Patch by Juergen Selent, 17 May 2005:

Add support for Funkwerk VoVPN gateway module.

1 files changed, 406 insertions, 0 deletions

diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
new file mode 100644
index 0000000000..05f6f1898b
--- /dev/null
+++ b/include/configs/VoVPN-GW.h
@@ -0,0 +1,406 @@
+/*
+ * (C) Copyright 2004
+ * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+ *
+ * Support for the Elmeg VoVPN Gateway Module
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* define cpu used */
+#define	CONFIG_MPC8272			1
+
+/* define busmode: 8260 */
+#undef	CONFIG_BUSMODE_60x
+
+/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
+#ifdef	CONFIG_CLKIN_66MHz
+#define	CONFIG_8260_CLKIN		66666666	/* in Hz */
+#else
+#define	CONFIG_8260_CLKIN		100000000	/* in Hz */
+#endif
+
+/* call board_early_init_f */
+#define	CONFIG_BOARD_EARLY_INIT_F	1
+
+/* have misc_init_r() function */
+#define CONFIG_MISC_INIT_R		1
+
+/* have reset_phy_r() function */
+#define CONFIG_RESET_PHY_R		1
+
+/* have special reset function */
+#define	CONFIG_HAVE_OWN_RESET		1
+
+/* allow serial and ethaddr to be overwritten */
+#define	CONFIG_ENV_OVERWRITE
+
+/* watchdog disabled */
+#undef	CONFIG_WATCHDOG
+
+/* include support for bzip2 compressed images */
+#undef	CONFIG_BZIP2
+
+/* status led */
+#undef	CONFIG_STATUS_LED		/* XXX jse */
+
+/* vendor parameter protection */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define	CONFIG_CONS_ON_SMC
+#undef	CONFIG_CONS_ON_SCC
+#undef	CONFIG_CONS_NONE
+#define	CONFIG_CONS_INDEX		1
+
+/* serial port default baudrate */
+#define CONFIG_BAUDRATE			115200
+
+/* echo on for serial download	*/
+#define CONFIG_LOADS_ECHO		1
+
+/* don't allow baudrate change	*/
+#undef	CFG_LOADS_BAUD_CHANGE
+
+/* supported baudrates */
+#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef	CONFIG_ETHER_ON_SCC
+#define	CONFIG_ETHER_ON_FCC
+#undef	CONFIG_ETHER_NONE
+
+#ifdef	CONFIG_ETHER_ON_FCC
+
+/* which SCC/FCC channel for ethernet */
+#define	CONFIG_ETHER_INDEX		1
+
+/* Marvell Switch SMI base addr */
+#define CFG_PHY_ADDR			0x10
+
+/* FCC1 RMII REFCLK is CLK10 */
+#define CFG_CMXFCR_VALUE		CMXFCR_TF1CS_CLK10
+#define CFG_CMXFCR_MASK			(CMXFCR_FC1|CMXFCR_TF1CS_MSK)
+
+/* BDs and buffers on 60x bus */
+#define CFG_CPMFCR_RAMTYPE		0
+
+/* Local Protect, Full duplex, Flowcontrol, RMII */
+#define CFG_FCC_PSMR			(FCC_PSMR_LPB|FCC_PSMR_FDE|\
+					 FCC_PSMR_FCE|FCC_PSMR_RMII)
+
+/* bit-bang MII PHY management	*/
+#define CONFIG_BITBANGMII
+
+#define MDIO_PORT			1		/* Port B */
+#define CFG_MDIO_PIN			0x00002000	/* PB18 */
+#define CFG_MDC_PIN			0x00001000	/* PB19 */
+#define MDIO_ACTIVE			(iop->pdir |=  CFG_MDIO_PIN)
+#define MDIO_TRISTATE			(iop->pdir &= ~CFG_MDIO_PIN)
+#define MDIO_READ			((iop->pdat &  CFG_MDIO_PIN) != 0)
+#define MDIO(bit)			if(bit) iop->pdat |=  CFG_MDIO_PIN; \
+					else	iop->pdat &= ~CFG_MDIO_PIN
+#define MDC(bit)			if(bit) iop->pdat |=  CFG_MDC_PIN; \
+					else	iop->pdat &= ~CFG_MDC_PIN
+#define MIIDELAY			udelay(1)
+
+#endif
+
+/* configure commands */
+#define CONFIG_COMMANDS		(	CFG_CMD_AUTOSCRIPT	| \
+					CFG_CMD_BDI		| \
+					CFG_CMD_CONSOLE		| \
+					CFG_CMD_ECHO		| \
+					CFG_CMD_ENV		| \
+					CFG_CMD_FLASH		| \
+					CFG_CMD_IMI		| \
+					CFG_CMD_IMLS		| \
+					CFG_CMD_LOADB		| \
+					CFG_CMD_MEMORY		| \
+					CFG_CMD_MISC		| \
+					CFG_CMD_NET		| \
+					CFG_CMD_PING		| \
+					CFG_CMD_RUN	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * boot options & environment
+ */
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_BOOTCOMMAND		"run flash_self"
+#undef  CONFIG_BOOTARGS
+#define	CONFIG_EXTRA_ENV_SETTINGS	\
+"clean_nv=erase fff20000 ffffffff\0" \
+"update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 $(filesize); tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 $(filesize)\0" \
+"update_lx=tftp 100000 $(kernel); erase $(kernel_addr) ffefffff; cp.b 100000 $(kernel_addr) $(filesize)\0" \
+"update_fs=tftp 100000 $(fs).$(fstype); erase ff840000 ffdfffff; cp.b 100000 ff840000 $(filesize)\0" \
+"update_ub=tftp 100000 $(uboot); protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 $(filesize); protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \
+"flashargs=setenv bootargs root=$(rootdev) rw rootfstype=$(fstype)\0" \
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \
+"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off\0" \
+"addmisc=setenv bootargs $(bootargs) console=$(console),$(baudrate) ethaddr=$(ethaddr) panic=1\0" \
+"net_nfs=tftpboot 400000 $(kernel); run nfsargs addip addmisc; bootm\0" \
+"net_self=tftpboot 400000 $(kernel); run flashargs addmisc; bootm\0" \
+"flash_self=run flashargs addmisc; bootm $(kernel_addr)\0" \
+"flash_nfs=run nfsargs addip addmisc; bootm $(kernel_addr)\0" \
+"fstype=cramfs\0" \
+"rootpath=/root_fs\0" \
+"uboot=PPC/u-boot.bin\0" \
+"kernel=PPC/uImage\0" \
+"kernel_addr=ffe00000\0" \
+"fs=PPC/root_fs\0" \
+"console=ttyS0\0" \
+"netdev=eth0\0" \
+"rootdev=31:3\0" \
+"ethaddr=00:09:4f:01:02:03\0" \
+"ipaddr=10.0.0.201\0" \
+"netmask=255.255.255.0\0" \
+"serverip=10.0.0.136\0" \
+"gatewayip=10.0.0.10\0" \
+"hostname=bastard\0" \
+""
+
+
+/*
+ * miscellaneous configurable options
+ */
+
+/* undef to save memory */
+#define	CFG_LONGHELP
+
+/* monitor command prompt */
+#define	CFG_PROMPT			"=> "
+
+/* console i/o buffer size */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE			1024
+#else
+#define	CFG_CBSIZE			256
+#endif
+
+/* print buffer size */
+#define	CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+/* max number of command args */
+#define	CFG_MAXARGS			16
+
+/* boot argument buffer size */
+#define CFG_BARGSIZE			CFG_CBSIZE
+
+/* memtest works on */
+#define CFG_MEMTEST_START		0x00100000
+/* 1 ... 15 MB in DRAM */
+#define CFG_MEMTEST_END			0x00f00000
+/* full featured memtest */
+#define CFG_ALT_MEMTEST
+
+/* default load address */
+#define	CFG_LOAD_ADDR			0x00100000
+
+/* decrementer freq: 1 ms ticks	*/
+#define	CFG_HZ				1000
+
+/* configure flash */
+#define CFG_FLASH_BASE			0xff800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		64
+#define CFG_FLASH_SIZE			8
+#undef	CFG_FLASH_16BIT
+#define CFG_FLASH_ERASE_TOUT		240000
+#define CFG_FLASH_WRITE_TOUT		500
+#define CFG_FLASH_LOCK_TOUT		500
+#define CFG_FLASH_UNLOCK_TOUT		10000
+#define CFG_FLASH_PROTECTION
+
+/* monitor in flash */
+#define CFG_MONITOR_OFFSET		0x00700000
+
+/* environment in flash */
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + 0x00020000)
+#define CFG_ENV_SIZE			0x00020000
+#define CFG_ENV_SECT_SIZE		0x00020000
+
+/*
+ * Initial memory map for linux
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ			(8 << 20)   
+
+/* hard reset configuration words */
+#ifdef	CONFIG_CLKIN_66MHz
+#define CFG_HRCW_MASTER			0x04643050
+#else
+#error NO HRCW FOR 100MHZ SPECIFIED !!!
+#endif
+#define CFG_HRCW_SLAVE1			0x00000000
+#define CFG_HRCW_SLAVE2			0x00000000
+#define CFG_HRCW_SLAVE3			0x00000000
+#define CFG_HRCW_SLAVE4			0x00000000
+#define CFG_HRCW_SLAVE5			0x00000000
+#define CFG_HRCW_SLAVE6			0x00000000
+#define CFG_HRCW_SLAVE7			0x00000000
+
+/* internal memory mapped register */
+#define CFG_IMMR			0xF0000000
+
+/* definitions for initial stack pointer and data area (in DPRAM) */
+#define CFG_INIT_RAM_ADDR		CFG_IMMR
+#define CFG_INIT_RAM_END		0x2000
+#define CFG_GBL_DATA_SIZE		128
+#define CFG_GBL_DATA_OFFSET		(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET		CFG_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE			0x00000000
+#define CFG_SDRAM_SIZE			(32*1024*1024)
+#define CFG_MONITOR_BASE		TEXT_BASE
+#define CFG_MONITOR_FLASH		(CFG_FLASH_BASE + CFG_MONITOR_OFFSET)
+#define CFG_MONITOR_LEN			0x00020000
+#define CFG_MALLOC_LEN			0x00020000
+
+/* boot flags */
+#define BOOTFLAG_COLD			0x01	/* normal power-on */
+#define BOOTFLAG_WARM			0x02	/* software reboot */
+
+/* cache configuration */
+#define CFG_CACHELINE_SIZE		32      /* for MPC8260 */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT		5	/* log base 2 of above */
+#endif
+
+/*
+ * HIDx - Hardware Implementation-dependent Registers
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT			(HID0_ICE|HID0_DCE|\
+					 HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
+#define CFG_HID0_FINAL			(HID0_IFEM|HID0_ABE)
+#define CFG_HID2			0
+
+/* RMR - reset mode register - turn on checkstop reset enable */
+#define CFG_RMR				RMR_CSRE
+
+/* BCR - bus configuration */
+#define CFG_BCR				0x00000000
+
+/* SIUMCR - siu module configuration */
+#define CFG_SIUMCR			0x4905c000
+
+/* SYPCR - system protection control */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR			0xffffff87
+#else
+#define CFG_SYPCR			0xffffff83
+#endif
+
+/* TMCNTSC - time counter status and control */
+/* clear interrupts XXX jse */
+//#define CFG_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR)
+#define CFG_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR|\
+					 TMCNTSC_TCF|TMCNTSC_TCE)
+
+/* PISCR - periodic interrupt status and control */
+/* clear interrupts XXX jse */
+//#define CFG_PISCR			(PISCR_PS)
+#define CFG_PISCR			(PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/* SCCR - system clock control */
+#define CFG_SCCR			0x000001a9
+
+/* RCCR - risc controller configuration */
+#define CFG_RCCR			0
+
+/*
+ * MEMORY MAP
+ * ----------
+ * CS0 - FLASH    8MB/8Bit 	base=0xff800000 (boot: 0xfe000000, 8x mirrored)
+ * CS1 - SDRAM   32MB/64Bit	base=0x00000000
+ * CS2 - DSP/SL1  1MB/16Bit	base=0xf0100000
+ * CS3 - DSP/SL2  1MB/16Bit	base=0xf0200000
+ * CS4 - DSP/SL3  1MB/16Bit	base=0xf0300000
+ * CS5 - DSP/SL4  1MB/16Bit	base=0xf0400000
+ * CS7 - DPRAM    1KB/8Bit	base=0xf0500000, size=32KB (32x mirrored)
+ *  x  - IMMR     384KB		base=0xf0000000
+ */
+/* XXX jse 100MHz TODO */
+#define CFG_BR0_PRELIM			0xff800801
+#define CFG_OR0_PRELIM			0xff801e44
+#define CFG_BR1_PRELIM			0x00000041
+#define CFG_OR1_PRELIM			0xfe002ec0
+#if 1
+#define CFG_BR2_PRELIM			0xf0101001
+#define CFG_OR2_PRELIM			0xfff00ef4
+#define CFG_BR3_PRELIM			0xf0201001
+#define CFG_OR3_PRELIM			0xfff00ef4
+#define CFG_BR4_PRELIM			0xf0301001
+#define CFG_OR4_PRELIM			0xfff00ef4
+#define CFG_BR5_PRELIM			0xf0401001
+#define CFG_OR5_PRELIM			0xfff00ef4
+#else
+#define CFG_BR2_PRELIM			0xf0101081
+#define CFG_OR2_PRELIM			0xfff00104
+#define CFG_BR3_PRELIM			0xf0201081
+#define CFG_OR3_PRELIM			0xfff00104
+#define CFG_BR4_PRELIM			0xf0301081
+#define CFG_OR4_PRELIM			0xfff00104
+#define CFG_BR5_PRELIM			0xf0401081
+#define CFG_OR5_PRELIM			0xfff00104
+#endif
+#define CFG_BR7_PRELIM			0xf0500881
+#define CFG_OR7_PRELIM			0xffff8104
+#define CFG_MPTPR			0x2700
+#define CFG_PSDMR			0x822a2452	/* optimal */
+//#define CFG_PSDMR			0x822a48a3	/* relaxed */
+#define CFG_PSRT			0x1a
+
+/* "bad" address */
+#define	CFG_RESET_ADDRESS		0x40000000
+
+#endif	/* __CONFIG_H */