> +#ifndef CONFIG_SYSRESET int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { printf("resetting ...\n"); @@ -16,3 +17,4 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) return 0; } +#endif diff --git a/arch/riscv/lib/sbi_ipi.c b/arch/riscv/lib/sbi_ipi.c index abafca9e5c..d02e2b4c48 100644 --- a/arch/riscv/lib/sbi_ipi.c +++ b/arch/riscv/lib/sbi_ipi.c @@ -8,6 +8,11 @@ #include <asm/encoding.h> #include <asm/sbi.h> +int riscv_init_ipi(void) +{ + return 0; +} + int riscv_send_ipi(int hart) { ulong mask; diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c index 5e0d25720b..78fc6c868d 100644 --- a/arch/riscv/lib/sifive_clint.c +++ b/arch/riscv/lib/sifive_clint.c @@ -24,22 +24,8 @@ DECLARE_GLOBAL_DATA_PTR; -#define CLINT_BASE_GET(void) \ - do { \ - long *ret; \ - \ - if (!gd->arch.clint) { \ - ret = syscon_get_first_range(RISCV_SYSCON_CLINT); \ - if (IS_ERR(ret)) \ - return PTR_ERR(ret); \ - gd->arch.clint = ret; \ - } \ - } while (0) - int riscv_get_time(u64 *time) { - CLINT_BASE_GET(); - *time = readq((void __iomem *)MTIME_REG(gd->arch.clint)); return 0; @@ -47,17 +33,24 @@ int riscv_get_time(u64 *time) int riscv_set_timecmp(int hart, u64 cmp) { - CLINT_BASE_GET(); - writeq(cmp, (void __iomem *)MTIMECMP_REG(gd->arch.clint, hart)); return 0; } -int riscv_send_ipi(int hart) +int riscv_init_ipi(void) { - CLINT_BASE_GET(); + long *ret = syscon_get_first_range(RISCV_SYSCON_CLINT); + + if (IS_ERR(ret)) + return PTR_ERR(ret); + gd->arch.clint = ret; + + return 0; +} +int riscv_send_ipi(int hart) +{ writel(1, (void __iomem *)MSIP_REG(gd->arch.clint, hart)); return 0; @@ -65,8 +58,6 @@ int riscv_send_ipi(int hart) int riscv_clear_ipi(int hart) { - CLINT_BASE_GET(); - writel(0, (void __iomem *)MSIP_REG(gd->arch.clint, hart)); return 0; @@ -74,8 +65,6 @@ int riscv_clear_ipi(int hart) int riscv_get_ipi(int hart, int *pending) { - CLINT_BASE_GET(); - *pending = readl((void __iomem *)MSIP_REG(gd->arch.clint, hart)); return 0; diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c index 17adb35730..ac22136314 100644 --- a/arch/riscv/lib/smp.c +++ b/arch/riscv/lib/smp.c @@ -12,38 +12,6 @@ DECLARE_GLOBAL_DATA_PTR; -/** - * riscv_send_ipi() - Send inter-processor interrupt (IPI) - * - * Platform code must provide this function. - * - * @hart: Hart ID of receiving hart - * @return 0 if OK, -ve on error - */ -extern int riscv_send_ipi(int hart); - -/** - * riscv_clear_ipi() - Clear inter-processor interrupt (IPI) - * - * Platform code must provide this function. - * - * @hart: Hart ID of hart to be cleared - * @return 0 if OK, -ve on error - */ -extern int riscv_clear_ipi(int hart); - -/** - * riscv_get_ipi() - Get status of inter-processor interrupt (IPI) - * - * Platform code must provide this function. - * - * @hart: Hart ID of hart to be checked - * @pending: Pointer to variable with result of the check, - * 1 if IPI is pending, 0 otherwise - * @return 0 if OK, -ve on error - */ -extern int riscv_get_ipi(int hart, int *pending); - static int send_ipi_many(struct ipi_data *ipi, int wait) { ofnode node, cpus; @@ -124,7 +92,7 @@ void handle_ipi(ulong hart) */ ret = riscv_clear_ipi(hart); if (ret) { - pr_err("Cannot clear IPI of hart %ld\n", hart); + pr_err("Cannot clear IPI of hart %ld (error %d)\n", hart, ret); return; } @@ -133,14 +101,11 @@ void handle_ipi(ulong hart) int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait) { - int ret = 0; - struct ipi_data ipi; - - ipi.addr = addr; - ipi.arg0 = arg0; - ipi.arg1 = arg1; - - ret = send_ipi_many(&ipi, wait); + struct ipi_data ipi = { + .addr = addr, + .arg0 = arg0, + .arg1 = arg1, + }; - return ret; + return send_ipi_many(&ipi, wait); } diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 24bb3ce36f..07535a6b7d 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -23,8 +23,8 @@ pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; - remoteproc1 = &rproc_1; - remoteproc2 = &rproc_2; + remoteproc0 = &rproc_1; + remoteproc1 = &rproc_2; rtc0 = &rtc_0; rtc1 = &rtc_1; spi0 = "/spi@0"; @@ -830,6 +830,8 @@ hub { compatible = "usb-hub"; usb,device-class = <9>; + #address-cells = <1>; + #size-cells = <0>; hub-emul { compatible = "sandbox,usb-hub"; #address-cells = <1>; @@ -858,6 +860,13 @@ }; }; + + usbstor@1 { + reg = <1>; + }; + usbstor@3 { + reg = <3>; + }; }; }; @@ -1049,6 +1058,27 @@ mdio: mdio-test { compatible = "sandbox,mdio"; }; + + pm-bus-test { + compatible = "simple-pm-bus"; + clocks = <&clk_sandbox 4>; + power-domains = <&pwrdom 1>; + }; + + resetc2: syscon-reset { + compatible = "syscon-reset"; + #reset-cells = <1>; + regmap = <&syscon0>; + offset = <1>; + mask = <0x27FFFFFF>; + assert-high = <0>; + }; + + syscon-reset-test { + compatible = "sandbox,misc_sandbox"; + resets = <&resetc2 15>, <&resetc2 30>, <&resetc2 60>; + reset-names = "valid", "no_mask", "out_of_range"; + }; }; #include "sandbox_pmic.dtsi" diff --git a/arch/sandbox/include/asm/clk.h b/arch/sandbox/include/asm/clk.h index 1573e4a134..c184c4bffc 100644 --- a/arch/sandbox/include/asm/clk.h +++ b/arch/sandbox/include/asm/clk.h @@ -21,6 +21,7 @@ enum sandbox_clk_id { SANDBOX_CLK_ID_I2C, SANDBOX_CLK_ID_UART1, SANDBOX_CLK_ID_UART2, + SANDBOX_CLK_ID_BUS, SANDBOX_CLK_ID_COUNT, }; diff --git a/arch/sh/config.mk b/arch/sh/config.mk index 85dab383e7..78bb2660e1 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -3,10 +3,6 @@ # (C) Copyright 2000-2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := sh4-linux- -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000 ifeq ($(CPU),sh2) LDFLAGS_STANDALONE += -EB diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile index 3aa2a55676..11621256ae 100644 --- a/arch/x86/cpu/apollolake/Makefile +++ b/arch/x86/cpu/apollolake/Makefile @@ -3,7 +3,6 @@ # Copyright 2019 Google LLC obj-$(CONFIG_SPL_BUILD) += cpu_spl.o -obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SPL_BUILD) += systemagent.o obj-y += cpu_common.o @@ -12,6 +11,7 @@ obj-y += cpu.o obj-y += punit.o obj-y += fsp_bindings.o ifdef CONFIG_SPL_BUILD +obj-y += spl.o obj-y += fsp_m.o endif endif diff --git a/arch/x86/cpu/config.mk b/arch/x86/cpu/config.mk index 8f9814c0ae..d3033b4160 100644 --- a/arch/x86/cpu/config.mk +++ b/arch/x86/cpu/config.mk @@ -3,8 +3,6 @@ # (C) Copyright 2002 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se. -CROSS_COMPILE ?= i386-linux- - # DO NOT MODIFY THE FOLLOWING UNLESS YOU REALLY KNOW WHAT YOU ARE DOING! LDPPFLAGS += -DRESET_SEG_START=$(CONFIG_RESET_SEG_START) LDPPFLAGS += -DRESET_VEC_LOC=$(CONFIG_RESET_VEC_LOC) diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index 4ca0f79bff..14f811fc36 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -23,7 +23,7 @@ typedef struct { volatile int counter; } atomic_t; */ static inline int atomic_read(const atomic_t *v) { - return ACCESS_ONCE((v)->counter); + return READ_ONCE((v)->counter); } /** diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 5cd4587480..1079bf2022 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -22,7 +22,6 @@ obj-y += init_helpers.o obj-y += interrupts.o obj-y += lpc-uclass.o obj-y += mpspec.o -obj-$(CONFIG_ENABLE_MRC_CACHE) += mrccache.o obj-y += northbridge-uclass.o obj-$(CONFIG_I8259_PIC) += i8259.o obj-$(CONFIG_I8254_TIMER) += i8254.o @@ -45,9 +44,12 @@ ifndef CONFIG_SPL_BUILD obj-$(CONFIG_CMD_ZBOOT) += zimage.o endif obj-$(CONFIG_USE_HOB) += hob.o +ifndef CONFIG_TPL_BUILD +obj-$(CONFIG_ENABLE_MRC_CACHE) += mrccache.o obj-$(CONFIG_HAVE_FSP) += fsp/ obj-$(CONFIG_FSP_VERSION1) += fsp1/ obj-$(CONFIG_FSP_VERSION2) += fsp2/ +endif ifdef CONFIG_SPL_BUILD ifdef CONFIG_TPL_BUILD diff --git a/arch/x86/lib/fsp/fsp_graphics.c b/arch/x86/lib/fsp/fsp_graphics.c index 70224c1a48..6e23f3c95f 100644 --- a/arch/x86/lib/fsp/fsp_graphics.c +++ b/arch/x86/lib/fsp/fsp_graphics.c @@ -98,6 +98,7 @@ static int fsp_video_probe(struct udevice *dev) * For IGD, it seems to be always on BAR2. */ vesa->phys_base_ptr = dm_pci_read_bar32(dev, 2); + gd->fb_base = vesa->phys_base_ptr; ret = vbe_setup_video_priv(vesa, uc_priv, plat); if (ret) @@ -106,8 +107,8 @@ static int fsp_video_probe(struct udevice *dev) mtrr_add_request(MTRR_TYPE_WRCOMB, vesa->phys_base_ptr, 256 << 20); mtrr_commit(true); - printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize, - vesa->bits_per_pixel); + printf("%dx%dx%d @ %x\n", uc_priv->xsize, uc_priv->ysize, + vesa->bits_per_pixel, vesa->phys_base_ptr); return 0; diff --git a/arch/xtensa/config.mk b/arch/xtensa/config.mk index ec37107862..b0809999e4 100644 --- a/arch/xtensa/config.mk +++ b/arch/xtensa/config.mk @@ -3,7 +3,6 @@ # (C) Copyright 2007 - 2013 Tensilica, Inc. # (C) Copyright 2014 - 2016 Cadence Design Systems Inc. -CROSS_COMPILE ?= xtensa-linux- PLATFORM_CPPFLAGS += -D__XTENSA__ -mlongcalls -mforce-no-pic \ -ffunction-sections -fdata-sections |