hwmon: do not init sensors on startup

The U-Boot Design Principles[1] clearly say:

  Initialize devices only when they are needed within U-Boot, i.e. don't
  initialize the Ethernet interface(s) unless U-Boot performs a download
  over Ethernet; don't initialize any IDE or USB devices unless U-Boot
  actually tries to load files from these, etc. (and don't forget to
  shut down these devices after using them - otherwise nasty things may
  happen when you try to boot your OS).

So, do not initialize and read the sensors on startup.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>

8 files changed, 13 insertions, 143 deletions

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index d753e9a72f..d074cb7231 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -109,8 +109,8 @@ dtt_write (int sensor, int reg, int val)
 	return 0;
 } /* dtt_write() */
 
-static int
-_dtt_init (int sensor)
+int
+dtt_init_one(int sensor)
 {
 	dtt_cfg_t *dcp = &dttcfg[sensor >> 1];
 	int reg, val;
@@ -164,28 +164,7 @@ _dtt_init (int sensor)
 		return 1;
 
 	return 0;
-} /* _dtt_init() */
-
-int
-dtt_init (void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-	const char *const header = "DTT:   ";
-
-	/* switch to correct I2C bus */
-	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
-
-	for (i = 0; i < sizeof(sensors); i++) {
-		if (_dtt_init(sensors[i]) != 0)
-			printf ("%s%d FAILED INIT\n", header, i+1);
-		else
-			printf ("%s%d is %i C\n", header, i+1,
-				dtt_get_temp(sensors[i]));
-	}
-
-	return (0);
-} /* dtt_init() */
+} /* dtt_init_one() */
 
 int
 dtt_get_temp (int sensor)
diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c
index caef70aff5..b7e36fe461 100644
--- a/drivers/hwmon/adt7460.c
+++ b/drivers/hwmon/adt7460.c
@@ -50,7 +50,7 @@ int dtt_write(int sensor, int reg, int val)
 	return 0;
 }
 
-int dtt_init(void)
+int dtt_init_one(int sensor)
 {
 	printf("ADT7460 at I2C address 0x%2x\n", ADT7460_ADDRESS);
 
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 5a2ea62899..4e1db6dc0b 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -126,7 +126,7 @@ int dtt_write(int sensor, int reg, int val)
 }
 
 
-static int _dtt_init(int sensor)
+int dtt_init_one(int sensor)
 {
 	int val;
 
@@ -155,23 +155,6 @@ static int _dtt_init(int sensor)
 	return 0;
 }
 
-
-int dtt_init (void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-
-	for (i = 0; i < sizeof(sensors); i++) {
-		if (_dtt_init(sensors[i]) != 0)
-			printf("DTT%d:  FAILED\n", i + 1);
-		else
-			printf("DTT%d:  %i C\n", i + 1, dtt_get_temp(sensors[i]));
-	}
-
-	return (0);
-}
-
-
 int dtt_get_temp(int sensor)
 {
 	int i;
diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
index 80fb26f7b5..feabdf2210 100644
--- a/drivers/hwmon/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -98,7 +98,7 @@ int dtt_write(int sensor, int reg, int val)
 }
 
 
-static int _dtt_init(int sensor)
+int dtt_init_one(int sensor)
 {
 	int val;
 
@@ -133,23 +133,6 @@ static int _dtt_init(int sensor)
 	return 0;
 }
 
-
-int dtt_init (void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-
-	for (i = 0; i < sizeof(sensors); i++) {
-		if (_dtt_init(sensors[i]) != 0)
-			printf("DTT%d:  FAILED\n", i+1);
-		else
-			printf("DTT%d:  %i C\n", i+1, dtt_get_temp(sensors[i]));
-	}
-
-	return (0);
-}
-
-
 int dtt_get_temp(int sensor)
 {
 	return (dtt_read(sensor, DTT_READ_TEMP) / 256);
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 2f1f3cfabf..f3adf64859 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -101,7 +101,7 @@ static int is_lm64(int sensor)
 	return sensor && (sensor != DTT_I2C_LM63_ADDR);
 }
 
-static int _dtt_init(int sensor)
+int dtt_init_one(int sensor)
 {
 	int i;
 	int val;
@@ -175,20 +175,3 @@ int dtt_get_temp(int sensor)
 	/* Ignore LSB for now, U-Boot only prints natural numbers */
 	return temp >> 8;
 }
-
-int dtt_init(void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-	const char *const header = "DTT:   ";
-
-	for (i = 0; i < sizeof(sensors); i++) {
-		if (_dtt_init(sensors[i]) != 0)
-			printf("%s%d FAILED INIT\n", header, i + 1);
-		else
-			printf("%s%d is %i C\n", header, i + 1,
-			       dtt_get_temp(sensors[i]));
-	}
-
-	return 0;
-}
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 7b5d893ff2..45cc6db58b 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -112,7 +112,7 @@ int dtt_write(int const sensor, int const reg, int const val)
 			      dlen);
 } /* dtt_write() */
 
-static int _dtt_init(int const sensor)
+int dtt_init_one(int const sensor)
 {
 	int val;
 
@@ -148,23 +148,7 @@ static int _dtt_init(int const sensor)
 
 	dtt_read(sensor, DTT_CONTROL);	/* clear temperature flags */
 	return 0;
-} /* _dtt_init() */
-
-int dtt_init(void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-	const char *const header = "DTT:   ";
-
-	for (i = 0; i < sizeof(sensors); i++) {
-		if (0 != _dtt_init(sensors[i]))
-			printf("%s%d FAILED INIT\n", header, i + 1);
-		else
-			printf("%s%d is %i C\n", header, i + 1,
-			       dtt_get_temp(sensors[i]));
-	}
-	return 0;
-} /* dtt_init() */
+} /* dtt_init_one() */
 
 int dtt_get_temp(int const sensor)
 {
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 81198215ff..29c1a392ee 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -119,7 +119,7 @@ int dtt_write(int sensor, int reg, int val)
 } /* dtt_write() */
 
 
-static int _dtt_init(int sensor)
+int dtt_init_one(int sensor)
 {
 	int val;
 
@@ -145,32 +145,7 @@ static int _dtt_init(int sensor)
 		return 1;
 
 	return 0;
-} /* _dtt_init() */
-
-
-int dtt_init (void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-	const char *const header = "DTT:   ";
-	int old_bus;
-
-	/* switch to correct I2C bus */
-	old_bus = I2C_GET_BUS();
-	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
-
-	for (i = 0; i < sizeof(sensors); i++) {
-	if (_dtt_init(sensors[i]) != 0)
-		printf("%s%d FAILED INIT\n", header, i+1);
-	else
-		printf("%s%d is %i C\n", header, i+1,
-		dtt_get_temp(sensors[i]));
-	}
-	/* switch back to original I2C bus */
-	I2C_SET_BUS(old_bus);
-
-	return (0);
-} /* dtt_init() */
+} /* dtt_init_one() */
 
 int dtt_get_temp(int sensor)
 {
diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c
index afe5b0de3f..f1572ba270 100644
--- a/drivers/hwmon/lm81.c
+++ b/drivers/hwmon/lm81.c
@@ -89,7 +89,7 @@ int dtt_write(int sensor, int reg, int val)
 #define DTT_CONFIG	0x40
 #define DTT_ADR		0x48
 
-static int _dtt_init(int sensor)
+int dtt_init_one(int sensor)
 {
 	int	man;
 	int	adr;
@@ -111,26 +111,9 @@ static int _dtt_init(int sensor)
 
 	debug ("DTT:   Found LM81@%x Rev: %d\n", adr, rev);
 	return 0;
-} /* _dtt_init() */
+} /* dtt_init_one() */
 
 
-int dtt_init (void)
-{
-    int i;
-    unsigned char sensors[] = CONFIG_DTT_SENSORS;
-    const char *const header = "DTT:   ";
-
-    for (i = 0; i < sizeof(sensors); i++) {
-	if (_dtt_init(sensors[i]) != 0)
-	    printf("%s%d FAILED INIT\n", header, i+1);
-	else
-	    printf("%s%d is %i C\n", header, i+1,
-		   dtt_get_temp(sensors[i]));
-    }
-
-    return (0);
-} /* dtt_init() */
-
 #define TEMP_FROM_REG(temp) \
    ((temp)<256?((((temp)&0x1fe) >> 1) * 10)	 + ((temp) & 1) * 5:  \
 	       ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5)  \