nios2: Move serial drivers to individual files in drivers/serial

   The standard Altera UART & JTAG UART as well as the OpenCores
   YANU driver are now in individual files in drivers/serial
   rather than a single file uner cpu/nios2.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>

1 files changed, 0 insertions, 309 deletions

diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c
deleted file mode 100644
index 6c835af4b1..0000000000
--- a/cpu/nios2/serial.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * YANU Support:
- * Copyright 2010, Renato Andreola <renato.andreola@imagos.it>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <asm/io.h>
-#include <nios2-io.h>
-#include <nios2-yanu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*------------------------------------------------------------------
- * JTAG acts as the serial port
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
-
-static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-void serial_setbrg( void ){ return; }
-int serial_init( void ) { return(0);}
-
-void serial_putc (char c)
-{
-	unsigned val;
-
-	while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0)
-		WATCHDOG_RESET ();
-	writel (&jtag->data, (unsigned char)c);
-}
-
-void serial_puts (const char *s)
-{
-	while (*s != 0)
-		serial_putc (*s++);
-}
-
-int serial_tstc (void)
-{
-	return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
-}
-
-int serial_getc (void)
-{
-	int c;
-	unsigned val;
-
-	while (1) {
-		WATCHDOG_RESET ();
-		val = readl (&jtag->data);
-		if (val & NIOS_JTAG_RVALID)
-			break;
-	}
-	c = val & 0x0ff;
-	return (c);
-}
-
-#elif defined(CONFIG_CONSOLE_YANU)
-/*-----------------------------------------------------------------*/
-/* YANU Imagos serial port */
-/*-----------------------------------------------------------------*/
-
-static yanu_uart_t *uart = (yanu_uart_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
-
-/* Everything's already setup for fixed-baud PTF assignment*/
-
-void serial_setbrg (void)
-{
-	int n, k;
-	const unsigned max_uns = 0xFFFFFFFF;
-	unsigned best_n, best_m, baud;
-
-	/* compute best N and M couple */
-	best_n = YANU_MAX_PRESCALER_N;
-	for (n = YANU_MAX_PRESCALER_N; n >= 0; n--) {
-		if ((unsigned)CONFIG_SYS_CLK_FREQ / (1 << (n + 4)) >=
-		    (unsigned)CONFIG_BAUDRATE) {
-			best_n = n;
-			break;
-		}
-	}
-	for (k = 0;; k++) {
-		if ((unsigned)CONFIG_BAUDRATE <= (max_uns >> (15+n-k)))
-			break;
-	}
-	best_m =
-	    ((unsigned)CONFIG_BAUDRATE * (1 << (15 + n - k))) /
-	    ((unsigned)CONFIG_SYS_CLK_FREQ >> k);
-
-	baud = best_m + best_n * YANU_BAUDE;
-	writel(&uart->baud, baud);
-
-	return;
-}
-
-#else
-
-void serial_setbrg (void)
-{	
-	int n, k;
-	const unsigned max_uns = 0xFFFFFFFF;
-	unsigned best_n, best_m, baud;
-
-	/* compute best N and M couple */
-	best_n = YANU_MAX_PRESCALER_N;
-	for (n = YANU_MAX_PRESCALER_N; n >= 0; n--) {
-		if ((unsigned)CONFIG_SYS_CLK_FREQ / (1 << (n + 4)) >=
-		    gd->baudrate) {
-			best_n = n;
-			break;
-		}
-	}
-	for (k = 0;; k++) {
-		if (gd->baudrate <= (max_uns >> (15+n-k)))
-			break;
-	}
-	best_m =
-	    (gd->baudrate * (1 << (15 + n - k))) /
-	    ((unsigned)CONFIG_SYS_CLK_FREQ >> k);
-
-	baud = best_m + best_n * YANU_BAUDE;
-	writel(&uart->baud, baud);
-
-	return;
-}
-
-
-#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
-
-int serial_init (void)
-{
-	unsigned action,control;
-
-	/* status register cleanup */
-	action =  YANU_ACTION_RRRDY     |
-		YANU_ACTION_RTRDY       |
-		YANU_ACTION_ROE         |
-		YANU_ACTION_RBRK        |
-		YANU_ACTION_RFE         |
-		YANU_ACTION_RPE         |
-	    YANU_ACTION_RFE | YANU_ACTION_RFIFO_CLEAR | YANU_ACTION_TFIFO_CLEAR;
-
-	writel(&uart->action, action);
-	
-	/*  control register cleanup */
-	/* no interrupts enabled */
-	/* one stop bit */
-	/* hardware flow control disabled */
-	/* 8 bits */
-	control = (0x7 << YANU_CONTROL_BITS_POS);
-	/* enven parity just to be clean */
-	control |= YANU_CONTROL_PAREVEN;
-	/* we set threshold for fifo */
-	control |= YANU_CONTROL_RDYDLY * YANU_RXFIFO_DLY;
-	control |= YANU_CONTROL_TXTHR *  YANU_TXFIFO_THR;
-
-	writel(&uart->control, control);
-
-	/* to set baud rate */
-	serial_setbrg();
-
-	return (0);
-}
-
-
-/*-----------------------------------------------------------------------
- * YANU CONSOLE
- *---------------------------------------------------------------------*/
-void serial_putc (char c)
-{
-	int tx_chars;
-	unsigned status;
-
-	if (c == '\n')
-		serial_putc ('\r');
-	
-	while (1) {
-		status = readl(&uart->status);
-		tx_chars = (status>>YANU_TFIFO_CHARS_POS)
-			& ((1<<YANU_TFIFO_CHARS_N)-1);
-		if (tx_chars < YANU_TXFIFO_SIZE-1)
-			break;
-		WATCHDOG_RESET ();
-	}
-
-	writel(&uart->data, (unsigned char)c);
-}
-
-void serial_puts (const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
-
-int serial_tstc(void)
-{
-	unsigned status ;
-
-	status = readl(&uart->status);
-	return (((status >> YANU_RFIFO_CHARS_POS) &
-		 ((1 << YANU_RFIFO_CHARS_N) - 1)) > 0);
-}	
-
-int serial_getc (void)
-{
-	while (serial_tstc() == 0)
-		WATCHDOG_RESET ();
-	
-	/* first we pull the char */
-	writel(&uart->action, YANU_ACTION_RFIFO_PULL);
-
-	return(readl(&uart->data) & YANU_DATA_CHAR_MASK);
-}
-
-#else /*CONFIG_CONSOLE_YANU*/
-
-/*------------------------------------------------------------------
- * UART the serial port
- *-----------------------------------------------------------------*/
-
-static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE;
-
-#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
-
-/* Everything's already setup for fixed-baud PTF
- * assignment
- */
-void serial_setbrg (void){ return; }
-int serial_init (void) { return (0);}
-
-#else
-
-void serial_setbrg (void)
-{
-	unsigned div;
-
-	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
-	writel (&uart->divisor,div);
-	return;
-}
-
-int serial_init (void)
-{
-	serial_setbrg ();
-	return (0);
-}
-
-#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
-
-
-/*-----------------------------------------------------------------------
- * UART CONSOLE
- *---------------------------------------------------------------------*/
-void serial_putc (char c)
-{
-	if (c == '\n')
-		serial_putc ('\r');
-	while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
-		WATCHDOG_RESET ();
-	writel (&uart->txdata,(unsigned char)c);
-}
-
-void serial_puts (const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
-int serial_tstc (void)
-{
-	return (readl (&uart->status) & NIOS_UART_RRDY);
-}
-
-int serial_getc (void)
-{
-	while (serial_tstc () == 0)
-		WATCHDOG_RESET ();
-	return (readl (&uart->rxdata) & 0x00ff );
-}
-
-#endif /* CONFIG_JTAG_CONSOLE */