* Patch by Stephan Linz, 09 Mar 2004

  - Add support for the SSV ADNP/ESC1 (Nios Softcore)

* Patch by George G. Davis, 9 Mar 2004:
  fix recent build failure for SA1100 target

* Patch by Travis Sawyer, 09 Mar 2004:
  Support native interrupt mode for the IBM440GX.
  Previously it was running in 440GP compatibility mode.

1 files changed, 677 insertions, 0 deletions

diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
new file mode 100644
index 0000000000..e2dc343273
--- /dev/null
+++ b/include/configs/ADNPESC1.h
@@ -0,0 +1,677 @@
+/*
+ * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/***********************************************************************
+ * Include the whole NIOS CPU configuration.
+ *
+ * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
+ *
+ ***********************************************************************/
+
+#if	defined(CONFIG_NIOS_BASE_32)
+#include <configs/ADNPESC1_base_32.h>
+#else
+#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#endif
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU -- TOP-LEVEL
+ *----------------------------------------------------------------------*/
+#define CONFIG_NIOS		1		/* NIOS-32 core		*/
+#define	CONFIG_ADNPESC1		1		/* SSV ADNP/ESC1 board	*/
+#define CONFIG_SYS_CLK_FREQ	CFG_NIOS_CPU_CLK/* 50 MHz core clock	*/
+#define	CFG_HZ			1000		/* 1 msec time tick	*/
+#undef  CFG_CLKS_IN_HZ
+#define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_SDRAM_SIZE != 0)
+
+#define CFG_SDRAM_BASE		CFG_NIOS_CPU_SDRAM_BASE
+#define CFG_SDRAM_SIZE		CFG_NIOS_CPU_SDRAM_SIZE
+
+#else
+#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#endif
+
+#if	defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
+
+#define	CFG_SRAM_BASE		CFG_NIOS_CPU_SRAM_BASE
+#define	CFG_SRAM_SIZE		CFG_NIOS_CPU_SRAM_SIZE
+
+#else
+
+#undef	CFG_SRAM_BASE
+#undef	CFG_SRAM_SIZE
+
+#endif
+
+#define CFG_VECT_BASE		CFG_NIOS_CPU_VEC_BASE
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION - For the most part, you can put things pretty
+ * much anywhere. This is pretty flexible for Nios. So here we make some
+ * arbitrary choices & assume that the monitor is placed at the end of
+ * a memory resource (so you must make sure TEXT_BASE is chosen
+ * appropriately -- this is very important if you plan to move your
+ * memory to another place as configured at this time !!!).
+ *
+ * 	-The heap is placed below the monitor.
+ * 	-Global data is placed below the heap.
+ * 	-The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+
+#define CFG_FLASH_BASE		CFG_NIOS_CPU_FLASH_BASE
+#define CFG_FLASH_SIZE		CFG_NIOS_CPU_FLASH_SIZE
+#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size	*/
+
+#else
+#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#endif
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+
+#define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+
+/* Mem addr of environment */
+#if	defined(CONFIG_NIOS_BASE_32)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#else
+#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
+#endif
+
+#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
+
+#else
+#define	CFG_ENV_IS_NOWHERE	1		/* NO Environment	*/
+#endif
+
+/*------------------------------------------------------------------------
+ * NIOS APPLICATION CODE BASE AREA
+ *----------------------------------------------------------------------*/
+#if	((CFG_ENV_ADDR + CFG_ENV_SIZE) == 0x1050000)
+#define	CFG_ADNPESC1_UPDATE_LOAD_ADDR	"0x2000100"
+#define CFG_ADNPESC1_NIOS_APPL_ENTRY	"0x1050000"
+#define CFG_ADNPESC1_NIOS_APPL_IDENT	"0x105000c"
+#define	CFG_ADNPESC1_NIOS_APPL_END	"0x11fffff"
+#define CFG_ADNPESC1_FILESYSTEM_BASE	"0x1200000"
+#define	CFG_ADNPESC1_FILESYSTEM_END	"0x17fffff"
+#else
+#error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h
+#endif
+#define CFG_ADNPESC1_NIOS_IDENTIFIER	"Nios"
+
+/*------------------------------------------------------------------------
+ * BOOT ENVIRONMENT
+ *----------------------------------------------------------------------*/
+#ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
+#define	CFG_ADNPESC1_SLED_BOOT_OFF	"sled boot off; "
+#define	CFG_ADNPESC1_SLED_RED_BLINK	"sled red blink; "
+#else
+#define	CFG_ADNPESC1_SLED_BOOT_OFF
+#define	CFG_ADNPESC1_SLED_RED_BLINK
+#endif
+
+#define	CONFIG_BOOTDELAY	5
+#define	CONFIG_BOOTCOMMAND						\
+	"if itest.s *$appl_ident_addr == \"$appl_ident_str\"; "		\
+	"then "								\
+		"wd off; "						\
+		CFG_ADNPESC1_SLED_BOOT_OFF				\
+		"go $appl_entry_addr; "					\
+	"else "								\
+		CFG_ADNPESC1_SLED_RED_BLINK				\
+		"echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
+		"echo *** invalid application at $appl_entry_addr; "	\
+		"echo *** stop bootup...; "				\
+	"fi"
+
+/*------------------------------------------------------------------------
+ * EXTRA ENVIRONMENT
+ *----------------------------------------------------------------------*/
+#ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
+#define	CFG_ADNPESC1_SLED_YELLO_ON	"sled yellow on; "
+#define	CFG_ADNPESC1_SLED_YELLO_OFF	"sled yellow off; "
+#else
+#define	CFG_ADNPESC1_SLED_YELLO_ON
+#define	CFG_ADNPESC1_SLED_YELLO_OFF
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"update_allowed=0\0"						\
+	"update_load_addr="	CFG_ADNPESC1_UPDATE_LOAD_ADDR	"\0"	\
+	"appl_entry_addr="	CFG_ADNPESC1_NIOS_APPL_ENTRY	"\0"	\
+	"appl_end_addr="	CFG_ADNPESC1_NIOS_APPL_END	"\0"	\
+	"appl_ident_addr="	CFG_ADNPESC1_NIOS_APPL_IDENT	"\0"	\
+	"appl_ident_str="	CFG_ADNPESC1_NIOS_IDENTIFIER	"\0"	\
+	"appl_name=ADNPESC1/base32/linux.bin\0"				\
+	"appl_update="							\
+		"if itest.b $update_allowed != 0; "			\
+		"then "							\
+			CFG_ADNPESC1_SLED_YELLO_ON			\
+			"tftp $update_load_addr $appl_name; "		\
+			"protect off $appl_entry_addr $appl_end_addr; "	\
+			"era $appl_entry_addr $appl_end_addr; "		\
+			"cp.b $update_load_addr $appl_entry_addr $filesize; "\
+			CFG_ADNPESC1_SLED_YELLO_OFF			\
+		"else "							\
+			"echo *** update not allowed (update_allowed=$update_allowed); "\
+		"fi\0"							\
+	"fs_base_addr="		CFG_ADNPESC1_FILESYSTEM_BASE	"\0"	\
+	"fs_end_addr="		CFG_ADNPESC1_FILESYSTEM_END	"\0"	\
+	"fs_name=ADNPESC1/base32/romfs.img\0"				\
+	"fs_update="							\
+		"if itest.b $update_allowed != 0; "			\
+		"then "							\
+			CFG_ADNPESC1_SLED_YELLO_ON			\
+			"tftp $update_load_addr $fs_name; "		\
+			"protect off $fs_base_addr $fs_end_addr; "	\
+			"era $fs_base_addr $fs_end_addr; "		\
+			"cp.b $update_load_addr $fs_base_addr $filesize; "\
+			CFG_ADNPESC1_SLED_YELLO_OFF			\
+		"else "							\
+			"echo *** update not allowed (update_allowed=$update_allowed); "\
+		"fi\0"							\
+	"uboot_name=ADNPESC1/base32/u-boot.bin\0"			\
+	"uboot_loadnrun="						\
+		"if ping $serverip; "					\
+		"then "							\
+			CFG_ADNPESC1_SLED_YELLO_ON			\
+			"tftp $update_load_addr $uboot_name; "		\
+			"wd off; "					\
+			"go $update_load_addr; "			\
+		"else "							\
+			"echo *** missing connection to $serverip; "	\
+			"echo *** check your network and try again...; "\
+		"fi\0"
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_UART_NUMS != 0)
+
+#define CFG_NIOS_CONSOLE	CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+
+#if	(CFG_NIOS_CPU_UART0_BR != 0)
+#define CFG_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		CFG_NIOS_CPU_UART0_BR
+#else
+#undef	CFG_NIOS_FIXEDBAUD
+#define CONFIG_BAUDRATE		115200
+#endif
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#else
+#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#endif
+
+/*------------------------------------------------------------------------
+ * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
+ * so an avalon bus timer is required.
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
+
+#if	(CFG_NIOS_CPU_TICK_TIMER == 0)
+
+#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
+#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER0_IRQ
+
+#if	(CFG_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
+
+#if	(CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+
+#elif	(CFG_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
+
+#if	(CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#endif
+
+#elif	(CFG_NIOS_CPU_TICK_TIMER == 1)
+
+#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
+#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER1_IRQ
+
+#if	(CFG_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
+
+#if	(CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+
+#elif	(CFG_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
+
+#if	(CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
+#endif
+
+#endif	/* CFG_NIOS_CPU_TICK_TIMER */
+
+#else
+#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#endif
+
+/*------------------------------------------------------------------------
+ * WATCHDOG (or better MAX823 supervisory circuite access)
+ *----------------------------------------------------------------------*/
+#define	CONFIG_HW_WATCHDOG	1		/* board specific WD	*/
+
+#ifdef	CONFIG_HW_WATCHDOG
+
+/* MAX823 supervisor -- watchdog enable port at: */
+#if	(CFG_NIOS_CPU_WDENA_PIO == 0)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO0	/* PIO0		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 1)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO1	/* PIO1		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 2)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO2	/* PIO2		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 3)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO3	/* PIO3		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 4)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO4	/* PIO4		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 5)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO5	/* PIO5		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 6)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO6	/* PIO6		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 7)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO7	/* PIO7		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 8)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO8	/* PIO8		*/
+#elif	(CFG_NIOS_CPU_WDENA_PIO == 9)
+#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO9	/* PIO9		*/
+#else
+#error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
+#endif
+
+/* MAX823 supervisor -- watchdog trigger port at: */
+#if	(CFG_NIOS_CPU_WDTOG_PIO == 0)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO0	/* PIO0		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 1)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO1	/* PIO1		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 2)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO2	/* PIO2		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 3)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO3	/* PIO3		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 4)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO4	/* PIO4		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 5)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO5	/* PIO5		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 6)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO6	/* PIO6		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 7)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO7	/* PIO7		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 8)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO8	/* PIO8		*/
+#elif	(CFG_NIOS_CPU_WDTOG_PIO == 9)
+#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO9	/* PIO9		*/
+#else
+#error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
+#endif
+
+#if	defined(CONFIG_NIOS_BASE_32)		/* NIOS CPU specifics	*/
+#define	CONFIG_HW_WDENA_BIT		0	/* WD enable  @ Bit 0	*/
+#define	CONFIG_HW_WDTOG_BIT		0	/* WD trigger @ Bit 0	*/
+#define	CONFIG_HW_WDPORT_WRONLY	1	/* each WD port wr/only*/
+#else
+#error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h
+#endif
+
+#endif	/* CONFIG_HW_WATCHDOG */
+
+/*------------------------------------------------------------------------
+ * SERIAL PERIPHAREL INTERFACE
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_SPI_NUMS == 1)
+
+#define	CONFIG_NIOS_SPI		1		/* SPI support active	*/
+#define	CFG_NIOS_SPIBASE	CFG_NIOS_CPU_SPI0
+#define	CFG_NIOS_SPIBITS	CFG_NIOS_CPU_SPI0_BITS
+
+#define	CONFIG_RTC_DS1306	1	/* Dallas 1306 real time clock	*/
+#define CFG_SPI_RTC_DEVID	0	/*        as 1st SPI device	*/
+
+#define	__SPI_CMD_OFF		0	/* allow default commands:	*/
+					/*	CFG_CMD_SPI		*/
+					/*	CFG_CMD_DATE		*/
+
+#else
+#undef	CONFIG_NIOS_SPI				/* NO SPI support	*/
+#define	__SPI_CMD_OFF	(	CFG_CMD_SPI	\
+			|	CFG_CMD_DATE	\
+			)
+#endif
+
+/*------------------------------------------------------------------------
+ * Ethernet -- needs work!
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_LAN_NUMS == 1)
+
+#if	(CFG_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
+
+#define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
+#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
+#define	CONFIG_SMC91111_BASE	(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+
+#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#define	CONFIG_SMC_USE_32_BIT	1
+#else	/* no */
+#undef	CONFIG_SMC_USE_32_BIT
+#endif
+
+#elif	(CFG_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
+
+	/********************************************/
+	/* !!! CS8900 is __not__ tested on NIOS !!! */
+	/********************************************/
+#define	CONFIG_DRIVER_CS8900			/* Using CS8900		*/
+#define	CS8900_BASE		(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+
+#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#undef	CS8900_BUS16
+#define	CS8900_BUS32		1
+#else	/* no */
+#define	CS8900_BUS16		1
+#undef	CS8900_BUS32
+#endif
+
+#else
+#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#endif
+
+#define CONFIG_ETHADDR		02:80:ae:20:60:6f
+#define CONFIG_NETMASK		255.255.255.248
+#define CONFIG_IPADDR		192.168.161.84
+#define CONFIG_SERVERIP		192.168.161.85
+
+#else
+#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#endif
+
+/*------------------------------------------------------------------------
+ * STATUS LEDs
+ *----------------------------------------------------------------------*/
+#if	(CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
+
+#if	(CFG_NIOS_CPU_LED_PIO == 0)
+
+#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO0
+#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO0_BITS
+#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
+
+#if	(CFG_NIOS_CPU_PIO0_TYPE == 1)
+#define	STATUS_LED_WRONLY		1
+#else
+#undef	STATUS_LED_WRONLY
+#endif
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 1)
+
+#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO1
+#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO1_BITS
+#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
+
+#if	(CFG_NIOS_CPU_PIO1_TYPE == 1)
+#define	STATUS_LED_WRONLY		1
+#else
+#undef	STATUS_LED_WRONLY
+#endif
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 2)
+
+#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO2
+#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO2_BITS
+#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
+
+#if	(CFG_NIOS_CPU_PIO2_TYPE == 1)
+#define	STATUS_LED_WRONLY		1
+#else
+#undef	STATUS_LED_WRONLY
+#endif
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 3)
+
+#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 4)
+
+#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 5)
+
+#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 6)
+
+#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 7)
+
+#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 8)
+
+#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+
+#elif	(CFG_NIOS_CPU_LED_PIO == 9)
+
+#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+
+#else
+#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#endif
+
+#define	CONFIG_STATUS_LED		1 /* enable status led driver */
+
+#define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
+#define	STATUS_LED_STATE		STATUS_LED_BLINKING
+#define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
+#define	STATUS_LED_PERIOD		(CFG_HZ / 2)	/* ca. 1 Hz */
+#define	STATUS_LED_BOOT			0		/* boot LED */
+
+#if	(STATUS_LED_BITS > 1)
+#define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
+#define	STATUS_LED_STATE1		STATUS_LED_OFF
+#define	STATUS_LED_PERIOD1		(CFG_HZ / 10)	/* ca. 5 Hz */
+#define	STATUS_LED_RED			1		/* fail LED */
+#endif
+
+#if	(STATUS_LED_BITS > 2)
+#define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
+#define	STATUS_LED_STATE2		STATUS_LED_OFF
+#define	STATUS_LED_PERIOD2		(CFG_HZ / 2)	/* ca. 1 Hz */
+#define	STATUS_LED_YELLOW		2		/* info LED */
+#endif
+
+#if	(STATUS_LED_BITS > 3)
+#define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
+#define	STATUS_LED_STATE3		STATUS_LED_OFF
+#define	STATUS_LED_PERIOD3		(CFG_HZ / 2)	/* ca. 1 Hz */
+#define	STATUS_LED_GREEN		3		/* info LED */
+#endif
+
+#define	STATUS_LED_PAR			1 /* makes status_led.h happy */
+
+#endif	/* CFG_NIOS_CPU_PIO_NUMS */
+
+/*------------------------------------------------------------------------
+ * Diagnostics / Power On Self Tests
+ *----------------------------------------------------------------------*/
+#define	CONFIG_POST			CFG_POST_RTC
+#define	CFG_NIOS_POST_WORD_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_CMD_ASKENV | \
+				 CFG_CMD_BEDBUG | \
+				 CFG_CMD_BMP	| \
+				 CFG_CMD_CACHE	| \
+				 CFG_CMD_DOC	| \
+				 CFG_CMD_DTT	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_FAT	| \
+				 CFG_CMD_FDC	| \
+				 CFG_CMD_FDOS	| \
+				 CFG_CMD_HWFLOW	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_KGDB	| \
+				 CFG_CMD_NAND	| \
+				 CFG_CMD_NFS	| \
+				 CFG_CMD_MMC	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_PCI	| \
+				 CFG_CMD_PCMCIA | \
+				 CFG_CMD_SCSI	| \
+				 CFG_CMD_VFD	| \
+				 CFG_CMD_USB	| \
+				 __SPI_CMD_OFF	) )
+
+
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * KGDB
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	9600
+#endif
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define	CFG_LONGHELP			    /* undef to save memory	*/
+#define	CFG_HUSH_PARSER		1	    /* use "hush" command parser
+					       undef to save memory	*/
+#define	CFG_PROMPT		"ADNPESC1 > " /* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		64	    /* max number of command args*/
+#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"[]> "
+#endif
+
+/* Default load address	*/
+#if	(CFG_SRAM_SIZE != 0)
+
+/* default in SRAM */
+#define	CFG_LOAD_ADDR		CFG_SRAM_BASE
+
+#elif	(CFG_SDRAM_SIZE != 0)
+
+/* default in SDRAM */
+#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#if 1
+#define	CFG_LOAD_ADDR		(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#else
+#define	CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 0x400000)
+#endif
+#else
+#define	CFG_LOAD_ADDR		CFG_SDRAM_BASE
+#endif
+
+#else
+#undef	CFG_LOAD_ADDR		/* force error break */
+#endif
+
+
+/* MEM test area */
+#if	(CFG_SDRAM_SIZE != 0)
+
+/* SDRAM begin to stack area (1MB stack) */
+#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#if 0
+#define	CFG_MEMTEST_START	(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#else
+#define	CFG_MEMTEST_START	(CFG_SDRAM_BASE + 0x400000)
+#endif
+#else
+#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
+#endif
+
+#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+
+#else
+#undef	CFG_MEMTEST_START	/* force error break */
+#undef	CFG_MEMTEST_END
+#endif
+
+
+#endif	/* __CONFIG_H */