diff options
| -rwxr-xr-x | arch/arm/mach-rockchip/make_fit_atf.py | 153 |
1 files changed, 64 insertions, 89 deletions
diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py index d1faff1957..212bd0a854 100755 --- a/arch/arm/mach-rockchip/make_fit_atf.py +++ b/arch/arm/mach-rockchip/make_fit_atf.py @@ -1,10 +1,12 @@ #!/usr/bin/env python """ -A script to generate FIT image source for rockchip boards -with ARM Trusted Firmware -and multiple device trees (given on the command line) - -usage: $0 <dt_name> [<dt_name> [<dt_name] ...] +# SPDX-License-Identifier: GPL-2.0+ +# +# A script to generate FIT image source for rockchip boards +# with ARM Trusted Firmware +# and multiple device trees (given on the command line) +# +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...] """ import os @@ -14,26 +16,27 @@ import getopt # pip install pyelftools from elftools.elf.elffile import ELFFile -ELF_SEG_P_TYPE='p_type' -ELF_SEG_P_PADDR='p_paddr' -ELF_SEG_P_VADDR='p_vaddr' -ELF_SEG_P_OFFSET='p_offset' -ELF_SEG_P_FILESZ='p_filesz' -ELF_SEG_P_MEMSZ='p_memsz' +ELF_SEG_P_TYPE = 'p_type' +ELF_SEG_P_PADDR = 'p_paddr' +ELF_SEG_P_VADDR = 'p_vaddr' +ELF_SEG_P_OFFSET = 'p_offset' +ELF_SEG_P_FILESZ = 'p_filesz' +ELF_SEG_P_MEMSZ = 'p_memsz' -DT_HEADER="""// SPDX-License-Identifier: GPL-2.0+ OR X11 +DT_HEADER = """ /* - * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * Minimal dts for a SPL FIT image payload. + * This is a generated file. */ /dts-v1/; / { - description = "Configuration to load ATF before U-Boot"; + description = "FIT image for U-Boot with bl31 (TF-A)"; #address-cells = <1>; images { +""" + +DT_UBOOT = """ uboot { description = "U-Boot (64-bit)"; data = /incbin/("u-boot-nodtb.bin"); @@ -46,18 +49,14 @@ DT_HEADER="""// SPDX-License-Identifier: GPL-2.0+ OR X11 """ -DT_IMAGES_NODE_END=""" - }; -""" +DT_IMAGES_NODE_END = """ }; -DT_END=""" -}; """ -def append_atf_node(file, atf_index, phy_addr, elf_entry): - """ - Append ATF DT node to input FIT dts file. - """ +DT_END = "};" + +def append_bl31_node(file, atf_index, phy_addr, elf_entry): + # Append BL31 DT node to input FIT dts file. data = 'bl31_0x%08x.bin' % phy_addr file.write('\t\tatf_%d {\n' % atf_index) file.write('\t\t\tdescription = \"ARM Trusted Firmware\";\n') @@ -73,9 +72,7 @@ def append_atf_node(file, atf_index, phy_addr, elf_entry): file.write('\n') def append_fdt_node(file, dtbs): - """ - Append FDT nodes. - """ + # Append FDT nodes. cnt = 1 for dtb in dtbs: dtname = os.path.basename(dtb) @@ -88,14 +85,14 @@ def append_fdt_node(file, dtbs): file.write('\n') cnt = cnt + 1 -def append_conf_section(file, cnt, dtname, atf_cnt): +def append_conf_section(file, cnt, dtname, segments): file.write('\t\tconfig_%d {\n' % cnt) file.write('\t\t\tdescription = "%s";\n' % dtname) file.write('\t\t\tfirmware = "atf_1";\n') file.write('\t\t\tloadables = "uboot",') - for i in range(1, atf_cnt): - file.write('"atf_%d"' % (i+1)) - if i != (atf_cnt - 1): + for i in range(1, segments): + file.write('"atf_%d"' % (i)) + if i != (segments - 1): file.write(',') else: file.write(';\n') @@ -103,57 +100,58 @@ def append_conf_section(file, cnt, dtname, atf_cnt): file.write('\t\t};\n') file.write('\n') -def append_conf_node(file, dtbs, atf_cnt): - """ - Append configeration nodes. - """ +def append_conf_node(file, dtbs, segments): + # Append configeration nodes. cnt = 1 file.write('\tconfigurations {\n') file.write('\t\tdefault = "config_1";\n') for dtb in dtbs: dtname = os.path.basename(dtb) - append_conf_section(file, cnt, dtname, atf_cnt) + append_conf_section(file, cnt, dtname, segments) cnt = cnt + 1 file.write('\t};\n') file.write('\n') -def generate_atf_fit_dts(fit_file_name, bl31_file_name, uboot_file_name, dtbs_file_name): - """ - Generate FIT script for ATF image. - """ - if fit_file_name != sys.stdout: - fit_file = open(fit_file_name, "wb") - else: - fit_file = sys.stdout - +def generate_atf_fit_dts_uboot(fit_file, uboot_file_name): num_load_seg = 0 p_paddr = 0xFFFFFFFF with open(uboot_file_name, 'rb') as uboot_file: uboot = ELFFile(uboot_file) for i in range(uboot.num_segments()): seg = uboot.get_segment(i) - if ('PT_LOAD' == seg.__getitem__(ELF_SEG_P_TYPE)): + if seg.__getitem__(ELF_SEG_P_TYPE) == 'PT_LOAD': p_paddr = seg.__getitem__(ELF_SEG_P_PADDR) num_load_seg = num_load_seg + 1 assert (p_paddr != 0xFFFFFFFF and num_load_seg == 1) - fit_file.write(DT_HEADER % p_paddr) + fit_file.write(DT_UBOOT % p_paddr) +def generate_atf_fit_dts_bl31(fit_file, bl31_file_name, dtbs_file_name): with open(bl31_file_name, 'rb') as bl31_file: bl31 = ELFFile(bl31_file) elf_entry = bl31.header['e_entry'] - for i in range(bl31.num_segments()): + segments = bl31.num_segments() + for i in range(segments): seg = bl31.get_segment(i) - if ('PT_LOAD' == seg.__getitem__(ELF_SEG_P_TYPE)): + if seg.__getitem__(ELF_SEG_P_TYPE) == 'PT_LOAD': paddr = seg.__getitem__(ELF_SEG_P_PADDR) - p= seg.__getitem__(ELF_SEG_P_PADDR) - append_atf_node(fit_file, i+1, paddr, elf_entry) - atf_cnt = i+1 + append_bl31_node(fit_file, i + 1, paddr, elf_entry) append_fdt_node(fit_file, dtbs_file_name) - fit_file.write('%s\n' % DT_IMAGES_NODE_END) - append_conf_node(fit_file, dtbs_file_name, atf_cnt) - fit_file.write('%s\n' % DT_END) + fit_file.write(DT_IMAGES_NODE_END) + append_conf_node(fit_file, dtbs_file_name, segments) + +def generate_atf_fit_dts(fit_file_name, bl31_file_name, uboot_file_name, dtbs_file_name): + # Generate FIT script for ATF image. + if fit_file_name != sys.stdout: + fit_file = open(fit_file_name, "wb") + else: + fit_file = sys.stdout + + fit_file.write(DT_HEADER) + generate_atf_fit_dts_uboot(fit_file, uboot_file_name) + generate_atf_fit_dts_bl31(fit_file, bl31_file_name, dtbs_file_name) + fit_file.write(DT_END) if fit_file_name != sys.stdout: fit_file.close() @@ -165,56 +163,33 @@ def generate_atf_binary(bl31_file_name): num = bl31.num_segments() for i in range(num): seg = bl31.get_segment(i) - if ('PT_LOAD' == seg.__getitem__(ELF_SEG_P_TYPE)): + if seg.__getitem__(ELF_SEG_P_TYPE) == 'PT_LOAD': paddr = seg.__getitem__(ELF_SEG_P_PADDR) file_name = 'bl31_0x%08x.bin' % paddr with open(file_name, "wb") as atf: - atf.write(seg.data()); - -def get_bl31_segments_info(bl31_file_name): - """ - Get load offset, physical offset, file size - from bl31 elf file program headers. - """ - with open(bl31_file_name) as bl31_file: - bl31 = ELFFile(bl31_file) - - num = bl31.num_segments() - print('Number of Segments : %d' % bl31.num_segments()) - for i in range(num): - print('Segment %d' % i) - seg = bl31.get_segment(i) - ptype = seg[ELF_SEG_P_TYPE] - poffset = seg[ELF_SEG_P_OFFSET] - pmemsz = seg[ELF_SEG_P_MEMSZ] - pfilesz = seg[ELF_SEG_P_FILESZ] - print('type: %s\nfilesz: %08x\nmemsz: %08x\noffset: %08x' % (ptype, pfilesz, pmemsz, poffset)) - paddr = seg[ELF_SEG_P_PADDR] - print('paddr: %08x' % paddr) + atf.write(seg.data()) def main(): - uboot_elf="./u-boot" - bl31_elf="./bl31.elf" - FIT_ITS=sys.stdout + uboot_elf = "./u-boot" + bl31_elf = "./bl31.elf" + fit_its = sys.stdout opts, args = getopt.getopt(sys.argv[1:], "o:u:b:h") for opt, val in opts: if opt == "-o": - FIT_ITS=val + fit_its = val elif opt == "-u": - uboot_elf=val + uboot_elf = val elif opt == "-b": - bl31_elf=val + bl31_elf = val elif opt == "-h": print(__doc__) sys.exit(2) dtbs = args - #get_bl31_segments_info("u-boot") - #get_bl31_segments_info("bl31.elf") - generate_atf_fit_dts(FIT_ITS, bl31_elf, uboot_elf, dtbs) - generate_atf_binary(bl31_elf); + generate_atf_fit_dts(fit_its, bl31_elf, uboot_elf, dtbs) + generate_atf_binary(bl31_elf) if __name__ == "__main__": main() |