MPC8308RDB: minimal support for devboard from Freescale

This patch provides support for MPC8308RDB development board from
Freescale with a minimal set of features:
 Dual UART is supported
 NOR flash is supported
 Both TSEC Ethernet controllers are supported
 PCI Express initialization is supported

The following features are enabled in configuration but not fully tested:
 I2C (used to get the board revision)
 I2C-connected RTC
 VSC7385 switch

There is one (hopefully) minor issue: on soft reset the board sometimes
resets twice. I've not managed to find the fix for this problem yet.
As a workaround instruction cache can be disabled.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/MAKEALL b/MAKEALL
index 463739069d..e7651dc462 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -360,6 +360,7 @@ LIST_8260="		\
 LIST_83xx="		\
 	caddy2		\
 	kmeter1		\
+	MPC8308RDB	\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\