diff options
38 files changed, 2340 insertions, 1217 deletions
@@ -2,6 +2,18 @@ Changes since U-Boot 0.3.1: ====================================================================== +* Patches by David Müller, 12 Jun 2003: + - rewrite of the S3C24X0 register definitions stuff + - "driver" for the built-in S3C24X0 RTC + +* Patches by Yuli Barcohen, 12 Jun 2003: + - Add MII support and Ethernet PHY initialization for MPC8260ADS board + - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset + configuration word supplied by FPGA on some MPC8260ADS boards + +* Patch by Pantelis Antoniou, 10 Jun 2003: + Unify status LED interface + * Add support for DS12887 RTC; add RTC support for ATC board * Patch by Nicolas Lacressonniere, 11 Jun 2003: diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c index 2200a24ce7..d0ee921aec 100644 --- a/board/mpc8260ads/mpc8260ads.c +++ b/board/mpc8260ads/mpc8260ads.c @@ -9,6 +9,10 @@ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com * Added support for the 16M dram simm on the 8260ads boards * + * (C) Copyright 2003 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> + * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init. + * * See file CREDITS for list of people who contributed to this * project. * diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index aa2ba6f04c..503654e296 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -45,7 +45,11 @@ extern int gunzip (void *, int, unsigned char *, int *); extern int mem_test(unsigned long start, unsigned long ramsize, int quiet); #define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */ +#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) #define IMAGE_SIZE 0x80000 +#elif defined(CONFIG_VCMA9) +#define IMAGE_SIZE 0x40000 /* ugly, but it works for now */ +#endif extern flash_info_t flash_info[]; /* info for FLASH chips */ diff --git a/board/mpl/vcma9/config.mk b/board/mpl/vcma9/config.mk index 19ef18716f..95d69cc6cc 100644 --- a/board/mpl/vcma9/config.mk +++ b/board/mpl/vcma9/config.mk @@ -15,10 +15,10 @@ # Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 # optionally with a ramdisk at 3080'0000 # -# we load ourself to 33F0'0000 +# we load ourself to 33F8'0000 # # download area is 3300'0000 # -TEXT_BASE = 0x33F00000 +TEXT_BASE = 0x33F80000 diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/memsetup.S index 80721cde27..557e554f53 100644 --- a/board/mpl/vcma9/memsetup.S +++ b/board/mpl/vcma9/memsetup.S @@ -54,8 +54,10 @@ /* BANK0CON */ #define B0_Tacs 0x0 /* 0clk */ -#define B0_Tcos 0x0 /* 0clk */ -#define B0_Tacc 0x5 /* 8clk */ +#define B0_Tcos 0x1 /* 1clk */ +/*#define B0_Tcos 0x0 0clk */ +#define B0_Tacc 0x7 /* 14clk */ +/*#define B0_Tacc 0x5 8clk */ #define B0_Tcoh 0x0 /* 0clk */ #define B0_Tah 0x0 /* 0clk */ #define B0_Tacp 0x0 /* page mode is not used */ @@ -63,8 +65,10 @@ /* BANK1CON */ #define B1_Tacs 0x0 /* 0clk */ -#define B1_Tcos 0x0 /* 0clk */ -#define B1_Tacc 0x5 /* 8clk */ +#define B1_Tcos 0x1 /* 1clk */ +/*#define B1_Tcos 0x0 0clk */ +#define B1_Tacc 0x7 /* 14clk */ +/*#define B1_Tacc 0x5 8clk */ #define B1_Tcoh 0x0 /* 0clk */ #define B1_Tah 0x0 /* 0clk */ #define B1_Tacp 0x0 /* page mode is not used */ diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index 4743e6bace..b051bfeb07 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -72,41 +72,46 @@ static inline void delay(unsigned long loops) int board_init(void) { DECLARE_GLOBAL_DATA_PTR; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - rLOCKTIME = 0xFFFFFF; + clk_power->LOCKTIME = 0xFFFFFF; /* configure MPLL */ - rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - rGPACON = 0x007FFFFF; - rGPBCON = 0x002AAAAA; - rGPBUP = 0x000002BF; - rGPCCON = 0xAAAAAAAA; - rGPCUP = 0x0000FFFF; - rGPDCON = 0xAAAAAAAA; - rGPDUP = 0x0000FFFF; - rGPECON = 0xAAAAAAAA; - rGPEUP = 0x000037F7; - rGPFCON = 0x00000000; - rGPFUP = 0x00000000; - rGPGCON = 0xFFEAFF5A; - rGPGUP = 0x0000F0DC; - rGPHCON = 0x0028AAAA; - rGPHUP = 0x00000656; + gpio->GPACON = 0x007FFFFF; + gpio->GPBCON = 0x002AAAAA; + gpio->GPBUP = 0x000002BF; + gpio->GPCCON = 0xAAAAAAAA; + gpio->GPCUP = 0x0000FFFF; + gpio->GPDCON = 0xAAAAAAAA; + gpio->GPDUP = 0x0000FFFF; + gpio->GPECON = 0xAAAAAAAA; + gpio->GPEUP = 0x000037F7; + gpio->GPFCON = 0x00000000; + gpio->GPFUP = 0x00000000; + gpio->GPGCON = 0xFFEAFF5A; + gpio->GPGUP = 0x0000F0DC; + gpio->GPHCON = 0x0028AAAA; + gpio->GPHUP = 0x00000656; /* setup correct IRQ modes for NIC */ - rEXTINT2 = (rEXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */ + gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */ + + /* select USB port 2 to be host or device (fix to host for now) */ + gpio->MISCCR |= 0x08; /* init serial */ gd->baudrate = CONFIG_BAUDRATE; @@ -136,6 +141,50 @@ int dram_init(void) } /* + * NAND flash initialization. + */ +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +extern void +nand_probe(ulong physadr); + + +static inline void NF_Reset(void) +{ + int i; + + NF_SetCE(NFCE_LOW); + NF_Cmd(0xFF); /* reset command */ + for(i = 0; i < 10; i++); /* tWB = 100ns. */ + NF_WaitRB(); /* wait 200~500us; */ + NF_SetCE(NFCE_HIGH); +} + + +static inline void NF_Init(void) +{ +#define TACLS 0 +#define TWRPH0 3 +#define TWRPH1 0 + NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0)); + //nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); + // 1 1 1 1, 1 xxx, r xxx, r xxx + // En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 + + NF_Reset(); +} + +void +nand_init(void) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + NF_Init(); + printf("NAND flash probing at 0x%.8lX\n", (ulong)nand); + nand_probe((ulong)nand); +} +#endif + +/* * Get some Board/PLD Info */ @@ -195,12 +244,12 @@ int checkboard(void) puts ("### No HW ID - assuming VCMA9"); } else { b->serial_name[5] = 0; - printf ("%s-%d Rev %c SN: %s", b->serial_name, Get_Board_Config(), + printf ("%s-%d PCB Rev %c SN: %s", b->serial_name, Get_Board_Config(), Get_Board_PCB(), &b->serial_name[6]); } } else { s[5] = 0; - printf ("%s-%d Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(), + printf ("%s-%d PCB Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(), &s[6]); } printf("\n"); @@ -211,7 +260,7 @@ int checkboard(void) void print_vcma9_rev(void) { - printf("Board: VCMA9-%d Rev: %c (PLD Ver: %d, Rev: %d)\n", + printf("Board: VCMA9-%d PCB Rev: %c (PLD Ver: %d, Rev: %d)\n", Get_Board_Config(), Get_Board_PCB(), Get_PLD_Version(), Get_PLD_Revision()); } @@ -245,5 +294,3 @@ void print_vcma9_info(void) { print_vcma9_rev(); } - - diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h index bc0e3a460d..4299d4e817 100644 --- a/board/mpl/vcma9/vcma9.h +++ b/board/mpl/vcma9/vcma9.h @@ -25,11 +25,97 @@ * Global routines used for VCMA9 *****************************************************************************/ +#include <s3c2410.h> extern int mem_test(unsigned long start, unsigned long ramsize,int mode); void print_vcma9_info(void); +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +typedef enum { + NFCE_LOW, + NFCE_HIGH +} NFCE_STATE; + +static inline void NF_Conf(u16 conf) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + nand->NFCONF = conf; +} + +static inline void NF_Cmd(u8 cmd) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + nand->NFCMD = cmd; +} + +static inline void NF_CmdW(u8 cmd) +{ + NF_Cmd(cmd); + udelay(1); +} + +static inline void NF_Addr(u8 addr) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + nand->NFADDR = addr; +} + +static inline void NF_SetCE(NFCE_STATE s) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + switch (s) { + case NFCE_LOW: + nand->NFCONF &= ~(1<<11); + break; + + case NFCE_HIGH: + nand->NFCONF |= (1<<11); + break; + } +} + +static inline void NF_WaitRB(void) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + while (!(nand->NFSTAT & (1<<0))); +} + +static inline void NF_Write(u8 data) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + nand->NFDATA = data; +} + +static inline u8 NF_Read(void) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + return(nand->NFDATA); +} + +static inline void NF_Init_ECC(void) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + nand->NFCONF |= (1<<12); +} + +static inline u32 NF_Read_ECC(void) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + return(nand->NFECC); +} + +#endif + #define PLD_BASE_ADDRESS 0x2C000100 #define PLD_ID_REG (PLD_BASE_ADDRESS + 0) @@ -39,5 +125,3 @@ void print_vcma9_info(void); #define PLD_GPCD_REG (PLD_BASE_ADDRESS + 4) #define PLD_BOARD_REG (PLD_BASE_ADDRESS + 5) - - diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c index 2b61b2d8e5..2d6be31bef 100644 --- a/board/smdk2400/smdk2400.c +++ b/board/smdk2400/smdk2400.c @@ -46,33 +46,35 @@ extern int do_mdm_init; /* defined in common/main.c */ int board_init (void) { DECLARE_GLOBAL_DATA_PTR; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); /* memory and cpu-speed are setup before relocation */ /* change the clock to be 50 MHz 1:1:1 */ - rMPLLCON = 0x5c042; - rCLKDIVN = 0; + clk_power->MPLLCON = 0x5c042; + clk_power->CLKDIVN = 0; /* set up the I/O ports */ - rPACON = 0x3ffff; - rPBCON = 0xaaaaaaaa; - rPBUP = 0xffff; - rPECON = 0x0; - rPEUP = 0x0; + gpio->PACON = 0x3ffff; + gpio->PBCON = 0xaaaaaaaa; + gpio->PBUP = 0xffff; + gpio->PECON = 0x0; + gpio->PEUP = 0x0; #ifdef CONFIG_HWFLOW /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ /* 10, 10, 00, 00, 10, 00, 10 */ - rPFCON=0xa22; + gpio->PFCON=0xa22; /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - rPFUP=0x35; + gpio->PFUP=0x35; #else /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ /* 00, 00, 00, 00, 10, 00, 10 */ - rPFCON = 0x22; + gpio->PFCON = 0x22; /* Disable pull-up on Rx and Tx pins */ - rPFUP = 0x5; + gpio->PFUP = 0x5; #endif /* CONFIG_HWFLOW */ - rPGCON = 0x0; - rPGUP = 0x0; - rOPENCR = 0x0; + gpio->PGCON = 0x0; + gpio->PGUP = 0x0; + gpio->OPENCR = 0x0; /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ gd->bd->bi_arch_number = 145; diff --git a/board/smdk2410/config.mk b/board/smdk2410/config.mk index b06b493c79..1af85daa4c 100644 --- a/board/smdk2410/config.mk +++ b/board/smdk2410/config.mk @@ -16,10 +16,10 @@ # Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 # optionally with a ramdisk at 3080'0000 # -# we load ourself to 33F0'0000 +# we load ourself to 33F8'0000 # # download area is 3300'0000 # -TEXT_BASE = 0x33F00000 +TEXT_BASE = 0x33F80000 diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c index 7f983ef5b8..207cd448ff 100644 --- a/board/smdk2410/smdk2410.c +++ b/board/smdk2410/smdk2410.c @@ -68,38 +68,40 @@ static inline void delay (unsigned long loops) int board_init (void) { DECLARE_GLOBAL_DATA_PTR; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - rLOCKTIME = 0xFFFFFF; + clk_power->LOCKTIME = 0xFFFFFF; /* configure MPLL */ - rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - rGPACON = 0x007FFFFF; - rGPBCON = 0x00044555; - rGPBUP = 0x000007FF; - rGPCCON = 0xAAAAAAAA; - rGPCUP = 0x0000FFFF; - rGPDCON = 0xAAAAAAAA; - rGPDUP = 0x0000FFFF; - rGPECON = 0xAAAAAAAA; - rGPEUP = 0x0000FFFF; - rGPFCON = 0x000055AA; - rGPFUP = 0x000000FF; - rGPGCON = 0xFF95FFBA; - rGPGUP = 0x0000FFFF; - rGPHCON = 0x002AFAAA; - rGPHUP = 0x000007FF; + gpio->GPACON = 0x007FFFFF; + gpio->GPBCON = 0x00044555; + gpio->GPBUP = 0x000007FF; + gpio->GPCCON = 0xAAAAAAAA; + gpio->GPCUP = 0x0000FFFF; + gpio->GPDCON = 0xAAAAAAAA; + gpio->GPDUP = 0x0000FFFF; + gpio->GPECON = 0xAAAAAAAA; + gpio->GPEUP = 0x0000FFFF; + gpio->GPFCON = 0x000055AA; + gpio->GPFUP = 0x000000FF; + gpio->GPGCON = 0xFF95FFBA; + gpio->GPGUP = 0x0000FFFF; + gpio->GPHCON = 0x002AFAAA; + gpio->GPHUP = 0x000007FF; /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = 193; diff --git a/board/trab/trab.c b/board/trab/trab.c index 6c9971f3b6..dd4105d97d 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -71,37 +71,39 @@ int board_init () extern int vfd_init_clocks(void); #endif DECLARE_GLOBAL_DATA_PTR; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); /* memory and cpu-speed are setup before relocation */ #ifdef CONFIG_TRAB_50MHZ /* change the clock to be 50 MHz 1:1:1 */ /* MDIV:0x5c PDIV:4 SDIV:2 */ - rMPLLCON = 0x5c042; - rCLKDIVN = 0; + clk_power->MPLLCON = 0x5c042; + clk_power->CLKDIVN = 0; #else /* change the clock to be 133 MHz 1:2:4 */ /* MDIV:0x7d PDIV:4 SDIV:1 */ - rMPLLCON = 0x7d041; - rCLKDIVN = 3; + clk_power->MPLLCON = 0x7d041; + clk_power->CLKDIVN = 3; #endif /* set up the I/O ports */ - rPACON = 0x3ffff; - rPBCON = 0xaaaaaaaa; - rPBUP = 0xffff; + gpio->PACON = 0x3ffff; + gpio->PBCON = 0xaaaaaaaa; + gpio->PBUP = 0xffff; /* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */ /* 00, 10, 10, 10, 10, 10, 10 */ - rPFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); + gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); #ifdef CONFIG_HWFLOW /* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */ - rPFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); + gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); #else /* do not pull up RXD0, RXD1, TXD0, TXD1 */ - rPFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3); + gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3); #endif - rPGCON = 0x0; - rPGUP = 0x0; - rOPENCR= 0x0; + gpio->PGCON = 0x0; + gpio->PGUP = 0x0; + gpio->OPENCR= 0x0; /* arch number of SAMSUNG-Board */ /* MACH_TYPE_SMDK2400 */ @@ -112,8 +114,8 @@ int board_init () gd->bd->bi_boot_params = 0x0c000100; /* Make sure both buzzers are turned off */ - rPDCON |= 0x5400; - rPDDAT &= ~0xE0; + gpio->PDCON |= 0x5400; + gpio->PDDAT &= ~0xE0; #ifdef CONFIG_VFD vfd_init_clocks(); @@ -305,57 +307,73 @@ static int key_pressed(void) #ifdef CFG_BRIGHTNESS -#define SET_CS_TOUCH (rPDDAT &= 0x5FF) -#define CLR_CS_TOUCH (rPDDAT |= 0x200) +static inline void SET_CS_TOUCH(void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + gpio->PDDAT &= 0x5FF; +} + +static inline void CLR_CS_TOUCH(void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + gpio->PDDAT |= 0x200; +} static void spi_init(void) { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); int i; /* Configure I/O ports. */ - rPDCON = (rPDCON & 0xF3FFFF) | 0x040000; - rPGCON = (rPGCON & 0x0F3FFF) | 0x008000; - rPGCON = (rPGCON & 0x0CFFFF) | 0x020000; - rPGCON = (rPGCON & 0x03FFFF) | 0x080000; + gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; + gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; + gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; + gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; - CLR_CS_TOUCH; + CLR_CS_TOUCH(); - rSPPRE = 0x1F; /* Baudrate ca. 514kHz */ - rSPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ - rSPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ + spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */ + spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ /* Dummy byte ensures clock to be low. */ for (i = 0; i < 10; i++) { - rSPTDAT = 0xFF; + spi->ch[0].SPTDAT = 0xFF; } wait_transmit_done(); } static void wait_transmit_done(void) { - while (!(rSPSTA & 0x01)); /* wait until transfer is done */ + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + + while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ } static void tsc2000_write(unsigned int page, unsigned int reg, unsigned int data) { + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); unsigned int command; - SET_CS_TOUCH; + SET_CS_TOUCH(); command = 0x0000; command |= (page << 11); command |= (reg << 5); - rSPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; wait_transmit_done(); - rSPTDAT = (command & 0x00FF); + spi->ch[0].SPTDAT = (command & 0x00FF); wait_transmit_done(); - rSPTDAT = (data & 0xFF00) >> 8; + spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; wait_transmit_done(); - rSPTDAT = (data & 0x00FF); + spi->ch[0].SPTDAT = (data & 0x00FF); wait_transmit_done(); - CLR_CS_TOUCH; + CLR_CS_TOUCH(); } static void tsc2000_set_brightness(void) diff --git a/board/trab/vfd.c b/board/trab/vfd.c index e00294f0fe..1abc2adc65 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -359,14 +359,17 @@ void transfer_pic(int display, unsigned char *adr, int height, int width) */ int vfd_init_clocks (void) { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS(); + S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); /* try to determine display type from the value * defined by pull-ups */ - rPCUP = (rPCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */ - rPCCON = (rPCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */ + gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */ + gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */ udelay (10); /* allow signals to settle */ - vfd_board_id = (~rPCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ + vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ VFD_DISABLE; /* activate blank for the vfd */ @@ -377,39 +380,39 @@ int vfd_init_clocks (void) /* If new board revision, then use PWM 3 as cpld-clock */ /* Enable 500 Hz timer for fill level sensor to operate properly */ /* Configure TOUT3 as functional pin, disable pull-up */ - rPDCON &= ~0x30000; - rPDCON |= 0x20000; - rPDUP |= (1 << 8); + gpio->PDCON &= ~0x30000; + gpio->PDCON |= 0x20000; + gpio->PDUP |= (1 << 8); /* Configure the prescaler */ - rTCFG0 &= ~0xff00; - rTCFG0 |= 0x0f00; + timers->TCFG0 &= ~0xff00; + timers->TCFG0 |= 0x0f00; /* Select MUX input (divider) for timer3 (1/16) */ - rTCFG1 &= ~0xf000; - rTCFG1 |= 0x3000; + timers->TCFG1 &= ~0xf000; + timers->TCFG1 |= 0x3000; /* Enable autoreload and set the counter and compare * registers to values for the 500 Hz clock * (for a given prescaler (15) and divider (16)): * counter = (66000000 / 500) >> 9; */ - rTCNTB3 = 0x101; - rTCMPB3 = 0x101 / 2; + timers->ch[3].TCNTB = 0x101; + timers->ch[3].TCMPB = 0x101 / 2; /* Start timer */ - rTCON = (rTCON | UPDATE3 | RELOAD3) & ~INVERT3; - rTCON = (rTCON | START3) & ~UPDATE3; + timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3; + timers->TCON = (timers->TCON | START3) & ~UPDATE3; } #endif /* If old board revision, then use vm-signal as cpld-clock */ - rLCDCON2 = 0x00FFC000; - rLCDCON3 = 0x0007FF00; - rLCDCON4 = 0x00000000; - rLCDCON5 = 0x00000400; - rLCDCON1 = 0x00000B75; + lcd->LCDCON2 = 0x00FFC000; + lcd->LCDCON3 = 0x0007FF00; + lcd->LCDCON4 = 0x00000000; + lcd->LCDCON5 = 0x00000400; + lcd->LCDCON1 = 0x00000B75; /* VM (GPD1) is used as clock for the CPLD */ - rPDCON = (rPDCON & 0xFFFFFFF3) | 0x00000008; + gpio->PDCON = (gpio->PDCON & 0xFFFFFFF3) | 0x00000008; return 0; } @@ -425,6 +428,8 @@ int vfd_init_clocks (void) */ int drv_vfd_init(void) { + S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); char *tmp; ulong palette; static int vfd_init_done = 0; @@ -481,40 +486,40 @@ int drv_vfd_init(void) * see manual S3C2400 */ /* Stopp LCD-Controller */ - rLCDCON1 = 0x00000000; + lcd->LCDCON1 = 0x00000000; /* frame buffer startadr */ - rLCDSADDR1 = gd->fb_base >> 1; + lcd->LCDSADDR1 = gd->fb_base >> 1; /* frame buffer endadr */ - rLCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1; - rLCDSADDR3 = ((256/4)); -rLCDCON2 = 0x000DC000; + lcd->LCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1; + lcd->LCDSADDR3 = ((256/4)); + lcd->LCDCON2 = 0x000DC000; if(gd->vfd_type == VFD_TYPE_MN11236) - rLCDCON2 = 37 << 14; /* MN11236: 38 lines */ + lcd->LCDCON2 = 37 << 14; /* MN11236: 38 lines */ else - rLCDCON2 = 55 << 14; /* T119C: 56 lines */ - rLCDCON3 = 0x0051000A; - rLCDCON4 = 0x00000001; + lcd->LCDCON2 = 55 << 14; /* T119C: 56 lines */ + lcd->LCDCON3 = 0x0051000A; + lcd->LCDCON4 = 0x00000001; if (gd->vfd_type && vfd_inv_data) - rLCDCON5 = 0x000004C0; + lcd->LCDCON5 = 0x000004C0; else - rLCDCON5 = 0x00000440; + lcd->LCDCON5 = 0x00000440; /* Port pins as LCD output */ - rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA; - rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8; + gpio->PCCON = (gpio->PCCON & 0xFFFFFF00)| 0x000000AA; + gpio->PDCON = (gpio->PDCON & 0xFFFFFF03)| 0x000000A8; /* Synchronize VFD enable with LCD controller to avoid flicker */ - rLCDCON1 = 0x00000B75; /* Start LCD-Controller */ - while((rLCDCON5 & 0x180000)!=0x100000); /* Wait for end of VSYNC */ - while((rLCDCON5 & 0x060000)!=0x040000); /* Wait for next HSYNC */ - while((rLCDCON5 & 0x060000)==0x040000); - while((rLCDCON5 & 0x060000)!=0x000000); + lcd->LCDCON1 = 0x00000B75; /* Start LCD-Controller */ + while((lcd->LCDCON5 & 0x180000)!=0x100000); /* Wait for end of VSYNC */ + while((lcd->LCDCON5 & 0x060000)!=0x040000); /* Wait for next HSYNC */ + while((lcd->LCDCON5 & 0x060000)==0x040000); + while((lcd->LCDCON5 & 0x060000)!=0x000000); if(gd->vfd_type) VFD_ENABLE; - debug ("LCDSADDR1: %lX\n", rLCDSADDR1); - debug ("LCDSADDR2: %lX\n", rLCDSADDR2); - debug ("LCDSADDR3: %lX\n", rLCDSADDR3); + debug ("LCDSADDR1: %lX\n", lcd->LCDSADDR1); + debug ("LCDSADDR2: %lX\n", lcd->LCDSADDR2); + debug ("LCDSADDR3: %lX\n", lcd->LCDSADDR3); return 0; } @@ -525,9 +530,11 @@ rLCDCON2 = 0x000DC000; */ void disable_vfd (void) { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + VFD_DISABLE; - rPDCON &= ~0xC; - rPDUP &= ~0x2; + gpio->PDCON &= ~0xC; + gpio->PDUP &= ~0x2; } /************************************************************************/ diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c index 195fb01477..dd944fbe1a 100644 --- a/cpu/arm920t/interrupts.c +++ b/cpu/arm920t/interrupts.c @@ -43,7 +43,12 @@ extern void reset_cpu(ulong addr); int timer_load_val = 0; /* macro to read the 16 bit timer */ -#define READ_TIMER (rTCNTO4 & 0xffff) +static inline ulong READ_TIMER(void) +{ + S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS(); + + return (timers->TCNTO4 & 0xffff); +} #ifdef CONFIG_USE_IRQ /* enable IRQ interrupts */ @@ -184,9 +189,11 @@ static ulong lastdec; int interrupt_init (void) { + S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS(); + /* use PWM Timer 4 because it has no output */ /* prescaler for Timer 4 is 16 */ - rTCFG0 = 0x0f00; + timers->TCFG0 = 0x0f00; if (timer_load_val == 0) { /* @@ -197,11 +204,11 @@ int interrupt_init (void) timer_load_val = get_PCLK()/(2 * 16 * 100); } /* load value for 10 ms timeout */ - lastdec = rTCNTB4 = timer_load_val; + lastdec = timers->TCNTB4 = timer_load_val; /* auto load, manual update of Timer 4 */ - rTCON = (rTCON & ~0x0700000) | 0x600000; + timers->TCON = (timers->TCON & ~0x0700000) | 0x600000; /* auto load, start Timer 4 */ - rTCON = (rTCON & ~0x0700000) | 0x500000; + timers->TCON = (timers->TCON & ~0x0700000) | 0x500000; timestamp = 0; return (0); @@ -243,13 +250,13 @@ void udelay (unsigned long usec) void reset_timer_masked (void) { /* reset time */ - lastdec = READ_TIMER; + lastdec = READ_TIMER(); timestamp = 0; } ulong get_timer_masked (void) { - ulong now = READ_TIMER; + ulong now = READ_TIMER(); if (lastdec >= now) { /* normal mode */ diff --git a/cpu/arm920t/serial.c b/cpu/arm920t/serial.c index c32e73b714..10cfadecf0 100644 --- a/cpu/arm920t/serial.c +++ b/cpu/arm920t/serial.c @@ -25,57 +25,51 @@ #include <s3c2410.h> #endif +#ifdef CONFIG_SERIAL1 +#define UART_NR S3C24X0_UART0 + +#elif CONFIG_SERIAL2 +# if defined(CONFIG_TRAB) +# #error "TRAB supports only CONFIG_SERIAL1" +# endif +#define UART_NR S3C24X0_UART1 + +#elif CONFIG_SERIAL3 +# if defined(CONFIG_TRAB) +# #error "TRAB supports only CONFIG_SERIAL1" +# endif +#define UART_NR S3C24X0_UART2 + +#else +#error "Bad: you didn't configure serial ..." +#endif void serial_setbrg (void) { DECLARE_GLOBAL_DATA_PTR; - + S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); int i; unsigned int reg = 0; /* value is calculated so : (int)(PCLK/16./baudrate) -1 */ reg = get_PCLK() / (16 * gd->baudrate) - 1; -#ifdef CONFIG_SERIAL1 /* FIFO enable, Tx/Rx FIFO clear */ - rUFCON0 = 0x07; - rUMCON0 = 0x0; + uart->UFCON = 0x07; + uart->UMCON = 0x0; /* Normal,No parity,1 stop,8 bit */ - rULCON0 = 0x3; + uart->ULCON = 0x3; /* * tx=level,rx=edge,disable timeout int.,enable rx error int., * normal,interrupt or polling */ - rUCON0 = 0x245; - rUBRDIV0 = reg; + uart->UCON = 0x245; + uart->UBRDIV = reg; #ifdef CONFIG_HWFLOW - rUMCON0 = 0x1; /* RTS up */ + uart->UMCON = 0x1; /* RTS up */ #endif for (i = 0; i < 100; i++); -#elif CONFIG_SERIAL2 -# if defined(CONFIG_TRAB) -# #error "TRAB supports only CONFIG_SERIAL1" -# endif - /* FIFO enable, Tx/Rx FIFO clear */ - rUFCON1 = 0x06; - rUMCON1 = 0x0; - /* Normal,No parity,1 stop,8 bit */ - rULCON1 = 0x3; - /* - * tx=level,rx=edge,disable timeout int.,enable rx error int., - * normal,interrupt or polling - */ - rUCON1 = 0x245; - rUBRDIV1 = reg; - -#ifdef CONFIG_HWFLOW - rUMCON1 = 0x1; /* RTS up */ -#endif - for (i = 0; i < 100; i++); -#else -#error "Bad: you didn't configure serial ..." -#endif } /* @@ -97,15 +91,12 @@ int serial_init (void) */ int serial_getc (void) { -#ifdef CONFIG_SERIAL1 - while (!(rUTRSTAT0 & 0x1)); + S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); + + /* wait for character to arrive */ + while (!(uart->UTRSTAT & 0x1)); - return rURXH0 & 0xff; -#elif CONFIG_SERIAL2 - while (!(rUTRSTAT1 & 0x1)); - - return rURXH1 & 0xff; -#endif + return uart->URXH & 0xff; } #ifdef CONFIG_HWFLOW @@ -146,33 +137,22 @@ void enable_putc(void) */ void serial_putc (const char c) { + S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); #ifdef CONFIG_MODEM_SUPPORT if (be_quiet) return; #endif -#ifdef CONFIG_SERIAL1 - /* wait for room in the tx FIFO on SERIAL1 */ - while (!(rUTRSTAT0 & 0x2)); + /* wait for room in the tx FIFO */ + while (!(uart->UTRSTAT & 0x2)); #ifdef CONFIG_HWFLOW /* Wait for CTS up */ - while(hwflow && !(rUMSTAT0 & 0x1)) + while(hwflow && !(uart->UMSTAT & 0x1)) ; #endif - rUTXH0 = c; -#elif CONFIG_SERIAL2 - /* wait for room in the tx FIFO on SERIAL2 */ - while (!(rUTRSTAT1 & 0x2)); - -#ifdef CONFIG_HWFLOW - /* Wait for CTS up */ - while(hwflow && !(rUMSTAT1 & 0x1)) - ; -#endif - rUTXH1 = c; -#endif + uart->UTXH = c; /* If \n, also do \r */ if (c == '\n') @@ -184,11 +164,9 @@ void serial_putc (const char c) */ int serial_tstc (void) { -#ifdef CONFIG_SERIAL1 - return rUTRSTAT0 & 0x1; -#elif CONFIG_SERIAL2 - return rUTRSTAT1 & 0x1; -#endif + S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); + + return uart->UTRSTAT & 0x1; } void diff --git a/cpu/arm920t/speed.c b/cpu/arm920t/speed.c index 4942727272..1f435436b0 100644 --- a/cpu/arm920t/speed.c +++ b/cpu/arm920t/speed.c @@ -51,12 +51,13 @@ static ulong get_PLLCLK(int pllreg) { + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ulong r, m, p, s; if (pllreg == MPLL) - r = rMPLLCON; + r = clk_power->MPLLCON; else if (pllreg == UPLL) - r = rUPLLCON; + r = clk_power->UPLLCON; else hang(); @@ -76,17 +77,17 @@ ulong get_FCLK(void) /* return HCLK frequency */ ulong get_HCLK(void) { - ulong clkdiv = rCLKDIVN; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - return((clkdiv & 0x2) ? get_FCLK()/2 : get_FCLK()); + return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK()); } /* return PCLK frequency */ ulong get_PCLK(void) { - ulong clkdiv = rCLKDIVN; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - return((clkdiv & 0x1) ? get_HCLK()/2 : get_HCLK()); + return((clk_power->CLKDIVN & 0x1) ? get_HCLK()/2 : get_HCLK()); } /* return UCLK frequency */ diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile index a1e0421aea..c05b394f56 100644 --- a/cpu/mpc5xx/Makefile +++ b/cpu/mpc5xx/Makefile @@ -35,7 +35,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = start.S -OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o status_led.o +OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o all: .depend $(START) $(LIB) diff --git a/cpu/mpc5xx/status_led.c b/cpu/mpc5xx/status_led.c deleted file mode 100644 index f15bbe8215..0000000000 --- a/cpu/mpc5xx/status_led.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * (C) Copyright 2000-2002 Wolfgang Denk, DENX Software Engineering, wd@denx.de - * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * File: status_led.c - * - * Discription: Blink a board led to show boot progress. Led's - * are connected via the MIOS module. - */ - -#include <common.h> -#include <mpc5xx.h> -#include <status_led.h> - -#ifdef CONFIG_STATUS_LED - -typedef struct { - ulong mask; - int state; - int period; - int cnt; -} led_dev_t; - -led_dev_t led_dev[] = { - { STATUS_LED_BIT, - STATUS_LED_STATE, - STATUS_LED_PERIOD, - 0, - }, -#if defined(STATUS_LED_BIT1) - { STATUS_LED_BIT1, - STATUS_LED_STATE1, - STATUS_LED_PERIOD1, - 0, - }, -#endif -#if defined(STATUS_LED_BIT2) - { STATUS_LED_BIT2, - STATUS_LED_STATE2, - STATUS_LED_PERIOD2, - 0, - }, -#endif -#if defined(STATUS_LED_BIT3) - { STATUS_LED_BIT3, - STATUS_LED_STATE3, - STATUS_LED_PERIOD3, - 0, - }, -#endif -}; - -#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t)) - -static int status_led_init_done = 0; - -static void status_led_init (void) -{ - volatile immap_t *immr = (immap_t *)CFG_IMMR; - int i; - - for (i=0; i<MAX_LED_DEV; ++i) { - led_dev_t *ld = &led_dev[i]; - - immr->STATUS_LED_DIR = STATUS_LED_BIT; - -#if (STATUS_LED_ACTIVE == 0) - if (ld->state == STATUS_LED_ON) - immr->STATUS_LED_DAT &= ~(ld->mask); - else - immr->STATUS_LED_DAT |= ld->mask ; -#else - if (ld->state == STATUS_LED_ON) - immr->STATUS_LED_DAT |= ld->mask ; - else - immr->STATUS_LED_DAT &= ~(ld->mask); -#endif - } - - status_led_init_done = 1; -} - -void status_led_tick (ulong timestamp) -{ - volatile immap_t *immr = (immap_t *)CFG_IMMR; - int i; - - if (!status_led_init_done) - status_led_init(); - - for (i=0; i<MAX_LED_DEV; ++i) { - led_dev_t *ld = &led_dev[i]; - - if (ld->state != STATUS_LED_BLINKING) - continue; - - if (++(ld->cnt) >= ld->period) { - immr->STATUS_LED_DAT ^= ld->mask; - ld->cnt -= ld->period; - } - } -} - -void status_led_set (int led, int state) -{ - volatile immap_t *immr = (immap_t *)CFG_IMMR; - led_dev_t *ld; - - if (led < 0 || led >= MAX_LED_DEV) - return; - - if (!status_led_init_done) - status_led_init(); - - ld = &led_dev[led]; - - switch (state) { - default: - return; - case STATUS_LED_BLINKING: - ld->cnt = 0; /* always start with full period */ - /* fall through */ /* always start with LED _ON_ */ - case STATUS_LED_ON: -#if (STATUS_LED_ACTIVE == 0) - immr->STATUS_LED_DAT &= ~(ld->mask); -#else - immr->STATUS_LED_DAT |= ld->mask ; -#endif - break; - case STATUS_LED_OFF: -#if (STATUS_LED_ACTIVE == 0) - immr->STATUS_LED_DAT |= ld->mask ; -#else - immr->STATUS_LED_DAT &= ~(ld->mask); -#endif - break; - } - ld->state = state; -} - -#endif /* CONFIG_STATUS_LED */ diff --git a/cpu/mpc8260/Makefile b/cpu/mpc8260/Makefile index 81f74eca8a..b4c269f9c9 100644 --- a/cpu/mpc8260/Makefile +++ b/cpu/mpc8260/Makefile @@ -28,7 +28,7 @@ LIB = lib$(CPU).a START = start.o kgdb.o OBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \ interrupts.o ether_scc.o ether_fcc.o i2c.o commproc.o \ - bedbug_603e.o status_led.o pci.o spi.o + bedbug_603e.o pci.o spi.o all: .depend $(START) $(LIB) diff --git a/cpu/mpc8260/ether_scc.c b/cpu/mpc8260/ether_scc.c index ff164fece7..8b6af3109d 100644 --- a/cpu/mpc8260/ether_scc.c +++ b/cpu/mpc8260/ether_scc.c @@ -333,7 +333,7 @@ int eth_init(bd_t *bis) immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - return 1; + return 0; } diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S index 0e6b963f16..2070ecc5eb 100644 --- a/cpu/mpc8260/start.S +++ b/cpu/mpc8260/start.S @@ -161,6 +161,7 @@ _hrcw_table: .globl _start _start: li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/ + nop b boot_cold . = EXC_OFF_SYS_RESET + 0x10 @@ -171,6 +172,18 @@ _start_warm: b boot_warm boot_cold: +#if defined(CONFIG_MPC8260ADS) + lis r3, CFG_DEFAULT_IMMR@h + nop + lwz r4, 0(r3) + nop + rlwinm r4, r4, 0, 8, 5 + nop + oris r4, r4, 0x0200 + nop + stw r4, 0(r3) + nop +#endif /* CONFIG_MPC8260ADS */ boot_warm: mfmsr r5 /* save msr contents */ diff --git a/cpu/mpc8260/status_led.c b/cpu/mpc8260/status_led.c deleted file mode 100644 index 0174e39916..0000000000 --- a/cpu/mpc8260/status_led.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <status_led.h> - -/* - * The purpose of this code is to signal the operational status of a - * target which usually boots over the network; while running in - * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply - * message has been received, the LED is turned off. The Linux - * kernel, once it is running, will start blinking the LED again, - * with another frequency. - */ - -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_STATUS_LED - -typedef struct { - ulong mask; - int state; - int period; - int cnt; -} led_dev_t; - -led_dev_t led_dev[] = { - { STATUS_LED_BIT, - STATUS_LED_STATE, - STATUS_LED_PERIOD, - 0, - }, -#if defined(STATUS_LED_BIT1) - { STATUS_LED_BIT1, - STATUS_LED_STATE1, - STATUS_LED_PERIOD1, - 0, - }, -#endif -#if defined(STATUS_LED_BIT2) - { STATUS_LED_BIT2, - STATUS_LED_STATE2, - STATUS_LED_PERIOD2, - 0, - }, -#endif -}; - -#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t)) - -static int status_led_init_done = 0; - -static void status_led_init (void) -{ - volatile immap_t *immr = (immap_t *)CFG_IMMR; - int i; - - for (i=0; i<MAX_LED_DEV; ++i) { - led_dev_t *ld = &led_dev[i]; - - immr->STATUS_LED_PAR &= ~(ld->mask); -#ifdef STATUS_LED_ODR - immr->STATUS_LED_ODR &= ~(ld->mask); -#endif -#if (STATUS_LED_ACTIVE == 0) - if (ld->state == STATUS_LED_ON) - immr->STATUS_LED_DAT &= ~(ld->mask); - else - immr->STATUS_LED_DAT |= ld->mask ; -#else - if (ld->state == STATUS_LED_ON) - immr->STATUS_LED_DAT |= ld->mask ; - else - immr->STATUS_LED_DAT &= ~(ld->mask); -#endif - immr->STATUS_LED_DIR |= ld->mask ; - } - - status_led_init_done = 1; -} - -void status_led_tick (ulong timestamp) -{ - volatile immap_t *immr = (immap_t *)CFG_IMMR; - int i; - - if (!status_led_init_done) - status_led_init(); - - for (i=0; i<MAX_LED_DEV; ++i) { - led_dev_t *ld = &led_dev[i]; - - if (ld->state != STATUS_LED_BLINKING) - continue; - - if (++(ld->cnt) >= ld->period) { - immr->STATUS_LED_DAT ^= ld->mask; - ld->cnt -= ld->period; - } - } -} - -void status_led_set (int led, int state) -{ - volatile immap_t *immr = (immap_t *)CFG_IMMR; - led_dev_t *ld; - - if (led < 0 || led >= MAX_LED_DEV) - return; - - if (!status_led_init_done) - status_led_init(); - - ld = &led_dev[led]; - - switch (state) { - default: - return; - case STATUS_LED_BLINKING: - ld->cnt = 0; /* always start with full period */ - /* fall through */ /* always start with LED _ON_ */ - case STATUS_LED_ON: -#if (STATUS_LED_ACTIVE == 0) - immr->STATUS_LED_DAT &= ~(ld->mask); -#else - immr->STATUS_LED_DAT |= ld->mask ; -#endif - break; - case STATUS_LED_OFF: -#if (STATUS_LED_ACTIVE == 0) - immr->STATUS_LED_DAT |= ld->mask ; -#else - immr->STATUS_LED_DAT &= ~(ld->mask); -#endif - break; - } - ld->state = state; -} - -#endif /* CONFIG_STATUS_LED */ diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile index 8b05721d5c..e8c93cc65f 100644 --- a/cpu/mpc8xx/Makefile +++ b/cpu/mpc8xx/Makefile @@ -30,7 +30,7 @@ LIB = lib$(CPU).a START = start.o kgdb.o OBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \ fec.o i2c.o interrupts.o lcd.o scc.o \ - serial.o speed.o spi.o status_led.o\ + serial.o speed.o spi.o \ traps.o upatch.o video.o all: .depend $(START) $(LIB) diff --git a/drivers/Makefile b/drivers/Makefile index 50fc75ae07..8eb9472d0d 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -38,7 +38,8 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ pcnet.o plb2800_eth.o \ s3c24x0_i2c.o sed13806.o serial.o \ smc91111.o smiLynxEM.o sym53c8xx.o \ - ti_pci1410a.o tigon3.o w83c553f.o + ti_pci1410a.o tigon3.o w83c553f.o \ + status_led.o ## Disabled for now: ## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \ diff --git a/drivers/s3c24x0_i2c.c b/drivers/s3c24x0_i2c.c index b50176118a..eeb6cf6d1d 100644 --- a/drivers/s3c24x0_i2c.c +++ b/drivers/s3c24x0_i2c.c @@ -39,103 +39,114 @@ #ifdef CONFIG_HARD_I2C -#define IIC_WRITE 0 -#define IIC_READ 1 +#define I2C_WRITE 0 +#define I2C_READ 1 -#define IIC_OK 0 -#define IIC_NOK 1 -#define IIC_NACK 2 -#define IIC_NOK_LA 3 /* Lost arbitration */ -#define IIC_NOK_TOUT 4 /* time out */ +#define I2C_OK 0 +#define I2C_NOK 1 +#define I2C_NACK 2 +#define I2C_NOK_LA 3 /* Lost arbitration */ +#define I2C_NOK_TOUT 4 /* time out */ -#define IICSTAT_BSY 0x20 /* Busy bit */ -#define IICSTAT_NACK 0x01 /* Nack bit */ -#define IICCON_IRPND 0x10 /* Interrupt pending bit */ -#define IIC_MODE_MT 0xC0 /* Master Transmit Mode */ -#define IIC_MODE_MR 0x80 /* Master Receive Mode */ -#define IIC_START_STOP 0x20 /* START / STOP */ -#define IIC_TXRX_ENA 0x10 /* I2C Tx/Rx enable */ +#define I2CSTAT_BSY 0x20 /* Busy bit */ +#define I2CSTAT_NACK 0x01 /* Nack bit */ +#define I2CCON_IRPND 0x10 /* Interrupt pending bit */ +#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */ +#define I2C_MODE_MR 0x80 /* Master Receive Mode */ +#define I2C_START_STOP 0x20 /* START / STOP */ +#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */ -#define IIC_TIMEOUT 1 /* 1 seconde */ +#define I2C_TIMEOUT 1 /* 1 seconde */ -static int GetIICSDA(void) +static int GetI2CSDA(void) { - return (rGPEDAT & 0x8000) >> 15; + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + return (gpio->GPEDAT & 0x8000) >> 15; } #if 0 -static void SetIICSDA(int x) +static void SetI2CSDA(int x) { rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15; } #endif -static void SetIICSCL(int x) +static void SetI2CSCL(int x) { - rGPEDAT = (rGPEDAT & ~0x4000) | (x&1) << 14; + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14; } static int WaitForXfer(void) { + S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); int i, status; - i = IIC_TIMEOUT * 1000; - status = rIICCON; - while ((i > 0) && !(status & IICCON_IRPND)) { + i = I2C_TIMEOUT * 1000; + status = i2c->IICCON; + while ((i > 0) && !(status & I2CCON_IRPND)) { udelay(1000); - status = rIICCON; + status = i2c->IICCON; i--; } - return(status & IICCON_IRPND) ? IIC_OK : IIC_NOK_TOUT; + return(status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; } static int IsACK(void) { - return(!(rIICSTAT & IICSTAT_NACK)); + S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); + + return(!(i2c->IICSTAT & I2CSTAT_NACK)); } static void ReadWriteByte(void) { - rIICCON &= ~IICCON_IRPND; + S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); + + i2c->IICCON &= ~I2CCON_IRPND; } void i2c_init (int speed, int slaveadd) { + S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ulong freq, pres = 16, div; int i, status; /* wait for some time to give previous transfer a chance to finish */ - i = IIC_TIMEOUT * 1000; - status = rIICSTAT; - while ((i > 0) && (status & IICSTAT_BSY)) { + i = I2C_TIMEOUT * 1000; + status = i2c->IICSTAT; + while ((i > 0) && (status & I2CSTAT_BSY)) { udelay(1000); - status = rIICSTAT; + status = i2c->IICSTAT; i--; } - if ((status & IICSTAT_BSY) || GetIICSDA() == 0) { - ulong old_gpecon = rGPECON; + if ((status & I2CSTAT_BSY) || GetI2CSDA() == 0) { + ulong old_gpecon = gpio->GPECON; /* bus still busy probably by (most) previously interrupted transfer */ - /* set IICSDA and IICSCL (GPE15, GPE14) to GPIO */ - rGPECON = (rGPECON & ~0xF0000000) | 0x10000000; + /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ + gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000; - /* toggle IICSCL until bus idle */ - SetIICSCL(0); udelay(1000); + /* toggle I2CSCL until bus idle */ + SetI2CSCL(0); udelay(1000); i = 10; - while ((i > 0) && (GetIICSDA() != 1)) { - SetIICSCL(1); udelay(1000); - SetIICSCL(0); udelay(1000); + while ((i > 0) && (GetI2CSDA() != 1)) { + SetI2CSCL(1); udelay(1000); + SetI2CSCL(0); udelay(1000); i--; } - SetIICSCL(1); udelay(1000); + SetI2CSCL(1); udelay(1000); /* restore pin functions */ - rGPECON = old_gpecon; + gpio->GPECON = old_gpecon; } /* calculate prescaler and divisor values */ @@ -150,13 +161,13 @@ void i2c_init (int speed, int slaveadd) /* set prescaler, divisor according to freq, also set ACKGEN, IRQ */ - rIICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0); + i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0); /* init to SLAVE REVEIVE and set slaveaddr */ - rIICSTAT = 0; - rIICADD = slaveadd; + i2c->IICSTAT = 0; + i2c->IICADD = slaveadd; /* program Master Transmit (and implicit STOP) */ - rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA; + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA; } @@ -176,142 +187,143 @@ int i2c_transfer(unsigned char cmd_type, unsigned char data[], unsigned short data_len) { + S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); int i, status, result; if (data == 0 || data_len == 0) { /*Don't support data transfer of no length or to address 0*/ printf( "i2c_transfer: bad call\n" ); - return IIC_NOK; + return I2C_NOK; } //CheckDelay(); /* Check I2C bus idle */ - i = IIC_TIMEOUT * 1000; - status = rIICSTAT; - while ((i > 0) && (status & IICSTAT_BSY)) { + i = I2C_TIMEOUT * 1000; + status = i2c->IICSTAT; + while ((i > 0) && (status & I2CSTAT_BSY)) { udelay(1000); - status = rIICSTAT; + status = i2c->IICSTAT; i--; } - if (status & IICSTAT_BSY) { - result = IIC_NOK_TOUT; + if (status & I2CSTAT_BSY) { + result = I2C_NOK_TOUT; return(result); } - rIICCON |= 0x80; + i2c->IICCON |= 0x80; - result = IIC_OK; + result = I2C_OK; switch (cmd_type) { - case IIC_WRITE: + case I2C_WRITE: if (addr && addr_len) { - rIICDS = chip; + i2c->IICDS = chip; /* send START */ - rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA | IIC_START_STOP; + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP; i = 0; - while ((i < addr_len) && (result == IIC_OK)) { + while ((i < addr_len) && (result == I2C_OK)) { result = WaitForXfer(); - rIICDS = addr[i]; + i2c->IICDS = addr[i]; ReadWriteByte(); i++; } i = 0; - while ((i < data_len) && (result == IIC_OK)) { + while ((i < data_len) && (result == I2C_OK)) { result = WaitForXfer(); - rIICDS = data[i]; + i2c->IICDS = data[i]; ReadWriteByte(); i++; } } else { - rIICDS = chip; + i2c->IICDS = chip; /* send START */ - rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA | IIC_START_STOP; + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP; i = 0; - while ((i < data_len) && (result = IIC_OK)) { + while ((i < data_len) && (result = I2C_OK)) { result = WaitForXfer(); - rIICDS = data[i]; + i2c->IICDS = data[i]; ReadWriteByte(); i++; } } - if (result == IIC_OK) + if (result == I2C_OK) result = WaitForXfer(); /* send STOP */ - rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA; + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; ReadWriteByte(); break; - case IIC_READ: + case I2C_READ: if (addr && addr_len) { - rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA; - rIICDS = chip; + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA; + i2c->IICDS = chip; /* send START */ - rIICSTAT |= IIC_START_STOP; + i2c->IICSTAT |= I2C_START_STOP; result = WaitForXfer(); if (IsACK()) { i = 0; - while ((i < addr_len) && (result == IIC_OK)) { - rIICDS = addr[i]; + while ((i < addr_len) && (result == I2C_OK)) { + i2c->IICDS = addr[i]; ReadWriteByte(); result = WaitForXfer(); i++; } - rIICDS = chip; + i2c->IICDS = chip; /* resend START */ - rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA | IIC_START_STOP; + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP; ReadWriteByte(); result = WaitForXfer(); i = 0; - while ((i < data_len) && (result == IIC_OK)) { + while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - rIICCON &= ~0x80; + i2c->IICCON &= ~0x80; ReadWriteByte(); result = WaitForXfer(); - data[i] = rIICDS; + data[i] = i2c->IICDS; i++; } } else { - result = IIC_NACK; + result = I2C_NACK; } } else { - rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA; - rIICDS = chip; + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; + i2c->IICDS = chip; /* send START */ - rIICSTAT |= IIC_START_STOP; + i2c->IICSTAT |= I2C_START_STOP; result = WaitForXfer(); if (IsACK()) { i = 0; - while ((i < data_len) && (result == IIC_OK)) { + while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - rIICCON &= ~0x80; + i2c->IICCON &= ~0x80; ReadWriteByte(); result = WaitForXfer(); - data[i] = rIICDS; + data[i] = i2c->IICDS; i++; } } else { - result = IIC_NACK; + result = I2C_NACK; } } /* send STOP */ - rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA; + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; ReadWriteByte(); break; default: printf( "i2c_transfer: bad call\n" ); - result = IIC_NOK; + result = I2C_NOK; break; } @@ -329,7 +341,7 @@ int i2c_probe (uchar chip) * address was <ACK>ed (i.e. there was a chip at that address which * drove the data line low). */ - return(i2c_transfer (IIC_READ, chip << 1, 0, 0, buf, 1) != IIC_OK); + return(i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK); } int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) @@ -365,7 +377,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) if( alen > 0 ) chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); #endif - if( (ret = i2c_transfer(IIC_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) { + if( (ret = i2c_transfer(I2C_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) { printf( "I2c read: failed %d\n", ret); return 1; } @@ -403,7 +415,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) if( alen > 0 ) chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); #endif - return (i2c_transfer(IIC_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); + return (i2c_transfer(I2C_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); } #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc8xx/status_led.c b/drivers/status_led.c index d8aaeec55d..ddb6c22e89 100644 --- a/cpu/mpc8xx/status_led.c +++ b/drivers/status_led.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -22,13 +22,12 @@ */ #include <common.h> -#include <mpc8xx.h> #include <status_led.h> /* * The purpose of this code is to signal the operational status of a * target which usually boots over the network; while running in - * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply + * U-Boot, a status LED is blinking. As soon as a valid BOOTP reply * message has been received, the LED is turned off. The Linux * kernel, once it is running, will start blinking the LED again, * with another frequency. @@ -39,10 +38,10 @@ #ifdef CONFIG_STATUS_LED typedef struct { - ulong mask; - int state; - int period; - int cnt; + led_id_t mask; + int state; + int period; + int cnt; } led_dev_t; led_dev_t led_dev[] = { @@ -80,89 +79,53 @@ static int status_led_init_done = 0; static void status_led_init (void) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - int i; + led_dev_t *ld; + int i; - for (i=0; i<MAX_LED_DEV; ++i) { - led_dev_t *ld = &led_dev[i]; - - immr->STATUS_LED_PAR &= ~(ld->mask); -#ifdef STATUS_LED_ODR - immr->STATUS_LED_ODR &= ~(ld->mask); -#endif -#if (STATUS_LED_ACTIVE == 0) - if (ld->state == STATUS_LED_ON) - immr->STATUS_LED_DAT &= ~(ld->mask); - else - immr->STATUS_LED_DAT |= ld->mask ; -#else - if (ld->state == STATUS_LED_ON) - immr->STATUS_LED_DAT |= ld->mask ; - else - immr->STATUS_LED_DAT &= ~(ld->mask); -#endif - immr->STATUS_LED_DIR |= ld->mask ; - } - - status_led_init_done = 1; + for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) + __led_init (ld->mask, ld->state); + status_led_init_done = 1; } void status_led_tick (ulong timestamp) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - int i; + led_dev_t *ld; + int i; + + if (!status_led_init_done) + status_led_init (); - if (!status_led_init_done) - status_led_init(); + for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) { - for (i=0; i<MAX_LED_DEV; ++i) { - led_dev_t *ld = &led_dev[i]; + if (ld->state != STATUS_LED_BLINKING) + continue; - if (ld->state != STATUS_LED_BLINKING) - continue; + if (++ld->cnt >= ld->period) { + __led_toggle (ld->mask); + ld->cnt -= ld->period; + } - if (++(ld->cnt) >= ld->period) { - immr->STATUS_LED_DAT ^= ld->mask; - ld->cnt -= ld->period; } - } } void status_led_set (int led, int state) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - led_dev_t *ld; - - if (led < 0 || led >= MAX_LED_DEV) - return; - - if (!status_led_init_done) - status_led_init(); - - ld = &led_dev[led]; - - switch (state) { - default: - return; - case STATUS_LED_BLINKING: - ld->cnt = 0; /* always start with full period */ - /* fall through */ /* always start with LED _ON_ */ - case STATUS_LED_ON: -#if (STATUS_LED_ACTIVE == 0) - immr->STATUS_LED_DAT &= ~(ld->mask); -#else - immr->STATUS_LED_DAT |= ld->mask ; -#endif - break; - case STATUS_LED_OFF: -#if (STATUS_LED_ACTIVE == 0) - immr->STATUS_LED_DAT |= ld->mask ; -#else - immr->STATUS_LED_DAT &= ~(ld->mask); -#endif - break; - } - ld->state = state; + led_dev_t *ld; + + if (led < 0 || led >= MAX_LED_DEV) + return; + + if (!status_led_init_done) + status_led_init (); + + ld = &led_dev[led]; + + ld->state = state; + if (state == STATUS_LED_BLINKING) { + ld->cnt = 0; /* always start with full period */ + state = STATUS_LED_ON; /* always start with LED _ON_ */ + } + __led_set (ld->mask, state); } #endif /* CONFIG_STATUS_LED */ diff --git a/include/asm-ppc/status_led.h b/include/asm-ppc/status_led.h new file mode 100644 index 0000000000..eb81f371c9 --- /dev/null +++ b/include/asm-ppc/status_led.h @@ -0,0 +1,77 @@ +/* + * asm/status_led.h + * + * MPC8xx/MPC8260/MPC5xx based status led support functions + */ + +#ifndef __ASM_STATUS_LED_H__ +#define __ASM_STATUS_LED_H__ + +/* if not overriden */ +#ifndef CONFIG_BOARD_SPECIFIC_LED +# if defined(CONFIG_8xx) +# include <mpc8xx.h> +# elif defined(CONFIG_8260) +# include <mpc8260.h> +# elif defined(CONFIG_5xx) +# include <mpc5xx.h> +# else +# error CPU specific Status LED header file missing. +#endif + +/* led_id_t is unsigned long mask */ +typedef unsigned long led_id_t; + +static inline void __led_init (led_id_t mask, int state) +{ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + +#ifdef STATUS_LED_PAR + immr->STATUS_LED_PAR &= ~mask; +#endif +#ifdef STATUS_LED_ODR + immr->STATUS_LED_ODR &= ~mask; +#endif + +#if (STATUS_LED_ACTIVE == 0) + if (state == STATUS_LED_ON) + immr->STATUS_LED_DAT &= ~mask; + else + immr->STATUS_LED_DAT |= mask; +#else + if (state == STATUS_LED_ON) + immr->STATUS_LED_DAT |= mask; + else + immr->STATUS_LED_DAT &= ~mask; +#endif +#ifdef STATUS_LED_DIR + immr->STATUS_LED_DIR |= mask; +#endif +} + +static inline void __led_toggle (led_id_t mask) +{ + ((immap_t *) CFG_IMMR)->STATUS_LED_DAT ^= mask; +} + +static inline void __led_set (led_id_t mask, int state) +{ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + +#if (STATUS_LED_ACTIVE == 0) + if (state == STATUS_LED_ON) + immr->STATUS_LED_DAT &= ~mask; + else + immr->STATUS_LED_DAT |= mask; +#else + if (state == STATUS_LED_ON) + immr->STATUS_LED_DAT |= mask; + else + immr->STATUS_LED_DAT &= ~mask; +#endif + +} + +#endif + +#endif /* __ASM_STATUS_LED_H__ */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 30b72076ea..dc2c313193 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -26,10 +26,6 @@ * MA 02111-1307 USA */ -/* - * Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm - */ - #ifndef __CONFIG_H #define __CONFIG_H @@ -77,23 +73,45 @@ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ -#if (CONFIG_ETHER_INDEX == 2) +#ifdef CONFIG_ETHER_ON_FCC +#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ + +#if (CONFIG_ETHER_INDEX == 2) /* * - Rx-CLK is CLK13 * - Tx-CLK is CLK14 * - Select bus for bd/buffers (see 28-13) - * - Half duplex + * - Full duplex */ # define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) # define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) # define CFG_CPMFCR_RAMTYPE 0 -# define CFG_FCC_PSMR 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #endif /* CONFIG_ETHER_INDEX */ +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +/* + * GPIO pins used for bit-banged MII communications + */ +#define MDIO_PORT 2 /* Port C */ +#define MDIO_ACTIVE (iop->pdir |= 0x00400000) +#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) +#define MDIO_READ ((iop->pdat & 0x00400000) != 0) + +#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ + else iop->pdat &= ~0x00400000 + +#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ + else iop->pdat &= ~0x00200000 + +#define MIIDELAY udelay(1) + +#endif /* CONFIG_ETHER_ON_FCC */ + /* other options */ #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ @@ -172,9 +190,6 @@ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - /* for versions < 2.4.5-pre5 */ - #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ @@ -239,8 +254,8 @@ #ifndef CFG_RAMBOOT # define CFG_ENV_IS_IN_FLASH 1 -# define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) -# define CFG_ENV_SECT_SIZE 0x40000 +# define CFG_ENV_SECT_SIZE 0x40000 +# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) #else # define CFG_ENV_IS_IN_NVRAM 1 # define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index a73281c02f..c0103fc335 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -59,9 +59,13 @@ #define CONFIG_COMMANDS \ (CONFIG_CMD_DFL | \ CFG_CMD_CACHE | \ + /*CFG_CMD_JFFS2 |*/ \ + /*CFG_CMD_NAND |*/ \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ + /*CFG_CMD_USB |*/ \ CFG_CMD_REGINFO | \ + CFG_CMD_DATE | \ CFG_CMD_ELF | \ CFG_CMD_BSP) @@ -111,6 +115,24 @@ */ #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on VCMA9 */ +/************************************************************ + * USB support + ************************************************************/ +#if 0 +#define CONFIG_USB_OHCI +#define CONFIG_USB_KEYBOARD +#define CONFIG_USB_STORAGE + +/* Enable needed helper functions */ +#define CFG_DEVICE_DEREGISTER /* needs device_deregister */ +#endif + +/************************************************************ + * RTC + ************************************************************/ +#define CONFIG_RTC_S3C24X0 1 + + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -138,7 +160,7 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ +#define CFG_MEMTEST_END 0x33F80000 /* 63.5 MB in DRAM */ #define CFG_ALT_MEMTEST #define CFG_LOAD_ADDR 0x33000000 /* default load address */ @@ -152,6 +174,13 @@ /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/************************************************************ + * Ident + ************************************************************/ +/*#define VERSION_TAG "released"*/ +#define VERSION_TAG "unstable" +#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, MEV-10080-001 " VERSION_TAG + /*----------------------------------------------------------------------- * Stack sizes * @@ -204,6 +233,48 @@ #define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ #endif -#define MULTI_PURPOSE_SOCKET_ADDR 0 + +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 + +#define MULTI_PURPOSE_SOCKET_ADDR 0x08000000 + +/*----------------------------------------------------------------------- + * NAND flash settings + */ +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define NAND_WAIT_READY(nand) NF_WaitRB() + +#define NAND_DISABLE_CE(nand) NF_SetCE(NFCE_HIGH) +#define NAND_ENABLE_CE(nand) NF_SetCE(NFCE_LOW) + + +#define WRITE_NAND_COMMAND(d, adr) NF_Cmd(d) +#define WRITE_NAND_COMMANDW(d, adr) NF_CmdW(d) +#define WRITE_NAND_ADDRESS(d, adr) NF_Addr(d) +#define WRITE_NAND(d, adr) NF_Write(d) +#define READ_NAND(adr) NF_Read() +/* the following functions are NOP's because S3C24X0 handles this in hardware */ +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) + +#define CONFIG_MTD_NAND_VERIFY_WRITE 1 +#define CONFIG_MTD_NAND_ECC_JFFS2 1 + +#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ #endif /* __CONFIG_H */ diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index d0ad65ef2c..a557bc6cf9 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -86,10 +86,14 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ +/* Use s3c2400's RTC */ +#define CONFIG_RTC_S3C24X0 1 + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL & ~CFG_CMD_CACHE) +#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ + CFG_CMD_DATE) #else -#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL) +#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | CFG_CMD_DATE) #endif #ifdef CONFIG_HWFLOW diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 65dd3fec25..0dcbbb063d 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -67,16 +67,29 @@ */ #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ +/************************************************************ + * RTC + ************************************************************/ +#define CONFIG_RTC_S3C24X0 1 + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 -#ifndef USE_920T_MMU -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_CACHE) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -#endif +/*********************************************************** + * Command definition + ***********************************************************/ +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + /*CFG_CMD_NAND |*/ \ + /*CFG_CMD_EEPROM |*/ \ + /*CFG_CMD_I2C |*/ \ + /*CFG_CMD_USB |*/ \ + CFG_CMD_REGINFO | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/trab.h b/include/configs/trab.h index 2466189a8a..15b6b19251 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -90,6 +90,9 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ +/* Use s3c2400's RTC */ +#define CONFIG_RTC_S3C24X0 1 + #ifdef CONFIG_HWFLOW #define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW #else @@ -105,11 +108,13 @@ #ifndef USE_920T_MMU #define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ CFG_CMD_BSP | \ + CFG_CMD_DATE | \ CONFIG_COMMANDS_ADD_HWFLOW | \ CONFIG_COMMANDS_ADD_VFD ) #else #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_BSP | \ + CFG_CMD_DATE | \ CONFIG_COMMANDS_ADD_HWFLOW | \ CONFIG_COMMANDS_ADD_VFD ) #endif diff --git a/include/s3c2400.h b/include/s3c2400.h index 08eb3bc448..6269117b0f 100644 --- a/include/s3c2400.h +++ b/include/s3c2400.h @@ -1,13 +1,138 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + /************************************************ * NAME : s3c2400.h - * Version : 3.7.2002 + * Version : 31.3.2003 * - * Based on 24x.h for the Samsung Development Board + * Based on S3C2400X User's manual Rev 1.1 ************************************************/ #ifndef __S3C2400_H__ #define __S3C2400_H__ +#define S3C24X0_UART_CHANNELS 2 +#define S3C24X0_SPI_CHANNELS 1 +#define PALETTE (0x14A00400) /* SJS */ + +typedef enum { + S3C24X0_UART0, + S3C24X0_UART1, +} S3C24X0_UARTS_NR; + +/* S3C2400 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x14000000 +#define S3C24X0_USB_HOST_BASE 0x14200000 +#define S3C24X0_INTERRUPT_BASE 0x14400000 +#define S3C24X0_DMA_BASE 0x14600000 +#define S3C24X0_CLOCK_POWER_BASE 0x14800000 +#define S3C24X0_LCD_BASE 0x14A00000 +#define S3C24X0_UART_BASE 0x15000000 +#define S3C24X0_TIMER_BASE 0x15100000 +#define S3C24X0_USB_DEVICE_BASE 0x15200140 +#define S3C24X0_WATCHDOG_BASE 0x15300000 +#define S3C24X0_I2C_BASE 0x15400000 +#define S3C24X0_I2S_BASE 0x15508000 +#define S3C24X0_GPIO_BASE 0x15600000 +#define S3C24X0_RTC_BASE 0x15700000 +#define S3C24X0_ADC_BASE 0x15800000 +#define S3C24X0_SPI_BASE 0x15900000 +#define S3C2400_MMC_BASE 0x15A00000 + +/* include common stuff */ +#include <s3c24x0.h> + + +static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) +{ + return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; +} +static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void) +{ + return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; +} +static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void) +{ + return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; +} +static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void) +{ + return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; +} +static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void) +{ + return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; +} +static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void) +{ + return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; +} +static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) +{ + return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); +} +static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void) +{ + return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; +} +static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void) +{ + return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; +} +static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void) +{ + return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; +} +static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void) +{ + return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; +} +static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void) +{ + return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; +} +static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void) +{ + return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; +} +static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void) +{ + return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; +} +static inline S3C2400_ADC * const S3C2400_GetBase_ADC(void) +{ + return (S3C2400_ADC * const)S3C24X0_ADC_BASE; +} +static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void) +{ + return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; +} +static inline S3C2400_MMC * const S3C2400_GetBase_MMC(void) +{ + return (S3C2400_MMC * const)S3C2400_MMC_BASE; +} + +#if 0 /* Memory control */ #define rBWSCON (*(volatile unsigned *)0x14000000) #define rBANKCON0 (*(volatile unsigned *)0x14000004) @@ -426,4 +551,5 @@ rINTPND;\ } /* Wait until rINTPND is changed for the case that the ISR is very short. */ +#endif #endif /*__S3C2400_H__*/ diff --git a/include/s3c2410.h b/include/s3c2410.h index abdebc12fb..86495f6289 100644 --- a/include/s3c2410.h +++ b/include/s3c2410.h @@ -1,493 +1,147 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + /************************************************ * NAME : s3c2410.h - * Version : 3.7.2002 + * Version : 31.3.2003 * - * Based on S3C2410X User's manual Rev 0.1 + * Based on S3C2410X User's manual Rev 1.1 ************************************************/ #ifndef __S3C2410_H__ #define __S3C2410_H__ +#define S3C24X0_UART_CHANNELS 3 +#define S3C24X0_SPI_CHANNELS 2 + +/* S3C2410 only supports 512 Byte HW ECC */ +#define S3C2410_ECCSIZE 512 +#define S3C2410_ECCBYTES 3 + +typedef enum { + S3C24X0_UART0, + S3C24X0_UART1, + S3C24X0_UART2 +} S3C24X0_UARTS_NR; + +/* S3C2410 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x48000000 +#define S3C24X0_USB_HOST_BASE 0x49000000 +#define S3C24X0_INTERRUPT_BASE 0x4A000000 +#define S3C24X0_DMA_BASE 0x4B000000 +#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 +#define S3C24X0_LCD_BASE 0x4D000000 +#define S3C2410_NAND_BASE 0x4E000000 +#define S3C24X0_UART_BASE 0x50000000 +#define S3C24X0_TIMER_BASE 0x51000000 +#define S3C24X0_USB_DEVICE_BASE 0x52000140 +#define S3C24X0_WATCHDOG_BASE 0x53000000 +#define S3C24X0_I2C_BASE 0x54000000 +#define S3C24X0_I2S_BASE 0x55000000 +#define S3C24X0_GPIO_BASE 0x56000000 +#define S3C24X0_RTC_BASE 0x57000000 +#define S3C2410_ADC_BASE 0x58000000 +#define S3C24X0_SPI_BASE 0x59000000 +#define S3C2410_SDI_BASE 0x5A000000 + + +/* include common stuff */ +#include <s3c24x0.h> + + +static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) +{ + return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; +} +static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void) +{ + return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; +} +static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void) +{ + return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; +} +static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void) +{ + return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; +} +static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void) +{ + return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; +} +static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void) +{ + return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; +} +static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void) +{ + return (S3C2410_NAND * const)S3C2410_NAND_BASE; +} +static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) +{ + return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); +} +static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void) +{ + return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; +} +static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void) +{ + return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; +} +static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void) +{ + return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; +} +static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void) +{ + return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; +} +static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void) +{ + return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; +} +static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void) +{ + return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; +} +static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void) +{ + return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; +} +static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void) +{ + return (S3C2410_ADC * const)S3C2410_ADC_BASE; +} +static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void) +{ + return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; +} +static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void) +{ + return (S3C2410_SDI * const)S3C2410_SDI_BASE; +} -/* Memory control */ -#define rBWSCON (*(volatile unsigned *)0x48000000) -#define rBANKCON0 (*(volatile unsigned *)0x48000004) -#define rBANKCON1 (*(volatile unsigned *)0x48000008) -#define rBANKCON2 (*(volatile unsigned *)0x4800000C) -#define rBANKCON3 (*(volatile unsigned *)0x48000010) -#define rBANKCON4 (*(volatile unsigned *)0x48000014) -#define rBANKCON5 (*(volatile unsigned *)0x48000018) -#define rBANKCON6 (*(volatile unsigned *)0x4800001C) -#define rBANKCON7 (*(volatile unsigned *)0x48000020) -#define rREFRESH (*(volatile unsigned *)0x48000024) -#define rBANKSIZE (*(volatile unsigned *)0x48000028) -#define rMRSRB6 (*(volatile unsigned *)0x4800002C) -#define rMRSRB7 (*(volatile unsigned *)0x48000030) - - -/* USB HOST */ -#define rHcRevision (*(volatile unsigned *)0x49000000) -#define rHcControl (*(volatile unsigned *)0x49000004) -#define rHcCommonStatus (*(volatile unsigned *)0x49000008) -#define rHcInterruptStatus (*(volatile unsigned *)0x4900000C) -#define rHcInterruptEnable (*(volatile unsigned *)0x49000010) -#define rHcInterruptDisable (*(volatile unsigned *)0x49000014) -#define rHcHCCA (*(volatile unsigned *)0x49000018) -#define rHcPeriodCuttendED (*(volatile unsigned *)0x4900001C) -#define rHcControlHeadED (*(volatile unsigned *)0x49000020) -#define rHcControlCurrentED (*(volatile unsigned *)0x49000024) -#define rHcBulkHeadED (*(volatile unsigned *)0x49000028) -#define rHcBuldCurrentED (*(volatile unsigned *)0x4900002C) -#define rHcDoneHead (*(volatile unsigned *)0x49000030) -#define rHcRmInterval (*(volatile unsigned *)0x49000034) -#define rHcFmRemaining (*(volatile unsigned *)0x49000038) -#define rHcFmNumber (*(volatile unsigned *)0x4900003C) -#define rHcPeriodicStart (*(volatile unsigned *)0x49000040) -#define rHcLSThreshold (*(volatile unsigned *)0x49000044) -#define rHcRhDescriptorA (*(volatile unsigned *)0x49000048) -#define rHcRhDescriptorB (*(volatile unsigned *)0x4900004C) -#define rHcRhStatus (*(volatile unsigned *)0x49000050) -#define rHcRhPortStatus1 (*(volatile unsigned *)0x49000054) -#define rHcRhPortStatus2 (*(volatile unsigned *)0x49000058) - - -/* INTERRUPT */ -#define rSRCPND (*(volatile unsigned *)0x4A000000) -#define rINTMOD (*(volatile unsigned *)0x4A000004) -#define rINTMSK (*(volatile unsigned *)0x4A000008) -#define rPRIORITY (*(volatile unsigned *)0x4A00000C) -#define rINTPND (*(volatile unsigned *)0x4A000010) -#define rINTOFFSET (*(volatile unsigned *)0x4A000014) -#define rSUBSRCPND (*(volatile unsigned *)0x4A000018) -#define rINTSUBMSK (*(volatile unsigned *)0x4A00001C) - - -/* DMA */ -#define rDISRC0 (*(volatile unsigned *)0x4B000000) -#define rDISRCC0 (*(volatile unsigned *)0x4B000004) -#define rDIDST0 (*(volatile unsigned *)0x4B000008) -#define rDIDSTC0 (*(volatile unsigned *)0x4B00000C) -#define rDCON0 (*(volatile unsigned *)0x4B000010) -#define rDSTAT0 (*(volatile unsigned *)0x4B000014) -#define rDCSRC0 (*(volatile unsigned *)0x4B000018) -#define rDCDST0 (*(volatile unsigned *)0x4B00001C) -#define rDMASKTRIG0 (*(volatile unsigned *)0x4B000020) -#define rDISRC1 (*(volatile unsigned *)0x4B000040) -#define rDISRCC1 (*(volatile unsigned *)0x4B000044) -#define rDIDST1 (*(volatile unsigned *)0x4B000048) -#define rDIDSTC1 (*(volatile unsigned *)0x4B00004C) -#define rDCON1 (*(volatile unsigned *)0x4B000050) -#define rDSTAT1 (*(volatile unsigned *)0x4B000054) -#define rDCSRC1 (*(volatile unsigned *)0x4B000058) -#define rDCDST1 (*(volatile unsigned *)0x4B00005C) -#define rDMASKTRIG1 (*(volatile unsigned *)0x4B000060) -#define rDISRC2 (*(volatile unsigned *)0x4B000080) -#define rDISRCC2 (*(volatile unsigned *)0x4B000084) -#define rDIDST2 (*(volatile unsigned *)0x4B000088) -#define rDIDSTC2 (*(volatile unsigned *)0x4B00008C) -#define rDCON2 (*(volatile unsigned *)0x4B000090) -#define rDSTAT2 (*(volatile unsigned *)0x4B000094) -#define rDCSRC2 (*(volatile unsigned *)0x4B000098) -#define rDCDST2 (*(volatile unsigned *)0x4B00009C) -#define rDMASKTRIG2 (*(volatile unsigned *)0x4B0000A0) -#define rDISRC3 (*(volatile unsigned *)0x4B0000C0) -#define rDISRCC3 (*(volatile unsigned *)0x4B0000C4) -#define rDIDST3 (*(volatile unsigned *)0x4B0000C8) -#define rDIDSTC3 (*(volatile unsigned *)0x4B0000CC) -#define rDCON3 (*(volatile unsigned *)0x4B0000D0) -#define rDSTAT3 (*(volatile unsigned *)0x4B0000D4) -#define rDCSRC3 (*(volatile unsigned *)0x4B0000D8) -#define rDCDST3 (*(volatile unsigned *)0x4B0000DC) -#define rDMASKTRIG3 (*(volatile unsigned *)0x4B0000E0) - - -/* CLOCK & POWER MANAGEMENT */ -#define rLOCKTIME (*(volatile unsigned *)0x4C000000) -#define rMPLLCON (*(volatile unsigned *)0x4C000004) -#define rUPLLCON (*(volatile unsigned *)0x4C000008) -#define rCLKCON (*(volatile unsigned *)0x4C00000C) -#define rCLKSLOW (*(volatile unsigned *)0x4C000010) -#define rCLKDIVN (*(volatile unsigned *)0x4C000014) - - -/* LCD CONTROLLER */ -#define rLCDCON1 (*(volatile unsigned *)0x4D000000) -#define rLCDCON2 (*(volatile unsigned *)0x4D000004) -#define rLCDCON3 (*(volatile unsigned *)0x4D000008) -#define rLCDCON4 (*(volatile unsigned *)0x4D00000C) -#define rLCDCON5 (*(volatile unsigned *)0x4D000010) -#define rLCDSADDR1 (*(volatile unsigned *)0x4D000014) -#define rLCDSADDR2 (*(volatile unsigned *)0x4D000018) -#define rLCDSADDR3 (*(volatile unsigned *)0x4D00001C) -#define rREDLUT (*(volatile unsigned *)0x4D000020) -#define rGREENLUT (*(volatile unsigned *)0x4D000024) -#define rBLUELUT (*(volatile unsigned *)0x4D000028) -#define rDITHMODE (*(volatile unsigned *)0x4D00004C) -#define rTPAL (*(volatile unsigned *)0x4D000050) -#define rLCDINTPND (*(volatile unsigned *)0x4D000054) -#define rLCDSRCPND (*(volatile unsigned *)0x4D000058) -#define rLCDINTMSK (*(volatile unsigned *)0x4D00005C) - - -/* NAND FLASH */ -#define rNFCONF (*(volatile unsigned *)0x4E000000) -#define rNFCMD (*(volatile unsigned *)0x4E000004) -#define rNFADDR (*(volatile unsigned *)0x4E000008) -#define rNFDATA (*(volatile unsigned *)0x4E00000C) -#define rNFSTAT (*(volatile unsigned *)0x4E000010) -#define rNFECC (*(volatile unsigned *)0x4E000014) - - -/* UART */ -#define rULCON0 (*(volatile unsigned *)0x50000000) -#define rUCON0 (*(volatile unsigned *)0x50000004) -#define rUFCON0 (*(volatile unsigned *)0x50000008) -#define rUMCON0 (*(volatile unsigned *)0x5000000C) -#define rUTRSTAT0 (*(volatile unsigned *)0x50000010) -#define rUERSTAT0 (*(volatile unsigned *)0x50000014) -#define rUFSTAT0 (*(volatile unsigned *)0x50000018) -#define rUMSTAT0 (*(volatile unsigned *)0x5000001C) -#define rUBRDIV0 (*(volatile unsigned *)0x50000028) - -#define rULCON1 (*(volatile unsigned *)0x50004000) -#define rUCON1 (*(volatile unsigned *)0x50004004) -#define rUFCON1 (*(volatile unsigned *)0x50004008) -#define rUMCON1 (*(volatile unsigned *)0x5000400C) -#define rUTRSTAT1 (*(volatile unsigned *)0x50004010) -#define rUERSTAT1 (*(volatile unsigned *)0x50004014) -#define rUFSTAT1 (*(volatile unsigned *)0x50004018) -#define rUMSTAT1 (*(volatile unsigned *)0x5000401C) -#define rUBRDIV1 (*(volatile unsigned *)0x50004028) - -#define rULCON2 (*(volatile unsigned *)0x50008000) -#define rUCON2 (*(volatile unsigned *)0x50008004) -#define rUFCON2 (*(volatile unsigned *)0x50008008) -#define rUTRSTAT2 (*(volatile unsigned *)0x50008010) -#define rUERSTAT2 (*(volatile unsigned *)0x50008014) -#define rUFSTAT2 (*(volatile unsigned *)0x50008018) -#define rUBRDIV2 (*(volatile unsigned *)0x50008028) - -#ifdef __BIG_ENDIAN -#define rUTXH0 (*(volatile unsigned char *)0x50000023) -#define rURXH0 (*(volatile unsigned char *)0x50000027) -#define rUTXH1 (*(volatile unsigned char *)0x50004023) -#define rURXH1 (*(volatile unsigned char *)0x50004027) -#define rUTXH2 (*(volatile unsigned char *)0x50008023) -#define rURXH2 (*(volatile unsigned char *)0x50008027) - -#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch) -#define RdURXH0() (*(volatile unsigned char *)0x50000027) -#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch) -#define RdURXH1() (*(volatile unsigned char *)0x50004027) -#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch) -#define RdURXH2() (*(volatile unsigned char *)0x50008027) - -#define UTXH0 (0x50000020+3) /* byte_access address by DMA */ -#define URXH0 (0x50000024+3) -#define UTXH1 (0x50004020+3) -#define URXH1 (0x50004024+3) -#define UTXH2 (0x50008020+3) -#define URXH2 (0x50008024+3) - -#else /* Little Endian */ -#define rUTXH0 (*(volatile unsigned char *)0x50000020) -#define rURXH0 (*(volatile unsigned char *)0x50000024) -#define rUTXH1 (*(volatile unsigned char *)0x50004020) -#define rURXH1 (*(volatile unsigned char *)0x50004024) -#define rUTXH2 (*(volatile unsigned char *)0x50008020) -#define rURXH2 (*(volatile unsigned char *)0x50008024) - -#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch) -#define RdURXH0() (*(volatile unsigned char *)0x50000024) -#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch) -#define RdURXH1() (*(volatile unsigned char *)0x50004024) -#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch) -#define RdURXH2() (*(volatile unsigned char *)0x50008024) - -#define UTXH0 (0x50000020) /* byte_access address by DMA */ -#define URXH0 (0x50000024) -#define UTXH1 (0x50004020) -#define URXH1 (0x50004024) -#define UTXH2 (0x50008020) -#define URXH2 (0x50008024) -#endif - - -/* PWM TIMER */ -#define rTCFG0 (*(volatile unsigned *)0x51000000) -#define rTCFG1 (*(volatile unsigned *)0x51000004) -#define rTCON (*(volatile unsigned *)0x51000008) -#define rTCNTB0 (*(volatile unsigned *)0x5100000C) -#define rTCMPB0 (*(volatile unsigned *)0x51000010) -#define rTCNTO0 (*(volatile unsigned *)0x51000014) -#define rTCNTB1 (*(volatile unsigned *)0x51000018) -#define rTCMPB1 (*(volatile unsigned *)0x5100001C) -#define rTCNTO1 (*(volatile unsigned *)0x51000020) -#define rTCNTB2 (*(volatile unsigned *)0x51000024) -#define rTCMPB2 (*(volatile unsigned *)0x51000028) -#define rTCNTO2 (*(volatile unsigned *)0x5100002C) -#define rTCNTB3 (*(volatile unsigned *)0x51000030) -#define rTCMPB3 (*(volatile unsigned *)0x51000034) -#define rTCNTO3 (*(volatile unsigned *)0x51000038) -#define rTCNTB4 (*(volatile unsigned *)0x5100003C) -#define rTCNTO4 (*(volatile unsigned *)0x51000040) - - -/* USB DEVICE */ -#ifdef __BIG_ENDIAN -#define rFUNC_ADDR_REG (*(volatile unsigned char *)0x52000143) -#define rPWR_REG (*(volatile unsigned char *)0x52000147) -#define rEP_INT_REG (*(volatile unsigned char *)0x5200014B) -#define rUSB_INT_REG (*(volatile unsigned char *)0x5200015B) -#define rEP_INT_EN_REG (*(volatile unsigned char *)0x5200015F) -#define rUSB_INT_EN_REG (*(volatile unsigned char *)0x5200016F) -#define rFRAME_NUM1_REG (*(volatile unsigned char *)0x52000173) -#define rFRAME_NUM2_REG (*(volatile unsigned char *)0x52000177) -#define rINDEX_REG (*(volatile unsigned char *)0x5200017B) -#define rMAXP_REG (*(volatile unsigned char *)0x52000183) -#define rEP0_CSR (*(volatile unsigned char *)0x52000187) -#define rIN_CSR1_REG (*(volatile unsigned char *)0x52000187) -#define rIN_CSR2_REG (*(volatile unsigned char *)0x5200018B) -#define rOUT_CSR1_REG (*(volatile unsigned char *)0x52000193) -#define rOUT_CSR2_REG (*(volatile unsigned char *)0x52000197) -#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x5200019B) -#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019F) -#define rEP0_FIFO (*(volatile unsigned char *)0x520001C3) -#define rEP1_FIFO (*(volatile unsigned char *)0x520001C7) -#define rEP2_FIFO (*(volatile unsigned char *)0x520001CB) -#define rEP3_FIFO (*(volatile unsigned char *)0x520001CF) -#define rEP4_FIFO (*(volatile unsigned char *)0x520001D3) -#define rEP1_DMA_CON (*(volatile unsigned char *)0x52000203) -#define rEP1_DMA_UNIT (*(volatile unsigned char *)0x52000207) -#define rEP1_DMA_FIFO (*(volatile unsigned char *)0x5200020B) -#define rEP1_DMA_TX_LO (*(volatile unsigned char *)0x5200020F) -#define rEP1_DMA_TX_MD (*(volatile unsigned char *)0x52000213) -#define rEP1_DMA_TX_HI (*(volatile unsigned char *)0x52000217) -#define rEP2_DMA_CON (*(volatile unsigned char *)0x5200021B) -#define rEP2_DMA_UNIT (*(volatile unsigned char *)0x5200021F) -#define rEP2_DMA_FIFO (*(volatile unsigned char *)0x52000223) -#define rEP2_DMA_TX_LO (*(volatile unsigned char *)0x52000227) -#define rEP2_DMA_TX_MD (*(volatile unsigned char *)0x5200022B) -#define rEP2_DMA_TX_HI (*(volatile unsigned char *)0x5200022F) -#define rEP3_DMA_CON (*(volatile unsigned char *)0x52000243) -#define rEP3_DMA_UNIT (*(volatile unsigned char *)0x52000247) -#define rEP3_DMA_FIFO (*(volatile unsigned char *)0x5200024B) -#define rEP3_DMA_TX_LO (*(volatile unsigned char *)0x5200024F) -#define rEP3_DMA_TX_MD (*(volatile unsigned char *)0x52000253) -#define rEP3_DMA_TX_HI (*(volatile unsigned char *)0x52000257) -#define rEP4_DMA_CON (*(volatile unsigned char *)0x5200025B) -#define rEP4_DMA_UNIT (*(volatile unsigned char *)0x5200025F) -#define rEP4_DMA_FIFO (*(volatile unsigned char *)0x52000263) -#define rEP4_DMA_TX_LO (*(volatile unsigned char *)0x52000267) -#define rEP4_DMA_TX_MD (*(volatile unsigned char *)0x5200026B) -#define rEP4_DMA_TX_HI (*(volatile unsigned char *)0x5200026F) -#else /* little endian */ -#define rFUNC_ADDR_REG (*(volatile unsigned char *)0x52000140) -#define rPWR_REG (*(volatile unsigned char *)0x52000144) -#define rEP_INT_REG (*(volatile unsigned char *)0x52000148) -#define rUSB_INT_REG (*(volatile unsigned char *)0x52000158) -#define rEP_INT_EN_REG (*(volatile unsigned char *)0x5200015C) -#define rUSB_INT_EN_REG (*(volatile unsigned char *)0x5200016C) -#define rFRAME_NUM1_REG (*(volatile unsigned char *)0x52000170) -#define rFRAME_NUM2_REG (*(volatile unsigned char *)0x52000174) -#define rINDEX_REG (*(volatile unsigned char *)0x52000178) -#define rMAXP_REG (*(volatile unsigned char *)0x52000180) -#define rEP0_CSR (*(volatile unsigned char *)0x52000184) -#define rIN_CSR1_REG (*(volatile unsigned char *)0x52000184) -#define rIN_CSR2_REG (*(volatile unsigned char *)0x52000188) -#define rOUT_CSR1_REG (*(volatile unsigned char *)0x52000190) -#define rOUT_CSR2_REG (*(volatile unsigned char *)0x52000194) -#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) -#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019C) -#define rEP0_FIFO (*(volatile unsigned char *)0x520001C0) -#define rEP1_FIFO (*(volatile unsigned char *)0x520001C4) -#define rEP2_FIFO (*(volatile unsigned char *)0x520001C8) -#define rEP3_FIFO (*(volatile unsigned char *)0x520001CC) -#define rEP4_FIFO (*(volatile unsigned char *)0x520001D0) -#define rEP1_DMA_CON (*(volatile unsigned char *)0x52000200) -#define rEP1_DMA_UNIT (*(volatile unsigned char *)0x52000204) -#define rEP1_DMA_FIFO (*(volatile unsigned char *)0x52000208) -#define rEP1_DMA_TX_LO (*(volatile unsigned char *)0x5200020C) -#define rEP1_DMA_TX_MD (*(volatile unsigned char *)0x52000210) -#define rEP1_DMA_TX_HI (*(volatile unsigned char *)0x52000214) -#define rEP2_DMA_CON (*(volatile unsigned char *)0x52000218) -#define rEP2_DMA_UNIT (*(volatile unsigned char *)0x5200021C) -#define rEP2_DMA_FIFO (*(volatile unsigned char *)0x52000220) -#define rEP2_DMA_TX_LO (*(volatile unsigned char *)0x52000224) -#define rEP2_DMA_TX_MD (*(volatile unsigned char *)0x52000228) -#define rEP2_DMA_TX_HI (*(volatile unsigned char *)0x5200022C) -#define rEP3_DMA_CON (*(volatile unsigned char *)0x52000240) -#define rEP3_DMA_UNIT (*(volatile unsigned char *)0x52000244) -#define rEP3_DMA_FIFO (*(volatile unsigned char *)0x52000248) -#define rEP3_DMA_TX_LO (*(volatile unsigned char *)0x5200024C) -#define rEP3_DMA_TX_MD (*(volatile unsigned char *)0x52000250) -#define rEP3_DMA_TX_HI (*(volatile unsigned char *)0x52000254) -#define rEP4_DMA_CON (*(volatile unsigned char *)0x52000258) -#define rEP4_DMA_UNIT (*(volatile unsigned char *)0x5200025C) -#define rEP4_DMA_FIFO (*(volatile unsigned char *)0x52000260) -#define rEP4_DMA_TX_LO (*(volatile unsigned char *)0x52000264) -#define rEP4_DMA_TX_MD (*(volatile unsigned char *)0x52000268) -#define rEP4_DMA_TX_HI (*(volatile unsigned char *)0x5200026C) -#endif /* __BIG_ENDIAN */ - -/* WATCH DOG TIMER */ -#define rWTCON (*(volatile unsigned *)0x53000000) -#define rWTDAT (*(volatile unsigned *)0x53000004) -#define rWTCNT (*(volatile unsigned *)0x53000008) - - -/* IIC */ -#define rIICCON (*(volatile unsigned *)0x54000000) -#define rIICSTAT (*(volatile unsigned *)0x54000004) -#define rIICADD (*(volatile unsigned *)0x54000008) -#define rIICDS (*(volatile unsigned *)0x5400000C) - - -/* IIS */ -#define rIISCON (*(volatile unsigned *)0x55000000) -#define rIISMOD (*(volatile unsigned *)0x55000004) -#define rIISPSR (*(volatile unsigned *)0x55000008) -#define rIISFCON (*(volatile unsigned *)0x5500000C) - -#ifdef __BIG_ENDIAN -#define IISFIF ((volatile unsigned short *)0x55000012) -#else /* little endian */ -#define IISFIF ((volatile unsigned short *)0x55000010) -#endif - - -/* I/O PORT */ -#define rGPACON (*(volatile unsigned *)0x56000000) -#define rGPADAT (*(volatile unsigned *)0x56000004) - -#define rGPBCON (*(volatile unsigned *)0x56000010) -#define rGPBDAT (*(volatile unsigned *)0x56000014) -#define rGPBUP (*(volatile unsigned *)0x56000018) - -#define rGPCCON (*(volatile unsigned *)0x56000020) -#define rGPCDAT (*(volatile unsigned *)0x56000024) -#define rGPCUP (*(volatile unsigned *)0x56000028) - -#define rGPDCON (*(volatile unsigned *)0x56000030) -#define rGPDDAT (*(volatile unsigned *)0x56000034) -#define rGPDUP (*(volatile unsigned *)0x56000038) - -#define rGPECON (*(volatile unsigned *)0x56000040) -#define rGPEDAT (*(volatile unsigned *)0x56000044) -#define rGPEUP (*(volatile unsigned *)0x56000048) - -#define rGPFCON (*(volatile unsigned *)0x56000050) -#define rGPFDAT (*(volatile unsigned *)0x56000054) -#define rGPFUP (*(volatile unsigned *)0x56000058) - -#define rGPGCON (*(volatile unsigned *)0x56000060) -#define rGPGDAT (*(volatile unsigned *)0x56000064) -#define rGPGUP (*(volatile unsigned *)0x56000068) - -#define rGPHCON (*(volatile unsigned *)0x56000070) -#define rGPHDAT (*(volatile unsigned *)0x56000074) -#define rGPHUP (*(volatile unsigned *)0x56000078) - -#define rMISCCR (*(volatile unsigned *)0x56000080) -#define rDCLKCON (*(volatile unsigned *)0x56000084) -#define rEXTINT0 (*(volatile unsigned *)0x56000088) -#define rEXTINT1 (*(volatile unsigned *)0x5600008C) -#define rEXTINT2 (*(volatile unsigned *)0x56000090) -#define rEINTFLT0 (*(volatile unsigned *)0x56000094) -#define rEINTFLT1 (*(volatile unsigned *)0x56000098) -#define rEINTFLT2 (*(volatile unsigned *)0x5600009C) -#define rEINTFLT3 (*(volatile unsigned *)0x560000A0) -#define rEINTMASK (*(volatile unsigned *)0x560000A4) -#define rEINTPEND (*(volatile unsigned *)0x560000A8) -#define rGSTATUS0 (*(volatile unsigned *)0x560000AC) -#define rGSTATUS1 (*(volatile unsigned *)0x560000B0) - - -/* RTC */ -#ifdef __BIG_ENDIAN -#define rRTCCON (*(volatile unsigned char *)0x57000043) -#define rTICNT (*(volatile unsigned char *)0x57000047) -#define rRTCALM (*(volatile unsigned char *)0x57000053) -#define rALMSEC (*(volatile unsigned char *)0x57000057) -#define rALMMIN (*(volatile unsigned char *)0x5700005B) -#define rALMHOUR (*(volatile unsigned char *)0x5700005F) -#define rALMDATE (*(volatile unsigned char *)0x57000063) -#define rALMMON (*(volatile unsigned char *)0x57000067) -#define rALMYEAR (*(volatile unsigned char *)0x5700006B) -#define rRTCRST (*(volatile unsigned char *)0x5700006F) -#define rBCDSEC (*(volatile unsigned char *)0x57000073) -#define rBCDMIN (*(volatile unsigned char *)0x57000077) -#define rBCDHOUR (*(volatile unsigned char *)0x5700007B) -#define rBCDDATE (*(volatile unsigned char *)0x5700007F) -#define rBCDDAY (*(volatile unsigned char *)0x57000083) -#define rBCDMON (*(volatile unsigned char *)0x57000087) -#define rBCDYEAR (*(volatile unsigned char *)0x5700008B) -#else /* little endian */ -#define rRTCCON (*(volatile unsigned char *)0x57000040) -#define rTICNT (*(volatile unsigned char *)0x57000044) -#define rRTCALM (*(volatile unsigned char *)0x57000050) -#define rALMSEC (*(volatile unsigned char *)0x57000054) -#define rALMMIN (*(volatile unsigned char *)0x57000058) -#define rALMHOUR (*(volatile unsigned char *)0x5700005C) -#define rALMDATE (*(volatile unsigned char *)0x57000060) -#define rALMMON (*(volatile unsigned char *)0x57000064) -#define rALMYEAR (*(volatile unsigned char *)0x57000068) -#define rRTCRST (*(volatile unsigned char *)0x5700006C) -#define rBCDSEC (*(volatile unsigned char *)0x57000070) -#define rBCDMIN (*(volatile unsigned char *)0x57000074) -#define rBCDHOUR (*(volatile unsigned char *)0x57000078) -#define rBCDDATE (*(volatile unsigned char *)0x5700007C) -#define rBCDDAY (*(volatile unsigned char *)0x57000080) -#define rBCDMON (*(volatile unsigned char *)0x57000084) -#define rBCDYEAR (*(volatile unsigned char *)0x57000088) -#endif - - -/* ADC */ -#define rADCCON (*(volatile unsigned *)0x58000000) -#define rADCTSC (*(volatile unsigned *)0x58000004) -#define rADCDLY (*(volatile unsigned *)0x58000008) -#define rADCDAT0 (*(volatile unsigned *)0x5800000C) -#define rADCDAT1 (*(volatile unsigned *)0x58000010) - - -/* SPI */ -#define rSPCON0 (*(volatile unsigned *)0x59000000) -#define rSPSTA0 (*(volatile unsigned *)0x59000004) -#define rSPPIN0 (*(volatile unsigned *)0x59000008) -#define rSPPRE0 (*(volatile unsigned *)0x5900000C) -#define rSPTDAT0 (*(volatile unsigned *)0x59000010) -#define rSPRDAT0 (*(volatile unsigned *)0x59000014) -#define rSPCON1 (*(volatile unsigned *)0x59000020) -#define rSPSTA1 (*(volatile unsigned *)0x59000024) -#define rSPPIN1 (*(volatile unsigned *)0x59000028) -#define rSPPRE1 (*(volatile unsigned *)0x5900002C) -#define rSPTDAT1 (*(volatile unsigned *)0x59000030) -#define rSPRDAT1 (*(volatile unsigned *)0x59000034) - - -/* SD INTERFACE */ -#define rSDICON (*(volatile unsigned *)0x5A000000) -#define rSDIPRE (*(volatile unsigned *)0x5A000004) -#define rSDICmdArg (*(volatile unsigned *)0x5A000008) -#define rSDICmdCon (*(volatile unsigned *)0x5A00000C) -#define rSDICmdSta (*(volatile unsigned *)0x5A000010) -#define rSDIRSP0 (*(volatile unsigned *)0x5A000014) -#define rSDIRSP1 (*(volatile unsigned *)0x5A000018) -#define rSDIRSP2 (*(volatile unsigned *)0x5A00001C) -#define rSDIRSP3 (*(volatile unsigned *)0x5A000020) -#define rSDIDTimer (*(volatile unsigned *)0x5A000024) -#define rSDIBSize (*(volatile unsigned *)0x5A000028) -#define rSDIDatCon (*(volatile unsigned *)0x5A00002C) -#define rSDIDatCnt (*(volatile unsigned *)0x5A000030) -#define rSDIDatSta (*(volatile unsigned *)0x5A000034) -#define rSDIFSTA (*(volatile unsigned *)0x5A000038) -#ifdef __BIG_ENDIAN -#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) -#else -#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) -#endif -#define rSDIIntMsk (*(volatile unsigned *)0x5A000040) /* ISR */ #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) diff --git a/include/s3c24x0.h b/include/s3c24x0.h new file mode 100644 index 0000000000..78a79811f5 --- /dev/null +++ b/include/s3c24x0.h @@ -0,0 +1,1135 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c24x0.h + * Version : 31.3.2003 + * + * common stuff for SAMSUNG S3C24X0 SoC + ************************************************/ + +#ifndef __S3C24X0_H__ +#define __S3C24X0_H__ + +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; + +/* Memory controller (see manual chapter 5) */ +typedef struct { + S3C24X0_REG32 BWSCON; + S3C24X0_REG32 BANKCON[8]; + S3C24X0_REG32 REFRESH; + S3C24X0_REG32 BANKSIZE; + S3C24X0_REG32 MRSRB6; + S3C24X0_REG32 MRSRB7; +} /*__attribute__((__packed__))*/ S3C24X0_MEMCTL; + + +/* USB HOST (see manual chapter 12) */ +typedef struct { + S3C24X0_REG32 HcRevision; + S3C24X0_REG32 HcControl; + S3C24X0_REG32 HcCommonStatus; + S3C24X0_REG32 HcInterruptStatus; + S3C24X0_REG32 HcInterruptEnable; + S3C24X0_REG32 HcInterruptDisable; + S3C24X0_REG32 HcHCCA; + S3C24X0_REG32 HcPeriodCuttendED; + S3C24X0_REG32 HcControlHeadED; + S3C24X0_REG32 HcControlCurrentED; + S3C24X0_REG32 HcBulkHeadED; + S3C24X0_REG32 HcBuldCurrentED; + S3C24X0_REG32 HcDoneHead; + S3C24X0_REG32 HcRmInterval; + S3C24X0_REG32 HcFmRemaining; + S3C24X0_REG32 HcFmNumber; + S3C24X0_REG32 HcPeriodicStart; + S3C24X0_REG32 HcLSThreshold; + S3C24X0_REG32 HcRhDescriptorA; + S3C24X0_REG32 HcRhDescriptorB; + S3C24X0_REG32 HcRhStatus; + S3C24X0_REG32 HcRhPortStatus1; + S3C24X0_REG32 HcRhPortStatus2; +} /*__attribute__((__packed__))*/ S3C24X0_USB_HOST; + + +/* INTERRUPT (see manual chapter 14) */ +typedef struct { + S3C24X0_REG32 SRCPND; + S3C24X0_REG32 INTMOD; + S3C24X0_REG32 INTMSK; + S3C24X0_REG32 PRIORITY; + S3C24X0_REG32 INTPND; + S3C24X0_REG32 INTOFFSET; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 SUBSRCPND; + S3C24X0_REG32 INTSUBMSK; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_INTERRUPT; + + +/* DMAS (see manual chapter 8) */ +typedef struct { + S3C24X0_REG32 DISRC; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 DISRCC; +#endif + S3C24X0_REG32 DIDST; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 DIDSTC; +#endif + S3C24X0_REG32 DCON; + S3C24X0_REG32 DSTAT; + S3C24X0_REG32 DCSRC; + S3C24X0_REG32 DCDST; + S3C24X0_REG32 DMASKTRIG; +#ifdef CONFIG_S3C2400 + S3C24X0_REG32 res[1]; +#endif +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 res[7]; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_DMA; + +typedef struct { + S3C24X0_DMA dma[4]; +} /*__attribute__((__packed__))*/ S3C24X0_DMAS; + + +/* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ +/* (see S3C2410 manual chapter 7) */ +typedef struct { + S3C24X0_REG32 LOCKTIME; + S3C24X0_REG32 MPLLCON; + S3C24X0_REG32 UPLLCON; + S3C24X0_REG32 CLKCON; + S3C24X0_REG32 CLKSLOW; + S3C24X0_REG32 CLKDIVN; +} /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER; + + +/* LCD CONTROLLER (see manual chapter 15) */ +typedef struct { + S3C24X0_REG32 LCDCON1; + S3C24X0_REG32 LCDCON2; + S3C24X0_REG32 LCDCON3; + S3C24X0_REG32 LCDCON4; + S3C24X0_REG32 LCDCON5; + S3C24X0_REG32 LCDSADDR1; + S3C24X0_REG32 LCDSADDR2; + S3C24X0_REG32 LCDSADDR3; + S3C24X0_REG32 REDLUT; + S3C24X0_REG32 GREENLUT; + S3C24X0_REG32 BLUELUT; + S3C24X0_REG32 res[8]; + S3C24X0_REG32 DITHMODE; + S3C24X0_REG32 TPAL; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 LCDINTPND; + S3C24X0_REG32 LCDSRCPND; + S3C24X0_REG32 LCDINTMSK; + S3C24X0_REG32 LPCSEL; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_LCD; + + +/* NAND FLASH (see S3C2410 manual chapter 6) */ +typedef struct { + S3C24X0_REG32 NFCONF; + S3C24X0_REG32 NFCMD; + S3C24X0_REG32 NFADDR; + S3C24X0_REG32 NFDATA; + S3C24X0_REG32 NFSTAT; + S3C24X0_REG32 NFECC; +} /*__attribute__((__packed__))*/ S3C2410_NAND; + + +/* UART (see manual chapter 11) */ +typedef struct { + S3C24X0_REG32 ULCON; + S3C24X0_REG32 UCON; + S3C24X0_REG32 UFCON; + S3C24X0_REG32 UMCON; + S3C24X0_REG32 UTRSTAT; + S3C24X0_REG32 UERSTAT; + S3C24X0_REG32 UFSTAT; + S3C24X0_REG32 UMSTAT; +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 UTXH; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 URXH; +#else /* Little Endian */ + S3C24X0_REG8 UTXH; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 URXH; + S3C24X0_REG8 res2[3]; +#endif + S3C24X0_REG32 UBRDIV; +} /*__attribute__((__packed__))*/ S3C24X0_UART; + + +/* PWM TIMER (see manual chapter 10) */ +typedef struct { + S3C24X0_REG32 TCNTB; + S3C24X0_REG32 TCMPB; + S3C24X0_REG32 TCNTO; +} /*__attribute__((__packed__))*/ S3C24X0_TIMER; + +typedef struct { + S3C24X0_REG32 TCFG0; + S3C24X0_REG32 TCFG1; + S3C24X0_REG32 TCON; + S3C24X0_TIMER ch[4]; + S3C24X0_REG32 TCNTB4; + S3C24X0_REG32 TCNTO4; +} /*__attribute__((__packed__))*/ S3C24X0_TIMERS; + + +/* USB DEVICE (see manual chapter 13) */ +typedef struct { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res[3]; + S3C24X0_REG8 EP_FIFO_REG; +#else /* little endian */ + S3C24X0_REG8 EP_FIFO_REG; + S3C24X0_REG8 res[3]; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_USB_DEV_FIFOS; + +typedef struct { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 EP_DMA_CON; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 EP_DMA_UNIT; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 EP_DMA_FIFO; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 EP_DMA_TTC_L; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 EP_DMA_TTC_M; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 EP_DMA_TTC_H; +#else /* little endian */ + S3C24X0_REG8 EP_DMA_CON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 EP_DMA_UNIT; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 EP_DMA_FIFO; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 EP_DMA_TTC_L; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 EP_DMA_TTC_M; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 EP_DMA_TTC_H; + S3C24X0_REG8 res6[3]; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_USB_DEV_DMAS; + +typedef struct { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 FUNC_ADDR_REG; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 PWR_REG; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 EP_INT_REG; + S3C24X0_REG8 res4[15]; + S3C24X0_REG8 USB_INT_REG; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 EP_INT_EN_REG; + S3C24X0_REG8 res6[15]; + S3C24X0_REG8 USB_INT_EN_REG; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 FRAME_NUM1_REG; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 FRAME_NUM2_REG; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 INDEX_REG; + S3C24X0_REG8 res10[7]; + S3C24X0_REG8 MAXP_REG; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 IN_CSR2_REG; + S3C24X0_REG8 res13[7]; + S3C24X0_REG8 OUT_CSR1_REG; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 OUT_CSR2_REG; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 OUT_FIFO_CNT1_REG; + S3C24X0_REG8 res16[3]; + S3C24X0_REG8 OUT_FIFO_CNT2_REG; +#else /* little endian */ + S3C24X0_REG8 FUNC_ADDR_REG; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 PWR_REG; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 EP_INT_REG; + S3C24X0_REG8 res3[15]; + S3C24X0_REG8 USB_INT_REG; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 EP_INT_EN_REG; + S3C24X0_REG8 res5[15]; + S3C24X0_REG8 USB_INT_EN_REG; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 FRAME_NUM1_REG; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 FRAME_NUM2_REG; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 INDEX_REG; + S3C24X0_REG8 res9[7]; + S3C24X0_REG8 MAXP_REG; + S3C24X0_REG8 res10[7]; + S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 IN_CSR2_REG; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 OUT_CSR1_REG; + S3C24X0_REG8 res13[7]; + S3C24X0_REG8 OUT_CSR2_REG; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 OUT_FIFO_CNT1_REG; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 OUT_FIFO_CNT2_REG; + S3C24X0_REG8 res16[3]; +#endif /* __BIG_ENDIAN */ + S3C24X0_USB_DEV_FIFOS fifo[5]; + S3C24X0_USB_DEV_DMAS dma[5]; +} /*__attribute__((__packed__))*/ S3C24X0_USB_DEVICE; + + +/* WATCH DOG TIMER (see manual chapter 18) */ +typedef struct { + S3C24X0_REG32 WTCON; + S3C24X0_REG32 WTDAT; + S3C24X0_REG32 WTCNT; +} /*__attribute__((__packed__))*/ S3C24X0_WATCHDOG; + + +/* IIC (see manual chapter 20) */ +typedef struct { + S3C24X0_REG32 IICCON; + S3C24X0_REG32 IICSTAT; + S3C24X0_REG32 IICADD; + S3C24X0_REG32 IICDS; +} /*__attribute__((__packed__))*/ S3C24X0_I2C; + + +/* IIS (see manual chapter 21) */ +typedef struct { +#ifdef __BIG_ENDIAN + S3C24X0_REG16 res1; + S3C24X0_REG16 IISCON; + S3C24X0_REG16 res2; + S3C24X0_REG16 IISMOD; + S3C24X0_REG16 res3; + S3C24X0_REG16 IISPSR; + S3C24X0_REG16 res4; + S3C24X0_REG16 IISFCON; + S3C24X0_REG16 res5; + S3C24X0_REG16 IISFIFO; +#else /* little endian */ + S3C24X0_REG16 IISCON; + S3C24X0_REG16 res1; + S3C24X0_REG16 IISMOD; + S3C24X0_REG16 res2; + S3C24X0_REG16 IISPSR; + S3C24X0_REG16 res3; + S3C24X0_REG16 IISFCON; + S3C24X0_REG16 res4; + S3C24X0_REG16 IISFIFO; + S3C24X0_REG16 res5; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_I2S; + + +/* I/O PORT (see manual chapter 9) */ +typedef struct { +#ifdef CONFIG_S3C2400 + S3C24X0_REG32 PACON; + S3C24X0_REG32 PADAT; + + S3C24X0_REG32 PBCON; + S3C24X0_REG32 PBDAT; + S3C24X0_REG32 PBUP; + + S3C24X0_REG32 PCCON; + S3C24X0_REG32 PCDAT; + S3C24X0_REG32 PCUP; + + S3C24X0_REG32 PDCON; + S3C24X0_REG32 PDDAT; + S3C24X0_REG32 PDUP; + + S3C24X0_REG32 PECON; + S3C24X0_REG32 PEDAT; + S3C24X0_REG32 PEUP; + + S3C24X0_REG32 PFCON; + S3C24X0_REG32 PFDAT; + S3C24X0_REG32 PFUP; + + S3C24X0_REG32 PGCON; + S3C24X0_REG32 PGDAT; + S3C24X0_REG32 PGUP; + + S3C24X0_REG32 OPENCR; + + S3C24X0_REG32 MISCCR; + S3C24X0_REG32 EXTINT; +#endif +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 GPACON; + S3C24X0_REG32 GPADAT; + S3C24X0_REG32 res1[2]; + S3C24X0_REG32 GPBCON; + S3C24X0_REG32 GPBDAT; + S3C24X0_REG32 GPBUP; + S3C24X0_REG32 res2; + S3C24X0_REG32 GPCCON; + S3C24X0_REG32 GPCDAT; + S3C24X0_REG32 GPCUP; + S3C24X0_REG32 res3; + S3C24X0_REG32 GPDCON; + S3C24X0_REG32 GPDDAT; + S3C24X0_REG32 GPDUP; + S3C24X0_REG32 res4; + S3C24X0_REG32 GPECON; + S3C24X0_REG32 GPEDAT; + S3C24X0_REG32 GPEUP; + S3C24X0_REG32 res5; + S3C24X0_REG32 GPFCON; + S3C24X0_REG32 GPFDAT; + S3C24X0_REG32 GPFUP; + S3C24X0_REG32 res6; + S3C24X0_REG32 GPGCON; + S3C24X0_REG32 GPGDAT; + S3C24X0_REG32 GPGUP; + S3C24X0_REG32 res7; + S3C24X0_REG32 GPHCON; + S3C24X0_REG32 GPHDAT; + S3C24X0_REG32 GPHUP; + S3C24X0_REG32 res8; + + S3C24X0_REG32 MISCCR; + S3C24X0_REG32 DCLKCON; + S3C24X0_REG32 EXTINT0; + S3C24X0_REG32 EXTINT1; + S3C24X0_REG32 EXTINT2; + S3C24X0_REG32 EINTFLT0; + S3C24X0_REG32 EINTFLT1; + S3C24X0_REG32 EINTFLT2; + S3C24X0_REG32 EINTFLT3; + S3C24X0_REG32 EINTMASK; + S3C24X0_REG32 EINTPEND; + S3C24X0_REG32 GSTATUS0; + S3C24X0_REG32 GSTATUS1; + S3C24X0_REG32 GSTATUS2; + S3C24X0_REG32 GSTATUS3; + S3C24X0_REG32 GSTATUS4; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_GPIO; + + +/* RTC (see manual chapter 17) */ +typedef struct { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[67]; + S3C24X0_REG8 RTCCON; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 TICNT; + S3C24X0_REG8 res3[11]; + S3C24X0_REG8 RTCALM; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 ALMSEC; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 ALMMIN; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 ALMHOUR; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 ALMDATE; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 ALMMON; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 ALMYEAR; + S3C24X0_REG8 res10[3]; + S3C24X0_REG8 RTCRST; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 BCDSEC; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 BCDMIN; + S3C24X0_REG8 res13[3]; + S3C24X0_REG8 BCDHOUR; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 BCDDATE; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 BCDDAY; + S3C24X0_REG8 res16[3]; + S3C24X0_REG8 BCDMON; + S3C24X0_REG8 res17[3]; + S3C24X0_REG8 BCDYEAR; +#else /* little endian */ + S3C24X0_REG8 res0[64]; + S3C24X0_REG8 RTCCON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 TICNT; + S3C24X0_REG8 res2[11]; + S3C24X0_REG8 RTCALM; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 ALMSEC; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 ALMMIN; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 ALMHOUR; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 ALMDATE; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 ALMMON; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 ALMYEAR; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 RTCRST; + S3C24X0_REG8 res10[3]; + S3C24X0_REG8 BCDSEC; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 BCDMIN; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 BCDHOUR; + S3C24X0_REG8 res13[3]; + S3C24X0_REG8 BCDDATE; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 BCDDAY; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 BCDMON; + S3C24X0_REG8 res16[3]; + S3C24X0_REG8 BCDYEAR; + S3C24X0_REG8 res17[3]; +#endif +} /*__attribute__((__packed__))*/ S3C24X0_RTC; + + +/* ADC (see manual chapter 16) */ +typedef struct { + S3C24X0_REG32 ADCCON; + S3C24X0_REG32 ADCDAT; +} /*__attribute__((__packed__))*/ S3C2400_ADC; + + +/* ADC (see manual chapter 16) */ +typedef struct { + S3C24X0_REG32 ADCCON; + S3C24X0_REG32 ADCTSC; + S3C24X0_REG32 ADCDLY; + S3C24X0_REG32 ADCDAT0; + S3C24X0_REG32 ADCDAT1; +} /*__attribute__((__packed__))*/ S3C2410_ADC; + + +/* SPI (see manual chapter 22) */ +typedef struct { + S3C24X0_REG32 SPCON; + S3C24X0_REG32 SPSTA; + S3C24X0_REG32 SPPIN; + S3C24X0_REG32 SPPRE; + S3C24X0_REG32 SPTDAT; + S3C24X0_REG32 SPRDAT; + S3C24X0_REG32 res[2]; +} __attribute__((__packed__)) S3C24X0_SPI_CHANNEL; + +typedef struct { + S3C24X0_SPI_CHANNEL ch[S3C24X0_SPI_CHANNELS]; +} /*__attribute__((__packed__))*/ S3C24X0_SPI; + + +/* MMC INTERFACE (see S3C2400 manual chapter 19) */ +typedef struct { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 MMCON; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 MMCRR; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 MMFCON; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 MMSTA; + S3C24X0_REG16 res5; + S3C24X0_REG16 MMFSTA; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 MMPRE; + S3C24X0_REG16 res7; + S3C24X0_REG16 MMLEN; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 MMCR7; + S3C24X0_REG32 MMRSP[4]; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 MMCMD0; + S3C24X0_REG32 MMCMD1; + S3C24X0_REG16 res10; + S3C24X0_REG16 MMCR16; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 MMDAT; +#else + S3C24X0_REG8 MMCON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 MMCRR; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 MMFCON; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 MMSTA; + S3C24X0_REG8 res4[3]; + S3C24X0_REG16 MMFSTA; + S3C24X0_REG16 res5; + S3C24X0_REG8 MMPRE; + S3C24X0_REG8 res6[3]; + S3C24X0_REG16 MMLEN; + S3C24X0_REG16 res7; + S3C24X0_REG8 MMCR7; + S3C24X0_REG8 res8[3]; + S3C24X0_REG32 MMRSP[4]; + S3C24X0_REG8 MMCMD0; + S3C24X0_REG8 res9[3]; + S3C24X0_REG32 MMCMD1; + S3C24X0_REG16 MMCR16; + S3C24X0_REG16 res10; + S3C24X0_REG8 MMDAT; + S3C24X0_REG8 res11[3]; +#endif +} /*__attribute__((__packed__))*/ S3C2400_MMC; + + +/* SD INTERFACE (see S3C2410 manual chapter 19) */ +typedef struct { + S3C24X0_REG32 SDICON; + S3C24X0_REG32 SDIPRE; + S3C24X0_REG32 SDICARG; + S3C24X0_REG32 SDICCON; + S3C24X0_REG32 SDICSTA; + S3C24X0_REG32 SDIRSP0; + S3C24X0_REG32 SDIRSP1; + S3C24X0_REG32 SDIRSP2; + S3C24X0_REG32 SDIRSP3; + S3C24X0_REG32 SDIDTIMER; + S3C24X0_REG32 SDIBSIZE; + S3C24X0_REG32 SDIDCON; + S3C24X0_REG32 SDIDCNT; + S3C24X0_REG32 SDIDSTA; + S3C24X0_REG32 SDIFSTA; +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res[3]; + S3C24X0_REG8 SDIDAT; +#else + S3C24X0_REG8 SDIDAT; + S3C24X0_REG8 res[3]; +#endif + S3C24X0_REG32 SDIIMSK; +} /*__attribute__((__packed__))*/ S3C2410_SDI; + + +#if 0 +/* Memory control */ +#define rBWSCON (*(volatile unsigned *)0x48000000) +#define rBANKCON0 (*(volatile unsigned *)0x48000004) +#define rBANKCON1 (*(volatile unsigned *)0x48000008) +#define rBANKCON2 (*(volatile unsigned *)0x4800000C) +#define rBANKCON3 (*(volatile unsigned *)0x48000010) +#define rBANKCON4 (*(volatile unsigned *)0x48000014) +#define rBANKCON5 (*(volatile unsigned *)0x48000018) +#define rBANKCON6 (*(volatile unsigned *)0x4800001C) +#define rBANKCON7 (*(volatile unsigned *)0x48000020) +#define rREFRESH (*(volatile unsigned *)0x48000024) +#define rBANKSIZE (*(volatile unsigned *)0x48000028) +#define rMRSRB6 (*(volatile unsigned *)0x4800002C) +#define rMRSRB7 (*(volatile unsigned *)0x48000030) + + +/* USB HOST */ +#define rHcRevision (*(volatile unsigned *)0x49000000) +#define rHcControl (*(volatile unsigned *)0x49000004) +#define rHcCommonStatus (*(volatile unsigned *)0x49000008) +#define rHcInterruptStatus (*(volatile unsigned *)0x4900000C) +#define rHcInterruptEnable (*(volatile unsigned *)0x49000010) +#define rHcInterruptDisable (*(volatile unsigned *)0x49000014) +#define rHcHCCA (*(volatile unsigned *)0x49000018) +#define rHcPeriodCuttendED (*(volatile unsigned *)0x4900001C) +#define rHcControlHeadED (*(volatile unsigned *)0x49000020) +#define rHcControlCurrentED (*(volatile unsigned *)0x49000024) +#define rHcBulkHeadED (*(volatile unsigned *)0x49000028) +#define rHcBuldCurrentED (*(volatile unsigned *)0x4900002C) +#define rHcDoneHead (*(volatile unsigned *)0x49000030) +#define rHcRmInterval (*(volatile unsigned *)0x49000034) +#define rHcFmRemaining (*(volatile unsigned *)0x49000038) +#define rHcFmNumber (*(volatile unsigned *)0x4900003C) +#define rHcPeriodicStart (*(volatile unsigned *)0x49000040) +#define rHcLSThreshold (*(volatile unsigned *)0x49000044) +#define rHcRhDescriptorA (*(volatile unsigned *)0x49000048) +#define rHcRhDescriptorB (*(volatile unsigned *)0x4900004C) +#define rHcRhStatus (*(volatile unsigned *)0x49000050) +#define rHcRhPortStatus1 (*(volatile unsigned *)0x49000054) +#define rHcRhPortStatus2 (*(volatile unsigned *)0x49000058) + + +/* INTERRUPT */ +#define rSRCPND (*(volatile unsigned *)0x4A000000) +#define rINTMOD (*(volatile unsigned *)0x4A000004) +#define rINTMSK (*(volatile unsigned *)0x4A000008) +#define rPRIORITY (*(volatile unsigned *)0x4A00000C) +#define rINTPND (*(volatile unsigned *)0x4A000010) +#define rINTOFFSET (*(volatile unsigned *)0x4A000014) +#define rSUBSRCPND (*(volatile unsigned *)0x4A000018) +#define rINTSUBMSK (*(volatile unsigned *)0x4A00001C) + + +/* DMA */ +#define rDISRC0 (*(volatile unsigned *)0x4B000000) +#define rDISRCC0 (*(volatile unsigned *)0x4B000004) +#define rDIDST0 (*(volatile unsigned *)0x4B000008) +#define rDIDSTC0 (*(volatile unsigned *)0x4B00000C) +#define rDCON0 (*(volatile unsigned *)0x4B000010) +#define rDSTAT0 (*(volatile unsigned *)0x4B000014) +#define rDCSRC0 (*(volatile unsigned *)0x4B000018) +#define rDCDST0 (*(volatile unsigned *)0x4B00001C) +#define rDMASKTRIG0 (*(volatile unsigned *)0x4B000020) +#define rDISRC1 (*(volatile unsigned *)0x4B000040) +#define rDISRCC1 (*(volatile unsigned *)0x4B000044) +#define rDIDST1 (*(volatile unsigned *)0x4B000048) +#define rDIDSTC1 (*(volatile unsigned *)0x4B00004C) +#define rDCON1 (*(volatile unsigned *)0x4B000050) +#define rDSTAT1 (*(volatile unsigned *)0x4B000054) +#define rDCSRC1 (*(volatile unsigned *)0x4B000058) +#define rDCDST1 (*(volatile unsigned *)0x4B00005C) +#define rDMASKTRIG1 (*(volatile unsigned *)0x4B000060) +#define rDISRC2 (*(volatile unsigned *)0x4B000080) +#define rDISRCC2 (*(volatile unsigned *)0x4B000084) +#define rDIDST2 (*(volatile unsigned *)0x4B000088) +#define rDIDSTC2 (*(volatile unsigned *)0x4B00008C) +#define rDCON2 (*(volatile unsigned *)0x4B000090) +#define rDSTAT2 (*(volatile unsigned *)0x4B000094) +#define rDCSRC2 (*(volatile unsigned *)0x4B000098) +#define rDCDST2 (*(volatile unsigned *)0x4B00009C) +#define rDMASKTRIG2 (*(volatile unsigned *)0x4B0000A0) +#define rDISRC3 (*(volatile unsigned *)0x4B0000C0) +#define rDISRCC3 (*(volatile unsigned *)0x4B0000C4) +#define rDIDST3 (*(volatile unsigned *)0x4B0000C8) +#define rDIDSTC3 (*(volatile unsigned *)0x4B0000CC) +#define rDCON3 (*(volatile unsigned *)0x4B0000D0) +#define rDSTAT3 (*(volatile unsigned *)0x4B0000D4) +#define rDCSRC3 (*(volatile unsigned *)0x4B0000D8) +#define rDCDST3 (*(volatile unsigned *)0x4B0000DC) +#define rDMASKTRIG3 (*(volatile unsigned *)0x4B0000E0) + + +/* CLOCK & POWER MANAGEMENT */ +#define rLOCKTIME (*(volatile unsigned *)0x4C000000) +#define rMPLLCON (*(volatile unsigned *)0x4C000004) +#define rUPLLCON (*(volatile unsigned *)0x4C000008) +#define rCLKCON (*(volatile unsigned *)0x4C00000C) +#define rCLKSLOW (*(volatile unsigned *)0x4C000010) +#define rCLKDIVN (*(volatile unsigned *)0x4C000014) + + +/* LCD CONTROLLER */ +#define rLCDCON1 (*(volatile unsigned *)0x4D000000) +#define rLCDCON2 (*(volatile unsigned *)0x4D000004) +#define rLCDCON3 (*(volatile unsigned *)0x4D000008) +#define rLCDCON4 (*(volatile unsigned *)0x4D00000C) +#define rLCDCON5 (*(volatile unsigned *)0x4D000010) +#define rLCDSADDR1 (*(volatile unsigned *)0x4D000014) +#define rLCDSADDR2 (*(volatile unsigned *)0x4D000018) +#define rLCDSADDR3 (*(volatile unsigned *)0x4D00001C) +#define rREDLUT (*(volatile unsigned *)0x4D000020) +#define rGREENLUT (*(volatile unsigned *)0x4D000024) +#define rBLUELUT (*(volatile unsigned *)0x4D000028) +#define rDITHMODE (*(volatile unsigned *)0x4D00004C) +#define rTPAL (*(volatile unsigned *)0x4D000050) +#define rLCDINTPND (*(volatile unsigned *)0x4D000054) +#define rLCDSRCPND (*(volatile unsigned *)0x4D000058) +#define rLCDINTMSK (*(volatile unsigned *)0x4D00005C) + + +/* NAND FLASH */ +#define rNFCONF (*(volatile unsigned *)0x4E000000) +#define rNFCMD (*(volatile unsigned *)0x4E000004) +#define rNFADDR (*(volatile unsigned *)0x4E000008) +#define rNFDATA (*(volatile unsigned *)0x4E00000C) +#define rNFSTAT (*(volatile unsigned *)0x4E000010) +#define rNFECC (*(volatile unsigned *)0x4E000014) + + +/* UART */ +#define rULCON0 (*(volatile unsigned *)0x50000000) +#define rUCON0 (*(volatile unsigned *)0x50000004) +#define rUFCON0 (*(volatile unsigned *)0x50000008) +#define rUMCON0 (*(volatile unsigned *)0x5000000C) +#define rUTRSTAT0 (*(volatile unsigned *)0x50000010) +#define rUERSTAT0 (*(volatile unsigned *)0x50000014) +#define rUFSTAT0 (*(volatile unsigned *)0x50000018) +#define rUMSTAT0 (*(volatile unsigned *)0x5000001C) +#define rUBRDIV0 (*(volatile unsigned *)0x50000028) + +#define rULCON1 (*(volatile unsigned *)0x50004000) +#define rUCON1 (*(volatile unsigned *)0x50004004) +#define rUFCON1 (*(volatile unsigned *)0x50004008) +#define rUMCON1 (*(volatile unsigned *)0x5000400C) +#define rUTRSTAT1 (*(volatile unsigned *)0x50004010) +#define rUERSTAT1 (*(volatile unsigned *)0x50004014) +#define rUFSTAT1 (*(volatile unsigned *)0x50004018) +#define rUMSTAT1 (*(volatile unsigned *)0x5000401C) +#define rUBRDIV1 (*(volatile unsigned *)0x50004028) + +#define rULCON2 (*(volatile unsigned *)0x50008000) +#define rUCON2 (*(volatile unsigned *)0x50008004) +#define rUFCON2 (*(volatile unsigned *)0x50008008) +#define rUTRSTAT2 (*(volatile unsigned *)0x50008010) +#define rUERSTAT2 (*(volatile unsigned *)0x50008014) +#define rUFSTAT2 (*(volatile unsigned *)0x50008018) +#define rUBRDIV2 (*(volatile unsigned *)0x50008028) + +#ifdef __BIG_ENDIAN +#define rUTXH0 (*(volatile unsigned char *)0x50000023) +#define rURXH0 (*(volatile unsigned char *)0x50000027) +#define rUTXH1 (*(volatile unsigned char *)0x50004023) +#define rURXH1 (*(volatile unsigned char *)0x50004027) +#define rUTXH2 (*(volatile unsigned char *)0x50008023) +#define rURXH2 (*(volatile unsigned char *)0x50008027) + +#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch) +#define RdURXH0() (*(volatile unsigned char *)0x50000027) +#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch) +#define RdURXH1() (*(volatile unsigned char *)0x50004027) +#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch) +#define RdURXH2() (*(volatile unsigned char *)0x50008027) + +#define UTXH0 (0x50000020+3) /* byte_access address by DMA */ +#define URXH0 (0x50000024+3) +#define UTXH1 (0x50004020+3) +#define URXH1 (0x50004024+3) +#define UTXH2 (0x50008020+3) +#define URXH2 (0x50008024+3) + +#else /* Little Endian */ +#define rUTXH0 (*(volatile unsigned char *)0x50000020) +#define rURXH0 (*(volatile unsigned char *)0x50000024) +#define rUTXH1 (*(volatile unsigned char *)0x50004020) +#define rURXH1 (*(volatile unsigned char *)0x50004024) +#define rUTXH2 (*(volatile unsigned char *)0x50008020) +#define rURXH2 (*(volatile unsigned char *)0x50008024) + +#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch) +#define RdURXH0() (*(volatile unsigned char *)0x50000024) +#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch) +#define RdURXH1() (*(volatile unsigned char *)0x50004024) +#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch) +#define RdURXH2() (*(volatile unsigned char *)0x50008024) + +#define UTXH0 (0x50000020) /* byte_access address by DMA */ +#define URXH0 (0x50000024) +#define UTXH1 (0x50004020) +#define URXH1 (0x50004024) +#define UTXH2 (0x50008020) +#define URXH2 (0x50008024) +#endif + + +/* PWM TIMER */ +#define rTCFG0 (*(volatile unsigned *)0x51000000) +#define rTCFG1 (*(volatile unsigned *)0x51000004) +#define rTCON (*(volatile unsigned *)0x51000008) +#define rTCNTB0 (*(volatile unsigned *)0x5100000C) +#define rTCMPB0 (*(volatile unsigned *)0x51000010) +#define rTCNTO0 (*(volatile unsigned *)0x51000014) +#define rTCNTB1 (*(volatile unsigned *)0x51000018) +#define rTCMPB1 (*(volatile unsigned *)0x5100001C) +#define rTCNTO1 (*(volatile unsigned *)0x51000020) +#define rTCNTB2 (*(volatile unsigned *)0x51000024) +#define rTCMPB2 (*(volatile unsigned *)0x51000028) +#define rTCNTO2 (*(volatile unsigned *)0x5100002C) +#define rTCNTB3 (*(volatile unsigned *)0x51000030) +#define rTCMPB3 (*(volatile unsigned *)0x51000034) +#define rTCNTO3 (*(volatile unsigned *)0x51000038) +#define rTCNTB4 (*(volatile unsigned *)0x5100003C) +#define rTCNTO4 (*(volatile unsigned *)0x51000040) + + +/* USB DEVICE */ +#ifdef __BIG_ENDIAN +#define rFUNC_ADDR_REG (*(volatile unsigned char *)0x52000143) +#define rPWR_REG (*(volatile unsigned char *)0x52000147) +#define rEP_INT_REG (*(volatile unsigned char *)0x5200014B) +#define rUSB_INT_REG (*(volatile unsigned char *)0x5200015B) +#define rEP_INT_EN_REG (*(volatile unsigned char *)0x5200015F) +#define rUSB_INT_EN_REG (*(volatile unsigned char *)0x5200016F) +#define rFRAME_NUM1_REG (*(volatile unsigned char *)0x52000173) +#define rFRAME_NUM2_REG (*(volatile unsigned char *)0x52000177) +#define rINDEX_REG (*(volatile unsigned char *)0x5200017B) +#define rMAXP_REG (*(volatile unsigned char *)0x52000183) +#define rEP0_CSR (*(volatile unsigned char *)0x52000187) +#define rIN_CSR1_REG (*(volatile unsigned char *)0x52000187) +#define rIN_CSR2_REG (*(volatile unsigned char *)0x5200018B) +#define rOUT_CSR1_REG (*(volatile unsigned char *)0x52000193) +#define rOUT_CSR2_REG (*(volatile unsigned char *)0x52000197) +#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x5200019B) +#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019F) +#define rEP0_FIFO (*(volatile unsigned char *)0x520001C3) +#define rEP1_FIFO (*(volatile unsigned char *)0x520001C7) +#define rEP2_FIFO (*(volatile unsigned char *)0x520001CB) +#define rEP3_FIFO (*(volatile unsigned char *)0x520001CF) +#define rEP4_FIFO (*(volatile unsigned char *)0x520001D3) +#define rEP1_DMA_CON (*(volatile unsigned char *)0x52000203) +#define rEP1_DMA_UNIT (*(volatile unsigned char *)0x52000207) +#define rEP1_DMA_FIFO (*(volatile unsigned char *)0x5200020B) +#define rEP1_DMA_TX_LO (*(volatile unsigned char *)0x5200020F) +#define rEP1_DMA_TX_MD (*(volatile unsigned char *)0x52000213) +#define rEP1_DMA_TX_HI (*(volatile unsigned char *)0x52000217) +#define rEP2_DMA_CON (*(volatile unsigned char *)0x5200021B) +#define rEP2_DMA_UNIT (*(volatile unsigned char *)0x5200021F) +#define rEP2_DMA_FIFO (*(volatile unsigned char *)0x52000223) +#define rEP2_DMA_TX_LO (*(volatile unsigned char *)0x52000227) +#define rEP2_DMA_TX_MD (*(volatile unsigned char *)0x5200022B) +#define rEP2_DMA_TX_HI (*(volatile unsigned char *)0x5200022F) +#define rEP3_DMA_CON (*(volatile unsigned char *)0x52000243) +#define rEP3_DMA_UNIT (*(volatile unsigned char *)0x52000247) +#define rEP3_DMA_FIFO (*(volatile unsigned char *)0x5200024B) +#define rEP3_DMA_TX_LO (*(volatile unsigned char *)0x5200024F) +#define rEP3_DMA_TX_MD (*(volatile unsigned char *)0x52000253) +#define rEP3_DMA_TX_HI (*(volatile unsigned char *)0x52000257) +#define rEP4_DMA_CON (*(volatile unsigned char *)0x5200025B) +#define rEP4_DMA_UNIT (*(volatile unsigned char *)0x5200025F) +#define rEP4_DMA_FIFO (*(volatile unsigned char *)0x52000263) +#define rEP4_DMA_TX_LO (*(volatile unsigned char *)0x52000267) +#define rEP4_DMA_TX_MD (*(volatile unsigned char *)0x5200026B) +#define rEP4_DMA_TX_HI (*(volatile unsigned char *)0x5200026F) +#else /* little endian */ +#define rFUNC_ADDR_REG (*(volatile unsigned char *)0x52000140) +#define rPWR_REG (*(volatile unsigned char *)0x52000144) +#define rEP_INT_REG (*(volatile unsigned char *)0x52000148) +#define rUSB_INT_REG (*(volatile unsigned char *)0x52000158) +#define rEP_INT_EN_REG (*(volatile unsigned char *)0x5200015C) +#define rUSB_INT_EN_REG (*(volatile unsigned char *)0x5200016C) +#define rFRAME_NUM1_REG (*(volatile unsigned char *)0x52000170) +#define rFRAME_NUM2_REG (*(volatile unsigned char *)0x52000174) +#define rINDEX_REG (*(volatile unsigned char *)0x52000178) +#define rMAXP_REG (*(volatile unsigned char *)0x52000180) +#define rEP0_CSR (*(volatile unsigned char *)0x52000184) +#define rIN_CSR1_REG (*(volatile unsigned char *)0x52000184) +#define rIN_CSR2_REG (*(volatile unsigned char *)0x52000188) +#define rOUT_CSR1_REG (*(volatile unsigned char *)0x52000190) +#define rOUT_CSR2_REG (*(volatile unsigned char *)0x52000194) +#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) +#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019C) +#define rEP0_FIFO (*(volatile unsigned char *)0x520001C0) +#define rEP1_FIFO (*(volatile unsigned char *)0x520001C4) +#define rEP2_FIFO (*(volatile unsigned char *)0x520001C8) +#define rEP3_FIFO (*(volatile unsigned char *)0x520001CC) +#define rEP4_FIFO (*(volatile unsigned char *)0x520001D0) +#define rEP1_DMA_CON (*(volatile unsigned char *)0x52000200) +#define rEP1_DMA_UNIT (*(volatile unsigned char *)0x52000204) +#define rEP1_DMA_FIFO (*(volatile unsigned char *)0x52000208) +#define rEP1_DMA_TX_LO (*(volatile unsigned char *)0x5200020C) +#define rEP1_DMA_TX_MD (*(volatile unsigned char *)0x52000210) +#define rEP1_DMA_TX_HI (*(volatile unsigned char *)0x52000214) +#define rEP2_DMA_CON (*(volatile unsigned char *)0x52000218) +#define rEP2_DMA_UNIT (*(volatile unsigned char *)0x5200021C) +#define rEP2_DMA_FIFO (*(volatile unsigned char *)0x52000220) +#define rEP2_DMA_TX_LO (*(volatile unsigned char *)0x52000224) +#define rEP2_DMA_TX_MD (*(volatile unsigned char *)0x52000228) +#define rEP2_DMA_TX_HI (*(volatile unsigned char *)0x5200022C) +#define rEP3_DMA_CON (*(volatile unsigned char *)0x52000240) +#define rEP3_DMA_UNIT (*(volatile unsigned char *)0x52000244) +#define rEP3_DMA_FIFO (*(volatile unsigned char *)0x52000248) +#define rEP3_DMA_TX_LO (*(volatile unsigned char *)0x5200024C) +#define rEP3_DMA_TX_MD (*(volatile unsigned char *)0x52000250) +#define rEP3_DMA_TX_HI (*(volatile unsigned char *)0x52000254) +#define rEP4_DMA_CON (*(volatile unsigned char *)0x52000258) +#define rEP4_DMA_UNIT (*(volatile unsigned char *)0x5200025C) +#define rEP4_DMA_FIFO (*(volatile unsigned char *)0x52000260) +#define rEP4_DMA_TX_LO (*(volatile unsigned char *)0x52000264) +#define rEP4_DMA_TX_MD (*(volatile unsigned char *)0x52000268) +#define rEP4_DMA_TX_HI (*(volatile unsigned char *)0x5200026C) +#endif /* __BIG_ENDIAN */ + + +/* WATCH DOG TIMER */ +#define rWTCON (*(volatile unsigned *)0x53000000) +#define rWTDAT (*(volatile unsigned *)0x53000004) +#define rWTCNT (*(volatile unsigned *)0x53000008) + + +/* IIC */ +#define rIICCON (*(volatile unsigned *)0x54000000) +#define rIICSTAT (*(volatile unsigned *)0x54000004) +#define rIICADD (*(volatile unsigned *)0x54000008) +#define rIICDS (*(volatile unsigned *)0x5400000C) + + +/* IIS */ +#define rIISCON (*(volatile unsigned *)0x55000000) +#define rIISMOD (*(volatile unsigned *)0x55000004) +#define rIISPSR (*(volatile unsigned *)0x55000008) +#define rIISFCON (*(volatile unsigned *)0x5500000C) + +#ifdef __BIG_ENDIAN +#define IISFIF ((volatile unsigned short *)0x55000012) +#else /* little endian */ +#define IISFIF ((volatile unsigned short *)0x55000010) +#endif + + +/* I/O PORT */ +#define rGPACON (*(volatile unsigned *)0x56000000) +#define rGPADAT (*(volatile unsigned *)0x56000004) + +#define rGPBCON (*(volatile unsigned *)0x56000010) +#define rGPBDAT (*(volatile unsigned *)0x56000014) +#define rGPBUP (*(volatile unsigned *)0x56000018) + +#define rGPCCON (*(volatile unsigned *)0x56000020) +#define rGPCDAT (*(volatile unsigned *)0x56000024) +#define rGPCUP (*(volatile unsigned *)0x56000028) + +#define rGPDCON (*(volatile unsigned *)0x56000030) +#define rGPDDAT (*(volatile unsigned *)0x56000034) +#define rGPDUP (*(volatile unsigned *)0x56000038) + +#define rGPECON (*(volatile unsigned *)0x56000040) +#define rGPEDAT (*(volatile unsigned *)0x56000044) +#define rGPEUP (*(volatile unsigned *)0x56000048) + +#define rGPFCON (*(volatile unsigned *)0x56000050) +#define rGPFDAT (*(volatile unsigned *)0x56000054) +#define rGPFUP (*(volatile unsigned *)0x56000058) + +#define rGPGCON (*(volatile unsigned *)0x56000060) +#define rGPGDAT (*(volatile unsigned *)0x56000064) +#define rGPGUP (*(volatile unsigned *)0x56000068) + +#define rGPHCON (*(volatile unsigned *)0x56000070) +#define rGPHDAT (*(volatile unsigned *)0x56000074) +#define rGPHUP (*(volatile unsigned *)0x56000078) + +#define rMISCCR (*(volatile unsigned *)0x56000080) +#define rDCLKCON (*(volatile unsigned *)0x56000084) +#define rEXTINT0 (*(volatile unsigned *)0x56000088) +#define rEXTINT1 (*(volatile unsigned *)0x5600008C) +#define rEXTINT2 (*(volatile unsigned *)0x56000090) +#define rEINTFLT0 (*(volatile unsigned *)0x56000094) +#define rEINTFLT1 (*(volatile unsigned *)0x56000098) +#define rEINTFLT2 (*(volatile unsigned *)0x5600009C) +#define rEINTFLT3 (*(volatile unsigned *)0x560000A0) +#define rEINTMASK (*(volatile unsigned *)0x560000A4) +#define rEINTPEND (*(volatile unsigned *)0x560000A8) +#define rGSTATUS0 (*(volatile unsigned *)0x560000AC) +#define rGSTATUS1 (*(volatile unsigned *)0x560000B0) + + +/* RTC */ +#ifdef __BIG_ENDIAN +#define rRTCCON (*(volatile unsigned char *)0x57000043) +#define rTICNT (*(volatile unsigned char *)0x57000047) +#define rRTCALM (*(volatile unsigned char *)0x57000053) +#define rALMSEC (*(volatile unsigned char *)0x57000057) +#define rALMMIN (*(volatile unsigned char *)0x5700005B) +#define rALMHOUR (*(volatile unsigned char *)0x5700005F) +#define rALMDATE (*(volatile unsigned char *)0x57000063) +#define rALMMON (*(volatile unsigned char *)0x57000067) +#define rALMYEAR (*(volatile unsigned char *)0x5700006B) +#define rRTCRST (*(volatile unsigned char *)0x5700006F) +#define rBCDSEC (*(volatile unsigned char *)0x57000073) +#define rBCDMIN (*(volatile unsigned char *)0x57000077) +#define rBCDHOUR (*(volatile unsigned char *)0x5700007B) +#define rBCDDATE (*(volatile unsigned char *)0x5700007F) +#define rBCDDAY (*(volatile unsigned char *)0x57000083) +#define rBCDMON (*(volatile unsigned char *)0x57000087) +#define rBCDYEAR (*(volatile unsigned char *)0x5700008B) +#else /* little endian */ +#define rRTCCON (*(volatile unsigned char *)0x57000040) +#define rTICNT (*(volatile unsigned char *)0x57000044) +#define rRTCALM (*(volatile unsigned char *)0x57000050) +#define rALMSEC (*(volatile unsigned char *)0x57000054) +#define rALMMIN (*(volatile unsigned char *)0x57000058) +#define rALMHOUR (*(volatile unsigned char *)0x5700005C) +#define rALMDATE (*(volatile unsigned char *)0x57000060) +#define rALMMON (*(volatile unsigned char *)0x57000064) +#define rALMYEAR (*(volatile unsigned char *)0x57000068) +#define rRTCRST (*(volatile unsigned char *)0x5700006C) +#define rBCDSEC (*(volatile unsigned char *)0x57000070) +#define rBCDMIN (*(volatile unsigned char *)0x57000074) +#define rBCDHOUR (*(volatile unsigned char *)0x57000078) +#define rBCDDATE (*(volatile unsigned char *)0x5700007C) +#define rBCDDAY (*(volatile unsigned char *)0x57000080) +#define rBCDMON (*(volatile unsigned char *)0x57000084) +#define rBCDYEAR (*(volatile unsigned char *)0x57000088) +#endif + + +/* ADC */ +#define rADCCON (*(volatile unsigned *)0x58000000) +#define rADCTSC (*(volatile unsigned *)0x58000004) +#define rADCDLY (*(volatile unsigned *)0x58000008) +#define rADCDAT0 (*(volatile unsigned *)0x5800000C) +#define rADCDAT1 (*(volatile unsigned *)0x58000010) + + +/* SPI */ +#define rSPCON0 (*(volatile unsigned *)0x59000000) +#define rSPSTA0 (*(volatile unsigned *)0x59000004) +#define rSPPIN0 (*(volatile unsigned *)0x59000008) +#define rSPPRE0 (*(volatile unsigned *)0x5900000C) +#define rSPTDAT0 (*(volatile unsigned *)0x59000010) +#define rSPRDAT0 (*(volatile unsigned *)0x59000014) +#define rSPCON1 (*(volatile unsigned *)0x59000020) +#define rSPSTA1 (*(volatile unsigned *)0x59000024) +#define rSPPIN1 (*(volatile unsigned *)0x59000028) +#define rSPPRE1 (*(volatile unsigned *)0x5900002C) +#define rSPTDAT1 (*(volatile unsigned *)0x59000030) +#define rSPRDAT1 (*(volatile unsigned *)0x59000034) + + +/* SD INTERFACE */ +#define rSDICON (*(volatile unsigned *)0x5A000000) +#define rSDIPRE (*(volatile unsigned *)0x5A000004) +#define rSDICmdArg (*(volatile unsigned *)0x5A000008) +#define rSDICmdCon (*(volatile unsigned *)0x5A00000C) +#define rSDICmdSta (*(volatile unsigned *)0x5A000010) +#define rSDIRSP0 (*(volatile unsigned *)0x5A000014) +#define rSDIRSP1 (*(volatile unsigned *)0x5A000018) +#define rSDIRSP2 (*(volatile unsigned *)0x5A00001C) +#define rSDIRSP3 (*(volatile unsigned *)0x5A000020) +#define rSDIDTimer (*(volatile unsigned *)0x5A000024) +#define rSDIBSize (*(volatile unsigned *)0x5A000028) +#define rSDIDatCon (*(volatile unsigned *)0x5A00002C) +#define rSDIDatCnt (*(volatile unsigned *)0x5A000030) +#define rSDIDatSta (*(volatile unsigned *)0x5A000034) +#define rSDIFSTA (*(volatile unsigned *)0x5A000038) +#ifdef __BIG_ENDIAN +#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) +#else +#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) +#endif +#define rSDIIntMsk (*(volatile unsigned *)0x5A000040) + +#endif + +#endif /*__S3C24X0_H__*/ diff --git a/include/status_led.h b/include/status_led.h index c1fb7f3f23..5a33e31e93 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -321,6 +321,10 @@ void status_led_set (int led, int state); #endif /************************************************************************/ +#ifndef CONFIG_BOARD_SPECIFIC_LED +# include <asm/status_led.h> +#endif + #endif /* CONFIG_STATUS_LED */ #endif /* _STATUS_LED_H_ */ diff --git a/lib_arm/board.c b/lib_arm/board.c index 37d4d9f385..f169920c67 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -42,8 +42,12 @@ extern int AT91F_DataflashInit(void); extern void dataflash_print_info(void); #endif +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + const char version_string[] = - U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"; + U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"CONFIG_IDENT_STRING; #ifdef CONFIG_DRIVER_CS8900 extern void cs8900_get_enetaddr (uchar * addr); @@ -150,7 +154,6 @@ static void display_flash_config (ulong size) } - /* * Breath some life into the board... * diff --git a/rtc/Makefile b/rtc/Makefile index c26a23239b..1190f2efc6 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -31,7 +31,7 @@ OBJS = date.o \ ds12887.o ds1302.o ds1306.o ds1307.o ds1337.o \ ds1556.o ds164x.o ds174x.o \ m41t11.o m48t35ax.o mc146818.o mk48t59.o \ - mpc8xx.o pcf8563.o + mpc8xx.o pcf8563.o s3c24x0_rtc.o all: $(LIB) diff --git a/rtc/s3c24x0_rtc.c b/rtc/s3c24x0_rtc.c new file mode 100644 index 0000000000..bf8008d8da --- /dev/null +++ b/rtc/s3c24x0_rtc.c @@ -0,0 +1,178 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Date & Time support for the built-in Samsung S3C24X0 RTC + */ + +#include <common.h> +#include <command.h> + +#if defined(CONFIG_RTC_S3C24X0) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +#if defined(CONFIG_S3C2400) +#include <s3c2400.h> +#elif defined(CONFIG_S3C2410) +#include <s3c2410.h> +#endif + +#include <rtc.h> + +/*#define DEBUG*/ + +typedef enum { + RTC_ENABLE, + RTC_DISABLE +} RTC_ACCESS; + + +static inline void SetRTC_Access(RTC_ACCESS a) +{ + S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC(); + switch (a) { + case RTC_ENABLE: + rtc->RTCCON |= 0x01; break; + + case RTC_DISABLE: + rtc->RTCCON &= ~0x01; break; + } +} + +static unsigned bcd2bin (uchar n) +{ + return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); +} + +static unsigned char bin2bcd (unsigned int n) +{ + return (((n / 10) << 4) | (n % 10)); +} + +/* ------------------------------------------------------------------------- */ + +void rtc_get (struct rtc_time *tmp) +{ + S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC(); + uchar sec, min, hour, mday, wday, mon, year; + uchar a_sec,a_min, a_hour, a_date, a_mon, a_year, a_armed; + + /* enable access to RTC registers */ + SetRTC_Access(RTC_ENABLE); + + /* read RTC registers */ + sec = rtc->BCDSEC; + min = rtc->BCDMIN; + hour = rtc->BCDHOUR; + mday = rtc->BCDDATE; + wday = rtc->BCDDAY; + mon = rtc->BCDMON; + year = rtc->BCDYEAR; + + /* read ALARM registers */ + a_sec = rtc->ALMSEC; + a_min = rtc->ALMMIN; + a_hour = rtc->ALMHOUR; + a_date = rtc->ALMDATE; + a_mon = rtc->ALMMON; + a_year = rtc->ALMYEAR; + a_armed = rtc->RTCALM; + + /* disable access to RTC registers */ + SetRTC_Access(RTC_DISABLE); + +#ifdef RTC_DEBUG + printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " + "hr: %02x min: %02x sec: %02x\n", + year, mon, mday, wday, + hour, min, sec); + printf ( "Alarms: %02x: year: %02x month: %02x date: %02x hour: %02x min: %02x sec: %02x\n", + a_armed, + a_year, a_mon, a_date, + a_hour, a_min, a_sec); +#endif + + tmp->tm_sec = bcd2bin(sec & 0x7F); + tmp->tm_min = bcd2bin(min & 0x7F); + tmp->tm_hour = bcd2bin(hour & 0x3F); + tmp->tm_mday = bcd2bin(mday & 0x3F); + tmp->tm_mon = bcd2bin(mon & 0x1F); + tmp->tm_year = bcd2bin(year); + tmp->tm_wday = bcd2bin(wday & 0x07); + if(tmp->tm_year<70) + tmp->tm_year+=2000; + else + tmp->tm_year+=1900; + tmp->tm_yday = 0; + tmp->tm_isdst= 0; +#ifdef RTC_DEBUG + printf ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif +} + +void rtc_set (struct rtc_time *tmp) +{ + S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC(); + uchar sec, min, hour, mday, wday, mon, year; + +#ifdef RTC_DEBUG + printf ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif + year = bin2bcd(tmp->tm_year % 100); + mon = bin2bcd(tmp->tm_mon); + wday = bin2bcd(tmp->tm_wday); + mday = bin2bcd(tmp->tm_mday); + hour = bin2bcd(tmp->tm_hour); + min = bin2bcd(tmp->tm_min); + sec = bin2bcd(tmp->tm_sec); + + /* enable access to RTC registers */ + SetRTC_Access(RTC_ENABLE); + + /* write RTC registers */ + rtc->BCDSEC = sec; + rtc->BCDMIN = min; + rtc->BCDHOUR = hour; + rtc->BCDDATE = mday; + rtc->BCDDAY = wday; + rtc->BCDMON = mon; + rtc->BCDYEAR = year; + + /* disable access to RTC registers */ + SetRTC_Access(RTC_DISABLE); +} + +void rtc_reset (void) +{ + S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC(); + + rtc->RTCCON = (rtc->RTCCON & ~0x06) | 0x08; + rtc->RTCCON &= ~0x08; +} + +/* ------------------------------------------------------------------------- */ + +#endif /* CONFIG_RTC_S3C24X0 && CFG_CMD_DATE */ |