net: s3c4510b_eth: drop unused !NET_MULTI driver

No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

3 files changed, 0 insertions, 544 deletions

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0706738d53..f4adb0f66a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -66,7 +66,6 @@ COBJS-$(CONFIG_PLB2800_ETHER) += plb2800_eth.o
 COBJS-$(CONFIG_DRIVER_RTL8019) += rtl8019.o
 COBJS-$(CONFIG_RTL8139) += rtl8139.o
 COBJS-$(CONFIG_RTL8169) += rtl8169.o
-COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
 COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
 COBJS-$(CONFIG_SMC91111) += smc91111.o
 COBJS-$(CONFIG_SMC911X) += smc911x.o
diff --git a/drivers/net/s3c4510b_eth.c b/drivers/net/s3c4510b_eth.c
deleted file mode 100644
index 818ed3d34f..0000000000
--- a/drivers/net/s3c4510b_eth.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/***********************************************************************
- *
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:   Ethernet interface for Samsung S3C4510B SoC
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include <asm/hardware.h>
-#include "s3c4510b_eth.h"
-
-static TX_FrameDescriptor    txFDbase[ETH_MaxTxFrames];
-static MACFrame           txFrameBase[ETH_MaxTxFrames];
-static RX_FrameDescriptor    rxFDbase[PKTBUFSRX];
-static ETH                      m_eth;
-
-static s32 TxFDinit( ETH *eth) {
-
-	s32 i;
-	MACFrame *txFrmBase;
-
-	/* disable cache for access to the TX buffers */
-	txFrmBase = (MACFrame *)( (u32)txFrameBase | CACHE_DISABLE_MASK);
-
-	/* store start of Tx descriptors and set current */
-	eth->m_curTX_FD  =  (TX_FrameDescriptor *) ((u32)txFDbase | CACHE_DISABLE_MASK);
-	eth->m_baseTX_FD = eth->m_curTX_FD;
-
-	for ( i = 0; i < ETH_MaxTxFrames; i++) {
-		eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i];
-		eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner   = 0x0; /* CPU owner */
-		eth->m_baseTX_FD[i].m_opt.ui                  = 0x0;
-		eth->m_baseTX_FD[i].m_status.ui               = 0x0;
-		eth->m_baseTX_FD[i].m_nextFD                  = &eth->m_baseTX_FD[i+1];
-	}
-
-	/* make the list circular */
-	eth->m_baseTX_FD[i-1].m_nextFD          = &eth->m_baseTX_FD[0];
-
-	PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD);
-
-	return 0;
-}
-
-static s32 RxFDinit( ETH *eth) {
-
-	s32 i;
-	/*  MACFrame *rxFrmBase; */
-
-	/* disable cache for access to the RX buffers */
-	/*  rxFrmBase = (MACFrame *)( (u32)rxFrameBase | CACHE_DISABLE_MASK); */
-
-	/* store start of Rx descriptors and set current */
-	eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase | CACHE_DISABLE_MASK);
-	eth->m_baseRX_FD = eth->m_curRX_FD;
-	for ( i = 0; i < PKTBUFSRX; i++) {
-		eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] | CACHE_DISABLE_MASK;
-		eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner   = 0x1; /* BDMA owner */
-		eth->m_baseRX_FD[i].m_reserved                = 0x0;
-		eth->m_baseRX_FD[i].m_status.ui               = 0x0;
-		eth->m_baseRX_FD[i].m_nextFD                  = &eth->m_baseRX_FD[i+1];
-	}
-
-	/* make the list circular */
-	eth->m_baseRX_FD[i-1].m_nextFD                  = &eth->m_baseRX_FD[0];
-
-	PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD);
-
-	return 0;
-}
-
-/*
- * Public u-boot interface functions below
- */
-
-int eth_init(bd_t *bis)
-{
-
-	ETH *eth = &m_eth;
-
-	/* store our MAC address */
-	eth_getenv_enetaddr("ethaddr", eth->m_mac);
-
-	/* setup DBMA and MAC */
-	PUT_REG( REG_BDMARXCON, ETH_BRxRS);   /* reset BDMA RX machine */
-	PUT_REG( REG_BDMATXCON, ETH_BTxRS);   /* reset BDMA TX machine */
-	PUT_REG( REG_MACCON   , ETH_SwReset); /* reset MAC machine */
-	PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame));
-	PUT_REG( REG_MACCON   , 0);           /* reset MAC machine */
-
-	/* init frame descriptors */
-	TxFDinit( eth);
-	RxFDinit( eth);
-
-	/* init the CAM with our MAC address */
-	PUT_REG( REG_CAM_BASE,       (eth->m_mac[0] << 24) |
-		(eth->m_mac[1] << 16) |
-		(eth->m_mac[2] <<  8) |
-		(eth->m_mac[3]));
-	PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) |
-		(eth->m_mac[5] << 16));
-
-	/* enable CAM address 1 -- the MAC we just loaded */
-	PUT_REG( REG_CAMEN, 0x1);
-
-	PUT_REG( REG_CAMCON,
-		ETH_BroadAcc |	/* accept broadcast packetes */
-		ETH_CompEn); /* enable compare mode (check against the CAM) */
-
-	/* configure the BDMA Transmitter control */
-	PUT_REG( REG_BDMATXCON,
-		ETH_BTxBRST   |	/* BDMA Tx burst size 16 words  */
-		ETH_BTxMSL110 |	/* BDMA Tx wait to fill 6/8 of the BDMA */
-		ETH_BTxSTSKO  |	/* BDMA Tx interrupt(Stop) on non-owner TX FD */
-		ETH_BTxEn);	/* BDMA Tx Enable  */
-
-	/* configure the MAC Transmitter control */
-	PUT_REG( REG_MACTXCON,
-		ETH_EnComp | /* interrupt when the MAC transmits or discards packet */
-		ETH_TxEn);	/* MAC transmit enable */
-
-	/* configure the BDMA Receiver control */
-	PUT_REG( REG_BDMARXCON,
-		ETH_BRxBRST   |	/* BDMA Rx Burst Size 16 words */
-		ETH_BRxSTSKO  |	/* BDMA Rx interrupt(Stop) on non-owner RX FD */
-		ETH_BRxMAINC  |	/* BDMA Rx Memory Address increment */
-		ETH_BRxDIE    |	/* BDMA Rx Every Received Frame Interrupt Enable */
-		ETH_BRxNLIE   |	/* BDMA Rx NULL List Interrupt Enable */
-		ETH_BRxNOIE   |	/* BDMA Rx Not Owner Interrupt Enable */
-		ETH_BRxLittle |	/* BDMA Rx Little endian */
-		ETH_BRxEn);	/* BDMA Rx Enable */
-
-	/* configure the MAC Receiver control */
-	PUT_REG( REG_MACRXCON,
-		ETH_RxEn);	/* MAC ETH_RxEn */
-
-	return 0;
-
-}
-
-/* Send a packet	*/
-s32 eth_send(volatile void *packet, s32 length)
-{
-
-	u32 i;
-	ETH *eth = &m_eth;
-
-	if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) {
-		printf("eth_send(): TX Frame.  CPU not owner.\n");
-		return -1;
-	}
-
-	/* copy user data into frame data pointer */
-	memcpy((void *)((u32)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr)),
-	       (void *)packet,
-	       length);
-
-	/* Set TX Frame flags */
-	eth->m_curTX_FD->m_opt.bf.widgetAlign  = 0;
-	eth->m_curTX_FD->m_opt.bf.frameDataDir = 1;
-	eth->m_curTX_FD->m_opt.bf.littleEndian = 1;
-	eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1;
-	eth->m_curTX_FD->m_opt.bf.no_crc       = 0;
-	eth->m_curTX_FD->m_opt.bf.no_padding   = 0;
-
-	/* Set TX Frame length */
-	eth->m_curTX_FD->m_status.bf.len       = length;
-
-	/* Change ownership to BDMA */
-	eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1;
-
-	/* Enable MAC and BDMA Tx control register */
-	SET_REG( REG_BDMATXCON, ETH_BTxEn);
-	SET_REG( REG_MACTXCON,  ETH_TxEn);
-
-	/* poll on TX completion status */
-	while ( !eth->m_curTX_FD->m_status.bf.complete) {
-		/* sleep  */
-		for ( i = 0; i < 0x10000; i ++);
-	}
-
-	/* Change the Tx frame descriptor for next use */
-	eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD;
-
-	return 0;
-}
-
-/* Check for received packets	*/
-s32 eth_rx (void)
-{
-	s32 nLen = 0;
-	ETH *eth = &m_eth;
-
-	/* check if packet ready */
-	if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) {
-		/* process all waiting packets */
-		while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) {
-			nLen = eth->m_curRX_FD->m_status.bf.len;
-			/* call back u-boot -- may call eth_send() */
-			NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen);
-			/* set owner back to CPU */
-			eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1;
-			/* clear status */
-			eth->m_curRX_FD->m_status.ui = 0x0;
-			/* advance to next descriptor */
-			eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD;
-			/* clear received frame bit */
-			PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF);
-		}
-	}
-
-	return nLen;
-}
-
-/* Halt ethernet engine */
-void eth_halt(void)
-{
-	/* disable MAC */
-	PUT_REG( REG_MACCON, ETH_HaltReg);
-}
diff --git a/drivers/net/s3c4510b_eth.h b/drivers/net/s3c4510b_eth.h
deleted file mode 100644
index 18a52a7f4d..0000000000
--- a/drivers/net/s3c4510b_eth.h
+++ /dev/null
@@ -1,302 +0,0 @@
-#ifndef __S3C4510B_ETH_H
-#define __S3C4510B_ETH_H
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * MODULE:        $Id:$
- * Description:   Ethernet interface
- * Runtime Env:   ARM7TDMI
- * Change History:
- *     03-02-04    Create (Curt Brune) curt@cucy.com
- *
- */
-
-#define ETH_MAC_ADDR_SIZE           (6)    /*  dst,src addr is 6bytes each */
-#define ETH_MaxTxFrames             (16)   /*  Max number of Tx Frames */
-
-/*  Buffered DMA Receiver Control Register  */
-#define ETH_BRxBRST     0x0000F  /*  BDMA Rx Burst Size * BRxBRST  */
-				 /*  = Burst Data Size 16 */
-#define ETH_BRxSTSKO    0x00020  /*  BDMA Rx Stop/Skip  Frame or Interrupt(=1)  */
-				 /*  case of not OWNER the current Frame  */
-#define ETH_BRxMAINC    0x00040  /*  BDMA Rx Memory Address Inc/Dec  */
-#define ETH_BRxDIE      0x00080  /*  BDMA Rx Every Received Frame Interrupt Enable */
-#define ETH_BRxNLIE     0x00100  /*  BDMA Rx NULL List Interrupt Enable  */
-#define ETH_BRxNOIE     0x00200  /*  BDMA Rx Not Owner Interrupt Enable */
-#define ETH_BRxMSOIE    0x00400  /*  BDMA Rx Maximum Size over Interrupr Enable  */
-#define ETH_BRxLittle   0x00800  /*  BDMA Rx Big/Little Endian  */
-#define ETH_BRxBig      0x00000  /*  BDMA Rx Big/Little Endian */
-#define ETH_BRxWA01     0x01000  /*  BDMA Rx Word Alignment- one invalid byte  */
-#define ETH_BRxWA10     0x02000  /*  BDMA Rx Word Alignment- two invalid byte */
-#define ETH_BRxWA11     0x03000  /*  BDMA Rx Word Alignment- three invalid byte  */
-#define ETH_BRxEn       0x04000  /*  BDMA Rx Enable */
-#define ETH_BRxRS       0x08000  /*  BDMA Rx Reset */
-#define ETH_RxEmpty     0x10000  /*  BDMA Rx Buffer empty interrupt  */
-#define ETH_BRxEarly    0x20000  /*  BDMA Rx Early notify Interrupt */
-
-/*  Buffered DMA Trasmit Control Register(BDMATXCON)  */
-#define ETH_BTxBRST     0x0000F  /*  BDMA Tx Burst Size = 16  */
-#define ETH_BTxSTSKO    0x00020  /*  BDMA Tx Stop/Skip Frame or Interrupt in case */
-				 /*  of not Owner the current frame  */
-#define ETH_BTxCPIE     0x00080  /*  BDMA Tx Complete to send control  */
-				 /*  packet Enable */
-#define ETH_BTxNOIE     0x00200  /*  BDMA Tx Buffer Not Owner */
-#define ETH_BTxEmpty    0x00400  /*  BDMA Tx Buffer Empty Interrupt  */
-
-/*  BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in.  */
-#define ETH_BTxMSL000   0x00000  /*  No wait to fill the BDMA  */
-#define ETH_BTxMSL001   0x00800  /*  wait to fill 1/8 of the BDMA  */
-#define ETH_BTxMSL010   0x01000  /*  wait to fill 2/8 of the BDMA */
-#define ETH_BTxMSL011   0x01800  /*  wait to fill 3/8 of the BDMA */
-#define ETH_BTxMSL100   0x02000  /*  wait to fill 4/8 of the BDMA */
-#define ETH_BTxMSL101   0x02800  /*  wait to fill 5/8 of the BDMA */
-#define ETH_BTxMSL110   0x03000  /*  wait to fill 6/8 of the BDMA */
-#define ETH_BTxMSL111   0x03800  /*  wait to fill 7/8 of the BDMA */
-#define ETH_BTxEn       0x04000  /*  BDMA Tx Enable  */
-#define ETH_BTxRS       0x08000  /*  BDMA Tx Reset  */
-
-/*  BDMA Status Register  */
-#define ETH_S_BRxRDF    0x00001  /*  BDMA Rx Done Every Received Frame  */
-#define ETH_S_BRxNL     0x00002  /*  BDMA Rx NULL List  */
-#define ETH_S_BRxNO     0x00004  /*  BDMA Rx Not Owner  */
-#define ETH_S_BRxMSO    0x00008  /*  BDMA Rx Maximum Size Over  */
-#define ETH_S_BRxEmpty  0x00010  /*  BDMA Rx Buffer Empty  */
-#define ETH_S_BRxSEarly 0x00020  /*  Early Notify  */
-#define ETH_S_BRxFRF    0x00080  /*  One more frame data in BDMA receive buffer  */
-#define ETH_S_BTxCCP    0x10000  /*  BDMA Tx Complete to send Control Packet  */
-#define ETH_S_BTxNL     0x20000  /*  BDMA Tx Null List  */
-#define ETH_S_BTxNO     0x40000  /*  BDMA Tx Not Owner */
-#define ETH_S_BTxEmpty  0x100000 /*  BDMA Tx Buffer Empty  */
-
-/*  MAC Control Register  */
-#define ETH_HaltReg     0x0001   /*  stop transmission and reception  */
-				 /*  after completion of any current packets  */
-#define ETH_HaltImm     0x0002   /*  Stop transmission and reception immediately  */
-#define ETH_SwReset     0x0004   /*  reset all Ethernet controller state machines */
-				 /*  and FIFOs  */
-#define ETH_FullDup     0x0008   /*  allow transmission to begin while reception */
-				 /*  is occurring  */
-#define ETH_MACLoop     0x0010   /*  MAC loopback */
-#define ETH_ConnM00     0x0000   /*  Automatic-default  */
-#define ETH_ConnM01     0x0020   /*  Force 10Mbits endec */
-#define ETH_ConnM10     0x0040   /*  Force MII (rate determined by MII clock  */
-#define ETH_MIIOFF      0x0040   /*  Force MII (rate determined by MII clock  */
-#define ETH_Loop10      0x0080   /*  Loop 10Mbps  */
-#define ETH_MissRoll    0x0400   /*  Missed error counter rolled over  */
-#define ETH_MDCOFF      0x1000   /*  MII Station Management Clock Off */
-#define ETH_EnMissRoll  0x2000   /*  Interrupt when missed error counter rolls  */
-				 /*  over  */
-#define ETH_Link10      0x8000   /*  Link status 10Mbps  */
-
-/*  CAM control register(CAMCON)  */
-#define ETH_StationAcc  0x0001   /*  Accept any packet with a unicast station  */
-				 /*  address  */
-#define ETH_GroupAcc    0x0002   /*  Accept any packet with multicast-group  */
-				 /*  station address   */
-#define ETH_BroadAcc    0x0004   /*  Accept any packet with a broadcast station */
-				 /*  address  */
-#define ETH_NegCAM      0x0008   /*  0: Accept packets CAM recognizes,  */
-				 /*     reject others */
-				 /*  1: reject packets CAM recognizes,  */
-				 /*     accept others  */
-#define ETH_CompEn      0x0010   /*  Compare Enable mode */
-
-/*  Transmit Control Register(MACTXCON) */
-#define ETH_TxEn        0x0001   /*  transmit Enable  */
-#define ETH_TxHalt      0x0002   /*  Transmit Halt Request  */
-#define ETH_NoPad       0x0004   /*  suppress Padding  */
-#define ETH_NoCRC       0x0008   /*  Suppress CRC  */
-#define ETH_FBack       0x0010   /*  Fast Back-off */
-#define ETH_NoDef       0x0020   /*  Disable the defer counter */
-#define ETH_SdPause     0x0040   /*  Send Pause */
-#define ETH_MII10En     0x0080   /*  MII 10Mbps mode enable */
-#define ETH_EnUnder     0x0100   /*  Enable Underrun */
-#define ETH_EnDefer     0x0200   /*  Enable Deferral */
-#define ETH_EnNCarr     0x0400   /*  Enable No Carrier  */
-#define ETH_EnExColl    0x0800   /*  interrupt if 16 collision occur  */
-				 /*  in the same packet  */
-#define ETH_EnLateColl  0x1000   /*  interrupt if collision occurs after  */
-				 /*  512 bit times(64 bytes times)  */
-#define ETH_EnTxPar     0x2000   /*  interrupt if the MAC transmit FIFO  */
-				 /*  has a parity error  */
-#define ETH_EnComp      0x4000   /*  interrupt when the MAC transmits or  */
-				 /*  discards one packet  */
-
-/*  Transmit Status Register(MACTXSTAT) */
-#define ETH_ExColl      0x0010   /*  Excessive collision  */
-#define ETH_TxDeffered  0x0020   /*  set if 16 collisions occur for same packet */
-#define ETH_Paused      0x0040   /*  packet waited because of pause during  */
-				 /*  transmission  */
-#define ETH_IntTx       0x0080   /*  set if transmission of packet causes an  */
-				 /*  interrupt condiftion  */
-#define ETH_Under       0x0100   /*  MAC transmit FIFO becomes empty during  */
-				 /*  transmission  */
-#define ETH_Defer       0x0200   /*  MAC defers for MAC deferral  */
-#define ETH_NCarr       0x0400   /*  No carrier sense detected during the  */
-				 /*  transmission of a packet  */
-#define ETH_SQE         0x0800   /*  Signal Quality Error */
-#define ETH_LateColl    0x1000   /*  a collision occures after 512 bit times  */
-#define ETH_TxPar       0x2000   /*  MAC transmit FIFO has detected a parity error */
-#define ETH_Comp        0x4000   /*  MAC transmit or discards one packet  */
-#define ETH_TxHalted    0x8000   /*  Transmission was halted by clearing  */
-				 /*  TxEn or Halt immedite  */
-
-/*  Receive Control Register (MACRXCON)  */
-#define ETH_RxEn        0x0001
-#define ETH_RxHalt      0x0002
-#define ETH_LongEn      0x0004
-#define ETH_ShortEn     0x0008
-#define ETH_StripCRC    0x0010
-#define ETH_PassCtl     0x0020
-#define ETH_IgnoreCRC   0x0040
-#define ETH_EnAlign     0x0100
-#define ETH_EnCRCErr    0x0200
-#define ETH_EnOver      0x0400
-#define ETH_EnLongErr   0x0800
-#define ETH_EnRxPar     0x2000
-#define ETH_EnGood      0x4000
-
-/*  Receive Status Register(MACRXSTAT) */
-#define ETH_MCtlRecd    0x0020
-#define ETH_MIntRx      0x0040
-#define ETH_MRx10Stat   0x0080
-#define ETH_MAllignErr  0x0100
-#define ETH_MCRCErr     0x0200
-#define ETH_MOverflow   0x0400
-#define ETH_MLongErr    0x0800
-#define ETH_MRxPar      0x2000
-#define ETH_MRxGood     0x4000
-#define ETH_MRxHalted   0x8000
-
-/*  type of ethernet packets */
-#define ETH_TYPE_ARP  (0x0806)
-#define ETH_TYPE_IP   (0x0800)
-
-#define ETH_HDR_SIZE  (14)
-
-/*  bit field for frame data pointer word */
-typedef struct __BF_FrameDataPtr {
-	u32 dataPtr:31;
-	u32   owner: 1;
-} BF_FrameDataPtr;
-
-typedef union _FrameDataPtr {
-	u32             ui;
-	BF_FrameDataPtr bf;
-} FrameDataPtr;
-
-typedef struct __BF_TX_Options {
-	u32    no_padding: 1;
-	u32        no_crc: 1;
-	u32  macTxIrqEnbl: 1;
-	u32  littleEndian: 1;
-	u32  frameDataDir: 1;
-	u32   widgetAlign: 2;
-	u32      reserved:25;
-} BF_TX_Options;
-
-typedef union _TX_Options {
-	u32    ui;
-	BF_TX_Options   bf;
-} TX_Options;
-
-typedef struct __BF_RX_Status {
-	u32           len:16;	/*  frame length */
-	u32     reserved1: 3;
-	u32       overMax: 1;
-	u32     reserved2: 1;
-	u32       ctrlRcv: 1;
-	u32         intRx: 1;
-	u32      rx10stat: 1;
-	u32      alignErr: 1;
-	u32        crcErr: 1;
-	u32      overFlow: 1;
-	u32       longErr: 1;
-	u32     reserved3: 1;
-	u32     parityErr: 1;
-	u32          good: 1;
-	u32        halted: 1;
-} BF_RX_Status;
-
-typedef union _RX_Status {
-	u32             ui;
-	BF_RX_Status    bf;
-} RX_Status;
-
-typedef struct __BF_TX_Status {
-	u32           len:16;	/*  frame length */
-	u32     txCollCnt: 4;
-	u32        exColl: 1;
-	u32       txDefer: 1;
-	u32        paused: 1;
-	u32         intTx: 1;
-	u32      underRun: 1;
-	u32         defer: 1;
-	u32     noCarrier: 1;
-	u32         SQErr: 1;
-	u32      lateColl: 1;
-	u32     parityErr: 1;
-	u32      complete: 1;
-	u32        halted: 1;
-} BF_TX_Status;
-
-typedef union _TX_Status {
-	u32    ui;
-	BF_TX_Status    bf;
-} TX_Status;
-
-/*  TX descriptor structure  */
-typedef struct __TX_FrameDescriptor {
-	volatile FrameDataPtr  m_frameDataPtr;
-	TX_Options                      m_opt;
-	volatile TX_Status           m_status;
-	struct __TX_FrameDescriptor *m_nextFD;
-} TX_FrameDescriptor;
-
-/*  RX descriptor structure  */
-typedef struct __RX_FrameDescriptor {
-	volatile FrameDataPtr  m_frameDataPtr;
-	u32                        m_reserved;
-	volatile RX_Status           m_status;
-	struct __RX_FrameDescriptor *m_nextFD;
-} RX_FrameDescriptor;
-
-/*  MAC Frame Structure */
-struct __MACFrame {
-	u8     m_dstAddr[6];
-	u8     m_srcAddr[6];
-	u16  m_lengthOrType;
-	u8  m_payload[1506];
-} __attribute__ ((packed));
-
-typedef struct __MACFrame MACFrame;
-
-/* Ethernet Control block */
-typedef struct __ETH {
-	TX_FrameDescriptor   *m_curTX_FD; /*  pointer to current TX frame descriptor */
-	TX_FrameDescriptor  *m_baseTX_FD; /*  pointer to base TX frame descriptor    */
-	RX_FrameDescriptor   *m_curRX_FD; /*  pointer to current RX frame descriptor */
-	RX_FrameDescriptor  *m_baseRX_FD; /*  pointer to base RX frame descriptor    */
-	u8                      m_mac[6]; /*  pointer to our MAC address             */
-} ETH;
-
-#endif