diff options
| author | wdenk <wdenk> | 2004-02-09 23:12:24 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-02-09 23:12:24 +0000 |
| commit | ec4c544bed9b026cdf93084fb0daa73ec53a9cda (patch) | |
| tree | f34aa12b9723120921bf1b34f10579d7c803f687 /doc/README.dk1c20 | |
| parent | b98fff1d6acc57cc54f01740028535ac095237cd (diff) | |
| download | u-boot-ec4c544bed9b026cdf93084fb0daa73ec53a9cda.tar.gz u-boot-ec4c544bed9b026cdf93084fb0daa73ec53a9cda.tar.xz u-boot-ec4c544bed9b026cdf93084fb0daa73ec53a9cda.zip | |
Patches by Stephan Linz, 30 Jan 2004:
1: - board/altera/common/flash.c:flash_erase():
o allow interrupts befor get_timer() call
o check-up each erased sector and avoid unexpected timeouts
- board/altera/dk1c20/dk1s10.c:board_early_init_f():
o enclose sevenseg_set() in cpp condition
- remove the ASMI configuration for DK1S10_standard_32 (never present)
- fix some typed in mistakes in the NIOS documentation
2: - split DK1C20 configuration into several header files:
o two new files for each NIOS CPU description
o U-Boot related part is remaining in DK1C20.h
3: - split DK1S10 configuration into several header files:
o two new files for each NIOS CPU description
o U-Boot related part is remaining in DK1S10.h
4: - Add support for the Microtronix Linux Development Kit
NIOS CPU configuration at the Altera Nios Development Kit,
Stratix Edition (DK-1S10)
5: - Add documentation for the Altera Nios Development Kit,
Stratix Edition (DK-1S10)
6: - Add support for the Nios Serial Peripharel Interface (SPI)
(master only)
7: - Add support for the common U-Boot SPI framework at
RTC driver DS1306
Diffstat (limited to 'doc/README.dk1c20')
| -rw-r--r-- | doc/README.dk1c20 | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/doc/README.dk1c20 b/doc/README.dk1c20 index bf3b6995e1..3c0e41bf7d 100644 --- a/doc/README.dk1c20 +++ b/doc/README.dk1c20 @@ -24,7 +24,7 @@ Contents: 1. Files ========= - board/dk1c20/* + board/altera/dk1c20/* include/configs/DK1C20.h 2. Memory Organization @@ -73,11 +73,7 @@ see the following: 2. Quit nios-run and start your terminal application (e.g. start Hyperterminal or minicom). -3. From the U-Boot command prompt, erase flash 0x40000 to 0x 5ffff: - - ==> erase 1:4-5 - -4. Download the u-boot code to RAM. When using Hyperterminal, do the +3. Download the u-boot code to RAM. When using Hyperterminal, do the following: a. From the u-boot command prompt start a binary download to SRAM: @@ -86,6 +82,10 @@ following: b. Download u-boot.bin using kermit. +4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff: + + ==> erase 1:4-5 + 5. Copy the binary image from SRAM to flash: ==> cp.b 800000 40000 10000 |