Merge with git://www.denx.de/git/u-boot.git

21 files changed, 164 insertions, 124 deletions

diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 29e6101a15..9780fe15c0 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -35,18 +35,18 @@
 #define MSR_DWE         (1<<10)         /* Debug Wait Enable (4xx) */
 #define MSR_UBLE        (1<<10)         /* BTB lock enable (e500) */
 #define MSR_BE		(1<<9)		/* Branch Trace */
-#define MSR_DE		(1<<9) 		/* Debug Exception Enable */
+#define MSR_DE		(1<<9)		/* Debug Exception Enable */
 #define MSR_FE1		(1<<8)		/* Floating Exception mode 1 */
 #define MSR_IP		(1<<6)		/* Exception prefix 0x000/0xFFF */
-#define MSR_IR		(1<<5) 		/* Instruction Relocate */
+#define MSR_IR		(1<<5)		/* Instruction Relocate */
 #define MSR_IS          (1<<5)          /* Book E Instruction space */
-#define MSR_DR		(1<<4) 		/* Data Relocate */
+#define MSR_DR		(1<<4)		/* Data Relocate */
 #define MSR_DS          (1<<4)          /* Book E Data space */
 #define MSR_PE		(1<<3)		/* Protection Enable */
 #define MSR_PX		(1<<2)		/* Protection Exclusive Mode */
 #define MSR_PMM         (1<<2)          /* Performance monitor mark bit (e500) */
 #define MSR_RI		(1<<1)		/* Recoverable Exception */
-#define MSR_LE		(1<<0) 		/* Little Endian */
+#define MSR_LE		(1<<0)		/* Little Endian */
 
 #ifdef CONFIG_APUS_FAST_EXCEPT
 #define MSR_		MSR_ME|MSR_IP|MSR_RI
@@ -123,9 +123,9 @@
 #define   DBCR_EDM	0x80000000
 #define   DBCR_IDM	0x40000000
 #define   DBCR_RST(x)	(((x) & 0x3) << 28)
-#define     DBCR_RST_NONE       	0
-#define     DBCR_RST_CORE       	1
-#define     DBCR_RST_CHIP       	2
+#define     DBCR_RST_NONE		0
+#define     DBCR_RST_CORE		1
+#define     DBCR_RST_CHIP		2
 #define     DBCR_RST_SYSTEM		3
 #define   DBCR_IC	0x08000000	/* Instruction Completion Debug Evnt */
 #define   DBCR_BT	0x04000000	/* Branch Taken Debug Event */
@@ -266,7 +266,7 @@
 #define SPRN_ICMP	0x3D5	/* Instruction TLB Compare Register */
 #define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
 #define SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
-#define SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
+#define SPRN_IMMR	0x27E	/* Internal Memory Map Register */
 #define SPRN_LDSTCR	0x3F8   /* Load/Store Control Register */
 #define SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define SPRN_LR		0x008	/* Link Register */
@@ -495,17 +495,17 @@
 #define DBCR0	SPRN_DBCR0	/* Debug Control Register 0 */
 #define DBCR1	SPRN_DBCR1	/* Debug Control Register 1 */
 #define DBSR	SPRN_DBSR	/* Debug Status Register */
-#define DCMP	SPRN_DCMP      	/* Data TLB Compare Register */
-#define DEC	SPRN_DEC       	/* Decrement Register */
-#define DMISS	SPRN_DMISS     	/* Data TLB Miss Register */
+#define DCMP	SPRN_DCMP	/* Data TLB Compare Register */
+#define DEC	SPRN_DEC	/* Decrement Register */
+#define DMISS	SPRN_DMISS	/* Data TLB Miss Register */
 #define DSISR	SPRN_DSISR	/* Data Storage Interrupt Status Register */
-#define EAR	SPRN_EAR       	/* External Address Register */
+#define EAR	SPRN_EAR	/* External Address Register */
 #define ESR	SPRN_ESR	/* Exception Syndrome Register */
 #define HASH1	SPRN_HASH1	/* Primary Hash Address Register */
 #define HASH2	SPRN_HASH2	/* Secondary Hash Address Register */
 #define HID0	SPRN_HID0	/* Hardware Implementation Register 0 */
 #define HID1	SPRN_HID1	/* Hardware Implementation Register 1 */
-#define IABR	SPRN_IABR      	/* Instruction Address Breakpoint Register */
+#define IABR	SPRN_IABR	/* Instruction Address Breakpoint Register */
 #define IAC1	SPRN_IAC1	/* Instruction Address Register 1 */
 #define IAC2	SPRN_IAC2	/* Instruction Address Register 2 */
 #define IBAT0L	SPRN_IBAT0L	/* Instruction BAT 0 Lower Register */
@@ -522,13 +522,13 @@
 #define IBAT5U	SPRN_IBAT5U	/* Instruction BAT 5 Upper Register */
 #define IBAT6L	SPRN_IBAT6L	/* Instruction BAT 6 Lower Register */
 #define IBAT6U	SPRN_IBAT6U	/* Instruction BAT 6 Upper Register */
-#define IBAT7L 	SPRN_IBAT7L	/* Instruction BAT 7 Lower Register */
+#define IBAT7L	SPRN_IBAT7L	/* Instruction BAT 7 Lower Register */
 #define IBAT7U	SPRN_IBAT7U	/* Instruction BAT 7 Lower Register */
 #define ICMP	SPRN_ICMP	/* Instruction TLB Compare Register */
 #define IMISS	SPRN_IMISS	/* Instruction TLB Miss Register */
-#define IMMR	SPRN_IMMR      	/* PPC 860/821 Internal Memory Map Register */
+#define IMMR	SPRN_IMMR	/* PPC 860/821 Internal Memory Map Register */
 #define LDSTCR	SPRN_LDSTCR     /* Load/Store Control Register */
-#define L2CR	SPRN_L2CR    	/* PPC 750 L2 control register */
+#define L2CR	SPRN_L2CR	/* PPC 750 L2 control register */
 #define LR	SPRN_LR
 #define MBAR    SPRN_MBAR       /* System memory base address */
 #if defined(CONFIG_MPC86xx)
@@ -540,7 +540,7 @@
 #define SVR	SPRN_SVR	/* System-On-Chip Version Register */
 #define PVR	SPRN_PVR	/* Processor Version */
 #define RPA	SPRN_RPA	/* Required Physical Address Register */
-#define SDR1	SPRN_SDR1      	/* MMU hash base register */
+#define SDR1	SPRN_SDR1	/* MMU hash base register */
 #define SPR0	SPRN_SPRG0	/* Supervisor Private Registers */
 #define SPR1	SPRN_SPRG1
 #define SPR2	SPRN_SPRG2
@@ -611,7 +611,7 @@
 #define IVOR35	SPRN_IVOR35
 #define MCSRR0	SPRN_MCSRR0
 #define MCSRR1	SPRN_MCSRR1
-#define L1CSR0 	SPRN_L1CSR0
+#define L1CSR0	SPRN_L1CSR0
 #define L1CSR1	SPRN_L1CSR1
 #define MCSR	SPRN_MCSR
 #define MMUCSR0	SPRN_MMUCSR0
@@ -620,7 +620,7 @@
 #define PID1	SPRN_PID1
 #define PID2	SPRN_PID2
 #define MAS0	SPRN_MAS0
-#define MAS1 	SPRN_MAS1
+#define MAS1	SPRN_MAS1
 #define MAS2	SPRN_MAS2
 #define MAS3	SPRN_MAS3
 #define MAS4	SPRN_MAS4
@@ -632,7 +632,7 @@
 
 #define DCRN_BEAR	0x090	/* Bus Error Address Register */
 #define DCRN_BESR	0x091	/* Bus Error Syndrome Register */
-#define   BESR_DSES    	0x80000000	/* Data-Side Error Status */
+#define   BESR_DSES	0x80000000	/* Data-Side Error Status */
 #define   BESR_DMES	0x40000000	/* DMA Error Status */
 #define   BESR_RWS	0x20000000	/* Read/Write Status */
 #define   BESR_ETMASK	0x1C000000	/* Error Type */
@@ -689,8 +689,8 @@
 #define   IOCR_E3LP	0x01000000
 #define   IOCR_E4TE	0x00800000
 #define   IOCR_E4LP	0x00400000
-#define   IOCR_EDT     	0x00080000
-#define   IOCR_SOR     	0x00040000
+#define   IOCR_EDT	0x00080000
+#define   IOCR_SOR	0x00040000
 #define   IOCR_EDO	0x00008000
 #define   IOCR_2XC	0x00004000
 #define   IOCR_ATC	0x00002000
@@ -815,7 +815,7 @@
 #define PVR_823		PVR_821
 #define PVR_850		PVR_821
 #define PVR_860		PVR_821
-#define PVR_7400       	0x000C0000
+#define PVR_7400	0x000C0000
 #define PVR_8240	0x00810100
 
 /*
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 9da1d884b1..aa3627b4d7 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -44,7 +44,7 @@
 
 #define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH 	*/
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
@@ -238,7 +238,7 @@
 	"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0"			\
 	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
 #else
-#define CUSTOM_ENV_SETTINGS 						\
+#define CUSTOM_ENV_SETTINGS						\
 	"bootfile=cam5200/uImage\0"					\
 	"u-boot=cam5200/u-boot.bin\0"					\
 	"setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index a7b99f72c0..df057d9c95 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -95,7 +95,7 @@
 
 #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
@@ -257,7 +257,7 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_MX_CYCLIC     	1       /* enable mdc/mwc commands      */
+#define CONFIG_MX_CYCLIC	1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index a1b5682abf..d58344d717 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -74,9 +74,9 @@
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
 #define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CFG_INIT_RAM_ADDR	0x70000000	/* DCache       */
 #define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		    	/* num bytes initial data	*/
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data	*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
@@ -115,8 +115,8 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	256		    /* sectors per device   */
+#define CFG_MAX_FLASH_BANKS	3	/* number of banks			*/
+#define CFG_MAX_FLASH_SECT	256	/* sectors per device			*/
 
 #undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
@@ -126,11 +126,11 @@
 #define CFG_FLASH_ADDR1         0x2aa
 #define CFG_FLASH_WORD_SIZE     unsigned char
 
-#define CFG_FLASH_2ND_16BIT_DEV 1         /* bamboo has 8 and 16bit device      */
-#define CFG_FLASH_2ND_ADDR      0x87800000  /* bamboo has 8 and 16bit device    */
+#define CFG_FLASH_2ND_16BIT_DEV 1	/* bamboo has 8 and 16bit device	*/
+#define CFG_FLASH_2ND_ADDR      0x87800000  /* bamboo has 8 and 16bit device	*/
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 70b199218d..4a1385ccb9 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -122,7 +122,7 @@
 #define CFG_FLASH_WORD_SIZE     unsigned char
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 9bfc0b56a5..c6f67fee44 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -117,7 +117,7 @@
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 #define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_SECT_SIZE	0x40000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x40000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
@@ -359,7 +359,7 @@
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13				*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14				*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4)   			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4)			*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5)			*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6)			*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7)			*/	\
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index bc8ee1c6f1..68e8cec251 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -137,7 +137,7 @@
 #define CFG_FLASH_WORD_SIZE     unsigned char
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 544c1b83de..22f9f84ec2 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -285,7 +285,7 @@
 
 #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 5c73658951..751b51277c 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -104,7 +104,7 @@
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index e4f0ac8c9a..44bc955519 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -59,6 +59,7 @@
 #define CFG_MONITOR_BASE	TEXT_BASE
 #define CFG_NAND_ADDR		0xd0000000      /* NAND Flash		*/
 #define CFG_OCM_BASE		0xe0010000      /* ocm			*/
+#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
 #define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
 #define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
 #define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
@@ -81,7 +82,7 @@
 #define CFG_INIT_RAM_END	(4 << 10)
 #define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -126,7 +127,7 @@
 #define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
@@ -328,6 +329,18 @@
 			       CFG_CMD_SDRAM	|	\
 			       CMD_USB)
 
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY   | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_UART	   | \
+				 CFG_POST_I2C	   | \
+				 CFG_POST_SPR)
+
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_LOGBUFFER
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
 #define CONFIG_SUPPORT_VFAT
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index b9936fb155..d756be7165 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -218,8 +218,8 @@
 #define CONFIG_EMAC_NR_START	2	/* start with EMAC 2 (skip 0&1)	*/
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_NET_MULTI	1
-#define CONFIG_PHY_ADDR	      	0xff	     /* no phy on EMAC0		*/
-#define CONFIG_PHY1_ADDR      	0xff	     /* no phy on EMAC1		*/
+#define CONFIG_PHY_ADDR		0xff	     /* no phy on EMAC0		*/
+#define CONFIG_PHY1_ADDR	0xff	     /* no phy on EMAC1		*/
 #define CONFIG_PHY2_ADDR	0x1
 #define CONFIG_PHY3_ADDR	0x3
 #define CONFIG_ET1011C_PHY	1
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 6e01244008..3b106efdf5 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -123,7 +123,7 @@
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
diff --git a/include/logbuff.h b/include/logbuff.h
index 3acfc18a78..d415729053 100644
--- a/include/logbuff.h
+++ b/include/logbuff.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2007
  * Detlev Zundel, dzu@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -25,6 +25,7 @@
 
 #ifdef CONFIG_LOGBUFFER
 
+#define LOGBUFF_MAGIC	0xc0de4ced	/* Forced by code, eh!	*/
 #define LOGBUFF_LEN	(16384)	/* Must be 16k right now */
 #define LOGBUFF_MASK	(LOGBUFF_LEN-1)
 #define LOGBUFF_OVERHEAD (4096) /* Logbuffer overhead for extra info */
@@ -32,6 +33,29 @@
 
 #define LOGBUFF_INITIALIZED	(1<<31)
 
+/* The mapping used here has to be the same as in setup_ext_logbuff ()
+   in linux/kernel/printk */
+
+typedef struct {
+	union {
+		struct {
+			unsigned long	tag;
+			unsigned long	start;
+			unsigned long	con;
+			unsigned long	end;
+			unsigned long	chars;
+		} v2;
+		struct {
+			unsigned long	dummy;
+			unsigned long	tag;
+			unsigned long	start;
+			unsigned long	size;
+			unsigned long	chars;
+		} v1;
+	};
+	unsigned char	buf[0];
+} logbuff_t;
+
 int drv_logbuff_init (void);
 void logbuff_init_ptrs (void);
 void logbuff_log(char *msg);
diff --git a/include/mpc5xx.h b/include/mpc5xx.h
index e9b08a0dc7..414651fa0f 100644
--- a/include/mpc5xx.h
+++ b/include/mpc5xx.h
@@ -76,10 +76,10 @@
 #define SIUMCR_DBPC01	0x00080000	/* - " -				*/
 #define SIUMCR_DBPC10	0x00100000	/* - " -				*/
 #define SIUMCR_DBPC11	0x00180000	/* - " -				*/
-#define SIUMCR_GPC00	0x00000000	/* General Pins Config 			*/
-#define SIUMCR_GPC01	0x00020000	/* General Pins Config 			*/
-#define SIUMCR_GPC10	0x00040000	/* General Pins Config 			*/
-#define SIUMCR_GPC11	0x00060000	/* General Pins Config 			*/
+#define SIUMCR_GPC00	0x00000000	/* General Pins Config			*/
+#define SIUMCR_GPC01	0x00020000	/* General Pins Config			*/
+#define SIUMCR_GPC10	0x00040000	/* General Pins Config			*/
+#define SIUMCR_GPC11	0x00060000	/* General Pins Config			*/
 #define SIUMCR_DLK	0x00010000	/* Debug Register Lock			*/
 #define SIUMCR_SC00	0x00000000	/* Multi Chip 32 bit			*/
 #define SIUMCR_SC01	0x00004000	/* Muilt Chip 16 bit			*/
@@ -90,7 +90,7 @@
 #define SIUMCR_MLRC01	0x00000400	/* - " -				*/
 #define SIUMCR_MLRC10	0x00000800	/* - " -				*/
 #define SIUMCR_MLRC11	0x00000c00	/* - " -				*/
-#define SIUMCR_MTSC	0x00000100	/* Memory transfer      		*/
+#define SIUMCR_MTSC	0x00000100	/* Memory transfer			*/
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control Register
@@ -123,13 +123,13 @@
  * SCCR - System Clock and reset Control Register
  */
 #define SCCR_DFNL_MSK	0x00000070	/* DFNL mask				*/
-#define SCCR_DFNH_MSK	0x00000007  	/* DFNH mask				*/
+#define SCCR_DFNH_MSK	0x00000007	/* DFNH mask				*/
 #define SCCR_DFNL_SHIFT 0x0000004	/* DFNL shift value			*/
 #define SCCR_RTSEL	0x00100000	/* RTC circuit input source select	*/
 #define SCCR_EBDF00	0x00000000	/* Division factor 1. CLKOUT is GCLK2   */
 #define SCCR_EBDF11	0x00060000	/* reserved				*/
 #define SCCR_TBS	0x02000000	/* Time Base Source			*/
-#define SCCR_RTDIV	0x01000000	/* RTC Clock Divide 			*/
+#define SCCR_RTDIV	0x01000000	/* RTC Clock Divide			*/
 #define SCCR_COM00	0x00000000	/* full strength CLKOUT output buffer	*/
 #define SCCR_COM01	0x20000000	/* half strength CLKOUT output buffer	*/
 #define SCCR_DFNL000	0x00000000	/* Division by 2 (default = minimum)	*/
@@ -138,11 +138,11 @@
 /*-----------------------------------------------------------------------
  * MC - Memory Controller
  */
-#define BR_V		0x00000001	/* Bank valid 				*/
-#define BR_BI		0x00000002	/* Burst inhibit 			*/
-#define BR_PS_8		0x00000400	/* 8 bit port size 			*/
-#define BR_PS_16	0x00000800	/* 16 bit port size 			*/
-#define BR_PS_32	0x00000000	/* 32 bit port size 			*/
+#define BR_V		0x00000001	/* Bank valid				*/
+#define BR_BI		0x00000002	/* Burst inhibit			*/
+#define BR_PS_8		0x00000400	/* 8 bit port size			*/
+#define BR_PS_16	0x00000800	/* 16 bit port size			*/
+#define BR_PS_32	0x00000000	/* 32 bit port size			*/
 #define BR_LBDIR	0x00000008	/* Late burst data in progess		*/
 #define BR_SETA		0x00000004	/* External Data Acknowledge		*/
 #define OR_SCY_3	0x00000030	/* 3 clock cycles wait states		*/
@@ -159,8 +159,8 @@
 /*-----------------------------------------------------------------------
  * UMCR - UIMB Module Configuration Register
  */
-#define UMCR_FSPEED 	0x00000000	/* Full speed. Opposit of UMCR_HSPEED	*/
-#define UMCR_HSPEED 	0x10000000	/* Half speed				*/
+#define UMCR_FSPEED	0x00000000	/* Full speed. Opposit of UMCR_HSPEED	*/
+#define UMCR_HSPEED	0x10000000	/* Half speed				*/
 
 /*-----------------------------------------------------------------------
  * ICTRL - I-Bus Support Control Register
@@ -174,16 +174,16 @@
  * SCI - Serial communication interface
  */
 
-#define SCI_TDRE	0x0100		/* Transmit data register empty 	*/
-#define SCI_TE		0x0008		/* Transmitter enabled 			*/
+#define SCI_TDRE	0x0100		/* Transmit data register empty		*/
+#define SCI_TE		0x0008		/* Transmitter enabled			*/
 #define SCI_RE		0x0004		/* Receiver enabled			*/
-#define SCI_RDRF	0x0040		/* Receive data register full 		*/
-#define SCI_PE		0x0400		/* Parity enable 			*/
-#define SCI_SCXBR_MK	0x1fff		/* Baudrate mask 			*/
-#define SCI_SCXDR_MK	0x00ff		/* Data register mask 			*/
+#define SCI_RDRF	0x0040		/* Receive data register full		*/
+#define SCI_PE		0x0400		/* Parity enable			*/
+#define SCI_SCXBR_MK	0x1fff		/* Baudrate mask			*/
+#define SCI_SCXDR_MK	0x00ff		/* Data register mask			*/
 #define SCI_M_11	0x0200		/* Frame size is 11 bit			*/
 #define SCI_M_10	0x0000		/* Frame size is 10 bit			*/
-#define SCI_PORT_1	((int)1)	/* Place this later somewhere better 	*/
+#define SCI_PORT_1	((int)1)	/* Place this later somewhere better	*/
 #define SCI_PORT_2	((int)2)
 
 #endif	/* __MPC5XX_H__ */
diff --git a/include/mpc824x.h b/include/mpc824x.h
index 4bd8863481..30f01d5aa8 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -88,7 +88,7 @@
 #define	PREP_PCI_MEMORY_BUS	0x80000000
 #define	PREP_PCI_MEMORY_SIZE	0x80000000
 #define MPC107_PCI_CMD		0x80000004	/* MPC107 PCI cmd reg */
-#define MPC107_PCI_STAT 	0x80000006	/* MPC107 PCI status reg */
+#define MPC107_PCI_STAT		0x80000006	/* MPC107 PCI status reg */
 #define PROC_INT1_ADR		0x800000a8	/* MPC107 Processor i/f cfg1 */
 #define PROC_INT2_ADR		0x800000ac	/* MPC107 Processor i/f cfg2 */
 #define MEM_CONT1_ADR		0x800000f0	/* MPC107 Memory control config. 1 */
@@ -98,8 +98,8 @@
 #define MEM_ERREN1_ADR		0x800000c0	/* MPC107 Memory error enable 1 */
 #define MEM_START1_ADR		0x80000080	/* MPC107 Memory starting addr */
 #define MEM_START2_ADR		0x80000084	/* MPC107 Memory starting addr-lo */
-#define XMEM_START1_ADR 	0x80000088	/* MPC107 Extended mem. start addr-hi*/
-#define XMEM_START2_ADR 	0x8000008c	/* MPC107 Extended mem. start addr-lo*/
+#define XMEM_START1_ADR		0x80000088	/* MPC107 Extended mem. start addr-hi*/
+#define XMEM_START2_ADR		0x8000008c	/* MPC107 Extended mem. start addr-lo*/
 #define MEM_END1_ADR		0x80000090	/* MPC107 Memory ending address */
 #define MEM_END2_ADR		0x80000094	/* MPC107 Memory ending addr-lo */
 #define XMEM_END1_ADR		0x80000098	/* MPC107 Extended mem. end addrs-hi */
diff --git a/include/mpc8260.h b/include/mpc8260.h
index b61218ccc2..052529409a 100644
--- a/include/mpc8260.h
+++ b/include/mpc8260.h
@@ -664,7 +664,7 @@
 #define PSDMR_CL_3	     0x00000003	/* CAS Latency = 3		*/
 
 /*-----------------------------------------------------------------------
- * LSDMR - Local Bus SDRAM Mode Register			 	10-24
+ * LSDMR - Local Bus SDRAM Mode Register				10-24
  */
 
 /*
@@ -707,23 +707,23 @@
 /*-----------------------------------------------------------------------
  * TMR1-TMR4 - Timer Mode Registers					17-6
  */
-#define TMRx_PS_MSK		0xff00	/* Prescaler Value 		*/
+#define TMRx_PS_MSK		0xff00	/* Prescaler Value		*/
 #define TMRx_CE_MSK		0x00c0	/* Capture Edge and Enable Interrupt*/
-#define TMRx_OM			0x0020	/* Output Mode 			*/
+#define TMRx_OM			0x0020	/* Output Mode			*/
 #define TMRx_ORI		0x0010	/* Output Reference Interrupt Enable*/
-#define TMRx_FRR		0x0008	/* Free Run/Restart 		*/
+#define TMRx_FRR		0x0008	/* Free Run/Restart		*/
 #define TMRx_ICLK_MSK		0x0006	/* Timer Input Clock Source mask */
-#define TMRx_GE			0x0001	/* Gate Enable  		*/
+#define TMRx_GE			0x0001	/* Gate Enable			*/
 
 #define TMRx_CE_INTR_DIS	0x0000	/* Disable Interrupt on capture event*/
 #define TMRx_CE_RISING		0x0040	/* Capture on Rising TINx edge only */
 #define TMRx_CE_FALLING		0x0080	/* Capture on Falling TINx edge only */
-#define TMRx_CE_ANY		0x00c0	/* Capture on any TINx edge 	*/
+#define TMRx_CE_ANY		0x00c0	/* Capture on any TINx edge	*/
 
-#define TMRx_ICLK_IN_CAS	0x0000	/* Internally cascaded input 	*/
+#define TMRx_ICLK_IN_CAS	0x0000	/* Internally cascaded input	*/
 #define TMRx_ICLK_IN_GEN	0x0002	/* Internal General system clock*/
 #define TMRx_ICLK_IN_GEN_DIV16	0x0004	/* Internal General system clk div 16*/
-#define TMRx_ICLK_TIN_PIN	0x0006	/* TINx pin 			*/
+#define TMRx_ICLK_TIN_PIN	0x0006	/* TINx pin			*/
 
 
 /*-----------------------------------------------------------------------
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index cbf41c3a93..336c0ac4f2 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -439,9 +439,9 @@
 #define HRCWH_ROM_LOC_LOCAL_32BIT	0x00700000
 
 #if defined(CONFIG_MPC831X)
-#define HRCWH_ROM_LOC_NAND_SP_8BIT 	0x00100000
+#define HRCWH_ROM_LOC_NAND_SP_8BIT	0x00100000
 #define HRCWH_ROM_LOC_NAND_SP_16BIT	0x00200000
-#define HRCWH_ROM_LOC_NAND_LP_8BIT 	0x00500000
+#define HRCWH_ROM_LOC_NAND_LP_8BIT	0x00500000
 #define HRCWH_ROM_LOC_NAND_LP_16BIT	0x00600000
 
 #define HRCWH_RL_EXT_LEGACY		0x00000000
@@ -1218,7 +1218,7 @@
 #define FCR_CMD1		0x00FF0000
 #define FCR_CMD1_SHIFT		16
 #define FCR_CMD2		0x0000FF00
-#define FCR_CMD2_SHIFT   	8
+#define FCR_CMD2_SHIFT		8
 #define FCR_CMD3		0x000000FF
 #define FCR_CMD3_SHIFT		0
 
@@ -1242,8 +1242,8 @@
 /* LTESR - Transfer Error Status Register
  */
 #define LTESR_BM		0x80000000
-#define LTESR_FCT 		0x40000000
-#define LTESR_PAR 		0x20000000
+#define LTESR_FCT		0x40000000
+#define LTESR_PAR		0x20000000
 #define LTESR_WP		0x04000000
 #define LTESR_ATMW		0x00800000
 #define LTESR_ATMR		0x00400000
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 11305987f8..bef748f900 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -208,12 +208,12 @@
 #define SCCR_DFBRG10	0x00001000	/* BRGCLK division by 16		*/
 #define SCCR_DFBRG11	0x00001800	/* BRGCLK division by 64		*/
 #define SCCR_DFNL000	0x00000000	/* Division by 2 (default = minimum)	*/
-#define SCCR_DFNL001	0x00000100	/* Division by 4 	                */
-#define SCCR_DFNL010	0x00000200	/* Division by 8 	                */
-#define SCCR_DFNL011	0x00000300	/* Division by 16 	                */
-#define SCCR_DFNL100	0x00000400	/* Division by 32 	                */
-#define SCCR_DFNL101	0x00000500	/* Division by 64 	                */
-#define SCCR_DFNL110	0x00000600	/* Division by 128 	                */
+#define SCCR_DFNL001	0x00000100	/* Division by 4	                */
+#define SCCR_DFNL010	0x00000200	/* Division by 8	                */
+#define SCCR_DFNL011	0x00000300	/* Division by 16	                */
+#define SCCR_DFNL100	0x00000400	/* Division by 32	                */
+#define SCCR_DFNL101	0x00000500	/* Division by 64	                */
+#define SCCR_DFNL110	0x00000600	/* Division by 128	                */
 #define SCCR_DFNL111	0x00000700	/* Division by 256 (maximum)		*/
 #define SCCR_DFNH000	0x00000000	/* Division by 1 (default = minimum)	*/
 #define SCCR_DFNH110	0x000000D0	/* Division by 64 (maximum)		*/
diff --git a/include/post.h b/include/post.h
index cdefbddb6f..8259e5d2ea 100644
--- a/include/post.h
+++ b/include/post.h
@@ -91,6 +91,7 @@ extern int post_hotkeys_pressed(void);
 #define CFG_POST_SYSMON		0x00000800
 #define CFG_POST_DSP		0x00001000
 #define CFG_POST_CODEC		0x00002000
+#define CFG_POST_FPU		0x00004000
 
 #endif /* CONFIG_POST */
 
diff --git a/include/ppc405.h b/include/ppc405.h
index 6be2a50db7..8e64731929 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -143,12 +143,12 @@
 #define UIC_USBH1	0x00040000	/* USB Host 1			*/
 #define UIC_USBH2	0x00020000	/* USB Host 2			*/
 #define UIC_USBDEV	0x00010000	/* USB Device			*/
-#define UIC_ENET	0x00008000	/* Ethernet interrupt status 	*/
-#define UIC_ENET1	0x00008000	/* dummy define              	*/
+#define UIC_ENET	0x00008000	/* Ethernet interrupt status	*/
+#define UIC_ENET1	0x00008000	/* dummy define			*/
 #define UIC_EMAC_WAKE	0x00004000	/* EMAC wake up			*/
 
 #define UIC_MADMAL	0x00002000	/* Logical OR of following MadMAL int */
-#define UIC_MAL_SERR 	0x00002000	/*   MAL SERR			*/
+#define UIC_MAL_SERR	0x00002000	/*   MAL SERR			*/
 #define UIC_MAL_TXDE	0x00002000	/*   MAL TXDE			*/
 #define UIC_MAL_RXDE	0x00002000	/*   MAL RXDE			*/
 
@@ -886,7 +886,7 @@
 #define cntrl0  (CNTRL_DCR_BASE+0x1)  /* Control 0 register                  */
 #define cntrl1  (CNTRL_DCR_BASE+0x2)  /* Control 1 register		     */
 #define reset   (CNTRL_DCR_BASE+0x3)  /* reset register			     */
-#define strap   (CNTRL_DCR_BASE+0x4)  /* strap register		   	     */
+#define strap   (CNTRL_DCR_BASE+0x4)  /* strap register			     */
 
 #define ecr     (0xaa)                /* edge conditioner register (405gpr)  */
 
@@ -1119,13 +1119,13 @@
 | UART Register Offsets
 '----------------------------------------------------------------------------*/
 #define		DATA_REG	0x00
-#define		DL_LSB    	0x00
-#define		DL_MSB  	0x01
+#define		DL_LSB		0x00
+#define		DL_MSB		0x01
 #define		INT_ENABLE      0x01
 #define		FIFO_CONTROL    0x02
 #define		LINE_CONTROL    0x03
 #define		MODEM_CONTROL   0x04
-#define		LINE_STATUS  	0x05
+#define		LINE_STATUS	0x05
 #define		MODEM_STATUS    0x06
 #define		SCRATCH         0x07
 
diff --git a/include/ppc440.h b/include/ppc440.h
index 09f843041d..76330f16ac 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -112,7 +112,7 @@
 #define	 icdbtrh 0x39f	/* instruction cache debug tag register high */
 #define	 mmucr	0x3b2	/* mmu control register */
 #define	 ccr0	0x3b3	/* core configuration register 0 */
-#define  ccr1  	0x378	/* core configuration for 440x5 only */
+#define  ccr1	0x378	/* core configuration for 440x5 only */
 #define	 icdbdr 0x3d3	/* instruction cache debug data register */
 #define	 dbdr	0x3f3	/* debug data register */
 
@@ -136,7 +136,7 @@
 #define clk_opbd	0x00c0
 #define clk_perd	0x00e0
 #define clk_mald	0x0100
-#define clk_spcid   	0x0120
+#define clk_spcid	0x0120
 #define clk_icfg	0x0140
 
 /* 440gx sdr register definations */
@@ -282,6 +282,32 @@
 #define sdr_sdstp3	0x4003
 #endif	/* CONFIG_440GX */
 
+#ifdef CONFIG_440
+/*----------------------------------------------------------------------------+
+| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
++----------------------------------------------------------------------------*/
+#define CCR0_PRE		0x40000000
+#define CCR0_CRPE		0x08000000
+#define CCR0_DSTG		0x00200000
+#define CCR0_DAPUIB		0x00100000
+#define CCR0_DTB		0x00008000
+#define CCR0_GICBT		0x00004000
+#define CCR0_GDCBT		0x00002000
+#define CCR0_FLSTA		0x00000100
+#define CCR0_ICSLC_MASK		0x0000000C
+#define CCR0_ICSLT_MASK		0x00000003
+#define CCR1_TCS_MASK		0x00000080
+#define CCR1_TCS_INTCLK		0x00000000
+#define CCR1_TCS_EXTCLK		0x00000080
+#define MMUCR_SWOA		0x01000000
+#define MMUCR_U1TE		0x00400000
+#define MMUCR_U2SWOAE		0x00200000
+#define MMUCR_DULXE		0x00800000
+#define MMUCR_IULXE		0x00400000
+#define MMUCR_STS		0x00100000
+#define MMUCR_STID_MASK		0x000000FF
+#endif /* CONFIG_440 */
+
 #ifdef CONFIG_440SPE
 #undef sdr_sdstp2
 #define sdr_sdstp2	0x0022
@@ -307,30 +333,6 @@
 #define sdr_sdstp6	0x4005
 #define sdr_sdstp7	0x4007
 
-/*----------------------------------------------------------------------------+
-| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
-+----------------------------------------------------------------------------*/
-#define CCR0_PRE		0x40000000
-#define CCR0_CRPE		0x08000000
-#define CCR0_DSTG		0x00200000
-#define CCR0_DAPUIB		0x00100000
-#define CCR0_DTB		0x00008000
-#define CCR0_GICBT		0x00004000
-#define CCR0_GDCBT		0x00002000
-#define CCR0_FLSTA		0x00000100
-#define CCR0_ICSLC_MASK		0x0000000C
-#define CCR0_ICSLT_MASK		0x00000003
-#define CCR1_TCS_MASK		0x00000080
-#define CCR1_TCS_INTCLK		0x00000000
-#define CCR1_TCS_EXTCLK		0x00000080
-#define MMUCR_SEOA		0x01000000
-#define MMUCR_U1TE		0x00400000
-#define MMUCR_U2SWOAE		0x00200000
-#define MMUCR_DULXE		0x00800000
-#define MMUCR_IULXE		0x00400000
-#define MMUCR_STS		0x00100000
-#define MMUCR_STID_MASK		0x000000FF
-
 #define SDR0_CFGADDR		0x00E
 #define SDR0_CFGDATA		0x00F
 
@@ -684,8 +686,8 @@
 #define SDRAM_CODT_CKSE_SINGLE_END		0x00000008
 #define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END	0x00000004
 #define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END	0x00000002
-#define SDRAM_CODT_IO_HIZ  			0x00000000
-#define SDRAM_CODT_IO_NMODE  			0x00000001
+#define SDRAM_CODT_IO_HIZ			0x00000000
+#define SDRAM_CODT_IO_NMODE			0x00000001
 
 /*-----------------------------------------------------------------------------+
 |  SDRAM Mode Register