OMAP3: Remove legacy NAND defines

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

4 files changed, 0 insertions, 117 deletions

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 3bfc0a21d6..d8c328f1b4 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -141,18 +141,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
@@ -312,21 +300,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 1b30950405..ab014e9502 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -138,18 +138,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
@@ -304,23 +292,6 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 /*----------------------------------------------------------------------------
  * SMSC9115 Ethernet from SMSC9118 family
  *----------------------------------------------------------------------------
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index a8be4e697c..d941497827 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -128,19 +128,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
@@ -299,21 +286,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif				/* __CONFIG_H */
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index b8cb42e505..f9f6480df6 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -131,18 +131,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
@@ -301,21 +289,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif				/* __CONFIG_H */