* Make sure HUSH is initialized for running auto-update scriptsLABEL_2003_10_14_2140

* Make 5200 reset command _really_ reset the board, without running
  any other code after it

* Fix flash mapping and display on P3G4 board

* Patch by Kyle Harris, 15 Jul 2003:
  - add support for Intel IXP425 CPU
  - add support for IXDP425 eval board

3 files changed, 732 insertions, 2 deletions

diff --git a/include/asm-arm/arch-ixp/ixp425.h b/include/asm-arm/arch-ixp/ixp425.h
new file mode 100644
index 0000000000..b82b818e23
--- /dev/null
+++ b/include/asm-arm/arch-ixp/ixp425.h
@@ -0,0 +1,559 @@
+/*
+ * include/asm-arm/arch-ixp425/ixp425.h 
+ *
+ * Register definitions for IXP425 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_ARM_IXP425_H_
+#define _ASM_ARM_IXP425_H_
+
+#define BIT(x)	(1<<(x))
+
+/* FIXME: Only this does work for u-boot... find out why... [RS] */
+#define UBOOT_REG_FIX 1
+#ifdef UBOOT_REG_FIX
+# undef	io_p2v
+# undef __REG
+# ifndef __ASSEMBLY__
+#  define io_p2v(PhAdd)    (PhAdd)
+#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+#  define __REG2(x,y)	(*(volatile u32 *)((u32)&__REG(x) + (y)))	
+# else
+#  define __REG(x) (x)	
+# endif
+#endif /* UBOOT_REG_FIX */
+
+/*
+ * 
+ * IXP425 Memory map:
+ *
+ * Phy		Phy Size	Map Size	Virt		Description
+ * =========================================================================
+ *
+ * 0x00000000	0x10000000					SDRAM 1 
+ *
+ * 0x10000000	0x10000000					SDRAM 2
+ *
+ * 0x20000000	0x10000000					SDRAM 3
+ *
+ * 0x30000000	0x10000000					SDRAM 4 
+ *
+ * The above four are aliases to the same memory location  (0x00000000)
+ *
+ * 0x48000000	 0x4000000					PCI Memory
+ *
+ * 0x50000000	0x10000000			Not Mapped	EXP BUS
+ *
+ * 0x6000000	0x00004000	    0x4000	0xFFFEB000	QMgr
+ *
+ * 0xC0000000	     0x100   	    0x1000	0xFFFDD000	PCI CFG 
+ *
+ * 0xC4000000	     0x100          0x1000	0xFFFDE000	EXP CFG 
+ *
+ * 0xC8000000	    0xC000          0xC000	0xFFFDF000	PERIPHERAL
+ *
+ * 0xCC000000	     0x100   	    0x1000	Not Mapped	SDRAM CFG 
+ */
+
+/*
+ * SDRAM
+ */
+#define IXP425_SDRAM_BASE		(0x00000000)
+#define IXP425_SDRAM_BASE_ALT		(0x10000000)
+
+
+/*
+ * PCI Configuration space
+ */
+#define IXP425_PCI_CFG_BASE_PHYS	(0xC0000000)
+#define IXP425_PCI_CFG_BASE_VIRT	(0xFFFD0000)
+#define IXP425_PCI_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP425_EXP_CFG_BASE_PHYS	(0xC4000000)
+#define IXP425_EXP_CFG_BASE_VIRT	(0xFFFD1000)
+#define IXP425_EXP_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP425_PERIPHERAL_BASE_PHYS	(0xC8000000)
+#define IXP425_PERIPHERAL_BASE_VIRT	(0xFFFD2000)
+#define IXP425_PERIPHERAL_REGION_SIZE	(0x0000C000)
+
+/*
+ * SDRAM configuration registers
+ */
+#define IXP425_SDRAM_CFG_BASE_PHYS	(0xCC000000)
+
+/* 
+ * Q Manager space .. not static mapped
+ */
+#define IXP425_QMGR_BASE_PHYS		(0x60000000)
+#define IXP425_QMGR_BASE_VIRT		(0xFFFDE000)
+#define IXP425_QMGR_REGION_SIZE		(0x00004000)
+
+/*
+ * Expansion BUS
+ *
+ * Expansion Bus 'lives' at either base1 or base 2 depending on the value of
+ * Exp Bus config registers:
+ *
+ * Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero,
+ * and The expansion bus to IXP425_EXP_BUS_BASE2
+ */
+#define IXP425_EXP_BUS_BASE1_PHYS	(0x00000000)
+#define IXP425_EXP_BUS_BASE2_PHYS	(0x50000000)
+#define IXP425_EXP_BUS_BASE2_VIRT	(0xF0000000)
+
+#define IXP425_EXP_BUS_BASE_PHYS	IXP425_EXP_BUS_BASE2_PHYS
+#define IXP425_EXP_BUS_BASE_VIRT	IXP425_EXP_BUS_BASE2_VIRT
+
+#define IXP425_EXP_BUS_REGION_SIZE	(0x08000000)
+#define IXP425_EXP_BUS_CSX_REGION_SIZE	(0x01000000)
+
+#define IXP425_EXP_BUS_CS0_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x00000000)
+#define IXP425_EXP_BUS_CS1_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x01000000)
+#define IXP425_EXP_BUS_CS2_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x02000000)
+#define IXP425_EXP_BUS_CS3_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x03000000)
+#define IXP425_EXP_BUS_CS4_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x04000000)
+#define IXP425_EXP_BUS_CS5_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x05000000)
+#define IXP425_EXP_BUS_CS6_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x06000000)
+#define IXP425_EXP_BUS_CS7_BASE_PHYS	(IXP425_EXP_BUS_BASE2_PHYS + 0x07000000)
+
+#define IXP425_EXP_BUS_CS0_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x00000000)
+#define IXP425_EXP_BUS_CS1_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x01000000)
+#define IXP425_EXP_BUS_CS2_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x02000000)
+#define IXP425_EXP_BUS_CS3_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x03000000)
+#define IXP425_EXP_BUS_CS4_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x04000000)
+#define IXP425_EXP_BUS_CS5_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x05000000)
+#define IXP425_EXP_BUS_CS6_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x06000000)
+#define IXP425_EXP_BUS_CS7_BASE_VIRT	(IXP425_EXP_BUS_BASE2_VIRT + 0x07000000)
+
+#define IXP425_FLASH_WRITABLE	(0x2)
+#define IXP425_FLASH_DEFAULT	(0xbcd23c40)
+#define IXP425_FLASH_WRITE	(0xbcd23c42)
+
+
+#define IXP425_EXP_CS0_OFFSET	0x00
+#define IXP425_EXP_CS1_OFFSET   0x04
+#define IXP425_EXP_CS2_OFFSET   0x08
+#define IXP425_EXP_CS3_OFFSET   0x0C
+#define IXP425_EXP_CS4_OFFSET   0x10
+#define IXP425_EXP_CS5_OFFSET   0x14
+#define IXP425_EXP_CS6_OFFSET   0x18
+#define IXP425_EXP_CS7_OFFSET   0x1C
+#define IXP425_EXP_CFG0_OFFSET	0x20
+#define IXP425_EXP_CFG1_OFFSET	0x24
+#define IXP425_EXP_CFG2_OFFSET	0x28
+#define IXP425_EXP_CFG3_OFFSET	0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#ifndef __ASSEMBLY__
+#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_VIRT+(x)))
+#else
+#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x))
+#endif
+
+#define IXP425_EXP_CS0      IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET)
+#define IXP425_EXP_CS1      IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET)
+#define IXP425_EXP_CS2      IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET) 
+#define IXP425_EXP_CS3      IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET)
+#define IXP425_EXP_CS4      IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET)
+#define IXP425_EXP_CS5      IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET)
+#define IXP425_EXP_CS6      IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET)     
+#define IXP425_EXP_CS7      IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET)
+
+#define IXP425_EXP_CFG0     IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET) 
+#define IXP425_EXP_CFG1     IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET) 
+#define IXP425_EXP_CFG2     IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET) 
+#define IXP425_EXP_CFG3     IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET)
+
+/*
+ * SDRAM Controller registers.
+ */
+#define IXP425_SDR_CONFIG_OFFSET	0x00
+#define IXP425_SDR_REFRESH_OFFSET	0x04
+#define IXP425_SDR_IR_OFFSET		0x08
+
+#define IXP425_SDRAM_REG(x) 	(IXP425_SDRAM_CFG_BASE_PHYS+(x))
+
+#define IXP425_SDR_CONFIG	IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
+#define IXP425_SDR_REFRESH     	IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
+#define IXP425_SDR_IR     	IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
+
+/*
+ * UART registers
+ */
+#define IXP425_UART1	0
+#define IXP425_UART2	0x1000
+
+#define IXP425_UART_RBR_OFFSET	0x00
+#define IXP425_UART_THR_OFFSET	0x00
+#define IXP425_UART_DLL_OFFSET	0x00
+#define IXP425_UART_IER_OFFSET	0x04
+#define IXP425_UART_DLH_OFFSET	0x04
+#define IXP425_UART_IIR_OFFSET	0x08
+#define IXP425_UART_FCR_OFFSET	0x00
+#define IXP425_UART_LCR_OFFSET	0x0c
+#define IXP425_UART_MCR_OFFSET	0x10
+#define IXP425_UART_LSR_OFFSET	0x14
+#define IXP425_UART_MSR_OFFSET	0x18
+#define IXP425_UART_SPR_OFFSET	0x1c
+#define IXP425_UART_ISR_OFFSET	0x20
+
+#define IXP425_UART_CFG_BASE_PHYS	(0xc8000000)
+
+#define RBR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET)
+#define THR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET)
+#define DLL(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET)
+#define IER(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET)
+#define DLH(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET)
+#define IIR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET)
+#define FCR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET)
+#define LCR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET)
+#define MCR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET)
+#define LSR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET)
+#define MSR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET)
+#define SPR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET)
+#define ISR(x)		__REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET)
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)	*/ 
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+#define IXP425_CONSOLE_UART_BASE_VIRT IXP425_UART1_BASE_VIRT
+#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS
+/*
+ * Peripheral Space Registers 
+ */
+#define IXP425_UART1_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP425_UART2_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP425_PMU_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP425_INTC_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP425_GPIO_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP425_TIMER_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP425_NPEA_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP425_NPEB_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP425_NPEC_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP425_EthA_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP425_EthB_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP425_USB_BASE_PHYS	(IXP425_PERIPHERAL_BASE_PHYS + 0xB000)
+
+#define IXP425_UART1_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP425_UART2_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP425_PMU_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP425_INTC_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP425_GPIO_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP425_TIMER_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP425_NPEA_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x6000)
+#define IXP425_NPEB_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x7000)
+#define IXP425_NPEC_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x8000)
+#define IXP425_EthA_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP425_EthB_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP425_USB_BASE_VIRT	(IXP425_PERIPHERAL_BASE_VIRT + 0xB000)
+
+
+/* 
+ * UART Register Definitions , Offsets only as there are 2 UARTS.
+ *   IXP425_UART1_BASE , IXP425_UART2_BASE.
+ */
+
+#undef  UART_NO_RX_INTERRUPT
+
+#define IXP425_UART_XTAL        14745600
+
+/*
+ * Constants to make it easy to access  Interrupt Controller registers
+ */
+#define IXP425_ICPR_OFFSET	0x00 /* Interrupt Status */
+#define IXP425_ICMR_OFFSET	0x04 /* Interrupt Enable */
+#define IXP425_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP425_ICIP_OFFSET      0x0C /* IRQ Status */
+#define IXP425_ICFP_OFFSET	0x10 /* FIQ Status */
+#define IXP425_ICHR_OFFSET	0x14 /* Interrupt Priority */
+#define IXP425_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
+#define IXP425_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+#ifndef __ASSEMBLY__
+#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_VIRT+(x)))
+#else
+#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x))
+#endif
+
+#define IXP425_ICPR     IXP425_INTC_REG(IXP425_ICPR_OFFSET)
+#define IXP425_ICMR     IXP425_INTC_REG(IXP425_ICMR_OFFSET)
+#define IXP425_ICLR     IXP425_INTC_REG(IXP425_ICLR_OFFSET)
+#define IXP425_ICIP     IXP425_INTC_REG(IXP425_ICIP_OFFSET)
+#define IXP425_ICFP     IXP425_INTC_REG(IXP425_ICFP_OFFSET)
+#define IXP425_ICHR     IXP425_INTC_REG(IXP425_ICHR_OFFSET)
+#define IXP425_ICIH     IXP425_INTC_REG(IXP425_ICIH_OFFSET) 
+#define IXP425_ICFH     IXP425_INTC_REG(IXP425_ICFH_OFFSET)
+                                                                                
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP425_GPIO_GPOUTR_OFFSET       0x00
+#define IXP425_GPIO_GPOER_OFFSET        0x04
+#define IXP425_GPIO_GPINR_OFFSET        0x08
+#define IXP425_GPIO_GPISR_OFFSET        0x0C
+#define IXP425_GPIO_GPIT1R_OFFSET	0x10
+#define IXP425_GPIO_GPIT2R_OFFSET	0x14
+#define IXP425_GPIO_GPCLKR_OFFSET	0x18
+#define IXP425_GPIO_GPDBSELR_OFFSET	0x1C
+
+/* 
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_VIRT+(x)))
+
+#define IXP425_GPIO_GPOUTR	IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET)
+#define IXP425_GPIO_GPOER       IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET)
+#define IXP425_GPIO_GPINR       IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET)
+#define IXP425_GPIO_GPISR       IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET)
+#define IXP425_GPIO_GPIT1R      IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET)
+#define IXP425_GPIO_GPIT2R      IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET)
+#define IXP425_GPIO_GPCLKR      IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET)
+#define IXP425_GPIO_GPDBSELR    IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP425_OSTS_OFFSET	0x00  /* Continious TimeStamp */
+#define IXP425_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
+#define IXP425_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
+#define IXP425_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
+#define IXP425_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
+#define IXP425_OSWT_OFFSET	0x14  /* Watchdog Timer */
+#define IXP425_OSWE_OFFSET	0x18  /* Watchdog Enable */
+#define IXP425_OSWK_OFFSET	0x1C  /* Watchdog Key */
+#define IXP425_OSST_OFFSET	0x20  /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#ifndef __ASSEMBLY__
+#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x)))
+#else
+#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x))
+#endif
+
+#define IXP425_OSTS	IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
+#define IXP425_OST1	IXP425_TIMER_REG(IXP425_OST1_OFFSET)
+#define IXP425_OSRT1	IXP425_TIMER_REG(IXP425_OSRT1_OFFSET)
+#define IXP425_OST2	IXP425_TIMER_REG(IXP425_OST2_OFFSET)
+#define IXP425_OSRT2	IXP425_TIMER_REG(IXP425_OSRT2_OFFSET)
+#define IXP425_OSWT	IXP425_TIMER_REG(IXP425_OSWT_OFFSET)
+#define IXP425_OSWE	IXP425_TIMER_REG(IXP425_OSWE_OFFSET)
+#define IXP425_OSWK	IXP425_TIMER_REG(IXP425_OSWK_OFFSET)
+#define IXP425_OSST	IXP425_TIMER_REG(IXP425_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions 
+ */
+#define IXP425_OST_ENABLE              BIT(0)
+#define IXP425_OST_ONE_SHOT            BIT(1)
+/* Low order bits of reload value ignored */
+#define IXP425_OST_RELOAD_MASK         (0x3)    
+#define IXP425_OST_DISABLED            (0x0)
+#define IXP425_OSST_TIMER_1_PEND       BIT(0)
+#define IXP425_OSST_TIMER_2_PEND       BIT(1)
+#define IXP425_OSST_TIMER_TS_PEND      BIT(2)
+#define IXP425_OSST_TIMER_WDOG_PEND    BIT(3)
+#define IXP425_OSST_TIMER_WARM_RESET   BIT(4)
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET            0x00
+#define PCI_NP_CBE_OFFSET           0x04
+#define PCI_NP_WDATA_OFFSET         0x08
+#define PCI_NP_RDATA_OFFSET         0x0c
+#define PCI_CRP_AD_CBE_OFFSET       0x10
+#define PCI_CRP_WDATA_OFFSET        0x14
+#define PCI_CRP_RDATA_OFFSET        0x18
+#define PCI_CSR_OFFSET              0x1c
+#define PCI_ISR_OFFSET              0x20
+#define PCI_INTEN_OFFSET            0x24
+#define PCI_DMACTRL_OFFSET          0x28
+#define PCI_AHBMEMBASE_OFFSET       0x2c
+#define PCI_AHBIOBASE_OFFSET        0x30
+#define PCI_PCIMEMBASE_OFFSET       0x34
+#define PCI_AHBDOORBELL_OFFSET      0x38
+#define PCI_PCIDOORBELL_OFFSET      0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD               IXP425_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE              IXP425_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA            IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA            IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE          IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA           IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA           IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR                 IXP425_PCI_CSR(PCI_CSR_OFFSET) 
+#define PCI_ISR                 IXP425_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN               IXP425_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL             IXP425_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE          IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE           IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE          IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL         IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL         IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR     IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR     IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR     IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR     IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR     IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR     IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions 
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST    	BIT(0)
+#define PCI_CSR_ARBEN   	BIT(1)
+#define PCI_CSR_ADS     	BIT(2)
+#define PCI_CSR_PDS     	BIT(3)
+#define PCI_CSR_ABE     	BIT(4)
+#define PCI_CSR_DBT     	BIT(5)
+#define PCI_CSR_ASE     	BIT(8)
+#define PCI_CSR_IC      	BIT(15)
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE     	BIT(0)
+#define PCI_ISR_PFE     	BIT(1)
+#define PCI_ISR_PPE     	BIT(2)
+#define PCI_ISR_AHBE    	BIT(3)
+#define PCI_ISR_APDC    	BIT(4)
+#define PCI_ISR_PADC    	BIT(5)
+#define PCI_ISR_ADB     	BIT(6)
+#define PCI_ISR_PDB     	BIT(7)
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE   	BIT(0)
+#define PCI_INTEN_PFE   	BIT(1)
+#define PCI_INTEN_PPE   	BIT(2)
+#define PCI_INTEN_AHBE  	BIT(3)
+#define PCI_INTEN_APDC  	BIT(4)
+#define PCI_INTEN_PADC  	BIT(5)
+#define PCI_INTEN_ADB   	BIT(6)
+#define PCI_INTEN_PDB   	BIT(7)
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP425_PCI_NP_CBE_BESL		4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD			0x2
+#define NP_CMD_IOWRITE			0x3
+#define NP_CMD_CONFIGREAD		0xa
+#define NP_CMD_CONFIGWRITE		0xb
+#define NP_CMD_MEMREAD			0x6
+#define	NP_CMD_MEMWRITE			0x7
+
+#if 0
+#ifndef __ASSEMBLY__
+extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data);
+extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data);
+extern void ixp425_pci_init(void *);
+#endif
+#endif
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL         20
+#define CRP_AD_CBE_WRITE        BIT(16)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS   */ 
+
+
+#endif
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index 77123842db..b6ebc5fde9 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -154,7 +154,7 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xff800000
+#define CFG_FLASH_BASE		0xff000000
 #define CFG_RESET_ADDRESS	0xfff00100
 #define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CFG_MONITOR_BASE	TEXT_BASE
@@ -348,7 +348,7 @@
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
 #define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
-#define CFG_EXTRA_FLASH_DEVICE	DEVICE0	/* extra flash at device 0 */
+#define CFG_EXTRA_FLASH_DEVICE	BOOT_DEVICE
 #define CFG_EXTRA_FLASH_WIDTH	2	/* 16 bit */
 #define CFG_BOOT_FLASH_WIDTH	2	/* 16 bit */
 
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
new file mode 100644
index 0000000000..3d814d014c
--- /dev/null
+++ b/include/configs/ixdp425.h
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * Configuation settings for the IXDP425 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_IXP425           1       /* This is an IXP425 CPU    */
+#define CONFIG_IXDP425          1       /* on an IXDP425 Board      */
+
+/***************************************************************
+ * U-boot generic defines start here.
+ ***************************************************************/
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL            /* undef for developing */
+
+#undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN      (CFG_ENV_SIZE + 128*1024)
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE         115200
+
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/* These are u-boot generic parameters */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY        3
+#define CONFIG_ETHADDR          08:00:3e:26:0a:5b
+#define CONFIG_NETMASK          255.255.0.0
+#define CONFIG_IPADDR           192.168.0.21
+#define CONFIG_SERVERIP         192.168.0.250
+#define CONFIG_BOOTCOMMAND      "bootm 50040000"
+#define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
+#define CONFIG_CMDLINE_TAG      
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP                            /* undef to save memory         */
+#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS             16              /* max number of command args   */
+#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START       0x00400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR           0x00010000      /* default load address */
+
+#define CFG_HZ                  3333333         /* spec says 66.666 MHz, but it appears to be 33 */
+                                                /* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/***************************************************************
+ * Platform/Board specific defines start here.
+ ***************************************************************/
+
+/*
+ * Hardware drivers
+ */
+
+
+/*
+ * select serial console configuration
+ */
+#define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE       0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1            0x50000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE         0x00800000 /* 8 MB */
+#define PHYS_FLASH_BANK_SIZE    0x00800000 /* 8 MB Banks */
+#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
+
+#define CFG_DRAM_BASE           0x00000000
+#define CFG_DRAM_SIZE           0x01000000
+
+#define CFG_FLASH_BASE          PHYS_FLASH_1
+
+/*
+ * Expansion bus settings
+ */
+#define CFG_EXP_CS0				0xbcd23c42
+
+/*
+ * SDRAM settings
+ */
+#define CFG_SDR_CONFIG			0xd
+#define CFG_SDRAM_REFRESH_CNT 	0x81a
+
+/*
+ * GPIO settings
+ */
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT      128  	/* max number of sectors on one chip    */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT    (25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT    (25*CFG_HZ) /* Timeout for Flash Write */
+
+/* FIXME */
+#define	CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x20000)        /* Addr of Environment Sector   */
+#define CFG_ENV_SIZE            0x20000  /* Total Size of Environment Sector     */
+
+#endif  /* __CONFIG_H */