diff options
| author | Ian Campbell <ijc@hellion.org.uk> | 2014-04-18 19:05:47 +0100 |
|---|---|---|
| committer | Dennis Gilmore <dennis@ausil.us> | 2014-04-25 17:08:11 -0500 |
| commit | 4b39387594767ac865caa8710d1be39e869926e3 (patch) | |
| tree | f438f904fed516d8385c7473e725e194d140b7e1 | |
| parent | b2c413d8119dbbef34189e9beb84a0b2a00fa86d (diff) | |
| download | u-boot-4b39387594767ac865caa8710d1be39e869926e3.tar.gz u-boot-4b39387594767ac865caa8710d1be39e869926e3.tar.xz u-boot-4b39387594767ac865caa8710d1be39e869926e3.zip | |
sunxi: add gmac Ethernet support
Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i)
processors. Enable for the Cubietruck.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/board.c | 15 | ||||
| -rw-r--r-- | boards.cfg | 2 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/sunxi_gmac.c | 34 | ||||
| -rw-r--r-- | include/configs/sunxi-common.h | 26 | ||||
| -rw-r--r-- | include/netdev.h | 1 |
6 files changed, 78 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index b5c0cb7487..9755320d07 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -11,6 +11,8 @@ */ #include <common.h> +#include <netdev.h> +#include <miiphy.h> #include <serial.h> #ifdef CONFIG_SPL_BUILD #include <spl.h> @@ -86,3 +88,16 @@ void enable_caches(void) dcache_enable(); } #endif + +#if defined(CONFIG_SUNXI_GMAC) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + sunxi_gmac_initialize(bis); + + return 0; +} +#endif diff --git a/boards.cfg b/boards.cfg index 306f891047..ddc3c86005 100644 --- a/boards.cfg +++ b/boards.cfg @@ -372,7 +372,7 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega <m.zalega@samsung.com> Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com> Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - -Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org> Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 7f9ce90a6d..2300c00fc1 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SH_ETHER) += sh_eth.o obj-$(CONFIG_SMC91111) += smc91111.o obj-$(CONFIG_SMC911X) += smc911x.o obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o +obj-$(CONFIG_SUNXI_GMAC) += sunxi_gmac.o obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o diff --git a/drivers/net/sunxi_gmac.c b/drivers/net/sunxi_gmac.c new file mode 100644 index 0000000000..15cd1fba89 --- /dev/null +++ b/drivers/net/sunxi_gmac.c @@ -0,0 +1,34 @@ +#include <common.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> + +int sunxi_gmac_initialize(bd_t *bis) +{ + int pin; + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); + + /* Set MII clock */ + setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | + CCM_GMAC_CTRL_GPIT_RGMII); + + /* Configure pin mux settings for GMAC */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { + /* skip unused pins in RGMII mode */ + if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) + continue; + sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + + designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); + + return 0; +} diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3f7e314a8b..b76c3b01ac 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -127,6 +127,32 @@ #define CONFIG_CONS_INDEX 1 /* UART0 */ +#ifdef CONFIG_SUNXI_GMAC +#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ +#define CONFIG_PHY_ADDR 1 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_PHYLIB +#endif + +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_TIMESTAMP /* Needed by SNTP */ +#define CONFIG_CMD_DNS +#define CONFIG_NETCONSOLE +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET +#define CONFIG_BOOTP_MAY_FAIL +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \ diff --git a/include/netdev.h b/include/netdev.h index 32b5073ef0..fc4a2f85ff 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -79,6 +79,7 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); +int sunxi_gmac_initialize(bd_t *bis); int sunxi_wemac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); |