miiphybb: move to drivers/net/phy

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 281 insertions, 0 deletions

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
new file mode 100644
index 0000000000..10dc082069
--- /dev/null
+++ b/drivers/net/phy/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libphy.a
+
+COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c
new file mode 100644
index 0000000000..6446012f95
--- /dev/null
+++ b/drivers/net/phy/miiphybb.c
@@ -0,0 +1,235 @@
+/*
+ * (C) Copyright 2001
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This provides a bit-banged interface to the ethernet MII management
+ * channel.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <ppc_asm.tmpl>
+
+/*****************************************************************************
+ *
+ * Utility to send the preamble, address, and register (common to read
+ * and write).
+ */
+static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
+{
+	int j;			/* counter */
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+#endif
+
+	/*
+	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+	 * The IEEE spec says this is a PHY optional requirement.  The AMD
+	 * 79C874 requires one after power up and one after a MII communications
+	 * error.  This means that we are doing more preambles than we need,
+	 * but it is safer and will be much more robust.
+	 */
+
+	MDIO_ACTIVE;
+	MDIO (1);
+	for (j = 0; j < 32; j++) {
+		MDC (0);
+		MIIDELAY;
+		MDC (1);
+		MIIDELAY;
+	}
+
+	/* send the start bit (01) and the read opcode (10) or write (10) */
+	MDC (0);
+	MDIO (0);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+	MDC (0);
+	MDIO (1);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+	MDC (0);
+	MDIO (read);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+	MDC (0);
+	MDIO (!read);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+
+	/* send the PHY address */
+	for (j = 0; j < 5; j++) {
+		MDC (0);
+		if ((addr & 0x10) == 0) {
+			MDIO (0);
+		} else {
+			MDIO (1);
+		}
+		MIIDELAY;
+		MDC (1);
+		MIIDELAY;
+		addr <<= 1;
+	}
+
+	/* send the register address */
+	for (j = 0; j < 5; j++) {
+		MDC (0);
+		if ((reg & 0x10) == 0) {
+			MDIO (0);
+		} else {
+			MDIO (1);
+		}
+		MIIDELAY;
+		MDC (1);
+		MIIDELAY;
+		reg <<= 1;
+	}
+}
+
+
+/*****************************************************************************
+ *
+ * Read a MII PHY register.
+ *
+ * Returns:
+ *   0 on success
+ */
+int bb_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
+{
+	short rdreg;		/* register working value */
+	int j;			/* counter */
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+#endif
+
+	miiphy_pre (1, addr, reg);
+
+	/* tri-state our MDIO I/O pin so we can read */
+	MDC (0);
+	MDIO_TRISTATE;
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+
+	/* check the turnaround bit: the PHY should be driving it to zero */
+	if (MDIO_READ != 0) {
+		/* puts ("PHY didn't drive TA low\n"); */
+		for (j = 0; j < 32; j++) {
+			MDC (0);
+			MIIDELAY;
+			MDC (1);
+			MIIDELAY;
+		}
+		return (-1);
+	}
+
+	MDC (0);
+	MIIDELAY;
+
+	/* read 16 bits of register data, MSB first */
+	rdreg = 0;
+	for (j = 0; j < 16; j++) {
+		MDC (1);
+		MIIDELAY;
+		rdreg <<= 1;
+		rdreg |= MDIO_READ;
+		MDC (0);
+		MIIDELAY;
+	}
+
+	MDC (1);
+	MIIDELAY;
+	MDC (0);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+
+	*value = rdreg;
+
+#ifdef DEBUG
+	printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
+#endif
+
+	return 0;
+}
+
+
+/*****************************************************************************
+ *
+ * Write a MII PHY register.
+ *
+ * Returns:
+ *   0 on success
+ */
+int bb_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
+{
+	int j;			/* counter */
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+#endif
+
+	miiphy_pre (0, addr, reg);
+
+	/* send the turnaround (10) */
+	MDC (0);
+	MDIO (1);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+	MDC (0);
+	MDIO (0);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+
+	/* write 16 bits of register data, MSB first */
+	for (j = 0; j < 16; j++) {
+		MDC (0);
+		if ((value & 0x00008000) == 0) {
+			MDIO (0);
+		} else {
+			MDIO (1);
+		}
+		MIIDELAY;
+		MDC (1);
+		MIIDELAY;
+		value <<= 1;
+	}
+
+	/*
+	 * Tri-state the MDIO line.
+	 */
+	MDIO_TRISTATE;
+	MDC (0);
+	MIIDELAY;
+	MDC (1);
+	MIIDELAY;
+
+	return 0;
+}