Initial revision

1 files changed, 353 insertions, 0 deletions

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
new file mode 100644
index 0000000000..29e9faf2b2
--- /dev/null
+++ b/common/cmd_eeprom.c
@@ -0,0 +1,353 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)
+
+extern void eeprom_init  (void);
+extern int  eeprom_read  (unsigned dev_addr, unsigned offset,
+			  uchar *buffer, unsigned cnt);
+extern int  eeprom_write (unsigned dev_addr, unsigned offset,
+			  uchar *buffer, unsigned cnt);
+#endif
+
+
+#if defined(CFG_EEPROM_X40430)
+	/* Maximum number of times to poll for acknowledge after write */
+#define MAX_ACKNOWLEDGE_POLLS	10
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
+int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	const char *const fmt =
+		"\nEEPROM @0x%lX %s: addr %08lx  off %04lx  count %ld ... ";
+
+#if defined(CFG_I2C_MULTI_EEPROMS)
+	if (argc == 6) {
+		ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
+		ulong addr = simple_strtoul (argv[3], NULL, 16);
+		ulong off  = simple_strtoul (argv[4], NULL, 16);
+		ulong cnt  = simple_strtoul (argv[5], NULL, 16);
+#else
+	if (argc == 5) {
+		ulong dev_addr = CFG_DEF_EEPROM_ADDR;
+		ulong addr = simple_strtoul (argv[2], NULL, 16);
+		ulong off  = simple_strtoul (argv[3], NULL, 16);
+		ulong cnt  = simple_strtoul (argv[4], NULL, 16);
+#endif /* CFG_I2C_MULTI_EEPROMS */
+
+# ifndef CONFIG_SPI
+		eeprom_init ();
+# endif /* !CONFIG_SPI */
+
+		if (strcmp (argv[1], "read") == 0) {
+			int rcode;
+
+			printf (fmt, dev_addr, argv[1], addr, off, cnt);
+
+			rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);
+
+			printf ("done\n");
+			return rcode;
+		} else if (strcmp (argv[1], "write") == 0) {
+			int rcode;
+
+			printf (fmt, dev_addr, argv[1], addr, off, cnt);
+
+			rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);
+
+			printf ("done\n");
+			return rcode;
+		}
+	}
+
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+#endif	/* CFG_CMD_EEPROM */
+
+/*-----------------------------------------------------------------------
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ *   0x00000nxx for EEPROM address selectors and page number at n.
+ */
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)
+
+#ifndef CONFIG_SPI
+#if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
+#error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
+#endif
+#endif
+
+int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+	/* Read data until done or would cross a page boundary.
+	 * We must write the address again when changing pages
+	 * because the next page may be in a different device.
+	 */
+	while (offset < end) {
+		unsigned alen, len, maxlen;
+#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen	= 2;
+#else
+		uchar addr[3];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 16;		/* block number */
+		addr[1] = offset >>  8;		/* upper address octet */
+		addr[2] = blk_off;		/* lower address octet */
+		alen	= 3;
+#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+
+		addr[0] |= dev_addr;		/* insert device address */
+
+		maxlen = 0x100 - blk_off;
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+		len    = end - offset;
+		if (len > maxlen)
+			len = maxlen;
+#ifdef CONFIG_SPI
+		spi_read (addr, alen, buffer, len);
+#else
+		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+			rcode = 1;
+#endif
+		buffer += len;
+		offset += len;
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ *   0x00000nxx for EEPROM address selectors and page number at n.
+ */
+
+int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+#if defined(CFG_EEPROM_X40430)
+	uchar	contr_r_addr[2];
+	uchar	addr_void[2];
+	uchar	contr_reg[2];
+	uchar	ctrl_reg_v;
+	int	i;
+#endif
+
+	/* Write data until done or would cross a write page boundary.
+	 * We must write the address again when changing pages
+	 * because the address counter only increments within a page.
+	 */
+
+	while (offset < end) {
+		unsigned alen, len, maxlen;
+#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen	= 2;
+#else
+		uchar addr[3];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 16;		/* block number */
+		addr[1] = offset >>  8;		/* upper address octet */
+		addr[2] = blk_off;		/* lower address octet */
+		alen	= 3;
+#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+
+		addr[0] |= dev_addr;		/* insert device address */
+
+#if defined(CFG_EEPROM_PAGE_WRITE_BITS)
+
+#define	EEPROM_PAGE_SIZE	(1 << CFG_EEPROM_PAGE_WRITE_BITS)
+#define	EEPROM_PAGE_OFFSET(x)	((x) & (EEPROM_PAGE_SIZE - 1))
+
+		maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
+#else
+		maxlen = 0x100 - blk_off;
+#endif
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+
+		len = end - offset;
+		if (len > maxlen)
+			len = maxlen;
+#ifdef CONFIG_SPI
+		spi_write (addr, alen, buffer, len);
+#else
+#if defined(CFG_EEPROM_X40430)
+		/* Get the value of the control register.
+		 * Set current address (internal pointer in the x40430)
+		 * to 0x1ff.
+		 */
+		contr_r_addr[0] = 9;
+		contr_r_addr[1] = 0xff;
+		addr_void[0]    = 0;
+		addr_void[1]    = addr[1];
+#ifdef CFG_I2C_EEPROM_ADDR
+		contr_r_addr[0] |= CFG_I2C_EEPROM_ADDR;
+		addr_void[0]    |= CFG_I2C_EEPROM_ADDR;
+#endif
+		contr_reg[0] = 0xff;
+		if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
+			rcode = 1;
+		}
+		ctrl_reg_v = contr_reg[0];
+
+		/* Are any of the eeprom blocks write protected?
+		 */
+		if (ctrl_reg_v & 0x18) {
+			ctrl_reg_v &= ~0x18;   /* reset block protect bits  */
+			ctrl_reg_v |=  0x02;   /* set write enable latch    */
+			ctrl_reg_v &= ~0x04;   /* clear RWEL                */
+
+			/* Set write enable latch.
+			 */
+			contr_reg[0] = 0x02;
+			if (i2c_write (contr_r_addr[0], 0xff, 1, contr_reg, 1) != 0) {
+				rcode = 1;
+			}
+
+			/* Set register write enable latch.
+			 */
+			contr_reg[0] = 0x06;
+			if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
+				rcode = 1;
+			}
+
+			/* Modify ctrl register.
+			 */
+			contr_reg[0] = ctrl_reg_v;
+			if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
+				rcode = 1;
+			}
+
+			/* The write (above) is an operation on NV memory.
+			 * These can take some time (~5ms), and the device
+			 * will not respond to further I2C messages till
+			 * it's completed the write.
+			 * So poll device for an I2C acknowledge.
+			 * When we get one we know we can continue with other
+			 * operations.
+			 */
+			contr_reg[0] = 0;
+			for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
+				if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 1)
+					break;	/* got ack */
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+			}
+			if (i == MAX_ACKNOWLEDGE_POLLS) {
+				printf("EEPROM poll acknowledge failed\n");
+				rcode = 1;
+			}
+		}
+
+		/* Is the write enable latch on?.
+		 */
+		else if (!(ctrl_reg_v & 0x02)) {
+			/* Set write enable latch.
+			 */
+			contr_reg[0] = 0x02;
+			if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
+			       rcode = 1;
+			}
+		}
+		/* Write is enabled ... now write eeprom value.
+		 */
+#endif
+		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+			rcode = 1;
+
+#endif
+		buffer += len;
+		offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Set default values
+ */
+#ifndef	CFG_I2C_SPEED
+#define	CFG_I2C_SPEED	50000
+#endif
+
+#ifndef	CFG_I2C_SLAVE
+#define	CFG_I2C_SLAVE	0xFE
+#endif
+
+void eeprom_init  (void)
+{
+#if defined(CONFIG_SPI)
+	spi_init_f ();
+#endif
+#if defined(CONFIG_HARD_I2C) || \
+    defined(CONFIG_SOFT_I2C)
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+#endif
+}
+/*-----------------------------------------------------------------------
+ */
+#endif	/* CFG_CMD_EEPROM */