diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 754 |
1 files changed, 754 insertions, 0 deletions
@@ -1,3 +1,736 @@ +commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Fri Mar 13 11:40:10 2009 -0400 + + mpc83xx: Add bank configuration to FSL spd_sdram.c + + The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8 + bank SDRAMs. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Acked-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b581626c1e2474a3dadf69d4f0e0582eccbc4235 +Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl> +Date: Fri Mar 13 08:58:14 2009 +0100 + + mpc83xx: correctly set encryption and I2C bus 0 clock + + This patch makes sure the correct mask is applied when setting + the encryption and I2C bus 0 clock in SCCR. + Failing to do so may lead to ENCCM being 0 in which case I2C bus 0 + won't function. + + Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e6a6a704151c2d7e4a7b485545b48a6020ccca17 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Thu Mar 12 19:30:50 2009 +0100 + + OMAP3: Add support for OMAP3 die ID + + Read and store OMAP3 die ID in U-Boot environment. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit f949bd8d089ec3059c460ac829c0d919e1d7af0e +Author: Jon Smirl <jonsmirl@gmail.com> +Date: Wed Mar 11 15:08:56 2009 -0400 + + MPC5200 FEC MII speed register + + Set a non-zero speed in the MII register so that MII commands will work. + + Signed-off-by: Jon Smirl <jonsmirl@gmail.com> + +commit 94a353611b93ac4cb4434a5f7e98aa0902da919e +Author: Yusuke.Goda <goda.yusuke@renesas.com> +Date: Fri Mar 13 16:08:18 2009 +0900 + + sh: ap325rxa: Change the wait cycle in the area 5 + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Wed Feb 25 16:04:26 2009 +0900 + + sh: Fix cannot work rtl8139 on r2dplus + + The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory + registration. + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Fri Feb 27 18:35:41 2009 +0900 + + sh: Add netdev header fixing of warning/build + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit ada9318252f51c2626e9837c623f9812b0308dea +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Tue Mar 3 15:11:17 2009 +0900 + + sh: Add support 32-Bit Extended Address Mode to sh7785lcr + + We can built 'make sh7785lcr_32bit_config'. And add new command "pmb" + for this mode. This command changes PMB for using 512MB system memory. + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 06b18163b57e6b0349b0c299222d50e7b1e41e50 +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Wed Feb 25 14:26:42 2009 +0900 + + sh: Add some register value configurable to PCI of SH7780 + + Some register value was hardcoded for System memory size 128MB and + memory offset 0x08000000. This patch fixed the problem. + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Wed Feb 25 14:26:52 2009 +0900 + + sh: Add system memory registration to PCI for SH4 + + It is necessary for some pci device driver. + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit b3061b40db691245a7bb9a55354b4edacbf3902d +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Wed Feb 25 14:26:55 2009 +0900 + + sh: Add value for PCI system memory registration of sh7785lcr + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 6d84ae3956a6cd7aebd86f661130752594e60124 +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Tue Mar 3 15:11:08 2009 +0900 + + sh: Add macros for SH-4A 32-Bit Address Extended Mode + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Tue Feb 3 13:35:05 2009 +0900 + + sh: use write{8,16,32} in ms7720se lowlevel_init + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 0452352df118bc9dd684a056aaaa5fb4aed1178a +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Mon Mar 9 18:07:53 2009 -0500 + + tsec: report when there is no vendor specific PHY support + + Commit af1c2b84 added a generic phy support, with an ID of zero + and a 32 bit mask; meaning that it will match on any PHY ID. + + The problem is that there is a test that checked if a matching + PHY was found, and if not, it printed the non-matching ID. + But since there will always be a match (on the generic PHY, + worst case), this test will never trip. + + In the case of a misconfigured PHY address, or of a PHY that + isn't explicitly supported outside of the generic support, + you will never see the ID of 0xffffffff, or the ID of the + real (but unsupported) chip. It will silently fall through + onto the generic support. + + This change makes that test useful again, and ensures that + the selection of generic PHY support doesn't happen without + some sort of notice. It also makes it explicitly clear that + the generic PHY must be last in the PHY table. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit c279dfc10186ceba78d3862036f158750e86599a +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Mar 9 10:53:05 2009 +0100 + + SIMPC8313 board: fix out of tree building. + + Fix typo in makefile which broke out of tree builds. + + Also use expolicit "rm" instead of "ln -sf" which is known to be + unreliable. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 49b5aff491bd574935ecaf8545152066a25eff3d +Author: ksi@koi8.net <ksi@koi8.net> +Date: Mon Feb 23 10:53:13 2009 -0800 + + Add eTSEC 1/2 IO override control (corrected) + + This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.) + + Signed-off-by: Sergey Kubushyn <ksi@koi8.net> + +commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc +Author: Andy Fleming <afleming@freescale.com> +Date: Fri Mar 6 19:05:52 2009 -0600 + + fsl: Remove unnecessary debug printfs + + These were left in accidentally, and are not really useful unless the + code is as broken as it was when it was being developed. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Tue Feb 24 02:37:59 2009 -0600 + + Fix mpc85xx ddr-gen3 ddr_sdram_cfg. + + Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other + sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit a922fdb87af25c25c032424908dcf60fbf3250ea +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Tue Feb 24 06:13:10 2009 +0100 + + PXA: timer use do_div and simplify it + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Mar 9 10:51:39 2009 +0100 + + SIMPC8313 board: fix out of tree building. + + Fix typo in makefile which broke out of tree builds. + + Also use expolicit "rm" instead of "ln -sf" which is known to be + unreliable. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:51 2009 +0100 + + 8360, kmeter1: added bootcount feature. + + add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU. + + The bootcounter uses 8 bytes from the muram, + because no other memory was found on this + CPU for the bootcount feature. So we must + correct the muram size in DTS before booting + Linux. + + This feature is actual only implemented for + MPC8360, because not all 83xx CPU have qe, + and therefore no muram, which this feature + uses. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 1e7ed2565031e01abc18c713030a0a9829c07684 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:48 2009 +0100 + + 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 + + old code implemented the QE_ENET10 errata only for Silicon + Revision 2.0. New code reads now the Silicon Revision + register and sets dependend on the Silicon Revision the + values as advised in the QE_ENET10 errata. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 605f78e34a3f0103693b891f2573edd352e7d495 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:44 2009 +0100 + + 83xx, kmeter1: updates for 2009.03 + + - HRCW update + HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL + HRCWH_LALE_EARLY added + - DDR-SDRAM settings modified. This solves sporadically + problems with this memory. + - CS1 now 128 MB window size + - CS3 now 512 MB window size + - PRAM activated + - MTDPARTS_DEFAULT defined + - CONFIG_HOSTNAME added + - MONITOR_LEN now 384 KB + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 118cbe3c35c898f8d020b29d6dc180307cacf147 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:40 2009 +0100 + + 83xx, kmeter1: autodetect size of DDR II RAM + + it is possible that some board variants have different DDR II + RAM sizes. So we autodetect the size of the assembled RAM. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit c1bce4fff750d734b1fa7467eb08f93902c97ca6 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:37 2009 +0100 + + 83xx, i2c: add mux support for fsl_i2c + + This patch adds I2C mux support for the fsl_i2c driver. This + allows you to add "new" i2c busses, which are reached over + i2c muxes. For more infos, please look in the README and + search for CONFIG_I2C_MUX. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:34 2009 +0100 + + 83xx, kmeter1: add I2C, dtt, eeprom support + + This patch adds I2C support for the Keymile kmeter1 board. + It uses the First I2C Controller from the CPU, for + accessing 4 temperature sensors, an eeprom with IVM data + and the booteeprom over a pca9547 mux. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit db1d72afd77287bc8577210f3f71ab249dcf146f +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 24 11:30:30 2009 +0100 + + i2c, dtt: move dtt_init () to board_init_r () + + In case where a board not uses CONFIG_POST, it is not + necessary to init the DTTs when running from flash. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5b0055547f0246908b79cc300170d87380b69e18 +Author: Dave Liu <daveliu@freescale.com> +Date: Wed Feb 25 12:31:32 2009 +0800 + + 83xx: Fix some bugs in spd sdram code + + 1. RD_TO_PRE missed to add the AL, and need min 2 clocks for + tRTP according to DDR2 JEDEC spec. + 2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec. + 3. add the support of DDR2-533,667,800 DIMMs + 4. cpo + 5. make the AL to min to gain better performance. + + The Micron MT9HTF6472CHY-667D1 DIMMs test passed on + MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate. + + items 1, 2 and 5: + Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + + Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b7be63abec45858c044f0fbd6aeef524c4663f9b +Author: Valeriy Glushkov <gvv@lstec.com> +Date: Wed Feb 4 18:27:49 2009 +0200 + + MPC8349ITX: several config issues fixed + + The previous version rebooted forever with DDR bigger than 256MB. + Access the DS1339 RTC chip is on I2C1 bus. + Allow DHCP. + + Signed-off-by: Valeriy Glushkov <gvv@lstec.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:39 2009 +0300 + + mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal + + The SerDes initialization should be finished before negating the reset + signal according to the reference manual. This isn't an issue on real + hardware, but we'd better stick to the specifications anyway. + + Suggested-by: Liu Dave <DaveLiu@freescale.com> + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f +Author: Heiko Schocher <hs@denx.de> +Date: Wed Feb 25 12:28:32 2009 +0100 + + i2c, dtt: move dtt_init () to board_init_r () + + it is not necessary to init the DTTs so early, + so move this init to board_init_r (). + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 00cc5595a7caac8066b408774383a956c2e26797 +Author: Anatolij Gustschin <agust@denx.de> +Date: Wed Feb 25 20:28:13 2009 +0100 + + lcd: Fix compilation warning in common/lcd.c + + Fix following warning while compilation for mcc200 board: + + lcd.c: In function 'lcd_display_bitmap': + lcd.c:625: warning: unused variable 'cmap' + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Tue Feb 24 21:11:24 2009 +1100 + + Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb) + + Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb + + Signed-off-by: Graeme Russ <graeme.russ at gmail.com> + +commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 23 10:29:47 2009 -0500 + + smc911x: split out useful defines/functions into local header + + The smc911x driver has a lot of useful defines/functions which can be used + by pieces of code (such as example eeprom programmers). Rather than + forcing each place to duplicate these defines/functions, split them out + of the smdc911x driver into a local header. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + CC: Sascha Hauer <s.hauer@pengutronix.de> + CC: Guennadi Liakhovetski <lg@denx.de> + CC: Magnus Lilja <lilja.magnus@gmail.com> + CC: Ben Warren <biggerbadderben@gmail.com> + +commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Tue Feb 24 10:44:02 2009 +0100 + + ARM: add an "eet" variant of the imx31_phycore board + + The "eet" variant of the imx31_phycore board has an OLED display, using a + s6e63d6 display controller on the first SPI interface, using GPIO57 as a + chip-select for it. With this configuration you can display 256 colour BMP + images in 16-bit RGB (RGB565) LCD mode. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Fri Feb 6 10:37:57 2009 +0100 + + video: add an i.MX31 framebuffer driver + + Add a driver for the Synchronous Display Controller and the Display + Interface on i.MX31, using IPU for DMA channel setup. So far only + displaying of bitmaps is supported, no text output. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Anatolij Gustschin <agust@denx.de> + +commit b245e65ee3c4cce3ccf008a21f4528239655876c +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Fri Feb 6 10:37:53 2009 +0100 + + LCD: support 8bpp BMPs on 16bpp displays + + This patch also simplifies some ifdefs in lcd.c, introduces a generic + vidinfo_t, which new drivers are encouraged to use and old drivers to switch + over to. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Anatolij Gustschin <agust@denx.de> + +commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1 +Author: Mark Jackson <mpfj@mimc.co.uk> +Date: Fri Feb 6 10:37:49 2009 +0100 + + Add 16bpp BMP support + + This patch adds 16bpp BMP support to the common lcd code. + + Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code. + + At the moment it's only been tested on the MIMC200 AVR32 board, but extending + this to other platforms should be a simple task !! + + Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Anatolij Gustschin <agust@denx.de> + +commit 689551c5ff1b394b88412f3df22144e79468d3a9 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Fri Feb 6 10:37:41 2009 +0100 + + A driver for the S6E63D6 SPI display controller from Samsung + + This is a driver for the S6E63D6 SPI OLED display controller from Samsung. + It only provides access to controller's registers so the client can freely + configure it. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Anatolij Gustschin <agust@denx.de> + +commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Fri Feb 13 09:26:40 2009 +0100 + + i.MX31: support GPIO as a chip-select in the mxc_spi driver + + Some SPI devices have special requirements on chip-select handling. + With this patch we can use a GPIO as a chip-select and strictly follow + the SPI_XFER_BEGIN and SPI_XFER_END flags. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit b30de3cccf8867566cd314e7c7033904afa5dc9d +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Sat Feb 7 01:18:07 2009 +0100 + + i.MX31: add a simple gpio driver + + This is a minimal driver, so far only managing output. It will + be used by the mxc_spi.c driver. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Sat Feb 7 00:09:12 2009 +0100 + + i.MX31: fix SPI driver for shorter than 32 bit + + Fix setting the SPI Control register, 8 and 16-bit transfers + and a wrong pointer in the free routine in the mxc_spi driver. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:52 2009 +0300 + + mpc83xx: MPC837XERDB: Add PCIe support + + On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe + slots. Let's support them. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:50 2009 +0300 + + mpc83xx: PCI: Fix hard-coded first_busno value + + We should use pci_last_busno() in pci_init_bus(), otherwise we'll + erroneously re-use PCI0's first_busno for PCI1 hoses. + + NOTE: The patch is untested. All MPC83xx FSL boards I have have + PCI1 in miniPCI form, for which I don't have any cards handy. + + But looking in cpu/mpc85xx/pci.c: + ... + #ifdef CONFIG_MPC85XX_PCI2 + hose = &pci_hose[1]; + + hose->first_busno = pci_hose[0].last_busno + 1; + + And considering that we do the same for MPC83xx PCI-E support, + I think this patch is correct. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit a5878d427128c1a9226045ebe05fbadaa02eb9dd +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:46 2009 +0300 + + mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers + + This patch fixes copy-paste issue: pci_hose[0]'s first and last + busnos were used to fixup pci1's nodes. + + We don't see this bug triggering only because Linux reenumerate + buses anyway. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b24a99f6666ac278ec9f9c1334518af828833d19 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:44 2009 +0300 + + mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values + + This patch fixes an issue in config space read accessors: we should + fill-in the value even if we fail (e.g. skipping devices), otherwise + CONFIG_PCI_SCAN_SHOW reports bogus values during boot up. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:42 2009 +0300 + + mpc83xx: PCIe: Don't start bus enumeration at 0 + + Currently we assign first_busno = 0 for the first PCIe hose, but this + scheme won't work if we have ordinary PCI hose already registered (its + first_busno value is 0 too). + + The old code worked fine only because we have PCI disabled on + MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3 + "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards"). + But on MPC837XERDB boards we have PCI and PCIe, so the bug actually + triggers. + + So, to fix the issue, we should use pci_last_busno() + 1 for the + first_busno (i.e. last available busno). + + Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com> + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit cc2a8c7751ddbae3116660064f446888538b93e9 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Feb 19 18:20:41 2009 +0300 + + PCI: Add pci_last_busno() helper + + This is just a handy routine that reports last PCI busno: we walk + down all the hoses and return last hose's last_busno. + + Will be used by PCI/PCIe initialization code. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit bd76729bcbfd64b5d016a9b936f058931fc06eaf +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Mon Feb 23 13:56:51 2009 -0600 + + MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default + + Currently, we get 256MB as the default, but since all the 86xx + board configs define a 2G BAT mapping for RAM, raise default + to 2G. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Thu Feb 12 10:43:32 2009 -0600 + + mpc8641hpcn: Indicate 36-bit addr map in boot messages + + If 36-bit addressing is enabled, print a message on the console + when we boot. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 10 09:38:52 2009 +0100 + + netloop: speed up NetLoop + + NetLoop polls every cycle with getenv some environment variables. + This is horribly slow, especially when the environment is big. + + This patch reads only the environment variables in NetLoop, + when they were changed. + + Also moved the init part of the NetLoop function in a seperate + function. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Dec 22 02:56:07 2008 -0500 + + smc911x_eeprom: new example app for managing newer SMC parts + + A forward port of the last version to work with the newer smc911x driver. + I only have a board with a LAN9218 part on it, so that is the only one + I've tested. But there isn't anything in this that would make it terribly + chip specific afaik. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + CC: Sascha Hauer <s.hauer@pengutronix.de> + CC: Guennadi Liakhovetski <lg@denx.de> + CC: Magnus Lilja <lilja.magnus@gmail.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6 +Author: Pieter Henning <phenning@vastech.co.za> +Date: Sun Feb 22 23:17:15 2009 -0800 + + Added Vitesse VSC8211 definitions to TSEC driver + + Added the struct containing PHY settings for the Vitesse VSC8211 phy to + the phy_info list in tsec.c + + Signed-off-by: Pieter Henning <phenning@vastech.co.za> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 32688e572ff96715b41420e9a7f280db6c399b65 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Feb 23 00:22:21 2009 +0100 + + Update CHANGELOG; Prepare 2009.03-rc1 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 80b827c2b78329c6503b271e43d9eb693d644710 Author: Wolfgang Denk <wd@denx.de> Date: Sun Feb 22 23:45:40 2009 +0100 @@ -775,6 +1508,27 @@ Date: Tue Feb 17 10:26:38 2009 +0100 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb +Author: Heiko Schocher <hs@denx.de> +Date: Wed Feb 11 19:26:15 2009 +0100 + + 83xx: add missing TIMING_CFG1_CASLAT_* defines + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5 +Author: Valeriy Glushkov <gvv@lstec.com> +Date: Thu Feb 5 14:35:21 2009 +0200 + + mpc8349itx: allow SATA boot from the onboard SIL1334 + + This patch allows using of SATA devices connected + to the onboard PCI SIL1334 SATA controller. + + Signed-off-by: Valeriy Glushkov <gvv@lstec.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit e1ac387f4645499746856adc1aeaa9787da2eca6 Author: Andy Fleming <afleming@freescale.com> Date: Thu Oct 30 16:50:14 2008 -0500 |