* Code cleanup:LABEL_2003_06_27_2340

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

7 files changed, 389 insertions, 395 deletions

diff --git a/board/sc520_cdp/Makefile b/board/sc520_cdp/Makefile
index 0f50393468..f9a36f9f42 100644
--- a/board/sc520_cdp/Makefile
+++ b/board/sc520_cdp/Makefile
@@ -25,11 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= sc520_cdp.o flash.o 
+OBJS	:= sc520_cdp.o flash.o
 SOBJS	:= sc520_cdp_asm.o sc520_cdp_asm16.o
 
 $(LIB):	$(OBJS) $(SOBJS)
-	$(AR) crv $@ $^
+	$(AR) crv $@ $(OBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/sc520_cdp/flash.c b/board/sc520_cdp/flash.c
index 1ebb32e2e9..a4d37e5087 100644
--- a/board/sc520_cdp/flash.c
+++ b/board/sc520_cdp/flash.c
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2002, 2003
  * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- * 
+ *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Alex Zuepke <azu@sysgo.de>
@@ -55,122 +55,121 @@ flash_info_t    flash_info[SC520_MAX_FLASH_BANKS];
 static u32 _probe_flash(u32 addr, u32 bw, int il)
 {
 	u32 result=0;
-	
+
 	/* First do an unlock cycle for the benefit of
 	 * devices that need it */
-	
+
 	switch (bw) {
-		
+
 	case 1:
 		*(volatile u8*)(addr+0x5555) = 0xaa;
 		*(volatile u8*)(addr+0x2aaa) = 0x55;
 		*(volatile u8*)(addr+0x5555) = 0x90;
-		
+
 		/* Read vendor */
 		result = *(volatile u8*)addr;
 		result <<= 16;
-		
+
 		/* Read device */
 		result |= *(volatile u8*)(addr+2);
-		
+
 		/* Return device to data mode */
 		*(volatile u8*)addr = 0xff;
-		*(volatile u8*)(addr+0x5555), 0xf0;  
+		*(volatile u8*)(addr+0x5555), 0xf0;
 		break;
-		
+
 	case 2:
 		*(volatile u16*)(addr+0xaaaa) = 0xaaaa;
 		*(volatile u16*)(addr+0x5554) = 0x5555;
-		
+
 		/* Issue identification command */
 		if (il == 2) {
 			*(volatile u16*)(addr+0xaaaa) = 0x9090;
-			
+
 			/* Read vendor */
 			result = *(volatile u8*)addr;
 			result <<= 16;
-			
+
 			/* Read device */
 			result |= *(volatile u8*)(addr+2);
-			
+
 			/* Return device to data mode */
 			*(volatile u16*)addr =  0xffff;
-			*(volatile u16*)(addr+0xaaaa), 0xf0f0;  
-			
+			*(volatile u16*)(addr+0xaaaa), 0xf0f0;
+
 		} else {
 			*(volatile u8*)(addr+0xaaaa) = 0x90;
 			/* Read vendor */
 			result = *(volatile u16*)addr;
 			result <<= 16;
-			
+
 			/* Read device */
 			result |= *(volatile u16*)(addr+2);
-			
+
 			/* Return device to data mode */
 			*(volatile u8*)addr = 0xff;
-			*(volatile u8*)(addr+0xaaaa), 0xf0;  			
+			*(volatile u8*)(addr+0xaaaa), 0xf0;
 		}
-		
+
 		break;
-		
+
 	 case 4:
 		*(volatile u32*)(addr+0x5554) = 0xaaaaaaaa;
 		*(volatile u32*)(addr+0xaaa8) = 0x55555555;
-		
+
 		switch (il) {
 		case 1:
 			/* Issue identification command */
 			*(volatile u8*)(addr+0x5554) = 0x90;
-			
+
 			/* Read vendor */
 			result = *(volatile u16*)addr;
 			result <<= 16;
-		
+
 			/* Read device */
 			result |= *(volatile u16*)(addr+4);
-			
+
 			/* Return device to data mode */
 			*(volatile u8*)addr =  0xff;
-			*(volatile u8*)(addr+0x5554), 0xf0;  
+			*(volatile u8*)(addr+0x5554), 0xf0;
 			break;
-			
+
 		case 2:
 			/* Issue identification command */
 			*(volatile u32*)(addr + 0x5554) = 0x00900090;
-			
+
 			/* Read vendor */
 			result = *(volatile u16*)addr;
 			result <<= 16;
-			
+
 			/* Read device */
 			result |= *(volatile u16*)(addr+4);
-			
+
 			/* Return device to data mode */
 			*(volatile u32*)addr =  0x00ff00ff;
-			*(volatile u32*)(addr+0x5554), 0x00f000f0;  
+			*(volatile u32*)(addr+0x5554), 0x00f000f0;
 			break;
-			
+
 		case 4:
 			/* Issue identification command */
 			*(volatile u32*)(addr+0x5554) = 0x90909090;
-			
+
 			/* Read vendor */
 			result = *(volatile u8*)addr;
 			result <<= 16;
-			
+
 			/* Read device */
 			result |= *(volatile u8*)(addr+4);
-			
+
 			/* Return device to data mode */
 			*(volatile u32*)addr =  0xffffffff;
-			*(volatile u32*)(addr+0x5554), 0xf0f0f0f0; 
+			*(volatile u32*)(addr+0x5554), 0xf0f0f0f0;
 			break;
 		}
 		break;
 	}
-	
-	
-	
+
+
 	return result;
 }
 
@@ -180,36 +179,36 @@ asm ("_probe_flash_end:\n"
 
 static int identify_flash(unsigned address, int width)
 {
-	int is;	
+	int is;
 	int device;
-	int vendor;	
+	int vendor;
 	int size;
 	unsigned res;
-	
+
 	u32 (*_probe_flash_ptr)(u32 a, u32 bw, int il);
-	
-	size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash; 
-	
+
+	size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash;
+
 	if (size > PROBE_BUFFER_SIZE) {
 		printf("_probe_flash() routine too large (%d) %p - %p\n",
 		       size, &_probe_flash_end, _probe_flash);
 		return 0;
 	}
-	
+
 	memcpy(buffer, _probe_flash, size);
 	_probe_flash_ptr = (void*)buffer;
-	
+
 	is = disable_interrupts();
 	res = _probe_flash_ptr(address, width, 1);
 	if (is) {
 		enable_interrupts();
 	}
-	
-	
-        vendor = res >> 16;
+
+
+	vendor = res >> 16;
 	device = res & 0xffff;
-	
-		
+
+
 	return res;
 }
 
@@ -217,12 +216,12 @@ ulong flash_init(void)
 {
 	int i, j;
 	ulong size = 0;
-	
+
 	for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) {
 		unsigned id;
 		ulong flashbase = 0;
-		int sectsize = 0; 
-		
+		int sectsize = 0;
+
 		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
 		switch (i) {
 		case 0:
@@ -237,7 +236,7 @@ ulong flash_init(void)
 		default:
 			panic("configured to many flash banks!\n");
 		}
-		
+
 		id = identify_flash(flashbase, 4);
 		switch (id & 0x00ff00ff) {
 		case 0x000100c8:
@@ -245,31 +244,31 @@ ulong flash_init(void)
 			flash_info[i].flash_id =
 				(AMD_MANUFACT & FLASH_VENDMASK) |
 				(AMD_ID_LV016B & FLASH_TYPEMASK);
-			
+
 			flash_info[i].size = AMD29LV016B_SIZE*4;
 			flash_info[i].sector_count = AMD29LV016B_SECTORS;
 			sectsize = (AMD29LV016B_SIZE*4)/AMD29LV016B_SECTORS;
 			printf("Bank %d: 4 x AMD 29LV017B\n", i);
 			break;
-			
-			
+
+
 		default:
 			printf("Bank %d have unknown flash %08x\n", i, id);
 			flash_info[i].flash_id = FLASH_UNKNOWN;
 			continue;
 		}
-		
+
 		for (j = 0; j < flash_info[i].sector_count; j++) {
 			flash_info[i].start[j] = flashbase + j * sectsize;
 		}
 		size += flash_info[i].size;
-		
+
 		flash_protect(FLAG_PROTECT_CLEAR,
 			      flash_info[i].start[0],
 			       flash_info[i].start[0] + flash_info[i].size - 1,
 			      &flash_info[i]);
 	}
-	
+
 	/*
 	 * Protect monitor and environment sectors
 	 */
@@ -282,7 +281,7 @@ ulong flash_init(void)
 		      CFG_ENV_ADDR,
 		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
 		      &flash_info[0]);
-#endif	
+#endif
 	return size;
 }
 
@@ -291,9 +290,9 @@ ulong flash_init(void)
 void flash_print_info(flash_info_t *info)
 {
 	int i;
-	
+
 	switch (info->flash_id & FLASH_VENDMASK) {
-		
+
 	case (AMD_MANUFACT & FLASH_VENDMASK):
 		printf("AMD:   ");
 		switch (info->flash_id & FLASH_TYPEMASK) {
@@ -305,17 +304,17 @@ void flash_print_info(flash_info_t *info)
 			goto done;
 			break;
 		}
-		
+
 		break;
 	default:
 		printf("Unknown Vendor ");
 		break;
 	}
-	
-	
+
+
 	printf("  Size: %ld MB in %d Sectors\n",
 	       info->size >> 20, info->sector_count);
-	
+
 	printf("  Sector Start Addresses:");
 	for (i = 0; i < info->sector_count; i++) {
 		if ((i % 5) == 0) {
@@ -325,7 +324,7 @@ void flash_print_info(flash_info_t *info)
 			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf ("\n");
-	
+
 	done:
 }
 
@@ -339,7 +338,7 @@ void flash_print_info(flash_info_t *info)
 	unsigned milli=0; \
 	\
 	micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
-         \
+	 \
 	for (;;) { \
 		\
 		milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
@@ -349,12 +348,12 @@ void flash_print_info(flash_info_t *info)
 			break; \
 		} \
 	} \
-} while (0) 
+} while (0)
 
 static u32 _amd_erase_flash(u32 addr, u32 sector)
 {
 	unsigned elapsed;
-	
+
 	/* Issue erase */
 	*(volatile u32*)(addr + 0x5554) = 0xAAAAAAAA;
 	*(volatile u32*)(addr + 0xaaa8) = 0x55555555;
@@ -364,21 +363,21 @@ static u32 _amd_erase_flash(u32 addr, u32 sector)
 	*(volatile u32*)(addr + 0xaaa8) = 0x55555555;
 	/* Sector erase command comes last */
 	*(volatile u32*)(addr + sector) = 0x30303030;
-	
+
 	elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
 	elapsed = 0;
 	__udelay(50);
 	while (((*(volatile u32*)(addr + sector)) & 0x80808080) != 0x80808080) {
-		
+
 		elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
 		if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
 			*(volatile u32*)(addr) = 0xf0f0f0f0;
-			return 1;			
+			return 1;
 		}
 	}
-	
+
 	*(volatile u32*)(addr) = 0xf0f0f0f0;
-	
+
 	return 0;
 }
 
@@ -392,7 +391,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	int prot;
 	int sect;
 	unsigned size;
-	
+
 	if ((s_first < 0) || (s_first > s_last)) {
 		if (info->flash_id == FLASH_UNKNOWN) {
 			printf("- missing\n");
@@ -401,66 +400,66 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 		}
 		return 1;
 	}
-	
+
 	if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) {
-		size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash; 
-		
+		size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash;
+
 		if (size > PROBE_BUFFER_SIZE) {
 			printf("_amd_erase_flash() routine too large (%d) %p - %p\n",
 			       size, &_amd_erase_flash_end, _amd_erase_flash);
 			return 0;
 		}
-		
+
 		memcpy(buffer, _amd_erase_flash, size);
 		_erase_flash_ptr = (void*)buffer;
-	
+
 	}  else {
 		printf ("Can't erase unknown flash type - aborted\n");
 		return 1;
 	}
-	
+
 	prot = 0;
 	for (sect=s_first; sect<=s_last; ++sect) {
 		if (info->protect[sect]) {
 			prot++;
 		}
 	}
-	
+
 	if (prot) {
 		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
 	} else {
 		printf ("\n");
 	}
-		
-	
+
+
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
-		
+
 		if (info->protect[sect] == 0) { /* not protected */
 			int res;
 			int flag;
-			
+
 			/* Disable interrupts which might cause a timeout here */
 			flag = disable_interrupts();
-			
+
 			res = _erase_flash_ptr(info->start[0], info->start[sect]-info->start[0]);
-			
+
 			/* re-enable interrupts if necessary */
 			if (flag) {
 				enable_interrupts();
 			}
-			
-			
+
+
 			if (res) {
 				printf("Erase timed out, sector %d\n", sect);
 				return res;
 			}
-			
-			putc('.');			
-		}		
+
+			putc('.');
+		}
 	}
 
-	
+
 	return 0;
 }
 
@@ -476,33 +475,33 @@ static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
 	volatile u32 *dest2 = (u32*)dest;
 	volatile u32 *data2 = (u32*)&data;
 	unsigned elapsed;
-	
+
 	/* Check if Flash is (sufficiently) erased */
 	if ((*((volatile u32*)dest) & (u32)data) != (u32)data) {
 		return 2;
 	}
-		
+
 	addr2[0x5554] = 0xAAAAAAAA;
 	addr2[0xaaa8] = 0x55555555;
 	addr2[0x5554] = 0xA0A0A0A0;
-	
+
 	dest2[0] = data;
-	
+
 	elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
 	elapsed = 0;
-	
+
 	/* data polling for D7 */
 	while ((dest2[0] & 0x80808080) != (data2[0] & 0x80808080)) {
 		elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
 		if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
 			addr2[0] = 0xf0f0f0f0;
-			return 1;			
+			return 1;
 		}
 	}
 
-	
+
 	addr2[0] = 0xf0f0f0f0;
-	
+
 	return 0;
 }
 
@@ -511,8 +510,6 @@ asm ("_amd_write_word_end:\n"
      ".long 0\n");
 
 
-
-
 /*-----------------------------------------------------------------------
  * Copy memory to flash, returns:
  * 0 - OK
@@ -528,19 +525,19 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	int flag;
 	u32 (*_write_word_ptr)(unsigned start, unsigned dest, unsigned data);
 	unsigned size;
-	
+
 	if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) {
-		size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word; 
-		
+		size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word;
+
 		if (size > PROBE_BUFFER_SIZE) {
 			printf("_amd_write_word() routine too large (%d) %p - %p\n",
 			       size, &_amd_write_word_end, _amd_write_word);
 			return 0;
 		}
-		
+
 		memcpy(buffer, _amd_write_word, size);
 		_write_word_ptr = (void*)buffer;
-	
+
 	} else {
 		printf ("Can't program unknown flash type - aborted\n");
 		return 3;
@@ -548,7 +545,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 
 
 	wp = (addr & ~3);	/* get lower word aligned address */
-	
+
 
 	/*
 	 * handle unaligned start bytes
@@ -566,12 +563,12 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		for (; cnt==0 && i<4; ++i, ++cp) {
 			data |= (*(uchar *)cp)  << (8*i);
 		}
-		
+
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
-		
+
 		rc = _write_word_ptr(info->start[0], wp, data);
-		
+
 		/* re-enable interrupts if necessary */
 		if (flag) {
 			enable_interrupts();
@@ -581,22 +578,22 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		}
 		wp += 4;
 	}
-	
+
 	/*
 	 * handle word aligned part
 	 */
 	while (cnt >= 4) {
 		data = 0;
-			       
+
 		for (i=0; i<4; ++i) {
 			data |= *src++ << (8*i);
 		}
-		
+
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
 		rc = _write_word_ptr(info->start[0], wp, data);
-		
+
 		/* re-enable interrupts if necessary */
 		if (flag) {
 			enable_interrupts();
@@ -607,11 +604,11 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp  += 4;
 		cnt -= 4;
 	}
-	
+
 	if (cnt == 0) {
 		return 0;
 	}
-	
+
 	/*
 	 * handle unaligned tail bytes
 	 */
@@ -620,7 +617,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		data |= *src++ << (8*i);
 		--cnt;
 	}
-	
+
 	for (; i<4; ++i, ++cp) {
 		data |= (*(uchar *)cp) << (8*i);
 	}
@@ -629,14 +626,12 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	flag = disable_interrupts();
 
 	rc = _write_word_ptr(info->start[0], wp, data);
-	
+
 	/* re-enable interrupts if necessary */
 	if (flag) {
 		enable_interrupts();
 	}
-	
-	return rc;
-	
-}
 
+	return rc;
 
+}
diff --git a/board/sc520_cdp/flash_old.c b/board/sc520_cdp/flash_old.c
index d4204a8ced..416b01d2a5 100644
--- a/board/sc520_cdp/flash_old.c
+++ b/board/sc520_cdp/flash_old.c
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2002
  * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- * 
+ *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Alex Zuepke <azu@sysgo.de>
@@ -67,22 +67,22 @@ ulong flash_init(void)
 {
 	int i, j;
 	ulong size = 0;
-	
+
 	for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
-		int sectsize = 0; 
+		int sectsize = 0;
 		if (i==0 || i==2) {
-			/* FixMe: this assumes that bank 0 and 2 
+			/* FixMe: this assumes that bank 0 and 2
 			 * are mapped to the two 8Mb banks */
 			flash_info[i].flash_id =
 				(AMD_MANUFACT & FLASH_VENDMASK) |
 				(AMD_ID_LV016B & FLASH_TYPEMASK);
-			
+
 			flash_info[i].size = AMD29LV016_SIZE*4;
 			flash_info[i].sector_count = AMD29LV016_SECTORS;
 			sectsize = (AMD29LV016_SIZE*4)/AMD29LV016_SECTORS;
 		} else {
-			/* FixMe: this assumes that bank1 is unmapped 
+			/* FixMe: this assumes that bank1 is unmapped
 			 * (or mapped to the same flash bank as BOOTCS) */
 			flash_info[i].flash_id = 0;
 			flash_info[i].size = 0;
@@ -103,14 +103,14 @@ ulong flash_init(void)
 		default:
 			panic("configured to many flash banks!\n");
 		}
-		
+
 		for (j = 0; j < flash_info[i].sector_count; j++) {
 			flash_info[i].start[j] = sectsize;
 			flash_info[i].start[j] = flashbase + j * sectsize;
 		}
 		size += flash_info[i].size;
 	}
-	
+
 	/*
 	 * Protect monitor and environment sectors
 	 */
@@ -118,7 +118,7 @@ ulong flash_init(void)
 		      i386boot_start-SC520_FLASH_BANK0_BASE,
 		      i386boot_end-SC520_FLASH_BANK0_BASE,
 		      &flash_info[0]);
-	
+
 #ifdef CFG_ENV_ADDR
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_ENV_ADDR,
@@ -142,7 +142,7 @@ void flash_print_info(flash_info_t *info)
 		printf("Unknown Vendor ");
 		break;
 	}
-	
+
 	switch (info->flash_id & FLASH_TYPEMASK) {
 	case (AMD_ID_LV016B & FLASH_TYPEMASK):
 		printf("4x Amd29LV016B (16Mbit)\n");
@@ -152,10 +152,10 @@ void flash_print_info(flash_info_t *info)
 		goto done;
 		break;
 	}
-	
+
 	printf("  Size: %ld MB in %d Sectors\n",
 	       info->size >> 20, info->sector_count);
-	
+
 	printf("  Sector Start Addresses:");
 	for (i = 0; i < info->sector_count; i++) {
 		if ((i % 5) == 0) {
@@ -165,7 +165,7 @@ void flash_print_info(flash_info_t *info)
 			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf ("\n");
-	
+
 	done:
 }
 
@@ -180,20 +180,20 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	int chip1, chip2;
 
 	/* first look for protection bits */
-	
+
 	if (info->flash_id == FLASH_UNKNOWN) {
 		return ERR_UNKNOWN_FLASH_TYPE;
 	}
-	
+
 	if ((s_first < 0) || (s_first > s_last)) {
 		return ERR_INVAL;
 	}
-	
+
 	if ((info->flash_id & FLASH_VENDMASK) !=
 	    (AMD_MANUFACT & FLASH_VENDMASK)) {
 		return ERR_UNKNOWN_FLASH_VENDOR;
 	}
-	
+
 	prot = 0;
 	for (sect=s_first; sect<=s_last; ++sect) {
 		if (info->protect[sect]) {
@@ -203,7 +203,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	if (prot) {
 		return ERR_PROTECTED;
 	}
-	
+
 	/*
 	 * Disable interrupts which might cause a timeout
 	 * here. Remember that our exception vectors are
@@ -212,77 +212,77 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	 * chip is in programming mode.
 	 */
 	iflag = disable_interrupts();
-	
+
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
 		printf("Erasing sector %2d ... ", sect);
-		
+
 		/* arm simple, non interrupt dependent timer */
 		reset_timer();
-		
-		if (info->protect[sect] == 0) {	
+
+		if (info->protect[sect] == 0) {
 			/* not protected */
 			ulong addr = info->start[sect];
-			
+
 			writel(CMD_UNLOCK1, addr + 1);
 			writel(CMD_UNLOCK2, addr + 2);
 			writel(CMD_ERASE_SETUP, addr + 1);
-			
+
 			writel(CMD_UNLOCK1, addr + 1);
 			writel(CMD_UNLOCK2, addr + 2);
 			writel(CMD_ERASE_CONFIRM, addr);
 
-			
+
 			/* wait until flash is ready */
 			chip1 = chip2 = 0;
-			
+
 			do {
 				result = readl(addr);
-				
+
 				/* check timeout */
 				if (get_timer(0) > CFG_FLASH_ERASE_TOUT) {
 					writel(CMD_READ_ARRAY, addr + 1);
 					chip1 = TMO;
 					break;
 				}
-				
+
 				if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) {
 					chip1 = READY;
 				}
-				
+
 				if (!chip1 && (result & 0xFFFF) & BIT_PROGRAM_ERROR) {
 					chip1 = ERR;
 				}
-				
+
 				if (!chip2 && (result >> 16) & BIT_ERASE_DONE) {
 					chip2 = READY;
 				}
-				
+
 				if (!chip2 && (result >> 16) & BIT_PROGRAM_ERROR) {
 					chip2 = ERR;
 				}
-				
+
 			}  while (!chip1 || !chip2);
-			
+
 			writel(CMD_READ_ARRAY, addr + 1);
-			
+
 			if (chip1 == ERR || chip2 == ERR) {
 				rc = ERR_PROG_ERROR;
 				goto outahere;
 			}
-			
+
 			if (chip1 == TMO) {
 				rc = ERR_TIMOUT;
 				goto outahere;
 			}
-			
+
 			printf("ok.\n");
 		} else { /* it was protected */
-			
+
 			printf("protected!\n");
 		}
 	}
-	
+
 	if (ctrlc()) {
 		printf("User Interrupt!\n");
 	}
@@ -290,11 +290,11 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 outahere:
 	/* allow flash to settle - wait 10 ms */
 	udelay(10000);
-	
+
 	if (iflag) {
 		enable_interrupts();
 	}
-	
+
 	return rc;
 }
 
@@ -309,7 +309,7 @@ volatile static int write_word(flash_info_t *info, ulong dest, ulong data)
 	int rc = ERR_OK;
 	int iflag;
 	int chip1, chip2;
-	
+
 	/*
 	 * Check if Flash is (sufficiently) erased
 	 */
@@ -317,7 +317,7 @@ volatile static int write_word(flash_info_t *info, ulong dest, ulong data)
 	if ((result & data) != data) {
 		return ERR_NOT_ERASED;
 	}
-	
+
 	/*
 	 * Disable interrupts which might cause a timeout
 	 * here. Remember that our exception vectors are
@@ -332,61 +332,61 @@ volatile static int write_word(flash_info_t *info, ulong dest, ulong data)
 	writel(CMD_UNLOCK_BYPASS, addr + 1);
 	writel(addr, CMD_PROGRAM);
 	writel(addr, data);
-	
+
 	/* arm simple, non interrupt dependent timer */
 	reset_timer();
-	
+
 	/* wait until flash is ready */
 	chip1 = chip2 = 0;
 	do {
 		result = readl(addr);
-		
+
 		/* check timeout */
 		if (get_timer(0) > CFG_FLASH_ERASE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
-		
+
 		if (!chip1 && ((result & 0x80) == (data & 0x80))) {
 			chip1 = READY;
 		}
-		
+
 		if (!chip1 && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
 			result = readl(addr);
-			
+
 			if ((result & 0x80) == (data & 0x80)) {
 				chip1 = READY;
 			} else {
 				chip1 = ERR;
 			}
 		}
-		
+
 		if (!chip2 && ((result & (0x80 << 16)) == (data & (0x80 << 16)))) {
 			chip2 = READY;
 		}
-		
+
 		if (!chip2 && ((result >> 16) & BIT_PROGRAM_ERROR)) {
 			result = readl(addr);
-			
+
 			if ((result & (0x80 << 16)) == (data & (0x80 << 16))) {
 				chip2 = READY;
 			} else {
 				chip2 = ERR;
 			}
 		}
-		
+
 	}  while (!chip1 || !chip2);
-	
+
 	writel(CMD_READ_ARRAY, addr);
-	
+
 	if (chip1 == ERR || chip2 == ERR || readl(addr) != data) {
 		rc = ERR_PROG_ERROR;
 	}
-	
+
 	if (iflag) {
 		enable_interrupts();
 	}
-	
+
 	return rc;
 }
 
@@ -399,9 +399,9 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	ulong cp, wp, data;
 	int l;
 	int i, rc;
-	
+
 	wp = (addr & ~3);	/* get lower word aligned address */
-	
+
 	/*
 	 * handle unaligned start bytes
 	 */
@@ -418,13 +418,13 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		for (; cnt==0 && i<4; ++i, ++cp) {
 			data = (data >> 8) | (*(uchar *)cp << 24);
 		}
-		
+
 		if ((rc = write_word(info, wp, data)) != 0) {
 			return rc;
 		}
 		wp += 4;
 	}
-	
+
 	/*
 	 * handle word aligned part
 	 */
@@ -437,11 +437,11 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp  += 4;
 		cnt -= 4;
 	}
-	
+
 	if (cnt == 0) {
 		return ERR_OK;
 	}
-	
+
 	/*
 	 * handle unaligned tail bytes
 	 */
@@ -453,6 +453,6 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	for (; i<4; ++i, ++cp) {
 		data = (data >> 8) | (*(uchar *)cp << 24);
 	}
-	
+
 	return write_word(info, wp, data);
 }
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index 50a49e601a..0fc836c629 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -1,5 +1,5 @@
 /*
- * 
+ *
  * (C) Copyright 2002
  * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
  *
@@ -40,11 +40,11 @@
 
 /* ------------------------------------------------------------------------- */
 
-	
-/* 
+
+/*
  * Theory:
  * We first set up all IRQs to be non-pci, edge triggered,
- * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets 
+ * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
  * called we reallocate irqs to the pci bus with sc520_pci_set_irq()
  * as needed. Whe choose the irqs to gram from a configurable list
  * inside pci_sc520_fixup_irq() (If this list contains stupid irq's
@@ -54,48 +54,48 @@
 static void irq_init(void)
 {
 	/* disable global interrupt mode */
-	write_mmcr_byte(SC520_PICICR, 0x40); 
-	
+	write_mmcr_byte(SC520_PICICR, 0x40);
+
 	/* set all irqs to edge */
 	write_mmcr_byte(SC520_MPICMODE, 0x00);
 	write_mmcr_byte(SC520_SL1PICMODE, 0x00);
 	write_mmcr_byte(SC520_SL2PICMODE, 0x00);
-	
-	/* active low polarity on PIC interrupt pins, 
+
+	/* active low polarity on PIC interrupt pins,
 	 *  active high polarity on all other irq pins */
 	write_mmcr_word(SC520_INTPINPOL, 0x0000);
 
 	/* set irq number mapping */
-	write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED);   /* disable GP timer 0 INT */       
+	write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED);   /* disable GP timer 0 INT */
 	write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED);   /* disable GP timer 1 INT */
 	write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED);   /* disable GP timer 2 INT */
-	write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0);             /* Set PIT timer 0 INT to IRQ0 */ 
+	write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0);             /* Set PIT timer 0 INT to IRQ0 */
 	write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED);     /* disable PIT timer 1 INT */
 	write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED);     /* disable PIT timer 2 INT */
 	write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED);  /* disable PCI INT A */
 	write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED);  /* disable PCI INT B */
 	write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED);  /* disable PCI INT C */
 	write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED);  /* disable PCI INT D */
-	write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ 
+	write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
 	write_mmcr_byte(SC520_SSIMAP, SC520_IRQ_DISABLED);      /* disable Synchronius serial INT */
 	write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED);      /* disable Watchdog INT */
 	write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8);              /* Set RTC int to 8 */
 	write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED);      /* disable write protect INT */
 	write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1);              /* Set ICE Debug Serielport INT to IRQ1 */
 	write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13);             /* Set FP error INT to IRQ13 */
-	
+
 	if (CFG_USE_SIO_UART) {
 		write_mmcr_byte(SC520_UART1MAP, SC520_IRQ_DISABLED); /* disable internal UART1 INT */
 		write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); /* disable internal UART2 INT */
-		write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3);          /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ 
+		write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3);          /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */
 		write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ4);          /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */
 	} else {
 		write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4);         /* Set internal UART2 INT to IRQ4 */
 		write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3);         /* Set internal UART2 INT to IRQ3 */
-		write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED);  /* disable GPIRQ3 (ISA IRQ3) */ 
+		write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED);  /* disable GPIRQ3 (ISA IRQ3) */
 		write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED);  /* disable GPIRQ4 (ISA IRQ4) */
 	}
-	
+
 	write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ1);             /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */
 	write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ5);             /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */
 	write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ6);             /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */
@@ -104,14 +104,14 @@ static void irq_init(void)
 	write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ9);             /* Set GPIRQ9 (ISA IRQ2) to IRQ9 */
 	write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ11);            /* Set GPIRQ0 (ISA IRQ11) to IRQ10 */
 	write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ12);            /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */
-	write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14);            /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */          
-	
+	write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14);            /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */
+
 	write_mmcr_word(SC520_PCIHOSTMAP, 0x11f);                /* Map PCI hostbridge INT to NMI */
 	write_mmcr_word(SC520_ECCMAP, 0x100);                    /* Map SDRAM ECC failure INT to NMI */
- 
+
 }
 
-	
+
 /* PCI stuff */
 static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 {
@@ -125,64 +125,63 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 		CFG_FORTH_PCI_IRQ
 	};
 	static int next_irq_index=0;
-	
-	char tmp_pin;	
+
+	char tmp_pin;
 	int pin;
-	
+
 	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
 	pin = tmp_pin;
-	
+
 	pin-=1; /* pci config space use 1-based numbering */
 	if (-1 == pin) {
 		return; /* device use no irq */
 	}
-	
-	
-       
+
+
 	/* map device number +  pin to a pin on the sc520 */
 	switch (PCI_DEV(dev)) {
 	case 20:
 		pin+=SC520_PCI_INTA;
 		break;
-		
+
 	case 19:
 		pin+=SC520_PCI_INTB;
 		break;
-		
+
 	case 18:
 		pin+=SC520_PCI_INTC;
 		break;
-		
+
 	case 17:
 		pin+=SC520_PCI_INTD;
 		break;
-		
-	default: 
+
+	default:
 		return;
 	}
-	
+
 	pin&=3; /* wrap around */
-	
+
 	if (sc520_pci_ints[pin] == -1) {
-		/* re-route one interrupt for us */		
+		/* re-route one interrupt for us */
 		if (next_irq_index > 3) {
 			return;
 		}
-		if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { 
+		if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
 			return;
 		}
 		next_irq_index++;
 	}
 
-	
+
 	if (-1 != sc520_pci_ints[pin]) {
-		pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 
+		pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
 					   sc520_pci_ints[pin]);
 	}
-	PRINTF("fixup_irq: device %d pin %c irq %d\n", 
+	PRINTF("fixup_irq: device %d pin %c irq %d\n",
 	       PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
 }
- 
+
 static struct pci_controller sc520_cdp_hose = {
 	fixup_irq: pci_sc520_cdp_fixup_irq,
 };
@@ -201,7 +200,7 @@ static void silence_uart(int port)
 void setup_ali_sio(int uart_primary)
 {
 	ali512x_init();
-	
+
 	ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0);
 	ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3);
 	ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4);
@@ -209,21 +208,21 @@ void setup_ali_sio(int uart_primary)
 	ali512x_set_rtc(ALI_DISABLED, 0, 0);
 	ali512x_set_kbc(ALI_ENABLED, 1, 12);
 	ali512x_set_cio(ALI_ENABLED);
-	
+
 	/* IrDa pins */
 	ali512x_cio_function(12, 1, 0, 0);
 	ali512x_cio_function(13, 1, 0, 0);
-	
+
 	/* SSI chip select pins */
 	ali512x_cio_function(14, 0, 0, 0);  /* SSI_CS */
-	ali512x_cio_function(15, 0, 0, 0);  /* SSI_MV */ 
+	ali512x_cio_function(15, 0, 0, 0);  /* SSI_MV */
 	ali512x_cio_function(16, 0, 0, 0);  /* SSI_SPI# */
 
 	/* Board REV pins */
 	ali512x_cio_function(20, 0, 0, 1);
 	ali512x_cio_function(21, 0, 0, 1);
 	ali512x_cio_function(22, 0, 0, 1);
-	ali512x_cio_function(23, 0, 0, 1);      
+	ali512x_cio_function(23, 0, 0, 1);
 }
 
 
@@ -232,54 +231,53 @@ static void bus_init(void)
 {
 
 	/* set up the GP IO pins */
-	write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); 	/* set the GPIO pin function 31-16 reg */		   
+	write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); 	/* set the GPIO pin function 31-16 reg */
 	write_mmcr_word(SC520_PIOPFS15_0, 0xffff);  	/* set the GPIO pin function 15-0 reg */
-	write_mmcr_byte(SC520_CSPFS, 0xf8);  		/* set the CS pin function  reg */	
+	write_mmcr_byte(SC520_CSPFS, 0xf8);  		/* set the CS pin function  reg */
 	write_mmcr_byte(SC520_CLKSEL, 0x70);
 
-	
-	write_mmcr_byte(SC520_GPCSRT, 1);   /* set the GP CS offset */    	
+
+	write_mmcr_byte(SC520_GPCSRT, 1);   /* set the GP CS offset */
 	write_mmcr_byte(SC520_GPCSPW, 3);   /* set the GP CS pulse width */
 	write_mmcr_byte(SC520_GPCSOFF, 1);  /* set the GP CS offset */
 	write_mmcr_byte(SC520_GPRDW, 3);    /* set the RD pulse width */
 	write_mmcr_byte(SC520_GPRDOFF, 1);  /* set the GP RD offset */
-        write_mmcr_byte(SC520_GPWRW, 3);    /* set the GP WR pulse width */
+	write_mmcr_byte(SC520_GPWRW, 3);    /* set the GP WR pulse width */
 	write_mmcr_byte(SC520_GPWROFF, 1);  /* set the GP WR offset */
 
-	write_mmcr_word(SC520_BOOTCSCTL, 0x1823);		/* set up timing of BOOTCS */ 
+	write_mmcr_word(SC520_BOOTCSCTL, 0x1823);		/* set up timing of BOOTCS */
 	write_mmcr_word(SC520_ROMCS1CTL, 0x1823);		/* set up timing of ROMCS1 */
-	write_mmcr_word(SC520_ROMCS2CTL, 0x1823);		/* set up timing of ROMCS2 */ 
-	
+	write_mmcr_word(SC520_ROMCS2CTL, 0x1823);		/* set up timing of ROMCS2 */
+
 	/* adjust the memory map:
 	 * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
 	 * and 256MB to 1G-128k  (0x1000000 - 0x37ffffff) is mapped to PCI mmio
-	 * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ 
-	
-		
-	
+	 * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
+
+
 	/* SRAM = GPCS3 128k @ d0000-effff*/
-	write_mmcr_long(SC520_PAR2,  0x4e00400d);		
-	
+	write_mmcr_long(SC520_PAR2,  0x4e00400d);
+
 	/* IDE0 = GPCS6 1f0-1f7 */
-	write_mmcr_long(SC520_PAR3,  0x380801f0);		
+	write_mmcr_long(SC520_PAR3,  0x380801f0);
 
 	/* IDE1 = GPCS7 3f6 */
-	write_mmcr_long(SC520_PAR4,  0x3c0003f6);		
+	write_mmcr_long(SC520_PAR4,  0x3c0003f6);
 	/* bootcs */
-	write_mmcr_long(SC520_PAR12, 0x8bffe800);		
+	write_mmcr_long(SC520_PAR12, 0x8bffe800);
 	/* romcs2 */
-	write_mmcr_long(SC520_PAR13, 0xcbfff000);		
+	write_mmcr_long(SC520_PAR13, 0xcbfff000);
 	/* romcs1 */
-	write_mmcr_long(SC520_PAR14, 0xabfff800);		
+	write_mmcr_long(SC520_PAR14, 0xabfff800);
 	/* 680 LEDS */
-	write_mmcr_long(SC520_PAR15, 0x30000640);		
-	
+	write_mmcr_long(SC520_PAR15, 0x30000640);
+
 	write_mmcr_byte(SC520_ADDDECCTL, 0);
-	
-	asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */	
+
+	asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
 
 	if (CFG_USE_SIO_UART) {
-		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);	
+		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);
 		setup_ali_sio(1);
 	} else {
 		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
@@ -321,21 +319,21 @@ static void bus_init(void)
  * PAR15  Port 0x680 LED display
  */
 
-/* 
+/*
  * This function should map a chunk of size bytes
  * of the system address space to the ISA bus
- * 
+ *
  * The function will return the memory address
  * as seen by the host (which may very will be the
  * same as the bus address)
  */
-u32 isa_map_rom(u32 bus_addr, int size) 
+u32 isa_map_rom(u32 bus_addr, int size)
 {
 	u32 par;
-	
-	PRINTF("isa_map_rom asked to map %d bytes at %x\n", 
+
+	PRINTF("isa_map_rom asked to map %d bytes at %x\n",
 	       size, bus_addr);
-	
+
 	par = size;
 	if (par < 0x80000) {
 		par = 0x80000;
@@ -346,12 +344,12 @@ u32 isa_map_rom(u32 bus_addr, int size)
 	par <<= 18;
 	par |= (bus_addr>>12);
 	par |= 0x50000000;
-	
+
 	PRINTF ("setting PAR11 to %x\n", par);
-	
+
 	/* Map rom 0x10000 with PAR1 */
 	write_mmcr_long(SC520_PAR11,  par);
-	
+
 	return bus_addr;
 }
 
@@ -372,19 +370,19 @@ void isa_unmap_rom(u32 addr)
 
 #ifdef CONFIG_PCI
 #define PCI_ROM_TEMP_SPACE 0x10000
-/* 
+/*
  * This function should map a chunk of size bytes
  * of the system address space to the PCI bus,
  * suitable to map PCI ROMS (bus address < 16M)
  * the function will return the host memory address
  * which should be converted into a bus address
- * before used to configure the PCI rom address 
+ * before used to configure the PCI rom address
  * decoder
  */
-u32 pci_get_rom_window(struct pci_controller *hose, int size) 
+u32 pci_get_rom_window(struct pci_controller *hose, int size)
 {
 	u32 par;
-	
+
 	par = size;
 	if (par < 0x80000) {
 		par = 0x80000;
@@ -395,12 +393,12 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size)
 	par <<= 14;
 	par |= (PCI_ROM_TEMP_SPACE>>16);
 	par |= 0x72000000;
-	
+
 	PRINTF ("setting PAR1 to %x\n", par);
-	
+
 	/* Map rom 0x10000 with PAR1 */
 	write_mmcr_long(SC520_PAR1,  par);
-	
+
 	return PCI_ROM_TEMP_SPACE;
 }
 
@@ -417,61 +415,61 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
 		return;
 	}
 	PRINTF(" not ours\n");
-	
+
 }
 
 /*
  * This function is called in order to provide acces to the
- * legacy video I/O ports on the PCI bus. 
- * After this function accesses to I/O ports 0x3b0-0x3bb and 
+ * legacy video I/O ports on the PCI bus.
+ * After this function accesses to I/O ports 0x3b0-0x3bb and
  * 0x3c0-0x3df shuld result in transactions on the PCI bus.
- * 
+ *
  */
 int pci_enable_legacy_video_ports(struct pci_controller *hose)
 {
 	/* Map video memory to 0xa0000*/
 	write_mmcr_long(SC520_PAR0,  0x7200400a);
-	
+
 	/* forward all I/O accesses to PCI */
-	write_mmcr_byte(SC520_ADDDECCTL, 
-			read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);	
-	
-	
+	write_mmcr_byte(SC520_ADDDECCTL,
+			read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
+
+
 	/* so we map away all io ports to pci (only way to access pci io
 	 * below 0x400. But then we have to map back the portions that we dont
 	 * use so that the generate cycles on the GPIO bus where the sio and
-	 * ISA slots are connected, this requre the use of several PAR registers 
+	 * ISA slots are connected, this requre the use of several PAR registers
 	 */
-	
+
 	/* bring 0x100 - 0x1ef back to ISA using PAR5 */
-	write_mmcr_long(SC520_PAR5, 0x30ef0100);		
-	
+	write_mmcr_long(SC520_PAR5, 0x30ef0100);
+
 	/* IDE use 1f0-1f7 */
-	
+
 	/* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */
-	write_mmcr_long(SC520_PAR6, 0x30ff01f8);		
-	
+	write_mmcr_long(SC520_PAR6, 0x30ff01f8);
+
 	/* com2 use 2f8-2ff */
-	
+
 	/* bring 0x300 - 0x3af back to ISA using PAR7 */
-	write_mmcr_long(SC520_PAR7, 0x30af0300);		
-	
+	write_mmcr_long(SC520_PAR7, 0x30af0300);
+
 	/* vga use 3b0-3bb */
-	
+
 	/* bring 0x3bc - 0x3bf back to ISA using PAR8 */
-	write_mmcr_long(SC520_PAR8, 0x300303bc);		
-	
+	write_mmcr_long(SC520_PAR8, 0x300303bc);
+
 	/* vga use 3c0-3df */
-	
+
 	/* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */
-	write_mmcr_long(SC520_PAR9, 0x301503e0);		
-	
+	write_mmcr_long(SC520_PAR9, 0x301503e0);
+
 	/* ide use 3f6 */
-	
+
 	/* bring 0x3f7  back to ISA using PAR10 */
-	write_mmcr_long(SC520_PAR10, 0x300003f7);		
-	
-	/* com1 use 3f8-3ff */		
+	write_mmcr_long(SC520_PAR10, 0x300003f7);
+
+	/* com1 use 3f8-3ff */
 
 	return 0;
 }
@@ -484,20 +482,20 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose)
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	
-	init_sc520();	
+
+	init_sc520();
 	bus_init();
 	irq_init();
-		
+
 	/* max drive current on SDRAM */
 	write_mmcr_word(SC520_DSCTL, 0x0100);
-		
+
 	/* enter debug mode after next reset (only if jumper is also set) */
 	write_mmcr_byte(SC520_RESCFG, 0x08);
 	/* configure the software timer to 33.333MHz */
 	write_mmcr_byte(SC520_SWTMRCFG, 0);
 	gd->bus_clk = 33333000;
-	
+
 	return 0;
 }
 
@@ -518,98 +516,96 @@ int last_stage_init(void)
 {
 	int minor;
 	int major;
-	
+
 	major = minor = 0;
 	major |= ali512x_cio_in(23)?2:0;
 	major |= ali512x_cio_in(22)?1:0;
 	minor |= ali512x_cio_in(21)?2:0;
 	minor |= ali512x_cio_in(20)?1:0;
-	
+
 	printf("AMD SC520 CDP revision %d.%d\n", major, minor);
-	
+
 	return 0;
 }
 
 
-
-void ssi_chip_select(int dev) 
+void ssi_chip_select(int dev)
 {
-	
+
 	/* Spunk board: SPI EEPROM is active-low, MW EEPROM and AUX are active high */
 	switch (dev) {
 	case 1: /* SPI EEPROM */
 		ali512x_cio_out(16, 0);
 		break;
-		
+
 	case 2: /* MW EEPROM */
 		ali512x_cio_out(15, 1);
 		break;
-		
-	case 3: /* AUX */				
+
+	case 3: /* AUX */
 		ali512x_cio_out(14, 1);
 		break;
-		
+
 	case 0:
 		ali512x_cio_out(16, 1);
 		ali512x_cio_out(15, 0);
 		ali512x_cio_out(14, 0);
 		break;
-		
+
 	default:
 		printf("Illegal SSI device requested: %d\n", dev);
 	}
 }
 
 
-void spi_init_f(void) 
+void spi_init_f(void)
 {
 #ifdef CONFIG_SC520_CDP_USE_SPI
-	spi_eeprom_probe(1); 
-#endif	
+	spi_eeprom_probe(1);
+#endif
 #ifdef CONFIG_SC520_CDP_USE_MW
 	mw_eeprom_probe(2);
-#endif		
+#endif
 }
 
-ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) 
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
 {
 	int offset;
 	int i;
 	ssize_t res;
-	
+
 	offset = 0;
 	for (i=0;i<alen;i++) {
 		offset <<= 8;
 		offset |= addr[i];
 	}
- 
+
 #ifdef CONFIG_SC520_CDP_USE_SPI
-	res = spi_eeprom_read(1, offset, buffer, len); 
-#endif	
+	res = spi_eeprom_read(1, offset, buffer, len);
+#endif
 #ifdef CONFIG_SC520_CDP_USE_MW
 	res = mw_eeprom_read(2, offset, buffer, len);
-#endif	
+#endif
 	return res;
 }
 
-ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) 
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 {
 	int offset;
 	int i;
 	ssize_t res;
-	
+
 	offset = 0;
 	for (i=0;i<alen;i++) {
 		offset <<= 8;
 		offset |= addr[i];
 	}
-		
+
 #ifdef CONFIG_SC520_CDP_USE_SPI
 	res = spi_eeprom_write(1, offset, buffer, len);
-#endif	
+#endif
 #ifdef CONFIG_SC520_CDP_USE_MW
 	res = mw_eeprom_write(2, offset, buffer, len);
-#endif	
+#endif
 	return res;
 }
-
diff --git a/board/sc520_cdp/sc520_cdp_asm.S b/board/sc520_cdp/sc520_cdp_asm.S
index 1e255fab2e..be7b2bb482 100644
--- a/board/sc520_cdp/sc520_cdp_asm.S
+++ b/board/sc520_cdp/sc520_cdp_asm.S
@@ -23,7 +23,7 @@
 
 /* now setup the General purpose bus to give us access to the LEDs.
  * We can then use the leds to display status information.
- */ 
+ */
 
 sc520_cdp_registers:
 /* size    offset        value */
@@ -45,12 +45,12 @@ sc520_cdp_registers:
 /* board early intialization */
 .globl early_board_init
 early_board_init:
-        movl    $sc520_cdp_registers,%esi
-init_loop:	
-        movl    $0xfffef000,%edi     /* MMCR base to edi */					
+	movl    $sc520_cdp_registers,%esi
+init_loop:
+	movl    $0xfffef000,%edi     /* MMCR base to edi */
 	movw	(%esi), %bx          /* load sizer to bx */
 	cmpw	$0, %bx              /* if sie is 0 we're done */
-	je	done 
+	je	done
 	xorl	%edx,%edx
 	movw	2(%esi), %dx        /* load MMCR offset to dx */
 	addl	%edx, %edi          /* add offset to base in edi */
@@ -61,7 +61,7 @@ init_loop:
 	je	word                 /* word op? */
 	movl	%eax, (%edi)         /* must be long, then */
 	jmp	next
-byte:   movb    %al,(%edi)        
+byte:   movb    %al,(%edi)
 	jmp	next
 word:	movw	%ax,(%edi)
 next:	addl	$8, %esi             /* advance esi */
@@ -83,4 +83,3 @@ __show_boot_progress:
 	movw	$0x680, %dx
 	out	%al, %dx
 	jmp	*%ebp
-	
diff --git a/board/sc520_cdp/sc520_cdp_asm16.S b/board/sc520_cdp/sc520_cdp_asm16.S
index 0e0b0c028a..a3e700a626 100644
--- a/board/sc520_cdp/sc520_cdp_asm16.S
+++ b/board/sc520_cdp/sc520_cdp_asm16.S
@@ -34,32 +34,32 @@
 board_init16:
 	/* Alias MMCR to 0xdf000 */
 	movw	$0xfffc, %dx
-	movl	$0x800df0cb, %eax	
-	outl	%eax, %dx		
-	
+	movl	$0x800df0cb, %eax
+	outl	%eax, %dx
+
 	/* Set ds to point to MMCR alias */
-	movw	$0xdf00, %ax		
-	movw	%ax, %ds		 
-		
-	/* Map the entire flash at 0x38000000  
+	movw	$0xdf00, %ax
+	movw	%ax, %ds
+
+	/* Map the entire flash at 0x38000000
 	 * (with BOOTCS and PAR14, use 0xabfff800 for ROMCS1) */
 	movl    $0xc0, %edi
-        movl	$0x8bfff800, %eax
-        movl	%eax, (%di)		
+	movl	$0x8bfff800, %eax
+	movl	%eax, (%di)
 
 	/* Disable SDRAM write buffer */
 	movw    $0x40,%di
-        xorw    %ax,%ax
-        movb    %al, (%di)              
+	xorw    %ax,%ax
+	movb    %al, (%di)
 
 	/* Disabe MMCR alias */
 	movw	$0xfffc, %dx
-	movl	$0x000000cb, %eax	
-	outl	%eax, %dx		
-	
+	movl	$0x000000cb, %eax
+	outl	%eax, %dx
+
 	/* the return address is tored in bp */
 	jmp	*%bp
-	
+
 
 .section .bios, "ax"
 .code16
@@ -67,18 +67,17 @@ board_init16:
 realmode_reset:
 	/* Alias MMCR to 0xdf000 */
 	movw	$0xfffc, %dx
-	movl	$0x800df0cb, %eax	
-	outl	%eax, %dx		
-	
+	movl	$0x800df0cb, %eax
+	outl	%eax, %dx
+
 	/* Set ds to point to MMCR alias */
-	movw	$0xdf00, %ax		
-	movw	%ax, %ds		 
-		
+	movw	$0xdf00, %ax
+	movw	%ax, %ds
+
 	/* issue software reset thorugh MMCR */
 	movl    $0xd72, %edi
-        movb	$0x01, %al
-        movb	%al, (%di)		
+	movb	$0x01, %al
+	movb	%al, (%di)
 
 1:	hlt
 	jmp	1
-	
diff --git a/board/sc520_cdp/u-boot.lds b/board/sc520_cdp/u-boot.lds
index fbab9b85f2..1944a74aaa 100644
--- a/board/sc520_cdp/u-boot.lds
+++ b/board/sc520_cdp/u-boot.lds
@@ -26,60 +26,65 @@ OUTPUT_ARCH(i386)
 ENTRY(_start)
 
 SECTIONS
-{	
+{
 	. = 0x387c0000;                     /* Where bootcode in the flash is mapped */
 	.text  : { *(.text); }
-	
-        . = ALIGN(4);
-        .rodata : { *(.rodata) }
 
-        . = 0x400000; 	                    /* Ram data segment to use */
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = 0x400000; 	                    /* Ram data segment to use */
 	_i386boot_romdata_dest = ABSOLUTE(.);
-        .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
-	_i386boot_romdata_start = LOADADDR(.data); 	
+	.data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
+	_i386boot_romdata_start = LOADADDR(.data);
 
-        . = ALIGN(4);
-        .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
-	_i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got); 	
+	. = ALIGN(4);
+	.got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
+	_i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
 
 
-        . = ALIGN(4);
+	. = ALIGN(4);
 	_i386boot_bss_start = ABSOLUTE(.);
-        .bss : { *(.bss) }	
+	.bss : { *(.bss) }
 	_i386boot_bss_size = SIZEOF(.bss);
-	
-	
+
+
 	/* 16bit realmode trampoline code */
 	.realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) }
-    
+
 	_i386boot_realmode = LOADADDR(.realmode);
 	_i386boot_realmode_size = SIZEOF(.realmode);
-	
+
 	/* 16bit BIOS emulation code (just enough to boot Linux) */
 	.bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
-    
+
 	_i386boot_bios = LOADADDR(.bios);
 	_i386boot_bios_size = SIZEOF(.bios);
-	
+
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
 
 	/* The load addresses below assumes that the flash
 	 * will be mapped so that 0x387f0000 == 0xffff0000
 	 * at reset time
 	 *
-	 * The fe00 and ff00 offsets of the start32 and start16 
+	 * The fe00 and ff00 offsets of the start32 and start16
 	 * segments are arbitrary, the just have to be mapped
 	 * at reset and the code have to fit.
 	 * The fff0 offset of reset is important, however.
 	 */
-	 
-	 
+
+
 	. = 0xfffffe00;
-	.start32 : AT (0x387ffe00) { *(.start32); } 
-	
+	.start32 : AT (0x387ffe00) { *(.start32); }
+
 	. = 0xff00;
-	.start16 : AT (0x387fff00) { *(.start16); }  
-	
+	.start16 : AT (0x387fff00) { *(.start16); }
+
 	. = 0xfff0;
-	.reset : AT (0x387ffff0) { *(.reset); }  
+	.reset : AT (0x387ffff0) { *(.reset); }
 	_i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) );
 }