Merge branch 'origin'

Conflicts:

	CHANGELOG

39 files changed, 4082 insertions, 282 deletions

diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c
index 2565998e48..826cea8e26 100644
--- a/cpu/arm920t/at91rm9200/i2c.c
+++ b/cpu/arm920t/at91rm9200/i2c.c
@@ -111,7 +111,7 @@ at91_xfer(unsigned char chip, unsigned int addr, int alen,
 int
 i2c_probe(unsigned char chip)
 {
-	char buffer[1];
+	unsigned char buffer[1];
 
 	return at91_xfer(chip, 0, 0, buffer, 1, 1);
 }
@@ -191,7 +191,7 @@ i2c_init(int speed, int slaveaddr)
 
 uchar i2c_reg_read(uchar i2c_addr, uchar reg)
 {
-	char buf;
+	unsigned char buf;
 
 	i2c_read(i2c_addr, reg, 1, &buf, 1);
 
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index b4cc74476b..869ca79d03 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -1647,7 +1647,8 @@ int usb_lowlevel_init(void)
 	}
 
 	/* FIXME this is a second HC reset; why?? */
-	writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
+	gohci.hc_control = OHCI_USB_RESET;
+	writel (gohci.hc_control, &gohci.regs->control);
 	wait_ms (10);
 
 	if (hc_start (&gohci) < 0) {
diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c
index 0457bff964..9cac969f64 100644
--- a/cpu/arm926ejs/interrupts.c
+++ b/cpu/arm926ejs/interrupts.c
@@ -39,16 +39,6 @@
 #include <arm926ejs.h>
 #include <asm/proc-armv/ptrace.h>
 
-#define TIMER_LOAD_VAL 0xffffffff
-
-/* macro to read the 32 bit timer */
-#ifdef CONFIG_OMAP
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
-#endif
-#ifdef CONFIG_VERSATILE
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
-#endif
-
 #ifdef CONFIG_USE_IRQ
 /* enable IRQ interrupts */
 void enable_interrupts (void)
@@ -188,146 +178,14 @@ void do_irq (struct pt_regs *pt_regs)
 
 #else
 
-static ulong timestamp;
-static ulong lastdec;
-
 /* nothing really to do with interrupts, just starts up a counter. */
 int interrupt_init (void)
 {
-#ifdef CONFIG_OMAP
-	int32_t val;
-
-	/* Start the decrementer ticking down from 0xffffffff */
-	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
-	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
-	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
-#endif	/* CONFIG_OMAP */
-
-#ifdef CONFIG_VERSATILE
-	*(volatile ulong *)(CFG_TIMERBASE + 0) = CFG_TIMER_RELOAD;	/* TimerLoad */
-	*(volatile ulong *)(CFG_TIMERBASE + 4) = CFG_TIMER_RELOAD;	/* TimerValue */
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = 0x8C;
-#endif	/* CONFIG_VERSATILE */
-
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
+	extern void timer_init(void);
 
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
+  	timer_init();
 
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-/* delay x useconds AND perserve advance timstamp value */
-void udelay (unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;		/* finish normalize. */
-	}else{				/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer (0);		/* get current timestamp */
-	if( (tmo + tmp + 1) < tmp )	/* if setting this fordward will roll time stamp */
-		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastdec value */
-	else
-		tmo += tmp;		/* else, set advancing stamp wake up time */
-
-	while (get_timer_masked () < tmo)/* loop till event */
-		/*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec = READ_TIMER;  /* capure current decrementer value time */
-	timestamp = 0;	       /* start "advancing" time stamp from 0 */
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;		/* current tick value */
-
-	if (lastdec >= now) {		/* normal mode (non roll) */
-		/* normal mode */
-		timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
-	} else {			/* we have overflow of the count down timer */
-		/* nts = ts + ld + (TLV - now)
-		 * ts=old stamp, ld=time that passed before passing through -1
-		 * (TLV-now) amount of time after passing though -1
-		 * nts = new "advancing time stamp"...it could also roll and cause problems.
-		 */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;		/* finish normalize. */
-	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = CFG_HZ;
-	return tbclk;
+	return 0;
 }
 
 #endif /* CONFIG_INTEGRATOR */
diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile
new file mode 100644
index 0000000000..f9d3378197
--- /dev/null
+++ b/cpu/arm926ejs/omap/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2005
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(SOC).a
+
+OBJS	= timer.o
+SOBJS	= reset.o
+
+all:	.depend $(LIB)
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/omap/reset.S b/cpu/arm926ejs/omap/reset.S
new file mode 100644
index 0000000000..e8989028e2
--- /dev/null
+++ b/cpu/arm926ejs/omap/reset.S
@@ -0,0 +1,45 @@
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, rstctl1	/* get clkm1 reset ctl */
+	mov	r3, #0x0
+	strh	r3, [r1]	/* clear it */
+	mov	r3, #0x8
+	strh	r3, [r1]	/* force dsp+arm reset */
+_loop_forever:
+	b	_loop_forever
+
+rstctl1:
+	.word	0xfffece10
diff --git a/cpu/arm926ejs/omap/timer.c b/cpu/arm926ejs/omap/timer.c
new file mode 100644
index 0000000000..a2a9133ee0
--- /dev/null
+++ b/cpu/arm926ejs/omap/timer.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm926ejs.h>
+
+#define TIMER_LOAD_VAL 0xffffffff
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
+
+static ulong timestamp;
+static ulong lastdec;
+
+int timer_init (void)
+{
+	int32_t val;
+
+	/* Start the decrementer ticking down from 0xffffffff */
+	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
+	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
+	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+
+	/* init the timestamp and lastdec value */
+	reset_timer_masked();
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay (unsigned long usec)
+{
+	ulong tmo, tmp;
+
+	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
+		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo /= 1000;		/* finish normalize. */
+	}else{				/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CFG_HZ;
+		tmo /= (1000*1000);
+	}
+
+	tmp = get_timer (0);		/* get current timestamp */
+	if( (tmo + tmp + 1) < tmp )	/* if setting this fordward will roll time stamp */
+		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastdec value */
+	else
+		tmo += tmp;		/* else, set advancing stamp wake up time */
+
+	while (get_timer_masked () < tmo)/* loop till event */
+		/*NOP*/;
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER;  /* capure current decrementer value time */
+	timestamp = 0;	       /* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER;		/* current tick value */
+
+	if (lastdec >= now) {		/* normal mode (non roll) */
+		/* normal mode */
+		timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
+	} else {			/* we have overflow of the count down timer */
+		/* nts = ts + ld + (TLV - now)
+		 * ts=old stamp, ld=time that passed before passing through -1
+		 * (TLV-now) amount of time after passing though -1
+		 * nts = new "advancing time stamp"...it could also roll and cause problems.
+		 */
+		timestamp += lastdec + TIMER_LOAD_VAL - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
+		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo /= 1000;		/* finish normalize. */
+	} else {			/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CFG_HZ;
+		tmo /= (1000*1000);
+	}
+
+	endtime = get_timer_masked () + tmo;
+
+	do {
+		ulong now = get_timer_masked ();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return tbclk;
+}
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index fc6b20b21e..725c6639a1 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -392,25 +392,3 @@ fiq:
 	bl	do_fiq
 
 #endif
-
-# ifdef CONFIG_INTEGRATOR
-
-	/* Satisfied by Integrator routine (AP or CP) */
-
-#else
-
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, rstctl1	/* get clkm1 reset ctl */
-	mov	r3, #0x0
-	strh	r3, [r1]	/* clear it */
-	mov	r3, #0x8
-	strh	r3, [r1]	/* force dsp+arm reset */
-_loop_forever:
-	b	_loop_forever
-
-rstctl1:
-	.word	0xfffece10
-
-#endif /* #ifdef CONFIG_INTEGRATOR */
diff --git a/cpu/arm926ejs/versatile/Makefile b/cpu/arm926ejs/versatile/Makefile
new file mode 100644
index 0000000000..f9d3378197
--- /dev/null
+++ b/cpu/arm926ejs/versatile/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2005
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(SOC).a
+
+OBJS	= timer.o
+SOBJS	= reset.o
+
+all:	.depend $(LIB)
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/versatile/reset.S b/cpu/arm926ejs/versatile/reset.S
new file mode 100644
index 0000000000..e8989028e2
--- /dev/null
+++ b/cpu/arm926ejs/versatile/reset.S
@@ -0,0 +1,45 @@
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, rstctl1	/* get clkm1 reset ctl */
+	mov	r3, #0x0
+	strh	r3, [r1]	/* clear it */
+	mov	r3, #0x8
+	strh	r3, [r1]	/* force dsp+arm reset */
+_loop_forever:
+	b	_loop_forever
+
+rstctl1:
+	.word	0xfffece10
diff --git a/cpu/arm926ejs/versatile/timer.c b/cpu/arm926ejs/versatile/timer.c
new file mode 100644
index 0000000000..32872d2b66
--- /dev/null
+++ b/cpu/arm926ejs/versatile/timer.c
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm926ejs.h>
+
+#define TIMER_LOAD_VAL 0xffffffff
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
+
+static ulong timestamp;
+static ulong lastdec;
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int timer_init (void)
+{
+	*(volatile ulong *)(CFG_TIMERBASE + 0) = CFG_TIMER_RELOAD;	/* TimerLoad */
+	*(volatile ulong *)(CFG_TIMERBASE + 4) = CFG_TIMER_RELOAD;	/* TimerValue */
+	*(volatile ulong *)(CFG_TIMERBASE + 8) = 0x8C;
+
+	/* init the timestamp and lastdec value */
+	reset_timer_masked();
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay (unsigned long usec)
+{
+	ulong tmo, tmp;
+
+	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
+		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo /= 1000;		/* finish normalize. */
+	}else{				/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CFG_HZ;
+		tmo /= (1000*1000);
+	}
+
+	tmp = get_timer (0);		/* get current timestamp */
+	if( (tmo + tmp + 1) < tmp )	/* if setting this fordward will roll time stamp */
+		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastdec value */
+	else
+		tmo += tmp;		/* else, set advancing stamp wake up time */
+
+	while (get_timer_masked () < tmo)/* loop till event */
+		/*NOP*/;
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER;  /* capure current decrementer value time */
+	timestamp = 0;	       /* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER;		/* current tick value */
+
+	if (lastdec >= now) {		/* normal mode (non roll) */
+		/* normal mode */
+		timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
+	} else {			/* we have overflow of the count down timer */
+		/* nts = ts + ld + (TLV - now)
+		 * ts=old stamp, ld=time that passed before passing through -1
+		 * (TLV-now) amount of time after passing though -1
+		 * nts = new "advancing time stamp"...it could also roll and cause problems.
+		 */
+		timestamp += lastdec + TIMER_LOAD_VAL - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
+		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
+		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo /= 1000;		/* finish normalize. */
+	} else {			/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CFG_HZ;
+		tmo /= (1000*1000);
+	}
+
+	endtime = get_timer_masked () + tmo;
+
+	do {
+		ulong now = get_timer_masked ();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return tbclk;
+}
diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile
new file mode 100644
index 0000000000..c63a8f6d01
--- /dev/null
+++ b/cpu/bf533/Makefile
@@ -0,0 +1,46 @@
+# U-boot - Makefile
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o
+OBJS	= cpu.o traps.o ints.o serial.o interrupts.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h
new file mode 100644
index 0000000000..d430e6cabd
--- /dev/null
+++ b/cpu/bf533/bf533_serial.h
@@ -0,0 +1,78 @@
+/*
+ * U-boot - bf533_serial.h Serial Driver defines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
+ * Copyright (C) 2003	Bas Vermeulen <bas@buyways.nl>
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.h: Definitions for the BlackFin DSP serial driver.
+ *
+ * Copyright (C) 2001	Tony Z. Kou	tonyko@arcturusnetworks.com
+ * Copyright (C) 2001   Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328serial.c which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _Bf533_SERIAL_H
+#define _Bf533_SERIAL_H
+
+#include <linux/config.h>
+#include <asm/blackfin.h>
+
+#define SYNC_ALL	__asm__ __volatile__ ("ssync;\n")
+#define ACCESS_LATCH	*pUART_LCR |= UART_LCR_DLAB;
+#define ACCESS_PORT_IER	*pUART_LCR &= (~UART_LCR_DLAB);
+
+void serial_setbrg(void);
+static void local_put_char(char ch);
+void calc_baud(void);
+void serial_setbrg(void);
+int serial_init(void);
+void serial_putc(const char c);
+int serial_tstc(void);
+int serial_getc(void);
+void serial_puts(const char *s);
+static void local_put_char(char ch);
+
+extern int get_clock(void);
+int baud_table[5] = {9600, 19200, 38400, 57600, 115200};
+
+struct {
+	unsigned char dl_high;
+	unsigned char dl_low;
+} hw_baud_table[5];
+
+#ifdef CONFIG_STAMP
+extern unsigned long pll_div_fact;
+#endif
+
+#endif
diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S
new file mode 100644
index 0000000000..8fac402740
--- /dev/null
+++ b/cpu/bf533/cache.S
@@ -0,0 +1,125 @@
+
+
+#define ASSEMBLY
+#include <asm/linkage.h>
+#include <asm/cpu/def_LPBlackfin.h>
+
+.text
+.align 2
+ENTRY(blackfin_icache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	IFLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	IFLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(blackfin_dcache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	FLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_icache_invalidate)
+ENTRY(invalidate_entire_icache)
+	[--SP] = ( R7:5);
+
+	P0.L = (IMEM_CONTROL & 0xFFFF);
+	P0.H = (IMEM_CONTROL >> 16);
+	R7 = [P0];
+
+	/* Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7,IMC_P);
+	CLI R6;
+	SSYNC;		/* SSYNC required before invalidating cache. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	( R7:5) = [SP++];
+	RTS;
+
+/* Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+ENTRY(invalidate_entire_dcache)
+ENTRY(_dcache_invalidate)
+	[--SP] = ( R7:6);
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+	R7 = [P0];
+
+	/* Clear the DMC[1:0] bits, All valid bits in the data
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7,DMC0_P);
+	BITCLR(R7,DMC1_P);
+	CLI R6;
+	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the data cache again */
+
+	R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	( R7:6) = [SP++];
+	RTS;
+
+ENTRY(blackfin_dcache_invalidate_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSHINV[P0++];
+	CC = P0 < P1 (iu);
+	IF CC JUMP 1b (bp);
+
+	/* If the data crosses a cache line, then we'll be pointing to
+	** the last cache line, but won't have flushed/invalidated it yet, so do
+	** one more.
+	*/
+	FLUSHINV[P0];
+	SSYNC;
+	RTS;
diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk
new file mode 100644
index 0000000000..a9d529ecd8
--- /dev/null
+++ b/cpu/bf533/config.mk
@@ -0,0 +1,27 @@
+# U-boot - config.mk
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -ffixed-P5
diff --git a/cpu/bf533/cplbhdlr.S b/cpu/bf533/cplbhdlr.S
new file mode 100644
index 0000000000..61be5bb90c
--- /dev/null
+++ b/cpu/bf533/cplbhdlr.S
@@ -0,0 +1,193 @@
+/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ *
+ * Blackfin BF533/2.6 support : LG Soft India
+ */
+
+
+/* Include an exception handler to invoke the CPLB manager
+ */
+
+#include <asm-blackfin/linkage.h>
+#include <asm/cplb.h>
+#include <asm/entry.h>
+
+
+.text
+
+.globl _cplb_hdr;
+.type _cplb_hdr, STT_FUNC;
+.extern _cplb_mgr;
+.type _cplb_mgr, STT_FUNC;
+.extern __unknown_exception_occurred;
+.type __unknown_exception_occurred, STT_FUNC;
+.extern __cplb_miss_all_locked;
+.type __cplb_miss_all_locked, STT_FUNC;
+.extern __cplb_miss_without_replacement;
+.type __cplb_miss_without_replacement, STT_FUNC;
+.extern __cplb_protection_violation;
+.type __cplb_protection_violation, STT_FUNC;
+.extern panic_pv;
+
+.align 2;
+
+ENTRY(_cplb_hdr)
+	SSYNC;
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = ASTAT;
+	[--SP] = SEQSTAT;
+	[--SP] = I0;
+	[--SP] = I1;
+	[--SP] = I2;
+	[--SP] = I3;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC0;
+	[--SP] = LT1;
+	[--SP] = LB1;
+	[--SP] = LC1;
+	R2 = SEQSTAT;
+
+	/*Mask the contents of SEQSTAT and leave only EXCAUSE in R2*/
+	R2 <<= 26;
+	R2 >>= 26;
+
+	R1 = 0x23; /* Data access CPLB protection violation */
+	CC = R2 == R1;
+	IF !CC JUMP not_data_write;
+	R0 = 2;		/* is a write to data space*/
+	JUMP is_icplb_miss;
+
+not_data_write:
+	R1 = 0x2C; /* CPLB miss on an instruction fetch */
+	CC = R2 == R1;
+	R0 = 0;		/* is_data_miss == False*/
+	IF CC JUMP is_icplb_miss;
+
+	R1 = 0x26;
+	CC = R2 == R1;
+	IF !CC JUMP unknown;
+
+	R0 = 1;		/* is_data_miss == True*/
+
+is_icplb_miss:
+
+#if ( defined (CONFIG_BLKFIN_CACHE) || defined (CONFIG_BLKFIN_DCACHE))
+#if ( defined (CONFIG_BLKFIN_CACHE) && !defined (CONFIG_BLKFIN_DCACHE))
+	R1 = CPLB_ENABLE_ICACHE;
+#endif
+#if ( !defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE))
+	R1 = CPLB_ENABLE_DCACHE;
+#endif
+#if ( defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE))
+	R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
+#endif
+#else
+	R1 = 0;
+#endif
+
+	[--SP] = RETS;
+	CALL _cplb_mgr;
+	RETS = [SP++];
+	CC = R0 == 0;
+	IF !CC JUMP not_replaced;
+	LC1 = [SP++];
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC0 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	I3 = [SP++];
+	I2 = [SP++];
+	I1 = [SP++];
+	I0 = [SP++];
+	SEQSTAT = [SP++];
+	ASTAT = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+unknown:
+	[--SP] = RETS;
+	CALL __unknown_exception_occurred;
+	RETS = [SP++];
+	JUMP unknown;
+not_replaced:
+	CC = R0 == CPLB_NO_UNLOCKED;
+	IF !CC JUMP next_check;
+	[--SP] = RETS;
+	CALL __cplb_miss_all_locked;
+	RETS = [SP++];
+next_check:
+	CC = R0 == CPLB_NO_ADDR_MATCH;
+	IF !CC JUMP next_check2;
+	[--SP] = RETS;
+	CALL __cplb_miss_without_replacement;
+	RETS = [SP++];
+	JUMP not_replaced;
+next_check2:
+	CC = R0 == CPLB_PROT_VIOL;
+	IF !CC JUMP strange_return_from_cplb_mgr;
+	[--SP] = RETS;
+	CALL __cplb_protection_violation;
+	RETS = [SP++];
+	JUMP not_replaced;
+strange_return_from_cplb_mgr:
+	IDLE;
+	CSYNC;
+	JUMP strange_return_from_cplb_mgr;
+
+/************************************
+ * Diagnostic exception handlers
+ */
+
+__cplb_miss_all_locked:
+	sp += -12;
+	R0 = CPLB_NO_UNLOCKED;
+	call panic_bfin;
+	SP += 12;
+	RTS;
+
+ __cplb_miss_without_replacement:
+	sp += -12;
+	R0 = CPLB_NO_ADDR_MATCH;
+	call panic_bfin;
+	SP += 12;
+	RTS;
+
+__cplb_protection_violation:
+	sp += -12;
+	R0 = CPLB_PROT_VIOL;
+	call panic_bfin;
+	SP += 12;
+	RTS;
+
+__unknown_exception_occurred:
+
+	/* This function is invoked by the default exception
+	 * handler, if it does not recognise the kind of
+	 * exception that has occurred. In other words, the
+	 * default handler only handles some of the system's
+	 * exception types, and it does not expect any others
+	 * to occur. If your application is going to be using
+	 * other kinds of exceptions, you must replace the
+	 * default handler with your own, that handles all the
+	 * exceptions you will use.
+	 *
+	 * Since there's nothing we can do, we just loop here
+	 * at what we hope is a suitably informative label.
+	 */
+
+	IDLE;
+do_not_know_what_to_do:
+	CSYNC;
+	JUMP __unknown_exception_occurred;
+
+	RTS;
+.__unknown_exception_occurred.end:
+.global __unknown_exception_occurred;
+.type __unknown_exception_occurred, STT_FUNC;
+
+panic_bfin:
+	RTS;
diff --git a/cpu/bf533/cplbmgr.S b/cpu/bf533/cplbmgr.S
new file mode 100644
index 0000000000..7a0b048629
--- /dev/null
+++ b/cpu/bf533/cplbmgr.S
@@ -0,0 +1,601 @@
+/*This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ *
+ * Blackfin BF533/2.6 support : LG Soft India
+ * Modification: Dec 07 2004
+ *	1. Correction in icheck_lock.  Valid lock entries were
+ *	   geting victimized, for instruction cplb replacement.
+ *	2. Setup loop's are modified as now toolchain support's P Indexed
+ *	   addressing
+ *	   :LG Soft India
+ *
+ */
+
+/* Usage: int _cplb_mgr(is_data_miss,int enable_cache)
+ * is_data_miss==2 => Mark as Dirty, write to the clean data page
+ * is_data_miss==1 => Replace a data CPLB.
+ * is_data_miss==0 => Replace an instruction CPLB.
+ *
+ * Returns:
+ * CPLB_RELOADED	=> Successfully updated CPLB table.
+ * CPLB_NO_UNLOCKED	=> All CPLBs are locked, so cannot be evicted.This indicates
+ *				that the CPLBs in the configuration tablei are badly
+ *				configured, as this should never occur.
+ * CPLB_NO_ADDR_MATCH	=> The address being accessed, that triggered the exception,
+ *				is not covered by any of the CPLBs in the configuration
+ *				table. The application isi presumably misbehaving.
+ * CPLB_PROT_VIOL	=> The address being accessed, that triggered thei exception,
+ *				was not a first-write to a clean Write Back Data page,
+ *				and so presumably is a genuine violation of the page's
+ *				protection attributes. The application is misbehaving.
+ */
+#define ASSEMBLY
+
+#include <asm-blackfin/linkage.h>
+#include <asm-blackfin/blackfin.h>
+#include <asm-blackfin/cplbtab.h>
+#include <asm-blackfin/cplb.h>
+
+.text
+
+.align 2;
+ENTRY(_cplb_mgr)
+
+	[--SP]=( R7:0,P5:0 );
+
+	CC = R0 == 2;
+	IF CC JUMP dcplb_write;
+
+	CC = R0 == 0;
+	IF !CC JUMP dcplb_miss_compare;
+
+	/* ICPLB Miss Exception. We need to choose one of the
+	* currently-installed CPLBs, and replace it with one
+	* from the configuration table.
+	*/
+
+	P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
+	P4.H = (ICPLB_FAULT_ADDR >> 16);
+
+	P1 = 16;
+	P5.L = page_size_table;
+	P5.H = page_size_table;
+
+	P0.L = (ICPLB_DATA0 & 0xFFFF);
+	P0.H = (ICPLB_DATA0 >> 16);
+	R4 = [P4];		/* Get faulting address*/
+	R6 = 64;		/* Advance past the fault address, which*/
+	R6 = R6 + R4;		/* we'll use if we find a match*/
+	R3 = ((16 << 8) | 2);	/* Extract mask, bits 16 and 17.*/
+
+	R5 = 0;
+isearch:
+
+	R1 = [P0-0x100];	/* Address for this CPLB */
+
+	R0 = [P0++];		/* Info for this CPLB*/
+	CC = BITTST(R0,0);	/* Is the CPLB valid?*/
+	IF !CC JUMP nomatch;	/* Skip it, if not.*/
+	CC = R4 < R1(IU);	/* If fault address less than page start*/
+	IF CC JUMP nomatch;	/* then skip this one.*/
+	R2 = EXTRACT(R0,R3.L) (Z);	/* Get page size*/
+	P1 = R2;
+	P1 = P5 + (P1<<2);	/* index into page-size table*/
+	R2 = [P1];		/* Get the page size*/
+	R1 = R1 + R2;		/* and add to page start, to get page end*/
+	CC = R4 < R1(IU);	/* and see whether fault addr is in page.*/
+	IF !CC R4 = R6;		/* If so, advance the address and finish loop.*/
+	IF !CC JUMP isearch_done;
+nomatch:
+	/* Go around again*/
+	R5 += 1;
+	CC = BITTST(R5, 4);	/* i.e CC = R5 >= 16*/
+	IF !CC JUMP isearch;
+
+isearch_done:
+	I0 = R4;		/* Fault address we'll search for*/
+
+	/* set up pointers */
+	P0.L = (ICPLB_DATA0 & 0xFFFF);
+	P0.H = (ICPLB_DATA0 >> 16);
+
+	/* The replacement procedure for ICPLBs */
+
+	P4.L = (IMEM_CONTROL & 0xFFFF);
+	P4.H = (IMEM_CONTROL >> 16);
+
+	/* disable cplbs */
+	R5 = [P4];		/* Control Register*/
+	BITCLR(R5,ENICPLB_P);
+	CLI R1;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R1;
+
+	R1 = -1;		/* end point comparison */
+	R3 = 16;		/* counter */
+
+	/* Search through CPLBs for first non-locked entry */
+	/* Overwrite it by moving everyone else up by 1 */
+icheck_lock:
+	R0 = [P0++];
+	R3 = R3 + R1;
+	CC = R3 == R1;
+	IF CC JUMP all_locked;
+	CC = BITTST(R0, 0);		/* an invalid entry is good */
+	IF !CC JUMP ifound_victim;
+	CC = BITTST(R0,1);		/* but a locked entry isn't */
+	IF CC JUMP icheck_lock;
+
+ifound_victim:
+#ifdef CONFIG_CPLB_INFO
+	R7 = [P0 - 0x104];
+	P2.L = ipdt_table;
+	P2.H = ipdt_table;
+	P3.L = ipdt_swapcount_table;
+	P3.H = ipdt_swapcount_table;
+	P3 += -4;
+icount:
+	R2 = [P2];	/* address from config table */
+	P2 += 8;
+	P3 += 8;
+	CC = R2==-1;
+	IF CC JUMP icount_done;
+	CC = R7==R2;
+	IF !CC JUMP icount;
+	R7 = [P3];
+	R7 += 1;
+	[P3] = R7;
+	CSYNC;
+icount_done:
+#endif
+	LC0=R3;
+	LSETUP(is_move,ie_move) LC0;
+is_move:
+	R0 = [P0];
+	[P0 - 4] = R0;
+	R0 = [P0 - 0x100];
+	[P0-0x104] = R0;
+ie_move:P0+=4;
+
+	/* We've made space in the ICPLB table, so that ICPLB15
+	 * is now free to be overwritten. Next, we have to determine
+	 * which CPLB we need to install, from the configuration
+	 * table. This is a matter of getting the start-of-page
+	 * addresses and page-lengths from the config table, and
+	 * determining whether the fault address falls within that
+	 * range.
+	 */
+
+	P2.L = ipdt_table;
+	P2.H = ipdt_table;
+#ifdef	CONFIG_CPLB_INFO
+	P3.L = ipdt_swapcount_table;
+	P3.H = ipdt_swapcount_table;
+	P3 += -8;
+#endif
+	P0.L = page_size_table;
+	P0.H = page_size_table;
+
+	/* Retrieve our fault address (which may have been advanced
+	 * because the faulting instruction crossed a page boundary).
+	 */
+
+	R0 = I0;
+
+	/* An extraction pattern, to get the page-size bits from
+	 * the CPLB data entry. Bits 16-17, so two bits at posn 16.
+	 */
+
+	R1 = ((16<<8)|2);
+inext:	R4 = [P2++];	/* address from config table */
+	R2 = [P2++];	/* data from config table */
+#ifdef	CONFIG_CPLB_INFO
+	P3 += 8;
+#endif
+
+	CC = R4 == -1;	/* End of config table*/
+	IF CC JUMP no_page_in_table;
+
+	/* See if failed address > start address */
+	CC = R4 <= R0(IU);
+	IF !CC JUMP inext;
+
+	/* extract page size (17:16)*/
+	R3 = EXTRACT(R2, R1.L) (Z);
+
+	/* add page size to addr to get range */
+
+	P5 = R3;
+	P5 = P0 + (P5 << 2);	/* scaled, for int access*/
+	R3 = [P5];
+	R3 = R3 + R4;
+
+	/* See if failed address < (start address + page size) */
+	CC = R0 < R3(IU);
+	IF !CC JUMP inext;
+
+	/* We've found a CPLB in the config table that covers
+	 * the faulting address, so install this CPLB into the
+	 * last entry of the table.
+	 */
+
+	P1.L = (ICPLB_DATA15 & 0xFFFF);		/*ICPLB_DATA15*/
+	P1.H = (ICPLB_DATA15 >> 16);
+	[P1] = R2;
+	[P1-0x100] = R4;
+#ifdef	CONFIG_CPLB_INFO
+	R3 = [P3];
+	R3 += 1;
+	[P3] = R3;
+#endif
+
+	/* P4 points to IMEM_CONTROL, and R5 contains its old
+	 * value, after we disabled ICPLBS. Re-enable them.
+	 */
+
+	BITSET(R5,ENICPLB_P);
+	CLI R2;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R2;
+
+	( R7:0,P5:0 ) = [SP++];
+	R0 = CPLB_RELOADED;
+	RTS;
+
+/* FAILED CASES*/
+no_page_in_table:
+	( R7:0,P5:0 ) = [SP++];
+	R0 = CPLB_NO_ADDR_MATCH;
+	RTS;
+all_locked:
+	( R7:0,P5:0 ) = [SP++];
+	R0 = CPLB_NO_UNLOCKED;
+	RTS;
+prot_violation:
+	( R7:0,P5:0 ) = [SP++];
+	R0 = CPLB_PROT_VIOL;
+	RTS;
+
+dcplb_write:
+
+	/* if a DCPLB is marked as write-back (CPLB_WT==0), and
+	 * it is clean (CPLB_DIRTY==0), then a write to the
+	 * CPLB's page triggers a protection violation. We have to
+	 * mark the CPLB as dirty, to indicate that there are
+	 * pending writes associated with the CPLB.
+	 */
+
+	P4.L = (DCPLB_STATUS & 0xFFFF);
+	P4.H = (DCPLB_STATUS >> 16);
+	P3.L = (DCPLB_DATA0 & 0xFFFF);
+	P3.H = (DCPLB_DATA0 >> 16);
+	R5 = [P4];
+
+	/* A protection violation can be caused by more than just writes
+	 * to a clean WB page, so we have to ensure that:
+	 * - It's a write
+	 * - to a clean WB page
+	 * - and is allowed in the mode the access occurred.
+	 */
+
+	CC = BITTST(R5, 16);	/* ensure it was a write*/
+	IF !CC JUMP prot_violation;
+
+	/* to check the rest, we have to retrieve the DCPLB.*/
+
+	/* The low half of DCPLB_STATUS is a bit mask*/
+
+	R2 = R5.L (Z);	/* indicating which CPLB triggered the event.*/
+	R3 = 30;	/* so we can use this to determine the offset*/
+	R2.L = SIGNBITS R2;
+	R2 = R2.L (Z);	/* into the DCPLB table.*/
+	R3 = R3 - R2;
+	P4 = R3;
+	P3 = P3 + (P4<<2);
+	R3 = [P3];	/* Retrieve the CPLB*/
+
+	/* Now we can check whether it's a clean WB page*/
+
+	CC = BITTST(R3, 14);	/* 0==WB, 1==WT*/
+	IF CC JUMP prot_violation;
+	CC = BITTST(R3, 7);	/* 0 == clean, 1 == dirty*/
+	IF CC JUMP prot_violation;
+
+	/* Check whether the write is allowed in the mode that was active.*/
+
+	R2 = 1<<3;		/* checking write in user mode*/
+	CC = BITTST(R5, 17);	/* 0==was user, 1==was super*/
+	R5 = CC;
+	R2 <<= R5;		/* if was super, check write in super mode*/
+	R2 = R3 & R2;
+	CC = R2 == 0;
+	IF CC JUMP prot_violation;
+
+	/* It's a genuine write-to-clean-page.*/
+
+	BITSET(R3, 7);		/* mark as dirty*/
+	[P3] = R3;		/* and write back.*/
+	CSYNC;
+	( R7:0,P5:0 ) = [SP++];
+	R0 = CPLB_RELOADED;
+	RTS;
+
+dcplb_miss_compare:
+
+	/* Data CPLB Miss event. We need to choose a CPLB to
+	 * evict, and then locate a new CPLB to install from the
+	 * config table, that covers the faulting address.
+	 */
+
+	P1.L = (DCPLB_DATA15 & 0xFFFF);
+	P1.H = (DCPLB_DATA15 >> 16);
+
+	P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
+	P4.H = (DCPLB_FAULT_ADDR >> 16);
+	R4 = [P4];
+	I0 = R4;
+
+	/* The replacement procedure for DCPLBs*/
+
+	R6 = R1;	/* Save for later*/
+
+	/* Turn off CPLBs while we work.*/
+	P4.L = (DMEM_CONTROL & 0xFFFF);
+	P4.H = (DMEM_CONTROL >> 16);
+	R5 = [P4];
+	BITCLR(R5,ENDCPLB_P);
+	CLI R0;
+	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R0;
+
+	/* Start looking for a CPLB to evict. Our order of preference
+	 * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs
+	 * are no good.
+	 */
+
+	I1.L = (DCPLB_DATA0 & 0xFFFF);
+	I1.H = (DCPLB_DATA0 >> 16);
+	P1 = 3;
+	P2 = 16;
+	I2.L = dcplb_preference;
+	I2.H = dcplb_preference;
+	LSETUP(sdsearch1, edsearch1) LC0 = P1;
+sdsearch1:
+	R0 = [I2++];		/* Get the bits we're interested in*/
+	P0 = I1;		/* Go back to start of table*/
+	LSETUP (sdsearch2, edsearch2) LC1 = P2;
+sdsearch2:
+	R1 = [P0++];		/* Fetch each installed CPLB in turn*/
+	R2 = R1 & R0;		/* and test for interesting bits.*/
+	CC = R2 == 0;		/* If none are set, it'll do.*/
+	IF !CC JUMP skip_stack_check;
+
+	R2 = [P0 - 0x104];	/* R2 - PageStart */
+	P3.L = page_size_table; /* retrive end address */
+	P3.H = page_size_table; /* retrive end address */
+	R3 = 0x2;		/* 0th - position, 2 bits -length */
+	nop;			/*Anamoly 05000209*/
+	R7 = EXTRACT(R1,R3.l);
+	R7 = R7 << 2;		/* Page size index offset */
+	P5 = R7;
+	P3 = P3 + P5;
+	R7 = [P3];		/* page size in 1K bytes */
+
+	R7 = R7 << 0xA;		/* in bytes * 1024*/
+	R7 = R2 + R7;		/* R7 - PageEnd */
+	R4 = SP;		/* Test SP is in range */
+
+	CC = R7 < R4;		/* if PageEnd < SP */
+	IF CC JUMP dfound_victim;
+	R3 = 0x284;		/* stack length from start of trap till the point */
+				/* 20 stack locations for future modifications */
+	R4 = R4 + R3;
+	CC = R4 < R2;		/* if SP + stacklen < PageStart */
+	IF CC JUMP dfound_victim;
+skip_stack_check:
+
+edsearch2: NOP;
+edsearch1: NOP;
+
+	/* If we got here, we didn't find a DCPLB we considered
+	 * replacable, which means all of them were locked.
+	 */
+
+	JUMP all_locked;
+dfound_victim:
+
+#ifdef CONFIG_CPLB_INFO
+	R1 = [P0 - 0x104];
+	P2.L = dpdt_table;
+	P2.H = dpdt_table;
+	P3.L = dpdt_swapcount_table;
+	P3.H = dpdt_swapcount_table;
+	P3 += -4;
+dicount:
+	R2 = [P2];
+	P2 += 8;
+	P3 += 8;
+	CC = R2==-1;
+	IF CC JUMP dicount_done;
+	CC = R1==R2;
+	IF !CC JUMP dicount;
+	R1 = [P3];
+	R1 += 1;
+	[P3] = R1;
+	CSYNC;
+dicount_done:
+#endif
+
+	/* Clean down the hardware loops*/
+	R2 = 0;
+	LC1 = R2;
+	LC0 = R2;
+
+	/* There's a suitable victim in [P0-4] (because we've
+	 * advanced already). If it's a valid dirty write-back
+	 * CPLB, we need to flush the pending writes first.
+	 */
+
+	CC = BITTST(R1, 0);	/* Is it valid?*/
+	IF !CC JUMP Ddoverwrite;/* nope.*/
+	CC = BITTST(R1, 7);	/* Is it dirty?*/
+	IF !CC JUMP Ddoverwrite (BP);	/* Nope.*/
+	CC = BITTST(R1, 14);	/* Is it Write-Through?*/
+	IF CC JUMP Ddoverwrite; /* Yep*/
+
+	/* This is a dirty page, so we need to flush all writes
+	 * that are pending on the page.
+	 */
+
+	/* Retrieve the page start address*/
+	R0 = [P0 - 0x104];
+	[--sp] = rets;
+	CALL dcplb_flush;	/* R0==CPLB addr, R1==CPLB data*/
+	rets = [sp++];
+Ddoverwrite:
+
+	/* [P0-4] is a suitable victim CPLB, so we want to
+	 * overwrite it by moving all the following CPLBs
+	 * one space closer to the start.
+	 */
+
+	R1.L = ((DCPLB_DATA15+4) & 0xFFFF);		/*DCPLB_DATA15+4*/
+	R1.H = ((DCPLB_DATA15+4) >> 16);
+	R0 = P0;
+
+	/* If the victim happens to be in DCPLB15,
+	 * we don't need to move anything.
+	 */
+
+	CC = R1 == R0;
+	IF CC JUMP de_moved;
+	R1 = R1 - R0;
+	R1 >>= 2;
+	P1 = R1;
+	LSETUP(ds_move, de_move) LC0=P1;
+ds_move:
+	 R0 = [P0++];	/* move data */
+	[P0 - 8] = R0;
+	R0 = [P0-0x104] /* move address */
+de_move: [P0-0x108] = R0;
+
+	/* We've now made space in DCPLB15 for the new CPLB to be
+	 * installed. The next stage is to locate a CPLB in the
+	 * config table that covers the faulting address.
+	 */
+
+de_moved:NOP;
+	R0 = I0;		/* Our faulting address */
+
+	P2.L = dpdt_table;
+	P2.H = dpdt_table;
+#ifdef	CONFIG_CPLB_INFO
+	P3.L = dpdt_swapcount_table;
+	P3.H = dpdt_swapcount_table;
+	P3 += -8;
+#endif
+
+	P1.L = page_size_table;
+	P1.H = page_size_table;
+
+	/* An extraction pattern, to retrieve bits 17:16.*/
+
+	R1 = (16<<8)|2;
+dnext:	R4 = [P2++];	/* address */
+	R2 = [P2++];	/* data */
+#ifdef	CONFIG_CPLB_INFO
+	P3 += 8;
+#endif
+
+	CC = R4 == -1;
+	IF CC JUMP no_page_in_table;
+
+	/* See if failed address > start address */
+	CC = R4 <= R0(IU);
+	IF !CC JUMP dnext;
+
+	/* extract page size (17:16)*/
+	R3 = EXTRACT(R2, R1.L) (Z);
+
+	/* add page size to addr to get range */
+
+	P5 = R3;
+	P5 = P1 + (P5 << 2);
+	R3 = [P5];
+	R3 = R3 + R4;
+
+	/* See if failed address < (start address + page size) */
+	CC = R0 < R3(IU);
+	IF !CC JUMP dnext;
+
+	/* We've found the CPLB that should be installed, so
+	 * write it into CPLB15, masking off any caching bits
+	 * if necessary.
+	 */
+
+	P1.L = (DCPLB_DATA15 & 0xFFFF);
+	P1.H = (DCPLB_DATA15 >> 16);
+
+	/* If the DCPLB has cache bits set, but caching hasn't
+	 * been enabled, then we want to mask off the cache-in-L1
+	 * bit before installing. Moreover, if caching is off, we
+	 * also want to ensure that the DCPLB has WT mode set, rather
+	 * than WB, since WB pages still trigger first-write exceptions
+	 * even when not caching is off, and the page isn't marked as
+	 * cachable. Finally, we could mark the page as clean, not dirty,
+	 * but we choose to leave that decision to the user; if the user
+	 * chooses to have a CPLB pre-defined as dirty, then they always
+	 * pay the cost of flushing during eviction, but don't pay the
+	 * cost of first-write exceptions to mark the page as dirty.
+	 */
+
+#ifdef CONFIG_BLKFIN_WT
+	BITSET(R6, 14);		/* Set WT*/
+#endif
+
+	[P1] = R2;
+	[P1-0x100] = R4;
+#ifdef	CONFIG_CPLB_INFO
+	R3 = [P3];
+	R3 += 1;
+	[P3] = R3;
+#endif
+
+	/* We've installed the CPLB, so re-enable CPLBs. P4
+	 * points to DMEM_CONTROL, and R5 is the value we
+	 * last wrote to it, when we were disabling CPLBs.
+	 */
+
+	BITSET(R5,ENDCPLB_P);
+	CLI R2;
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R2;
+
+	( R7:0,P5:0 ) = [SP++];
+	R0 = CPLB_RELOADED;
+	RTS;
+
+.data
+.align 4;
+page_size_table:
+.byte4	0x00000400;	/* 1K */
+.byte4	0x00001000;	/* 4K */
+.byte4	0x00100000;	/* 1M */
+.byte4	0x00400000;	/* 4M */
+
+.align 4;
+dcplb_preference:
+.byte4	0x00000001;	/* valid bit */
+.byte4	0x00000082;	/* dirty+lock bits */
+.byte4	0x00000002;	/* lock bit */
diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c
new file mode 100644
index 0000000000..78e2b966bb
--- /dev/null
+++ b/cpu/bf533/cpu.c
@@ -0,0 +1,189 @@
+/*
+ * U-boot - cpu.c CPU specific functions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <command.h>
+#include <asm/entry.h>
+
+#define SSYNC() asm("ssync;")
+#define CACHE_ON 1
+#define CACHE_OFF 0
+
+/* Data Attibutes*/
+
+#define SDRAM_IGENERIC		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
+#define SDRAM_IKERNEL		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define L1_IMEMORY            	(PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL		(PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
+
+#define ANOMALY_05000158		0x200
+#define SDRAM_DGENERIC          (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
+#define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
+#define SDRAM_DKERNEL           (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
+#define L1_DMEMORY              (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
+#define SDRAM_EBIU              (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
+
+static unsigned int icplb_table[16][2]={
+			{0xFFA00000, L1_IMEMORY},
+			{0x00000000, SDRAM_IKERNEL},	/*SDRAM_Page1*/
+			{0x00400000, SDRAM_IKERNEL},	/*SDRAM_Page1*/
+			{0x07C00000, SDRAM_IKERNEL},    /*SDRAM_Page14*/
+			{0x00800000, SDRAM_IGENERIC},	/*SDRAM_Page2*/
+			{0x00C00000, SDRAM_IGENERIC},	/*SDRAM_Page2*/
+			{0x01000000, SDRAM_IGENERIC},	/*SDRAM_Page4*/
+			{0x01400000, SDRAM_IGENERIC},	/*SDRAM_Page5*/
+			{0x01800000, SDRAM_IGENERIC},	/*SDRAM_Page6*/
+			{0x01C00000, SDRAM_IGENERIC},	/*SDRAM_Page7*/
+			{0x02000000, SDRAM_IGENERIC},	/*SDRAM_Page8*/
+			{0x02400000, SDRAM_IGENERIC},	/*SDRAM_Page9*/
+			{0x02800000, SDRAM_IGENERIC},	/*SDRAM_Page10*/
+			{0x02C00000, SDRAM_IGENERIC},	/*SDRAM_Page11*/
+			{0x03000000, SDRAM_IGENERIC},	/*SDRAM_Page12*/
+			{0x03400000, SDRAM_IGENERIC},	/*SDRAM_Page13*/
+};
+
+static unsigned int dcplb_table[16][2]={
+			{0xFFA00000,L1_DMEMORY},
+			{0x00000000,SDRAM_DKERNEL},	/*SDRAM_Page1*/
+			{0x00400000,SDRAM_DKERNEL},	/*SDRAM_Page1*/
+			{0x07C00000,SDRAM_DKERNEL},	/*SDRAM_Page15*/
+			{0x00800000,SDRAM_DGENERIC},	/*SDRAM_Page2*/
+			{0x00C00000,SDRAM_DGENERIC},	/*SDRAM_Page3*/
+			{0x01000000,SDRAM_DGENERIC},	/*SDRAM_Page4*/
+			{0x01400000,SDRAM_DGENERIC},	/*SDRAM_Page5*/
+			{0x01800000,SDRAM_DGENERIC},	/*SDRAM_Page6*/
+			{0x01C00000,SDRAM_DGENERIC},	/*SDRAM_Page7*/
+			{0x02000000,SDRAM_DGENERIC},	/*SDRAM_Page8*/
+			{0x02400000,SDRAM_DGENERIC},	/*SDRAM_Page9*/
+			{0x02800000,SDRAM_DGENERIC},	/*SDRAM_Page10*/
+			{0x02C00000,SDRAM_DGENERIC},	/*SDRAM_Page11*/
+			{0x03000000,SDRAM_DGENERIC},	/*SDRAM_Page12*/
+			{0x20000000,SDRAM_EBIU},	/*For Network */
+};
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	__asm__ __volatile__
+	("cli r3;"
+	"P0 = %0;"
+	"JUMP (P0);"
+	:
+	: "r" (L1_ISRAM)
+	);
+
+	return 0;
+}
+
+/* These functions are just used to satisfy the linker */
+int cpu_init(void)
+{
+	return 0;
+}
+
+int cleanup_before_linux(void)
+{
+	return 0;
+}
+
+void icache_enable(void)
+{
+	unsigned int *I0,*I1;
+	int i;
+
+	I0 = (unsigned int *)ICPLB_ADDR0;
+	I1 = (unsigned int *)ICPLB_DATA0;
+
+	for(i=0;i<16;i++){
+		*I0++ = icplb_table[i][0];
+		*I1++ = icplb_table[i][1];
+		}
+	cli();
+	SSYNC();
+	*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+	SSYNC();
+	sti();
+}
+
+void icache_disable(void)
+{
+	cli();
+	SSYNC();
+	*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+	SSYNC();
+	sti();
+}
+
+int icache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)IMEM_CONTROL;
+
+	if( value & (IMC|ENICPLB) )
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}
+
+void dcache_enable(void)
+{
+	unsigned int *I0,*I1;
+	unsigned int temp;
+	int i;
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	for(i=0;i<16;i++){
+		*I0++ = dcplb_table[i][0];
+		*I1++ = dcplb_table[i][1];
+		}
+	cli();
+	temp = *(unsigned int *)DMEM_CONTROL;
+	SSYNC();
+	*(unsigned int *)DMEM_CONTROL = ACACHE_BCACHE |ENDCPLB |PORT_PREF0|temp;
+	SSYNC();
+	sti();
+}
+
+void dcache_disable(void)
+{
+	cli();
+	SSYNC();
+	*(unsigned int *)DMEM_CONTROL &= ~(ACACHE_BCACHE |ENDCPLB |PORT_PREF0);
+	SSYNC();
+	sti();
+}
+
+int dcache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)DMEM_CONTROL;
+	if( value & (ENDCPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}
diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h
new file mode 100644
index 0000000000..7ec33878ea
--- /dev/null
+++ b/cpu/bf533/cpu.h
@@ -0,0 +1,65 @@
+/*
+ *  U-boot - cpu.h
+ *
+ *  Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CPU_H_
+#define _CPU_H_
+
+#include <command.h>
+
+#define INTERNAL_IRQS (32)
+#define NUM_IRQ_NODES 16
+#define DEF_INTERRUPT_FLAGS 1
+#define MAX_TIM_LOAD	0xFFFFFFFF
+
+void blackfin_irq_panic(int reason, struct pt_regs * reg);
+extern void dump(struct pt_regs * regs);
+void display_excp(void);
+asmlinkage void evt_nmi(void);
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_rst(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+void blackfin_irq_panic(int reason, struct pt_regs * regs);
+void blackfin_free_irq(unsigned int irq, void *dev_id);
+void call_isr(int irq, struct pt_regs * fp);
+void blackfin_do_irq(int vec, struct pt_regs *fp);
+void blackfin_init_IRQ(void);
+void blackfin_enable_irq(unsigned int irq);
+void blackfin_disable_irq(unsigned int irq);
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int blackfin_request_irq(unsigned int irq,
+		     void (*handler)(int, void *, struct pt_regs *),
+		     unsigned long flags,const char *devname,void *dev_id);
+void timer_init(void);
+#endif
diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S
new file mode 100644
index 0000000000..9fbdefc9db
--- /dev/null
+++ b/cpu/bf533/flush.S
@@ -0,0 +1,402 @@
+/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
+ * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ *
+ * Blackfin BF533/2.6 support : LG Soft India
+ */
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+.text
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the instruction cache.
+ */
+
+ENTRY(flush_instruction_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (ICPLB_ADDR0 >> 16);
+	P5.L = (ICPLB_ADDR0 & 0xFFFF);
+	P4.H = (ICPLB_DATA0 >> 16);
+	P4.L = (ICPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL;
+	R6 = 16;
+inext:	R0 = [P5++];
+	R1 = [P4++];
+	[--SP] =  RETS;
+	CALL icplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+iskip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP inext;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular ICPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(icplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP iflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	R3.H = R4.L << 0 ;		/* Save in extraction pattern for later deposit.*/
+
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R3 = sub-bank deposit values
+  	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (ITEST_COMMAND & 0xFFFF);
+	P5.H = (ITEST_COMMAND >> 16);
+	P4.L = (ITEST_DATA0 & 0xFFFF);
+	P4.H = (ITEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 4;
+	LSETUP (ifs1, ife1) LC1 = P2;
+ifs1:	P0 = 32;		/* iterate over all sets*/
+	LSETUP (ifs0, ife0) LC0 = P0;
+ifs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;			/* CSYNC will not work here :(*/
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP ifskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP ifskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	IFLUSH [P3];		/* And flush the entry*/
+ifskip:
+ife0:	R5 += 1;		/* Advance to next Set*/
+ife1:	NOP;
+
+ifinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+iflush_whole_page:
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	IFLUSH [P0++];		/* because CSYNC can't end loops.*/
+	LSETUP (isall, ieall) LC0 = P1;
+isall:IFLUSH [P0++];
+ieall: NOP;
+	SSYNC;
+	JUMP ifinished;
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the data cache.
+ */
+
+ENTRY(flush_data_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (DCPLB_ADDR0 >> 16);
+	P5.L = (DCPLB_ADDR0 & 0xFFFF);
+	P4.H = (DCPLB_DATA0 >> 16);
+	P4.L = (DCPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z);
+	R6 = 16;
+next:	R0 = [P5++];
+	R1 = [P4++];
+	CC = BITTST(R1, 14);	/* Is it write-through?*/
+	IF CC JUMP skip;	/* If so, ignore it.*/
+	R2 = R1 & R7;		/* Is it a dirty, cached page?*/
+	CC = R2;
+	IF !CC JUMP skip;	/* If not, ignore it.*/
+	[--SP] = RETS;
+	CALL dcplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+skip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP next;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular DCPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(dcplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP dflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* The page could be mapped into Bank A or Bank B, depending
+	 * on (a) whether both banks are configured as cache, and
+	 * (b) on whether address bit A[x] is set. x is determined
+	 * by DCBS in DMEM_CONTROL
+	 */
+
+	R2 = 0;			/* Default to Bank A (Bank B would be 1)*/
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+
+	R3 = [P0];		/* If Bank B is not enabled as cache*/
+	CC = BITTST(R3, 2);	/* then Bank A is our only option.*/
+	IF CC JUMP bank_chosen;
+
+	R4 = 1<<14;		/* If DCBS==0, use A[14].*/
+	R5 = R4 << 7;		/* If DCBS==1, use A[23];*/
+	CC = BITTST(R3, 4);
+	IF CC R4 = R5;		/* R4 now has either bit 14 or bit 23 set.*/
+	R5 = R0 & R4;		/* Use it to test the Page address*/
+	CC = R5;		/* and if that bit is set, we use Bank B,*/
+	R2 = CC;		/* else we use Bank A.*/
+	R2 <<= 23;		/* The Bank selection's at posn 23.*/
+
+bank_chosen:
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	R3.H = R4.L << 0 ;		/* Save in extraction pattern for later deposit.*/
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R2 = Bank select mask
+	 * R3 = sub-bank deposit values
+  	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (DTEST_COMMAND & 0xFFFF);
+	P5.H = (DTEST_COMMAND >> 16);
+	P4.L = (DTEST_DATA0 & 0xFFFF);
+	P4.H = (DTEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 2;
+	LSETUP (fs1, fe1) LC1 = P2;
+fs1:	P0 = 64;		/* iterate over all sets*/
+	LSETUP (fs0, fe0) LC0 = P0;
+fs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	R6 = R6 | R2;		/* and Bank. Leave Way==0 at first.*/
+	BITSET(R6,14);
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+	CC = BITTST(R7, 1);	/* Check if dirty*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP fskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	SSYNC;
+	FLUSHINV [P3];		/* And flush the entry*/
+fskip:
+fe0:	R5 += 1;		/* Advance to next Set*/
+fe1:	BITSET(R2, 26);		/* Go to next Way.*/
+
+dfinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+dflush_whole_page:
+
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+    SSYNC;
+	FLUSHINV [P0++];	/* because CSYNC can't end loops.*/
+	LSETUP (eall, eall) LC0 = P1;
+eall:	FLUSHINV [P0++];
+	SSYNC;
+	JUMP dfinished;
+
+.align 4;
+page_prefix_table:
+.byte4 	0xFFFFFC00;	/* 1K */
+.byte4	0xFFFFF000;	/* 4K */
+.byte4	0xFFF00000;	/* 1M */
+.byte4	0xFFC00000;	/* 4M */
+.page_prefix_table.end:
diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S
new file mode 100644
index 0000000000..e780dc6d6b
--- /dev/null
+++ b/cpu/bf533/interrupt.S
@@ -0,0 +1,391 @@
+/*
+ * U-boot - interrupt.S Processing of interrupts and exception handling
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on interrupt.S
+ *
+ * Copyright (C) 2003  Metrowerks, Inc. <mwaddel@metrowerks.com>
+ * Copyright (C) 2002  Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca>
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *                     Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * This file is also based on exception.asm
+ * (C) Copyright 2001-2005 - Analog Devices, Inc.  All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define ASSEMBLY
+
+#include <asm/hw_irq.h>
+#include <asm/entry.h>
+#include <asm/blackfin_defs.h>
+#include <asm/cpu/bf533_irq.h>
+
+.global blackfin_irq_panic;
+
+.text
+.align 2
+
+#ifndef CONFIG_KGDB
+.global evt_emulation
+evt_emulation:
+	SAVE_CONTEXT
+	r0 = IRQ_EMU;
+	r1 = seqstat;
+	sp += -12;
+	call blackfin_irq_panic;
+	sp += 12;
+	rte;
+#endif
+
+.global evt_nmi
+evt_nmi:
+	SAVE_CONTEXT
+	r0 = IRQ_NMI;
+	r1 = RETN;
+	sp += -12;
+	call blackfin_irq_panic;
+	sp += 12;
+
+_evt_nmi_exit:
+	rtn;
+
+.global trap
+trap:
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = p0;
+	[--sp] = p1;
+	[--sp] = astat;
+	r0 = seqstat;
+	R0 <<= 26;
+	R0 >>= 26;
+	p0 = r0;
+	p1.l = EVTABLE;
+	p1.h = EVTABLE;
+	p0 = p1 + (p0 << 1);
+	r1 = W[p0] (Z);
+	p1 = r1;
+	jump (pc + p1);
+
+.global _EVENT1
+_EVENT1:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT2
+_EVENT2:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT3
+_EVENT3:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT4
+_EVENT4:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT5
+_EVENT5:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT6
+_EVENT6:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT7
+_EVENT7:
+	RAISE 15;
+	JUMP.S _EXIT;
+
+.global _EVENT8
+_EVENT8:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT9
+_EVENT9:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT10
+_EVENT10:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT11
+_EVENT11:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT12
+_EVENT12:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT13
+_EVENT13:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT14
+_EVENT14:
+/*	RAISE 14;	*/
+	CALL	_cplb_hdr;
+	JUMP.S _EXIT;
+
+.global _EVENT19
+_EVENT19:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT20
+_EVENT20:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EVENT21
+_EVENT21:
+	RAISE 14;
+	JUMP.S _EXIT;
+
+.global _EXIT
+_EXIT:
+	ASTAT = [sp++];
+	p1 = [sp++];
+	p0 = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	RTX;
+
+EVTABLE:
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x0000;
+	.byte2 0x003E;
+	.byte2 0x0042;
+	.byte4 0x0000;
+	.byte4 0x0000;
+	.byte4 0x0000;
+	.byte4 0x0000;
+	.byte4 0x0000;
+	.byte4 0x0000;
+	.byte4 0x0000;
+	.byte2 0x0000;
+	.byte2 0x001E;
+	.byte2 0x0022;
+	.byte2 0x0032;
+	.byte2 0x002e;
+	.byte2 0x0002;
+	.byte2 0x0036;
+	.byte2 0x002A;
+	.byte2 0x001A;
+	.byte2 0x0016;
+	.byte2 0x000A;
+	.byte2 0x000E;
+	.byte2 0x0012;
+	.byte2 0x0006;
+	.byte2 0x0026;
+
+.global evt_rst
+evt_rst:
+	SAVE_CONTEXT
+	r0 = IRQ_RST;
+	r1 = RETN;
+	sp += -12;
+	call do_reset;
+	sp += 12;
+
+_evt_rst_exit:
+	rtn;
+
+irq_panic:
+	r0 = IRQ_EVX;
+	r1 =  sp;
+	sp += -12;
+	call blackfin_irq_panic;
+	sp += 12;
+
+.global evt_ivhw
+evt_ivhw:
+	SAVE_CONTEXT
+	RAISE 14;
+
+_evt_ivhw_exit:
+	 rti;
+
+.global evt_timer
+evt_timer:
+	SAVE_CONTEXT
+	r0 = IRQ_CORETMR;
+	sp += -12;
+	/* Polling method used now. */
+	/* call timer_int; */
+	sp += 12;
+	RESTORE_CONTEXT
+	rti;
+	nop;
+
+.global evt_evt7
+evt_evt7:
+	SAVE_CONTEXT
+	r0 = 7;
+	sp += -12;
+	call process_int;
+	sp += 12;
+
+evt_evt7_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global evt_evt8
+evt_evt8:
+	SAVE_CONTEXT
+	r0 = 8;
+	sp += -12;
+	call process_int;
+	sp += 12;
+
+evt_evt8_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global evt_evt9
+evt_evt9:
+	SAVE_CONTEXT
+	r0 = 9;
+	sp += -12;
+	call process_int;
+	sp += 12;
+
+evt_evt9_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global evt_evt10
+evt_evt10:
+	SAVE_CONTEXT
+	r0 = 10;
+	sp += -12;
+	call process_int;
+	sp += 12;
+
+evt_evt10_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global evt_evt11
+evt_evt11:
+	SAVE_CONTEXT
+	r0 = 11;
+	sp += -12;
+	call process_int;
+	sp += 12;
+
+evt_evt11_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global evt_evt12
+evt_evt12:
+	SAVE_CONTEXT
+	r0 = 12;
+	sp += -12;
+	call process_int;
+	sp += 12;
+evt_evt12_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global evt_evt13
+evt_evt13:
+	SAVE_CONTEXT
+	r0 = 13;
+	sp += -12;
+	call process_int;
+	sp += 12;
+
+evt_evt13_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global evt_system_call
+evt_system_call:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call display_excp;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_system_call_exit:
+	rti;
+
+.global evt_soft_int1
+evt_soft_int1:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call display_excp;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_soft_int1_exit:
+	rti;
diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c
new file mode 100644
index 0000000000..df1a25ec75
--- /dev/null
+++ b/cpu/bf533/interrupts.c
@@ -0,0 +1,165 @@
+/*
+ * U-boot - interrupts.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on interrupts.c
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/cpu/defBF533.h>
+#include "cpu.h"
+
+static ulong timestamp;
+static ulong last_time;
+static int int_flag;
+
+int irq_flags; /* needed by asm-blackfin/system.h */
+
+/* Functions just to satisfy the linker */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On BF533 it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On BF533 it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return tbclk;
+}
+
+void enable_interrupts(void)
+{
+	restore_flags(int_flag);
+}
+
+int disable_interrupts(void)
+{
+	save_and_cli(int_flag);
+	return 1;
+}
+
+int interrupt_init(void)
+{
+	return (0);
+}
+
+void udelay(unsigned long usec)
+{
+	unsigned long delay, start, stop;
+	unsigned long cclk;
+	cclk = (CONFIG_CCLK_HZ);
+
+	while ( usec > 1 ) {
+	       /*
+		* how many clock ticks to delay?
+		*  - request(in useconds) * clock_ticks(Hz) / useconds/second
+		*/
+		if (usec < 1000) {
+			delay = (usec * (cclk/244)) >> 12 ;
+			usec = 0;
+		} else {
+			delay = (1000 * (cclk/244)) >> 12 ;
+			usec -= 1000;
+		}
+
+		asm volatile (" %0 = CYCLES;": "=g"(start));
+		do {
+			asm volatile (" %0 = CYCLES; ": "=g"(stop));
+		} while (stop - start < delay);
+	}
+
+	return;
+}
+
+void timer_init(void)
+{
+	*pTCNTL = 0x1;
+	*pTSCALE = 0x0;
+	*pTCOUNT  = MAX_TIM_LOAD;
+	*pTPERIOD = MAX_TIM_LOAD;
+	*pTCNTL = 0x7;
+	asm("CSYNC;");
+
+	timestamp = 0;
+	last_time = 0;
+}
+
+/* Any network command or flash
+ * command is started get_timer shall
+ * be called before TCOUNT gets reset,
+ * to implement the accurate timeouts.
+ *
+ * How ever milliconds doesn't return
+ * the number that has been elapsed from
+ * the last reset.
+ *
+ *  As get_timer is used in the u-boot
+ *  only for timeouts this should be
+ *  sufficient
+ */
+ulong get_timer(ulong base)
+{
+	ulong milisec;
+
+	/* Number of clocks elapsed */
+	ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
+
+	/* Find if the TCOUNT is reset
+	timestamp gives the number of times
+	TCOUNT got reset */
+	if(clocks < last_time)
+		timestamp++;
+	last_time = clocks;
+
+	/* Get the number of milliseconds */
+	milisec = clocks/(CONFIG_CCLK_HZ / 1000);
+
+	/* Find the number of millisonds
+	that got elapsed before this TCOUNT
+	cycle */
+	milisec += timestamp * (MAX_TIM_LOAD/(CONFIG_CCLK_HZ / 1000));
+
+	return (milisec - base);
+}
diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c
new file mode 100644
index 0000000000..859f4b2f09
--- /dev/null
+++ b/cpu/bf533/ints.c
@@ -0,0 +1,107 @@
+/*
+ * U-boot - ints.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on ints.c
+ *
+ * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin
+ *             drivers
+ *
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/stddef.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+void blackfin_irq_panic(int reason, struct pt_regs *regs)
+{
+	printf("\n\nException: IRQ 0x%x entered\n", reason);
+	printf("code=[0x%x], ", (unsigned int) (regs->seqstat & 0x3f));
+	printf("stack frame=0x%x, ", (unsigned int) regs);
+	printf("bad PC=0x%04x\n", (unsigned int) regs->pc);
+	dump(regs);
+	printf("Unhandled IRQ or exceptions!\n");
+	printf("Please reset the board \n");
+}
+
+void blackfin_init_IRQ(void)
+{
+	*(unsigned volatile long *) (SIC_IMASK) = SIC_UNMASK_ALL;
+	cli();
+#ifndef CONFIG_KGDB
+	*(unsigned volatile long *) (EVT_EMULATION_ADDR) = 0x0;
+#endif
+	*(unsigned volatile long *) (EVT_NMI_ADDR) =
+		(unsigned volatile long) evt_nmi;
+	*(unsigned volatile long *) (EVT_EXCEPTION_ADDR) =
+		(unsigned volatile long) trap;
+	*(unsigned volatile long *) (EVT_HARDWARE_ERROR_ADDR) =
+		(unsigned volatile long) evt_ivhw;
+	*(unsigned volatile long *) (EVT_RESET_ADDR) =
+		(unsigned volatile long) evt_rst;
+	*(unsigned volatile long *) (EVT_TIMER_ADDR) =
+		(unsigned volatile long) evt_timer;
+	*(unsigned volatile long *) (EVT_IVG7_ADDR) =
+		(unsigned volatile long) evt_evt7;
+	*(unsigned volatile long *) (EVT_IVG8_ADDR) =
+		(unsigned volatile long) evt_evt8;
+	*(unsigned volatile long *) (EVT_IVG9_ADDR) =
+		(unsigned volatile long) evt_evt9;
+	*(unsigned volatile long *) (EVT_IVG10_ADDR) =
+		(unsigned volatile long) evt_evt10;
+	*(unsigned volatile long *) (EVT_IVG11_ADDR) =
+		(unsigned volatile long) evt_evt11;
+	*(unsigned volatile long *) (EVT_IVG12_ADDR) =
+		(unsigned volatile long) evt_evt12;
+	*(unsigned volatile long *) (EVT_IVG13_ADDR) =
+		(unsigned volatile long) evt_evt13;
+	*(unsigned volatile long *) (EVT_IVG14_ADDR) =
+		(unsigned volatile long) evt_system_call;
+	*(unsigned volatile long *) (EVT_IVG15_ADDR) =
+		(unsigned volatile long) evt_soft_int1;
+	*(volatile unsigned long *) ILAT = 0;
+	asm("csync;");
+	sti();
+	*(volatile unsigned long *) IMASK = 0xffbf;
+	asm("csync;");
+}
+
+void display_excp(void)
+{
+	printf("Exception!\n");
+}
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
new file mode 100644
index 0000000000..84ae9d9cde
--- /dev/null
+++ b/cpu/bf533/serial.c
@@ -0,0 +1,194 @@
+/*
+ * U-boot - serial.c Serial driver for BF533
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
+ * Copyright (c) 2003	Bas Vermeulen <bas@buyways.nl>,
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on blkfinserial.c
+ * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
+ * Copyright(c) 2003	Metrowerks	<mwaddel@metrowerks.com>
+ * Copyright(c)	2001	Tony Z. Kou	<tonyko@arcturusnetworks.com>
+ * Copyright(c)	2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328 version serial driver imlpementation which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include "bf533_serial.h"
+
+unsigned long pll_div_fact;
+
+void calc_baud(void)
+{
+	unsigned char i;
+	int	temp;
+
+	for(i = 0; i < sizeof(baud_table)/sizeof(int); i++) {
+		temp =  CONFIG_SCLK_HZ/(baud_table[i]*8);
+		if ( temp && 0x1 == 1 ) {
+			temp++;
+		}
+		temp = temp/2;
+		hw_baud_table[i].dl_high = (temp >> 8)& 0xFF;
+		hw_baud_table[i].dl_low = (temp) & 0xFF;
+	}
+}
+
+void serial_setbrg(void)
+{
+	int i;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	calc_baud();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		if (gd->baudrate == baud_table[i])
+			break;
+	}
+
+	/* Enable UART */
+	*pUART_GCTL |= UART_GCTL_UCEN;
+	asm("ssync;");
+
+	/* Set DLAB in LCR to Access DLL and DLH */
+	ACCESS_LATCH;
+	asm("ssync;");
+
+	*pUART_DLL = hw_baud_table[i].dl_low;
+	asm("ssync;");
+	*pUART_DLH = hw_baud_table[i].dl_high;
+	asm("ssync;");
+
+	/* Clear DLAB in LCR to Access THR RBR IER */
+	ACCESS_PORT_IER;
+	asm("ssync;");
+
+	/* Enable  ERBFI and ELSI interrupts
+	* to poll SIC_ISR register*/
+	*pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI;
+	asm("ssync;");
+
+	/* Set LCR to Word Lengh 8-bit word select */
+	*pUART_LCR = UART_LCR_WLS8;
+	asm("ssync;");
+
+	return;
+}
+
+int serial_init(void)
+{
+	serial_setbrg();
+	return (0);
+}
+
+void serial_putc(const char c)
+{
+	if ((*pUART_LSR) & UART_LSR_TEMT)
+	{
+		if (c == '\n')
+			serial_putc('\r');
+
+		local_put_char(c);
+	}
+
+	while (!((*pUART_LSR) & UART_LSR_TEMT))
+		SYNC_ALL;
+
+	return;
+}
+
+int serial_tstc(void)
+{
+	if (*pUART_LSR & UART_LSR_DR)
+		return 1;
+	else
+		return 0;
+}
+
+int serial_getc(void)
+{
+	unsigned short uart_lsr_val, uart_rbr_val;
+	unsigned long isr_val;
+	int ret;
+
+	/* Poll for RX Interrupt */
+	while (!((isr_val = *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT));
+	asm("csync;");
+
+	uart_lsr_val = *pUART_LSR;	/* Clear status bit */
+	uart_rbr_val = *pUART_RBR;	/* getc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		ret =  -1;
+	}
+	else
+	{
+		ret = uart_rbr_val & 0xff;
+	}
+
+	return ret;
+}
+
+void serial_puts(const char *s)
+{
+	while (*s) {
+		serial_putc(*s++);
+	}
+}
+
+static void local_put_char(char ch)
+{
+	int flags = 0;
+	unsigned long isr_val;
+
+	save_and_cli(flags);
+
+	/* Poll for TX Interruput */
+	while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT));
+	asm("csync;");
+
+	*pUART_THR = ch;			/* putc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		printf("?");
+	}
+
+	restore_flags(flags);
+
+	return ;
+}
diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S
new file mode 100644
index 0000000000..6d585751ab
--- /dev/null
+++ b/cpu/bf533/start.S
@@ -0,0 +1,435 @@
+/*
+ * U-boot - start.S Startup file of u-boot for BF533
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on head.S
+ * Copyright (c) 2003  Metrowerks/Motorola
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *                     Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Note: A change in this file subsequently requires a change in
+ *       board/$(board_name)/config.mk for a valid u-boot.bin
+ */
+
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <asm/blackfin.h>
+#include <config.h>
+#include <asm/mem_init.h>
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+.global _stext;
+.global __bss_start;
+.global start;
+.global _start;
+.global _rambase;
+.global _ramstart;
+.global _ramend;
+.global _bf533_data_dest;
+.global _bf533_data_size;
+.global edata;
+.global _initialize;
+.global _exit;
+.global flashdataend;
+
+.text
+_start:
+start:
+_stext:
+
+	R0 = 0x30;
+	SYSCFG = R0;
+	SSYNC;
+
+	/* As per HW reference manual DAG registers,
+	 * DATA and Address resgister shall be zero'd
+	 * in initialization, after a reset state
+	 */
+	r1 = 0;	/* Data registers zero'd */
+	r2 = 0;
+	r3 = 0;
+	r4 = 0;
+	r5 = 0;
+	r6 = 0;
+	r7 = 0;
+
+	p0 = 0; /* Address registers zero'd */
+	p1 = 0;
+	p2 = 0;
+	p3 = 0;
+	p4 = 0;
+	p5 = 0;
+
+	i0 = 0; /* DAG Registers zero'd */
+	i1 = 0;
+	i2 = 0;
+	i3 = 0;
+	m0 = 0;
+	m1 = 0;
+	m3 = 0;
+	m3 = 0;
+	l0 = 0;
+	l1 = 0;
+	l2 = 0;
+	l3 = 0;
+	b0 = 0;
+	b1 = 0;
+	b2 = 0;
+	b3 = 0;
+
+	/* Set loop counters to zero, to make sure that
+	 * hw loops are disabled.
+	 */
+	lc0 = 0;
+	lc1 = 0;
+
+	SSYNC;
+
+	/* Check soft reset status */
+	p0.h = SWRST >> 16;
+	p0.l = SWRST & 0xFFFF;
+	r0.l = w[p0];
+
+	cc = bittst(r0, 15);
+	if !cc jump no_soft_reset;
+
+	/* Clear Soft reset */
+	r0 = 0x0000;
+	w[p0] = r0;
+	ssync;
+
+no_soft_reset:
+	nop;
+
+	/* Clear EVT registers */
+	p0.h = (EVT_EMULATION_ADDR >> 16);
+	p0.l = (EVT_EMULATION_ADDR & 0xFFFF);
+	p0 += 8;
+	p1 = 14;
+	r1 = 0;
+	LSETUP(4,4) lc0 = p1;
+	[ p0 ++ ] = r1;
+
+	/*
+	 *  Set PLL_CTL
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT;	/* Load the VCO multiplier */
+	r0 = r0 << 9;		/* Shift it over */
+	r1 =  CONFIG_CLKIN_HALF;	/* Do we need to divide CLKIN by 2? */
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;	/* Bypass the PLL?                 */
+	r1 = r1 << 8;	/* Shift it over */
+	r0 = r1 | r0;	/* add them all together */
+
+	p0.h = (PLL_CTL >> 16);
+	p0.l = (PLL_CTL & 0xFFFF);	/* Load the address */
+	cli r2;				/* Disable interrupts */
+	w[p0] = r0;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+	ssync;
+
+	/*
+	 * Turn on the CYCLES COUNTER
+	 */
+	r2 = SYSCFG;
+	BITSET (r2,1);
+	SYSCFG = r2;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV;
+	p0.h = (PLL_DIV >> 16);
+	p0.l = (PLL_DIV & 0xFFFF);
+	w[p0] = r0;
+	ssync;
+
+wait_for_pll_stab:
+	p0.h = (PLL_STAT >> 16);
+	p0.l = (PLL_STAT & 0xFFFF);
+	r0.l = w[p0];
+	cc = bittst(r0,5);
+	if !cc jump wait_for_pll_stab;
+
+	/* Configure SDRAM if SDRAM is already not enabled */
+	p0.l = (EBIU_SDSTAT & 0xFFFF);
+	p0.h = (EBIU_SDSTAT >> 16);
+	r0.l = w[p0];
+	cc = bittst(r0, 3);
+	if !cc jump skip_sdram_enable;
+
+	/* SDRAM initialization */
+	p0.l = (EBIU_SDGCTL & 0xFFFF);
+	p0.h = (EBIU_SDGCTL >> 16);	/* SDRAM Memory Global Control Register */
+	r0.h = (mem_SDGCTL >> 16);
+	r0.l = (mem_SDGCTL & 0xFFFF);
+	[p0] = r0;
+	ssync;
+
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);	/* SDRAM Memory Bank Control Register */
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	p0.l = (EBIU_SDRRC & 0xFFFF);
+	p0.h = (EBIU_SDRRC >> 16);	/* SDRAM Refresh Rate Control Register */
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+skip_sdram_enable:
+	nop;
+
+#ifndef	CFG_NO_FLASH
+	/* relocate into to RAM */
+	p1.l = (CFG_FLASH_BASE & 0xffff);
+	p1.h = (CFG_FLASH_BASE >> 16);
+	p2.l = (CFG_MONITOR_BASE & 0xffff);
+	p2.h = (CFG_MONITOR_BASE >> 16);
+	r0.l = (CFG_MONITOR_LEN & 0xffff);
+	r0.h = (CFG_MONITOR_LEN >> 16);
+loop1:
+	r1 = [p1];
+	[p2] = r1;
+	p3=0x4;
+	p1=p1+p3;
+	p2=p2+p3;
+	r2=0x4;
+	r0=r0-r2;
+	cc=r0==0x0;
+	if !cc jump loop1;
+#endif
+	/*
+	 * configure STACK
+	 */
+	r0.h = (CONFIG_STACKBASE >> 16);
+	r0.l = (CONFIG_STACKBASE & 0xFFFF);
+	sp = r0;
+	fp = sp;
+
+	/*
+	 * This next section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* To keep ourselves in the supervisor mode */
+	p0.l = (EVT_IVG15_ADDR & 0xFFFF);
+	p0.h = (EVT_IVG15_ADDR >> 16);
+
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+
+	p0.l = (IMASK & 0xFFFF);
+	p0.h = (IMASK >> 16);
+	r0 = IVG15_POS;
+	[p0] = r0;
+	raise 15;
+	p0.l = WAIT_HERE;
+	p0.h = WAIT_HERE;
+	reti = p0;
+	rti;
+
+WAIT_HERE:
+	jump WAIT_HERE;
+
+.global _real_start;
+_real_start:
+	[ -- sp ] = reti;
+
+#ifdef CONFIG_EZKIT533
+	p0.l = (WDOG_CTL & 0xFFFF);
+	p0.h = (WDOG_CTL >> 16);
+	r0 = WATCHDOG_DISABLE(z);
+	w[p0] = r0;
+#endif
+
+	/* Code for initializing Async mem banks */
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/* DMA reset code to Hi of L1 SRAM */
+copy:
+	P1.H = hi(SYSMMR_BASE);	/* P1 Points to the beginning of SYSTEM MMR Space */
+	P1.L = lo(SYSMMR_BASE);
+
+	R0.H = reset_start;	/* Source Address (high) */
+	R0.L = reset_start;	/* Source Address (low) */
+	R1.H = reset_end;
+	R1.L = reset_end;
+	R2 = R1 - R0;		/* Count */
+	R1.H = hi(L1_ISRAM);	/* Destination Address (high) */
+	R1.L = lo(L1_ISRAM);	/* Destination Address (low) */
+	R3.L = DMAEN;		/* Source DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
+
+DMA:
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
+
+	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
+	/* Set Source  DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+	IDLE;	/* Wait for DMA to Complete */
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
+
+	/* DMA reset code to DATA BANK A which uses this port
+	 * to avoid following problem
+	 * " Data from a Data Cache fill can be corrupoted after or during
+	 *   instruction DMA if certain core stalls exist"
+	 */
+
+copy_as_data:
+	R0.H = reset_start;	/* Source Address (high) */
+	R0.L = reset_start;	/* Source Address (low) */
+	R1.H = reset_end;
+	R1.L = reset_end;
+	R2 = R1 - R0;	/* Count */
+	R1.H = hi(DATA_BANKA_SRAM);	/* Destination Address (high) */
+	R1.L = lo(DATA_BANKA_SRAM);	/* Destination Address (low) */
+	R3.L = DMAEN;	/* Source DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
+
+DMA_DATA:
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
+
+ 	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
+	/* Set Source      DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+	IDLE;	/* Wait for DMA to Complete */
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
+
+copy_end: nop;
+
+	/* Initialize BSS Section with 0 s */
+	p1.l = __bss_start;
+	p1.h = __bss_start;
+	p2.l = _end;
+	p2.h = _end;
+	r1 = p1;
+	r2 = p2;
+	r3 = r2 - r1;
+	r3 = r3 >> 2;
+	p3 = r3;
+	lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
+	CC = p2<=p1;
+	if CC jump _clear_bss_skip;
+	r0 = 0;
+_clear_bss:
+_clear_bss_end:
+ 	[p1++] = r0;
+_clear_bss_skip:
+
+	p0.l = _start1;
+	p0.h = _start1;
+	jump (p0);
+
+reset_start:
+	p0.h = WDOG_CNT >> 16;
+	p0.l = WDOG_CNT & 0xffff;
+	r0 = 0x0010;
+	w[p0] = r0;
+	p0.h = WDOG_CTL >> 16;
+	p0.l = WDOG_CTL & 0xffff;
+	r0 = 0x0000;
+	w[p0] = r0;
+reset_wait:
+	jump reset_wait;
+
+reset_end: nop;
+
+_exit:
+	jump.s	_exit;
diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S
new file mode 100644
index 0000000000..6f48124055
--- /dev/null
+++ b/cpu/bf533/start1.S
@@ -0,0 +1,38 @@
+/*
+ * U-boot - start1.S Code running out of RAM after relocation
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define ASSEMBLY
+#include <linux/config.h>
+#include <asm/blackfin.h>
+#include <config.h>
+
+.global	start1;
+.global	_start1;
+
+.text
+_start1:
+start1:
+	sp += -12;
+	call	board_init_f;
+	sp += 12;
diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c
new file mode 100644
index 0000000000..37470d583e
--- /dev/null
+++ b/cpu/bf533/traps.c
@@ -0,0 +1,73 @@
+/*
+ * U-boot - traps.c Routines related to interrupts and exceptions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * No original Copyright holder listed,
+ * Probabily original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 2003 Metrowerks - for Blackfin
+ * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/errno.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/page.h>
+#include <asm/machdep.h>
+#include "cpu.h"
+
+void init_IRQ(void)
+{
+	blackfin_init_IRQ();
+	return;
+}
+
+void process_int(unsigned long vec, struct pt_regs *fp)
+{
+	return;
+}
+
+void dump(struct pt_regs *fp)
+{
+	printf("PC: %08lx\n", fp->pc);
+	printf("SEQSTAT: %08lx    SP: %08lx\n", (long) fp->seqstat,
+		(long) fp);
+	printf("R0: %08lx    R1: %08lx    R2: %08lx    R3: %08lx\n",
+		fp->r0, fp->r1, fp->r2, fp->r3);
+	printf("R4: %08lx    R5: %08lx    R6: %08lx    R7: %08lx\n",
+		fp->r4, fp->r5, fp->r6, fp->r7);
+	printf("P0: %08lx    P1: %08lx    P2: %08lx    P3: %08lx\n",
+		fp->p0, fp->p1, fp->p2, fp->p3);
+	printf("P4: %08lx    P5: %08lx    FP: %08lx\n", fp->p4, fp->p5,
+		fp->fp);
+	printf("A0.w: %08lx    A0.x: %08lx    A1.w: %08lx    A1.x: %08lx\n",
+		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+	printf("\n");
+}
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index 9ce9b35397..078e8328b6 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -224,10 +224,14 @@ static void au1x00_halt(struct eth_device* dev){
 int au1x00_enet_initialize(bd_t *bis){
 	struct eth_device* dev;
 
-	dev = (struct eth_device*) malloc(sizeof *dev);
+	if ((dev = (struct eth_device*)malloc(sizeof *dev)) == NULL) {
+		puts ("malloc failed\n");
+		return 0;
+	}
+
 	memset(dev, 0, sizeof *dev);
 
-	sprintf(dev->name, "Au1X00 ETHERNET");
+	sprintf(dev->name, "Au1X00 ethernet");
 	dev->iobase = 0;
 	dev->priv   = 0;
 	dev->init   = au1x00_init;
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 86c8ce6879..2e8e54958f 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -880,8 +880,9 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 	fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
 #if defined(CONFIG_CANMB)   || defined(CONFIG_HMI1001)	|| \
     defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0)	|| \
+    defined(CONFIG_MCC200)  || defined(CONFIG_O2DNT)	|| \
     defined(CONFIG_PM520)   || defined(CONFIG_TOP5200)	|| \
-    defined(CONFIG_TQM5200) || defined(CONFIG_O2DNT)
+    defined(CONFIG_TQM5200)
 # ifndef CONFIG_FEC_10MBIT
 	fec->xcv_type = MII100;
 # else
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index a761a178bc..99afe7609f 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -163,7 +163,7 @@ int prt_8260_clks (void)
 
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	ulong sccr, dfbrg;
-	ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf;
+	ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
 	corecnf_t *cp;
 
 	sccr = immap->im_clkrst.car_sccr;
@@ -175,6 +175,7 @@ int prt_8260_clks (void)
 	cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
 	plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
 	pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+	pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
 
 	cp = &corecnf_tab[corecnf];
 
@@ -204,8 +205,9 @@ int prt_8260_clks (void)
 			cp->vco_div, cp->freq_60x, cp->freq_core);
 
 	printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, "
-			"plldf %ld, pllmf %ld\n", dfbrg, corecnf, busdf, cpmdf, plldf,
-			pllmf);
+		"plldf %ld, pllmf %ld, pcidf %ld\n",
+			dfbrg, corecnf, busdf, cpmdf,
+			plldf, pllmf, pcidf);
 
 	printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
 			gd->vco_out, gd->scc_clk, gd->brg_clk);
@@ -215,9 +217,20 @@ int prt_8260_clks (void)
 
 	if (sccr & SCCR_PCI_MODE) {
 		uint pci_div;
-
-		pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
-			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+		uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
+
+		if (sccr & SCCR_PCI_MODCK) {
+			pci_div = 2;
+			if (pcidf == 9) {
+				pci_div *= 5;
+			} else if (pcidf == 0xB) {
+				pci_div *= 6;
+			} else {
+				pci_div *= (pcidf + 1);
+			}
+		} else {
+			pci_div = pcidf + 1;
+		}
 
 		printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div);
 	}
@@ -225,5 +238,3 @@ int prt_8260_clks (void)
 
 	return (0);
 }
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index e49e4fe0ee..f24d3a4b1c 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -93,6 +93,8 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	/* enable Reset Control Reg */
 	immap->reset.rpr = 0x52535445;
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
 
 	/* confirm Reset Control Reg is enabled */
 	while(!((immap->reset.rcer) & RCER_CRE));
@@ -189,3 +191,88 @@ ft_cpu_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
+
+#if defined(CONFIG_DDR_ECC)
+void dma_init(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile dma8349_t *dma = &immap->dma;
+	volatile u32 status = swab32(dma->dmasr0);
+	volatile u32 dmamr0 = swab32(dma->dmamr0);
+
+	debug("DMA-init\n");
+
+	/* initialize DMASARn, DMADAR and DMAABCRn */
+	dma->dmadar0 = (u32)0;
+	dma->dmasar0 = (u32)0;
+	dma->dmabcr0 = 0;
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* clear CS bit */
+	dmamr0 &= ~DMA_CHANNEL_START;
+	dma->dmamr0 = swab32(dmamr0);
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* while the channel is busy, spin */
+	while(status & DMA_CHANNEL_BUSY) {
+		status = swab32(dma->dmasr0);
+	}
+
+	debug("DMA-init end\n");
+}
+
+uint dma_check(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile dma8349_t *dma = &immap->dma;
+	volatile u32 status = swab32(dma->dmasr0);
+	volatile u32 byte_count = swab32(dma->dmabcr0);
+
+	/* while the channel is busy, spin */
+	while (status & DMA_CHANNEL_BUSY) {
+		status = swab32(dma->dmasr0);
+	}
+
+	if (status & DMA_CHANNEL_TRANSFER_ERROR) {
+		printf ("DMA Error: status = %x @ %d\n", status, byte_count);
+	}
+
+	return status;
+}
+
+int dma_xfer(void *dest, u32 count, void *src)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile dma8349_t *dma = &immap->dma;
+	volatile u32 dmamr0;
+
+	/* initialize DMASARn, DMADAR and DMAABCRn */
+	dma->dmadar0 = swab32((u32)dest);
+	dma->dmasar0 = swab32((u32)src);
+	dma->dmabcr0 = swab32(count);
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* init direct transfer, clear CS bit */
+	dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT |
+			DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B |
+			DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN);
+	
+	dma->dmamr0 = swab32(dmamr0);
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* set CS to start DMA transfer */
+	dmamr0 |= DMA_CHANNEL_START;
+	dma->dmamr0 = swab32(dmamr0);
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	return ((int)dma_check());
+}
+#endif /*CONFIG_DDR_ECC*/
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 63dcd664be..b4012a8ddf 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * 
  * Copyright 2004 Freescale Semiconductor.
  * (C) Copyright 2003 Motorola Inc.
  * Xianghua Xiao (X.Xiao@motorola.com)
@@ -63,13 +66,42 @@ picos_to_clk(int picos)
 	return clks;
 }
 
-unsigned int
-banksize(unsigned char row_dens)
+unsigned int banksize(unsigned char row_dens)
 {
 	return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
 }
 
-long int spd_sdram(int(read_spd)(uint addr))
+int read_spd(uint addr)
+{
+	return ((int) addr);
+}
+
+#undef SPD_DEBUG
+#ifdef SPD_DEBUG
+static void spd_debug(spd_eeprom_t *spd)
+{
+	printf ("\nDIMM type:       %-18.18s\n", spd->mpart);
+	printf ("SPD size:        %d\n", spd->info_size);
+	printf ("EEPROM size:     %d\n", 1 << spd->chip_size);
+	printf ("Memory type:     %d\n", spd->mem_type);
+	printf ("Row addr:        %d\n", spd->nrow_addr);
+	printf ("Column addr:     %d\n", spd->ncol_addr);
+	printf ("# of rows:       %d\n", spd->nrows);
+	printf ("Row density:     %d\n", spd->row_dens);
+	printf ("# of banks:      %d\n", spd->nbanks);
+	printf ("Data width:      %d\n",
+			256 * spd->dataw_msb + spd->dataw_lsb);
+	printf ("Chip width:      %d\n", spd->primw);
+	printf ("Refresh rate:    %02X\n", spd->refresh);
+	printf ("CAS latencies:   %02X\n", spd->cas_lat);
+	printf ("Write latencies: %02X\n", spd->write_lat);
+	printf ("tRP:             %d\n", spd->trp);
+	printf ("tRCD:            %d\n", spd->trcd);
+	printf ("\n");
+}
+#endif /* SPD_DEBUG */
+
+long int spd_sdram()
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
 	volatile ddr8349_t *ddr = &immap->ddr;
@@ -81,10 +113,10 @@ long int spd_sdram(int(read_spd)(uint addr))
 	unsigned char caslat;
 	unsigned int trfc, trfc_clk, trfc_low;
 
-#warning Current spd_sdram does not fit its usage... adjust implementation or API...
-
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-
+#ifdef SPD_DEBUG
+	spd_debug(&spd);
+#endif
 	if (spd.nrows > 2) {
 		puts("DDR:Only two chip selects are supported on ADS.\n");
 		return 0;
@@ -219,25 +251,31 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 * Only DDR I is supported
 	 * DDR I and II have different mode-register-set definition
 	 */
-
-	/* burst length is always 4 */
 	switch(caslat) {
 	case 2:
-		ddr->sdram_mode = 0x52; /* 1.5 */
+		tmp = 0x50; /* 1.5 */
 		break;
 	case 3:
-		ddr->sdram_mode = 0x22; /* 2.0 */
+		tmp = 0x20; /* 2.0 */
 		break;
 	case 4:
-		ddr->sdram_mode = 0x62; /* 2.5 */
+		tmp = 0x60; /* 2.5 */
 		break;
 	case 5:
-		ddr->sdram_mode = 0x32; /* 3.0 */
+		tmp = 0x30; /* 3.0 */
 		break;
 	default:
 		puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
 		return 0;
 	}
+#if defined (CONFIG_DDR_32BIT)
+	/* set burst length to 8 for 32-bit data path */
+	tmp |= 0x03;
+#else
+	/* set burst length to 4 - default for 64-bit data path */
+	tmp |= 0x02;
+#endif
+	ddr->sdram_mode = tmp;
 	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
 
 	switch(spd.refresh) {
@@ -282,8 +320,13 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 */
 #if defined(CONFIG_DDR_ECC)
 	if (spd.config == 0x02) {
-		ddr->err_disable = 0x0000000d;
-		ddr->err_sbe = 0x00ff0000;
+		/* disable error detection */
+		ddr->err_disable = ~ECC_ERROR_ENABLE;
+
+		/* set single bit error threshold to maximum value,
+		 * reset counter to zero */
+		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+			(0 << ECC_ERROR_MAN_SBEC_SHIFT);
 	}
 	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
 	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
@@ -297,7 +340,8 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
 	 * clock cycle after address/command
 	 */
-	ddr->sdram_clk_cntl = 0x82000000;
+	/*ddr->sdram_clk_cntl = 0x82000000;*/
+	ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05);
 
 	/*
 	 * Figure out the settings for the sdram_cfg register.  Build up
@@ -311,6 +355,10 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 */
 	tmp = 0xc2000000;
 
+#if defined (CONFIG_DDR_32BIT)
+	/* in 32-Bit mode burst len is 8 beats */
+	tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+#endif
 	/*
 	 * sdram_cfg[3] = RD_EN - registered DIMM enable
 	 *   A value of 0x26 indicates micron registered DIMMS (micron.com)
@@ -324,7 +372,7 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 * If the user wanted ECC (enabled via sdram_cfg[2])
 	 */
 	if (spd.config == 0x02) {
-		tmp |= 0x20000000;
+		tmp |= SDRAM_CFG_ECC_EN;
 	}
 #endif
 
@@ -340,37 +388,94 @@ long int spd_sdram(int(read_spd)(uint addr))
 	udelay(500);
 
 	debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
-
-	return memsize;/*in MBytes*/
+	return memsize; /*in MBytes*/
 }
 #endif /* CONFIG_SPD_EEPROM */
 
 
 #if defined(CONFIG_DDR_ECC)
 /*
- * Initialize all of memory for ECC, then enable errors.
+ * Use timebase counter, get_timer() is not availabe
+ * at this point of initialization yet.
  */
+static __inline__ unsigned long get_tbms (void)
+{
+	unsigned long tbl;
+	unsigned long tbu1, tbu2;
+	unsigned long ms;
+	unsigned long long tmp;
+
+	ulong tbclk = get_tbclk();
+
+	/* get the timebase ticks */
+	do {
+		asm volatile ("mftbu %0":"=r" (tbu1):);
+		asm volatile ("mftb %0":"=r" (tbl):);
+		asm volatile ("mftbu %0":"=r" (tbu2):);
+	} while (tbu1 != tbu2);
+
+	/* convert ticks to ms */
+	tmp = (unsigned long long)(tbu1);
+	tmp = (tmp << 32);
+	tmp += (unsigned long long)(tbl);
+	ms = tmp/(tbclk/1000);
+
+	return ms;
+}
 
-void
-ddr_enable_ecc(unsigned int dram_size)
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+//#define CONFIG_DDR_ECC_INIT_VIA_DMA
+void ddr_enable_ecc(unsigned int dram_size)
 {
-#ifndef FIXME
-	uint *p = 0;
-	uint i = 0;
+	uint *p;
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	volatile ddr8349_t *ddr = &immap->ddr;
+	unsigned long t_start, t_end;
+#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+	uint i;
+#endif
+
+	debug("Initialize a Cachline in DRAM\n");
+	icache_enable();
 
+#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+	/* Initialise DMA for direct Transfers */
 	dma_init();
+#endif
+
+	t_start = get_tbms();
 
-	for (*p = 0; p < (uint *)(8 * 1024); p++) {
+#if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+	debug("DDR init: Cache flush method\n");
+	for (p = 0; p < (uint *)(dram_size); p++) {
 		if (((unsigned int)p & 0x1f) == 0) {
 			ppcDcbz((unsigned long) p);
 		}
+
+		/* write pattern to cache and flush */
 		*p = (unsigned int)0xdeadbeef;
+
 		if (((unsigned int)p & 0x1c) == 0x1c) {
 			ppcDcbf((unsigned long) p);
 		}
 	}
+#else
+	printf("DDR init: DMA method\n");
+	for (p = 0; p < (uint *)(8 * 1024); p++) {
+		/* zero one data cache line */
+		if (((unsigned int)p & 0x1f) == 0) {
+			ppcDcbz((unsigned long)p);
+		}
+
+		/* write pattern to it and flush */
+		*p = (unsigned int)0xdeadbeef;
+
+		if (((unsigned int)p & 0x1c) == 0x1c) {
+			ppcDcbf((unsigned long)p);
+		}
+	}
 
 	/* 8K */
 	dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
@@ -396,13 +501,31 @@ ddr_enable_ecc(unsigned int dram_size)
 	for (i = 1; i < dram_size / 0x800000; i++) {
 		dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
 	}
-
-	/*
-	 * Enable errors for ECC.
-	 */
-	ddr->err_disable = 0x00000000;
-	asm("sync;isync");
 #endif
-}
 
+	t_end = get_tbms();
+	icache_disable();
+
+	debug("\nREADY!!\n");
+	debug("ddr init duration: %ld ms\n", t_end - t_start);
+
+	/* Clear All ECC Errors */
+	if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
+		ddr->err_detect |= ECC_ERROR_DETECT_MME;
+	if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
+		ddr->err_detect |= ECC_ERROR_DETECT_MBE;
+	if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
+		ddr->err_detect |= ECC_ERROR_DETECT_SBE;
+	if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
+		ddr->err_detect |= ECC_ERROR_DETECT_MSE;
+
+	/* Disable ECC-Interrupts */
+	ddr->err_int_en &= ECC_ERR_INT_DISABLE;
+
+	/* Enable errors for ECC */
+	ddr->err_disable &= ECC_ERROR_ENABLE;
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+}
 #endif	/* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 46c748f790..6e02cce799 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -796,7 +796,7 @@ icache_disable:
 	.globl	icache_status
 icache_status:
 	mfspr	r3, HID0
-	rlwinm	r3, r3, HID0_ICE_SHIFT, 31, 31
+	rlwinm	r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
 	blr
 
 	.globl	dcache_enable
@@ -828,7 +828,7 @@ dcache_disable:
 	.globl	dcache_status
 dcache_status:
 	mfspr	r3, HID0
-	rlwinm	r3, r3, HID0_DCE_SHIFT, 31, 31
+	rlwinm	r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
 	blr
 
 	.globl get_pvr
@@ -836,6 +836,40 @@ get_pvr:
 	mfspr	r3, PVR
 	blr
 
+/*------------------------------------------------------------------------------- */
+/* Function:	 ppcDcbf */
+/* Description:	 Data Cache block flush */
+/* Input:	 r3 = effective address */
+/* Output:	 none. */
+/*------------------------------------------------------------------------------- */
+	.globl	ppcDcbf
+ppcDcbf:
+	dcbf	r0,r3
+	blr
+
+/*------------------------------------------------------------------------------- */
+/* Function:	 ppcDcbi */
+/* Description:	 Data Cache block Invalidate */
+/* Input:	 r3 = effective address */
+/* Output:	 none. */
+/*------------------------------------------------------------------------------- */
+	.globl	ppcDcbi
+ppcDcbi:
+	dcbi	r0,r3
+	blr
+
+/*--------------------------------------------------------------------------
+ * Function:	 ppcDcbz
+ * Description:	 Data Cache block zero.
+ * Input:	 r3 = effective address
+ * Output:	 none.
+ *-------------------------------------------------------------------------- */
+
+	.globl	ppcDcbz
+ppcDcbz:
+	dcbz	r0,r3
+	blr
+
 /*-------------------------------------------------------------------*/
 
 /*
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 7ac65736bc..f96a4c3f8b 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -715,7 +715,7 @@ icache_disable:
 	.globl	icache_status
 icache_status:
 	mfspr	r3,L1CSR1
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
+	andi.	r3,r3,1
 	blr
 
 	.globl	dcache_enable
@@ -748,7 +748,7 @@ dcache_disable:
 	.globl	dcache_status
 dcache_status:
 	mfspr	r3,L1CSR0
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
+	andi.	r3,r3,1
 	blr
 
 	.globl get_pir
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index 4a32986a2e..c4a0cba13a 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -69,14 +69,15 @@ static int check_CPU (long clock, uint pvr, uint immr)
 
 	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
 	m = 0;
+	suf = "";
 
 	/*
 	 * Some boards use sockets so different CPUs can be used.
 	 * We have to check chip version in run time.
 	 */
 	switch (k) {
-	case 0x00020001: pre = 'P'; suf = ""; break;
-	case 0x00030001: suf = ""; break;
+	case 0x00020001: pre = 'P'; break;
+	case 0x00030001: break;
 	case 0x00120003: suf = "A"; break;
 	case 0x00130003: suf = "A3"; break;
 
@@ -93,7 +94,11 @@ static int check_CPU (long clock, uint pvr, uint immr)
 		/* this value is not documented anywhere */
 	case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
 		/* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
-	case 0x08000003: pre = 'M'; suf = ""; m = 1;
+	case 0x08010004:		/* Rev. A.0 */
+		suf = "A";
+		/* fall through */
+	case 0x08000003:		/* Rev. 0.3 */
+		pre = 'M'; m = 1;
 		if (id_str == NULL)
 			id_str =
 # if defined(CONFIG_MPC852T)
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index f6b29e9d6e..947b85e28a 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -373,7 +373,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
 {
 	unsigned int cmdstat = 0;
 
-	pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io);
+	pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
 
 	/* always enable io space on vga boards */
 	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 48b430d14d..948de43d14 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -340,23 +340,6 @@ _start:
 	mtspr	tcr,r0			/* disable all */
 	mtspr	esr,r0			/* clear exception syndrome register */
 	mtxer	r0			/* clear integer exception register */
-#if !defined(CONFIG_440GX)
-	lis	r1,0x0002		/* set CE bit (Critical Exceptions) */
-	ori	r1,r1,0x1000		/* set ME bit (Machine Exceptions) */
-	mtmsr	r1			/* change MSR */
-#elif !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
-	bl	__440gx_msr_set
-	b	__440gx_msr_continue
-
-__440gx_msr_set:
-	lis	r1, 0x0002		/* set CE bit (Critical Exceptions) */
-	ori	r1,r1,0x1000	/* set ME bit (Machine Exceptions) */
-	mtspr	srr1,r1
-	mflr	r1
-	mtspr	srr0,r1
-	rfi
-__440gx_msr_continue:
-#endif
 
 	/*----------------------------------------------------------------*/
 	/* Debug setup -- some (not very good) ice's need an event*/
@@ -458,9 +441,6 @@ __440gx_msr_continue:
 	mtspr	esr,r0			/* clear Exception Syndrome Reg */
 	mttcr	r0			/* timer control register */
 	mtexier r0			/* disable all interrupts */
-	addi	r4,r0,0x1000		/* set ME bit (Machine Exceptions) */
-	oris	r4,r4,0x2		/* set CE bit (Critical Exceptions) */
-	mtmsr	r4			/* change MSR */
 	addis	r4,r0,0xFFFF		/* set r4 to 0xFFFFFFFF (status in the */
 	ori	r4,r4,0xFFFF		/* dbsr is cleared by setting bits to 1) */
 	mtdbsr	r4			/* clear/reset the dbsr */
@@ -571,9 +551,6 @@ __440gx_msr_continue:
 	mttcr	r4			/* clear Timer Control Reg */
 	mtxer	r4			/* clear Fixed-Point Exception Reg */
 	mtevpr	r4			/* clear Exception Vector Prefix Reg */
-	addi	r4,r0,0x1000		/* set ME bit (Machine Exceptions) */
-	oris	r4,r4,0x0002		/* set CE bit (Critical Exceptions) */
-	mtmsr	r4			/* change MSR */
 	addi	r4,r0,(0xFFFF-0x10000)		/* set r4 to 0xFFFFFFFF (status in the */
 					/* dbsr is cleared by setting bits to 1) */
 	mtdbsr	r4			/* clear/reset the dbsr */
@@ -1428,6 +1405,24 @@ trap_init:
 	cmplw	0, r7, r8
 	blt	4b
 
+#if !defined(CONFIG_440_GX)
+	addi	r7,r0,0x1000		/* set ME bit (Machine Exceptions) */
+	oris	r7,r7,0x0002		/* set CE bit (Critical Exceptions) */
+	mtmsr	r7			/* change MSR */
+#else
+	bl	__440gx_msr_set
+	b	__440gx_msr_continue
+
+__440gx_msr_set:
+	addi	r7,r0,0x1000		/* set ME bit (Machine Exceptions) */
+	oris	r7,r7,0x0002		/* set CE bit (Critical Exceptions) */
+	mtspr	srr1,r7
+	mflr	r7
+	mtspr	srr0,r7
+	rfi
+__440gx_msr_continue:
+#endif
+
 	mtlr	r4			/* restore link register	*/
 	blr
 
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index d1551ddc38..b33d674110 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -143,6 +143,7 @@ int dcache_status (void)
 	return 0;					/* always off */
 }
 
+#ifndef CONFIG_CPU_MONAHANS
 void set_GPIO_mode(int gpio_mode)
 {
 	int gpio = gpio_mode & GPIO_MD_MASK_NR;
@@ -160,3 +161,4 @@ void set_GPIO_mode(int gpio_mode)
 	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
 	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
 }
+#endif /* CONFIG_CPU_MONAHANS */
diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c
index cedebfe496..9bf2a7cf4f 100644
--- a/cpu/pxa/serial.c
+++ b/cpu/pxa/serial.c
@@ -54,7 +54,11 @@ void serial_setbrg (void)
 		hang ();
 
 #ifdef CONFIG_FFUART
+#ifdef CONFIG_CPU_MONAHANS
+	CKENA |= CKENA_22_FFUART;
+#else
 	CKEN |= CKEN6_FFUART;
+#endif /* CONFIG_CPU_MONAHANS */
 
 	FFIER = 0;					/* Disable for now */
 	FFFCR = 0;					/* No fifos enabled */
@@ -68,7 +72,11 @@ void serial_setbrg (void)
 	FFIER = IER_UUE;			/* Enable FFUART */
 
 #elif defined(CONFIG_BTUART)
+#ifdef CONFIG_CPU_MONAHANS
+	CKENA |= CKENA_21_BTUART;
+#else
 	CKEN |= CKEN7_BTUART;
+#endif /*  CONFIG_CPU_MONAHANS */
 
 	BTIER = 0;
 	BTFCR = 0;
@@ -82,7 +90,11 @@ void serial_setbrg (void)
 	BTIER = IER_UUE;			/* Enable BFUART */
 
 #elif defined(CONFIG_STUART)
+#ifdef CONFIG_CPU_MONAHANS
+	CKENA |= CKENA_23_STUART;
+#else
 	CKEN |= CKEN5_STUART;
+#endif /* CONFIG_CPU_MONAHANS */
 
 	STIER = 0;
 	STFCR = 0;
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index a8cc0800b0..9541c9b2b9 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -6,8 +6,8 @@
  *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
  *  Copyright (C) 2001	Alex Zuepke <azu@sysgo.de>
  *  Copyright (C) 2002	Kyle Harris <kharris@nexus-tech.net>
- *  Copyright (C) 2003  Robert Schwebel <r.schwebel@pengutronix.de>
- *  Copyright (C) 2003  Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
+ *  Copyright (C) 2003	Robert Schwebel <r.schwebel@pengutronix.de>
+ *  Copyright (C) 2003	Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -30,6 +30,7 @@
 
 #include <config.h>
 #include <version.h>
+#include <asm/arch/pxa-regs.h>
 
 .globl _start
 _start: b	reset
@@ -116,13 +117,13 @@ reset:
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
+	cmp	r0, r1			/* don't reloc during debug	    */
+	beq	stack_setup
 
 	ldr	r2, _armboot_start
 	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
+	sub	r2, r3, r2		/* r2 <- size of armboot	    */
+	add	r2, r0, r2		/* r2 <- source end address	    */
 
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
@@ -134,19 +135,19 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 
 clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov 	r2, #0x00000000		/* clear                            */
+	ldr	r0, _bss_start		/* find start of bss segment	    */
+	ldr	r1, _bss_end		/* stop here			    */
+	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...                    */
+clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	r0, r0, #4
 	cmp	r0, r1
 	ble	clbss_l
@@ -164,8 +165,16 @@ _start_armboot: .word start_armboot
 /* - setup memory timing						    */
 /*									    */
 /****************************************************************************/
+/* mk@tbd: Fix this! */
+#ifdef CONFIG_CPU_MONAHANS
+#undef ICMR
+#undef OSMR3
+#undef OSCR
+#undef OWER
+#undef OIER
+#endif
 
-/* Interrupt-Controller base address				            */
+/* Interrupt-Controller base address					    */
 IC_BASE:	   .word	   0x40d00000
 #define ICMR	0x04
 
@@ -180,7 +189,7 @@ OSTIMER_BASE:	.word	0x40a00000
 #define OWER	0x18
 #define OIER	0x1C
 
-/* Clock Manager Registers					            */
+/* Clock Manager Registers						    */
 #ifdef CFG_CPUSPEED
 CC_BASE:	.word	0x41300000
 #define CCCR	0x00
@@ -189,25 +198,44 @@ cpuspeed:	.word	CFG_CPUSPEED
 #error "You have to define CFG_CPUSPEED!!"
 #endif
 
-
-	/* RS: ???							    */
-	.macro CPWAIT
-	mrc  p15,0,r0,c2,c0,0
-	mov  r0,r0
+	/* takes care the CP15 update has taken place */
+	.macro CPWAIT reg
+	mrc  p15,0,\reg,c2,c0,0
+	mov  \reg,\reg
 	sub  pc,pc,#4
 	.endm
 
-
 cpu_init_crit:
 
 	/* mask all IRQs						    */
+#ifndef CONFIG_CPU_MONAHANS
 	ldr	r0, IC_BASE
 	mov	r1, #0x00
 	str	r1, [r0, #ICMR]
+#else
+	/* Step 1 - Enable CP6 permission */
+	mrc	p15, 0, r1, c15, c1, 0	@ read CPAR
+	orr	r1, r1, #0x40
+		mcr	p15, 0, r1, c15, c1, 0
+	CPWAIT	r1
+
+	/* Step 2 - Mask ICMR & ICMR2 */
+	mov	r1, #0
+	mcr	p6, 0, r1, c1, c0, 0	@ ICMR
+	mcr	p6, 0, r1, c7, c0, 0	@ ICMR2
+
+	/* turn off all clocks but the ones we will definitly require */
+	ldr	r1, =CKENA
+	ldr	r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC)
+	str	r2, [r1]
+	ldr	r1, =CKENB
+	ldr	r2, =(CKENB_6_IRQ)
+	str	r2, [r1]
+#endif
 
-#if defined(CFG_CPUSPEED)
-
-	/* set clock speed */
+#ifndef CONFIG_CPU_MONAHANS
+#ifdef CFG_CPUSPEED
+	/* set clock speed tbd@mk: required for monahans? */
 	ldr	r0, CC_BASE
 	ldr	r1, cpuspeed
 	str	r1, [r0, #CCCR]
@@ -215,7 +243,9 @@ cpu_init_crit:
 	mcr	p14, 0, r0, c6, c0, 0
 
 setspeed_done:
-#endif
+
+#endif /* CFG_CPUSPEED */
+#endif /* CONFIG_CPU_MONAHANS */
 
 	/*
 	 * before relocating, we have to setup RAM timing
@@ -227,19 +257,21 @@ setspeed_done:
 	mov	lr,	ip
 
 	/* Memory interfaces are working. Disable MMU and enable I-cache.   */
+	/* mk: hmm, this is not in the monahans docs, leave it now but
+	 *     check here if it doesn't work :-) */
 
 	ldr	r0, =0x2001		/* enable access to all coproc.	    */
 	mcr	p15, 0, r0, c15, c1, 0
-	CPWAIT
+	CPWAIT r0
 
 	mcr	p15, 0, r0, c7, c10, 4	/* drain the write & fill buffers   */
-	CPWAIT
+	CPWAIT r0
 
 	mcr	p15, 0, r0, c7, c7, 0	/* flush Icache, Dcache and BTB	    */
-	CPWAIT
+	CPWAIT r0
 
 	mcr	p15, 0, r0, c8, c7, 0	/* flush instuction and data TLBs   */
-	CPWAIT
+	CPWAIT r0
 
 	/* Enable the Icache						    */
 /*
@@ -292,7 +324,7 @@ setspeed_done:
 
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
 	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
@@ -419,17 +451,17 @@ fiq:
 #endif
 
 /****************************************************************************/
-/*                                                                          */
+/*									    */
 /* Reset function: the PXA250 doesn't have a reset function, so we have to  */
-/* perform a watchdog timeout for a soft reset.                             */
-/*                                                                          */
+/* perform a watchdog timeout for a soft reset.				    */
+/*									    */
 /****************************************************************************/
 
 	.align	5
 .globl reset_cpu
 
-	/* FIXME: this code is PXA250 specific. How is this handled on      */
-	/*        other XScale processors?                                  */
+	/* FIXME: this code is PXA250 specific. How is this handled on	    */
+	/*	  other XScale processors?				    */
 
 reset_cpu:
 
@@ -437,13 +469,13 @@ reset_cpu:
 
 	ldr	r0, OSTIMER_BASE
 	ldr	r1, [r0, #OWER]
-	orr	r1, r1, #0x0001			/* bit0: WME                */
+	orr	r1, r1, #0x0001			/* bit0: WME		    */
 	str	r1, [r0, #OWER]
 
 	/* OS timer does only wrap every 1165 seconds, so we have to set    */
-	/* the match register as well.                                      */
+	/* the match register as well.					    */
 
-	ldr	r1, [r0, #OSCR]			/* read OS timer            */
+	ldr	r1, [r0, #OSCR]			/* read OS timer	    */
 	add	r1, r1, #0x800			/* let OSMR3 match after    */
 	add	r1, r1, #0x800			/* 4096*(1/3.6864MHz)=1ms   */
 	str	r1, [r0, #OSMR3]