powerpc/ppc4xx: Make gdsys 405ep boards reset more generic

In order to add boards that have different hardware for fpga reset,
any 405ep gdsys board now provides these functions:

void gd405ep_init(void);
void gd405ep_set_fpga_reset(unsigned state);
void gd405ep_setup_hw(void);
int gd405ep_get_fpga_done(unsigned fpga);

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>

9 files changed, 293 insertions, 172 deletions

diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
index 8b80533d98..bea671e1f7 100644
--- a/board/gdsys/405ep/405ep.c
+++ b/board/gdsys/405ep/405ep.c
@@ -28,12 +28,9 @@
 #include <asm/ppc4xx-gpio.h>
 #include <asm/global_data.h>
 
+#include "405ep.h"
 #include <gdsys_fpga.h>
 
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-
 #define REFLECTION_TESTPATTERN 0xdede
 #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
 
@@ -55,7 +52,6 @@ void print_fpga_state(unsigned dev)
 int board_early_init_f(void)
 {
 	unsigned k;
-	unsigned ctr;
 
 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
 		gd->fpga_state[k] = 0;
@@ -73,26 +69,29 @@ int board_early_init_f(void)
 	 * -> ca. 15 us
 	 */
 	mtebc(EBC0_CFG, 0xa8400000);	/* ebc always driven */
+	return 0;
+}
 
-	/*
-	 * setup io-latches for reset
-	 */
-	out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
-	out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+int board_early_init_r(void)
+{
+	unsigned k;
+	unsigned ctr;
 
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	gpio_write_bit(21, 0);
-	gpio_write_bit(22, 1);
+	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
+		gd->fpga_state[k] = 0;
 
 	/*
-	 * wait for fpga-done
+	 * reset FPGA
 	 */
+	gd405ep_init();
+
+	gd405ep_set_fpga_reset(1);
+
+	gd405ep_setup_hw();
+
 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
 		ctr = 0;
-		while (!(in_le16((void *)LATCH2_BASE)
-			& CONFIG_SYS_FPGA_DONE(k))) {
+		while (!gd405ep_get_fpga_done(k)) {
 			udelay(100000);
 			if (ctr++ > 5) {
 				gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
@@ -101,12 +100,9 @@ int board_early_init_f(void)
 		}
 	}
 
-	/*
-	 * setup io-latches for boot (stop reset)
-	 */
 	udelay(10);
-	out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
-	out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+
+	gd405ep_set_fpga_reset(0);
 
 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
 		ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k);
diff --git a/board/gdsys/405ep/405ep.h b/board/gdsys/405ep/405ep.h
new file mode 100644
index 0000000000..5647dbc62b
--- /dev/null
+++ b/board/gdsys/405ep/405ep.h
@@ -0,0 +1,10 @@
+#ifndef __405EP_H_
+#define __405EP_H_
+
+/* functions to be provided by board implementation */
+void gd405ep_init(void);
+void gd405ep_set_fpga_reset(unsigned state);
+void gd405ep_setup_hw(void);
+int gd405ep_get_fpga_done(unsigned fpga);
+
+#endif /* __405EP_H_ */
diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile
index feb5cecf0b..38e5ea4e1d 100644
--- a/board/gdsys/405ep/Makefile
+++ b/board/gdsys/405ep/Makefile
@@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
+COBJS-$(CONFIG_NEO) += neo.o
 COBJS-$(CONFIG_IO) += io.o
 COBJS-$(CONFIG_IOCON) += iocon.o
 COBJS-$(CONFIG_DLVISION_10G) += dlvision-10g.o
diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c
index f55afbd129..adaffb26d7 100644
--- a/board/gdsys/405ep/dlvision-10g.c
+++ b/board/gdsys/405ep/dlvision-10g.c
@@ -27,15 +27,18 @@
 #include <asm/io.h>
 #include <asm/ppc4xx-gpio.h>
 
+#include "405ep.h"
 #include <gdsys_fpga.h>
 
 #include "../common/osd.h"
 
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
 #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-#define LATCH2_MC2_PRESENT_N 0x0080
-
 #define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
 
+#define LATCH2_MC2_PRESENT_N 0x0080
+
 enum {
 	UNITTYPE_VIDEO_USER = 0,
 	UNITTYPE_MAIN_USER = 1,
@@ -261,3 +264,32 @@ int last_stage_init(void)
 
 	return 0;
 }
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+	if (state) {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+	} else {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+	}
+}
+
+void gd405ep_setup_hw(void)
+{
+	/*
+	 * set "startup-finished"-gpios
+	 */
+	gpio_write_bit(21, 0);
+	gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+	return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c
index db1ea7f0c5..ac4cefde6d 100644
--- a/board/gdsys/405ep/io.c
+++ b/board/gdsys/405ep/io.c
@@ -29,8 +29,13 @@
 
 #include <miiphy.h>
 
+#include "405ep.h"
 #include <gdsys_fpga.h>
 
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
 #define PHYREG_CONTROL				0
 #define PHYREG_PAGE_ADDRESS			22
 #define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1	16
@@ -175,3 +180,32 @@ int last_stage_init(void)
 
 	return 0;
 }
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+	if (state) {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+	} else {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+	}
+}
+
+void gd405ep_setup_hw(void)
+{
+	/*
+	 * set "startup-finished"-gpios
+	 */
+	gpio_write_bit(21, 0);
+	gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+	return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c
index ce53340894..ed27791c3a 100644
--- a/board/gdsys/405ep/iocon.c
+++ b/board/gdsys/405ep/iocon.c
@@ -27,10 +27,15 @@
 #include <asm/io.h>
 #include <asm/ppc4xx-gpio.h>
 
+#include "405ep.h"
 #include <gdsys_fpga.h>
 
 #include "../common/osd.h"
 
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
 enum {
 	UNITTYPE_MAIN_SERVER = 0,
 	UNITTYPE_MAIN_USER = 1,
@@ -231,3 +236,32 @@ int fpga_gpio_get(int pin)
 {
 	return in_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x14)) & pin;
 }
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+	if (state) {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+	} else {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+	}
+}
+
+void gd405ep_setup_hw(void)
+{
+	/*
+	 * set "startup-finished"-gpios
+	 */
+	gpio_write_bit(21, 0);
+	gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+	return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c
new file mode 100644
index 0000000000..f38edd2eb8
--- /dev/null
+++ b/board/gdsys/405ep/neo.c
@@ -0,0 +1,161 @@
+/*
+ * (C) Copyright 2011
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+#include <dtt.h>
+
+#include "405ep.h"
+#include <gdsys_fpga.h>
+
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
+enum {
+	UNITTYPE_CCX16 = 1,
+	UNITTYPE_CCIP216 = 2,
+};
+
+enum {
+	HWVER_300 = 3,
+};
+
+int misc_init_r(void)
+{
+	/* startup fans */
+	dtt_init();
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	puts("Board: CATCenter Neo");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+
+	puts("\n");
+
+	return 0;
+}
+
+static void print_fpga_info(void)
+{
+	ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
+	u16 versions = in_le16(&fpga->versions);
+	u16 fpga_version = in_le16(&fpga->fpga_version);
+	u16 fpga_features = in_le16(&fpga->fpga_features);
+	int fpga_state = get_fpga_state(0);
+	unsigned unit_type;
+	unsigned hardware_version;
+	unsigned feature_channels;
+
+	puts("FPGA:  ");
+	if (fpga_state & FPGA_STATE_DONE_FAILED) {
+		printf(" done timed out\n");
+		return;
+	}
+
+	if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
+		printf(" refelectione test failed\n");
+		return;
+	}
+
+	unit_type = (versions & 0xf000) >> 12;
+	hardware_version = versions & 0x000f;
+	feature_channels = fpga_features & 0x007f;
+
+	switch (unit_type) {
+	case UNITTYPE_CCX16:
+		printf("CCX-Switch");
+		break;
+
+	default:
+		printf("UnitType %d(not supported)", unit_type);
+		break;
+	}
+
+	switch (hardware_version) {
+	case HWVER_300:
+		printf(" HW-Ver 3.00-3.12\n");
+		break;
+
+	default:
+		printf(" HW-Ver %d(not supported)\n",
+		       hardware_version);
+		break;
+	}
+
+	printf("       FPGA V %d.%02d, features:",
+		fpga_version / 100, fpga_version % 100);
+
+	printf(" %d channel(s)\n", feature_channels);
+}
+
+int last_stage_init(void)
+{
+	print_fpga_info();
+
+	return 0;
+}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+	if (state) {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+	} else {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+	}
+}
+
+void gd405ep_setup_hw(void)
+{
+	/*
+	 * set "startup-finished"-gpios
+	 */
+	gpio_write_bit(21, 0);
+	gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+	/*
+	 * Neo hardware has no FPGA-DONE GPIO
+	 */
+	return 1;
+}
diff --git a/board/gdsys/neo/Makefile b/board/gdsys/neo/Makefile
deleted file mode 100644
index dc5b5b887a..0000000000
--- a/board/gdsys/neo/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o
-SOBJS   =
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c
deleted file mode 100644
index d21d599fa7..0000000000
--- a/board/gdsys/neo/neo.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#define HWTYPE_CCX16	1
-#define HWREV_300	3
-
-int board_early_init_f(void)
-{
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr(UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest prio */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
-	 * -> ca. 15 us
-	 */
-	mtebc(EBC0_CFG, 0xa8400000);	/* ebc always driven */
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u16 val = in_le16((void *)CONFIG_FPGA_BASE + 2);
-	u8 unit_type;
-	u8 hardware_cpu_ports;
-	u8 hardware_con_ports;
-	u8 hardware_version;
-
-	printf("Board: CATCenter Neo");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	puts("\n       ");
-
-	unit_type = (val & 0xf000) >> 12;
-	hardware_cpu_ports = ((val & 0x0f00) >> 8) * 8;
-	hardware_con_ports = ((val & 0x00f0) >> 4) * 2;
-	hardware_version = val & 0x000f;
-
-	switch (unit_type) {
-	case HWTYPE_CCX16:
-		printf("CCX16-FPGA (80 UARTs)");
-		break;
-
-	default:
-		printf("UnitType %d, unsupported", unit_type);
-		break;
-	}
-
-	printf(", %d cpu ports, %d console ports,",
-	       hardware_cpu_ports, hardware_con_ports);
-
-	switch (hardware_version) {
-	case HWREV_300:
-		printf(" HW-Ver 3.00\n");
-		break;
-
-	default:
-		printf(" HW-Ver %d, unsupported\n",
-		       hardware_version);
-		break;
-	}
-
-	return 0;
-}