diff options
125 files changed, 7877 insertions, 544 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index eb24f8181d..d2b7410a9b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -841,6 +841,11 @@ S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-ubi.git F: drivers/mtd/ubi/ +UFS +M: Faiz Abbas <faiz_abbas@ti.com> +S: Maintained +F: drivers/ufs/ + USB M: Marek Vasut <marex@denx.de> S: Maintained diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 75041ce30d..629c5e8c2d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1008,7 +1008,6 @@ config ARCH_VF610 config ARCH_ZYNQ bool "Xilinx Zynq based platform" - select BOARD_EARLY_INIT_F if WDT select CLK select CLK_ZYNQ select CPU_V7A diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 3b8dc2f56f..6a7dbb6309 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -250,9 +250,12 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ zynqmp-a2197-revA.dtb \ - zynqmp-a2197-g-revA.dtb \ - zynqmp-a2197-m-revA.dtb \ - zynqmp-a2197-p-revA.dtb \ + zynqmp-e-a2197-00-revA.dtb \ + zynqmp-g-a2197-00-revA.dtb \ + zynqmp-m-a2197-01-revA.dtb \ + zynqmp-m-a2197-02-revA.dtb \ + zynqmp-m-a2197-03-revA.dtb \ + zynqmp-p-a2197-00-revA.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ @@ -268,6 +271,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zcu111-revA.dtb \ zynqmp-zcu1275-revA.dtb \ zynqmp-zcu1275-revB.dtb \ + zynqmp-zcu216-revA.dtb \ zynqmp-zc1232-revA.dtb \ zynqmp-zc1254-revA.dtb \ zynqmp-zc1751-xm015-dc1.dtb \ @@ -833,4 +837,4 @@ PHONY += dtbs dtbs: $(addprefix $(obj)/, $(dtb-y)) @: -clean-files := *.dtb *_HS +clean-files := *.dtb *.dtbo *_HS diff --git a/arch/arm/dts/k3-j721e-main.dtsi b/arch/arm/dts/k3-j721e-main.dtsi index 6bd59bac52..3a0763209f 100644 --- a/arch/arm/dts/k3-j721e-main.dtsi +++ b/arch/arm/dts/k3-j721e-main.dtsi @@ -339,4 +339,28 @@ ti,sci-proc-ids = <0x30 0xFF>; resets = <&k3_reset 15 1>; }; + + ufs_wrapper: ufs-wrapper@4e80000 { + compatible = "ti,j721e-ufs"; + reg = <0x0 0x4e80000 0x0 0x100>; + power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + ufs@4e84000 { + compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; + reg = <0x0 0x4e84000 0x0 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <0 0>, <0 0>; + clocks = <&k3_clks 277 0>, <&k3_clks 277 1>; + clock-names = "core_clk", "phy_clk"; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + dma-coherent; + }; + }; }; diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi index b958b5b3c1..92beeea34d 100644 --- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi @@ -107,4 +107,30 @@ loczrama = <1>; }; }; + + fss: fss@47000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x47000000 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hbmc_mux: hbmc-mux { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* HBMC select */ + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,j721e-hbmc", "ti,am654-hbmc"; + reg = <0x0 0x47034000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <1>; + mux-controls = <&hbmc_mux 0>; + assigned-clocks = <&k3_clks 102 0>; + assigned-clock-rates = <250000000>; + }; + }; }; diff --git a/arch/arm/dts/k3-j721e-som-p0.dtsi b/arch/arm/dts/k3-j721e-som-p0.dtsi index 1884fc7014..1e1519f1c9 100644 --- a/arch/arm/dts/k3-j721e-som-p0.dtsi +++ b/arch/arm/dts/k3-j721e-som-p0.dtsi @@ -27,3 +27,37 @@ }; }; }; + +&wkup_pmx0 { + mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (E20) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ + J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C21) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ + J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (F19) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */ + J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* (E22) MCU_OSPI1_CSn1.MCU_HYPERBUS0_CSn1 */ + J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (E19) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */ + J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (D21) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */ + J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D20) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */ + J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (G19) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */ + J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (G20) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */ + J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (F20) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */ + J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (F21) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */ + J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (E21) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */ + J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (B22) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */ + J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ + >; + }; +}; + +&hbmc { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; + ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */ + <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */ + + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + }; +}; diff --git a/arch/arm/dts/versal-mini-emmc1.dts b/arch/arm/dts/versal-mini-emmc1.dts index 9ecb1ce5dc..4e0758f618 100644 --- a/arch/arm/dts/versal-mini-emmc1.dts +++ b/arch/arm/dts/versal-mini-emmc1.dts @@ -35,7 +35,7 @@ #size-cells = <0x2>; ranges; - sdhci1: sdhci@f105000 { + sdhci1: sdhci@f1050000 { compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a"; status = "okay"; reg = <0x0 0xf1050000 0x0 0x10000>; diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index e1b0816a34..07dfa0d107 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -213,6 +213,33 @@ #size-cells = <0>; }; + smcc: memory-controller@e000e000 { + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + interrupt-parent = <&intc>; + interrupts = <0 18 4>; + ranges ; + reg = <0xe000e000 0x1000>; + nand0: flash@e1000000 { + status = "disabled"; + compatible = "arm,pl353-nand-r2p1"; + reg = <0xe1000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + nor0: flash@e2000000 { + status = "disabled"; + compatible = "cfi-flash"; + reg = <0xe2000000 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + gem0: ethernet@e000b000 { compatible = "cdns,zynq-gem", "cdns,gem"; reg = <0xe000b000 0x1000>; diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi index 247a35f921..998298cc9b 100644 --- a/arch/arm/dts/zynqmp-clk-ccf.dtsi +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -7,29 +7,30 @@ * Michal Simek <michal.simek@xilinx.com> */ +#include <dt-bindings/clock/xlnx-zynqmp-clk.h> / { fclk0: fclk0 { - status = "disabled"; + status = "okay"; compatible = "xlnx,fclk"; - clocks = <&clkc 71>; + clocks = <&zynqmp_clk PL0_REF>; }; fclk1: fclk1 { - status = "disabled"; + status = "okay"; compatible = "xlnx,fclk"; - clocks = <&clkc 72>; + clocks = <&zynqmp_clk PL1_REF>; }; fclk2: fclk2 { - status = "disabled"; + status = "okay"; compatible = "xlnx,fclk"; - clocks = <&clkc 73>; + clocks = <&zynqmp_clk PL2_REF>; }; fclk3: fclk3 { - status = "disabled"; + status = "okay"; compatible = "xlnx,fclk"; - clocks = <&clkc 74>; + clocks = <&zynqmp_clk PL3_REF>; }; pss_ref_clk: pss_ref_clk { @@ -67,35 +68,6 @@ clock-frequency = <27000000>; }; - clkc: clkc { - u-boot,dm-pre-reloc; - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clkc"; - clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; - clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", "aux_ref_clk", "gt_crx_ref_clk"; - clock-output-names = "iopll", "rpll", "apll", "dpll", - "vpll", "iopll_to_fpd", "rpll_to_fpd", - "apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd", - "acpu", "acpu_half", "dbf_fpd", "dbf_lpd", - "dbg_trace", "dbg_tstmp", "dp_video_ref", - "dp_audio_ref", "dp_stc_ref", "gdma_ref", - "dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref", - "gpu_ref", "gpu_pp0_ref", "gpu_pp1_ref", - "topsw_main", "topsw_lsbus", "gtgref0_ref", - "lpd_switch", "lpd_lsbus", "usb0_bus_ref", - "usb1_bus_ref", "usb3_dual_ref", "usb0", - "usb1", "cpu_r5", "cpu_r5_core", "csu_spb", - "csu_pll", "pcap", "iou_switch", "gem_tsu_ref", - "gem_tsu", "gem0_ref", "gem1_ref", "gem2_ref", - "gem3_ref", "gem0_tx", "gem1_tx", "gem2_tx", - "gem3_tx", "qspi_ref", "sdio0_ref", "sdio1_ref", - "uart0_ref", "uart1_ref", "spi0_ref", - "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref", - "can0_ref", "can1_ref", "can0", "can1", - "dll_ref", "adma_ref", "timestamp_ref", - "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt"; - }; - dp_aclk: dp_aclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -104,202 +76,214 @@ }; }; +&zynqmp_firmware { + zynqmp_clk: clock-controller { + u-boot,dm-pre-reloc; + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, + <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", + "aux_ref_clk", "gt_crx_ref_clk"; + }; +}; + &can0 { - clocks = <&clkc 63>, <&clkc 31>; + clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>; }; &can1 { - clocks = <&clkc 64>, <&clkc 31>; + clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>; }; &cpu0 { - clocks = <&clkc 10>; + clocks = <&zynqmp_clk ACPU>; }; &fpd_dma_chan1 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan2 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan3 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan4 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan5 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan6 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan7 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &fpd_dma_chan8 { - clocks = <&clkc 19>, <&clkc 31>; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &gpu { - clocks = <&clkc 24>, <&clkc 25>, <&clkc 26>; + clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>, <&zynqmp_clk GPU_PP1_REF>; }; &lpd_dma_chan1 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan2 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan3 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan4 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan5 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan6 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan7 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &lpd_dma_chan8 { - clocks = <&clkc 68>, <&clkc 31>; + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; &nand0 { - clocks = <&clkc 60>, <&clkc 31>; + clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>; }; &gem0 { - clocks = <&clkc 31>, <&clkc 49>, <&clkc 45>, <&clkc 49>, <&clkc 44>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>, + <&zynqmp_clk GEM0_RX>, <&zynqmp_clk GEM_TSU>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem1 { - clocks = <&clkc 31>, <&clkc 50>, <&clkc 46>, <&clkc 50>, <&clkc 44>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM1_TX>, + <&zynqmp_clk GEM1_RX>, <&zynqmp_clk GEM_TSU>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem2 { - clocks = <&clkc 31>, <&clkc 51>, <&clkc 47>, <&clkc 51>, <&clkc 44>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM2_TX>, + <&zynqmp_clk GEM2_RX>, <&zynqmp_clk GEM_TSU>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem3 { - clocks = <&clkc 31>, <&clkc 52>, <&clkc 48>, <&clkc 52>, <&clkc 44>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM3_TX>, + <&zynqmp_clk GEM3_RX>, <&zynqmp_clk GEM_TSU>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gpio { - clocks = <&clkc 31>; + clocks = <&zynqmp_clk LPD_LSBUS>; }; &i2c0 { - clocks = <&clkc 61>; + clocks = <&zynqmp_clk I2C0_REF>; }; &i2c1 { - clocks = <&clkc 62>; + clocks = <&zynqmp_clk I2C1_REF>; }; &pcie { - clocks = <&clkc 23>; + clocks = <&zynqmp_clk PCIE_REF>; }; &qspi { - clocks = <&clkc 53>, <&clkc 31>; + clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>; }; &sata { - clocks = <&clkc 22>; + clocks = <&zynqmp_clk SATA_REF>; }; &sdhci0 { - clocks = <&clkc 54>, <&clkc 31>; + clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>; }; &sdhci1 { - clocks = <&clkc 55>, <&clkc 31>; + clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>; }; &spi0 { - clocks = <&clkc 58>, <&clkc 31>; + clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>; }; &spi1 { - clocks = <&clkc 59>, <&clkc 31>; + clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>; }; &ttc0 { - clocks = <&clkc 31>; + clocks = <&zynqmp_clk LPD_LSBUS>; }; &ttc1 { - clocks = <&clkc 31>; + clocks = <&zynqmp_clk LPD_LSBUS>; }; &ttc2 { - clocks = <&clkc 31>; + clocks = <&zynqmp_clk LPD_LSBUS>; }; &ttc3 { - clocks = <&clkc 31>; + clocks = <&zynqmp_clk LPD_LSBUS>; }; &uart0 { - clocks = <&clkc 56>, <&clkc 31>; + clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>; }; &uart1 { - clocks = <&clkc 57>, <&clkc 31>; + clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>; }; &usb0 { - clocks = <&clkc 32>, <&clkc 34>; + clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; }; &usb1 { - clocks = <&clkc 33>, <&clkc 34>; + clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; }; &watchdog0 { - clocks = <&clkc 75>; -}; - -&xilinx_ams { - clocks = <&clkc 70>; + clocks = <&zynqmp_clk WDT>; }; -&xilinx_drm { - clocks = <&clkc 16>; +&lpd_watchdog { + clocks = <&zynqmp_clk LPD_WDT>; }; -&xlnx_dp { - clocks = <&dp_aclk>, <&clkc 17>; +&xilinx_ams { + clocks = <&zynqmp_clk AMS_REF>; }; &xlnx_dpdma { - clocks = <&clkc 20>; + clocks = <&zynqmp_clk DPDMA_REF>; }; &xlnx_dp_snd_codec0 { - clocks = <&clkc 17>; + clocks = <&zynqmp_clk DP_AUDIO_REF>; }; diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi index c70f85a430..9ef55ad0d1 100644 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ b/arch/arm/dts/zynqmp-clk.dtsi @@ -223,6 +223,10 @@ clocks = <&clk100>; }; +&lpd_watchdog { + clocks = <&clk250>; +}; + &xilinx_drm { clocks = <&drm_clock>; }; diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts new file mode 100644 index 0000000000..39b5d7fff9 --- /dev/null +++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts @@ -0,0 +1,559 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "Versal System Controller on a2197 Eval board RevA"; /* VCK190/VMK180 */ + compatible = "xlnx,zynqmp-e-a2197-00-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ina226-vccint { + compatible = "iio-hwmon"; + io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>; + }; + ina226-vcc-soc { + compatible = "iio-hwmon"; + io-channels = <&vcc_soc 0>, <&vcc_soc 1>, <&vcc_soc 2>, <&vcc_soc 3>; + }; + ina226-vcc-pmc { + compatible = "iio-hwmon"; + io-channels = <&vcc_pmc 0>, <&vcc_pmc 1>, <&vcc_pmc 2>, <&vcc_pmc 3>; + }; + ina226-vcc-ram { + compatible = "iio-hwmon"; + io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>; + }; + ina226-vcc-pslp { + compatible = "iio-hwmon"; + io-channels = <&vcc_pslp 0>, <&vcc_pslp 1>, <&vcc_pslp 2>, <&vcc_pslp 3>; + }; + ina226-vcc-psfp { + compatible = "iio-hwmon"; + io-channels = <&vcc_psfp 0>, <&vcc_psfp 1>, <&vcc_psfp 2>, <&vcc_psfp 3>; + }; + ina226-vccaux { + compatible = "iio-hwmon"; + io-channels = <&vccaux 0>, <&vccaux 1>, <&vccaux 2>, <&vccaux 3>; + }; + ina226-vccaux-pmc { + compatible = "iio-hwmon"; + io-channels = <&vccaux_pmc 0>, <&vccaux_pmc 1>, <&vccaux_pmc 2>, <&vccaux_pmc 3>; + }; + ina226-vcco-500 { + compatible = "iio-hwmon"; + io-channels = <&vcco_500 0>, <&vcco_500 1>, <&vcco_500 2>, <&vcco_500 3>; + }; + ina226-vcco-501 { + compatible = "iio-hwmon"; + io-channels = <&vcco_501 0>, <&vcco_501 1>, <&vcco_501 2>, <&vcco_501 3>; + }; + ina226-vcco-502 { + compatible = "iio-hwmon"; + io-channels = <&vcco_502 0>, <&vcco_502 1>, <&vcco_502 2>, <&vcco_502 3>; + }; + ina226-vcco-503 { + compatible = "iio-hwmon"; + io-channels = <&vcco_503 0>, <&vcco_503 1>, <&vcco_503 2>, <&vcco_503 3>; + }; + ina226-vcc-1v8 { + compatible = "iio-hwmon"; + io-channels = <&vcc_1v8 0>, <&vcc_1v8 1>, <&vcc_1v8 2>, <&vcc_1v8 3>; + }; + ina226-vcc-3v3 { + compatible = "iio-hwmon"; + io-channels = <&vcc_3v3 0>, <&vcc_3v3 1>, <&vcc_3v3 2>, <&vcc_3v3 3>; + }; + ina226-vcc-1v2-ddr4 { + compatible = "iio-hwmon"; + io-channels = <&vcc_1v2_ddr4 0>, <&vcc_1v2_ddr4 1>, <&vcc_1v2_ddr4 2>, <&vcc_1v2_ddr4 3>; + }; + ina226-vcc-1v1-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>; + }; + ina226-vadj-fmc { + compatible = "iio-hwmon"; + io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>; + }; + ina226-mgtyavcc { + compatible = "iio-hwmon"; + io-channels = <&mgtyavcc 0>, <&mgtyavcc 1>, <&mgtyavcc 2>, <&mgtyavcc 3>; + }; + ina226-mgtyavtt { + compatible = "iio-hwmon"; + io-channels = <&mgtyavtt 0>, <&mgtyavtt 1>, <&mgtyavtt 2>, <&mgtyavtt 3>; + }; + ina226-mgtyvccaux { + compatible = "iio-hwmon"; + io-channels = <&mgtyvccaux 0>, <&mgtyvccaux 1>, <&mgtyvccaux 2>, <&mgtyvccaux 3>; + }; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "okay"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; + phy0: ethernet-phy@0 { /* u131 M88E1512 */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */ + "DC_SYS_CTRL3", "ZU4_TRIGGER", "SYSCTLR_PB", "", "", /* 10 - 14 */ + "", "", "", "", "", /* 15 - 19 */ + "", "", "", "", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "", "", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "", "", "", /* 50 - 54 */ + "", "", "", "", "", /* 55 - 59 */ + "", "", "", "", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 -89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u33 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c@0 { /* PMBUS */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* u152 IR35215 0x16/0x46 vcc_soc */ + /* u160 IRPS5401 0x17/0x47 */ + /* u167 IRPS5401 0x1c/0x4c */ + /* u175 IRPS5401 0x1d/0x4d */ + /* u179 ir38164 0x19/0x49 vcco_500 */ + /* u181 ir38164 0x1a/0x4a vcco_501 */ + /* u183 ir38164 0x1b/0x4b vcco_502 */ + /* u185 ir38164 0x1e/0x4e vadj_fmc */ + /* u187 ir38164 0x1F/0x4f mgtyavcc */ + /* u189 ir38164 0x20/0x50 mgtyavtt */ + /* u194 ir38164 0x13/0x43 vdd1_1v8_lp4 */ + /* u195 ir38164 0x14/0x44 vdd2_1v8_lp4 */ + }; + i2c@1 { /* PMBUS1_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME check alerts coming to SC */ + vccint: ina226@40 { /* u65 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint"; + reg = <0x40>; + shunt-resistor = <5000>; /* R440 */ + /* 0.78V @ 32A 1 of 6 Phases*/ + }; + vcc_soc: ina226@41 { /* u161 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-soc"; + reg = <0x41>; + shunt-resistor = <2000>; /* R1186 */ + /* 0.78V @ 18A */ + }; + vcc_pmc: ina226@42 { /* u163 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-pmc"; + reg = <0x42>; + shunt-resistor = <5000>; /* R1214 */ + /* 0.78V @ 500mA */ + }; + vcc_ram: ina226@43 { /* u162 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-ram"; + reg = <0x43>; + shunt-resistor = <5000>; /* r1221 */ + /* 0.78V @ 4A */ + }; + vcc_pslp: ina226@44 { /* u165 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-pslp"; + reg = <0x44>; + shunt-resistor = <5000>; /* R1216 */ + /* 0.78V @ 1A */ + }; + vcc_psfp: ina226@45 { /* u164 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-psfp"; + reg = <0x45>; + shunt-resistor = <5000>; /* R1219 */ + /* 0.78V @ 2A */ + }; + }; + i2c@2 { /* PCIE_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 */ + #clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/ + compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */ + reg = <0xd8>; + /* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */ + /* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */ + }; + }; + i2c@3 { /* PMBUS2_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* FIXME check alerts coming to SC */ + vccaux: ina226@40 { /* u166 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccaux"; + reg = <0x40>; + shunt-resistor = <5000>; /* R382 */ + /* 1.5V @ 3A */ + }; + vccaux_pmc: ina226@41 { /* u168 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccaux-pmc"; + reg = <0x41>; + shunt-resistor = <5000>; /* R1246 */ + /* 1.5V @ 500mA */ + }; + vcco_500: ina226@42 { /* u178 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcco-500"; + reg = <0x42>; + shunt-resistor = <2000>; /* R1300 */ + /* 3.3V @ 5A */ + }; + vcco_501: ina226@43 { /* u180 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcco-501"; + reg = <0x43>; + shunt-resistor = <2000>; /* R1313 */ + /* 3.3V @ 5A */ + }; + vcco_502: ina226@44 { /* u182 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcco-502"; + reg = <0x44>; + shunt-resistor = <2000>; /* R1330 */ + /* 3.3V @ 5A */ + }; + vcco_503: ina226@45 { /* u172 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcco-503"; + reg = <0x45>; + shunt-resistor = <5000>; /* R1229 */ + /* 1.8V @ 2A */ + }; + vcc_1v8: ina226@46 { /* u173 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-1v8"; + reg = <0x46>; + shunt-resistor = <5000>; /* R400 */ + /* 1.8V @ 6A */ + }; + vcc_3v3: ina226@47 { /* u174 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-3v3"; + reg = <0x47>; + shunt-resistor = <5000>; /* R1232 */ + /* 3.3V @ 500mA */ + }; + vcc_1v2_ddr4: ina226@48 { /* u176 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-1v2-ddr4"; + reg = <0x48>; + shunt-resistor = <5000>; /* R1275 */ + /* 1.2V @ 4A */ + }; + vcc1v1_lp4: ina226@49 { /* u177 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v1-lp4"; + reg = <0x49>; + shunt-resistor = <5000>; /* R1286 */ + /* 1.1V @ 4A */ + }; + vadj_fmc: ina226@4a { /* u184 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vadj-fmc"; + reg = <0x4a>; + shunt-resistor = <2000>; /* R1350 */ + /* 1.5V @ 10A */ + }; + mgtyavcc: ina226@4b { /* u186 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgtyavcc"; + reg = <0x4b>; + shunt-resistor = <2000>; /* R1367 */ + /* 0.88V @ 6A */ + }; + mgtyavtt: ina226@4c { /* u188 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgtyavtt"; + reg = <0x4c>; + shunt-resistor = <2000>; /* R1384 */ + /* 1.2V @ 10A */ + }; + mgtyvccaux: ina226@4d { /* u234 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgtyvccaux"; + reg = <0x4d>; + shunt-resistor = <5000>; /* r1679 */ + /* 1.5V @ 500mA */ + }; + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* FIXME wires ready but chip is missing */ + }; + i2c@5 { /* zSFP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_zsfp: clock-generator@5d { /* u192 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <156250000>; + clock-output-names = "si570_hsdp_clk"; + }; + }; + i2c@6 { /* USER_SI570_1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_user1_clk: clock-generator@5d { /* u205 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5f>; + temperature-stability = <50>; + factory-fout = <100000000>; + clock-frequency = <100000000>; + clock-output-names = "si570_user1"; + }; + + }; + i2c@7 { /* USER_SI570_2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* FIXME wires ready but chip is missing */ + }; + }; +}; + +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u34 - m24128 16kB */ + compatible = "st,24c128", "atmel,24c128"; + reg = <0x54>; /* 0x5c too */ + }; + si570_ref_clk: clock-generator@5d { /* u32 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <33333333>; + clock-frequency = <33333333>; + clock-output-names = "ref_clk"; + }; + /* and connector J212D */ + }; + fmc1: i2c@1 { /* FMCP1_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME connection to Samtec J51C */ + /* expected eeprom 0x50 FMC cards */ + }; + fmc2: i2c@2 { /* FMCP2_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* FIXME connection to Samtec J53C */ + /* expected eeprom 0x50 FMC cards */ + }; + i2c@3 { /* DDR4_DIMM1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_ddr_dimm1: clock-generator@60 { /* u2 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; + temperature-stability = <50>; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "si570_ddrdimm1_clk"; + }; + }; + i2c@4 { /* LPDDR4_SI570_CLK2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_ddr_dimm2: clock-generator@60 { /* u3 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; + temperature-stability = <50>; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "si570_lpddr4_clk2"; + }; + }; + i2c@5 { /* LPDDR4_SI570_CLK1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_lpddr4: clock-generator@60 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; + temperature-stability = <50>; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "si570_lpddr4_clk1"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u5 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <156250000>; + clock-output-names = "si570_hsdp_clk"; + }; + }; + i2c@7 { /* 8A34001 - U219B and J310 connector */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-g-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts index c6072b5f42..09da60b100 100644 --- a/arch/arm/dts/zynqmp-a2197-g-revA.dts +++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts @@ -14,7 +14,7 @@ / { model = "Versal System Controller on a2197 MGT Char board RevA"; - compatible = "xlnx,zynqmp-a2197-g-revA", "xlnx,zynqmp-a2197-revA", + compatible = "xlnx,zynqmp-g-a2197-00-revA", "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp"; aliases { @@ -38,6 +38,31 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u82 { + compatible = "iio-hwmon"; + io-channels = <&u82 0>, <&u82 1>, <&u82 2>, <&u82 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; }; &sdhci0 { /* emmc MIO 13-23 16GB */ @@ -58,7 +83,7 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; is-internal-pcspma; - phy0: phy@0 { /* marwell m88e1512 */ + phy0: ethernet-phy@0 { /* marwell m88e1512 */ reg = <0>; reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; /* xlnx,phy-type = <PHY_TYPE_SGMII>; */ @@ -198,38 +223,50 @@ compatible = "ti,tps544b25"; reg = <0x20>; }; - ina226@40 { /* u74 */ + u74: ina226@40 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x40>; shunt-resistor = <1000>; }; - ina226@41 { /* u75 */ + u75: ina226@41 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x41>; shunt-resistor = <1000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u79 */ + u79: ina226@43 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x43>; shunt-resistor = <1000>; }; - ina226@44 { /* u82 */ + u82: ina226@44 { /* u82 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u82"; reg = <0x44>; shunt-resistor = <1000>; }; - ina226@45 { /* u84 */ + u84: ina226@45 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x45>; shunt-resistor = <5000>; }; tps53681@c0 { /* u53 - FIXME name - don't know what it does - also vcc_io_soc */ - compatible = "ti,tps53681"; /* FIXME no linux driver */ + compatible = "ti,tps53681", "ti,tps53679"; reg = <0xc0>; }; }; diff --git a/arch/arm/dts/zynqmp-a2197-m-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts index e4b45eafe4..e295bac128 100644 --- a/arch/arm/dts/zynqmp-a2197-m-revA.dts +++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts @@ -14,7 +14,7 @@ / { model = "Versal System Controller on a2197 Memory Char board RevA"; - compatible = "xlnx,zynqmp-a2197-m-revA", "xlnx,zynqmp-a2197-revA", + compatible = "xlnx,zynqmp-m-a2197-01-revA", "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp"; aliases { @@ -43,13 +43,38 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ }; + + ina226-vcc-aux { + compatible = "iio-hwmon"; + io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>; + }; + ina226-vcc-ram { + compatible = "iio-hwmon"; + io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>; + }; + ina226-vcc1v1-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>; + }; + ina226-vcc1v2-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>; + }; + ina226-vdd1-1v8-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>; + }; + ina226-vcc0v6-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc0v6_lp4 0>, <&vcc0v6_lp4 1>, <&vcc0v6_lp4 2>, <&vcc0v6_lp4 3>; + }; }; &qspi { status = "okay"; is-dual = <1>; flash@0 { - compatible = "m25p80", "spi-flash"; /* 32MB */ + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; @@ -89,7 +114,7 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; /* DTG generates this properly 1512 */ phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; - phy0: phy@0 { /* marwell m88e1512 - SGMII */ + phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */ reg = <0>; /* xlnx,phy-type = <PHY_TYPE_SGMII>; */ }; @@ -183,31 +208,43 @@ reg = <1>; vcc_aux: ina226@42 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-aux"; reg = <0x42>; shunt-resistor = <5000>; }; vcc_ram: ina226@43 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-ram"; reg = <0x43>; shunt-resistor = <5000>; }; vcc1v1_lp4: ina226@46 { /* u96 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v1-lp4"; reg = <0x46>; shunt-resistor = <5000>; }; vcc1v2_lp4: ina226@47 { /* u98 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v2-lp4"; reg = <0x47>; shunt-resistor = <5000>; }; vdd1_1v8_lp4: ina226@48 { /* u100 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vdd1-1v8-lp4"; reg = <0x48>; shunt-resistor = <5000>; }; vcc0v6_lp4: ina226@49 { /* u101 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc0v6-lp4"; reg = <0x49>; shunt-resistor = <5000>; }; @@ -217,7 +254,7 @@ #size-cells = <0>; reg = <2>; reg_vccint: tps53681@c0 { /* u69 */ - compatible = "ti,tps53681"; /* FIXME no linux driver */ + compatible = "ti,tps53681", "ti,tps53679"; reg = <0xc0>; }; reg_vcc_pmc: tps544@7 { /* u80 */ @@ -289,7 +326,7 @@ reg = <0x51>; }; - i2c-mux@74 { /* u35 */ + i2c-mux@74 { /* u47 */ compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -354,19 +391,14 @@ }; }; }; - i2c@1 { /* UTIL_PMBUS - FIXME incorrect schematics */ - #address-cells = <1>; - #size-cells = <0>; - /* reg = <1>; */ - }; i2c@2 { /* C0_LP4 */ #address-cells = <1>; #size-cells = <0>; reg = <2>; - si570_c0_lp4: clock-generator@5d { /* u10 */ + si570_c0_lp4: clock-generator@55 { /* u10 */ #clock-cells = <0>; compatible = "silabs,si570"; - reg = <0x5d>; /* FIXME addr */ + reg = <0x55>; temperature-stability = <50>; factory-fout = <30000000>; clock-frequency = <30000000>; @@ -391,10 +423,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si570_c2_lp4: clock-generator@5d { /* u10 */ + si570_c2_lp4: clock-generator@55 { /* u10 */ #clock-cells = <0>; compatible = "silabs,si570"; - reg = <0x5d>; /* FIXME addr */ + reg = <0x55>; temperature-stability = <50>; factory-fout = <30000000>; clock-frequency = <30000000>; @@ -405,10 +437,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <5>; - si570_c3_lp4: clock-generator@5d { /* u15 */ + si570_c3_lp4: clock-generator@55 { /* u15 */ #clock-cells = <0>; compatible = "silabs,si570"; - reg = <0x5d>; /* FIXME addr */ + reg = <0x55>; temperature-stability = <50>; factory-fout = <30000000>; clock-frequency = <30000000>; @@ -424,8 +456,8 @@ compatible = "silabs,si570"; reg = <0x5d>; /* FIXME addr */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ - clock-frequency = <33333333>; + factory-fout = <156250000>; + clock-frequency = <156250000>; clock-output-names = "HSDP_SI570"; }; }; diff --git a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts new file mode 100644 index 0000000000..bd2c1a46bd --- /dev/null +++ b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 Memory Char board RevA"; + compatible = "xlnx,zynqmp-m-a2197-02-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; + + ina226-vcc-aux { + compatible = "iio-hwmon"; + io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>; + }; + ina226-vcc-ram { + compatible = "iio-hwmon"; + io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>; + }; + ina226-vcc1v1-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>; + }; + ina226-vcc1v2-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>; + }; + ina226-vdd1-1v8-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>; + }; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; /* FIXME tap delay */ +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "disable"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; + phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */ + "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */ + "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", "", "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 -89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u46 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { /* PMBUS must be enabled via SW21 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + reg_vcc1v2_lp4: tps544@15 { /* u97 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u95 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + reg_vdd1_1v8_lp4: tps544@17 { /* u99 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + /* UTIL_PMBUS connection */ + reg_vcc1v8: tps544@13 { /* u92 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u93 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + reg_vcc5v0: tps544@1e { /* u94 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + reg_vpp_2v5_ddr4: tps544@1x { /* u3007 */ + compatible = "ti,tps544b25"; + reg = <0x17>; /* FIXME wrong in schematics */ + }; + }; + i2c@1 { /* PMBUS_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + vcc_aux: ina226@42 { /* u86 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-aux"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u81 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-ram"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc1v1_lp4: ina226@46 { /* u96 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v1-lp4"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc1v2_lp4: ina226@47 { /* u98 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v2-lp4"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vdd1_1v8_lp4: ina226@48 { /* u100 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vdd1-1v8-lp4"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + reg_vccint: tps53681@c0 { /* u69 */ + compatible = "ti,tps53681", "ti,tps53679"; + reg = <0xc0>; + }; + reg_vcc_pmc: tps544@7 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x7>; + }; + reg_vcc_ram: tps544@8 { /* u82 */ + compatible = "ti,tps544b25"; + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u84 */ + compatible = "ti,tps544b25"; + reg = <0xa>; + }; + reg_vccaux: tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + reg_vccaux_pmc: tps544@e { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u90 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u91 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + }; + i2c@3 { /* MEM PMBUS - FIXME bug in schematics */ + #address-cells = <1>; + #size-cells = <0>; + /* reg = <3>; */ + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to U20G */ + }; + i2c@5 { /* C0_DDR4_RDIMM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + i2c@6 { /* C2_DDR5_RDIMM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + i2c@7 { /* C3_DDR4_UDIMM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* TODO sysctrl via J239 */ +/* TODO samtec J212G/H via J242 */ +/* TODO teensy via U30 PCA9543A bus 1 */ +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u47 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u26 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec U20D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@2 { /* C0_DDR4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_c0_ddr4: clock-generator@55 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C0_DD4_SI570_CLK"; + }; + }; + i2c@3 { /* C1_RLD3 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_c1_lp4: clock-generator@55 { /* u7 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C1_RLD3_SI570_CLK"; + }; + }; + i2c@4 { /* C2_DDR5 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_c2_lp4: clock-generator@55 { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C2_DDR5_SI570_CLK"; + }; + }; + i2c@5 { /* C3_DDR4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_c3_lp4: clock-generator@55 { /* u15 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C3_LP4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u19 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <156250000>; + clock-output-names = "HSDP_SI570"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + /* dr_mode = "peripheral"; */ + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "disabled"; /* not at mem board */ + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "disabled"; +}; diff --git a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts new file mode 100644 index 0000000000..700197c1f3 --- /dev/null +++ b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 Memory Char board RevA"; + compatible = "xlnx,zynqmp-m-a2197-03-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; + + ina226-vcc-aux { + compatible = "iio-hwmon"; + io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>; + }; + ina226-vcc-ram { + compatible = "iio-hwmon"; + io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>; + }; + ina226-vcc1v1-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>; + }; + ina226-vcc1v2-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>; + }; + ina226-vdd1-1v8-lp4 { + compatible = "iio-hwmon"; + io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>; + }; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; /* FIXME tap delay */ +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "disable"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; + phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */ + "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */ + "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", "", "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 -89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u46 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { /* PMBUS must be enabled via SW21 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + reg_vcc1v2_lp4: tps544@15 { /* u97 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u95 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + reg_vdd1_1v8_lp4: tps544@17 { /* u99 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + /* UTIL_PMBUS connection */ + reg_vcc1v8: tps544@13 { /* u92 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u93 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + reg_vcc5v0: tps544@1e { /* u94 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + reg_vpp_2v5_ddr4: tps544@1x { /* u3007 */ + compatible = "ti,tps544b25"; + reg = <0x17>; /* FIXME wrong in schematics */ + }; + }; + i2c@1 { /* PMBUS_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + vcc_aux: ina226@42 { /* u86 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-aux"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u81 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc-ram"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc1v1_lp4: ina226@46 { /* u96 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v1-lp4"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc1v2_lp4: ina226@47 { /* u98 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v2-lp4"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vdd1_1v8_lp4: ina226@48 { /* u100 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vdd1-1v8-lp4"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + reg_vccint: tps53681@c0 { /* u69 */ + compatible = "ti,tps53681", "ti,tps53679"; + reg = <0xc0>; + }; + reg_vcc_pmc: tps544@7 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x7>; + }; + reg_vcc_ram: tps544@8 { /* u82 */ + compatible = "ti,tps544b25"; + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u84 */ + compatible = "ti,tps544b25"; + reg = <0xa>; + }; + reg_vccaux: tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + reg_vccaux_pmc: tps544@e { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u90 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u91 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + }; + i2c@3 { /* MEM PMBUS - FIXME bug in schematics */ + #address-cells = <1>; + #size-cells = <0>; + /* reg = <3>; */ + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to U20G */ + }; + i2c@5 { /* DDR4_SODIMM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; +}; + +/* TODO sysctrl via J239 */ +/* TODO samtec J212G/H via J242 */ +/* TODO teensy via U30 PCA9543A bus 1 */ +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u47 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u26 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec U20D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@2 { /* C0_DDR4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_c0_ddr4: clock-generator@55 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C0_DD4_SI570_CLK"; + }; + }; + i2c@3 { /* C1_SODIMM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_c1_lp4: clock-generator@55 { /* u7 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C1_SODIMM_SI570_CLK"; + }; + }; + i2c@4 { /* C2_QDRIV */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_c2_lp4: clock-generator@55 { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C2_QDRIV_SI570_CLK"; + }; + }; + i2c@5 { /* C3_DDR4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_c3_lp4: clock-generator@55 { /* u15 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x55>; + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C3_LP4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u19 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <156250000>; + clock-output-names = "HSDP_SI570"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + /* dr_mode = "peripheral"; */ + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "disabled"; /* not at mem board */ + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "disabled"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-p-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts index 322b36e391..d49b632a1d 100644 --- a/arch/arm/dts/zynqmp-a2197-p-revA.dts +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts @@ -14,7 +14,7 @@ / { model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */ - compatible = "xlnx,zynqmp-a2197-p-revA", "xlnx,zynqmp-a2197-revA", + compatible = "xlnx,zynqmp-p-a2197-00-revA", "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp"; aliases { @@ -41,7 +41,7 @@ memory@0 { device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + reg = <0x0 0x0 0x0 0x80000000>; }; }; @@ -76,7 +76,7 @@ phy-mode = "sgmii"; /* DTG generates this properly 1512 */ is-internal-pcspma; /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; @@ -155,9 +155,9 @@ compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ reg = <0xa>; }; - reg_vccint: tps53681@c0 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */ - compatible = "ti,tps53681"; /* FIXME no linux driver */ - reg = <0xc0>; + reg_vccint: tps53681@60 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681", "ti,tps53679"; + reg = <0x60>; /* vccint, vcc_io_soc */ }; }; @@ -165,7 +165,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - /* FIXME check alerts comming to SC */ + /* FIXME check alerts coming to SC */ vcc_fmc: ina226@42 { /* u81 */ compatible = "ti,ina226"; reg = <0x42>; @@ -387,9 +387,9 @@ compatible = "silabs,si570"; reg = <0x5d>; /* 570JAC000900DG */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different */ + factory-fout = <33333333>; clock-frequency = <33333333>; - clock-output-names = "REF_CLK"; /* FIXME */ + clock-output-names = "ref_clk"; }; /* Connection via Samtec J212D */ /* Use for storing information about X-PRC card */ @@ -455,9 +455,9 @@ compatible = "silabs,si570"; reg = <0x60>; /* 570BAB000299DG */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ - clock-frequency = <33333333>; - clock-output-names = "REF_CLK"; /* FIXME */ + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "si570_ddrdimm1_clk"; }; /* 0x50 SPD? */ }; @@ -470,9 +470,9 @@ compatible = "silabs,si570"; reg = <0x60>; /* 570BAB000299DG */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ - clock-frequency = <33333333>; - clock-output-names = "REF_CLK"; /* FIXME */ + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "si570_ddrdimm2_clk"; }; /* 0x50 SPD? */ }; @@ -485,9 +485,9 @@ compatible = "silabs,si570"; reg = <0x60>; /* 570BAB000299DG */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ - clock-frequency = <33333333>; - clock-output-names = "LPDDR4_SI570_CLK"; + factory-fout = <200000000>; + clock-frequency = <200000000>; + clock-output-names = "si570_lpddr4_clk"; }; }; i2c@6 { /* HSDP_SI570 */ @@ -499,9 +499,9 @@ compatible = "silabs,si570"; reg = <0x5d>; /* 570JAC000900DG */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ - clock-frequency = <33333333>; - clock-output-names = "HSDP_SI570"; + factory-fout = <156250000>; + clock-frequency = <156250000>; + clock-output-names = "si570_hsdp_clk"; }; }; i2c@7 { /* PCIE_CLK */ diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index 8824f5cc02..bb6a94eefb 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -75,7 +75,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index afa90a8a5b..1cc8aaa879 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -85,11 +85,12 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@5 { + phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; @@ -118,56 +119,66 @@ &nand0 { status = "okay"; arasan,has-mdma; - num-cs = <2>; - partition@0 { /* for testing purpose */ - label = "nand-fsbl-uboot"; - reg = <0x0 0x0 0x400000>; - }; - partition@1 { /* for testing purpose */ - label = "nand-linux"; - reg = <0x0 0x400000 0x1400000>; - }; - partition@2 { /* for testing purpose */ - label = "nand-device-tree"; - reg = <0x0 0x1800000 0x400000>; - }; - partition@3 { /* for testing purpose */ - label = "nand-rootfs"; - reg = <0x0 0x1C00000 0x1400000>; - }; - partition@4 { /* for testing purpose */ - label = "nand-bitstream"; - reg = <0x0 0x3000000 0x400000>; - }; - partition@5 { /* for testing purpose */ - label = "nand-misc"; - reg = <0x0 0x3400000 0xFCC00000>; - }; + nand@0 { + reg = <0x0>; + #address-cells = <0x2>; + #size-cells = <0x1>; - partition@6 { /* for testing purpose */ - label = "nand1-fsbl-uboot"; - reg = <0x1 0x0 0x400000>; - }; - partition@7 { /* for testing purpose */ - label = "nand1-linux"; - reg = <0x1 0x400000 0x1400000>; - }; - partition@8 { /* for testing purpose */ - label = "nand1-device-tree"; - reg = <0x1 0x1800000 0x400000>; - }; - partition@9 { /* for testing purpose */ - label = "nand1-rootfs"; - reg = <0x1 0x1C00000 0x1400000>; - }; - partition@10 { /* for testing purpose */ - label = "nand1-bitstream"; - reg = <0x1 0x3000000 0x400000>; + partition@0 { /* for testing purpose */ + label = "nand-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand-rootfs"; + reg = <0x0 0x1c00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand-misc"; + reg = <0x0 0x3400000 0xfcc00000>; + }; }; - partition@11 { /* for testing purpose */ - label = "nand1-misc"; - reg = <0x1 0x3400000 0xFCC00000>; + nand@1 { + reg = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x1>; + + partition@0 { /* for testing purpose */ + label = "nand1-fsbl-uboot"; + reg = <0x0 0x0 0x400000>; + }; + partition@1 { /* for testing purpose */ + label = "nand1-linux"; + reg = <0x0 0x400000 0x1400000>; + }; + partition@2 { /* for testing purpose */ + label = "nand1-device-tree"; + reg = <0x0 0x1800000 0x400000>; + }; + partition@3 { /* for testing purpose */ + label = "nand1-rootfs"; + reg = <0x0 0x1c00000 0x1400000>; + }; + partition@4 { /* for testing purpose */ + label = "nand1-bitstream"; + reg = <0x0 0x3000000 0x400000>; + }; + partition@5 { /* for testing purpose */ + label = "nand1-misc"; + reg = <0x0 0x3400000 0xfcc00000>; + }; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index d6a010355b..2ead8dd24d 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -76,7 +76,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { /* VSC8211 */ + phy0: ethernet-phy@0 { /* VSC8211 */ reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts index 0632b18ccf..12c0173c55 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -73,7 +73,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts index 5285f62d1a..14aa98de73 100644 --- a/arch/arm/dts/zynqmp-zcu100-revC.dts +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -124,6 +124,11 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; + }; }; &dcc { @@ -216,8 +221,9 @@ #size-cells = <0>; reg = <5>; /* PS_PMBUS */ - ina226@40 { /* u35 */ + u35: ina226@40 { /* u35 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; reg = <0x40>; shunt-resistor = <10000>; /* MIO31 is alert which should be routed to PMUFW */ diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts index 6647e97edb..6c702f2674 100644 --- a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts @@ -34,3 +34,7 @@ reg = <0xe0 0x3>; }; }; + +&sdhci1 { + /delete-property/ no-1-8-v; +}; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 6e22871713..78110c490e 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -64,6 +64,79 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u76 { + compatible = "iio-hwmon"; + io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u87 { + compatible = "iio-hwmon"; + io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; + }; + ina226-u85 { + compatible = "iio-hwmon"; + io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; + }; + ina226-u86 { + compatible = "iio-hwmon"; + io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; + }; + ina226-u93 { + compatible = "iio-hwmon"; + io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; + }; + ina226-u88 { + compatible = "iio-hwmon"; + io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; + }; + ina226-u15 { + compatible = "iio-hwmon"; + io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; + }; + ina226-u92 { + compatible = "iio-hwmon"; + io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u81 { + compatible = "iio-hwmon"; + io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; + }; + ina226-u80 { + compatible = "iio-hwmon"; + io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; + ina226-u16 { + compatible = "iio-hwmon"; + io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; }; &can1 { @@ -110,11 +183,13 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@21 { + phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ }; }; @@ -133,21 +208,11 @@ tca6416_u97: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; - gpio-controller; + gpio-controller; /* IRQ not connected */ #gpio-cells = <2>; - /* - * IRQ not connected - * Lines: - * 0 - PS_GTR_LAN_SEL0 - * 1 - PS_GTR_LAN_SEL1 - * 2 - PS_GTR_LAN_SEL2 - * 3 - PS_GTR_LAN_SEL3 - * 4 - PCI_CLK_DIR_SEL - * 5 - IIC_MUX_RESET_B - * 6 - GEM3_EXP_RESET_B - * 7, 10 - 17 - not connected - */ - + gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3", + "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", + "", "", "", "", "", "", "", "", ""; gtr_sel0 { gpio-hog; gpios = <0 0>; @@ -177,27 +242,12 @@ tca6416_u61: gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; - gpio-controller; + gpio-controller; /* IRQ not connected */ #gpio-cells = <2>; - /* - * IRQ not connected - * Lines: - * 0 - VCCPSPLL_EN - * 1 - MGTRAVCC_EN - * 2 - MGTRAVTT_EN - * 3 - VCCPSDDRPLL_EN - * 4 - MIO26_PMU_INPUT_LS - * 5 - PL_PMBUS_ALERT - * 6 - PS_PMBUS_ALERT - * 7 - MAXIM_PMBUS_ALERT - * 10 - PL_DDR4_VTERM_EN - * 11 - PL_DDR4_VPP_2V5_EN - * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON - * 13 - PS_DIMM_SUSPEND_EN - * 14 - PS_DDR4_VTERM_EN - * 15 - PS_DDR4_VPP_2V5_EN - * 16 - 17 - not connected - */ + gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS", + "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN", + "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN", + "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", ""; }; i2c-mux@75 { /* u60 */ @@ -210,53 +260,73 @@ #size-cells = <0>; reg = <0>; /* PS_PMBUS */ - ina226@40 { /* u76 */ + u76: ina226@40 { /* u76 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u76"; reg = <0x40>; shunt-resistor = <5000>; }; - ina226@41 { /* u77 */ + u77: ina226@41 { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u87 */ + u87: ina226@43 { /* u87 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u87"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u85 */ + u85: ina226@44 { /* u85 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u85"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u86 */ + u86: ina226@45 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u86"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u93 */ + u93: ina226@46 { /* u93 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u93"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u88 */ + u88: ina226@47 { /* u88 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u88"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@4a { /* u15 */ + u15: ina226@4a { /* u15 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u15"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u92 */ + u92: ina226@4b { /* u92 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u92"; reg = <0x4b>; shunt-resistor = <5000>; }; @@ -266,43 +336,59 @@ #size-cells = <0>; reg = <1>; /* PL_PMBUS */ - ina226@40 { /* u79 */ + u79: ina226@40 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u81 */ + u81: ina226@41 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u81"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u80 */ + u80: ina226@42 { /* u80 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u80"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u84 */ + u84: ina226@43 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u16 */ + u16: ina226@44 { /* u16 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u16"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u65 */ + u65: ina226@45 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u74 */ + u74: ina226@46 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u75 */ + u75: ina226@47 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x47>; shunt-resistor = <5000>; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts index af4d86882a..2132024a25 100644 --- a/arch/arm/dts/zynqmp-zcu102-revB.dts +++ b/arch/arm/dts/zynqmp-zcu102-revB.dts @@ -16,11 +16,13 @@ &gem3 { phy-handle = <&phyc>; - phyc: phy@c { + phyc: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ }; /* Cleanup from RevA */ /delete-node/ phy@21; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index c7a3cdcf61..82557c88d2 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -50,15 +50,48 @@ status = "okay"; }; +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index 7df16b047c..e0e7dac010 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -41,6 +41,11 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>; + }; }; &can1 { @@ -51,15 +56,48 @@ status = "okay"; }; +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; @@ -150,8 +188,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - ina226@40 { /* u183 */ + u183: ina226@40 { /* u183 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; reg = <0x40>; shunt-resistor = <5000>; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index 9fd3953fb4..b4dd101330 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -64,6 +64,79 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u76 { + compatible = "iio-hwmon"; + io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u87 { + compatible = "iio-hwmon"; + io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; + }; + ina226-u85 { + compatible = "iio-hwmon"; + io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; + }; + ina226-u86 { + compatible = "iio-hwmon"; + io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; + }; + ina226-u93 { + compatible = "iio-hwmon"; + io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; + }; + ina226-u88 { + compatible = "iio-hwmon"; + io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; + }; + ina226-u15 { + compatible = "iio-hwmon"; + io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; + }; + ina226-u92 { + compatible = "iio-hwmon"; + io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u81 { + compatible = "iio-hwmon"; + io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; + }; + ina226-u80 { + compatible = "iio-hwmon"; + io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; + ina226-u16 { + compatible = "iio-hwmon"; + io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; }; &can1 { @@ -110,11 +183,12 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; @@ -184,53 +258,73 @@ #size-cells = <0>; reg = <0>; /* PS_PMBUS */ - ina226@40 { /* u76 */ + u76: ina226@40 { /* u76 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u76"; reg = <0x40>; shunt-resistor = <5000>; }; - ina226@41 { /* u77 */ + u77: ina226@41 { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u87 */ + u87: ina226@43 { /* u87 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u87"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u85 */ + u85: ina226@44 { /* u85 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u85"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u86 */ + u86: ina226@45 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u86"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u93 */ + u93: ina226@46 { /* u93 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u93"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u88 */ + u88: ina226@47 { /* u88 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u88"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@4a { /* u15 */ + u15: ina226@4a { /* u15 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u15"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u92 */ + u92: ina226@4b { /* u92 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u92"; reg = <0x4b>; shunt-resistor = <5000>; }; @@ -240,43 +334,59 @@ #size-cells = <0>; reg = <1>; /* PL_PMBUS */ - ina226@40 { /* u79 */ + u79: ina226@40 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u81 */ + u81: ina226@41 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u81"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u80 */ + u80: ina226@42 { /* u80 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u80"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u84 */ + u84: ina226@43 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u16 */ + u16: ina226@44 { /* u16 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u16"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u65 */ + u65: ina226@45 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u74 */ + u74: ina226@46 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u75 */ + u75: ina226@47 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x47>; shunt-resistor = <5000>; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index 2e28a3934f..aabf73dd6d 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -64,6 +64,63 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u67 { + compatible = "iio-hwmon"; + io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>; + }; + ina226-u59 { + compatible = "iio-hwmon"; + io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>; + }; + ina226-u61 { + compatible = "iio-hwmon"; + io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>; + }; + ina226-u60 { + compatible = "iio-hwmon"; + io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>; + }; + ina226-u64 { + compatible = "iio-hwmon"; + io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>; + }; + ina226-u69 { + compatible = "iio-hwmon"; + io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>; + }; + ina226-u66 { + compatible = "iio-hwmon"; + io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u63 { + compatible = "iio-hwmon"; + io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>; + }; + ina226-u3 { + compatible = "iio-hwmon"; + io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>; + }; + ina226-u71 { + compatible = "iio-hwmon"; + io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u73 { + compatible = "iio-hwmon"; + io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; }; &dcc { @@ -106,11 +163,12 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; @@ -160,73 +218,101 @@ reg = <0>; /* PS_PMBUS */ /* PMBUS_ALERT done via pca9544 */ - ina226@40 { /* u67 */ + u67: ina226@40 { /* u67 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u67"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u59 */ + u59: ina226@41 { /* u59 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u59"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u61 */ + u61: ina226@42 { /* u61 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u61"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u60 */ + u60: ina226@43 { /* u60 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u60"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@45 { /* u64 */ + u64: ina226@45 { /* u64 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u64"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u69 */ + u69: ina226@46 { /* u69 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u69"; reg = <0x46>; shunt-resistor = <2000>; }; - ina226@47 { /* u66 */ + u66: ina226@47 { /* u66 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u66"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@48 { /* u65 */ + u65: ina226@48 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x48>; shunt-resistor = <5000>; }; - ina226@49 { /* u63 */ + u63: ina226@49 { /* u63 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u63"; reg = <0x49>; shunt-resistor = <5000>; }; - ina226@4a { /* u3 */ + u3: ina226@4a { /* u3 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u3"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u71 */ + u71: ina226@4b { /* u71 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u71"; reg = <0x4b>; shunt-resistor = <5000>; }; - ina226@4c { /* u77 */ + u77: ina226@4c { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x4c>; shunt-resistor = <5000>; }; - ina226@4d { /* u73 */ + u73: ina226@4d { /* u73 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u73"; reg = <0x4d>; shunt-resistor = <5000>; }; - ina226@4e { /* u79 */ + u79: ina226@4e { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x4e>; shunt-resistor = <5000>; }; @@ -332,7 +418,7 @@ reg = <0x5d>; temperature-stability = <50>; factory-fout = <156250000>; - clock-frequency = <148500000>; + clock-frequency = <156250000>; clock-output-names = "si570_mgt"; }; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts new file mode 100644 index 0000000000..dd9cd7b38f --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -0,0 +1,592 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU216 + * + * (C) Copyright 2017 - 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU216 RevA"; + compatible = "xlnx,zynqmp-zcu216-revA", "xlnx,zynqmp-zcu216", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + ina226-vccint { + compatible = "iio-hwmon"; + io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>; + }; + ina226-vccint-io-bram-ps { + compatible = "iio-hwmon"; + io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>; + }; + ina226-vcc1v8 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>; + }; + ina226-vcc1v2 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>; + }; + ina226-vadj-fmc { + compatible = "iio-hwmon"; + io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>; + }; + ina226-mgtavcc { + compatible = "iio-hwmon"; + io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>; + }; + ina226-mgt1v2 { + compatible = "iio-hwmon"; + io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>; + }; + ina226-mgt1v8 { + compatible = "iio-hwmon"; + io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>; + }; + ina226-vccint-ams { + compatible = "iio-hwmon"; + io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>; + }; + ina226-dac-avtt { + compatible = "iio-hwmon"; + io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>; + }; + ina226-dac-avccaux { + compatible = "iio-hwmon"; + io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>; + }; + ina226-adc-avcc { + compatible = "iio-hwmon"; + io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>; + }; + ina226-adc-avccaux { + compatible = "iio-hwmon"; + io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>; + }; + ina226-dac-avcc { + compatible = "iio-hwmon"; + io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>; + }; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: ethernet-phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */ + "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */ + "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */ + "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */ + "", "", "BUTTON", "LED", "", /* 20 - 24 */ + "", "PMU_INPUT", "", "", "", /* 25 - 29 */ + "", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */ + "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */ + "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */ + "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */ + "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */ + "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */ + "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */ + "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */ + "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */ + "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 -89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u15: gpio@20 { /* u15 */ + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "", /* 0 - 3 */ + "", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */ + "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */ + "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */ + }; + + i2c-mux@75 { /* u17 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + /* PMBUS_ALERT done via pca9544 */ + vccint: ina226@40 { /* u65 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vccint_io_bram_ps: ina226@41 { /* u57 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint-io-bram-ps"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + vcc1v8: ina226@42 { /* u60 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v8"; + reg = <0x42>; + shunt-resistor = <2000>; + }; + vcc1v2: ina226@43 { /* u58 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v2"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vadj_fmc: ina226@45 { /* u62 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vadj-fmc"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + mgtavcc: ina226@46 { /* u67 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgtavcc"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + mgt1v2: ina226@47 { /* u63 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgt1v2"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + mgt1v8: ina226@48 { /* u64 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgt1v8"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + vccint_ams: ina226@49 { /* u61 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint-ams"; + reg = <0x49>; + shunt-resistor = <2000>; + }; + dac_avtt: ina226@4a { /* u59 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-dac-avtt"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + dac_avccaux: ina226@4b { /* u124 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-dac-avccaux"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + adc_avcc: ina226@4c { /* u75 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-adc-avcc"; + reg = <0x4c>; + shunt-resistor = <5000>; + }; + adc_avccaux: ina226@4d { /* u71 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-adc-avccaux"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + dac_avcc: ina226@4e { /* u77 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-dac-avcc"; + reg = <0x4e>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* u104 - ir35215 0x10/0x40 */ + /* u127 - ir38164 0x1b/0x4b */ + /* u112 - ir38164 0x13/0x43 */ + /* u123 - ir38164 0x1c/0x4c */ + + irps5401_44: irps54012@44 { /* IRPS5401 - u53 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x44>; /* i2c addr 0x14 */ + }; + irps5401_45: irps54012@45 { /* IRPS5401 - u55 */ + #clock-cells = <0>; + compatible = "infineon,irps5401"; + reg = <0x45>; /* i2c addr 0x15 */ + }; + /* J21 header too */ + + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* SYSMON */ + }; + }; + /* u38 MPS430 */ +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + i2c-mux@74 { + compatible = "nxp,pca9548"; /* u20 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c_eeprom: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u21 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c_si5341: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u43 */ + compatible = "si5341"; + reg = <0x36>; + }; + + }; + i2c_si570_user_c0: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + clock-output-names = "si570_user_c0"; + }; + }; + i2c_si570_mgt: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + clock-output-names = "si570_mgt"; + }; + }; + i2c_8a34001: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* U409B - 8a34001 */ + }; + i2c_clk104: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* CLK104_SDA */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* RFMCP connector */ + }; + /* 7 NC */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u22 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* FMCP_HSPC_IIC */ + }; + i2c_si570_user_c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + clock-output-names = "si570_user_c1"; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SFP3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SFP2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SFP1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SFP0 */ + }; + }; + /* MSP430 */ +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&serdes { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; +}; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 8e35171dd0..b453941baf 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -12,6 +12,9 @@ * the License, or (at your option) any later version. */ +#include <dt-bindings/power/xlnx-zynqmp-power.h> +#include <dt-bindings/reset/xlnx-zynqmp-resets.h> + / { compatible = "xlnx,zynqmp"; #address-cells = <2>; @@ -112,7 +115,7 @@ <0x0 0xff9905e0 0x0 0x20>, <0x0 0xff990e80 0x0 0x20>, <0x0 0xff990ea0 0x0 0x20>; - reg-names = "local_request_region" , "local_response_region", + reg-names = "local_request_region", "local_response_region", "remote_request_region", "remote_response_region"; #mbox-cells = <1>; xlnx,ipi-id = <4>; @@ -140,7 +143,7 @@ }; firmware { - zynqmp-firmware { + zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; method = "smc"; #power-domain-cells = <0x1>; @@ -154,6 +157,11 @@ mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>; mbox-names = "tx", "rx"; }; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; }; }; @@ -279,6 +287,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + power-domains = <&zynqmp_firmware PD_CAN_0>; }; can1: can@ff070000 { @@ -290,6 +299,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + power-domains = <&zynqmp_firmware PD_CAN_1>; }; cci: cci@fd6e0000 { @@ -322,6 +332,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14e8>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan2: dma@fd510000 { @@ -334,6 +345,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14e9>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan3: dma@fd520000 { @@ -346,6 +358,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ea>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan4: dma@fd530000 { @@ -358,6 +371,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14eb>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan5: dma@fd540000 { @@ -370,6 +384,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ec>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan6: dma@fd550000 { @@ -382,6 +397,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ed>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan7: dma@fd560000 { @@ -394,6 +410,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ee>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan8: dma@fd570000 { @@ -406,6 +423,7 @@ xlnx,bus-width = <128>; #stream-id-cells = <1>; iommus = <&smmu 0x14ef>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; gpu: gpu@fd4b0000 { @@ -416,6 +434,7 @@ interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>; interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1"; clock-names = "gpu", "gpu_pp0", "gpu_pp1"; + power-domains = <&zynqmp_firmware PD_GPU>; }; /* LPDDMA default allows only secured access. inorder to enable @@ -432,6 +451,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x868>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan2: dma@ffa90000 { @@ -444,6 +464,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x869>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan3: dma@ffaa0000 { @@ -456,6 +477,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86a>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan4: dma@ffab0000 { @@ -468,6 +490,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86b>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan5: dma@ffac0000 { @@ -480,6 +503,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86c>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan6: dma@ffad0000 { @@ -492,6 +516,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86d>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan7: dma@ffae0000 { @@ -504,6 +529,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86e>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan8: dma@ffaf0000 { @@ -516,6 +542,7 @@ xlnx,bus-width = <64>; #stream-id-cells = <1>; iommus = <&smmu 0x86f>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; mc: memory-controller@fd070000 { @@ -532,14 +559,15 @@ clock-names = "clk_sys", "clk_flash"; interrupt-parent = <&gic>; interrupts = <0 14 4>; - #address-cells = <2>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x872>; + power-domains = <&zynqmp_firmware PD_NAND>; }; gem0: ethernet@ff0b0000 { - compatible = "cdns,zynqmp-gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; @@ -549,10 +577,11 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x874>; + power-domains = <&zynqmp_firmware PD_ETH_0>; }; gem1: ethernet@ff0c0000 { - compatible = "cdns,zynqmp-gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; @@ -562,10 +591,11 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x875>; + power-domains = <&zynqmp_firmware PD_ETH_1>; }; gem2: ethernet@ff0d0000 { - compatible = "cdns,zynqmp-gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; @@ -575,10 +605,11 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x876>; + power-domains = <&zynqmp_firmware PD_ETH_2>; }; gem3: ethernet@ff0e0000 { - compatible = "cdns,zynqmp-gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; @@ -588,6 +619,7 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x877>; + power-domains = <&zynqmp_firmware PD_ETH_3>; }; gpio: gpio@ff0a0000 { @@ -600,6 +632,7 @@ #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x0 0x1000>; gpio-controller; + power-domains = <&zynqmp_firmware PD_GPIO>; }; i2c0: i2c@ff020000 { @@ -610,6 +643,7 @@ reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_I2C_0>; }; i2c1: i2c@ff030000 { @@ -620,6 +654,7 @@ reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_I2C_1>; }; ocm: memory-controller@ff960000 { @@ -658,6 +693,7 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -679,6 +715,7 @@ #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x873>; + power-domains = <&zynqmp_firmware PD_QSPI>; }; rtc: rtc@ffa60000 { @@ -700,10 +737,18 @@ reg-names = "serdes", "siou", "lpd"; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; - resets = <&rst 16>, <&rst 59>, <&rst 60>, - <&rst 61>, <&rst 62>, <&rst 63>, - <&rst 64>, <&rst 3>, <&rst 29>, - <&rst 30>, <&rst 31>, <&rst 32>; + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>, + <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB0_APB>, + <&zynqmp_reset ZYNQMP_RESET_USB1_APB>, + <&zynqmp_reset ZYNQMP_RESET_DP>, + <&zynqmp_reset ZYNQMP_RESET_GEM0>, + <&zynqmp_reset ZYNQMP_RESET_GEM1>, + <&zynqmp_reset ZYNQMP_RESET_GEM2>, + <&zynqmp_reset ZYNQMP_RESET_GEM3>; reset-names = "sata_rst", "usb0_crst", "usb1_crst", "usb0_hibrst", "usb1_hibrst", "usb0_apbrst", "usb1_apbrst", "dp_rst", "gem0_rst", @@ -728,6 +773,7 @@ reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 133 4>; + power-domains = <&zynqmp_firmware PD_SATA>; #stream-id-cells = <4>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; @@ -745,6 +791,7 @@ xlnx,device_id = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x870>; + power-domains = <&zynqmp_firmware PD_SD_0>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; }; @@ -760,6 +807,7 @@ xlnx,device_id = <1>; #stream-id-cells = <1>; iommus = <&smmu 0x871>; + power-domains = <&zynqmp_firmware PD_SD_1>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; }; @@ -793,6 +841,7 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_SPI_0>; }; spi1: spi@ff050000 { @@ -804,6 +853,7 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_SPI_1>; }; ttc0: timer@ff110000 { @@ -813,6 +863,7 @@ interrupts = <0 36 4>, <0 37 4>, <0 38 4>; reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_0>; }; ttc1: timer@ff120000 { @@ -822,6 +873,7 @@ interrupts = <0 39 4>, <0 40 4>, <0 41 4>; reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_1>; }; ttc2: timer@ff130000 { @@ -831,6 +883,7 @@ interrupts = <0 42 4>, <0 43 4>, <0 44 4>; reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_2>; }; ttc3: timer@ff140000 { @@ -840,6 +893,7 @@ interrupts = <0 45 4>, <0 46 4>, <0 47 4>; reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_3>; }; uart0: serial@ff000000 { @@ -850,6 +904,7 @@ interrupts = <0 21 4>; reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; + power-domains = <&zynqmp_firmware PD_UART_0>; }; uart1: serial@ff010000 { @@ -860,6 +915,7 @@ interrupts = <0 22 4>; reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; + power-domains = <&zynqmp_firmware PD_UART_1>; }; usb0: usb0@ff9d0000 { @@ -869,6 +925,7 @@ compatible = "xlnx,zynqmp-dwc3"; reg = <0x0 0xff9d0000 0x0 0x100>; clock-names = "bus_clk", "ref_clk"; + power-domains = <&zynqmp_firmware PD_USB_0>; ranges; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; @@ -894,6 +951,7 @@ compatible = "xlnx,zynqmp-dwc3"; reg = <0x0 0xff9e0000 0x0 0x100>; clock-names = "bus_clk", "ref_clk"; + power-domains = <&zynqmp_firmware PD_USB_1>; ranges; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; @@ -922,6 +980,15 @@ reset-on-timeout; }; + lpd_watchdog: watchdog@ff150000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xff150000 0x0 0x1000>; + timeout-sec = <10>; + }; + xilinx_ams: ams@ffa50000 { compatible = "xlnx,zynqmp-ams"; status = "disabled"; @@ -986,6 +1053,7 @@ interrupts = <0 122 4>; interrupt-parent = <&gic>; clock-names = "axi_clk"; + power-domains = <&zynqmp_firmware PD_DP>; dma-channels = <6>; #dma-cells = <1>; dma-video0channel { diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c index 49f1e51c8e..6ee6cd43ec 100644 --- a/arch/arm/mach-versal/cpu.c +++ b/arch/arm/mach-versal/cpu.c @@ -107,28 +107,3 @@ int reserve_mmu(void) return 0; } #endif - -int versal_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, - u32 arg3, u32 *ret_payload) -{ - struct pt_regs regs; - - if (current_el() == 3) - return 0; - - regs.regs[0] = PM_SIP_SVC | api_id; - regs.regs[1] = ((u64)arg1 << 32) | arg0; - regs.regs[2] = ((u64)arg3 << 32) | arg2; - - smc_call(®s); - - if (ret_payload) { - ret_payload[0] = (u32)regs.regs[0]; - ret_payload[1] = upper_32_bits(regs.regs[0]); - ret_payload[2] = (u32)regs.regs[1]; - ret_payload[3] = upper_32_bits(regs.regs[1]); - ret_payload[4] = (u32)regs.regs[2]; - } - - return regs.regs[0]; -} diff --git a/arch/arm/mach-versal/include/mach/sys_proto.h b/arch/arm/mach-versal/include/mach/sys_proto.h index 2f5ad02bf4..31af049a21 100644 --- a/arch/arm/mach-versal/include/mach/sys_proto.h +++ b/arch/arm/mach-versal/include/mach/sys_proto.h @@ -8,65 +8,7 @@ enum { TCM_SPLIT, }; -enum pm_api_id { - PM_GET_API_VERSION = 1, - PM_SET_CONFIGURATION, - PM_GET_NODE_STATUS, - PM_GET_OPERATING_CHARACTERISTIC, - PM_REGISTER_NOTIFIER, - PM_REQUEST_SUSPEND, - PM_SELF_SUSPEND, - PM_FORCE_POWERDOWN, - PM_ABORT_SUSPEND, - PM_REQUEST_WAKEUP, - PM_SET_WAKEUP_SOURCE, - PM_SYSTEM_SHUTDOWN, - PM_REQUEST_NODE, - PM_RELEASE_NODE, - PM_SET_REQUIREMENT, - PM_SET_MAX_LATENCY, - PM_RESET_ASSERT, - PM_RESET_GET_STATUS, - PM_MMIO_WRITE, - PM_MMIO_READ, - PM_PM_INIT_FINALIZE, - PM_FPGA_LOAD, - PM_FPGA_GET_STATUS, - PM_GET_CHIPID, - PM_SECURE_SHA = 26, - PM_SECURE_RSA, - PM_PINCTRL_REQUEST, - PM_PINCTRL_RELEASE, - PM_PINCTRL_GET_FUNCTION, - PM_PINCTRL_SET_FUNCTION, - PM_PINCTRL_CONFIG_PARAM_GET, - PM_PINCTRL_CONFIG_PARAM_SET, - PM_IOCTL, - PM_QUERY_DATA, - PM_CLOCK_ENABLE, - PM_CLOCK_DISABLE, - PM_CLOCK_GETSTATE, - PM_CLOCK_SETDIVIDER, - PM_CLOCK_GETDIVIDER, - PM_CLOCK_SETRATE, - PM_CLOCK_GETRATE, - PM_CLOCK_SETPARENT, - PM_CLOCK_GETPARENT, - PM_SECURE_IMAGE, - PM_FPGA_READ = 46, - PM_SECURE_AES, - PM_CLOCK_PLL_GETPARAM = 49, - PM_REGISTER_ACCESS = 52, - PM_EFUSE_ACCESS, - PM_FEATURE_CHECK = 63, - PM_API_MAX, -}; - -#define PM_SIP_SVC 0xC2000000 #define PAYLOAD_ARG_CNT 4U void tcm_init(u8 mode); void mem_map_fill(void); - -int versal_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, - u32 arg3, u32 *ret_payload); diff --git a/arch/arm/mach-zynqmp/cpu.c b/arch/arm/mach-zynqmp/cpu.c index bb21cbcadf..b90d08bbdd 100644 --- a/arch/arm/mach-zynqmp/cpu.c +++ b/arch/arm/mach-zynqmp/cpu.c @@ -151,35 +151,6 @@ unsigned int zynqmp_get_silicon_version(void) return ZYNQMP_CSU_VERSION_SILICON; } -#define ZYNQMP_MMIO_READ 0xC2000014 -#define ZYNQMP_MMIO_WRITE 0xC2000013 - -int __maybe_unused invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, - u32 arg3, u32 *ret_payload) -{ - /* - * Added SIP service call Function Identifier - * Make sure to stay in x0 register - */ - struct pt_regs regs; - - regs.regs[0] = pm_api_id; - regs.regs[1] = ((u64)arg1 << 32) | arg0; - regs.regs[2] = ((u64)arg3 << 32) | arg2; - - smc_call(®s); - - if (ret_payload != NULL) { - ret_payload[0] = (u32)regs.regs[0]; - ret_payload[1] = upper_32_bits(regs.regs[0]); - ret_payload[2] = (u32)regs.regs[1]; - ret_payload[3] = upper_32_bits(regs.regs[1]); - ret_payload[4] = (u32)regs.regs[2]; - } - - return regs.regs[0]; -} - static int zynqmp_mmio_rawwrite(const u32 address, const u32 mask, const u32 value) @@ -211,28 +182,34 @@ int zynqmp_mmio_write(const u32 address, { if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) return zynqmp_mmio_rawwrite(address, mask, value); +#if defined(CONFIG_ZYNQMP_FIRMWARE) else - return invoke_smc(ZYNQMP_MMIO_WRITE, address, mask, - value, 0, NULL); + return xilinx_pm_request(PM_MMIO_WRITE, address, mask, + value, 0, NULL); +#endif return -EINVAL; } int zynqmp_mmio_read(const u32 address, u32 *value) { - u32 ret_payload[PAYLOAD_ARG_CNT]; - u32 ret; + u32 ret = -EINVAL; if (!value) - return -EINVAL; + return ret; if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { ret = zynqmp_mmio_rawread(address, value); - } else { - ret = invoke_smc(ZYNQMP_MMIO_READ, address, 0, 0, - 0, ret_payload); + } +#if defined(CONFIG_ZYNQMP_FIRMWARE) + else { + u32 ret_payload[PAYLOAD_ARG_CNT]; + + ret = xilinx_pm_request(PM_MMIO_READ, address, 0, 0, + 0, ret_payload); *value = ret_payload[1]; } +#endif return ret; } diff --git a/arch/arm/mach-zynqmp/include/mach/sys_proto.h b/arch/arm/mach-zynqmp/include/mach/sys_proto.h index 69e729fb76..10b70761de 100644 --- a/arch/arm/mach-zynqmp/include/mach/sys_proto.h +++ b/arch/arm/mach-zynqmp/include/mach/sys_proto.h @@ -50,8 +50,6 @@ void handoff_setup(void); int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value); int zynqmp_mmio_read(const u32 address, u32 *value); -int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3, - u32 *ret_payload); void initialize_tcm(bool mode); void mem_map_fill(void); diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 22903e3bc4..cbec299b7d 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -244,7 +244,7 @@ relocate_code: bneid r12, 1b addi r5, r5, 4 /* Increment to next loc - relocate code */ - /* R23 points to the base address. */ + /* R23 points to the base address. */ add r23, r0, r7 /* Move reloc addr to r23 */ addi r24, r0, CONFIG_SYS_TEXT_BASE /* Get reloc offset */ rsub r23, r24, r23 /* keep - this is already here gd->reloc_off */ diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 11e534715d..01c5d57bc5 100644 --- a/arch/microblaze/lib/bootm.c +++ b/arch/microblaze/lib/bootm.c @@ -66,12 +66,15 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) thekernel = (void (*)(char *, ulong, ulong))images->ep; -#ifdef DEBUG - printf("## Transferring control to Linux (at address 0x%08lx) ", - (ulong)thekernel); - printf("cmdline 0x%08lx, ramdisk 0x%08lx, FDT 0x%08lx...\n", - cmdline, rd_start, dt); -#endif + debug("## Transferring control to Linux (at address 0x%08lx) ", + (ulong)thekernel); + debug("cmdline 0x%08lx, ramdisk 0x%08lx, FDT 0x%08lx...\n", + cmdline, rd_start, dt); + bootstage_mark(BOOTSTAGE_ID_RUN_OS); + + printf("\nStarting kernel ...%s\n\n", fake ? + "(fake run for tracing)" : ""); + bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel"); #ifdef XILINX_USE_DCACHE flush_cache(0, XILINX_DCACHE_BYTE_SIZE); @@ -92,7 +95,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) static void boot_prep_linux(bootm_headers_t *images) { if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { - printf("using: FDT\n"); + debug("using: FDT\n"); if (image_setup_linux(images)) { printf("FDT creation failed! hanging..."); hang(); diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 7cfe69db69..8a216ed619 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -19,13 +19,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOARD_EARLY_INIT_F) -int board_early_init_f(void) -{ - return 0; -} -#endif - int board_init(void) { return 0; diff --git a/board/xilinx/zynqmp/cmds.c b/board/xilinx/zynqmp/cmds.c index f53a1b63be..d3bb57a2e9 100644 --- a/board/xilinx/zynqmp/cmds.c +++ b/board/xilinx/zynqmp/cmds.c @@ -51,8 +51,8 @@ static int do_zynqmp_verify_secure(cmd_tbl_t *cmdtp, int flag, int argc, (ulong)(key_ptr + KEY_PTR_LEN)); } - ret = invoke_smc(ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD, src_lo, src_hi, - key_lo, key_hi, ret_payload); + ret = xilinx_pm_request(PM_SECURE_IMAGE, src_lo, src_hi, + key_lo, key_hi, ret_payload); if (ret) { printf("Failed: secure op status:0x%x\n", ret); } else { diff --git a/cmd/Kconfig b/cmd/Kconfig index 07060c63a7..82b5d300d2 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1205,6 +1205,13 @@ config CMD_TSI148 This provides various sub-commands to initialise and configure the Turndra tsi148 device. See the command help for full details. +config CMD_UFS + bool "Enable UFS - Universal Flash Subsystem commands" + depends on UFS + help + "This provides commands to initialise and configure universal flash + subsystem devices" + config CMD_UNIVERSE bool "universe - Command to set up the Turndra Universe controller" help diff --git a/cmd/Makefile b/cmd/Makefile index ac843b4b16..2d723ea0f0 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -144,7 +144,7 @@ obj-$(CONFIG_CMD_UNZIP) += unzip.o obj-$(CONFIG_CMD_VIRTIO) += virtio.o obj-$(CONFIG_CMD_WDT) += wdt.o obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o - +obj-$(CONFIG_CMD_UFS) += ufs.o obj-$(CONFIG_CMD_USB) += usb.o disk.o obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o obj-$(CONFIG_CMD_FS_UUID) += fs_uuid.o diff --git a/cmd/ufs.c b/cmd/ufs.c new file mode 100644 index 0000000000..5b25788656 --- /dev/null +++ b/cmd/ufs.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ +/** + * ufs.c - UFS specific U-boot commands + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + * + */ +#include <common.h> +#include <command.h> +#include <ufs.h> + +static int do_ufs(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int dev, ret; + + if (argc >= 2) { + if (!strcmp(argv[1], "init")) { + if (argc == 3) { + dev = simple_strtoul(argv[2], NULL, 10); + ret = ufs_probe_dev(dev); + if (ret) + return CMD_RET_FAILURE; + } else { + ufs_probe(); + } + + return CMD_RET_SUCCESS; + } + } + + return CMD_RET_USAGE; +} + +U_BOOT_CMD(ufs, 3, 1, do_ufs, + "UFS sub system", + "init [dev] - init UFS subsystem\n" +); diff --git a/common/command.c b/common/command.c index 4b887a267f..ceca992510 100644 --- a/common/command.c +++ b/common/command.c @@ -496,6 +496,11 @@ void fixup_cmdtable(cmd_tbl_t *cmdtp, int size) for (i = 0; i < size; i++) { ulong addr; + addr = (ulong)(cmdtp->cmd_rep) + gd->reloc_off; + cmdtp->cmd_rep = + (int (*)(struct cmd_tbl_s *, int, int, + char * const [], int *))addr; + addr = (ulong)(cmdtp->cmd) + gd->reloc_off; #ifdef DEBUG_COMMANDS printf("Command \"%s\": 0x%08lx => 0x%08lx\n", diff --git a/common/hash.c b/common/hash.c index d33e329897..d0d825e389 100644 --- a/common/hash.c +++ b/common/hash.c @@ -30,6 +30,12 @@ #include <u-boot/sha256.h> #include <u-boot/md5.h> +#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC) +DECLARE_GLOBAL_DATA_PTR; +#endif + +static void reloc_update(void); + #if defined(CONFIG_SHA1) && !defined(CONFIG_SHA_PROG_HW_ACCEL) static int hash_init_sha1(struct hash_algo *algo, void **ctxp) { @@ -215,10 +221,31 @@ static struct hash_algo hash_algo[] = { #define multi_hash() 0 #endif +static void reloc_update(void) +{ +#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC) + int i; + static bool done; + + if (!done) { + done = true; + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { + hash_algo[i].name += gd->reloc_off; + hash_algo[i].hash_func_ws += gd->reloc_off; + hash_algo[i].hash_init += gd->reloc_off; + hash_algo[i].hash_update += gd->reloc_off; + hash_algo[i].hash_finish += gd->reloc_off; + } + } +#endif +} + int hash_lookup_algo(const char *algo_name, struct hash_algo **algop) { int i; + reloc_update(); + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { if (!strcmp(algo_name, hash_algo[i].name)) { *algop = &hash_algo[i]; @@ -235,6 +262,8 @@ int hash_progressive_lookup_algo(const char *algo_name, { int i; + reloc_update(); + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { if (!strcmp(algo_name, hash_algo[i].name)) { if (hash_algo[i].hash_init) { diff --git a/common/image-sig.c b/common/image-sig.c index 004fbc525b..639a112450 100644 --- a/common/image-sig.c +++ b/common/image-sig.c @@ -89,6 +89,21 @@ struct checksum_algo *image_get_checksum_algo(const char *full_name) int i; const char *name; +#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC) + static bool done; + + if (!done) { + done = true; + for (i = 0; i < ARRAY_SIZE(checksum_algos); i++) { + checksum_algos[i].name += gd->reloc_off; +#if IMAGE_ENABLE_SIGN + checksum_algos[i].calculate_sign += gd->reloc_off; +#endif + checksum_algos[i].calculate += gd->reloc_off; + } + } +#endif + for (i = 0; i < ARRAY_SIZE(checksum_algos); i++) { name = checksum_algos[i].name; /* Make sure names match and next char is a comma */ @@ -105,6 +120,20 @@ struct crypto_algo *image_get_crypto_algo(const char *full_name) int i; const char *name; +#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC) + static bool done; + + if (!done) { + done = true; + for (i = 0; i < ARRAY_SIZE(crypto_algos); i++) { + crypto_algos[i].name += gd->reloc_off; + crypto_algos[i].sign += gd->reloc_off; + crypto_algos[i].add_verify_data += gd->reloc_off; + crypto_algos[i].verify += gd->reloc_off; + } + } +#endif + /* Move name to after the comma */ name = strchr(full_name, ','); if (!name) diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig index b5e61e621a..f0aa4d1242 100644 --- a/configs/avnet_ultra96_rev1_defconfig +++ b/configs/avnet_ultra96_rev1_defconfig @@ -58,6 +58,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index 6729e03620..b79fe14a5a 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -34,13 +34,15 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SF=y +CONFIG_CMD_UFS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-common-proc-board" @@ -63,6 +65,15 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_AM654=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_MTD_DEVICE=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_CFI_FLASH=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_HBMC_AM654=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y @@ -77,6 +88,8 @@ CONFIG_REMOTEPROC_TI_K3_DSP=y CONFIG_REMOTEPROC_TI_K3_R5F=y CONFIG_DM_RESET=y CONFIG_RESET_TI_SCI=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y @@ -84,4 +97,9 @@ CONFIG_CADENCE_QSPI=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y +CONFIG_UFS=y +CONFIG_CADENCE_UFS=y +CONFIG_TI_J721E_UFS=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus" +CONFIG_MTDPARTS_DEFAULT="mtdparts=47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs)" diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index 742aa1208a..afcbed389f 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -4,7 +4,7 @@ CONFIG_SYS_ICACHE_OFF=y CONFIG_ARCH_VERSAL=y CONFIG_SYS_TEXT_BASE=0xFFFC0000 CONFIG_ENV_SIZE=0x80 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_NR_DRAM_BANKS=3 CONFIG_SYS_MALLOC_LEN=0x2000 CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_COUNTER_FREQUENCY=2720000 @@ -20,7 +20,6 @@ CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="Versal> " # CONFIG_AUTOBOOT is not set -# CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 3ff23a2b2b..1717039dc0 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -1,13 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_VERSAL=y CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SYS_MALLOC_F_LEN=0x100000 CONFIG_COUNTER_FREQUENCY=62500000 CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set -CONFIG_BOOTDELAY=-1 +CONFIG_BOOTDELAY=5 CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set @@ -17,11 +17,15 @@ CONFIG_SYS_PROMPT="Versal> " CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_MII=y @@ -43,11 +47,19 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_CLK_VERSAL=y +CONFIG_DFU_RAM=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_VERSALPL=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y +CONFIG_MISC=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000 CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y @@ -68,5 +80,23 @@ CONFIG_ZYNQ_GEM=y CONFIG_PL01X_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_THOR=y CONFIG_FAT_WRITE=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig index 3498483f4b..e5e2b54ae3 100644 --- a/configs/xilinx_zynqmp_a2197_revA_defconfig +++ b/configs/xilinx_zynqmp_a2197_revA_defconfig @@ -43,7 +43,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" -CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA zynqmp-a2197-m-revA" +CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-g-a2197-00-revA zynqmp-p-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y diff --git a/configs/xilinx_zynqmp_a2197_m_revA_defconfig b/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig index fb4020b2df..33f9f44c16 100644 --- a/configs/xilinx_zynqmp_a2197_m_revA_defconfig +++ b/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig @@ -42,7 +42,7 @@ CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-m-revA" +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-e-a2197-00-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y diff --git a/configs/xilinx_zynqmp_a2197_g_revA_defconfig b/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig index 47a98c6d4d..9cc9191a41 100644 --- a/configs/xilinx_zynqmp_a2197_g_revA_defconfig +++ b/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig @@ -42,7 +42,7 @@ CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-g-revA" +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-g-a2197-00-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y diff --git a/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig new file mode 100644 index 0000000000..ea6c6b9b01 --- /dev/null +++ b/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig @@ -0,0 +1,115 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-01-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig new file mode 100644 index 0000000000..c77faf509a --- /dev/null +++ b/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig @@ -0,0 +1,115 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-02-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig new file mode 100644 index 0000000000..3b57535c3a --- /dev/null +++ b/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig @@ -0,0 +1,115 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-03-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig new file mode 100644 index 0000000000..f2c2b17527 --- /dev/null +++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig @@ -0,0 +1,51 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_nand" +CONFIG_SYS_ICACHE_OFF=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x10000 +CONFIG_ENV_SIZE=0x80 +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_CMD_ZYNQMP is not set +CONFIG_FIT=y +CONFIG_SUPPORT_RAW_INITRD=y +# CONFIG_BOARD_LATE_INIT is not set +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +# CONFIG_CMDLINE_EDITING is not set +# CONFIG_AUTO_COMPLETE is not set +# CONFIG_SYS_LONGHELP is not set +# CONFIG_AUTOBOOT is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_BOOTI is not set +# CONFIG_CMD_GO is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_DM is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_MP is not set +# CONFIG_PARTITIONS is not set +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" +# CONFIG_NET is not set +# CONFIG_DM_WARN is not set +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_MMC is not set +CONFIG_NAND=y +CONFIG_NAND_ARASAN=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index 383f868625..2afd746970 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -55,11 +55,13 @@ CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI=y CONFIG_ZYNQMP_GQSPI=y # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_a2197_p_revA_defconfig b/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig index d19c6b34ca..a7c4c79eba 100644 --- a/configs/xilinx_zynqmp_a2197_p_revA_defconfig +++ b/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig @@ -43,7 +43,7 @@ CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-p-revA" +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-p-a2197-00-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig index 255217df4b..c86ab5c363 100644 --- a/configs/xilinx_zynqmp_zc1232_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig @@ -36,6 +36,7 @@ CONFIG_FPGA_ZYNQMPPL=y CONFIG_MISC=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig index e058195842..f1d127d07c 100644 --- a/configs/xilinx_zynqmp_zc1254_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1254_revA_defconfig @@ -36,6 +36,7 @@ CONFIG_FPGA_ZYNQMPPL=y CONFIG_MISC=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index bbf387a6b0..31e2130984 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -61,6 +61,7 @@ CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig index a5a7fc2aeb..75aa35b5dd 100644 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig @@ -46,6 +46,7 @@ CONFIG_MISC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig index fc917f0b5d..6dfceee27a 100644 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig @@ -57,6 +57,7 @@ CONFIG_MISC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index b64956d5f6..549e802d26 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -75,6 +75,7 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index 8b1a1ce0a2..d22724d866 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -74,6 +74,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 2aab26dd3f..a4b8f12a5e 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -74,6 +74,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig index 07e58b192a..60c89bf7e4 100644 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig @@ -58,6 +58,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 4829df62b4..0a5788c8c2 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -62,6 +62,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig index 72b3ce16a8..0ed1707b56 100644 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig @@ -68,6 +68,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig index de739ed3b5..dad77ba0b4 100644 --- a/configs/xilinx_zynqmp_zcu111_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu111_revA_defconfig @@ -60,6 +60,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu1275_revA_defconfig b/configs/xilinx_zynqmp_zcu1275_revA_defconfig index d86c5d1a76..cd28dbe1e3 100644 --- a/configs/xilinx_zynqmp_zcu1275_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revA_defconfig @@ -36,6 +36,7 @@ CONFIG_FPGA_ZYNQMPPL=y CONFIG_MISC=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/xilinx_zynqmp_zcu1275_revB_defconfig b/configs/xilinx_zynqmp_zcu1275_revB_defconfig index 957b883abd..5030912c0f 100644 --- a/configs/xilinx_zynqmp_zcu1275_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revB_defconfig @@ -39,6 +39,7 @@ CONFIG_MISC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y @@ -46,6 +47,10 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHY_MARVELL=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_PHY_XILINX_GMII2RGMII=y +CONFIG_MII=y CONFIG_ZYNQ_GEM=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_ANNOUNCE=y diff --git a/configs/xilinx_zynqmp_zcu216_revA_defconfig b/configs/xilinx_zynqmp_zcu216_revA_defconfig new file mode 100644 index 0000000000..4854ebcf56 --- /dev/null +++ b/configs/xilinx_zynqmp_zcu216_revA_defconfig @@ -0,0 +1,98 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu111-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/zynq_cc108_defconfig b/configs/zynq_cc108_defconfig index 495c5df608..3980c5ecbc 100644 --- a/configs/zynq_cc108_defconfig +++ b/configs/zynq_cc108_defconfig @@ -18,6 +18,7 @@ CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index 0cc6976c76..f63855665a 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -32,6 +32,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_ELF is not set +# CONFIG_CMD_FDT is not set # CONFIG_CMD_GO is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_IMI is not set @@ -41,6 +42,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set # CONFIG_CMD_CLK is not set # CONFIG_CMD_DM is not set @@ -67,6 +69,7 @@ CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DEBUG_UART_ARM_DCC=y CONFIG_ZYNQ_QSPI=y # CONFIG_EFI_LOADER is not set diff --git a/configs/zynq_dlc20_rev1_0_defconfig b/configs/zynq_dlc20_rev1_0_defconfig index 00d1a598dd..9272a3f660 100644 --- a/configs/zynq_dlc20_rev1_0_defconfig +++ b/configs/zynq_dlc20_rev1_0_defconfig @@ -16,11 +16,11 @@ CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 751d3735ba..3724b8e9cb 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig index d9657f9621..e3acee1239 100644 --- a/configs/zynq_minized_defconfig +++ b/configs/zynq_minized_defconfig @@ -16,6 +16,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index c72307a89d..b550b90e99 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_virt_defconfig b/configs/zynq_virt_defconfig index 58ce970a1b..807e71f123 100644 --- a/configs/zynq_virt_defconfig +++ b/configs/zynq_virt_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig index 799277c58e..a231dcadaf 100644 --- a/configs/zynq_z_turn_defconfig +++ b/configs/zynq_z_turn_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 74e8b3e32e..f64bf18751 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index f831039158..36a9204be2 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -23,6 +23,7 @@ CONFIG_SPL_FPGA_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 301bc2dffd..fff8ddc3fb 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 8bc49ea066..72fceeb494 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -19,6 +19,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y +# CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm011_x16_defconfig b/configs/zynq_zc770_xm011_x16_defconfig index 70429a2f25..279dfed373 100644 --- a/configs/zynq_zc770_xm011_x16_defconfig +++ b/configs/zynq_zc770_xm011_x16_defconfig @@ -19,6 +19,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y +# CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 78cdd9c9c7..997836ca38 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -16,6 +16,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_IMLS=y CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index c6678784af..674a715736 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 38bf3e45e6..cfc637b408 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 71d1638d45..3eaa4b4f0e 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zybo_z7_defconfig b/configs/zynq_zybo_z7_defconfig index 0cc525c637..bb193e4560 100644 --- a/configs/zynq_zybo_z7_defconfig +++ b/configs/zynq_zybo_z7_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +# CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/drivers/Kconfig b/drivers/Kconfig index 350acf81f3..9d99ce0226 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -118,6 +118,8 @@ source "drivers/tpm/Kconfig" source "drivers/usb/Kconfig" +source "drivers/ufs/Kconfig" + source "drivers/video/Kconfig" source "drivers/virtio/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index a4bb5e4975..0befeddfcb 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -111,6 +111,7 @@ obj-y += soc/ obj-y += thermal/ obj-$(CONFIG_TEE) += tee/ obj-y += axi/ +obj-y += ufs/ obj-$(CONFIG_W1) += w1/ obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c index df87645774..7e97b0c4bf 100644 --- a/drivers/clk/clk_versal.c +++ b/drivers/clk/clk_versal.c @@ -12,6 +12,7 @@ #include <clk.h> #include <dm.h> #include <asm/arch/sys_proto.h> +#include <zynqmp_firmware.h> #define MAX_PARENT 100 #define MAX_NODES 6 @@ -362,7 +363,7 @@ static u32 versal_clock_get_div(u32 clk_id) u32 ret_payload[PAYLOAD_ARG_CNT]; u32 div; - versal_pm_request(PM_CLOCK_GETDIVIDER, clk_id, 0, 0, 0, ret_payload); + xilinx_pm_request(PM_CLOCK_GETDIVIDER, clk_id, 0, 0, 0, ret_payload); div = ret_payload[1]; return div; @@ -372,7 +373,7 @@ static u32 versal_clock_set_div(u32 clk_id, u32 div) { u32 ret_payload[PAYLOAD_ARG_CNT]; - versal_pm_request(PM_CLOCK_SETDIVIDER, clk_id, div, 0, 0, ret_payload); + xilinx_pm_request(PM_CLOCK_SETDIVIDER, clk_id, div, 0, 0, ret_payload); return div; } @@ -382,7 +383,7 @@ static u64 versal_clock_ref(u32 clk_id) u32 ret_payload[PAYLOAD_ARG_CNT]; int ref; - versal_pm_request(PM_CLOCK_GETPARENT, clk_id, 0, 0, 0, ret_payload); + xilinx_pm_request(PM_CLOCK_GETPARENT, clk_id, 0, 0, 0, ret_payload); ref = ret_payload[0]; if (!(ref & 1)) return ref_clk; @@ -401,7 +402,7 @@ static u64 versal_clock_get_pll_rate(u32 clk_id) u32 parent_rate, parent_id; u32 id = clk_id & 0xFFF; - versal_pm_request(PM_CLOCK_GETSTATE, clk_id, 0, 0, 0, ret_payload); + xilinx_pm_request(PM_CLOCK_GETSTATE, clk_id, 0, 0, 0, ret_payload); res = ret_payload[1]; if (!res) { printf("0%x PLL not enabled\n", clk_id); @@ -411,9 +412,9 @@ static u64 versal_clock_get_pll_rate(u32 clk_id) parent_id = clock[clock[id].parent[0].id].clk_id; parent_rate = versal_clock_ref(parent_id); - versal_pm_request(PM_CLOCK_GETDIVIDER, clk_id, 0, 0, 0, ret_payload); + xilinx_pm_request(PM_CLOCK_GETDIVIDER, clk_id, 0, 0, 0, ret_payload); fbdiv = ret_payload[1]; - versal_pm_request(PM_CLOCK_PLL_GETPARAM, clk_id, 2, 0, 0, ret_payload); + xilinx_pm_request(PM_CLOCK_PLL_GETPARAM, clk_id, 2, 0, 0, ret_payload); frac = ret_payload[1]; freq = (fbdiv * parent_rate) >> (1 << frac); @@ -440,7 +441,7 @@ static u32 versal_clock_get_parentid(u32 clk_id) u32 id = clk_id & 0xFFF; if (versal_clock_mux(clk_id)) { - versal_pm_request(PM_CLOCK_GETPARENT, clk_id, 0, 0, 0, + xilinx_pm_request(PM_CLOCK_GETPARENT, clk_id, 0, 0, 0, ret_payload); parent_id = ret_payload[1]; } diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c index 167f3f75a1..72fc39fa47 100644 --- a/drivers/clk/clk_zynqmp.c +++ b/drivers/clk/clk_zynqmp.c @@ -702,7 +702,6 @@ static struct clk_ops zynqmp_clk_ops = { static const struct udevice_id zynqmp_clk_ids[] = { { .compatible = "xlnx,zynqmp-clk" }, - { .compatible = "xlnx,zynqmp-clkc" }, { } }; diff --git a/drivers/crypto/rsa_mod_exp/mod_exp_uclass.c b/drivers/crypto/rsa_mod_exp/mod_exp_uclass.c index 93deaa7f51..e91fe64458 100644 --- a/drivers/crypto/rsa_mod_exp/mod_exp_uclass.c +++ b/drivers/crypto/rsa_mod_exp/mod_exp_uclass.c @@ -13,10 +13,23 @@ #include <asm/io.h> #include <linux/list.h> +#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC) +DECLARE_GLOBAL_DATA_PTR; +#endif + int rsa_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t sig_len, struct key_prop *node, uint8_t *out) { - const struct mod_exp_ops *ops = device_get_ops(dev); + struct mod_exp_ops *ops = (struct mod_exp_ops *)device_get_ops(dev); + +#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC) + static bool done; + + if (!done) { + done = true; + ops->mod_exp += gd->reloc_off; + } +#endif if (!ops->mod_exp) return -ENOSYS; diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c index 15e82ac3b3..dea58b5581 100644 --- a/drivers/firmware/firmware-zynqmp.c +++ b/drivers/firmware/firmware-zynqmp.c @@ -7,10 +7,10 @@ #include <common.h> #include <dm.h> +#include <zynqmp_firmware.h> #if defined(CONFIG_ZYNQMP_IPI) #include <mailbox.h> -#include <zynqmp_firmware.h> #include <asm/arch/sys_proto.h> #define PMUFW_PAYLOAD_ARG_CNT 8 @@ -54,7 +54,7 @@ static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen) if (IS_ENABLED(CONFIG_SPL_BUILD)) return ipi_req(req, req_len, res, res_maxlen); - return invoke_smc(req[0] + PM_SIP_SVC, 0, 0, 0, 0, res); + return xilinx_pm_request(req[0], 0, 0, 0, 0, res); } unsigned int zynqmp_firmware_version(void) @@ -110,19 +110,19 @@ void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) static int zynqmp_power_probe(struct udevice *dev) { - int ret = 0; + int ret; debug("%s, (dev=%p)\n", __func__, dev); ret = mbox_get_by_name(dev, "tx", &zynqmp_power.tx_chan); if (ret) { - debug("%s, cannot tx mailbox\n", __func__); + debug("%s: Cannot find tx mailbox\n", __func__); return ret; } ret = mbox_get_by_name(dev, "rx", &zynqmp_power.rx_chan); if (ret) { - debug("%s, cannot rx mailbox\n", __func__); + debug("%s: Cannot find rx mailbox\n", __func__); return ret; } @@ -147,6 +147,37 @@ U_BOOT_DRIVER(zynqmp_power) = { }; #endif +int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, + u32 arg3, u32 *ret_payload) +{ + /* + * Added SIP service call Function Identifier + * Make sure to stay in x0 register + */ + struct pt_regs regs; + + if (current_el() == 3) { + printf("%s: Can't call SMC from EL3 context\n", __func__); + return -EPERM; + } + + regs.regs[0] = PM_SIP_SVC | api_id; + regs.regs[1] = ((u64)arg1 << 32) | arg0; + regs.regs[2] = ((u64)arg3 << 32) | arg2; + + smc_call(®s); + + if (ret_payload) { + ret_payload[0] = (u32)regs.regs[0]; + ret_payload[1] = upper_32_bits(regs.regs[0]); + ret_payload[2] = (u32)regs.regs[1]; + ret_payload[3] = upper_32_bits(regs.regs[1]); + ret_payload[4] = (u32)regs.regs[2]; + } + + return regs.regs[0]; +} + static const struct udevice_id zynqmp_firmware_ids[] = { { .compatible = "xlnx,zynqmp-firmware" }, { .compatible = "xlnx,versal-firmware"}, diff --git a/drivers/fpga/versalpl.c b/drivers/fpga/versalpl.c index 69617a9b1d..4bcc213243 100644 --- a/drivers/fpga/versalpl.c +++ b/drivers/fpga/versalpl.c @@ -8,6 +8,7 @@ #include <asm/arch/sys_proto.h> #include <memalign.h> #include <versalpl.h> +#include <zynqmp_firmware.h> static ulong versal_align_dma_buffer(ulong *buf, u32 len) { @@ -38,7 +39,7 @@ static int versal_load(xilinx_desc *desc, const void *buf, size_t bsize, buf_lo = lower_32_bits(bin_buf); buf_hi = upper_32_bits(bin_buf); - ret = versal_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo, + ret = xilinx_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo, buf_hi, 0, ret_payload); if (ret) puts("PL FPGA LOAD fail\n"); diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c index c2670271c8..d129b5459c 100644 --- a/drivers/fpga/zynqmppl.c +++ b/drivers/fpga/zynqmppl.c @@ -227,11 +227,12 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize, buf_hi = upper_32_bits(bin_buf); if (xilfpga_old) - ret = invoke_smc(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, buf_hi, - (u32)(uintptr_t)bsizeptr, bstype, ret_payload); + ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, + buf_hi, (u32)(uintptr_t)bsizeptr, + bstype, ret_payload); else - ret = invoke_smc(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, buf_hi, - (u32)bsize, 0, ret_payload); + ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, + buf_hi, (u32)bsize, 0, ret_payload); if (ret) puts("PL FPGA LOAD fail\n"); @@ -272,7 +273,8 @@ static int zynqmp_loads(xilinx_desc *desc, const void *buf, size_t bsize, buf_lo = lower_32_bits((ulong)buf); buf_hi = upper_32_bits((ulong)buf); - ret = invoke_smc(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, buf_hi, + ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo, + buf_hi, (u32)(uintptr_t)fpga_sec_info->userkey_addr, flag, ret_payload); if (ret) @@ -289,8 +291,8 @@ static int zynqmp_pcap_info(xilinx_desc *desc) int ret; u32 ret_payload[PAYLOAD_ARG_CNT]; - ret = invoke_smc(ZYNQMP_SIP_SVC_PM_FPGA_STATUS, 0, 0, 0, - 0, ret_payload); + ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_STATUS, 0, 0, 0, + 0, ret_payload); if (!ret) printf("PCAP status\t0x%x\n", ret_payload[1]); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 39f2c7e328..c1ad5d64a3 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -301,7 +301,7 @@ config MVEBU_GPIO config ZYNQ_GPIO bool "Zynq GPIO driver" - depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP) + depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL) default y help Supports GPIO access on Zynq SoC. diff --git a/drivers/gpio/zynq_gpio.c b/drivers/gpio/zynq_gpio.c index a760c5bdda..fe3b2c3b1a 100644 --- a/drivers/gpio/zynq_gpio.c +++ b/drivers/gpio/zynq_gpio.c @@ -93,6 +93,9 @@ /* GPIO upper 16 bit mask */ #define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 +#define PMC_GPIO_NR_GPIOS 116 +#define PMC_GPIO_MAX_BANK 5 + struct zynq_gpio_platdata { phys_addr_t base; const struct zynq_platform_data *p_data; @@ -114,6 +117,33 @@ struct zynq_platform_data { u32 bank_max[ZYNQMP_GPIO_MAX_BANK]; }; +#define VERSAL_GPIO_NR_GPIOS 58 +#define VERSAL_GPIO_MAX_BANK 4 + +static const struct zynq_platform_data versal_gpio_def = { + .label = "versal_gpio", + .ngpio = VERSAL_GPIO_NR_GPIOS, + .max_bank = VERSAL_GPIO_MAX_BANK, + .bank_min[0] = 0, + .bank_max[0] = 25, + .bank_min[3] = 26, + .bank_max[3] = 57, +}; + +static const struct zynq_platform_data pmc_gpio_def = { + .label = "pmc_gpio", + .ngpio = PMC_GPIO_NR_GPIOS, + .max_bank = PMC_GPIO_MAX_BANK, + .bank_min[0] = 0, + .bank_max[0] = 25, + .bank_min[1] = 26, + .bank_max[1] = 51, + .bank_min[3] = 52, + .bank_max[3] = 83, + .bank_min[4] = 84, + .bank_max[4] = 115, +}; + static const struct zynq_platform_data zynqmp_gpio_def = { .label = "zynqmp_gpio", .ngpio = ZYNQMP_GPIO_NR_GPIOS, @@ -329,6 +359,10 @@ static const struct udevice_id zynq_gpio_ids[] = { .data = (ulong)&zynq_gpio_def}, { .compatible = "xlnx,zynqmp-gpio-1.0", .data = (ulong)&zynqmp_gpio_def}, + { .compatible = "xlnx,versal-gpio-1.0", + .data = (ulong)&versal_gpio_def}, + { .compatible = "xlnx,pmc-gpio-1.0", + .data = (ulong)&pmc_gpio_def }, { } }; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 0050fb2b9b..37f379d478 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -94,6 +94,13 @@ config RENESAS_RPC_HF This enables access to Hyperflash memory through the Renesas RCar Gen3 RPC controller. +config HBMC_AM654 + bool "HyperBus controller driver for AM65x SoC" + depends on SYSCON + help + This is the driver for HyperBus controller on TI's AM65x and + other SoCs + source "drivers/mtd/nand/Kconfig" source "drivers/mtd/spi/Kconfig" diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 22ceda93c0..293079d709 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_FLASH_PIC32) += pic32_flash.o obj-$(CONFIG_ST_SMI) += st_smi.o obj-$(CONFIG_STM32_FLASH) += stm32_flash.o obj-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o +obj-$(CONFIG_HBMC_AM654) += hbmc-am654.o obj-y += nand/ diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index c59254c76e..0574fa63a4 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -178,7 +178,8 @@ __maybe_weak u64 flash_read64(void *addr) /*----------------------------------------------------------------------- */ #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || \ - (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) + (defined(CONFIG_SYS_MONITOR_BASE) && \ + (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)) static flash_info_t *flash_get_info(ulong base) { int i; @@ -2329,7 +2330,8 @@ static void flash_protect_default(void) #endif /* Monitor protection ON by default */ -#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ +#if defined(CONFIG_SYS_MONITOR_BASE) && \ + (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ (!defined(CONFIG_MONITOR_IS_IN_RAM)) flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, diff --git a/drivers/mtd/hbmc-am654.c b/drivers/mtd/hbmc-am654.c new file mode 100644 index 0000000000..5a560f1253 --- /dev/null +++ b/drivers/mtd/hbmc-am654.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +// Author: Vignesh Raghavendra <vigneshr@ti.com> + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <regmap.h> +#include <syscon.h> + +#define FSS_SYSC_REG 0x4 + +#define HYPERBUS_CALIB_COUNT 25 + +struct am654_hbmc_priv { + void __iomem *mmiobase; + bool calibrated; +}; + +/* Calibrate by looking for "QRY" string within the CFI space */ +static int am654_hyperbus_calibrate(struct udevice *dev) +{ + struct am654_hbmc_priv *priv = dev_get_priv(dev); + int count = HYPERBUS_CALIB_COUNT; + int pass_count = 0; + u16 qry[3]; + + if (priv->calibrated) + return 0; + + writew(0xF0, priv->mmiobase); + writew(0x98, priv->mmiobase + 0xaa); + + while (count--) { + qry[0] = readw(priv->mmiobase + 0x20); + qry[1] = readw(priv->mmiobase + 0x22); + qry[2] = readw(priv->mmiobase + 0x24); + + if (qry[0] == 'Q' && qry[1] == 'R' && qry[2] == 'Y') + pass_count++; + else + pass_count = 0; + if (pass_count == 5) + break; + } + writew(0xF0, priv->mmiobase); + writew(0xFF, priv->mmiobase); + + return pass_count == 5; +} + +static int am654_select_hbmc(struct udevice *dev) +{ + struct regmap *regmap = syscon_get_regmap(dev_get_parent(dev)); + + return regmap_update_bits(regmap, FSS_SYSC_REG, 0x2, 0x2); +} + +static int am654_hbmc_bind(struct udevice *dev) +{ + return dm_scan_fdt_dev(dev); +} + +static int am654_hbmc_probe(struct udevice *dev) +{ + struct am654_hbmc_priv *priv = dev_get_priv(dev); + int ret; + + priv->mmiobase = devfdt_remap_addr_index(dev, 1); + if (dev_read_bool(dev, "mux-controls")) { + ret = am654_select_hbmc(dev); + if (ret) { + dev_err(dev, "Failed to select HBMC mux\n"); + return ret; + } + } + + if (!priv->calibrated) { + ret = am654_hyperbus_calibrate(dev); + if (!ret) { + dev_err(dev, "Calibration Failed\n"); + return -EIO; + } + } + priv->calibrated = true; + + return 0; +} + +static const struct udevice_id am654_hbmc_dt_ids[] = { + { + .compatible = "ti,am654-hbmc", + }, + { /* end of table */ } +}; + +U_BOOT_DRIVER(hbmc_am654) = { + .name = "hbmc-am654", + .id = UCLASS_MTD, + .of_match = am654_hbmc_dt_ids, + .probe = am654_hbmc_probe, + .bind = am654_hbmc_bind, + .priv_auto_alloc_size = sizeof(struct am654_hbmc_priv), +}; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 48cb2a2818..69de6a53d5 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -45,7 +45,7 @@ static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; #endif /* almost the maximum amount of the scsi_ext command.. */ -#define SCSI_MAX_READ_BLK 0xFFFF +#define SCSI_MAX_BLK 0xFFFF #define SCSI_LBA48_READ 0xFFFFFFF static void scsi_print_error(struct scsi_cmd *pccb) @@ -83,6 +83,22 @@ void scsi_setup_read16(struct scsi_cmd *pccb, lbaint_t start, } #endif +static void scsi_setup_inquiry(struct scsi_cmd *pccb) +{ + pccb->cmd[0] = SCSI_INQUIRY; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = 0; + pccb->cmd[3] = 0; + if (pccb->datalen > 255) + pccb->cmd[4] = 255; + else + pccb->cmd[4] = (unsigned char)pccb->datalen; + pccb->cmd[5] = 0; + pccb->cmdlen = 6; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ +} + +#ifdef CONFIG_BLK static void scsi_setup_read_ext(struct scsi_cmd *pccb, lbaint_t start, unsigned short blocks) { @@ -126,36 +142,13 @@ static void scsi_setup_write_ext(struct scsi_cmd *pccb, lbaint_t start, pccb->cmd[7], pccb->cmd[8]); } -static void scsi_setup_inquiry(struct scsi_cmd *pccb) -{ - pccb->cmd[0] = SCSI_INQUIRY; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = 0; - pccb->cmd[3] = 0; - if (pccb->datalen > 255) - pccb->cmd[4] = 255; - else - pccb->cmd[4] = (unsigned char)pccb->datalen; - pccb->cmd[5] = 0; - pccb->cmdlen = 6; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ -} - -#ifdef CONFIG_BLK static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, void *buffer) -#else -static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, void *buffer) -#endif { -#ifdef CONFIG_BLK struct blk_desc *block_dev = dev_get_uclass_platdata(dev); struct udevice *bdev = dev->parent; -#else - struct udevice *bdev = NULL; -#endif - lbaint_t start, blks; + struct scsi_platdata *uc_plat = dev_get_uclass_platdata(bdev); + lbaint_t start, blks, max_blks; uintptr_t buf_addr; unsigned short smallblks = 0; struct scsi_cmd *pccb = (struct scsi_cmd *)&tempccb; @@ -166,28 +159,33 @@ static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, buf_addr = (unsigned long)buffer; start = blknr; blks = blkcnt; + if (uc_plat->max_bytes_per_req) + max_blks = uc_plat->max_bytes_per_req / block_dev->blksz; + else + max_blks = SCSI_MAX_BLK; + debug("\nscsi_read: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", block_dev->devnum, start, blks, (unsigned long)buffer); do { pccb->pdata = (unsigned char *)buf_addr; + pccb->dma_dir = DMA_FROM_DEVICE; #ifdef CONFIG_SYS_64BIT_LBA if (start > SCSI_LBA48_READ) { unsigned long blocks; - blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); + blocks = min_t(lbaint_t, blks, max_blks); pccb->datalen = block_dev->blksz * blocks; scsi_setup_read16(pccb, start, blocks); start += blocks; blks -= blocks; } else #endif - if (blks > SCSI_MAX_READ_BLK) { - pccb->datalen = block_dev->blksz * - SCSI_MAX_READ_BLK; - smallblks = SCSI_MAX_READ_BLK; + if (blks > max_blks) { + pccb->datalen = block_dev->blksz * max_blks; + smallblks = max_blks; scsi_setup_read_ext(pccb, start, smallblks); - start += SCSI_MAX_READ_BLK; - blks -= SCSI_MAX_READ_BLK; + start += max_blks; + blks -= max_blks; } else { pccb->datalen = block_dev->blksz * blks; smallblks = (unsigned short)blks; @@ -214,24 +212,13 @@ static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, * scsi_write */ -/* Almost the maximum amount of the scsi_ext command.. */ -#define SCSI_MAX_WRITE_BLK 0xFFFF - -#ifdef CONFIG_BLK static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, const void *buffer) -#else -static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, const void *buffer) -#endif { -#ifdef CONFIG_BLK struct blk_desc *block_dev = dev_get_uclass_platdata(dev); struct udevice *bdev = dev->parent; -#else - struct udevice *bdev = NULL; -#endif - lbaint_t start, blks; + struct scsi_platdata *uc_plat = dev_get_uclass_platdata(bdev); + lbaint_t start, blks, max_blks; uintptr_t buf_addr; unsigned short smallblks; struct scsi_cmd *pccb = (struct scsi_cmd *)&tempccb; @@ -242,17 +229,22 @@ static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, buf_addr = (unsigned long)buffer; start = blknr; blks = blkcnt; + if (uc_plat->max_bytes_per_req) + max_blks = uc_plat->max_bytes_per_req / block_dev->blksz; + else + max_blks = SCSI_MAX_BLK; + debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", __func__, block_dev->devnum, start, blks, (unsigned long)buffer); do { pccb->pdata = (unsigned char *)buf_addr; - if (blks > SCSI_MAX_WRITE_BLK) { - pccb->datalen = (block_dev->blksz * - SCSI_MAX_WRITE_BLK); - smallblks = SCSI_MAX_WRITE_BLK; + pccb->dma_dir = DMA_TO_DEVICE; + if (blks > max_blks) { + pccb->datalen = block_dev->blksz * max_blks; + smallblks = max_blks; scsi_setup_write_ext(pccb, start, smallblks); - start += SCSI_MAX_WRITE_BLK; - blks -= SCSI_MAX_WRITE_BLK; + start += max_blks; + blks -= max_blks; } else { pccb->datalen = block_dev->blksz * blks; smallblks = (unsigned short)blks; @@ -273,6 +265,7 @@ static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, __func__, start, smallblks, buf_addr); return blkcnt; } +#endif #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) && \ !defined(CONFIG_DM_SCSI) @@ -394,6 +387,7 @@ static int scsi_read_capacity(struct udevice *dev, struct scsi_cmd *pccb, pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ pccb->datalen = 16; + pccb->dma_dir = DMA_FROM_DEVICE; if (scsi_exec(dev, pccb)) return 1; @@ -450,10 +444,6 @@ static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc) dev_desc->product[0] = 0; dev_desc->revision[0] = 0; dev_desc->removable = false; -#if !CONFIG_IS_ENABLED(BLK) - dev_desc->block_read = scsi_read; - dev_desc->block_write = scsi_write; -#endif } #if !defined(CONFIG_DM_SCSI) @@ -494,11 +484,13 @@ static int scsi_detect_dev(struct udevice *dev, int target, int lun, lbaint_t capacity; unsigned long blksz; struct scsi_cmd *pccb = (struct scsi_cmd *)&tempccb; + int count, err; pccb->target = target; pccb->lun = lun; pccb->pdata = (unsigned char *)&tempbuff; pccb->datalen = 512; + pccb->dma_dir = DMA_FROM_DEVICE; scsi_setup_inquiry(pccb); if (scsi_exec(dev, pccb)) { if (pccb->contr_stat == SCSI_SEL_TIME_OUT) { @@ -529,9 +521,14 @@ static int scsi_detect_dev(struct udevice *dev, int target, int lun, dev_desc->target = pccb->target; dev_desc->lun = pccb->lun; - pccb->datalen = 0; - scsi_setup_test_unit_ready(pccb); - if (scsi_exec(dev, pccb)) { + for (count = 0; count < 3; count++) { + pccb->datalen = 0; + scsi_setup_test_unit_ready(pccb); + err = scsi_exec(dev, pccb); + if (!err) + break; + } + if (err) { if (dev_desc->removable) { dev_desc->type = perq; goto removable; diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c index 04ea42cbcc..c11f040200 100644 --- a/drivers/spi/zynqmp_gqspi.c +++ b/drivers/spi/zynqmp_gqspi.c @@ -6,8 +6,6 @@ */ #include <common.h> -#include <asm/arch/clk.h> -#include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> #include <clk.h> diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig new file mode 100644 index 0000000000..c2aafd3020 --- /dev/null +++ b/drivers/ufs/Kconfig @@ -0,0 +1,23 @@ +menu "UFS Host Controller Support" + +config UFS + bool "Support UFS controllers" + depends on DM_SCSI + help + This selects support for Universal Flash Subsystem (UFS). + Say Y here if you want UFS Support. + +config CADENCE_UFS + bool "Cadence platform driver for UFS" + depends on UFS + help + This selects the platform driver for the Cadence UFS host + controller present on present TI's J721e devices. + +config TI_J721E_UFS + bool "Glue Layer driver for UFS on TI J721E devices" + help + This selects the glue layer driver for Cadence controller + present on TI's J721E devices. + +endmenu diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile new file mode 100644 index 0000000000..62ed016608 --- /dev/null +++ b/drivers/ufs/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com +# + +obj-$(CONFIG_UFS) += ufs.o ufs-uclass.o +obj-$(CONFIG_CADENCE_UFS) += cdns-platform.o +obj-$(CONFIG_TI_J721E_UFS) += ti-j721e-ufs.o diff --git a/drivers/ufs/cdns-platform.c b/drivers/ufs/cdns-platform.c new file mode 100644 index 0000000000..c80f4253e4 --- /dev/null +++ b/drivers/ufs/cdns-platform.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0+ +/** + * cdns-platform.c - Platform driver for Cadence UFSHCI device + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + */ + +#include <clk.h> +#include <common.h> +#include <dm.h> +#include <ufs.h> + +#include "ufs.h" + +#define USEC_PER_SEC 1000000L + +#define CDNS_UFS_REG_HCLKDIV 0xFC +#define CDNS_UFS_REG_PHY_XCFGD1 0x113C + +static int cdns_ufs_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC; + switch (status) { + case PRE_CHANGE: + return ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), + 0); + case POST_CHANGE: + ; + } + + return 0; +} + +static int cdns_ufs_set_hclkdiv(struct ufs_hba *hba) +{ + struct clk clk; + unsigned long core_clk_rate = 0; + u32 core_clk_div = 0; + int ret; + + ret = clk_get_by_name(hba->dev, "core_clk", &clk); + if (ret) { + dev_err(hba->dev, "failed to get core_clk clock\n"); + return ret; + } + + core_clk_rate = clk_get_rate(&clk); + if (IS_ERR_VALUE(core_clk_rate)) { + dev_err(hba->dev, "%s: unable to find core_clk rate\n", + __func__); + return core_clk_rate; + } + + core_clk_div = core_clk_rate / USEC_PER_SEC; + ufshcd_writel(hba, core_clk_div, CDNS_UFS_REG_HCLKDIV); + + return 0; +} + +static int cdns_ufs_hce_enable_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + switch (status) { + case PRE_CHANGE: + return cdns_ufs_set_hclkdiv(hba); + case POST_CHANGE: + ; + } + + return 0; +} + +static int cdns_ufs_init(struct ufs_hba *hba) +{ + u32 data; + + /* Increase RX_Advanced_Min_ActivateTime_Capability */ + data = ufshcd_readl(hba, CDNS_UFS_REG_PHY_XCFGD1); + data |= BIT(24); + ufshcd_writel(hba, data, CDNS_UFS_REG_PHY_XCFGD1); + + return 0; +} + +static struct ufs_hba_ops cdns_pltfm_hba_ops = { + .init = cdns_ufs_init, + .hce_enable_notify = cdns_ufs_hce_enable_notify, + .link_startup_notify = cdns_ufs_link_startup_notify, +}; + +static int cdns_ufs_pltfm_probe(struct udevice *dev) +{ + int err = ufshcd_probe(dev, &cdns_pltfm_hba_ops); + if (err) + dev_err(dev, "ufshcd_probe() failed %d\n", err); + + return err; +} + +static int cdns_ufs_pltfm_bind(struct udevice *dev) +{ + struct udevice *scsi_dev; + + return ufs_scsi_bind(dev, &scsi_dev); +} + +static const struct udevice_id cdns_ufs_pltfm_ids[] = { + { + .compatible = "cdns,ufshc-m31-16nm", + }, + {}, +}; + +U_BOOT_DRIVER(cdns_ufs_pltfm) = { + .name = "cdns-ufs-pltfm", + .id = UCLASS_UFS, + .of_match = cdns_ufs_pltfm_ids, + .probe = cdns_ufs_pltfm_probe, + .bind = cdns_ufs_pltfm_bind, +}; diff --git a/drivers/ufs/ti-j721e-ufs.c b/drivers/ufs/ti-j721e-ufs.c new file mode 100644 index 0000000000..24ec3ebea1 --- /dev/null +++ b/drivers/ufs/ti-j721e-ufs.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <asm/io.h> +#include <clk.h> +#include <common.h> +#include <dm.h> + +#define UFS_SS_CTRL 0x4 +#define UFS_SS_RST_N_PCS BIT(0) +#define UFS_SS_CLK_26MHZ BIT(4) + +static int ti_j721e_ufs_probe(struct udevice *dev) +{ + void __iomem *base; + unsigned int clock; + struct clk clk; + u32 reg = 0; + int ret; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) { + dev_err(dev, "failed to get M-PHY clock\n"); + return ret; + } + + clock = clk_get_rate(&clk); + if (IS_ERR_VALUE(clock)) { + dev_err(dev, "failed to get rate\n"); + return ret; + } + + base = dev_remap_addr_index(dev, 0); + + if (clock == 26000000) + reg |= UFS_SS_CLK_26MHZ; + /* Take UFS slave device out of reset */ + reg |= UFS_SS_RST_N_PCS; + writel(reg, base + UFS_SS_CTRL); + + return 0; +} + +static int ti_j721e_ufs_remove(struct udevice *dev) +{ + void __iomem *base = dev_remap_addr_index(dev, 0); + u32 reg = readl(base + UFS_SS_CTRL); + + reg &= ~UFS_SS_RST_N_PCS; + writel(reg, base + UFS_SS_CTRL); + + return 0; +} + +static const struct udevice_id ti_j721e_ufs_ids[] = { + { + .compatible = "ti,j721e-ufs", + }, + {}, +}; + +U_BOOT_DRIVER(ti_j721e_ufs) = { + .name = "ti-j721e-ufs", + .id = UCLASS_MISC, + .of_match = ti_j721e_ufs_ids, + .probe = ti_j721e_ufs_probe, + .remove = ti_j721e_ufs_remove, + .flags = DM_FLAG_OS_PREPARE, +}; diff --git a/drivers/ufs/ufs-uclass.c b/drivers/ufs/ufs-uclass.c new file mode 100644 index 0000000000..920bfa64e1 --- /dev/null +++ b/drivers/ufs/ufs-uclass.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * ufs-uclass.c - Universal Flash Subsystem (UFS) Uclass driver + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + */ + +#include <common.h> +#include "ufs.h" +#include <dm.h> + +UCLASS_DRIVER(ufs) = { + .id = UCLASS_UFS, + .name = "ufs", + .per_device_auto_alloc_size = sizeof(struct ufs_hba), +}; diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c new file mode 100644 index 0000000000..23306863d5 --- /dev/null +++ b/drivers/ufs/ufs.c @@ -0,0 +1,1968 @@ +// SPDX-License-Identifier: GPL-2.0+ +/** + * ufs.c - Universal Flash Subsystem (UFS) driver + * + * Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported + * to u-boot. + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + */ + +#include <charset.h> +#include <common.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/device-internal.h> +#include <malloc.h> +#include <hexdump.h> +#include <scsi.h> + +#include <asm/dma-mapping.h> + +#include "ufs.h" + +#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ + UTP_TASK_REQ_COMPL |\ + UFSHCD_ERROR_MASK) +/* maximum number of link-startup retries */ +#define DME_LINKSTARTUP_RETRIES 3 + +/* maximum number of retries for a general UIC command */ +#define UFS_UIC_COMMAND_RETRIES 3 + +/* Query request retries */ +#define QUERY_REQ_RETRIES 3 +/* Query request timeout */ +#define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ + +/* maximum timeout in ms for a general UIC command */ +#define UFS_UIC_CMD_TIMEOUT 1000 +/* NOP OUT retries waiting for NOP IN response */ +#define NOP_OUT_RETRIES 10 +/* Timeout after 30 msecs if NOP OUT hangs without response */ +#define NOP_OUT_TIMEOUT 30 /* msecs */ + +/* Only use one Task Tag for all requests */ +#define TASK_TAG 0 + +/* Expose the flag value from utp_upiu_query.value */ +#define MASK_QUERY_UPIU_FLAG_LOC 0xFF + +#define MAX_PRDT_ENTRY 262144 + +/* maximum bytes per request */ +#define UFS_MAX_BYTES (128 * 256 * 1024) + +static inline bool ufshcd_is_hba_active(struct ufs_hba *hba); +static inline void ufshcd_hba_stop(struct ufs_hba *hba); +static int ufshcd_hba_enable(struct ufs_hba *hba); + +/* + * ufshcd_wait_for_register - wait for register value to change + */ +static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, + u32 val, unsigned long timeout_ms) +{ + int err = 0; + unsigned long start = get_timer(0); + + /* ignore bits that we don't intend to wait on */ + val = val & mask; + + while ((ufshcd_readl(hba, reg) & mask) != val) { + if (get_timer(start) > timeout_ms) { + if ((ufshcd_readl(hba, reg) & mask) != val) + err = -ETIMEDOUT; + break; + } + } + + return err; +} + +/** + * ufshcd_init_pwr_info - setting the POR (power on reset) + * values in hba power info + */ +static void ufshcd_init_pwr_info(struct ufs_hba *hba) +{ + hba->pwr_info.gear_rx = UFS_PWM_G1; + hba->pwr_info.gear_tx = UFS_PWM_G1; + hba->pwr_info.lane_rx = 1; + hba->pwr_info.lane_tx = 1; + hba->pwr_info.pwr_rx = SLOWAUTO_MODE; + hba->pwr_info.pwr_tx = SLOWAUTO_MODE; + hba->pwr_info.hs_rate = 0; +} + +/** + * ufshcd_print_pwr_info - print power params as saved in hba + * power info + */ +static void ufshcd_print_pwr_info(struct ufs_hba *hba) +{ + static const char * const names[] = { + "INVALID MODE", + "FAST MODE", + "SLOW_MODE", + "INVALID MODE", + "FASTAUTO_MODE", + "SLOWAUTO_MODE", + "INVALID MODE", + }; + + dev_err(hba->dev, "[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n", + hba->pwr_info.gear_rx, hba->pwr_info.gear_tx, + hba->pwr_info.lane_rx, hba->pwr_info.lane_tx, + names[hba->pwr_info.pwr_rx], + names[hba->pwr_info.pwr_tx], + hba->pwr_info.hs_rate); +} + +/** + * ufshcd_ready_for_uic_cmd - Check if controller is ready + * to accept UIC commands + */ +static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) +{ + if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY) + return true; + else + return false; +} + +/** + * ufshcd_get_uic_cmd_result - Get the UIC command result + */ +static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) & + MASK_UIC_COMMAND_RESULT; +} + +/** + * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command + */ +static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); +} + +/** + * ufshcd_is_device_present - Check if any device connected to + * the host controller + */ +static inline bool ufshcd_is_device_present(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & + DEVICE_PRESENT) ? true : false; +} + +/** + * ufshcd_send_uic_cmd - UFS Interconnect layer command API + * + */ +static int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + unsigned long start = 0; + u32 intr_status; + u32 enabled_intr_status; + + if (!ufshcd_ready_for_uic_cmd(hba)) { + dev_err(hba->dev, + "Controller not ready to accept UIC commands\n"); + return -EIO; + } + + debug("sending uic command:%d\n", uic_cmd->command); + + /* Write Args */ + ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1); + ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2); + ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3); + + /* Write UIC Cmd */ + ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK, + REG_UIC_COMMAND); + + start = get_timer(0); + do { + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + enabled_intr_status = intr_status & hba->intr_mask; + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + + if (get_timer(start) > UFS_UIC_CMD_TIMEOUT) { + dev_err(hba->dev, + "Timedout waiting for UIC response\n"); + + return -ETIMEDOUT; + } + + if (enabled_intr_status & UFSHCD_ERROR_MASK) { + dev_err(hba->dev, "Error in status:%08x\n", + enabled_intr_status); + + return -1; + } + } while (!(enabled_intr_status & UFSHCD_UIC_MASK)); + + uic_cmd->argument2 = ufshcd_get_uic_cmd_result(hba); + uic_cmd->argument3 = ufshcd_get_dme_attr_val(hba); + + debug("Sent successfully\n"); + + return 0; +} + +/** + * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET + * + */ +int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, u8 attr_set, + u32 mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-set", + "dme-peer-set" + }; + const char *set = action[!!peer]; + int ret; + int retries = UFS_UIC_COMMAND_RETRIES; + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET; + uic_cmd.argument1 = attr_sel; + uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set); + uic_cmd.argument3 = mib_val; + + do { + /* for peer attributes we retry upon failure */ + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_dbg(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n", + set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret); + } while (ret && peer && --retries); + + if (ret) + dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x failed %d retries\n", + set, UIC_GET_ATTR_ID(attr_sel), mib_val, + UFS_UIC_COMMAND_RETRIES - retries); + + return ret; +} + +/** + * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET + * + */ +int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-get", + "dme-peer-get" + }; + const char *get = action[!!peer]; + int ret; + int retries = UFS_UIC_COMMAND_RETRIES; + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET; + uic_cmd.argument1 = attr_sel; + + do { + /* for peer attributes we retry upon failure */ + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_dbg(hba->dev, "%s: attr-id 0x%x error code %d\n", + get, UIC_GET_ATTR_ID(attr_sel), ret); + } while (ret && peer && --retries); + + if (ret) + dev_err(hba->dev, "%s: attr-id 0x%x failed %d retries\n", + get, UIC_GET_ATTR_ID(attr_sel), + UFS_UIC_COMMAND_RETRIES - retries); + + if (mib_val && !ret) + *mib_val = uic_cmd.argument3; + + return ret; +} + +static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) +{ + u32 tx_lanes, i, err = 0; + + if (!peer) + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &tx_lanes); + else + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &tx_lanes); + for (i = 0; i < tx_lanes; i++) { + if (!peer) + err = ufshcd_dme_set(hba, + UIC_ARG_MIB_SEL(TX_LCC_ENABLE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), + 0); + else + err = ufshcd_dme_peer_set(hba, + UIC_ARG_MIB_SEL(TX_LCC_ENABLE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), + 0); + if (err) { + dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d", + __func__, peer, i, err); + break; + } + } + + return err; +} + +static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba) +{ + return ufshcd_disable_tx_lcc(hba, true); +} + +/** + * ufshcd_dme_link_startup - Notify Unipro to perform link startup + * + */ +static int ufshcd_dme_link_startup(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_LINK_STARTUP; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_dbg(hba->dev, + "dme-link-startup: error code %d\n", ret); + return ret; +} + +/** + * ufshcd_disable_intr_aggr - Disables interrupt aggregation. + * + */ +static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba) +{ + ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY + */ +static inline int ufshcd_get_lists_status(u32 reg) +{ + return !((reg & UFSHCD_STATUS_READY) == UFSHCD_STATUS_READY); +} + +/** + * ufshcd_enable_run_stop_reg - Enable run-stop registers, + * When run-stop registers are set to 1, it indicates the + * host controller that it can process the requests + */ +static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) +{ + ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TASK_REQ_LIST_RUN_STOP); + ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP); +} + +/** + * ufshcd_enable_intr - enable interrupts + */ +static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs) +{ + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + u32 rw; + + if (hba->version == UFSHCI_VERSION_10) { + rw = set & INTERRUPT_MASK_RW_VER_10; + set = rw | ((set ^ intrs) & intrs); + } else { + set |= intrs; + } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); + + hba->intr_mask = set; +} + +/** + * ufshcd_make_hba_operational - Make UFS controller operational + * + * To bring UFS host controller to operational state, + * 1. Enable required interrupts + * 2. Configure interrupt aggregation + * 3. Program UTRL and UTMRL base address + * 4. Configure run-stop-registers + * + */ +static int ufshcd_make_hba_operational(struct ufs_hba *hba) +{ + int err = 0; + u32 reg; + + /* Enable required interrupts */ + ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); + + /* Disable interrupt aggregation */ + ufshcd_disable_intr_aggr(hba); + + /* Configure UTRL and UTMRL base address registers */ + ufshcd_writel(hba, lower_32_bits((dma_addr_t)hba->utrdl), + REG_UTP_TRANSFER_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits((dma_addr_t)hba->utrdl), + REG_UTP_TRANSFER_REQ_LIST_BASE_H); + ufshcd_writel(hba, lower_32_bits((dma_addr_t)hba->utmrdl), + REG_UTP_TASK_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits((dma_addr_t)hba->utmrdl), + REG_UTP_TASK_REQ_LIST_BASE_H); + + /* + * UCRDY, UTMRLDY and UTRLRDY bits must be 1 + */ + reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS); + if (!(ufshcd_get_lists_status(reg))) { + ufshcd_enable_run_stop_reg(hba); + } else { + dev_err(hba->dev, + "Host controller not ready to process requests"); + err = -EIO; + goto out; + } + +out: + return err; +} + +/** + * ufshcd_link_startup - Initialize unipro link startup + */ +static int ufshcd_link_startup(struct ufs_hba *hba) +{ + int ret; + int retries = DME_LINKSTARTUP_RETRIES; + bool link_startup_again = true; + +link_startup: + do { + ufshcd_ops_link_startup_notify(hba, PRE_CHANGE); + + ret = ufshcd_dme_link_startup(hba); + + /* check if device is detected by inter-connect layer */ + if (!ret && !ufshcd_is_device_present(hba)) { + dev_err(hba->dev, "%s: Device not present\n", __func__); + ret = -ENXIO; + goto out; + } + + /* + * DME link lost indication is only received when link is up, + * but we can't be sure if the link is up until link startup + * succeeds. So reset the local Uni-Pro and try again. + */ + if (ret && ufshcd_hba_enable(hba)) + goto out; + } while (ret && retries--); + + if (ret) + /* failed to get the link up... retire */ + goto out; + + if (link_startup_again) { + link_startup_again = false; + retries = DME_LINKSTARTUP_RETRIES; + goto link_startup; + } + + /* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */ + ufshcd_init_pwr_info(hba); + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) { + ret = ufshcd_disable_device_tx_lcc(hba); + if (ret) + goto out; + } + + /* Include any host controller configuration via UIC commands */ + ret = ufshcd_ops_link_startup_notify(hba, POST_CHANGE); + if (ret) + goto out; + + ret = ufshcd_make_hba_operational(hba); +out: + if (ret) + dev_err(hba->dev, "link startup failed %d\n", ret); + + return ret; +} + +/** + * ufshcd_hba_stop - Send controller to reset state + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba) +{ + int err; + + ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); + err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE, + CONTROLLER_ENABLE, CONTROLLER_DISABLE, + 10); + if (err) + dev_err(hba->dev, "%s: Controller disable failed\n", __func__); +} + +/** + * ufshcd_is_hba_active - Get controller state + */ +static inline bool ufshcd_is_hba_active(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & CONTROLLER_ENABLE) + ? false : true; +} + +/** + * ufshcd_hba_start - Start controller initialization sequence + */ +static inline void ufshcd_hba_start(struct ufs_hba *hba) +{ + ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE); +} + +/** + * ufshcd_hba_enable - initialize the controller + */ +static int ufshcd_hba_enable(struct ufs_hba *hba) +{ + int retry; + + if (!ufshcd_is_hba_active(hba)) + /* change controller state to "reset state" */ + ufshcd_hba_stop(hba); + + ufshcd_ops_hce_enable_notify(hba, PRE_CHANGE); + + /* start controller initialization sequence */ + ufshcd_hba_start(hba); + + /* + * To initialize a UFS host controller HCE bit must be set to 1. + * During initialization the HCE bit value changes from 1->0->1. + * When the host controller completes initialization sequence + * it sets the value of HCE bit to 1. The same HCE bit is read back + * to check if the controller has completed initialization sequence. + * So without this delay the value HCE = 1, set in the previous + * instruction might be read back. + * This delay can be changed based on the controller. + */ + mdelay(1); + + /* wait for the host controller to complete initialization */ + retry = 10; + while (ufshcd_is_hba_active(hba)) { + if (retry) { + retry--; + } else { + dev_err(hba->dev, "Controller enable failed\n"); + return -EIO; + } + mdelay(5); + } + + /* enable UIC related interrupts */ + ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); + + ufshcd_ops_hce_enable_notify(hba, POST_CHANGE); + + return 0; +} + +/** + * ufshcd_host_memory_configure - configure local reference block with + * memory offsets + */ +static void ufshcd_host_memory_configure(struct ufs_hba *hba) +{ + struct utp_transfer_req_desc *utrdlp; + dma_addr_t cmd_desc_dma_addr; + u16 response_offset; + u16 prdt_offset; + + utrdlp = hba->utrdl; + cmd_desc_dma_addr = (dma_addr_t)hba->ucdl; + + utrdlp->command_desc_base_addr_lo = + cpu_to_le32(lower_32_bits(cmd_desc_dma_addr)); + utrdlp->command_desc_base_addr_hi = + cpu_to_le32(upper_32_bits(cmd_desc_dma_addr)); + + response_offset = offsetof(struct utp_transfer_cmd_desc, response_upiu); + prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table); + + utrdlp->response_upiu_offset = cpu_to_le16(response_offset >> 2); + utrdlp->prd_table_offset = cpu_to_le16(prdt_offset >> 2); + utrdlp->response_upiu_length = cpu_to_le16(ALIGNED_UPIU_SIZE >> 2); + + hba->ucd_req_ptr = (struct utp_upiu_req *)hba->ucdl; + hba->ucd_rsp_ptr = + (struct utp_upiu_rsp *)&hba->ucdl->response_upiu; + hba->ucd_prdt_ptr = + (struct ufshcd_sg_entry *)&hba->ucdl->prd_table; +} + +/** + * ufshcd_memory_alloc - allocate memory for host memory space data structures + */ +static int ufshcd_memory_alloc(struct ufs_hba *hba) +{ + /* Allocate one Transfer Request Descriptor + * Should be aligned to 1k boundary. + */ + hba->utrdl = memalign(1024, sizeof(struct utp_transfer_req_desc)); + if (!hba->utrdl) { + dev_err(hba->dev, "Transfer Descriptor memory allocation failed\n"); + return -ENOMEM; + } + + /* Allocate one Command Descriptor + * Should be aligned to 1k boundary. + */ + hba->ucdl = memalign(1024, sizeof(struct utp_transfer_cmd_desc)); + if (!hba->ucdl) { + dev_err(hba->dev, "Command descriptor memory allocation failed\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * ufshcd_get_intr_mask - Get the interrupt bit mask + */ +static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba) +{ + u32 intr_mask = 0; + + switch (hba->version) { + case UFSHCI_VERSION_10: + intr_mask = INTERRUPT_MASK_ALL_VER_10; + break; + case UFSHCI_VERSION_11: + case UFSHCI_VERSION_20: + intr_mask = INTERRUPT_MASK_ALL_VER_11; + break; + case UFSHCI_VERSION_21: + default: + intr_mask = INTERRUPT_MASK_ALL_VER_21; + break; + } + + return intr_mask; +} + +/** + * ufshcd_get_ufs_version - Get the UFS version supported by the HBA + */ +static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UFS_VERSION); +} + +/** + * ufshcd_get_upmcrs - Get the power mode change request status + */ +static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7; +} + +/** + * ufshcd_prepare_req_desc_hdr() - Fills the requests header + * descriptor according to request + */ +static void ufshcd_prepare_req_desc_hdr(struct utp_transfer_req_desc *req_desc, + u32 *upiu_flags, + enum dma_data_direction cmd_dir) +{ + u32 data_direction; + u32 dword_0; + + if (cmd_dir == DMA_FROM_DEVICE) { + data_direction = UTP_DEVICE_TO_HOST; + *upiu_flags = UPIU_CMD_FLAGS_READ; + } else if (cmd_dir == DMA_TO_DEVICE) { + data_direction = UTP_HOST_TO_DEVICE; + *upiu_flags = UPIU_CMD_FLAGS_WRITE; + } else { + data_direction = UTP_NO_DATA_TRANSFER; + *upiu_flags = UPIU_CMD_FLAGS_NONE; + } + + dword_0 = data_direction | (0x1 << UPIU_COMMAND_TYPE_OFFSET); + + /* Enable Interrupt for command */ + dword_0 |= UTP_REQ_DESC_INT_CMD; + + /* Transfer request descriptor header fields */ + req_desc->header.dword_0 = cpu_to_le32(dword_0); + /* dword_1 is reserved, hence it is set to 0 */ + req_desc->header.dword_1 = 0; + /* + * assigning invalid value for command status. Controller + * updates OCS on command completion, with the command + * status + */ + req_desc->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + /* dword_3 is reserved, hence it is set to 0 */ + req_desc->header.dword_3 = 0; + + req_desc->prd_table_length = 0; +} + +static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba, + u32 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr; + struct ufs_query *query = &hba->dev_cmd.query; + u16 len = be16_to_cpu(query->request.upiu_req.length); + + /* Query request header */ + ucd_req_ptr->header.dword_0 = + UPIU_HEADER_DWORD(UPIU_TRANSACTION_QUERY_REQ, + upiu_flags, 0, TASK_TAG); + ucd_req_ptr->header.dword_1 = + UPIU_HEADER_DWORD(0, query->request.query_func, + 0, 0); + + /* Data segment length only need for WRITE_DESC */ + if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) + ucd_req_ptr->header.dword_2 = + UPIU_HEADER_DWORD(0, 0, (len >> 8), (u8)len); + else + ucd_req_ptr->header.dword_2 = 0; + + /* Copy the Query Request buffer as is */ + memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, QUERY_OSF_SIZE); + + /* Copy the Descriptor */ + if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) + memcpy(ucd_req_ptr + 1, query->descriptor, len); + + memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); +} + +static inline void ufshcd_prepare_utp_nop_upiu(struct ufs_hba *hba) +{ + struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr; + + memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req)); + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = + UPIU_HEADER_DWORD(UPIU_TRANSACTION_NOP_OUT, 0, 0, 0x1f); + /* clear rest of the fields of basic header */ + ucd_req_ptr->header.dword_1 = 0; + ucd_req_ptr->header.dword_2 = 0; + + memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); +} + +/** + * ufshcd_comp_devman_upiu - UFS Protocol Information Unit(UPIU) + * for Device Management Purposes + */ +static int ufshcd_comp_devman_upiu(struct ufs_hba *hba, + enum dev_cmd_type cmd_type) +{ + u32 upiu_flags; + int ret = 0; + struct utp_transfer_req_desc *req_desc = hba->utrdl; + + hba->dev_cmd.type = cmd_type; + + ufshcd_prepare_req_desc_hdr(req_desc, &upiu_flags, DMA_NONE); + switch (cmd_type) { + case DEV_CMD_TYPE_QUERY: + ufshcd_prepare_utp_query_req_upiu(hba, upiu_flags); + break; + case DEV_CMD_TYPE_NOP: + ufshcd_prepare_utp_nop_upiu(hba); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) +{ + unsigned long start; + u32 intr_status; + u32 enabled_intr_status; + + ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL); + + start = get_timer(0); + do { + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + enabled_intr_status = intr_status & hba->intr_mask; + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + + if (get_timer(start) > QUERY_REQ_TIMEOUT) { + dev_err(hba->dev, + "Timedout waiting for UTP response\n"); + + return -ETIMEDOUT; + } + + if (enabled_intr_status & UFSHCD_ERROR_MASK) { + dev_err(hba->dev, "Error in status:%08x\n", + enabled_intr_status); + + return -1; + } + } while (!(enabled_intr_status & UTP_TRANSFER_REQ_COMPL)); + + return 0; +} + +/** + * ufshcd_get_req_rsp - returns the TR response transaction type + */ +static inline int ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24; +} + +/** + * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status + * + */ +static inline int ufshcd_get_tr_ocs(struct ufs_hba *hba) +{ + return le32_to_cpu(hba->utrdl->header.dword_2) & MASK_OCS; +} + +static inline int ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; +} + +static int ufshcd_check_query_response(struct ufs_hba *hba) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + /* Get the UPIU response */ + query_res->response = ufshcd_get_rsp_upiu_result(hba->ucd_rsp_ptr) >> + UPIU_RSP_CODE_OFFSET; + return query_res->response; +} + +/** + * ufshcd_copy_query_response() - Copy the Query Response and the data + * descriptor + */ +static int ufshcd_copy_query_response(struct ufs_hba *hba) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + memcpy(&query_res->upiu_res, &hba->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); + + /* Get the descriptor */ + if (hba->dev_cmd.query.descriptor && + hba->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { + u8 *descp = (u8 *)hba->ucd_rsp_ptr + + GENERAL_UPIU_REQUEST_SIZE; + u16 resp_len; + u16 buf_len; + + /* data segment length */ + resp_len = be32_to_cpu(hba->ucd_rsp_ptr->header.dword_2) & + MASK_QUERY_DATA_SEG_LEN; + buf_len = + be16_to_cpu(hba->dev_cmd.query.request.upiu_req.length); + if (likely(buf_len >= resp_len)) { + memcpy(hba->dev_cmd.query.descriptor, descp, resp_len); + } else { + dev_warn(hba->dev, + "%s: Response size is bigger than buffer", + __func__); + return -EINVAL; + } + } + + return 0; +} + +/** + * ufshcd_exec_dev_cmd - API for sending device management requests + */ +static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, enum dev_cmd_type cmd_type, + int timeout) +{ + int err; + int resp; + + err = ufshcd_comp_devman_upiu(hba, cmd_type); + if (err) + return err; + + err = ufshcd_send_command(hba, TASK_TAG); + if (err) + return err; + + err = ufshcd_get_tr_ocs(hba); + if (err) { + dev_err(hba->dev, "Error in OCS:%d\n", err); + return -EINVAL; + } + + resp = ufshcd_get_req_rsp(hba->ucd_rsp_ptr); + switch (resp) { + case UPIU_TRANSACTION_NOP_IN: + break; + case UPIU_TRANSACTION_QUERY_RSP: + err = ufshcd_check_query_response(hba); + if (!err) + err = ufshcd_copy_query_response(hba); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + err = -EPERM; + dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n", + __func__); + break; + default: + err = -EINVAL; + dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n", + __func__, resp); + } + + return err; +} + +/** + * ufshcd_init_query() - init the query response and request parameters + */ +static inline void ufshcd_init_query(struct ufs_hba *hba, + struct ufs_query_req **request, + struct ufs_query_res **response, + enum query_opcode opcode, + u8 idn, u8 index, u8 selector) +{ + *request = &hba->dev_cmd.query.request; + *response = &hba->dev_cmd.query.response; + memset(*request, 0, sizeof(struct ufs_query_req)); + memset(*response, 0, sizeof(struct ufs_query_res)); + (*request)->upiu_req.opcode = opcode; + (*request)->upiu_req.idn = idn; + (*request)->upiu_req.index = index; + (*request)->upiu_req.selector = selector; +} + +/** + * ufshcd_query_flag() - API function for sending flag query requests + */ +int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, + enum flag_idn idn, bool *flag_res) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err, index = 0, selector = 0; + int timeout = QUERY_REQ_TIMEOUT; + + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + + switch (opcode) { + case UPIU_QUERY_OPCODE_SET_FLAG: + case UPIU_QUERY_OPCODE_CLEAR_FLAG: + case UPIU_QUERY_OPCODE_TOGGLE_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + if (!flag_res) { + /* No dummy reads */ + dev_err(hba->dev, "%s: Invalid argument for read request\n", + __func__); + err = -EINVAL; + goto out; + } + break; + default: + dev_err(hba->dev, + "%s: Expected query flag opcode but got = %d\n", + __func__, opcode); + err = -EINVAL; + goto out; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout); + + if (err) { + dev_err(hba->dev, + "%s: Sending flag query for idn %d failed, err = %d\n", + __func__, idn, err); + goto out; + } + + if (flag_res) + *flag_res = (be32_to_cpu(response->upiu_res.value) & + MASK_QUERY_UPIU_FLAG_LOC) & 0x1; + +out: + return err; +} + +static int ufshcd_query_flag_retry(struct ufs_hba *hba, + enum query_opcode opcode, + enum flag_idn idn, bool *flag_res) +{ + int ret; + int retries; + + for (retries = 0; retries < QUERY_REQ_RETRIES; retries++) { + ret = ufshcd_query_flag(hba, opcode, idn, flag_res); + if (ret) + dev_dbg(hba->dev, + "%s: failed with error %d, retries %d\n", + __func__, ret, retries); + else + break; + } + + if (ret) + dev_err(hba->dev, + "%s: query attribute, opcode %d, idn %d, failed with error %d after %d retires\n", + __func__, opcode, idn, ret, retries); + return ret; +} + +static int __ufshcd_query_descriptor(struct ufs_hba *hba, + enum query_opcode opcode, + enum desc_idn idn, u8 index, u8 selector, + u8 *desc_buf, int *buf_len) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err; + + if (!desc_buf) { + dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n", + __func__, opcode); + err = -EINVAL; + goto out; + } + + if (*buf_len < QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) { + dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n", + __func__, *buf_len); + err = -EINVAL; + goto out; + } + + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + hba->dev_cmd.query.descriptor = desc_buf; + request->upiu_req.length = cpu_to_be16(*buf_len); + + switch (opcode) { + case UPIU_QUERY_OPCODE_WRITE_DESC: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_DESC: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + break; + default: + dev_err(hba->dev, "%s: Expected query descriptor opcode but got = 0x%.2x\n", + __func__, opcode); + err = -EINVAL; + goto out; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n", + __func__, opcode, idn, index, err); + goto out; + } + + hba->dev_cmd.query.descriptor = NULL; + *buf_len = be16_to_cpu(response->upiu_res.length); + +out: + return err; +} + +/** + * ufshcd_query_descriptor_retry - API function for sending descriptor requests + */ +int ufshcd_query_descriptor_retry(struct ufs_hba *hba, enum query_opcode opcode, + enum desc_idn idn, u8 index, u8 selector, + u8 *desc_buf, int *buf_len) +{ + int err; + int retries; + + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + err = __ufshcd_query_descriptor(hba, opcode, idn, index, + selector, desc_buf, buf_len); + if (!err || err == -EINVAL) + break; + } + + return err; +} + +/** + * ufshcd_read_desc_length - read the specified descriptor length from header + */ +static int ufshcd_read_desc_length(struct ufs_hba *hba, enum desc_idn desc_id, + int desc_index, int *desc_length) +{ + int ret; + u8 header[QUERY_DESC_HDR_SIZE]; + int header_len = QUERY_DESC_HDR_SIZE; + + if (desc_id >= QUERY_DESC_IDN_MAX) + return -EINVAL; + + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, + desc_id, desc_index, 0, header, + &header_len); + + if (ret) { + dev_err(hba->dev, "%s: Failed to get descriptor header id %d", + __func__, desc_id); + return ret; + } else if (desc_id != header[QUERY_DESC_DESC_TYPE_OFFSET]) { + dev_warn(hba->dev, "%s: descriptor header id %d and desc_id %d mismatch", + __func__, header[QUERY_DESC_DESC_TYPE_OFFSET], + desc_id); + ret = -EINVAL; + } + + *desc_length = header[QUERY_DESC_LENGTH_OFFSET]; + + return ret; +} + +static void ufshcd_init_desc_sizes(struct ufs_hba *hba) +{ + int err; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_DEVICE, 0, + &hba->desc_size.dev_desc); + if (err) + hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_POWER, 0, + &hba->desc_size.pwr_desc); + if (err) + hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_INTERCONNECT, 0, + &hba->desc_size.interc_desc); + if (err) + hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_CONFIGURATION, 0, + &hba->desc_size.conf_desc); + if (err) + hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_UNIT, 0, + &hba->desc_size.unit_desc); + if (err) + hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_GEOMETRY, 0, + &hba->desc_size.geom_desc); + if (err) + hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE; + + err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_HEALTH, 0, + &hba->desc_size.hlth_desc); + if (err) + hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE; +} + +/** + * ufshcd_map_desc_id_to_length - map descriptor IDN to its length + * + */ +int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id, + int *desc_len) +{ + switch (desc_id) { + case QUERY_DESC_IDN_DEVICE: + *desc_len = hba->desc_size.dev_desc; + break; + case QUERY_DESC_IDN_POWER: + *desc_len = hba->desc_size.pwr_desc; + break; + case QUERY_DESC_IDN_GEOMETRY: + *desc_len = hba->desc_size.geom_desc; + break; + case QUERY_DESC_IDN_CONFIGURATION: + *desc_len = hba->desc_size.conf_desc; + break; + case QUERY_DESC_IDN_UNIT: + *desc_len = hba->desc_size.unit_desc; + break; + case QUERY_DESC_IDN_INTERCONNECT: + *desc_len = hba->desc_size.interc_desc; + break; + case QUERY_DESC_IDN_STRING: + *desc_len = QUERY_DESC_MAX_SIZE; + break; + case QUERY_DESC_IDN_HEALTH: + *desc_len = hba->desc_size.hlth_desc; + break; + case QUERY_DESC_IDN_RFU_0: + case QUERY_DESC_IDN_RFU_1: + *desc_len = 0; + break; + default: + *desc_len = 0; + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL(ufshcd_map_desc_id_to_length); + +/** + * ufshcd_read_desc_param - read the specified descriptor parameter + * + */ +int ufshcd_read_desc_param(struct ufs_hba *hba, enum desc_idn desc_id, + int desc_index, u8 param_offset, u8 *param_read_buf, + u8 param_size) +{ + int ret; + u8 *desc_buf; + int buff_len; + bool is_kmalloc = true; + + /* Safety check */ + if (desc_id >= QUERY_DESC_IDN_MAX || !param_size) + return -EINVAL; + + /* Get the max length of descriptor from structure filled up at probe + * time. + */ + ret = ufshcd_map_desc_id_to_length(hba, desc_id, &buff_len); + + /* Sanity checks */ + if (ret || !buff_len) { + dev_err(hba->dev, "%s: Failed to get full descriptor length", + __func__); + return ret; + } + + /* Check whether we need temp memory */ + if (param_offset != 0 || param_size < buff_len) { + desc_buf = kmalloc(buff_len, GFP_KERNEL); + if (!desc_buf) + return -ENOMEM; + } else { + desc_buf = param_read_buf; + is_kmalloc = false; + } + + /* Request for full descriptor */ + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, + desc_id, desc_index, 0, desc_buf, + &buff_len); + + if (ret) { + dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d", + __func__, desc_id, desc_index, param_offset, ret); + goto out; + } + + /* Sanity check */ + if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) { + dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header", + __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]); + ret = -EINVAL; + goto out; + } + + /* Check wherher we will not copy more data, than available */ + if (is_kmalloc && param_size > buff_len) + param_size = buff_len; + + if (is_kmalloc) + memcpy(param_read_buf, &desc_buf[param_offset], param_size); +out: + if (is_kmalloc) + kfree(desc_buf); + return ret; +} + +/* replace non-printable or non-ASCII characters with spaces */ +static inline void ufshcd_remove_non_printable(uint8_t *val) +{ + if (!val) + return; + + if (*val < 0x20 || *val > 0x7e) + *val = ' '; +} + +/** + * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power + * state) and waits for it to take effect. + * + */ +static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) +{ + unsigned long start = 0; + u8 status; + int ret; + + ret = ufshcd_send_uic_cmd(hba, cmd); + if (ret) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", + cmd->command, cmd->argument3, ret); + + return ret; + } + + start = get_timer(0); + do { + status = ufshcd_get_upmcrs(hba); + if (get_timer(start) > UFS_UIC_CMD_TIMEOUT) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x failed, host upmcrs:0x%x\n", + cmd->command, status); + ret = (status != PWR_OK) ? status : -1; + break; + } + } while (status != PWR_LOCAL); + + return ret; +} + +/** + * ufshcd_uic_change_pwr_mode - Perform the UIC power mode change + * using DME_SET primitives. + */ +static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_SET; + uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); + uic_cmd.argument3 = mode; + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + + return ret; +} + +static +void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufs_hba *hba, + struct scsi_cmd *pccb, u32 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr; + unsigned int cdb_len; + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = + UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, upiu_flags, + pccb->lun, TASK_TAG); + ucd_req_ptr->header.dword_1 = + UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0); + + /* Total EHS length and Data segment length will be zero */ + ucd_req_ptr->header.dword_2 = 0; + + ucd_req_ptr->sc.exp_data_transfer_len = cpu_to_be32(pccb->datalen); + + cdb_len = min_t(unsigned short, pccb->cmdlen, UFS_CDB_SIZE); + memset(ucd_req_ptr->sc.cdb, 0, UFS_CDB_SIZE); + memcpy(ucd_req_ptr->sc.cdb, pccb->cmd, cdb_len); + + memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); +} + +static inline void prepare_prdt_desc(struct ufshcd_sg_entry *entry, + unsigned char *buf, ulong len) +{ + entry->size = cpu_to_le32(len) | GENMASK(1, 0); + entry->base_addr = cpu_to_le32(lower_32_bits((unsigned long)buf)); + entry->upper_addr = cpu_to_le32(upper_32_bits((unsigned long)buf)); +} + +static void prepare_prdt_table(struct ufs_hba *hba, struct scsi_cmd *pccb) +{ + struct utp_transfer_req_desc *req_desc = hba->utrdl; + struct ufshcd_sg_entry *prd_table = hba->ucd_prdt_ptr; + ulong datalen = pccb->datalen; + int table_length; + u8 *buf; + int i; + + if (!datalen) { + req_desc->prd_table_length = 0; + return; + } + + table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY); + buf = pccb->pdata; + i = table_length; + while (--i) { + prepare_prdt_desc(&prd_table[table_length - i - 1], buf, + MAX_PRDT_ENTRY - 1); + buf += MAX_PRDT_ENTRY; + datalen -= MAX_PRDT_ENTRY; + } + + prepare_prdt_desc(&prd_table[table_length - i - 1], buf, datalen - 1); + + req_desc->prd_table_length = table_length; +} + +static int ufs_scsi_exec(struct udevice *scsi_dev, struct scsi_cmd *pccb) +{ + struct ufs_hba *hba = dev_get_uclass_priv(scsi_dev->parent); + struct utp_transfer_req_desc *req_desc = hba->utrdl; + u32 upiu_flags; + int ocs, result = 0; + u8 scsi_status; + + ufshcd_prepare_req_desc_hdr(req_desc, &upiu_flags, pccb->dma_dir); + ufshcd_prepare_utp_scsi_cmd_upiu(hba, pccb, upiu_flags); + prepare_prdt_table(hba, pccb); + + ufshcd_send_command(hba, TASK_TAG); + + ocs = ufshcd_get_tr_ocs(hba); + switch (ocs) { + case OCS_SUCCESS: + result = ufshcd_get_req_rsp(hba->ucd_rsp_ptr); + switch (result) { + case UPIU_TRANSACTION_RESPONSE: + result = ufshcd_get_rsp_upiu_result(hba->ucd_rsp_ptr); + + scsi_status = result & MASK_SCSI_STATUS; + if (scsi_status) + return -EINVAL; + + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + dev_err(hba->dev, + "Reject UPIU not fully implemented\n"); + return -EINVAL; + default: + dev_err(hba->dev, + "Unexpected request response code = %x\n", + result); + return -EINVAL; + } + break; + default: + dev_err(hba->dev, "OCS error from controller = %x\n", ocs); + return -EINVAL; + } + + return 0; +} + +static inline int ufshcd_read_desc(struct ufs_hba *hba, enum desc_idn desc_id, + int desc_index, u8 *buf, u32 size) +{ + return ufshcd_read_desc_param(hba, desc_id, desc_index, 0, buf, size); +} + +static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size) +{ + return ufshcd_read_desc(hba, QUERY_DESC_IDN_DEVICE, 0, buf, size); +} + +/** + * ufshcd_read_string_desc - read string descriptor + * + */ +int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index, + u8 *buf, u32 size, bool ascii) +{ + int err = 0; + + err = ufshcd_read_desc(hba, QUERY_DESC_IDN_STRING, desc_index, buf, + size); + + if (err) { + dev_err(hba->dev, "%s: reading String Desc failed after %d retries. err = %d\n", + __func__, QUERY_REQ_RETRIES, err); + goto out; + } + + if (ascii) { + int desc_len; + int ascii_len; + int i; + u8 *buff_ascii; + + desc_len = buf[0]; + /* remove header and divide by 2 to move from UTF16 to UTF8 */ + ascii_len = (desc_len - QUERY_DESC_HDR_SIZE) / 2 + 1; + if (size < ascii_len + QUERY_DESC_HDR_SIZE) { + dev_err(hba->dev, "%s: buffer allocated size is too small\n", + __func__); + err = -ENOMEM; + goto out; + } + + buff_ascii = kmalloc(ascii_len, GFP_KERNEL); + if (!buff_ascii) { + err = -ENOMEM; + goto out; + } + + /* + * the descriptor contains string in UTF16 format + * we need to convert to utf-8 so it can be displayed + */ + utf16_to_utf8(buff_ascii, + (uint16_t *)&buf[QUERY_DESC_HDR_SIZE], ascii_len); + + /* replace non-printable or non-ASCII characters with spaces */ + for (i = 0; i < ascii_len; i++) + ufshcd_remove_non_printable(&buff_ascii[i]); + + memset(buf + QUERY_DESC_HDR_SIZE, 0, + size - QUERY_DESC_HDR_SIZE); + memcpy(buf + QUERY_DESC_HDR_SIZE, buff_ascii, ascii_len); + buf[QUERY_DESC_LENGTH_OFFSET] = ascii_len + QUERY_DESC_HDR_SIZE; + kfree(buff_ascii); + } +out: + return err; +} + +static int ufs_get_device_desc(struct ufs_hba *hba, + struct ufs_dev_desc *dev_desc) +{ + int err; + size_t buff_len; + u8 model_index; + u8 *desc_buf; + + buff_len = max_t(size_t, hba->desc_size.dev_desc, + QUERY_DESC_MAX_SIZE + 1); + desc_buf = kmalloc(buff_len, GFP_KERNEL); + if (!desc_buf) { + err = -ENOMEM; + goto out; + } + + err = ufshcd_read_device_desc(hba, desc_buf, hba->desc_size.dev_desc); + if (err) { + dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n", + __func__, err); + goto out; + } + + /* + * getting vendor (manufacturerID) and Bank Index in big endian + * format + */ + dev_desc->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 | + desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1]; + + model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME]; + + /* Zero-pad entire buffer for string termination. */ + memset(desc_buf, 0, buff_len); + + err = ufshcd_read_string_desc(hba, model_index, desc_buf, + QUERY_DESC_MAX_SIZE, true/*ASCII*/); + if (err) { + dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n", + __func__, err); + goto out; + } + + desc_buf[QUERY_DESC_MAX_SIZE] = '\0'; + strlcpy(dev_desc->model, (char *)(desc_buf + QUERY_DESC_HDR_SIZE), + min_t(u8, desc_buf[QUERY_DESC_LENGTH_OFFSET], + MAX_MODEL_LEN)); + + /* Null terminate the model string */ + dev_desc->model[MAX_MODEL_LEN] = '\0'; + +out: + kfree(desc_buf); + return err; +} + +/** + * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device + */ +static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba) +{ + struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info; + + if (hba->max_pwr_info.is_valid) + return 0; + + pwr_info->pwr_tx = FAST_MODE; + pwr_info->pwr_rx = FAST_MODE; + pwr_info->hs_rate = PA_HS_MODE_B; + + /* Get the connected lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), + &pwr_info->lane_rx); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &pwr_info->lane_tx); + + if (!pwr_info->lane_rx || !pwr_info->lane_tx) { + dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n", + __func__, pwr_info->lane_rx, pwr_info->lane_tx); + return -EINVAL; + } + + /* + * First, get the maximum gears of HS speed. + * If a zero value, it means there is no HSGEAR capability. + * Then, get the maximum gears of PWM speed. + */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n", + __func__, pwr_info->gear_rx); + return -EINVAL; + } + pwr_info->pwr_rx = SLOW_MODE; + } + + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n", + __func__, pwr_info->gear_tx); + return -EINVAL; + } + pwr_info->pwr_tx = SLOW_MODE; + } + + hba->max_pwr_info.is_valid = true; + return 0; +} + +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode) +{ + int ret; + + /* if already configured to the requested pwr_mode */ + if (pwr_mode->gear_rx == hba->pwr_info.gear_rx && + pwr_mode->gear_tx == hba->pwr_info.gear_tx && + pwr_mode->lane_rx == hba->pwr_info.lane_rx && + pwr_mode->lane_tx == hba->pwr_info.lane_tx && + pwr_mode->pwr_rx == hba->pwr_info.pwr_rx && + pwr_mode->pwr_tx == hba->pwr_info.pwr_tx && + pwr_mode->hs_rate == hba->pwr_info.hs_rate) { + dev_dbg(hba->dev, "%s: power already configured\n", __func__); + return 0; + } + + /* + * Configure attributes for power mode change with below. + * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, + * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, + * - PA_HSSERIES + */ + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), + pwr_mode->lane_rx); + if (pwr_mode->pwr_rx == FASTAUTO_MODE || pwr_mode->pwr_rx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE); + + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), + pwr_mode->lane_tx); + if (pwr_mode->pwr_tx == FASTAUTO_MODE || pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE); + + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE || + pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), + pwr_mode->hs_rate); + + ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 | + pwr_mode->pwr_tx); + + if (ret) { + dev_err(hba->dev, + "%s: power mode change failed %d\n", __func__, ret); + + return ret; + } + + /* Copy new Power Mode to power info */ + memcpy(&hba->pwr_info, pwr_mode, sizeof(struct ufs_pa_layer_attr)); + + return ret; +} + +/** + * ufshcd_verify_dev_init() - Verify device initialization + * + */ +static int ufshcd_verify_dev_init(struct ufs_hba *hba) +{ + int retries; + int err; + + for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, + NOP_OUT_TIMEOUT); + if (!err || err == -ETIMEDOUT) + break; + + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); + } + + if (err) + dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); + + return err; +} + +/** + * ufshcd_complete_dev_init() - checks device readiness + */ +static int ufshcd_complete_dev_init(struct ufs_hba *hba) +{ + int i; + int err; + bool flag_res = 1; + + err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, NULL); + if (err) { + dev_err(hba->dev, + "%s setting fDeviceInit flag failed with error %d\n", + __func__, err); + goto out; + } + + /* poll for max. 1000 iterations for fDeviceInit flag to clear */ + for (i = 0; i < 1000 && !err && flag_res; i++) + err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, + &flag_res); + + if (err) + dev_err(hba->dev, + "%s reading fDeviceInit flag failed with error %d\n", + __func__, err); + else if (flag_res) + dev_err(hba->dev, + "%s fDeviceInit was not cleared by the device\n", + __func__); + +out: + return err; +} + +static void ufshcd_def_desc_sizes(struct ufs_hba *hba) +{ + hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE; + hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE; + hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE; + hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE; + hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE; + hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE; + hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE; +} + +int ufs_start(struct ufs_hba *hba) +{ + struct ufs_dev_desc card = {0}; + int ret; + + ret = ufshcd_link_startup(hba); + if (ret) + return ret; + + ret = ufshcd_verify_dev_init(hba); + if (ret) + return ret; + + ret = ufshcd_complete_dev_init(hba); + if (ret) + return ret; + + /* Init check for device descriptor sizes */ + ufshcd_init_desc_sizes(hba); + + ret = ufs_get_device_desc(hba, &card); + if (ret) { + dev_err(hba->dev, "%s: Failed getting device info. err = %d\n", + __func__, ret); + + return ret; + } + + if (ufshcd_get_max_pwr_mode(hba)) { + dev_err(hba->dev, + "%s: Failed getting max supported power mode\n", + __func__); + } else { + ret = ufshcd_change_power_mode(hba, &hba->max_pwr_info.info); + if (ret) { + dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n", + __func__, ret); + + return ret; + } + + printf("Device at %s up at:", hba->dev->name); + ufshcd_print_pwr_info(hba); + } + + return 0; +} + +int ufshcd_probe(struct udevice *ufs_dev, struct ufs_hba_ops *hba_ops) +{ + struct ufs_hba *hba = dev_get_uclass_priv(ufs_dev); + struct scsi_platdata *scsi_plat; + struct udevice *scsi_dev; + int err; + + device_find_first_child(ufs_dev, &scsi_dev); + if (!scsi_dev) + return -ENODEV; + + scsi_plat = dev_get_uclass_platdata(scsi_dev); + scsi_plat->max_id = UFSHCD_MAX_ID; + scsi_plat->max_lun = UFS_MAX_LUNS; + scsi_plat->max_bytes_per_req = UFS_MAX_BYTES; + + hba->dev = ufs_dev; + hba->ops = hba_ops; + hba->mmio_base = (void *)dev_read_addr(ufs_dev); + + /* Set descriptor lengths to specification defaults */ + ufshcd_def_desc_sizes(hba); + + ufshcd_ops_init(hba); + + /* Read capabilties registers */ + hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES); + + /* Get UFS version supported by the controller */ + hba->version = ufshcd_get_ufs_version(hba); + if (hba->version != UFSHCI_VERSION_10 && + hba->version != UFSHCI_VERSION_11 && + hba->version != UFSHCI_VERSION_20 && + hba->version != UFSHCI_VERSION_21) + dev_err(hba->dev, "invalid UFS version 0x%x\n", + hba->version); + + /* Get Interrupt bit mask per version */ + hba->intr_mask = ufshcd_get_intr_mask(hba); + + /* Allocate memory for host memory space */ + err = ufshcd_memory_alloc(hba); + if (err) { + dev_err(hba->dev, "Memory allocation failed\n"); + return err; + } + + /* Configure Local data structures */ + ufshcd_host_memory_configure(hba); + + /* + * In order to avoid any spurious interrupt immediately after + * registering UFS controller interrupt handler, clear any pending UFS + * interrupt status and disable all the UFS interrupts. + */ + ufshcd_writel(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS), + REG_INTERRUPT_STATUS); + ufshcd_writel(hba, 0, REG_INTERRUPT_ENABLE); + + err = ufshcd_hba_enable(hba); + if (err) { + dev_err(hba->dev, "Host controller enable failed\n"); + return err; + } + + err = ufs_start(hba); + if (err) + return err; + + return 0; +} + +int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp) +{ + int ret = device_bind_driver(ufs_dev, "ufs_scsi", "ufs_scsi", + scsi_devp); + + return ret; +} + +static struct scsi_ops ufs_ops = { + .exec = ufs_scsi_exec, +}; + +int ufs_probe_dev(int index) +{ + struct udevice *dev; + + return uclass_get_device(UCLASS_UFS, index, &dev); +} + +int ufs_probe(void) +{ + struct udevice *dev; + int ret, i; + + for (i = 0;; i++) { + ret = uclass_get_device(UCLASS_UFS, i, &dev); + if (ret == -ENODEV) + break; + } + + return 0; +} + +U_BOOT_DRIVER(ufs_scsi) = { + .id = UCLASS_SCSI, + .name = "ufs_scsi", + .ops = &ufs_ops, +}; diff --git a/drivers/ufs/ufs.h b/drivers/ufs/ufs.h new file mode 100644 index 0000000000..e0bde93776 --- /dev/null +++ b/drivers/ufs/ufs.h @@ -0,0 +1,918 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __UFS_H +#define __UFS_H + +#include <asm/io.h> +#include <dm.h> + +#include "unipro.h" + +#define UFS_CDB_SIZE 16 +#define UPIU_TRANSACTION_UIC_CMD 0x1F +#define UIC_CMD_SIZE (sizeof(u32) * 4) +#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18 +#define UFS_MAX_LUNS 0x7F + +enum { + TASK_REQ_UPIU_SIZE_DWORDS = 8, + TASK_RSP_UPIU_SIZE_DWORDS = 8, + ALIGNED_UPIU_SIZE = 512, +}; + +/* UFS device power modes */ +enum ufs_dev_pwr_mode { + UFS_ACTIVE_PWR_MODE = 1, + UFS_SLEEP_PWR_MODE = 2, + UFS_POWERDOWN_PWR_MODE = 3, +}; + +enum ufs_notify_change_status { + PRE_CHANGE, + POST_CHANGE, +}; + +struct ufs_pa_layer_attr { + u32 gear_rx; + u32 gear_tx; + u32 lane_rx; + u32 lane_tx; + u32 pwr_rx; + u32 pwr_tx; + u32 hs_rate; +}; + +struct ufs_pwr_mode_info { + bool is_valid; + struct ufs_pa_layer_attr info; +}; + +enum ufs_desc_def_size { + QUERY_DESC_DEVICE_DEF_SIZE = 0x40, + QUERY_DESC_CONFIGURATION_DEF_SIZE = 0x90, + QUERY_DESC_UNIT_DEF_SIZE = 0x23, + QUERY_DESC_INTERCONNECT_DEF_SIZE = 0x06, + QUERY_DESC_GEOMETRY_DEF_SIZE = 0x48, + QUERY_DESC_POWER_DEF_SIZE = 0x62, + QUERY_DESC_HEALTH_DEF_SIZE = 0x25, +}; + +struct ufs_desc_size { + int dev_desc; + int pwr_desc; + int geom_desc; + int interc_desc; + int unit_desc; + int conf_desc; + int hlth_desc; +}; + +/* + * Request Descriptor Definitions + */ + +/* Transfer request command type */ +enum { + UTP_CMD_TYPE_SCSI = 0x0, + UTP_CMD_TYPE_UFS = 0x1, + UTP_CMD_TYPE_DEV_MANAGE = 0x2, +}; + +/* UTP Transfer Request Command Offset */ +#define UPIU_COMMAND_TYPE_OFFSET 28 + +/* Offset of the response code in the UPIU header */ +#define UPIU_RSP_CODE_OFFSET 8 + +/* To accommodate UFS2.0 required Command type */ +enum { + UTP_CMD_TYPE_UFS_STORAGE = 0x1, +}; + +enum { + UTP_SCSI_COMMAND = 0x00000000, + UTP_NATIVE_UFS_COMMAND = 0x10000000, + UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, + UTP_REQ_DESC_INT_CMD = 0x01000000, +}; + +/* UTP Transfer Request Data Direction (DD) */ +enum { + UTP_NO_DATA_TRANSFER = 0x00000000, + UTP_HOST_TO_DEVICE = 0x02000000, + UTP_DEVICE_TO_HOST = 0x04000000, +}; + +/* Overall command status values */ +enum { + OCS_SUCCESS = 0x0, + OCS_INVALID_CMD_TABLE_ATTR = 0x1, + OCS_INVALID_PRDT_ATTR = 0x2, + OCS_MISMATCH_DATA_BUF_SIZE = 0x3, + OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, + OCS_PEER_COMM_FAILURE = 0x5, + OCS_ABORTED = 0x6, + OCS_FATAL_ERROR = 0x7, + OCS_INVALID_COMMAND_STATUS = 0x0F, + MASK_OCS = 0x0F, +}; + +/* The maximum length of the data byte count field in the PRDT is 256KB */ +#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024) +/* The granularity of the data byte count field in the PRDT is 32-bit */ +#define PRDT_DATA_BYTE_COUNT_PAD 4 + +#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req)) +#define QUERY_DESC_MAX_SIZE 255 +#define QUERY_DESC_MIN_SIZE 2 +#define QUERY_DESC_HDR_SIZE 2 +#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \ + (sizeof(struct utp_upiu_header))) +#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18 +#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ + cpu_to_be32((byte3 << 24) | (byte2 << 16) |\ + (byte1 << 8) | (byte0)) +/* + * UFS Protocol Information Unit related definitions + */ + +/* Task management functions */ +enum { + UFS_ABORT_TASK = 0x01, + UFS_ABORT_TASK_SET = 0x02, + UFS_CLEAR_TASK_SET = 0x04, + UFS_LOGICAL_RESET = 0x08, + UFS_QUERY_TASK = 0x80, + UFS_QUERY_TASK_SET = 0x81, +}; + +/* UTP UPIU Transaction Codes Initiator to Target */ +enum { + UPIU_TRANSACTION_NOP_OUT = 0x00, + UPIU_TRANSACTION_COMMAND = 0x01, + UPIU_TRANSACTION_DATA_OUT = 0x02, + UPIU_TRANSACTION_TASK_REQ = 0x04, + UPIU_TRANSACTION_QUERY_REQ = 0x16, +}; + +/* UTP UPIU Transaction Codes Target to Initiator */ +enum { + UPIU_TRANSACTION_NOP_IN = 0x20, + UPIU_TRANSACTION_RESPONSE = 0x21, + UPIU_TRANSACTION_DATA_IN = 0x22, + UPIU_TRANSACTION_TASK_RSP = 0x24, + UPIU_TRANSACTION_READY_XFER = 0x31, + UPIU_TRANSACTION_QUERY_RSP = 0x36, + UPIU_TRANSACTION_REJECT_UPIU = 0x3F, +}; + +/* UPIU Read/Write flags */ +enum { + UPIU_CMD_FLAGS_NONE = 0x00, + UPIU_CMD_FLAGS_WRITE = 0x20, + UPIU_CMD_FLAGS_READ = 0x40, +}; + +/* UPIU Task Attributes */ +enum { + UPIU_TASK_ATTR_SIMPLE = 0x00, + UPIU_TASK_ATTR_ORDERED = 0x01, + UPIU_TASK_ATTR_HEADQ = 0x02, + UPIU_TASK_ATTR_ACA = 0x03, +}; + +/* UPIU Query request function */ +enum { + UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01, + UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81, +}; + +/* Offset of the response code in the UPIU header */ +#define UPIU_RSP_CODE_OFFSET 8 + +enum { + MASK_SCSI_STATUS = 0xFF, + MASK_TASK_RESPONSE = 0xFF00, + MASK_RSP_UPIU_RESULT = 0xFFFF, + MASK_QUERY_DATA_SEG_LEN = 0xFFFF, + MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF, + MASK_RSP_EXCEPTION_EVENT = 0x10000, + MASK_TM_SERVICE_RESP = 0xFF, + MASK_TM_FUNC = 0xFF, +}; + +/* UTP QUERY Transaction Specific Fields OpCode */ +enum query_opcode { + UPIU_QUERY_OPCODE_NOP = 0x0, + UPIU_QUERY_OPCODE_READ_DESC = 0x1, + UPIU_QUERY_OPCODE_WRITE_DESC = 0x2, + UPIU_QUERY_OPCODE_READ_ATTR = 0x3, + UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4, + UPIU_QUERY_OPCODE_READ_FLAG = 0x5, + UPIU_QUERY_OPCODE_SET_FLAG = 0x6, + UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7, + UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8, +}; + +/* Query response result code */ +enum { + QUERY_RESULT_SUCCESS = 0x00, + QUERY_RESULT_NOT_READABLE = 0xF6, + QUERY_RESULT_NOT_WRITEABLE = 0xF7, + QUERY_RESULT_ALREADY_WRITTEN = 0xF8, + QUERY_RESULT_INVALID_LENGTH = 0xF9, + QUERY_RESULT_INVALID_VALUE = 0xFA, + QUERY_RESULT_INVALID_SELECTOR = 0xFB, + QUERY_RESULT_INVALID_INDEX = 0xFC, + QUERY_RESULT_INVALID_IDN = 0xFD, + QUERY_RESULT_INVALID_OPCODE = 0xFE, + QUERY_RESULT_GENERAL_FAILURE = 0xFF, +}; + +enum { + UPIU_COMMAND_SET_TYPE_SCSI = 0x0, + UPIU_COMMAND_SET_TYPE_UFS = 0x1, + UPIU_COMMAND_SET_TYPE_QUERY = 0x2, +}; + +/* Flag idn for Query Requests*/ +enum flag_idn { + QUERY_FLAG_IDN_FDEVICEINIT = 0x01, + QUERY_FLAG_IDN_PERMANENT_WPE = 0x02, + QUERY_FLAG_IDN_PWR_ON_WPE = 0x03, + QUERY_FLAG_IDN_BKOPS_EN = 0x04, + QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05, + QUERY_FLAG_IDN_PURGE_ENABLE = 0x06, + QUERY_FLAG_IDN_RESERVED2 = 0x07, + QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08, + QUERY_FLAG_IDN_BUSY_RTC = 0x09, + QUERY_FLAG_IDN_RESERVED3 = 0x0A, + QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B, +}; + +/* Attribute idn for Query requests */ +enum attr_idn { + QUERY_ATTR_IDN_BOOT_LU_EN = 0x00, + QUERY_ATTR_IDN_RESERVED = 0x01, + QUERY_ATTR_IDN_POWER_MODE = 0x02, + QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03, + QUERY_ATTR_IDN_OOO_DATA_EN = 0x04, + QUERY_ATTR_IDN_BKOPS_STATUS = 0x05, + QUERY_ATTR_IDN_PURGE_STATUS = 0x06, + QUERY_ATTR_IDN_MAX_DATA_IN = 0x07, + QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08, + QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09, + QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A, + QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B, + QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C, + QUERY_ATTR_IDN_EE_CONTROL = 0x0D, + QUERY_ATTR_IDN_EE_STATUS = 0x0E, + QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F, + QUERY_ATTR_IDN_CNTX_CONF = 0x10, + QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11, + QUERY_ATTR_IDN_RESERVED2 = 0x12, + QUERY_ATTR_IDN_RESERVED3 = 0x13, + QUERY_ATTR_IDN_FFU_STATUS = 0x14, + QUERY_ATTR_IDN_PSA_STATE = 0x15, + QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16, +}; + +/* Descriptor idn for Query requests */ +enum desc_idn { + QUERY_DESC_IDN_DEVICE = 0x0, + QUERY_DESC_IDN_CONFIGURATION = 0x1, + QUERY_DESC_IDN_UNIT = 0x2, + QUERY_DESC_IDN_RFU_0 = 0x3, + QUERY_DESC_IDN_INTERCONNECT = 0x4, + QUERY_DESC_IDN_STRING = 0x5, + QUERY_DESC_IDN_RFU_1 = 0x6, + QUERY_DESC_IDN_GEOMETRY = 0x7, + QUERY_DESC_IDN_POWER = 0x8, + QUERY_DESC_IDN_HEALTH = 0x9, + QUERY_DESC_IDN_MAX, +}; + +enum desc_header_offset { + QUERY_DESC_LENGTH_OFFSET = 0x00, + QUERY_DESC_DESC_TYPE_OFFSET = 0x01, +}; + +struct ufshcd_sg_entry { + __le32 base_addr; + __le32 upper_addr; + __le32 reserved; + __le32 size; +}; + +#define MAX_BUFF 128 +/** + * struct utp_transfer_cmd_desc - UFS Command Descriptor structure + * @command_upiu: Command UPIU Frame address + * @response_upiu: Response UPIU Frame address + * @prd_table: Physical Region Descriptor + */ +struct utp_transfer_cmd_desc { + u8 command_upiu[ALIGNED_UPIU_SIZE]; + u8 response_upiu[ALIGNED_UPIU_SIZE]; + struct ufshcd_sg_entry prd_table[MAX_BUFF]; +}; + +/** + * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD + * @dword0: Descriptor Header DW0 + * @dword1: Descriptor Header DW1 + * @dword2: Descriptor Header DW2 + * @dword3: Descriptor Header DW3 + */ +struct request_desc_header { + __le32 dword_0; + __le32 dword_1; + __le32 dword_2; + __le32 dword_3; +}; + +/** + * struct utp_transfer_req_desc - UTRD structure + * @header: UTRD header DW-0 to DW-3 + * @command_desc_base_addr_lo: UCD base address low DW-4 + * @command_desc_base_addr_hi: UCD base address high DW-5 + * @response_upiu_length: response UPIU length DW-6 + * @response_upiu_offset: response UPIU offset DW-6 + * @prd_table_length: Physical region descriptor length DW-7 + * @prd_table_offset: Physical region descriptor offset DW-7 + */ +struct utp_transfer_req_desc { + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-5*/ + __le32 command_desc_base_addr_lo; + __le32 command_desc_base_addr_hi; + + /* DW 6 */ + __le16 response_upiu_length; + __le16 response_upiu_offset; + + /* DW 7 */ + __le16 prd_table_length; + __le16 prd_table_offset; +}; + +/** + * struct utp_upiu_header - UPIU header structure + * @dword_0: UPIU header DW-0 + * @dword_1: UPIU header DW-1 + * @dword_2: UPIU header DW-2 + */ +struct utp_upiu_header { + __be32 dword_0; + __be32 dword_1; + __be32 dword_2; +}; + +/** + * struct utp_upiu_query - upiu request buffer structure for + * query request. + * @opcode: command to perform B-0 + * @idn: a value that indicates the particular type of data B-1 + * @index: Index to further identify data B-2 + * @selector: Index to further identify data B-3 + * @reserved_osf: spec reserved field B-4,5 + * @length: number of descriptor bytes to read/write B-6,7 + * @value: Attribute value to be written DW-5 + * @reserved: spec reserved DW-6,7 + */ +struct utp_upiu_query { + __u8 opcode; + __u8 idn; + __u8 index; + __u8 selector; + __be16 reserved_osf; + __be16 length; + __be32 value; + __be32 reserved[2]; +}; + +/** + * struct utp_upiu_cmd - Command UPIU structure + * @data_transfer_len: Data Transfer Length DW-3 + * @cdb: Command Descriptor Block CDB DW-4 to DW-7 + */ +struct utp_upiu_cmd { + __be32 exp_data_transfer_len; + u8 cdb[UFS_CDB_SIZE]; +}; + +/* + * UTMRD structure. + */ +struct utp_task_req_desc { + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-11 - Task request UPIU structure */ + struct utp_upiu_header req_header; + __be32 input_param1; + __be32 input_param2; + __be32 input_param3; + __be32 __reserved1[2]; + + /* DW 12-19 - Task Management Response UPIU structure */ + struct utp_upiu_header rsp_header; + __be32 output_param1; + __be32 output_param2; + __be32 __reserved2[3]; +}; + +/** + * struct utp_upiu_req - general upiu request structure + * @header:UPIU header structure DW-0 to DW-2 + * @sc: fields structure for scsi command DW-3 to DW-7 + * @qr: fields structure for query request DW-3 to DW-7 + */ +struct utp_upiu_req { + struct utp_upiu_header header; + union { + struct utp_upiu_cmd sc; + struct utp_upiu_query qr; + struct utp_upiu_query tr; + /* use utp_upiu_query to host the 4 dwords of uic command */ + struct utp_upiu_query uc; + }; +}; + +/** + * struct utp_cmd_rsp - Response UPIU structure + * @residual_transfer_count: Residual transfer count DW-3 + * @reserved: Reserved double words DW-4 to DW-7 + * @sense_data_len: Sense data length DW-8 U16 + * @sense_data: Sense data field DW-8 to DW-12 + */ +struct utp_cmd_rsp { + __be32 residual_transfer_count; + __be32 reserved[4]; + __be16 sense_data_len; + u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH]; +}; + +/** + * struct utp_upiu_rsp - general upiu response structure + * @header: UPIU header structure DW-0 to DW-2 + * @sr: fields structure for scsi command DW-3 to DW-12 + * @qr: fields structure for query request DW-3 to DW-7 + */ +struct utp_upiu_rsp { + struct utp_upiu_header header; + union { + struct utp_cmd_rsp sr; + struct utp_upiu_query qr; + }; +}; + +#define MAX_MODEL_LEN 16 +/** + * ufs_dev_desc - ufs device details from the device descriptor + * + * @wmanufacturerid: card details + * @model: card model + */ +struct ufs_dev_desc { + u16 wmanufacturerid; + char model[MAX_MODEL_LEN + 1]; +}; + +/* Device descriptor parameters offsets in bytes*/ +enum device_desc_param { + DEVICE_DESC_PARAM_LEN = 0x0, + DEVICE_DESC_PARAM_TYPE = 0x1, + DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2, + DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3, + DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4, + DEVICE_DESC_PARAM_PRTCL = 0x5, + DEVICE_DESC_PARAM_NUM_LU = 0x6, + DEVICE_DESC_PARAM_NUM_WLU = 0x7, + DEVICE_DESC_PARAM_BOOT_ENBL = 0x8, + DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9, + DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA, + DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB, + DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC, + DEVICE_DESC_PARAM_SEC_LU = 0xD, + DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE, + DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF, + DEVICE_DESC_PARAM_SPEC_VER = 0x10, + DEVICE_DESC_PARAM_MANF_DATE = 0x12, + DEVICE_DESC_PARAM_MANF_NAME = 0x14, + DEVICE_DESC_PARAM_PRDCT_NAME = 0x15, + DEVICE_DESC_PARAM_SN = 0x16, + DEVICE_DESC_PARAM_OEM_ID = 0x17, + DEVICE_DESC_PARAM_MANF_ID = 0x18, + DEVICE_DESC_PARAM_UD_OFFSET = 0x1A, + DEVICE_DESC_PARAM_UD_LEN = 0x1B, + DEVICE_DESC_PARAM_RTT_CAP = 0x1C, + DEVICE_DESC_PARAM_FRQ_RTC = 0x1D, + DEVICE_DESC_PARAM_UFS_FEAT = 0x1F, + DEVICE_DESC_PARAM_FFU_TMT = 0x20, + DEVICE_DESC_PARAM_Q_DPTH = 0x21, + DEVICE_DESC_PARAM_DEV_VER = 0x22, + DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24, + DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25, + DEVICE_DESC_PARAM_PSA_TMT = 0x29, + DEVICE_DESC_PARAM_PRDCT_REV = 0x2A, +}; + +struct ufs_hba; + +enum { + UFSHCD_MAX_CHANNEL = 0, + UFSHCD_MAX_ID = 1, +}; + +enum dev_cmd_type { + DEV_CMD_TYPE_NOP = 0x0, + DEV_CMD_TYPE_QUERY = 0x1, +}; + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @result: UIC command result + * @done: UIC command completion + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + int result; +}; + +/* GenSelectorIndex calculation macros for M-PHY attributes */ +#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane) +#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane)) + +#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ + ((sel) & 0xFFFF)) +#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) +#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) +#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) + +/* Link Status*/ +enum link_status { + UFSHCD_LINK_IS_DOWN = 1, + UFSHCD_LINK_IS_UP = 2, +}; + +#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ + ((sel) & 0xFFFF)) +#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) +#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) +#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) + +/* UIC Commands */ +enum uic_cmd_dme { + UIC_CMD_DME_GET = 0x01, + UIC_CMD_DME_SET = 0x02, + UIC_CMD_DME_PEER_GET = 0x03, + UIC_CMD_DME_PEER_SET = 0x04, + UIC_CMD_DME_POWERON = 0x10, + UIC_CMD_DME_POWEROFF = 0x11, + UIC_CMD_DME_ENABLE = 0x12, + UIC_CMD_DME_RESET = 0x14, + UIC_CMD_DME_END_PT_RST = 0x15, + UIC_CMD_DME_LINK_STARTUP = 0x16, + UIC_CMD_DME_HIBER_ENTER = 0x17, + UIC_CMD_DME_HIBER_EXIT = 0x18, + UIC_CMD_DME_TEST_MODE = 0x1A, +}; + +/* UIC Config result code / Generic error code */ +enum { + UIC_CMD_RESULT_SUCCESS = 0x00, + UIC_CMD_RESULT_INVALID_ATTR = 0x01, + UIC_CMD_RESULT_FAILURE = 0x01, + UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, + UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, + UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, + UIC_CMD_RESULT_BAD_INDEX = 0x05, + UIC_CMD_RESULT_LOCKED_ATTR = 0x06, + UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, + UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, + UIC_CMD_RESULT_BUSY = 0x09, + UIC_CMD_RESULT_DME_FAILURE = 0x0A, +}; + +#define MASK_UIC_COMMAND_RESULT 0xFF + +/* Host <-> Device UniPro Link state */ +enum uic_link_state { + UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ + UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */ + UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */ +}; + +/* UIC command interfaces for DME primitives */ +#define DME_LOCAL 0 +#define DME_PEER 1 +#define ATTR_SET_NOR 0 /* NORMAL */ +#define ATTR_SET_ST 1 /* STATIC */ + +int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, + u8 attr_set, u32 mib_val, u8 peer); +int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer); + +static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, + mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_get(struct ufs_hba *hba, + u32 attr_sel, u32 *mib_val) +{ + return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, + u32 attr_sel, u32 *mib_val) +{ + return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER); +} + +static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, + mib_val, DME_PEER); +} + +/** + * struct ufs_query_req - parameters for building a query request + * @query_func: UPIU header query function + * @upiu_req: the query request data + */ +struct ufs_query_req { + u8 query_func; + struct utp_upiu_query upiu_req; +}; + +/** + * struct ufs_query_resp - UPIU QUERY + * @response: device response code + * @upiu_res: query response data + */ +struct ufs_query_res { + u8 response; + struct utp_upiu_query upiu_res; +}; + +/** + * struct ufs_query - holds relevant data structures for query request + * @request: request upiu and function + * @descriptor: buffer for sending/receiving descriptor + * @response: response upiu and response + */ +struct ufs_query { + struct ufs_query_req request; + u8 *descriptor; + struct ufs_query_res response; +}; + +/** + * struct ufs_dev_cmd - all assosiated fields with device management commands + * @type: device management command type - Query, NOP OUT + * @tag_wq: wait queue until free command slot is available + */ +struct ufs_dev_cmd { + enum dev_cmd_type type; + struct ufs_query query; +}; + +struct ufs_hba_ops { + int (*init)(struct ufs_hba *hba); + int (*hce_enable_notify)(struct ufs_hba *hba, + enum ufs_notify_change_status); + int (*link_startup_notify)(struct ufs_hba *hba, + enum ufs_notify_change_status); + int (*phy_initialization)(struct ufs_hba *hba); +}; + +struct ufs_hba { + struct udevice *dev; + void __iomem *mmio_base; + struct ufs_hba_ops *ops; + struct ufs_desc_size desc_size; + u32 capabilities; + u32 version; + u32 intr_mask; + u32 quirks; +/* + * If UFS host controller is having issue in processing LCC (Line + * Control Command) coming from device then enable this quirk. + * When this quirk is enabled, host controller driver should disable + * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE + * attribute of device to 0). + */ +#define UFSHCD_QUIRK_BROKEN_LCC 0x1 + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl; + struct utp_transfer_req_desc *utrdl; + /* TODO: Add Task Manegement Support */ + struct utp_task_req_desc *utmrdl; + + struct utp_upiu_req *ucd_req_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + /* Power Mode information */ + enum ufs_dev_pwr_mode curr_dev_pwr_mode; + struct ufs_pa_layer_attr pwr_info; + struct ufs_pwr_mode_info max_pwr_info; + + struct ufs_dev_cmd dev_cmd; +}; + +static inline int ufshcd_ops_init(struct ufs_hba *hba) +{ + if (hba->ops && hba->ops->init) + return hba->ops->init(hba); + + return 0; +} + +static inline int ufshcd_ops_hce_enable_notify(struct ufs_hba *hba, + bool status) +{ + if (hba->ops && hba->ops->hce_enable_notify) + return hba->ops->hce_enable_notify(hba, status); + + return 0; +} + +static inline int ufshcd_ops_link_startup_notify(struct ufs_hba *hba, + bool status) +{ + if (hba->ops && hba->ops->link_startup_notify) + return hba->ops->link_startup_notify(hba, status); + + return 0; +} + +/* Controller UFSHCI version */ +enum { + UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */ + UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */ + UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */ + UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */ +}; + +/* Interrupt disable masks */ +enum { + /* Interrupt disable mask for UFSHCI v1.0 */ + INTERRUPT_MASK_ALL_VER_10 = 0x30FFF, + INTERRUPT_MASK_RW_VER_10 = 0x30000, + + /* Interrupt disable mask for UFSHCI v1.1 */ + INTERRUPT_MASK_ALL_VER_11 = 0x31FFF, + + /* Interrupt disable mask for UFSHCI v2.1 */ + INTERRUPT_MASK_ALL_VER_21 = 0x71FFF, +}; + +/* UFSHCI Registers */ +enum { + REG_CONTROLLER_CAPABILITIES = 0x00, + REG_UFS_VERSION = 0x08, + REG_CONTROLLER_DEV_ID = 0x10, + REG_CONTROLLER_PROD_ID = 0x14, + REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18, + REG_INTERRUPT_STATUS = 0x20, + REG_INTERRUPT_ENABLE = 0x24, + REG_CONTROLLER_STATUS = 0x30, + REG_CONTROLLER_ENABLE = 0x34, + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, + REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, + REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, + REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, + REG_UIC_ERROR_CODE_DME = 0x48, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, + REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, + REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, + REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, + REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, + REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, + REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, + REG_UTP_TASK_REQ_DOOR_BELL = 0x78, + REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, + REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, + REG_UIC_COMMAND = 0x90, + REG_UIC_COMMAND_ARG_1 = 0x94, + REG_UIC_COMMAND_ARG_2 = 0x98, + REG_UIC_COMMAND_ARG_3 = 0x9C, + + UFSHCI_REG_SPACE_SIZE = 0xA0, + + REG_UFS_CCAP = 0x100, + REG_UFS_CRYPTOCAP = 0x104, + + UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400, +}; + +/* Controller capability masks */ +enum { + MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, + MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, + MASK_AUTO_HIBERN8_SUPPORT = 0x00800000, + MASK_64_ADDRESSING_SUPPORT = 0x01000000, + MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, + MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, +}; + +/* Interrupt Status 20h */ +#define UTP_TRANSFER_REQ_COMPL 0x1 +#define UIC_DME_END_PT_RESET 0x2 +#define UIC_ERROR 0x4 +#define UIC_TEST_MODE 0x8 +#define UIC_POWER_MODE 0x10 +#define UIC_HIBERNATE_EXIT 0x20 +#define UIC_HIBERNATE_ENTER 0x40 +#define UIC_LINK_LOST 0x80 +#define UIC_LINK_STARTUP 0x100 +#define UTP_TASK_REQ_COMPL 0x200 +#define UIC_COMMAND_COMPL 0x400 +#define DEVICE_FATAL_ERROR 0x800 +#define CONTROLLER_FATAL_ERROR 0x10000 +#define SYSTEM_BUS_FATAL_ERROR 0x20000 + +#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\ + UIC_HIBERNATE_EXIT |\ + UIC_POWER_MODE) + +#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UIC_POWER_MODE) + +#define UFSHCD_ERROR_MASK (UIC_ERROR |\ + DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +/* Host Controller Enable 0x34h */ +#define CONTROLLER_ENABLE 0x1 +#define CONTROLLER_DISABLE 0x0 +/* HCS - Host Controller Status 30h */ +#define DEVICE_PRESENT 0x1 +#define UTP_TRANSFER_REQ_LIST_READY 0x2 +#define UTP_TASK_REQ_LIST_READY 0x4 +#define UIC_COMMAND_READY 0x8 +#define HOST_ERROR_INDICATOR 0x10 +#define DEVICE_ERROR_INDICATOR 0x20 +#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) + +#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\ + UTP_TASK_REQ_LIST_READY |\ + UIC_COMMAND_READY) + +enum { + PWR_OK = 0x0, + PWR_LOCAL = 0x01, + PWR_REMOTE = 0x02, + PWR_BUSY = 0x03, + PWR_ERROR_CAP = 0x04, + PWR_FATAL_ERROR = 0x05, +}; + +/* UICCMD - UIC Command */ +#define COMMAND_OPCODE_MASK 0xFF +#define GEN_SELECTOR_INDEX_MASK 0xFFFF + +#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) +#define RESET_LEVEL 0xFF + +#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) +#define CONFIG_RESULT_CODE_MASK 0xFF +#define GENERIC_ERROR_CODE_MASK 0xFF + +#define ufshcd_writel(hba, val, reg) \ + writel((val), (hba)->mmio_base + (reg)) +#define ufshcd_readl(hba, reg) \ + readl((hba)->mmio_base + (reg)) + +/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ +#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1 + +/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ +#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1 + +int ufshcd_probe(struct udevice *dev, struct ufs_hba_ops *hba_ops); + +#endif diff --git a/drivers/ufs/unipro.h b/drivers/ufs/unipro.h new file mode 100644 index 0000000000..b30b17fa5a --- /dev/null +++ b/drivers/ufs/unipro.h @@ -0,0 +1,270 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef _UNIPRO_H_ +#define _UNIPRO_H_ + +/* + * M-TX Configuration Attributes + */ +#define TX_HIBERN8TIME_CAPABILITY 0x000F +#define TX_MODE 0x0021 +#define TX_HSRATE_SERIES 0x0022 +#define TX_HSGEAR 0x0023 +#define TX_PWMGEAR 0x0024 +#define TX_AMPLITUDE 0x0025 +#define TX_HS_SLEWRATE 0x0026 +#define TX_SYNC_SOURCE 0x0027 +#define TX_HS_SYNC_LENGTH 0x0028 +#define TX_HS_PREPARE_LENGTH 0x0029 +#define TX_LS_PREPARE_LENGTH 0x002A +#define TX_HIBERN8_CONTROL 0x002B +#define TX_LCC_ENABLE 0x002C +#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D +#define TX_BYPASS_8B10B_ENABLE 0x002E +#define TX_DRIVER_POLARITY 0x002F +#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030 +#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031 +#define TX_LCC_SEQUENCER 0x0032 +#define TX_MIN_ACTIVATETIME 0x0033 +#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034 +#define TX_REFCLKFREQ 0x00EB +#define TX_CFGCLKFREQVAL 0x00EC +#define CFGEXTRATTR 0x00F0 +#define DITHERCTRL2 0x00F1 + +/* + * M-RX Configuration Attributes + */ +#define RX_MODE 0x00A1 +#define RX_HSRATE_SERIES 0x00A2 +#define RX_HSGEAR 0x00A3 +#define RX_PWMGEAR 0x00A4 +#define RX_LS_TERMINATED_ENABLE 0x00A5 +#define RX_HS_UNTERMINATED_ENABLE 0x00A6 +#define RX_ENTER_HIBERN8 0x00A7 +#define RX_BYPASS_8B10B_ENABLE 0x00A8 +#define RX_TERMINATION_FORCE_ENABLE 0x0089 +#define RX_MIN_ACTIVATETIME_CAPABILITY 0x008F +#define RX_HIBERN8TIME_CAPABILITY 0x0092 +#define RX_REFCLKFREQ 0x00EB +#define RX_CFGCLKFREQVAL 0x00EC +#define CFGWIDEINLN 0x00F0 +#define CFGRXCDR8 0x00BA +#define ENARXDIRECTCFG4 0x00F2 +#define CFGRXOVR8 0x00BD +#define RXDIRECTCTRL2 0x00C7 +#define ENARXDIRECTCFG3 0x00F3 +#define RXCALCTRL 0x00B4 +#define ENARXDIRECTCFG2 0x00F4 +#define CFGRXOVR4 0x00E9 +#define RXSQCTRL 0x00B5 +#define CFGRXOVR6 0x00BF + +#define is_mphy_tx_attr(attr) (attr < RX_MODE) +#define RX_MIN_ACTIVATETIME_UNIT_US 100 +#define HIBERN8TIME_UNIT_US 100 + +/* + * Common Block Attributes + */ +#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B) +#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF) +#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD) +#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6) +#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA) +#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0) +#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1) +#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3) +#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8) +#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB) + +#define UNIPRO_CB_OFFSET(x) (0x8000 | x) + +/* + * PHY Adpater attributes + */ +#define PA_ACTIVETXDATALANES 0x1560 +#define PA_ACTIVERXDATALANES 0x1580 +#define PA_TXTRAILINGCLOCKS 0x1564 +#define PA_PHY_TYPE 0x1500 +#define PA_AVAILTXDATALANES 0x1520 +#define PA_AVAILRXDATALANES 0x1540 +#define PA_MINRXTRAILINGCLOCKS 0x1543 +#define PA_TXPWRSTATUS 0x1567 +#define PA_RXPWRSTATUS 0x1582 +#define PA_TXFORCECLOCK 0x1562 +#define PA_TXPWRMODE 0x1563 +#define PA_LEGACYDPHYESCDL 0x1570 +#define PA_MAXTXSPEEDFAST 0x1521 +#define PA_MAXTXSPEEDSLOW 0x1522 +#define PA_MAXRXSPEEDFAST 0x1541 +#define PA_MAXRXSPEEDSLOW 0x1542 +#define PA_TXLINKSTARTUPHS 0x1544 +#define PA_LOCAL_TX_LCC_ENABLE 0x155E +#define PA_TXSPEEDFAST 0x1565 +#define PA_TXSPEEDSLOW 0x1566 +#define PA_REMOTEVERINFO 0x15A0 +#define PA_TXGEAR 0x1568 +#define PA_TXTERMINATION 0x1569 +#define PA_HSSERIES 0x156A +#define PA_PWRMODE 0x1571 +#define PA_RXGEAR 0x1583 +#define PA_RXTERMINATION 0x1584 +#define PA_MAXRXPWMGEAR 0x1586 +#define PA_MAXRXHSGEAR 0x1587 +#define PA_RXHSUNTERMCAP 0x15A5 +#define PA_RXLSTERMCAP 0x15A6 +#define PA_GRANULARITY 0x15AA +#define PA_PACPREQTIMEOUT 0x1590 +#define PA_PACPREQEOBTIMEOUT 0x1591 +#define PA_HIBERN8TIME 0x15A7 +#define PA_LOCALVERINFO 0x15A9 +#define PA_TACTIVATE 0x15A8 +#define PA_PACPFRAMECOUNT 0x15C0 +#define PA_PACPERRORCOUNT 0x15C1 +#define PA_PHYTESTCONTROL 0x15C2 +#define PA_PWRMODEUSERDATA0 0x15B0 +#define PA_PWRMODEUSERDATA1 0x15B1 +#define PA_PWRMODEUSERDATA2 0x15B2 +#define PA_PWRMODEUSERDATA3 0x15B3 +#define PA_PWRMODEUSERDATA4 0x15B4 +#define PA_PWRMODEUSERDATA5 0x15B5 +#define PA_PWRMODEUSERDATA6 0x15B6 +#define PA_PWRMODEUSERDATA7 0x15B7 +#define PA_PWRMODEUSERDATA8 0x15B8 +#define PA_PWRMODEUSERDATA9 0x15B9 +#define PA_PWRMODEUSERDATA10 0x15BA +#define PA_PWRMODEUSERDATA11 0x15BB +#define PA_CONNECTEDTXDATALANES 0x1561 +#define PA_CONNECTEDRXDATALANES 0x1581 +#define PA_LOGICALLANEMAP 0x15A1 +#define PA_SLEEPNOCONFIGTIME 0x15A2 +#define PA_STALLNOCONFIGTIME 0x15A3 +#define PA_SAVECONFIGTIME 0x15A4 + +#define PA_TACTIVATE_TIME_UNIT_US 10 +#define PA_HIBERN8_TIME_UNIT_US 100 + +/*Other attributes*/ +#define VS_MPHYCFGUPDT 0xD085 +#define VS_DEBUGOMC 0xD09E +#define VS_POWERSTATE 0xD083 + +#define PA_GRANULARITY_MIN_VAL 1 +#define PA_GRANULARITY_MAX_VAL 6 + +/* PHY Adapter Protocol Constants */ +#define PA_MAXDATALANES 4 + +/* PA power modes */ +enum { + FAST_MODE = 1, + SLOW_MODE = 2, + FASTAUTO_MODE = 4, + SLOWAUTO_MODE = 5, + UNCHANGED = 7, +}; + +/* PA TX/RX Frequency Series */ +enum { + PA_HS_MODE_A = 1, + PA_HS_MODE_B = 2, +}; + +enum ufs_pwm_gear_tag { + UFS_PWM_DONT_CHANGE, /* Don't change Gear */ + UFS_PWM_G1, /* PWM Gear 1 (default for reset) */ + UFS_PWM_G2, /* PWM Gear 2 */ + UFS_PWM_G3, /* PWM Gear 3 */ + UFS_PWM_G4, /* PWM Gear 4 */ + UFS_PWM_G5, /* PWM Gear 5 */ + UFS_PWM_G6, /* PWM Gear 6 */ + UFS_PWM_G7, /* PWM Gear 7 */ +}; + +enum ufs_hs_gear_tag { + UFS_HS_DONT_CHANGE, /* Don't change Gear */ + UFS_HS_G1, /* HS Gear 1 (default for reset) */ + UFS_HS_G2, /* HS Gear 2 */ + UFS_HS_G3, /* HS Gear 3 */ +}; + +enum ufs_unipro_ver { + UFS_UNIPRO_VER_RESERVED = 0, + UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */ + UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */ + UFS_UNIPRO_VER_1_6 = 3, /* UniPro version 1.6 */ + UFS_UNIPRO_VER_MAX = 4, /* UniPro unsupported version */ + /* UniPro version field mask in PA_LOCALVERINFO */ + UFS_UNIPRO_VER_MASK = 0xF, +}; + +/* + * Data Link Layer Attributes + */ +#define DL_TC0TXFCTHRESHOLD 0x2040 +#define DL_FC0PROTTIMEOUTVAL 0x2041 +#define DL_TC0REPLAYTIMEOUTVAL 0x2042 +#define DL_AFC0REQTIMEOUTVAL 0x2043 +#define DL_AFC0CREDITTHRESHOLD 0x2044 +#define DL_TC0OUTACKTHRESHOLD 0x2045 +#define DL_TC1TXFCTHRESHOLD 0x2060 +#define DL_FC1PROTTIMEOUTVAL 0x2061 +#define DL_TC1REPLAYTIMEOUTVAL 0x2062 +#define DL_AFC1REQTIMEOUTVAL 0x2063 +#define DL_AFC1CREDITTHRESHOLD 0x2064 +#define DL_TC1OUTACKTHRESHOLD 0x2065 +#define DL_TXPREEMPTIONCAP 0x2000 +#define DL_TC0TXMAXSDUSIZE 0x2001 +#define DL_TC0RXINITCREDITVAL 0x2002 +#define DL_TC0TXBUFFERSIZE 0x2005 +#define DL_PEERTC0PRESENT 0x2046 +#define DL_PEERTC0RXINITCREVAL 0x2047 +#define DL_TC1TXMAXSDUSIZE 0x2003 +#define DL_TC1RXINITCREDITVAL 0x2004 +#define DL_TC1TXBUFFERSIZE 0x2006 +#define DL_PEERTC1PRESENT 0x2066 +#define DL_PEERTC1RXINITCREVAL 0x2067 + +/* + * Network Layer Attributes + */ +#define N_DEVICEID 0x3000 +#define N_DEVICEID_VALID 0x3001 +#define N_TC0TXMAXSDUSIZE 0x3020 +#define N_TC1TXMAXSDUSIZE 0x3021 + +/* + * Transport Layer Attributes + */ +#define T_NUMCPORTS 0x4000 +#define T_NUMTESTFEATURES 0x4001 +#define T_CONNECTIONSTATE 0x4020 +#define T_PEERDEVICEID 0x4021 +#define T_PEERCPORTID 0x4022 +#define T_TRAFFICCLASS 0x4023 +#define T_PROTOCOLID 0x4024 +#define T_CPORTFLAGS 0x4025 +#define T_TXTOKENVALUE 0x4026 +#define T_RXTOKENVALUE 0x4027 +#define T_LOCALBUFFERSPACE 0x4028 +#define T_PEERBUFFERSPACE 0x4029 +#define T_CREDITSTOSEND 0x402A +#define T_CPORTMODE 0x402B +#define T_TC0TXMAXSDUSIZE 0x4060 +#define T_TC1TXMAXSDUSIZE 0x4061 + +#ifdef FALSE +#undef FALSE +#endif + +#ifdef TRUE +#undef TRUE +#endif + +/* Boolean attribute values */ +enum { + FALSE = 0, + TRUE, +}; + +#endif /* _UNIPRO_H_ */ diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index dbe226b46d..639d87a4e5 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -13,6 +13,7 @@ #include <config_distro_bootcmd.h> #include <environment/ti/mmc.h> #include <environment/ti/k3_rproc.h> +#include <environment/ti/ufs.h> #define CONFIG_ENV_SIZE (128 << 10) @@ -56,6 +57,9 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_CQSPI_REF_CLK 133333333 +/* HyperFlash related configuration */ +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 + /* U-Boot general configuration */ #define EXTRA_ENV_J721E_BOARD_SETTINGS \ "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ @@ -103,7 +107,8 @@ DEFAULT_MMC_TI_ARGS \ EXTRA_ENV_J721E_BOARD_SETTINGS \ EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ - EXTRA_ENV_RPROC_SETTINGS + EXTRA_ENV_RPROC_SETTINGS \ + DEFAULT_UFS_TI_ARGS /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index b6c9f2c8dd..274cc19112 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -227,8 +227,6 @@ /* Boot FreeBSD/vxWorks from an ELF image */ #define CONFIG_SYS_MMC_MAX_DEVICE 1 -#undef CONFIG_BOOTM_NETBSD - /* MMC support */ #ifdef CONFIG_MMC_SDHCI_ZYNQ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index f7f323752c..0c563d898b 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -102,6 +102,7 @@ enum uclass_id { UCLASS_THERMAL, /* Thermal sensor */ UCLASS_TIMER, /* Timer device */ UCLASS_TPM, /* Trusted Platform Module TIS interface */ + UCLASS_UFS, /* Universal Flash Storage */ UCLASS_USB, /* USB bus */ UCLASS_USB_DEV_GENERIC, /* USB generic device */ UCLASS_USB_HUB, /* USB hub */ diff --git a/include/dt-bindings/clock/xlnx-zynqmp-clk.h b/include/dt-bindings/clock/xlnx-zynqmp-clk.h new file mode 100644 index 0000000000..cdc4c0b9a3 --- /dev/null +++ b/include/dt-bindings/clock/xlnx-zynqmp-clk.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Xilinx Zynq MPSoC Firmware layer + * + * Copyright (C) 2014-2018 Xilinx, Inc. + * + */ + +#ifndef _DT_BINDINGS_CLK_ZYNQMP_H +#define _DT_BINDINGS_CLK_ZYNQMP_H + +#define IOPLL 0 +#define RPLL 1 +#define APLL 2 +#define DPLL 3 +#define VPLL 4 +#define IOPLL_TO_FPD 5 +#define RPLL_TO_FPD 6 +#define APLL_TO_LPD 7 +#define DPLL_TO_LPD 8 +#define VPLL_TO_LPD 9 +#define ACPU 10 +#define ACPU_HALF 11 +#define DBF_FPD 12 +#define DBF_LPD 13 +#define DBG_TRACE 14 +#define DBG_TSTMP 15 +#define DP_VIDEO_REF 16 +#define DP_AUDIO_REF 17 +#define DP_STC_REF 18 +#define GDMA_REF 19 +#define DPDMA_REF 20 +#define DDR_REF 21 +#define SATA_REF 22 +#define PCIE_REF 23 +#define GPU_REF 24 +#define GPU_PP0_REF 25 +#define GPU_PP1_REF 26 +#define TOPSW_MAIN 27 +#define TOPSW_LSBUS 28 +#define GTGREF0_REF 29 +#define LPD_SWITCH 30 +#define LPD_LSBUS 31 +#define USB0_BUS_REF 32 +#define USB1_BUS_REF 33 +#define USB3_DUAL_REF 34 +#define USB0 35 +#define USB1 36 +#define CPU_R5 37 +#define CPU_R5_CORE 38 +#define CSU_SPB 39 +#define CSU_PLL 40 +#define PCAP 41 +#define IOU_SWITCH 42 +#define GEM_TSU_REF 43 +#define GEM_TSU 44 +#define GEM0_TX 45 +#define GEM1_TX 46 +#define GEM2_TX 47 +#define GEM3_TX 48 +#define GEM0_RX 49 +#define GEM1_RX 50 +#define GEM2_RX 51 +#define GEM3_RX 52 +#define QSPI_REF 53 +#define SDIO0_REF 54 +#define SDIO1_REF 55 +#define UART0_REF 56 +#define UART1_REF 57 +#define SPI0_REF 58 +#define SPI1_REF 59 +#define NAND_REF 60 +#define I2C0_REF 61 +#define I2C1_REF 62 +#define CAN0_REF 63 +#define CAN1_REF 64 +#define CAN0 65 +#define CAN1 66 +#define DLL_REF 67 +#define ADMA_REF 68 +#define TIMESTAMP_REF 69 +#define AMS_REF 70 +#define PL0_REF 71 +#define PL1_REF 72 +#define PL2_REF 73 +#define PL3_REF 74 +#define WDT 75 +#define IOPLL_INT 76 +#define IOPLL_PRE_SRC 77 +#define IOPLL_HALF 78 +#define IOPLL_INT_MUX 79 +#define IOPLL_POST_SRC 80 +#define RPLL_INT 81 +#define RPLL_PRE_SRC 82 +#define RPLL_HALF 83 +#define RPLL_INT_MUX 84 +#define RPLL_POST_SRC 85 +#define APLL_INT 86 +#define APLL_PRE_SRC 87 +#define APLL_HALF 88 +#define APLL_INT_MUX 89 +#define APLL_POST_SRC 90 +#define DPLL_INT 91 +#define DPLL_PRE_SRC 92 +#define DPLL_HALF 93 +#define DPLL_INT_MUX 94 +#define DPLL_POST_SRC 95 +#define VPLL_INT 96 +#define VPLL_PRE_SRC 97 +#define VPLL_HALF 98 +#define VPLL_INT_MUX 99 +#define VPLL_POST_SRC 100 +#define CAN0_MIO 101 +#define CAN1_MIO 102 +#define ACPU_FULL 103 +#define GEM0_REF 104 +#define GEM1_REF 105 +#define GEM2_REF 106 +#define GEM3_REF 107 +#define GEM0_REF_UNG 108 +#define GEM1_REF_UNG 109 +#define GEM2_REF_UNG 110 +#define GEM3_REF_UNG 111 +#define LPD_WDT 112 + +#endif diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h new file mode 100644 index 0000000000..0d9a412fd5 --- /dev/null +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_POWER_H +#define _DT_BINDINGS_ZYNQMP_POWER_H + +#define PD_USB_0 22 +#define PD_USB_1 23 +#define PD_TTC_0 24 +#define PD_TTC_1 25 +#define PD_TTC_2 26 +#define PD_TTC_3 27 +#define PD_SATA 28 +#define PD_ETH_0 29 +#define PD_ETH_1 30 +#define PD_ETH_2 31 +#define PD_ETH_3 32 +#define PD_UART_0 33 +#define PD_UART_1 34 +#define PD_SPI_0 35 +#define PD_SPI_1 36 +#define PD_I2C_0 37 +#define PD_I2C_1 38 +#define PD_SD_0 39 +#define PD_SD_1 40 +#define PD_DP 41 +#define PD_GDMA 42 +#define PD_ADMA 43 +#define PD_NAND 44 +#define PD_QSPI 45 +#define PD_GPIO 46 +#define PD_CAN_0 47 +#define PD_CAN_1 48 +#define PD_GPU 58 +#define PD_PCIE 59 + +#endif diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h new file mode 100644 index 0000000000..d44525b9f8 --- /dev/null +++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H +#define _DT_BINDINGS_ZYNQMP_RESETS_H + +#define ZYNQMP_RESET_PCIE_CFG 0 +#define ZYNQMP_RESET_PCIE_BRIDGE 1 +#define ZYNQMP_RESET_PCIE_CTRL 2 +#define ZYNQMP_RESET_DP 3 +#define ZYNQMP_RESET_SWDT_CRF 4 +#define ZYNQMP_RESET_AFI_FM5 5 +#define ZYNQMP_RESET_AFI_FM4 6 +#define ZYNQMP_RESET_AFI_FM3 7 +#define ZYNQMP_RESET_AFI_FM2 8 +#define ZYNQMP_RESET_AFI_FM1 9 +#define ZYNQMP_RESET_AFI_FM0 10 +#define ZYNQMP_RESET_GDMA 11 +#define ZYNQMP_RESET_GPU_PP1 12 +#define ZYNQMP_RESET_GPU_PP0 13 +#define ZYNQMP_RESET_GPU 14 +#define ZYNQMP_RESET_GT 15 +#define ZYNQMP_RESET_SATA 16 +#define ZYNQMP_RESET_ACPU3_PWRON 17 +#define ZYNQMP_RESET_ACPU2_PWRON 18 +#define ZYNQMP_RESET_ACPU1_PWRON 19 +#define ZYNQMP_RESET_ACPU0_PWRON 20 +#define ZYNQMP_RESET_APU_L2 21 +#define ZYNQMP_RESET_ACPU3 22 +#define ZYNQMP_RESET_ACPU2 23 +#define ZYNQMP_RESET_ACPU1 24 +#define ZYNQMP_RESET_ACPU0 25 +#define ZYNQMP_RESET_DDR 26 +#define ZYNQMP_RESET_APM_FPD 27 +#define ZYNQMP_RESET_SOFT 28 +#define ZYNQMP_RESET_GEM0 29 +#define ZYNQMP_RESET_GEM1 30 +#define ZYNQMP_RESET_GEM2 31 +#define ZYNQMP_RESET_GEM3 32 +#define ZYNQMP_RESET_QSPI 33 +#define ZYNQMP_RESET_UART0 34 +#define ZYNQMP_RESET_UART1 35 +#define ZYNQMP_RESET_SPI0 36 +#define ZYNQMP_RESET_SPI1 37 +#define ZYNQMP_RESET_SDIO0 38 +#define ZYNQMP_RESET_SDIO1 39 +#define ZYNQMP_RESET_CAN0 40 +#define ZYNQMP_RESET_CAN1 41 +#define ZYNQMP_RESET_I2C0 42 +#define ZYNQMP_RESET_I2C1 43 +#define ZYNQMP_RESET_TTC0 44 +#define ZYNQMP_RESET_TTC1 45 +#define ZYNQMP_RESET_TTC2 46 +#define ZYNQMP_RESET_TTC3 47 +#define ZYNQMP_RESET_SWDT_CRL 48 +#define ZYNQMP_RESET_NAND 49 +#define ZYNQMP_RESET_ADMA 50 +#define ZYNQMP_RESET_GPIO 51 +#define ZYNQMP_RESET_IOU_CC 52 +#define ZYNQMP_RESET_TIMESTAMP 53 +#define ZYNQMP_RESET_RPU_R50 54 +#define ZYNQMP_RESET_RPU_R51 55 +#define ZYNQMP_RESET_RPU_AMBA 56 +#define ZYNQMP_RESET_OCM 57 +#define ZYNQMP_RESET_RPU_PGE 58 +#define ZYNQMP_RESET_USB0_CORERESET 59 +#define ZYNQMP_RESET_USB1_CORERESET 60 +#define ZYNQMP_RESET_USB0_HIBERRESET 61 +#define ZYNQMP_RESET_USB1_HIBERRESET 62 +#define ZYNQMP_RESET_USB0_APB 63 +#define ZYNQMP_RESET_USB1_APB 64 +#define ZYNQMP_RESET_IPI 65 +#define ZYNQMP_RESET_APM_LPD 66 +#define ZYNQMP_RESET_RTC 67 +#define ZYNQMP_RESET_SYSMON 68 +#define ZYNQMP_RESET_AFI_FM6 69 +#define ZYNQMP_RESET_LPD_SWDT 70 +#define ZYNQMP_RESET_FPD 71 +#define ZYNQMP_RESET_RPU_DBG1 72 +#define ZYNQMP_RESET_RPU_DBG0 73 +#define ZYNQMP_RESET_DBG_LPD 74 +#define ZYNQMP_RESET_DBG_FPD 75 +#define ZYNQMP_RESET_APLL 76 +#define ZYNQMP_RESET_DPLL 77 +#define ZYNQMP_RESET_VPLL 78 +#define ZYNQMP_RESET_IOPLL 79 +#define ZYNQMP_RESET_RPLL 80 +#define ZYNQMP_RESET_GPO3_PL_0 81 +#define ZYNQMP_RESET_GPO3_PL_1 82 +#define ZYNQMP_RESET_GPO3_PL_2 83 +#define ZYNQMP_RESET_GPO3_PL_3 84 +#define ZYNQMP_RESET_GPO3_PL_4 85 +#define ZYNQMP_RESET_GPO3_PL_5 86 +#define ZYNQMP_RESET_GPO3_PL_6 87 +#define ZYNQMP_RESET_GPO3_PL_7 88 +#define ZYNQMP_RESET_GPO3_PL_8 89 +#define ZYNQMP_RESET_GPO3_PL_9 90 +#define ZYNQMP_RESET_GPO3_PL_10 91 +#define ZYNQMP_RESET_GPO3_PL_11 92 +#define ZYNQMP_RESET_GPO3_PL_12 93 +#define ZYNQMP_RESET_GPO3_PL_13 94 +#define ZYNQMP_RESET_GPO3_PL_14 95 +#define ZYNQMP_RESET_GPO3_PL_15 96 +#define ZYNQMP_RESET_GPO3_PL_16 97 +#define ZYNQMP_RESET_GPO3_PL_17 98 +#define ZYNQMP_RESET_GPO3_PL_18 99 +#define ZYNQMP_RESET_GPO3_PL_19 100 +#define ZYNQMP_RESET_GPO3_PL_20 101 +#define ZYNQMP_RESET_GPO3_PL_21 102 +#define ZYNQMP_RESET_GPO3_PL_22 103 +#define ZYNQMP_RESET_GPO3_PL_23 104 +#define ZYNQMP_RESET_GPO3_PL_24 105 +#define ZYNQMP_RESET_GPO3_PL_25 106 +#define ZYNQMP_RESET_GPO3_PL_26 107 +#define ZYNQMP_RESET_GPO3_PL_27 108 +#define ZYNQMP_RESET_GPO3_PL_28 109 +#define ZYNQMP_RESET_GPO3_PL_29 110 +#define ZYNQMP_RESET_GPO3_PL_30 111 +#define ZYNQMP_RESET_GPO3_PL_31 112 +#define ZYNQMP_RESET_RPU_LS 113 +#define ZYNQMP_RESET_PS_ONLY 114 +#define ZYNQMP_RESET_PL 115 +#define ZYNQMP_RESET_PS_PL0 116 +#define ZYNQMP_RESET_PS_PL1 117 +#define ZYNQMP_RESET_PS_PL2 118 +#define ZYNQMP_RESET_PS_PL3 119 + +#endif diff --git a/include/environment/ti/ufs.h b/include/environment/ti/ufs.h new file mode 100644 index 0000000000..d457e20308 --- /dev/null +++ b/include/environment/ti/ufs.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + * + * Environment variable definitions for UFS on TI boards. + */ + +#ifndef __TI_UFS_H +#define __TI_UFS_H + +#define DEFAULT_UFS_TI_ARGS \ + "scsirootfstype=ext4 rootwait\0" \ + "ufs_finduuid=part uuid scsi ${bootpart} uuid\0" \ + "args_ufs=setenv devtype scsi;setenv bootpart 1:1;" \ + "run ufs_finduuid;setenv bootargs console = ${console} " \ + "${optargs}" \ + "root=PARTUUID=${uuid} rw " \ + "rootfstype=${scsirootfstype};" \ + "setenv devtype scsi;" \ + "setenv bootpart 1:1\0" \ + "init_ufs=ufs init; scsi scan; run args_ufs\0" \ + "get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}\0" \ + "get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "get_overlay_ufs=" \ + "fdt address ${fdtaddr};" \ + "fdt resize 0x100000;" \ + "for overlay in $name_overlays;" \ + "do;" \ + "load scsi ${bootpart} ${overlayaddr} ${bootdir}/${overlay} && " \ + "fdt apply ${overlayaddr};" \ + "done;\0" + +#endif diff --git a/include/scsi.h b/include/scsi.h index 81ab43c842..61da958bf6 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -6,6 +6,8 @@ #ifndef _SCSI_H #define _SCSI_H +#include <linux/dma-direction.h> + struct scsi_cmd { unsigned char cmd[16]; /* command */ /* for request sense */ @@ -26,6 +28,7 @@ struct scsi_cmd { unsigned long trans_bytes; /* tranfered bytes */ unsigned int priv; + enum dma_data_direction dma_dir; }; /*----------------------------------------------------------- @@ -163,11 +166,13 @@ struct scsi_cmd { * @base: Controller base address * @max_lun: Maximum number of logical units * @max_id: Maximum number of target ids + * @max_bytes_per_req: Maximum number of bytes per read/write request */ struct scsi_platdata { unsigned long base; unsigned long max_lun; unsigned long max_id; + unsigned long max_bytes_per_req; }; /* Operations for SCSI */ diff --git a/include/ufs.h b/include/ufs.h new file mode 100644 index 0000000000..0592a763dd --- /dev/null +++ b/include/ufs.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef _UFS_H +#define _UFS_H +/** + * ufs_probe() - initialize all devices in the UFS uclass + * + * @return 0 if Ok, -ve on error + */ +int ufs_probe(void); + +/** + * ufs_probe_dev() - initialize a particular device in the UFS uclass + * + * @index: index in the uclass sequence + * + * @return 0 if successfully probed, -ve on error + */ +int ufs_probe_dev(int index); + +/* + * ufs_scsi_bind() - Create a new scsi device as a child of the UFS device and + * bind it to the ufs_scsi driver + * @ufs_dev: UFS device + * @scsi_devp: Pointer to scsi device + * + * @return 0 if Ok, -ve on error + */ +int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp); +#endif diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h index a20cbcdb86..93d771ece2 100644 --- a/include/zynqmp_firmware.h +++ b/include/zynqmp_firmware.h @@ -11,12 +11,58 @@ enum pm_api_id { PM_GET_API_VERSION = 1, PM_SET_CONFIGURATION, - PM_SECURE_IMAGE = 45, + PM_GET_NODE_STATUS, + PM_GET_OPERATING_CHARACTERISTIC, + PM_REGISTER_NOTIFIER, + PM_REQUEST_SUSPEND, + PM_SELF_SUSPEND, + PM_FORCE_POWERDOWN, + PM_ABORT_SUSPEND, + PM_REQUEST_WAKEUP, + PM_SET_WAKEUP_SOURCE, + PM_SYSTEM_SHUTDOWN, + PM_REQUEST_NODE, + PM_RELEASE_NODE, + PM_SET_REQUIREMENT, + PM_SET_MAX_LATENCY, + PM_RESET_ASSERT, + PM_RESET_GET_STATUS, + PM_MMIO_WRITE, + PM_MMIO_READ, + PM_PM_INIT_FINALIZE, + PM_FPGA_LOAD, + PM_FPGA_GET_STATUS, + PM_GET_CHIPID, + PM_SECURE_SHA = 26, + PM_SECURE_RSA, + PM_PINCTRL_REQUEST, + PM_PINCTRL_RELEASE, + PM_PINCTRL_GET_FUNCTION, + PM_PINCTRL_SET_FUNCTION, + PM_PINCTRL_CONFIG_PARAM_GET, + PM_PINCTRL_CONFIG_PARAM_SET, + PM_IOCTL, + PM_QUERY_DATA, + PM_CLOCK_ENABLE, + PM_CLOCK_DISABLE, + PM_CLOCK_GETSTATE, + PM_CLOCK_SETDIVIDER, + PM_CLOCK_GETDIVIDER, + PM_CLOCK_SETRATE, + PM_CLOCK_GETRATE, + PM_CLOCK_SETPARENT, + PM_CLOCK_GETPARENT, + PM_SECURE_IMAGE, + PM_FPGA_READ = 46, + PM_SECURE_AES, + PM_CLOCK_PLL_GETPARAM = 49, + PM_REGISTER_ACCESS = 52, + PM_EFUSE_ACCESS, + PM_FEATURE_CHECK = 63, + PM_API_MAX, }; #define PM_SIP_SVC 0xc2000000 -#define ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD \ - (PM_SIP_SVC + PM_SECURE_IMAGE) #define ZYNQMP_PM_VERSION_MAJOR 1 #define ZYNQMP_PM_VERSION_MINOR 0 @@ -33,5 +79,7 @@ enum pm_api_id { unsigned int zynqmp_firmware_version(void); void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); +int xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, + u32 arg3, u32 *ret_payload); #endif /* _ZYNQMP_FIRMWARE_H_ */ diff --git a/tools/zynqmp_psu_init_minimize.sh b/tools/zynqmp_psu_init_minimize.sh index 384bb56e1a..4ee418f07e 100755 --- a/tools/zynqmp_psu_init_minimize.sh +++ b/tools/zynqmp_psu_init_minimize.sh @@ -64,7 +64,6 @@ psu_..._protection psu_init_xppu_aper_ram mask_delay(u32 mask_read(u32 -dpll_prog mask_poll(u32 mask_pollonvalue(u32 psu_ps_pl_reset_config_data |