ppc: Remove PCIPPC2 and PCIPPC6 boards

These boards seem to be unmaintained for quite some time. So lets
remove support for them completely. This also cleans up some
common drivers/files.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch>
Acked-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 251 deletions

diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
deleted file mode 100644
index 90cee881ae..0000000000
--- a/include/configs/PCIPPC2.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the PCIPPC-2 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_PCIPPC2		1	/* this is a PCIPPC2 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R	1
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_PREBOOT		""
-#define CONFIG_BOOTDELAY	5
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SNTP
-
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-
-#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define	CONFIG_SYS_MAXARGS	64		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000
-#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
-#define CONFIG_SYS_FLASH_MAX_SIZE  0x00100000
-/* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x20000000  /* 512Mb			*/
-
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
-    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE      0x8000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-/*
- * Temporary buffer for serial data until the real serial driver
- * is initialised (memtest will destroy this buffer)
- */
-#define CONFIG_SYS_SCONSOLE_ADDR     CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_SCONSOLE_SIZE     0x0002000
-
-/* SDRAM 0 - 256MB
- */
-#define CONFIG_SYS_DBAT0L	      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U	      (CONFIG_SYS_SDRAM_BASE | \
-			       BATU_BL_256M | BATU_VS | BATU_VP)
-/* SDRAM 1 - 256MB
- */
-#define CONFIG_SYS_DBAT1L	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
-			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT1U	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
-			       BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Init RAM in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT2L	      (CONFIG_SYS_INIT_RAM_ADDR | \
-			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT2U	      (CONFIG_SYS_INIT_RAM_ADDR | \
-			       BATU_BL_128K | BATU_VS | BATU_VP)
-
-/* I/O and PCI memory at 0xf0000000
- */
-#define CONFIG_SYS_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT0L	      CONFIG_SYS_DBAT0L
-#define CONFIG_SYS_IBAT0U	      CONFIG_SYS_DBAT0U
-#define CONFIG_SYS_IBAT1L	      CONFIG_SYS_DBAT1L
-#define CONFIG_SYS_IBAT1U	      CONFIG_SYS_DBAT1U
-#define CONFIG_SYS_IBAT2L	      CONFIG_SYS_DBAT2L
-#define CONFIG_SYS_IBAT2U	      CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_IBAT3L	      CONFIG_SYS_DBAT3L
-#define CONFIG_SYS_IBAT3U	      CONFIG_SYS_DBAT3U
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the PCIPPC2 user's manual.
- */
-#define CONFIG_SYS_HZ		      1000
-#define CONFIG_SYS_BUS_CLK            100000000 /* bus speed - 100 mhz          */
-#define CONFIG_SYS_CPU_CLK	      300000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	      (8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
-
-/*
- * Note: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE		0x1000	/* Size of the Environment		*/
-#define CONFIG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*
- * L2 cache
- */
-#undef CONFIG_SYS_L2
-#define L2_INIT   (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-/*-----------------------------------------------------------------------
-  RTC m48t59
-*/
-#define CONFIG_RTC_MK48T59
-
-#define CONFIG_WATCHDOG
-
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
-#define CONFIG_TULIP
-
-#endif	/* __CONFIG_H */