[Blackfin][PATCH] code cleanup

2 files changed, 263 insertions, 271 deletions

diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 7afc1a17fe..3e165f2495 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -9,13 +9,13 @@
 #define CONFIG_STAMP		1
 
 #define CONFIG_BOOTDELAY	5
-#define CFG_AUTOLOAD                    "no"    /*rarpb, bootp or dhcp commands will perform only a */
+#define CFG_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
 
-#define CFG_LONGHELP                    1
+#define CFG_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_LOADADDR		0x01000000      /* default load address */
+#define CONFIG_LOADADDR		0x01000000	/* default load address */
 #define CONFIG_BOOTCOMMAND	"tftp $(loadaddr) linux"
-//#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw"
+/* #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw" */
 
 #define CONFIG_DRIVER_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20310300
@@ -32,12 +32,12 @@
  * Boot Mode Set
  * Blackfin can support several boot modes
  */
-#define BF533_BYPASS_BOOT	0x0001  /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
-#define BF533_PARA_BOOT		0x0002  /* Bootmode 1: Boot from 8-bit or 16-bit flash */
-#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash		*/
+#define BF533_BYPASS_BOOT	0x0001	/* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
+#define BF533_PARA_BOOT		0x0002	/* Bootmode 1: Boot from 8-bit or 16-bit flash */
+#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash */
 /* Define the boot mode */
 #define BFIN_BOOT_MODE		BF533_BYPASS_BOOT
-//#define BFIN_BOOT_MODE		BF533_SPI_BOOT
+/* #define BFIN_BOOT_MODE	BF533_SPI_BOOT */
 
 #define CONFIG_PANIC_HANG 1
 
@@ -53,46 +53,46 @@
 /* Define where the uboot will be loaded by on-chip boot rom */
 #define APP_ENTRY 0x00001000
 
-/* CONFIG_CLKIN_HZ is any value in Hz                            */
-#define CONFIG_CLKIN_HZ          27000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
-/*                                                  1=CLKIN/2    */
-#define CONFIG_CLKIN_HALF               0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
-/*                                               1=bypass PLL    */
-#define CONFIG_PLL_BYPASS               0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
-/* Values can range from 1-64                                    */
-#define CONFIG_VCO_MULT			22
-/* CONFIG_CCLK_DIV controls what the core clock divider is       */
-/* Values can be 1, 2, 4, or 8 ONLY                              */
-#define CONFIG_CCLK_DIV			1
+/* CONFIG_CLKIN_HZ is any value in Hz				*/
+#define CONFIG_CLKIN_HZ		27000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
+/*						    1=CLKIN/2	*/
+#define CONFIG_CLKIN_HALF	0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
+/*						 1=bypass PLL	*/
+#define CONFIG_PLL_BYPASS	0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
+/* Values can range from 1-64					*/
+#define CONFIG_VCO_MULT		22
+/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
+/* Values can be 1, 2, 4, or 8 ONLY				*/
+#define CONFIG_CCLK_DIV		1
 /* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15                                    */
-#define CONFIG_SCLK_DIV			5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider     */
-/* Values can range from 2-65535                                 */
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)                  */
-#define CONFIG_SPI_BAUD                 2
-#define CONFIG_SPI_BAUD_INITBLOCK		4
+/* Values can range from 1-15					*/
+#define CONFIG_SCLK_DIV		5
+/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
+/* Values can range from 2-65535				*/
+/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
+#define CONFIG_SPI_BAUD		2
+#define CONFIG_SPI_BAUD_INITBLOCK	4
 
 #if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ           ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
 #else
-#define CONFIG_VCO_HZ           (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
 #endif
 
 #if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
 #else
-#define CONFIG_CCLK_HZ          CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ          CONFIG_CLKIN_HZ
+#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
 #endif
 
-#define CONFIG_MEM_SIZE                 32             /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH              9             /* 8, 9, 10, 11    */
-#define CONFIG_MEM_MT48LC16M16A2TG_75    1
+#define CONFIG_MEM_SIZ		32	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH	9	/* 8, 9, 10, 11    */
+#define CONFIG_MEM_MT48LC16M16A2TG_75	1
 
 #define CONFIG_LOADS_ECHO	1
 
@@ -146,16 +146,16 @@
 #define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
 
 /* JFFS Partition offset set  */
-#define CFG_JFFS2_FIRST_BANK 0
-#define CFG_JFFS2_NUM_BANKS  1
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR                 11
+#define CFG_JFFS2_FIRST_SECTOR	11
 
 
 /*
  * Stack sizes
  */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 
 #define POLL_MODE		1
 #define FLASH_TOT_SECT		40
@@ -171,50 +171,50 @@
  * I2C settings
  * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
  */
-#define CONFIG_SOFT_I2C			1	/* I2C bit-banged		*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged */
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#define PF_SCL				PF0
-#define PF_SDA				PF1
-
-#define I2C_INIT			(*pFIO_DIR |=  PF_SCL); asm("ssync;")
-#define I2C_ACTIVE			(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE			(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ			((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
-#define I2C_SDA(bit)			if(bit) { \
-							*pFIO_FLAG_S = PF_SDA; \
-							asm("ssync;"); \
-						} \
-					else    { \
-							*pFIO_FLAG_C = PF_SDA; \
-							asm("ssync;"); \
-						}
-#define I2C_SCL(bit)			if(bit) { \
-							*pFIO_FLAG_S = PF_SCL; \
-							asm("ssync;"); \
-						} \
-					else    { \
-							*pFIO_FLAG_C = PF_SCL; \
-							asm("ssync;"); \
-						}
-#define I2C_DELAY			udelay(5)	/* 1/4 I2C clock duration */
-
-#define CFG_I2C_SPEED			50000
-#define CFG_I2C_SLAVE			0xFE
+#define PF_SCL			PF0
+#define PF_SDA			PF1
+
+#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
+#define I2C_SDA(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SDA; \
+				asm("ssync;"); \
+				} \
+			else    { \
+				*pFIO_FLAG_C = PF_SDA; \
+				asm("ssync;"); \
+				}
+#define I2C_SCL(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SCL; \
+				asm("ssync;"); \
+				} \
+			else    { \
+				*pFIO_FLAG_C = PF_SCL; \
+				asm("ssync;"); \
+				}
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+
+#define CFG_I2C_SPEED		50000
+#define CFG_I2C_SLAVE		0xFE
 
 #define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
 /* 0xFF, 0x7BB07BB0, 0x22547BB0 */
-/* #define AMGCTLVAL            (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL              (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL |    \
-                                ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
-#define AMBCTL1VAL              (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN |   \
-                                B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
+/* #define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
+				~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
+#define AMBCTL1VAL		(B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \
+				B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
 */
-#define AMGCTLVAL               0xFF
-#define AMBCTL0VAL              0x7BB07BB0
-#define AMBCTL1VAL              0xFFC27BB0
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0x7BB07BB0
+#define AMBCTL1VAL		0xFFC27BB0
 
 #define CONFIG_VDSP		1
 
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 353a43c286..cde2c245c8 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -12,12 +12,12 @@
  * Boot Mode Set
  * Blackfin can support several boot modes
  */
-#define BF533_BYPASS_BOOT	0x0001  /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
-#define BF533_PARA_BOOT		0x0002  /* Bootmode 1: Boot from 8-bit or 16-bit flash */
-#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash		*/
+#define BF533_BYPASS_BOOT	0x0001	/* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
+#define BF533_PARA_BOOT		0x0002	/* Bootmode 1: Boot from 8-bit or 16-bit flash */
+#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash */
 /* Define the boot mode */
 #define BFIN_BOOT_MODE		BF533_BYPASS_BOOT
-//#define BFIN_BOOT_MODE		BF533_SPI_BOOT
+/* #define BFIN_BOOT_MODE	BF533_SPI_BOOT */
 
 #define CONFIG_PANIC_HANG 1
 
@@ -41,65 +41,61 @@
 
 /*
  * Board settings
- *
  */
-#define CONFIG_DRIVER_SMC91111          1
-#define CONFIG_SMC91111_BASE            0x20300300
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x20300300
 
 /* FLASH/ETHERNET uses the same address range */
-#define SHARED_RESOURCES 		1
+#define SHARED_RESOURCES 	1
 
 /* Is I2C bit-banged? */
-#define CONFIG_SOFT_I2C                 1
+#define CONFIG_SOFT_I2C		1
 
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#define PF_SCL                          PF3
-#define PF_SDA                          PF2
+#define PF_SCL			PF3
+#define PF_SDA			PF2
 
 /*
  * Video splash screen support
  */
-#define  CONFIG_VIDEO			0
+#define  CONFIG_VIDEO		0
 
-#define CONFIG_VDSP			1
+#define CONFIG_VDSP		1
 
 /*
  * Clock settings
- *
  */
 
-/* CONFIG_CLKIN_HZ is any value in Hz                            */
-#define CONFIG_CLKIN_HZ			11059200
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
-/*                                                  1=CLKIN/2    */
-#define CONFIG_CLKIN_HALF		0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
-/*                                               1=bypass PLL    */
-#define CONFIG_PLL_BYPASS       	0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
-/* Values can range from 1-64                                    */
-#define CONFIG_VCO_MULT			36
-/* CONFIG_CCLK_DIV controls what the core clock divider is       */
-/* Values can be 1, 2, 4, or 8 ONLY                              */
-#define CONFIG_CCLK_DIV			1
-/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15                                    */
-#define CONFIG_SCLK_DIV			5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider     */
-/* Values can range from 2-65535                                 */
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)                  */
-#define CONFIG_SPI_BAUD                 2
+/* CONFIG_CLKIN_HZ is any value in Hz				*/
+#define CONFIG_CLKIN_HZ		11059200
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
+/*						    1=CLKIN/2	*/
+#define CONFIG_CLKIN_HALF	0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
+/*						 1=bypass PLL	*/
+#define CONFIG_PLL_BYPASS	0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
+/* Values can range from 1-64					*/
+#define CONFIG_VCO_MULT		36
+/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
+/* Values can be 1, 2, 4, or 8 ONLY				*/
+#define CONFIG_CCLK_DIV		1
+/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/
+/* Values can range from 1-15					*/
+#define CONFIG_SCLK_DIV		5
+/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
+/* Values can range from 2-65535				*/
+/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
+#define CONFIG_SPI_BAUD		2
 
 #if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#define CONFIG_SPI_BAUD_INITBLOCK		4
+#define CONFIG_SPI_BAUD_INITBLOCK	4
 #endif
 
-
 /*
  * Network settings
- *
  */
 
 #if (CONFIG_DRIVER_SMC91111)
@@ -108,92 +104,90 @@
 #endif
 
 /* network support */
-#define CONFIG_IPADDR           192.168.0.15
-#define CONFIG_NETMASK          255.255.255.0
-#define CONFIG_GATEWAYIP        192.168.0.1
-#define CONFIG_SERVERIP         192.168.0.2
-#define CONFIG_HOSTNAME         STAMP
-#define CONFIG_ROOTPATH                 /checkout/uClinux-dist/romfs
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		STAMP
+#define CONFIG_ROOTPATH		/checkout/uClinux-dist/romfs
 
 /* To remove hardcoding and enable MAC storage in EEPROM  */
-/* #define CONFIG_ETHADDR               02:80:ad:20:31:b8 */
+/* #define CONFIG_ETHADDR		02:80:ad:20:31:b8 */
 #endif /* CONFIG_DRIVER_SMC91111 */
 
 /*
  * Flash settings
- *
  */
 
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
-#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CFG_FLASH_CFI		/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER	/* Use common CFI driver        */
 #define	CFG_FLASH_CFI_AMD_RESET
 
-#define CFG_FLASH_BASE			0x20000000
-#define CFG_MAX_FLASH_BANKS		1		/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT		67		/* max number of sectors on one chip */
+#define CFG_FLASH_BASE		0x20000000
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_ADDR			0x20004000
-#define	CFG_ENV_OFFSET			(CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x20004000
+#define	CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
 #elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#define CFG_ENV_IS_IN_EEPROM		1
-#define CFG_ENV_OFFSET			0x4000
-#define CFG_ENV_HEADER			(CFG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0x4000
+#define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
 #endif
 
-#define	CFG_ENV_SIZE			0x2000
-#define CFG_ENV_SECT_SIZE 		0x2000	/* Total Size of Environment Sector */
+#define	CFG_ENV_SIZE		0x2000
+#define CFG_ENV_SECT_SIZE 	0x2000	/* Total Size of Environment Sector */
 #define	ENV_IS_EMBEDDED
 
-#define CFG_FLASH_ERASE_TOUT		30000	/* Timeout for Chip Erase (in ms) */
+#define CFG_FLASH_ERASE_TOUT	30000	/* Timeout for Chip Erase (in ms) */
 #define CFG_FLASH_ERASEBLOCK_TOUT	5000	/* Timeout for Block Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT		1	/* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms) */
 
 /* JFFS Partition offset set  */
 #define CFG_JFFS2_FIRST_BANK 0
 #define CFG_JFFS2_NUM_BANKS  1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR 		11
+#define CFG_JFFS2_FIRST_SECTOR 	11
 
 /*
  * following timeouts shall be used once the
  * Flash real protection is enabled
  */
-#define CFG_FLASH_LOCK_TOUT		5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT		10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
 
 /*
  * SDRAM settings & memory map
- *
  */
 
-#define CONFIG_MEM_SIZE			128             /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH     	11             /* 8, 9, 10, 11    */
+#define CONFIG_MEM_SIZE		128	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH     11	/* 8, 9, 10, 11    */
 #define CONFIG_MEM_MT48LC64M4A2FB_7E	1
 
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
-#define CFG_MEMTEST_START		0x00000000	/* memtest works on */
+#define CFG_MEMTEST_START	0x00000000	/* memtest works on */
 #elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#define CFG_MEMTEST_START		0x00100000	/* memtest works on */
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #endif
 
-#define	CFG_SDRAM_BASE			0x00000000
+#define	CFG_SDRAM_BASE		0x00000000
 
 #define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 *1024)
 #define CFG_MEMTEST_END		(CFG_MAX_RAM_SIZE - 0x80000 - 1)
 #define CONFIG_LOADADDR		0x01000000
 
-#define CFG_LOAD_ADDR 			CONFIG_LOADADDR
-#define	CFG_MONITOR_LEN			(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN                  (128 << 10)     /* Reserve 128 kB for malloc()  */
-#define CFG_GBL_DATA_SIZE               0x4000		/* Reserve 16k for Global Data  */
-#define CONFIG_STACKSIZE                (128*1024)      /* regular stack */
+#define CFG_LOAD_ADDR 		CONFIG_LOADADDR
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)     /* Reserve 128 kB for malloc()	*/
+#define CFG_GBL_DATA_SIZE	0x4000		/* Reserve 16k for Global Data  */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 
 #define CFG_MONITOR_BASE		(CFG_MAX_RAM_SIZE - 0x40000)
-#define CFG_MALLOC_BASE                 (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_ADDR               (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE                (CFG_GBL_DATA_ADDR  - 4)
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
 
 /* Check to make sure everything fits in SDRAM */
 #if ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) > CFG_MAX_RAM_SIZE)
@@ -201,17 +195,17 @@
 #endif
 
 #if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ			( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
 #else
-#define CONFIG_VCO_HZ			(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
 #endif
 
 #if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ			( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ			( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
 #else
-#define CONFIG_CCLK_HZ			CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ			CONFIG_CLKIN_HZ
+#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
 #endif
 
 #if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
@@ -221,71 +215,71 @@
 #undef CONFIG_SPI_FLASH_FAST_READ
 #endif
 #endif
+
 /*
  * Command settings
- *
  */
 
-#define CFG_LONGHELP                    1
-#define CONFIG_CMDLINE_EDITING          1
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
 
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
-#define CFG_AUTOLOAD                    "no"    /*rarpb, bootp or dhcp commands will perform only a */
+#define CFG_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
 #endif
-                                                /* configuration lookup from the BOOTP/DHCP server, */
-                                                /* but not try to load any image using TFTP         */
 
-#define CONFIG_BOOTDELAY                5
-#define CONFIG_BOOT_RETRY_TIME          -1      /* Enable this if bootretry required, currently its disabled */
+/* configuration lookup from the BOOTP/DHCP server, */
+/* but not try to load any image using TFTP         */
+
+#define CONFIG_BOOTDELAY	5
+#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
-#define CONFIG_BOOTCOMMAND              "run ramboot"
+#define CONFIG_BOOTCOMMAND	"run ramboot"
 #elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
-#define CONFIG_BOOTCOMMAND 		"eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000"
+#define CONFIG_BOOTCOMMAND 	"eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000"
 #endif
 
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
 
 #if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_COMMANDS1                (CONFIG_CMD_DFL | \
-                                         CFG_CMD_PING   | \
-                                         CFG_CMD_ELF    | \
-                                         CFG_CMD_CACHE  | \
-                                         CFG_CMD_JFFS2  | \
-                                         CFG_CMD_EEPROM | \
-                                         CFG_CMD_DATE)
+#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL | \
+				 CFG_CMD_PING   | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_CACHE  | \
+				 CFG_CMD_JFFS2  | \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_DATE)
 
 #else
-#define CONFIG_COMMANDS1                (CONFIG_CMD_DFL | \
-                                         CFG_CMD_ELF    | \
-                                         CFG_CMD_CACHE  | \
-                                         CFG_CMD_JFFS2  | \
-                                         CFG_CMD_EEPROM | \
-                                         CFG_CMD_DATE)
-
+#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_CACHE  | \
+				 CFG_CMD_JFFS2  | \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_DATE)
 #endif
 
 #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT)
 #if (CONFIG_DRIVER_SMC91111)
 #define CONFIG_EXTRA_ENV_SETTINGS \
-        "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
-        "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
-                "$(rootpath) console=ttyBF0,57600\0" \
-        "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
-                "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
-        "ramboot=tftpboot $(loadaddr) linux; " \
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
+		"$(rootpath) console=ttyBF0,57600\0" \
+	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
+		"$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
+	"ramboot=tftpboot $(loadaddr) linux; " \
 		"run ramargs;run addip;bootelf\0" \
-        "nfsboot=tftpboot $(loadaddr) linux; " \
+	"nfsboot=tftpboot $(loadaddr) linux; " \
 		"run nfsargs;run addip;bootelf\0" \
-        "flashboot=bootm 0x20100000\0" \
-        "update=tftpboot $(loadaddr) u-boot.bin; " \
-                "protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \
-                "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
-        ""
+	"flashboot=bootm 0x20100000\0" \
+	"update=tftpboot $(loadaddr) u-boot.bin; " \
+		"protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \
+		"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
+	""
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
-        "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
-        "flashboot=bootm 0x20100000\0" \
-        ""
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+	"flashboot=bootm 0x20100000\0" \
+	"
 #endif
 
 #elif (BFIN_BOOT_MODE == BF533_SPI_BOOT)
@@ -328,40 +322,39 @@
 
 /*
  * Console settings
- *
  */
 
-#define CONFIG_BAUDRATE                 57600
-#define CFG_BAUDRATE_TABLE              { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE		57600
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
 #if (BFIN_CPU == ADSP_BF531)
-#define	CFG_PROMPT		"serial_bf531> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT	"serial_bf531> "	/* Monitor Command Prompt */
 #elif (BFIN_CPU == ADSP_BF532)
-#define	CFG_PROMPT		"serial_bf532> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT	"serial_bf532> "	/* Monitor Command Prompt */
 #else
-#define	CFG_PROMPT		"serial_bf533> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT	"serial_bf533> "	/* Monitor Command Prompt */
 #endif
 #else
 #if (BFIN_CPU == ADSP_BF531)
-#define	CFG_PROMPT		"bf531> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT	"bf531> "	/* Monitor Command Prompt */
 #elif (BFIN_CPU == ADSP_BF532)
-#define	CFG_PROMPT		"bf532> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT	"bf532> "	/* Monitor Command Prompt */
 #else
-#define	CFG_PROMPT		"bf533> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT	"bf533> "	/* Monitor Command Prompt */
 #endif
 #endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE                      1024    /* Console I/O Buffer Size */
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE                      256     /* Console I/O Buffer Size */
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE                      (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)      /* Print Buffer Size */
-#define CFG_MAXARGS                     16      /* max number of command args */
-#define CFG_BARGSIZE                    CFG_CBSIZE      /* Boot Argument Buffer Size */
+#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CONFIG_LOADS_ECHO               1
+#define CONFIG_LOADS_ECHO	1
 
 /*
  * I2C settings
@@ -369,30 +362,30 @@
  */
 #if (CONFIG_SOFT_I2C)
 
-#define I2C_INIT                        (*pFIO_DIR |=  PF_SCL); asm("ssync;")
-#define I2C_ACTIVE                      (*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE                    (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ                        ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
-#define I2C_SDA(bit)                    if(bit) { \
-                                                        *pFIO_FLAG_S = PF_SDA; \
-                                                        asm("ssync;"); \
-                                                } \
-                                        else    { \
-                                                        *pFIO_FLAG_C = PF_SDA; \
-                                                        asm("ssync;"); \
-                                                }
-#define I2C_SCL(bit)                    if(bit) { \
-                                                        *pFIO_FLAG_S = PF_SCL; \
-                                                        asm("ssync;"); \
-                                                } \
-                                        else    { \
-                                                        *pFIO_FLAG_C = PF_SCL; \
-                                                        asm("ssync;"); \
-                                                }
-#define I2C_DELAY                       udelay(5)       /* 1/4 I2C clock duration */
-
-#define CFG_I2C_SPEED                   50000
-#define CFG_I2C_SLAVE                   0xFE
+#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
+#define I2C_SDA(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SDA; \
+				asm("ssync;"); \
+				} \
+			else	{ \
+				*pFIO_FLAG_C = PF_SDA; \
+				asm("ssync;"); \
+				}
+#define I2C_SCL(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SCL; \
+				asm("ssync;"); \
+				} \
+			else	{ \
+				*pFIO_FLAG_C = PF_SCL; \
+				asm("ssync;"); \
+				}
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+
+#define CFG_I2C_SPEED		50000
+#define CFG_I2C_SLAVE		0xFE
 #endif /* CONFIG_SOFT_I2C */
 
 /*
@@ -400,48 +393,48 @@
  */
 
 /* Enabled below option for CF support */
-/* #define CONFIG_STAMP_CF              1 */
+/* #define CONFIG_STAMP_CF	1 */
 
 #if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE)
 
-#define CONFIG_MISC_INIT_R              1
-#define CONFIG_DOS_PARTITION            1
+#define CONFIG_MISC_INIT_R	1
+#define CONFIG_DOS_PARTITION	1
 /*
  * IDE/ATA stuff
  */
-#undef  CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported */
-#undef  CONFIG_IDE_RESET                /* no reset for ide supported */
+#undef  CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef  CONFIG_IDE_LED			/* no led for ide supported */
+#undef  CONFIG_IDE_RESET		/* no reset for ide supported */
 
-#define CFG_IDE_MAXBUS  1               /* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE               (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR               0x20200000
-#define CFG_ATA_IDE0_OFFSET             0x0000
+#define CFG_ATA_BASE_ADDR	0x20200000
+#define CFG_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET             0x0020  /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET              0x0020  /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET              0x0007  /* Offset for alternate registers */
+#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET	0x0007	/* Offset for alternate registers */
 
-#define CFG_ATA_STRIDE                  2
+#define CFG_ATA_STRIDE		2
 #endif
 
 /*
  * Miscellaneous configurable options
  */
 
-#define	CFG_HZ				1000		/* 1ms time tick */
+#define	CFG_HZ			1000	/* 1ms time tick */
 
-#define CFG_BOOTM_LEN			0x4000000	/* Large Image Length, set to 64 Meg */
+#define CFG_BOOTM_LEN		0x4000000/* Large Image Length, set to 64 Meg */
 
-#define CONFIG_SHOW_BOOT_PROGRESS	1	/* Show boot progress on LEDs */
+#define CONFIG_SHOW_BOOT_PROGRESS 1	/* Show boot progress on LEDs */
 
 #define CONFIG_SPI
 
 #ifdef  CONFIG_VIDEO
 #if (CONFIG_VIDEO)
-#define CONFIG_SPLASH_SCREEN		1
-#define CONFIG_SILENT_CONSOLE		1
+#define CONFIG_SPLASH_SCREEN	1
+#define CONFIG_SILENT_CONSOLE	1
 #else
 #undef CONFIG_VIDEO
 #endif
@@ -450,19 +443,19 @@
 /*
  * FLASH organization and environment definitions
  */
-#define	CFG_BOOTMAPSZ			(8 << 20)	/* Initial Memory map for Linux */
+#define	CFG_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */
 
 /* 0xFF, 0xBBC3BBc3, 0x99B39983 */
-/*#define AMGCTLVAL             (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL              (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL |    \
-                                B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
-#define AMBCTL1VAL              (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL |      \
-                                B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
+/*#define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \
+				B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
+#define AMBCTL1VAL   		(B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \
+				B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
 */
-#define AMGCTLVAL               0xFF
-#define AMBCTL0VAL              0xBBC3BBC3
-#define AMBCTL1VAL              0x99B39983
-#define CF_AMBCTL1VAL           0x99B3ffc2
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0xBBC3BBC3
+#define AMBCTL1VAL		0x99B39983
+#define CF_AMBCTL1VAL		0x99B3ffc2
 
 #ifdef CONFIG_VDSP
 #define ET_EXEC_VDSP		0x8
@@ -471,5 +464,4 @@
 #define VDSP_ENTRY_ADDR		0xFFA00000
 #endif
 
-
 #endif