arm: add support for the suen3 board from keymile

Add support for the ARM part of the mgcoge2, named suen3.
This board is based on the Marvell Kirkwood (88F6281) SoC.
As there come more board variants, common config options
are collected in include/configs/km_arm.h. Also, this board
use common code for all keymile boards, which is stored in
board/keymile/common/common.c

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>

2 files changed, 294 insertions, 0 deletions

diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
new file mode 100644
index 0000000000..a928c2cfbb
--- /dev/null
+++ b/include/configs/km_arm.h
@@ -0,0 +1,191 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* for linking errors see http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
+
+#ifndef _CONFIG_KM_ARM_H
+#define _CONFIG_KM_ARM_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL
+#define CONFIG_ARM926EJS		/* Basic Architecture */
+#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
+#define CONFIG_KIRKWOOD			/* SOC Family Name */
+#define CONFIG_KW88F6281		/* SOC Name */
+#define CONFIG_MACH_SUEN3		/* Machine type */
+
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+#undef CONFIG_CMD_DTT
+#undef CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
+#undef  CONFIG_KIRKWOOD_PCIE_INIT	/* Disable PCIE Port0 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/* Console on UART0 */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_BOOTMAPSZ	(8 << 20)	/* Initial Memmap for Linux */
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
+#define CONFIG_INITRD_TAG		/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 	/* enable memory tag */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+
+/*
+ * Without NOR FLASH we need this
+ */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
+/*
+ * NAND Flash configuration
+ */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS			1
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_NAND_BASE		0xd8000000
+
+#define BOOTFLASH_START		0x0
+
+#define CONFIG_KM_CONSOLE_TTY	"ttyS0"
+
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
+#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO		/* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS	4
+#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_NETCONSOLE	/* include NetConsole support   */
+#define CONFIG_NET_MULTI	/* specify more that one ports available */
+#define CONFIG_MII		/* expose smi ove miiphy interface */
+#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
+#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
+#define CONFIG_RESET_PHY_R	/* use reset_phy() to init 88E1118 PHY */
+
+/*
+ * UBI related stuff
+ */
+#define CONFIG_SYS_USE_UBI
+
+/*
+ * I2C related stuff
+ */
+#undef	CONFIG_HARD_I2C		/* I2C with hardware support */
+#define	CONFIG_SOFT_I2C		/* I2C bit-banged	*/
+
+#if defined(CONFIG_HARD_I2C)
+#define	CONFIG_I2C_KIRKWOOD
+#define	CONFIG_I2C_KW_REG_BASE		KW_TWSI_BASE
+#define	CONFIG_SYS_I2C_SLAVE		0x0
+#define	CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+#define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
+#if defined(CONFIG_SOFT_I2C)
+#ifndef __ASSEMBLY__
+#include <asm/arch-kirkwood/gpio.h>
+extern void __set_direction(unsigned pin, int high);
+void set_sda (int state);
+void set_scl (int state);
+int get_sda (void);
+int get_scl (void);
+#define SUEN3_SDA_PIN	8
+#define SUEN3_SCL_PIN	9
+#define SUEN3_ENV_WP	38
+
+#define I2C_ACTIVE	__set_direction(SUEN3_SDA_PIN, 0)
+#define I2C_TRISTATE	__set_direction(SUEN3_SDA_PIN, 1)
+#define I2C_READ	(kw_gpio_get_value(SUEN3_SDA_PIN) ? 1 : 0)
+#define I2C_SDA(bit)	kw_gpio_set_value(SUEN3_SDA_PIN, bit);
+#define I2C_SCL(bit)	kw_gpio_set_value(SUEN3_SCL_PIN, bit);
+#endif
+
+#define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */
+#define I2C_SOFT_DECLARATIONS
+
+#define	CONFIG_SYS_I2C_SLAVE		0x0
+#define	CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+
+#if defined(CONFIG_SYS_NO_FLASH)
+#define CONFIG_KM_UBI_PARTITION_NAME   "ubi0"
+#undef	CONFIG_FLASH_CFI_MTD
+#undef	CONFIG_JFFS2_CMDLINE
+#endif
+
+#endif /* _CONFIG_KM_ARM_H */
diff --git a/include/configs/suen3.h b/include/configs/suen3.h
new file mode 100644
index 0000000000..b2730a3cec
--- /dev/null
+++ b/include/configs/suen3.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * for linking errors see
+ * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
+ */
+
+#ifndef _CONFIG_SUEN3_H
+#define _CONFIG_SUEN3_H
+
+/* include common defines/options for all arm based Keymile boards */
+#include "km_arm.h"
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING	"\nKeymile SUEN3"
+
+#define CONFIG_HOSTNAME			suen3
+
+/*
+ *  Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_EEPROM		/* use EEPROM for environment vars */
+#define CONFIG_SYS_DEF_EEPROM_ADDR	0x50
+#define CONFIG_ENV_EEPROM_IS_ON_I2C	1
+#define CONFIG_SYS_EEPROM_WREN		1
+#define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
+#undef	CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
+#define CONFIG_I2C_ENV_EEPROM_BUS	"pca9547:70:d\0"
+
+/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
+#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
+
+#define CONFIG_CMD_SF
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_HARD_SPI
+#define CONFIG_KIRKWOOD_SPI
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		50000000	/* 50Mhz */
+
+#define FLASH_GPIO_PIN			0x00010000
+
+#define MTDIDS_DEFAULT		"nand0=orion_nand"
+/* test-only: partitioning needs some tuning, this is just for tests */
+#define MTDPARTS_DEFAULT	"mtdparts="				\
+	"orion_nand:"							\
+		"-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+
+#define	CONFIG_KM_DEF_ENV_UPDATE					\
+	"update="							\
+		"spi on;sf probe 0;sf erase 0 50000;"			\
+		"sf write ${u-boot_addr_r} 0 ${filesize};"		\
+		"spi off\0"
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_KM_DEF_ENV						\
+	"memsize=0x8000000\0"						\
+	"newenv=setenv addr 0x100000 && "				\
+		"i2c dev 1; mw.b ${addr} 0 4 && "			\
+		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
+		" ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "		\
+		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
+		" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"	\
+	"rootpath=/opt/eldk/arm\0"					\
+	"EEprom_ivm=pca9544a:70:9\0"					\
+	""
+
+#endif /* _CONFIG_SUEN3_H */