diff options
| -rw-r--r-- | drivers/block/Makefile | 10 | ||||
| -rw-r--r-- | drivers/block/ahci.c | 3 | ||||
| -rw-r--r-- | drivers/block/ata_piix.c | 4 | ||||
| -rw-r--r-- | drivers/block/sil680.c | 5 | ||||
| -rw-r--r-- | drivers/block/sym53c8xx.c | 5 | ||||
| -rw-r--r-- | drivers/block/systemace.c | 3 | ||||
| -rw-r--r-- | include/configs/sc520_cdp.h | 2 |
7 files changed, 7 insertions, 25 deletions
diff --git a/drivers/block/Makefile b/drivers/block/Makefile index a09cd2a603..642582b088 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -25,14 +25,14 @@ include $(TOPDIR)/config.mk LIB := $(obj)libblock.a -COBJS-y += ahci.o -COBJS-y += ata_piix.o +COBJS-$(CONFIG_SCSI_AHCI) += ahci.o +COBJS-$(CONFIG_ATA_PIIX) += ata_piix.o COBJS-$(CONFIG_FSL_SATA) += fsl_sata.o COBJS-$(CONFIG_LIBATA) += libata.o COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o -COBJS-y += sil680.o -COBJS-y += sym53c8xx.o -COBJS-y += systemace.o +COBJS-$(CONFIG_IDE_SIL680) += sil680.o +COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o +COBJS-$(CONFIG_SYSTEMACE) += systemace.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 3d82c625a3..52fd1080e6 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -26,8 +26,6 @@ */ #include <common.h> -#ifdef CONFIG_SCSI_AHCI - #include <command.h> #include <pci.h> #include <asm/processor.h> @@ -700,4 +698,3 @@ void scsi_print_error(ccb * pccb) { /*The ahci error info can be read in the ahci driver*/ } -#endif diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c index 441a4dcd8d..4c26b36f5a 100644 --- a/drivers/block/ata_piix.c +++ b/drivers/block/ata_piix.c @@ -35,8 +35,6 @@ #include <ide.h> #include <ata.h> -#ifdef CFG_ATA_PIIX /*ata_piix driver */ - extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE]; extern int curr_device; @@ -756,5 +754,3 @@ int scan_sata(int dev) { return 0; } - -#endif diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c index a6143df4c0..052c3d3671 100644 --- a/drivers/block/sil680.c +++ b/drivers/block/sil680.c @@ -27,7 +27,7 @@ * The following parameters must be defined in the configuration file * of the target board: * - * #define CFG_IDE_SIL680 + * #define CONFIG_IDE_SIL680 * * #define CONFIG_PCI_PNP * NOTE it may also be necessary to define this if the default of 8 is @@ -54,7 +54,6 @@ */ #include <common.h> -#if defined(CFG_IDE_SIL680) #include <ata.h> #include <ide.h> #include <pci.h> @@ -106,5 +105,3 @@ int ide_preinit (void) void ide_set_reset (int flag) { return; } - -#endif /* CFG_IDE_SIL680 */ diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index b880435f1e..44e998b556 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -35,8 +35,6 @@ #include <common.h> -#ifdef CONFIG_SCSI_SYM53C8XX - #include <command.h> #include <pci.h> #include <asm/processor.h> @@ -870,6 +868,3 @@ void scsi_chip_init(void) #endif } #endif - - -#endif /* CONFIG_SCSI_SYM53C8XX */ diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c index 7d82c27c6e..dfaab528bf 100644 --- a/drivers/block/systemace.c +++ b/drivers/block/systemace.c @@ -44,8 +44,6 @@ #include <part.h> #include <asm/io.h> -#ifdef CONFIG_SYSTEMACE - /* * The ace_readw and writew functions read/write 16bit words, but the * offset value is the BYTE offset as most used in the Xilinx @@ -255,4 +253,3 @@ static unsigned long systemace_read(int dev, unsigned long start, return blkcnt; } -#endif /* CONFIG_SYSTEMACE */ diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index 0e830b878d..e29655e636 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -178,7 +178,7 @@ #define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */ #define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ #define CFG_SATA_MAX_DEVICE (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) -#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */ +#define CONFIG_ATA_PIIX 1 /*Supports ata_piix driver */ /************************************************************ * DISK Partition support |