diff options
Diffstat (limited to 'arch/nios2/lib/longlong.h')
| -rw-r--r-- | arch/nios2/lib/longlong.h | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/arch/nios2/lib/longlong.h b/arch/nios2/lib/longlong.h new file mode 100644 index 0000000000..392f7e72d3 --- /dev/null +++ b/arch/nios2/lib/longlong.h @@ -0,0 +1,263 @@ +/* longlong.h -- definitions for mixed size 32/64 bit arithmetic. + Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2004, + 2005 Free Software Foundation, Inc. + + This definition file is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2, or (at your option) any later version. + + This definition file is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* You have to define the following before including this file: + + UWtype -- An unsigned type, default type for operations (typically a "word") + UHWtype -- An unsigned type, at least half the size of UWtype. + UDWtype -- An unsigned type, at least twice as large a UWtype + W_TYPE_SIZE -- size in bits of UWtype + + UQItype -- Unsigned 8 bit type. + SItype, USItype -- Signed and unsigned 32 bit types. + DItype, UDItype -- Signed and unsigned 64 bit types. + + On a 32 bit machine UWtype should typically be USItype; + on a 64 bit machine, UWtype should typically be UDItype. */ + +#define __BITS4 (W_TYPE_SIZE / 4) +#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) + +#ifndef W_TYPE_SIZE +#define W_TYPE_SIZE 32 +#define UWtype USItype +#define UHWtype USItype +#define UDWtype UDItype +#endif + +extern const UQItype __clz_tab[256]; + +/* Define auxiliary asm macros. + + 1) umul_ppmm(high_prod, low_prod, multiplier, multiplicand) multiplies two + UWtype integers MULTIPLIER and MULTIPLICAND, and generates a two UWtype + word product in HIGH_PROD and LOW_PROD. + + 2) __umulsidi3(a,b) multiplies two UWtype integers A and B, and returns a + UDWtype product. This is just a variant of umul_ppmm. + + 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, + denominator) divides a UDWtype, composed by the UWtype integers + HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient + in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less + than DENOMINATOR for correct operation. If, in addition, the most + significant bit of DENOMINATOR must be 1, then the pre-processor symbol + UDIV_NEEDS_NORMALIZATION is defined to 1. + + 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator, + denominator). Like udiv_qrnnd but the numbers are signed. The quotient + is rounded towards 0. + + 5) count_leading_zeros(count, x) counts the number of zero-bits from the + msb to the first nonzero bit in the UWtype X. This is the number of + steps X needs to be shifted left to set the msb. Undefined for X == 0, + unless the symbol COUNT_LEADING_ZEROS_0 is defined to some value. + + 6) count_trailing_zeros(count, x) like count_leading_zeros, but counts + from the least significant end. + + 7) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, + high_addend_2, low_addend_2) adds two UWtype integers, composed by + HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2 + respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow + (i.e. carry out) is not stored anywhere, and is lost. + + 8) sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend, + high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers, + composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and + LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE + and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, + and is lost. + + If any of these macros are left undefined for a particular CPU, + C macros are used. */ + +/* The CPUs come in alphabetical order below. + + Please add support for more CPUs here, or improve the current support + for the CPUs below! + (E.g. WE32100, IBM360.) */ + +/* Snipped per CPU support */ + +/* If this machine has no inline assembler, use C macros. */ + +#if !defined (add_ssaaaa) +#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ + do { \ + UWtype __x; \ + __x = (al) + (bl); \ + (sh) = (ah) + (bh) + (__x < (al)); \ + (sl) = __x; \ + } while (0) +#endif + +#if !defined (sub_ddmmss) +#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ + do { \ + UWtype __x; \ + __x = (al) - (bl); \ + (sh) = (ah) - (bh) - (__x > (al)); \ + (sl) = __x; \ + } while (0) +#endif + +/* If we lack umul_ppmm but have smul_ppmm, define umul_ppmm in terms of + smul_ppmm. */ +#if !defined (umul_ppmm) && defined (smul_ppmm) +#define umul_ppmm(w1, w0, u, v) \ + do { \ + UWtype __w1; \ + UWtype __xm0 = (u), __xm1 = (v); \ + smul_ppmm (__w1, w0, __xm0, __xm1); \ + (w1) = __w1 + (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1) \ + + (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0); \ + } while (0) +#endif + +/* If we still don't have umul_ppmm, define it using plain C. */ +#if !defined (umul_ppmm) +#define umul_ppmm(w1, w0, u, v) \ + do { \ + UWtype __x0, __x1, __x2, __x3; \ + UHWtype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (UWtype) __ul * __vl; \ + __x1 = (UWtype) __ul * __vh; \ + __x2 = (UWtype) __uh * __vl; \ + __x3 = (UWtype) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ + } while (0) +#endif + +#if !defined (__umulsidi3) +#define __umulsidi3(u, v) \ + ({DWunion __w; \ + umul_ppmm (__w.s.high, __w.s.low, u, v); \ + __w.ll; }) +#endif + +/* Define this unconditionally, so it can be used for debugging. */ +#define __udiv_qrnnd_c(q, r, n1, n0, d) \ + do { \ + UWtype __d1, __d0, __q1, __q0; \ + UWtype __r1, __r0, __m; \ + __d1 = __ll_highpart (d); \ + __d0 = __ll_lowpart (d); \ + \ + __r1 = (n1) % __d1; \ + __q1 = (n1) / __d1; \ + __m = (UWtype) __q1 * __d0; \ + __r1 = __r1 * __ll_B | __ll_highpart (n0); \ + if (__r1 < __m) \ + { \ + __q1--, __r1 += (d); \ + if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ + if (__r1 < __m) \ + __q1--, __r1 += (d); \ + } \ + __r1 -= __m; \ + \ + __r0 = __r1 % __d1; \ + __q0 = __r1 / __d1; \ + __m = (UWtype) __q0 * __d0; \ + __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ + if (__r0 < __m) \ + { \ + __q0--, __r0 += (d); \ + if (__r0 >= (d)) \ + if (__r0 < __m) \ + __q0--, __r0 += (d); \ + } \ + __r0 -= __m; \ + \ + (q) = (UWtype) __q1 * __ll_B | __q0; \ + (r) = __r0; \ + } while (0) + +/* If the processor has no udiv_qrnnd but sdiv_qrnnd, go through + __udiv_w_sdiv (defined in libgcc or elsewhere). */ +#if !defined (udiv_qrnnd) && defined (sdiv_qrnnd) +#define udiv_qrnnd(q, r, nh, nl, d) \ + do { \ + USItype __r; \ + (q) = __udiv_w_sdiv (&__r, nh, nl, d); \ + (r) = __r; \ + } while (0) +#endif + +/* If udiv_qrnnd was not defined for this processor, use __udiv_qrnnd_c. */ +#if !defined (udiv_qrnnd) +#define UDIV_NEEDS_NORMALIZATION 1 +#define udiv_qrnnd __udiv_qrnnd_c +#endif + +#if !defined (count_leading_zeros) +#define count_leading_zeros(count, x) \ + do { \ + UWtype __xr = (x); \ + UWtype __a; \ + \ + if (W_TYPE_SIZE <= 32) \ + { \ + __a = __xr < ((UWtype)1<<2*__BITS4) \ + ? (__xr < ((UWtype)1<<__BITS4) ? 0 : __BITS4) \ + : (__xr < ((UWtype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ + } \ + else \ + { \ + for (__a = W_TYPE_SIZE - 8; __a > 0; __a -= 8) \ + if (((__xr >> __a) & 0xff) != 0) \ + break; \ + } \ + \ + (count) = W_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \ + } while (0) +#define COUNT_LEADING_ZEROS_0 W_TYPE_SIZE +#endif + +#if !defined (count_trailing_zeros) +/* Define count_trailing_zeros using count_leading_zeros. The latter might be + defined in asm, but if it is not, the C version above is good enough. */ +#define count_trailing_zeros(count, x) \ + do { \ + UWtype __ctz_x = (x); \ + UWtype __ctz_c; \ + count_leading_zeros (__ctz_c, __ctz_x & -__ctz_x); \ + (count) = W_TYPE_SIZE - 1 - __ctz_c; \ + } while (0) +#endif + +#ifndef UDIV_NEEDS_NORMALIZATION +#define UDIV_NEEDS_NORMALIZATION 0 +#endif |