diff options
| author | Wolfgang Denk <wd@denx.de> | 2009-05-24 17:06:54 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-06-12 20:47:16 +0200 |
| commit | a89c33db96a1e55319a286dd4c3c05ca64ac6bfd (patch) | |
| tree | 512938dbd159b7262aad30e4304cfc05c350226c /board/hymod | |
| parent | 94796d8544d4248028141bad11c6a74b840e9d6e (diff) | |
| download | u-boot-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.tar.gz u-boot-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.tar.xz u-boot-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.zip | |
General help message cleanup
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.
Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.
This patch cleans this up - for example:
Before:
=> help dtt
dtt - Digital Thermometer and Thermostat
Usage:
dtt - Read temperature from digital thermometer and thermostat.
After:
=> help dtt
dtt - Read temperature from Digital Thermometer and Thermostat
Usage:
dtt
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'board/hymod')
| -rw-r--r-- | board/hymod/bsp.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 092d368440..262070fdff 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -297,7 +297,7 @@ U_BOOT_CMD( "fpga info\n" " - print information about the Hymod FPGA, namely the\n" " memory addresses at which the four FPGA local bus\n" - " address spaces appear in the physical address space\n" + " address spaces appear in the physical address space" ); /* ------------------------------------------------------------------------- */ int @@ -340,7 +340,7 @@ U_BOOT_CMD( "[type]\n" " - write zeroes into the EEPROM on the board of type `type'\n" " (`type' is either `main' or `mezz' - default `main')\n" - " Note: the EEPROM write enable jumper must be installed\n" + " Note: the EEPROM write enable jumper must be installed" ); /* ------------------------------------------------------------------------- */ |