Blackfin: IP04: new board port

A low cost 4 port IP-PBX board.

Signed-off-by: Brent Kandetzki <BrentK@teleco.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 157 insertions, 0 deletions

diff --git a/include/configs/ip04.h b/include/configs/ip04.h
new file mode 100644
index 0000000000..425a745408
--- /dev/null
+++ b/include/configs/ip04.h
@@ -0,0 +1,157 @@
+/*
+ * U-boot - Configuration file for IP04 board (having BF532 processor)
+ *
+ * Copyright (c) 2006 Intratrade Ltd., Ivan Danov, idanov@gmail.com
+ *
+ * Copyright (c) 2005-2010 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __CONFIG_IP04_H__
+#define __CONFIG_IP04_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf532-0.5
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_NAND
+
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			10000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			40
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			3
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH	10
+#define CONFIG_MEM_SIZE		64
+
+#define CONFIG_EBIU_SDRRC_VAL	0x408
+#define CONFIG_EBIU_SDGCTL_VAL	0x9111cd
+
+#define CONFIG_EBIU_AMGCTL_VAL	0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL	0xffc2ffc2
+#define CONFIG_EBIU_AMBCTL1_VAL	0xffc2ffc2
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
+
+
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HOSTNAME		IP04
+
+#define CONFIG_DRIVER_DM9000	1
+#define CONFIG_DM9000_NO_SROM
+#define CONFIG_DM9000_BASE	0x20100000
+#define DM9000_IO		CONFIG_DM9000_BASE
+#define DM9000_DATA		(CONFIG_DM9000_BASE + 2)
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_SYS_NO_FLASH		/* we have only NAND */
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
+#define CONFIG_SF_DEFAULT_SPEED	30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
+
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_PREBOOT		"echo starting from spi flash"
+#define CONFIG_ENV_OFFSET	0x30000
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+
+
+/*
+ * NAND Settings
+ */
+#define CONFIG_NAND_PLAT
+#define CONFIG_SYS_NAND_BASE		0x20000000
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
+#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
+#define BFIN_NAND_READY     PF10
+#define BFIN_NAND_WRITE(addr, cmd) \
+	do { \
+		bfin_write8(addr, cmd); \
+		SSYNC(); \
+	} while (0)
+
+#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
+#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
+#define NAND_PLAT_DEV_READY(chip)      (bfin_read_FIO_FLAG_D() & BFIN_NAND_READY)
+#define NAND_PLAT_INIT() \
+	do { \
+		bfin_write_FIO_DIR(bfin_read_FIO_DIR() & ~BFIN_NAND_READY); \
+		bfin_write_FIO_INEN(bfin_read_FIO_INEN() | BFIN_NAND_READY); \
+		bfin_write_FIO_EDGE(bfin_read_FIO_EDGE() & ~BFIN_NAND_READY); \
+		bfin_write_FIO_POLAR(bfin_read_FIO_POLAR() & ~BFIN_NAND_READY); \
+	} while (0)
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_MISC_INIT_R	/* needed for MAC address */
+#define CONFIG_UART_CONSOLE	0
+
+#undef CONFIG_SHOW_BOOT_PROGRESS
+/* Enable this if bootretry required; currently it's disabled */
+#define CONFIG_BOOT_RETRY_TIME	-1
+#define CONFIG_BOOTCOMMAND	"run nandboot"
+#define CONFIG_AUTOBOOT_PROMPT	"autoboot in %d seconds\n"
+
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+#endif