Merge branch 'master' of git://www.denx.de/git/u-boot-arm

58 files changed, 4013 insertions, 199 deletions

diff --git a/MAKEALL b/MAKEALL
index c026b05c1a..6728d3f6e3 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -486,6 +486,7 @@ LIST_ARM9="			\
 	davinci_dvevm		\
 	davinci_schmoogie	\
 	davinci_sonata		\
+	pmdra			\
 "
 
 #########################################################################
@@ -503,6 +504,9 @@ LIST_ARM11="		\
 	cp1136		\
 	omap2420h4	\
 	apollon		\
+	imx31_litekit	\
+	imx31_phycore	\
+	mx31ads		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 890c0972fe..4c07c2e691 100644
--- a/Makefile
+++ b/Makefile
@@ -2382,6 +2382,9 @@ davinci_schmoogie_config :	unconfig
 davinci_sonata_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
 
+pmdra_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci
+
 omap1610inn_config \
 omap1610inn_cs0boot_config \
 omap1610inn_cs3boot_config \
@@ -2592,14 +2595,23 @@ zylonite_config :
 ## ARM1136 Systems
 #########################################################################
 omap2420h4_config	: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
+	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
 
 apollon_config		: unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
-	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
+	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
 
+imx31_litekit_config	: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+
+imx31_phycore_config	: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+
+mx31ads_config		: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
+
 #========================================================================
 # i386
 #========================================================================
diff --git a/board/imx31_litekit/Makefile b/board/imx31_litekit/Makefile
new file mode 100644
index 0000000000..aaaec69d6a
--- /dev/null
+++ b/board/imx31_litekit/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= imx31_litekit.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#######################################################################
+##
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/imx31_litekit/config.mk b/board/imx31_litekit/config.mk
new file mode 100644
index 0000000000..d34dc02d96
--- /dev/null
+++ b/board/imx31_litekit/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x87f00000
diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c
new file mode 100644
index 0000000000..8c6e6f5a9e
--- /dev/null
+++ b/board/imx31_litekit/imx31_litekit.c
@@ -0,0 +1,65 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
+	__REG(CSCR_L(0)) = 0xa0330d01;
+	__REG(CSCR_A(0)) = 0x00220800;
+
+	__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
+	__REG(CSCR_L(4)) = 0x444a4541;
+	__REG(CSCR_A(4)) = 0x44443302;
+
+	/* setup pins for UART1 */
+	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+	gd->bd->bi_arch_number = 447;		/* board id for linux */
+	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: i.MX31 Litekit\n");
+	return 0;
+}
diff --git a/board/imx31_litekit/lowlevel_init.S b/board/imx31_litekit/lowlevel_init.S
new file mode 100644
index 0000000000..74d60678fd
--- /dev/null
+++ b/board/imx31_litekit/lowlevel_init.S
@@ -0,0 +1,103 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	strb r3, [r2]
+.endm
+
+.macro DELAY loops
+	ldr r2, =\loops
+1:
+	subs	r2, r2, #1
+	nop
+	bcs 1b
+.endm
+
+.globl lowlevel_init
+lowlevel_init:
+
+	REG	IPU_CONF, IPU_CONF_DI_EN
+	REG	CCM_CCMR, 0x074B0BF5
+
+	DELAY 0x40000
+
+	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE
+	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+	REG	CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) |	\
+				PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) |	\
+				PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) |	\
+				PDR0_MCU_PODF(0)
+
+	REG	CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) |	\
+							PLL_MFN(0x23)
+	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
+
+	REG	0x43FAC26C, 0 /* SDCLK */
+	REG	0x43FAC270, 0 /* CAS */
+	REG	0x43FAC274, 0 /* RAS */
+	REG	0x43FAC27C, 0x1000 /* CS2 	CSD0) */
+	REG	0x43FAC284, 0 /* DQM3 */
+		/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
+	REG	0x43FAC288, 0
+	REG	0x43FAC28C, 0
+	REG	0x43FAC290, 0
+	REG	0x43FAC294, 0
+	REG	0x43FAC298, 0
+	REG	0x43FAC29C, 0
+	REG	0x43FAC2A0, 0
+	REG	0x43FAC2A4, 0
+	REG	0x43FAC2A8, 0
+	REG	0x43FAC2AC, 0
+	REG	0x43FAC2B0, 0
+	REG	0x43FAC2B4, 0
+	REG	0x43FAC2B8, 0
+	REG	0x43FAC2BC, 0
+	REG	0x43FAC2C0, 0
+	REG	0x43FAC2C4, 0
+	REG	0x43FAC2C8, 0
+	REG	0x43FAC2CC, 0
+	REG	0x43FAC2D0, 0
+	REG	0x43FAC2D4, 0
+	REG	0x43FAC2D8, 0
+	REG	0x43FAC2DC, 0
+	REG	0xB8001010, 0x00000004
+	REG	0xB8001004, 0x006ac73a
+	REG	0xB8001000, 0x92100000
+	REG	0x80000f00, 0x12344321
+	REG	0xB8001000, 0xa2100000
+	REG	0x80000000, 0x12344321
+	REG	0x80000000, 0x12344321
+	REG	0xB8001000, 0xb2100000
+	REG8	0x80000033, 0xda
+	REG8	0x81000000, 0xff
diff --git a/board/imx31_litekit/u-boot.lds b/board/imx31_litekit/u-boot.lds
new file mode 100644
index 0000000000..1460adcdd8
--- /dev/null
+++ b/board/imx31_litekit/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	   :
+	{
+	  cpu/arm1136/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/imx31_phycore/Makefile b/board/imx31_phycore/Makefile
new file mode 100644
index 0000000000..de37ccaa89
--- /dev/null
+++ b/board/imx31_phycore/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= imx31_phycore.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/imx31_phycore/config.mk b/board/imx31_phycore/config.mk
new file mode 100644
index 0000000000..d34dc02d96
--- /dev/null
+++ b/board/imx31_phycore/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x87f00000
diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
new file mode 100644
index 0000000000..85fdc25308
--- /dev/null
+++ b/board/imx31_phycore/imx31_phycore.c
@@ -0,0 +1,73 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
+	__REG(CSCR_L(0)) = 0x10000d03;
+	__REG(CSCR_A(0)) = 0x00720900;
+
+	__REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
+	__REG(CSCR_L(1)) = 0x444a4541;
+	__REG(CSCR_A(1)) = 0x44443302;
+
+	__REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
+	__REG(CSCR_L(4)) = 0x22252521;
+	__REG(CSCR_A(4)) = 0x22220a00;
+
+	/* setup pins for UART1 */
+	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+	/* setup pins for I2C2 (for EEPROM, RTC) */
+	mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
+	mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SCL);
+
+	gd->bd->bi_arch_number = 447;		/* board id for linux */
+	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: Phytec phyCore i.MX31\n");
+	return 0;
+}
diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S
new file mode 100644
index 0000000000..b0a5389181
--- /dev/null
+++ b/board/imx31_phycore/lowlevel_init.S
@@ -0,0 +1,105 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	strb r3, [r2]
+.endm
+
+.macro DELAY loops
+	ldr r2, =\loops
+1:
+	subs	r2, r2, #1
+	nop
+	bcs 1b
+.endm
+
+.globl lowlevel_init
+lowlevel_init:
+
+	REG	IPU_CONF, IPU_CONF_DI_EN
+	REG	CCM_CCMR, 0x074B0BF5
+
+	DELAY 0x40000
+
+	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE
+	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+	REG	CCM_PDR0, PDR0_CSI_PODF(0xff1) | PDR0_PER_PODF(7) |	\
+			PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) |		\
+			PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) |		\
+			PDR0_MCU_PODF(0)
+
+	REG	CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd)
+
+	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1)
+
+	REG	0x43FAC26C, 0 /* SDCLK */
+	REG	0x43FAC270, 0 /* CAS */
+	REG	0x43FAC274, 0 /* RAS */
+	REG	0x43FAC27C, 0x1000 /* CS2 	CSD0) */
+	REG	0x43FAC284, 0 /* DQM3 */
+		/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
+	REG	0x43FAC288, 0
+	REG	0x43FAC28C, 0
+	REG	0x43FAC290, 0
+	REG	0x43FAC294, 0
+	REG	0x43FAC298, 0
+	REG	0x43FAC29C, 0
+	REG	0x43FAC2A0, 0
+	REG	0x43FAC2A4, 0
+	REG	0x43FAC2A8, 0
+	REG	0x43FAC2AC, 0
+	REG	0x43FAC2B0, 0
+	REG	0x43FAC2B4, 0
+	REG	0x43FAC2B8, 0
+	REG	0x43FAC2BC, 0
+	REG	0x43FAC2C0, 0
+	REG	0x43FAC2C4, 0
+	REG	0x43FAC2C8, 0
+	REG	0x43FAC2CC, 0
+	REG	0x43FAC2D0, 0
+	REG	0x43FAC2D4, 0
+	REG	0x43FAC2D8, 0
+	REG	0x43FAC2DC, 0
+	REG	0xB8001010, 0x00000004
+	REG	0xB8001004, 0x006ac73a
+	REG	0xB8001000, 0x92100000
+	REG	0x80000f00, 0x12344321
+	REG	0xB8001000, 0xa2100000
+	REG	0x80000000, 0x12344321
+	REG	0x80000000, 0x12344321
+	REG	0xB8001000, 0xb2100000
+	REG8	0x80000033, 0xda
+	REG8	0x81000000, 0xff
+	REG	0xB8001000, 0x82226080
+	REG	0x80000000, 0xDEADBEEF
diff --git a/board/imx31_phycore/u-boot.lds b/board/imx31_phycore/u-boot.lds
new file mode 100644
index 0000000000..1460adcdd8
--- /dev/null
+++ b/board/imx31_phycore/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	   :
+	{
+	  cpu/arm1136/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/mx31ads/Makefile b/board/mx31ads/Makefile
new file mode 100644
index 0000000000..c854e0577d
--- /dev/null
+++ b/board/mx31ads/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000-2008
+# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= mx31ads.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mx31ads/config.mk b/board/mx31ads/config.mk
new file mode 100644
index 0000000000..d34dc02d96
--- /dev/null
+++ b/board/mx31ads/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x87f00000
diff --git a/board/mx31ads/lowlevel_init.S b/board/mx31ads/lowlevel_init.S
new file mode 100644
index 0000000000..bc05b43a32
--- /dev/null
+++ b/board/mx31ads/lowlevel_init.S
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	strb r3, [r2]
+.endm
+
+.macro DELAY loops
+	ldr r2, =\loops
+1:
+	subs	r2, r2, #1
+	nop
+	bcs 1b
+.endm
+
+/* RedBoot: AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.*/
+.macro init_aips
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	ldr r0, =0x43F00000
+	ldr r1, =0x77777777
+	str r1, [r0, #0x00]
+	str r1, [r0, #0x04]
+	ldr r0, =0x53F00000
+	str r1, [r0, #0x00]
+	str r1, [r0, #0x04]
+
+	/*
+	 * Clear the on and off peripheral modules Supervisor Protect bit
+	 * for SDMA to access them. Did not change the AIPS control registers
+	 * (offset 0x20) access type
+	 */
+	ldr r0, =0x43F00000
+	ldr r1, =0x0
+	str r1, [r0, #0x40]
+	str r1, [r0, #0x44]
+	str r1, [r0, #0x48]
+	str r1, [r0, #0x4C]
+	ldr r1, [r0, #0x50]
+	and r1, r1, #0x00FFFFFF
+	str r1, [r0, #0x50]
+
+	ldr r0, =0x53F00000
+	ldr r1, =0x0
+	str r1, [r0, #0x40]
+	str r1, [r0, #0x44]
+	str r1, [r0, #0x48]
+	str r1, [r0, #0x4C]
+	ldr r1, [r0, #0x50]
+	and r1, r1, #0x00FFFFFF
+	str r1, [r0, #0x50]
+.endm /* init_aips */
+
+/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */
+.macro init_max
+	ldr r0, =0x43F04000
+	/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
+	ldr r1, =0x00302154
+	str r1, [r0, #0x000]        /* for S0 */
+	str r1, [r0, #0x100]        /* for S1 */
+	str r1, [r0, #0x200]        /* for S2 */
+	str r1, [r0, #0x300]        /* for S3 */
+	str r1, [r0, #0x400]        /* for S4 */
+	/* SGPCR - always park on last master */
+	ldr r1, =0x10
+	str r1, [r0, #0x010]        /* for S0 */
+	str r1, [r0, #0x110]        /* for S1 */
+	str r1, [r0, #0x210]        /* for S2 */
+	str r1, [r0, #0x310]        /* for S3 */
+	str r1, [r0, #0x410]        /* for S4 */
+	/* MGPCR - restore default values */
+	ldr r1, =0x0
+	str r1, [r0, #0x800]        /* for M0 */
+	str r1, [r0, #0x900]        /* for M1 */
+	str r1, [r0, #0xA00]        /* for M2 */
+	str r1, [r0, #0xB00]        /* for M3 */
+	str r1, [r0, #0xC00]        /* for M4 */
+	str r1, [r0, #0xD00]        /* for M5 */
+.endm /* init_max */
+
+/* RedBoot: M3IF setup */
+.macro init_m3if
+	/* Configure M3IF registers */
+	ldr r1, =0xB8003000
+	/*
+	* M3IF Control Register (M3IFCTL)
+	* MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[1] = L2CC1 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[2] = MBX not on priority list (0 << 0)	= 0x00000000
+	* MRRP[3] = MAX1 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[4] = SDMA not on priority list (0 << 0)	= 0x00000000
+	* MRRP[5] = MPEG4 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[6] = IPU1 on priority list (1 << 6)	= 0x00000040
+	* MRRP[7] = IPU2 not on priority list (0 << 0)	= 0x00000000
+	*						------------
+	*						  0x00000040
+	*/
+	ldr r0, =0x00000040
+	str r0, [r1]  /* M3IF control reg */
+.endm /* init_m3if */
+
+/* RedBoot: To support 133MHz DDR */
+.macro  init_drive_strength
+	/*
+	 * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits
+	 * in SW_PAD_CTL registers
+	 */
+
+	/* SDCLK */
+	ldr r1, =0x43FAC200
+	ldr r0, [r1, #0x6C]
+	bic r0, r0, #(1 << 12)
+	str r0, [r1, #0x6C]
+
+	/* CAS */
+	ldr r0, [r1, #0x70]
+	bic r0, r0, #(1 << 22)
+	str r0, [r1, #0x70]
+
+	/* RAS */
+	ldr r0, [r1, #0x74]
+	bic r0, r0, #(1 << 2)
+	str r0, [r1, #0x74]
+
+	/* CS2 (CSD0) */
+	ldr r0, [r1, #0x7C]
+	bic r0, r0, #(1 << 22)
+	str r0, [r1, #0x7C]
+
+	/* DQM3 */
+	ldr r0, [r1, #0x84]
+	bic r0, r0, #(1 << 22)
+	str r0, [r1, #0x84]
+
+	/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
+	ldr r2, =22	/* (0x2E0 - 0x288) / 4 = 22 */
+pad_loop:
+	ldr r0, [r1, #0x88]
+	bic r0, r0, #(1 << 22)
+	bic r0, r0, #(1 << 12)
+	bic r0, r0, #(1 << 2)
+	str r0, [r1, #0x88]
+	add r1, r1, #4
+	subs r2, r2, #0x1
+	bne pad_loop
+.endm /* init_drive_strength */
+
+/* CPLD on CS4 setup */
+.macro init_cs4
+	ldr r0, =WEIM_BASE
+	ldr r1, =0x0000D843
+	str r1, [r0, #0x40]
+	ldr r1, =0x22252521
+	str r1, [r0, #0x44]
+	ldr r1, =0x22220A00
+	str r1, [r0, #0x48]
+.endm /* init_cs4 */
+
+.globl lowlevel_init
+lowlevel_init:
+
+	/* Redboot initializes very early AIPS, what for?
+	 * Then it also initializes Multi-Layer AHB Crossbar Switch,
+	 * M3IF */
+	/* Also setup the Peripheral Port Remap register inside the core */
+	ldr r0, =0x40000015        /* start from AIPS 2GB region */
+	mcr p15, 0, r0, c15, c2, 4
+
+	init_aips
+
+	init_max
+
+	init_m3if
+
+	init_drive_strength
+
+	init_cs4
+
+	/* Image Processing Unit: */
+	/* Too early to switch display on? */
+	/* Switch on Display Interface */
+	REG	IPU_CONF, IPU_CONF_DI_EN
+	/* Clock Control Module: */
+	/* Use CKIH, MCU PLL off */
+	REG	CCM_CCMR, 0x074B0BF5
+
+	DELAY 0x40000
+	/* MCU PLL on */
+	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE
+	/* Switch to MCU PLL */
+	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+	/* PBC CPLD on CS4 */
+	mov	r1, #CS4_BASE
+	ldrh	r1, [r1, #0x2]
+	/* Is 27MHz switch set? */
+	ands	r1, r1, #0x16
+
+	/* 532-133-66.5 */
+	ldr	r0, =CCM_BASE
+	ldr	r1, =0xFF871D58
+	/* PDR0 */
+	str	r1, [r0, #0x4]
+	ldreq	r1, MPCTL_PARAM_532
+	ldrne	r1, MPCTL_PARAM_532_27
+	/* MPCTL */
+	str	r1, [r0, #0x10]
+
+	/* Set UPLL=240MHz, USB=60MHz */
+	ldr	r1, =0x49FCFE7F
+	/* PDR1 */
+	str	r1, [r0, #0x8]
+	ldreq	r1, UPCTL_PARAM_240
+	ldrne	r1, UPCTL_PARAM_240_27
+	/* UPCTL */
+	str	r1, [r0, #0x14]
+	/* default CLKO to 1/8 of the ARM core */
+	mov	r1, #0x000002C0
+	add	r1, r1, #0x00000006
+	/* COSR */
+	str	r1, [r0, #0x1c]
+
+	/* RedBoot sets 0x1ff, 7, 3, 5, 1, 3, 0 */
+/*	REG	CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) |	\
+			PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) |	\
+			PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) |	\
+			PDR0_MCU_PODF(0)*/
+
+	/* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */
+/*	REG	CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) |	\
+						PLL_MFN(0x23)*/
+	/* Default: 1, 4, 12, 1 */
+	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
+
+	/* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
+	REG	0xB8001010, 0x00000004
+	REG	0xB8001004, 0x006ac73a
+	REG	0xB8001000, 0x92100000
+	REG	0x80000f00, 0x12344321
+	REG	0xB8001000, 0xa2100000
+	REG	0x80000000, 0x12344321
+	REG	0x80000000, 0x12344321
+	REG	0xB8001000, 0xb2100000
+	REG8	0x80000033, 0xda
+	REG8	0x81000000, 0xff
+	REG	0xB8001000, 0x82226080
+	REG	0x80000000, 0xDEADBEEF
+	REG	0xB8001010, 0x0000000c
+
+	mov	pc, lr
+
+MPCTL_PARAM_532:
+	.word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0))
+MPCTL_PARAM_532_27:
+	.word (((1-1) << 26) + ((15-1) << 16) + (9  << 10) + (13 << 0))
+UPCTL_PARAM_240:
+	.word (((2-1) << 26) + ((13-1) << 16) + (9  << 10) + (3  << 0))
+UPCTL_PARAM_240_27:
+	.word (((2-1) << 26) + ((9 -1) << 16) + (8  << 10) + (8  << 0))
diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
new file mode 100644
index 0000000000..fe26b73183
--- /dev/null
+++ b/board/mx31ads/mx31ads.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	int i;
+#if 0
+	/* CS0: Nor Flash */
+	/*
+	 * These are values from the RedBoot sources by Freescale. However,
+	 * under U-Boot with this configuration 32-bit accesses don't work,
+	 * lower 16 bits of data are read twice for each 32-bit read.
+	 */
+	__REG(CSCR_U(0)) = 0x23524E80;
+	__REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
+					* disabling it doesn't help either */
+	__REG(CSCR_A(0)) = 0x00720900;
+#endif
+
+	/* setup pins for UART1 */
+	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+	/* PBC setup */
+	/* Enable UART transceivers also reset the Ethernet/external UART */
+	readw(CS4_BASE + 4);
+
+	writew(0x8023, CS4_BASE + 4);
+
+	/* RedBoot also has an empty loop with 100000 iterations here -
+	 * clock doesn't run yet */
+	for (i = 0; i < 100000; i++)
+		;
+
+	/* Clear the reset, toggle the LEDs */
+	writew(0xDF, CS4_BASE + 6);
+
+	/* clock still doesn't run */
+	for (i = 0; i < 100000; i++)
+		;
+
+	/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
+	readb(CS4_BASE + 8);
+	readb(CS4_BASE + 7);
+	readb(CS4_BASE + 8);
+	readb(CS4_BASE + 7);
+
+	gd->bd->bi_arch_number = 447;		/* board id for linux */
+	gd->bd->bi_boot_params = 0x80000100;	/* adress of boot parameters */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: MX31ADS\n");
+	return 0;
+}
diff --git a/board/mx31ads/u-boot.lds b/board/mx31ads/u-boot.lds
new file mode 100644
index 0000000000..1460adcdd8
--- /dev/null
+++ b/board/mx31ads/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	   :
+	{
+	  cpu/arm1136/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/prodrive/pmdra/Makefile b/board/prodrive/pmdra/Makefile
new file mode 100644
index 0000000000..564e30e0a9
--- /dev/null
+++ b/board/prodrive/pmdra/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= pmdra.o
+SOBJS	:= board_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/prodrive/pmdra/board_init.S b/board/prodrive/pmdra/board_init.S
new file mode 100644
index 0000000000..3e4ef7c338
--- /dev/null
+++ b/board/prodrive/pmdra/board_init.S
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2008 Prodrive B.V.
+ *
+ * Board-specific low level initialization code. Called at the very end
+ * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * initialization required.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl	dv_board_init
+dv_board_init:
+
+	mov	pc, lr
diff --git a/board/prodrive/pmdra/config.mk b/board/prodrive/pmdra/config.mk
new file mode 100644
index 0000000000..aa89d0ec8a
--- /dev/null
+++ b/board/prodrive/pmdra/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Swaminathan <swami.iyer@ti.com>
+#
+# Davinci EVM board (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# Davinci EVM has 1 bank of 256 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 9000'0000
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# Visioneering Corp. Sonata board (ARM926EJS) cpu
+#
+# Sonata board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
+#
+# Schmoogie board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+# we load ourself to 8108 '0000
+#
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/prodrive/pmdra/pmdra.c b/board/prodrive/pmdra/pmdra.c
new file mode 100644
index 0000000000..42f7770e44
--- /dev/null
+++ b/board/prodrive/pmdra/pmdra.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * ---------------------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ---------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+#define MACH_TYPE_DAVINCI_EVM		901
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void	timer_init(void);
+extern int	eth_hw_init(void);
+extern phy_t	phy;
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+	dv_reg_p	mdstat, mdctl;
+
+	if (id >= DAVINCI_LPSC_GEM)
+		return;			/* Don't work on DSP Power Domain */
+
+	mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+	mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+	while (REG(PSC_PTSTAT) & 0x01) {; }
+
+	if ((*mdstat & 0x1f) == 0x03)
+		return;			/* Already on and enabled */
+
+	*mdctl |= 0x03;
+
+	/* Special treatment for some modules as for sprue14 p.7.4.2 */
+	if ((id == DAVINCI_LPSC_VPSSSLV) ||
+	    (id == DAVINCI_LPSC_EMAC) ||
+	    (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
+	    (id == DAVINCI_LPSC_MDIO) ||
+	    (id == DAVINCI_LPSC_USB) ||
+	    (id == DAVINCI_LPSC_ATA) ||
+	    (id == DAVINCI_LPSC_VLYNQ) ||
+	    (id == DAVINCI_LPSC_UHPI) ||
+	    (id == DAVINCI_LPSC_DDR_EMIF) ||
+	    (id == DAVINCI_LPSC_AEMIF) ||
+	    (id == DAVINCI_LPSC_MMC_SD) ||
+	    (id == DAVINCI_LPSC_MEMSTICK) ||
+	    (id == DAVINCI_LPSC_McBSP) ||
+	    (id == DAVINCI_LPSC_GPIO))
+		*mdctl |= 0x200;
+
+	REG(PSC_PTCMD) = 0x01;
+
+	while (REG(PSC_PTSTAT) & 0x03) {; }
+	while ((*mdstat & 0x1f) != 0x03) {; }	/* Probably an overkill... */
+}
+
+void dsp_on(void)
+{
+	int	i;
+
+	if (REG(PSC_PDSTAT1) & 0x1f)
+		return;			/* Already on */
+
+	REG(PSC_GBLCTL) |= 0x01;
+	REG(PSC_PDCTL1) |= 0x01;
+	REG(PSC_PDCTL1) &= ~0x100;
+	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+	REG(PSC_PTCMD) = 0x02;
+
+	for (i = 0; i < 100; i++) {
+		if (REG(PSC_EPCPR) & 0x02)
+			break;
+	}
+
+	REG(PSC_CHP_SHRTSW) = 0x01;
+	REG(PSC_PDCTL1) |= 0x100;
+	REG(PSC_EPCCR) = 0x02;
+
+	for (i = 0; i < 100; i++) {
+		if (!(REG(PSC_PTSTAT) & 0x02))
+			break;
+	}
+
+	REG(PSC_GBLCTL) &= ~0x1f;
+}
+
+
+int board_init(void)
+{
+	/* arch number of the board */
+	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+	/* Workaround for TMS320DM6446 errata 1.3.22 */
+	REG(PSC_SILVER_BULLET) = 0;
+
+	/* Power on required peripherals */
+	lpsc_on(DAVINCI_LPSC_EMAC);
+	lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+	lpsc_on(DAVINCI_LPSC_MDIO);
+	lpsc_on(DAVINCI_LPSC_I2C);
+	lpsc_on(DAVINCI_LPSC_UART0);
+	lpsc_on(DAVINCI_LPSC_UART2);
+	lpsc_on(DAVINCI_LPSC_TIMER1);
+	lpsc_on(DAVINCI_LPSC_GPIO);
+
+	/* Powerup the DSP */
+	dsp_on();
+
+	/* Bringup UART0 and 2 out of reset */
+	REG(UART0_PWREMU_MGMT) = 0x00006001;
+	REG(UART2_PWREMU_MGMT) = 0x00006001;
+
+	/* Enable GIO3.3V cells used for EMAC */
+	REG(VDD3P3V_PWDN) = 0;
+
+	/* Enable UART0 and 2 MUX lines */
+	REG(PINMUX1) |= 1;
+	REG(PINMUX1) |= 4;
+
+	/* Enable EMAC and AEMIF pins */
+	REG(PINMUX0) = 0x80000c1f;
+
+	/* Enable I2C pin Mux */
+	REG(PINMUX1) |= (1 << 7);
+
+	/* Set the Bus Priority Register to appropriate value */
+	REG(VBPR) = 0x20;
+
+	timer_init();
+
+	return(0);
+}
+
+int misc_init_r(void)
+{
+	int		clk = 0;
+
+	clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
+
+	printf("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27)/2);
+	printf("DDR Clock : %dMHz\n", (clk / 2));
+
+	if (!eth_hw_init())
+		printf("ethernet init failed!\n");
+	else
+		printf("ETH PHY   : %s\n", phy.name);
+
+	return(0);
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return(0);
+}
diff --git a/board/prodrive/pmdra/u-boot.lds b/board/prodrive/pmdra/u-boot.lds
new file mode 100644
index 0000000000..710b2a2d6e
--- /dev/null
+++ b/board/prodrive/pmdra/u-boot.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+	. = ALIGN(4);
+	.text	:
+	{
+	  cpu/arm926ejs/start.o	(.text)
+	  *(.text)
+	}
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+	. = ALIGN(4);
+	.data : { *(.data) }
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile
index d5ac7d3fd9..7701b03bbe 100644
--- a/cpu/arm1136/Makefile
+++ b/cpu/arm1136/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= interrupts.o cpu.o
+COBJS	= cpu.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index fa78eaa7f0..90e955303b 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -33,9 +33,6 @@
 
 #include <common.h>
 #include <command.h>
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-#include <asm/arch/omap2420.h>
-#endif
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
@@ -47,10 +44,10 @@ static unsigned long read_p15_c1 (void)
 	unsigned long value;
 
 	__asm__ __volatile__(
-						"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-						: "=r" (value)
-						:
-						: "memory");
+		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
 	return value;
 }
 
diff --git a/cpu/arm1136/mx31/Makefile b/cpu/arm1136/mx31/Makefile
new file mode 100644
index 0000000000..1fc8eea451
--- /dev/null
+++ b/cpu/arm1136/mx31/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+COBJS	= interrupts.o serial.o generic.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#######################################################################
+##
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c
new file mode 100644
index 0000000000..297d616d5e
--- /dev/null
+++ b/cpu/arm1136/mx31/generic.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/mx31-regs.h>
+
+static u32 mx31_decode_pll(u32 reg, u32 infreq)
+{
+	u32 mfi = (reg >> 10) & 0xf;
+	u32 mfn = reg & 0x3f;
+	u32 mfd = (reg >> 16) & 0x3f;
+	u32 pd =  (reg >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+	mfd += 1;
+	pd += 1;
+
+	return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
+		(mfd * pd)) << 10;
+}
+
+u32 mx31_get_mpl_dpdgck_clk(void)
+{
+	u32 infreq;
+
+	if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
+		infreq = CONFIG_MX31_CLK32 * 1024;
+	else
+		infreq = CONFIG_MX31_HCLK_FREQ;
+
+	return mx31_decode_pll(__REG(CCM_MPCTL), infreq); }
+
+u32 mx31_get_mcu_main_clk(void)
+{
+	/* For now we assume mpl_dpdgck_clk == mcu_main_clk
+	 * which should be correct for most boards
+	 */
+	return mx31_get_mpl_dpdgck_clk();
+}
+
+u32 mx31_get_ipg_clk(void)
+{
+	u32 freq = mx31_get_mcu_main_clk();
+	u32 pdr0 = __REG(CCM_PDR0);
+
+	freq /= ((pdr0 >> 3) & 0x7) + 1;
+	freq /= ((pdr0 >> 6) & 0x3) + 1;
+
+	return freq;
+}
+
+void mx31_dump_clocks(void)
+{
+	u32 cpufreq = mx31_get_mcu_main_clk();
+	printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
+	printf("ipg clock     : %dHz\n", mx31_get_ipg_clk());
+}
+
+void mx31_gpio_mux(unsigned long mode)
+{
+	unsigned long reg, shift, tmp;
+
+	reg = IOMUXC_BASE + (mode & 0xfc);
+	shift = (~mode & 0x3) * 8;
+
+	tmp = __REG(reg);
+	tmp &= ~(0xff << shift);
+	tmp |= ((mode >> 8) & 0xff) << shift;
+	__REG(reg) = tmp;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	printf("CPU:   Freescale i.MX31 at %d MHz\n",
+		mx31_get_mcu_main_clk() / 1000000);
+	return 0;
+}
+#endif
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
new file mode 100644
index 0000000000..189f6017ab
--- /dev/null
+++ b/cpu/arm1136/mx31/interrupts.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/mx31-regs.h>
+
+#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
+
+/* General purpose timers registers */
+#define GPTCR   __REG(TIMER_BASE) /* Control register */
+#define GPTPR  __REG(TIMER_BASE + 0x4) /* Prescaler register */
+#define GPTSR   __REG(TIMER_BASE + 0x8) /* Status register */
+#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR       (1<<15) /* Software reset */
+#define GPTCR_FRR       (1<<9)  /* Freerun / restart */
+#define GPTCR_CLKSOURCE_32 (4<<6)  /* Clock source */
+#define GPTCR_TEN       (1)     /* Timer enable */
+
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ */
+int interrupt_init(void)
+{
+	int i;
+
+	/* setup GP Timer 1 */
+	GPTCR = GPTCR_SWR;
+	for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */
+	GPTPR = 0; /* 32Khz */
+	/* Freerun Mode, PERCLK1 input */
+	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+
+	return 0;
+}
+
+void reset_timer_masked(void)
+{
+	GPTCR = 0;
+	/* Freerun Mode, PERCLK1 input*/
+	GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+}
+
+ulong get_timer_masked(void)
+{
+	ulong val = GPTCNT;
+	return val;
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay(unsigned long usec)
+{
+	ulong tmo, tmp;
+
+	if (usec >= 1000) {
+	/* "big" number, spread normalization to seconds */
+		/* start to normalize for usec to ticks per sec */
+		tmo = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= CFG_HZ;
+		tmo /= 1000;	/* finish normalize. */
+	} else {
+		/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CFG_HZ;
+		tmo /= (1000*1000);
+	}
+
+	tmp = get_timer(0);		/* get current timestamp */
+	if ((tmo + tmp + 1) < tmp)
+		/* setting this forward will roll time stamp */
+		/* reset "advancing" timestamp to 0, set lastinc value */
+		reset_timer_masked();
+	else
+		/* else, set advancing stamp wake up time */
+		tmo	+= tmp;
+	while (get_timer_masked() < tmo)/* loop till event */
+		/*NOP*/;
+}
+
+void reset_cpu(ulong addr)
+{
+	__REG16(WDOG_BASE) = 4;
+}
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
new file mode 100644
index 0000000000..f7e1b3b1a9
--- /dev/null
+++ b/cpu/arm1136/mx31/serial.c
@@ -0,0 +1,230 @@
+/*
+ * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#if defined CONFIG_MX31_UART
+
+#include <asm/arch/mx31.h>
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+
+#ifdef CFG_MX31_UART1
+#define UART_PHYS 0x43f90000
+#elif defined(CFG_MX31_UART2)
+#define UART_PHYS 0x43f94000
+#elif defined(CFG_MX31_UART3)
+#define UART_PHYS 0x5000c000
+#elif defined(CFG_MX31_UART4)
+#define UART_PHYS 0x43fb0000
+#elif defined(CFG_MX31_UART5)
+#define UART_PHYS 0x43fb4000
+#else
+#error "define CFG_MX31_UARTx to use the mx31 UART driver"
+#endif
+
+/* Register definitions */
+#define URXD  0x0  /* Receiver Register */
+#define UTXD  0x40 /* Transmitter Register */
+#define UCR1  0x80 /* Control Register 1 */
+#define UCR2  0x84 /* Control Register 2 */
+#define UCR3  0x88 /* Control Register 3 */
+#define UCR4  0x8c /* Control Register 4 */
+#define UFCR  0x90 /* FIFO Control Register */
+#define USR1  0x94 /* Status Register 1 */
+#define USR2  0x98 /* Status Register 2 */
+#define UESC  0x9c /* Escape Character Register */
+#define UTIM  0xa0 /* Escape Timer Register */
+#define UBIR  0xa4 /* BRM Incremental Register */
+#define UBMR  0xa8 /* BRM Modulator Register */
+#define UBRC  0xac /* Baud Rate Count Register */
+#define UTS   0xb4 /* UART Test Register (mx31) */
+
+/* UART Control Register Bit Fields.*/
+#define  URXD_CHARRDY    (1<<15)
+#define  URXD_ERR        (1<<14)
+#define  URXD_OVRRUN     (1<<13)
+#define  URXD_FRMERR     (1<<12)
+#define  URXD_BRK        (1<<11)
+#define  URXD_PRERR      (1<<10)
+#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
+#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
+#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
+#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
+#define  UCR1_RRDYEN     (1<<9)  /* Recv ready interrupt enable */
+#define  UCR1_RDMAEN     (1<<8)  /* Recv ready DMA enable */
+#define  UCR1_IREN       (1<<7)  /* Infrared interface enable */
+#define  UCR1_TXMPTYEN   (1<<6)  /* Transimitter empty interrupt enable */
+#define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
+#define  UCR1_SNDBRK     (1<<4)  /* Send break */
+#define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
+#define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
+#define  UCR1_DOZE       (1<<1)  /* Doze */
+#define  UCR1_UARTEN     (1<<0)  /* UART enabled */
+#define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
+#define  UCR2_IRTS  	 (1<<14) /* Ignore RTS pin */
+#define  UCR2_CTSC  	 (1<<13) /* CTS pin control */
+#define  UCR2_CTS        (1<<12) /* Clear to send */
+#define  UCR2_ESCEN      (1<<11) /* Escape enable */
+#define  UCR2_PREN       (1<<8)  /* Parity enable */
+#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
+#define  UCR2_STPB       (1<<6)	 /* Stop */
+#define  UCR2_WS         (1<<5)	 /* Word size */
+#define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
+#define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
+#define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
+#define  UCR2_SRST 	 (1<<0)	 /* SW reset */
+#define  UCR3_DTREN 	 (1<<13) /* DTR interrupt enable */
+#define  UCR3_PARERREN   (1<<12) /* Parity enable */
+#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
+#define  UCR3_DSR        (1<<10) /* Data set ready */
+#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
+#define  UCR3_RI         (1<<8)  /* Ring indicator */
+#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
+#define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
+#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
+#define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
+#define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
+#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
+#define  UCR4_INVR  	 (1<<9)  /* Inverted infrared reception */
+#define  UCR4_ENIRI 	 (1<<8)  /* Serial infrared interrupt enable */
+#define  UCR4_WKEN  	 (1<<7)  /* Wake interrupt enable */
+#define  UCR4_REF16 	 (1<<6)  /* Ref freq 16 MHz */
+#define  UCR4_IRSC  	 (1<<5)  /* IR special case */
+#define  UCR4_TCEN  	 (1<<3)  /* Transmit complete interrupt enable */
+#define  UCR4_BKEN  	 (1<<2)  /* Break condition interrupt enable */
+#define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
+#define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
+#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
+#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
+#define  USR1_RTSS  	 (1<<14) /* RTS pin status */
+#define  USR1_TRDY  	 (1<<13) /* Transmitter ready interrupt/dma flag */
+#define  USR1_RTSD  	 (1<<12) /* RTS delta */
+#define  USR1_ESCF  	 (1<<11) /* Escape seq interrupt flag */
+#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
+#define  USR1_RRDY       (1<<9)	 /* Receiver ready interrupt/dma flag */
+#define  USR1_TIMEOUT    (1<<7)	 /* Receive timeout interrupt status */
+#define  USR1_RXDS  	 (1<<6)	 /* Receiver idle interrupt flag */
+#define  USR1_AIRINT	 (1<<5)	 /* Async IR wake interrupt flag */
+#define  USR1_AWAKE 	 (1<<4)	 /* Aysnc wake interrupt flag */
+#define  USR2_ADET  	 (1<<15) /* Auto baud rate detect complete */
+#define  USR2_TXFE  	 (1<<14) /* Transmit buffer FIFO empty */
+#define  USR2_DTRF  	 (1<<13) /* DTR edge interrupt flag */
+#define  USR2_IDLE  	 (1<<12) /* Idle condition */
+#define  USR2_IRINT 	 (1<<8)	 /* Serial infrared interrupt flag */
+#define  USR2_WAKE  	 (1<<7)	 /* Wake */
+#define  USR2_RTSF  	 (1<<4)	 /* RTS edge interrupt flag */
+#define  USR2_TXDC  	 (1<<3)	 /* Transmitter complete */
+#define  USR2_BRCD  	 (1<<2)	 /* Break condition */
+#define  USR2_ORE        (1<<1)	 /* Overrun error */
+#define  USR2_RDR        (1<<0)	 /* Recv data ready */
+#define  UTS_FRCPERR	 (1<<13) /* Force parity error */
+#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
+#define  UTS_TXEMPTY	 (1<<6)	 /* TxFIFO empty */
+#define  UTS_RXEMPTY	 (1<<5)	 /* RxFIFO empty */
+#define  UTS_TXFULL 	 (1<<4)	 /* TxFIFO full */
+#define  UTS_RXFULL 	 (1<<3)	 /* RxFIFO full */
+#define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void serial_setbrg(void)
+{
+	u32 clk = mx31_get_ipg_clk();
+
+	if (!gd->baudrate)
+		gd->baudrate = CONFIG_BAUDRATE;
+
+	__REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */
+	__REG(UART_PHYS + UBIR) = 0xf;
+	__REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate);
+
+}
+
+int serial_getc(void)
+{
+	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+	return __REG(UART_PHYS + URXD);
+}
+
+void serial_putc(const char c)
+{
+	__REG(UART_PHYS + UTXD) = c;
+
+	/* wait for transmitter to be ready */
+	while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer  */
+int serial_tstc(void)
+{
+	/* If receive fifo is empty, return false */
+	if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
+		return 0;
+	return 1;
+}
+
+void serial_puts(const char *s)
+{
+	while (*s) {
+		serial_putc(*s++);
+	}
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init(void)
+{
+	__REG(UART_PHYS + UCR1) = 0x0;
+	__REG(UART_PHYS + UCR2) = 0x0;
+
+	while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
+
+	__REG(UART_PHYS + UCR3) = 0x0704;
+	__REG(UART_PHYS + UCR4) = 0x8000;
+	__REG(UART_PHYS + UESC) = 0x002b;
+	__REG(UART_PHYS + UTIM) = 0x0;
+
+	__REG(UART_PHYS + UTS) = 0x0;
+
+	serial_setbrg();
+
+	__REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \
+					UCR2_TXEN | UCR2_SRST;
+
+	__REG(UART_PHYS + UCR1) = UCR1_UARTEN;
+
+	return 0;
+}
+
+
+#endif /* CONFIG_MX31 */
diff --git a/cpu/arm1136/omap24xx/Makefile b/cpu/arm1136/omap24xx/Makefile
new file mode 100644
index 0000000000..39b0a82811
--- /dev/null
+++ b/cpu/arm1136/omap24xx/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+COBJS	= interrupts.o
+SOBJS	= start.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c
index 491c902ace..8503b24a8e 100644..100755
--- a/cpu/arm1136/interrupts.c
+++ b/cpu/arm1136/omap24xx/interrupts.c
@@ -32,31 +32,28 @@
 
 #include <common.h>
 #include <asm/arch/bits.h>
-
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-# include <asm/arch/omap2420.h>
-#endif
+#include <asm/arch/omap2420.h>
 
 #define TIMER_LOAD_VAL 0
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
-/* Use the IntegratorCP function from board/integratorcp.c */
-#else
+#define READ_TIMER (*((volatile ulong*)(CFG_TIMERBASE+TCRR)))
 
 static ulong timestamp;
 static ulong lastinc;
 
-/* nothing really to do with interrupts, just starts up a counter. */
-int interrupt_init (void)
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ */
+int interrupt_init(void)
 {
 	int32_t val;
 
 	/* Start the counter ticking up */
-	*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;	/* reload value on overflow*/
-	val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;		/* mask to enable timer*/
+	/* reload value on overflow*/
+	*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;
+	/* mask to enable timer*/
+	val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;
 	*((int32_t *) (CFG_TIMERBASE + TCLR)) = val;	/* start timer */
 
 	reset_timer_masked(); /* init the timestamp and lastinc value */
@@ -66,82 +63,99 @@ int interrupt_init (void)
 /*
  * timer without interrupts
  */
-void reset_timer (void)
+void reset_timer(void)
 {
-	reset_timer_masked ();
+	reset_timer_masked();
 }
 
-ulong get_timer (ulong base)
+ulong get_timer(ulong base)
 {
-	return get_timer_masked () - base;
+	return get_timer_masked() - base;
 }
 
-void set_timer (ulong t)
+void set_timer(ulong t)
 {
 	timestamp = t;
 }
 
 /* delay x useconds AND perserve advance timstamp value */
-void udelay (unsigned long usec)
+void udelay(unsigned long usec)
 {
 	ulong tmo, tmp;
 
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
+	/* if "big" number, spread normalization to seconds */
+	if (usec >= 1000) {
+		/* start to normalize for usec to ticks per sec */
+		tmo = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= CFG_HZ;
+		/* finish normalize. */
+		tmo /= 1000;
+	} else {
+		/* else small number, don't kill it prior to HZ multiply */
 		tmo = usec * CFG_HZ;
 		tmo /= (1000*1000);
 	}
-
-	tmp = get_timer (0);		/* get current timestamp */
-	if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
-		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastinc value */
+	/* get current timestamp */
+	tmp = get_timer(0);
+	if ((tmo + tmp + 1) < tmp)
+		/* setting this forward will roll time stamp */
+		/* reset "advancing" timestamp to 0, set lastinc value */
+		reset_timer_masked();
 	else
-		tmo	+= tmp;				/* else, set advancing stamp wake up time */
-	while (get_timer_masked () < tmo)/* loop till event */
+		/* else, set advancing stamp wake up time */
+		tmo	+= tmp;
+	while (get_timer_masked() < tmo)/* loop till event */
 		/*NOP*/;
 }
 
-void reset_timer_masked (void)
+void reset_timer_masked(void)
 {
 	/* reset time */
-	lastinc = READ_TIMER;		/* capture current incrementer value time */
-	timestamp = 0;				/* start "advancing" time stamp from 0 */
+	/* capture current incrementer value time */
+	lastinc = READ_TIMER;
+	/* start "advancing" time stamp from 0 */
+	timestamp = 0;
 }
 
-ulong get_timer_masked (void)
+ulong get_timer_masked(void)
 {
-	ulong now = READ_TIMER;		/* current tick value */
+	ulong now = READ_TIMER;	/* current tick value */
 
-	if (now >= lastinc)			/* normal mode (non roll) */
-		timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
-	else						/* we have rollover of incrementer */
+	/* normal mode (non roll) */
+	if (now >= lastinc)
+		/* move stamp forward with absolute diff ticks */
+		timestamp += (now - lastinc);
+	else
+		/* we have rollover of incrementer */
 		timestamp += (0xFFFFFFFF - lastinc) + now;
 	lastinc = now;
 	return timestamp;
 }
 
 /* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
+void udelay_masked(unsigned long usec)
 {
 	ulong tmo;
 	ulong endtime;
 	signed long diff;
 
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
+	if (usec >= 1000) {
+		/* "big" number, spread normalization to seconds */
+		/* start to normalize for usec to ticks per sec */
+		tmo = usec / 1000;
+		/* find number of "ticks" to wait to achieve target */
+		tmo *= CFG_HZ;
+		tmo /= 1000;/* finish normalize. */
+	} else {
+		/* else small number, don't kill it prior to HZ multiply */
 		tmo = usec * CFG_HZ;
 		tmo /= (1000*1000);
 	}
-	endtime = get_timer_masked () + tmo;
+	endtime = get_timer_masked() + tmo;
 
 	do {
-		ulong now = get_timer_masked ();
+		ulong now = get_timer_masked();
 		diff = endtime - now;
 	} while (diff >= 0);
 }
@@ -158,10 +172,9 @@ unsigned long long get_ticks(void)
  * This function is derived from PowerPC code (timebase clock frequency).
  * On ARM it returns the number of timer ticks per second.
  */
-ulong get_tbclk (void)
+ulong get_tbclk(void)
 {
 	ulong tbclk;
 	tbclk = CFG_HZ;
 	return tbclk;
 }
-#endif /* !Integrator/CP */
diff --git a/cpu/arm1136/omap24xx/start.S b/cpu/arm1136/omap24xx/start.S
new file mode 100644
index 0000000000..5634312970
--- /dev/null
+++ b/cpu/arm1136/omap24xx/start.S
@@ -0,0 +1,42 @@
+/*
+ *  armboot - Startup Code for OMP2420/ARM1136 CPU-core
+ *
+ *  Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
+ *
+ *  Copyright (c) 2001	Marius Gr??ger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Z??pke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/omap2420.h>
+
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, rstctl	/* get addr for global reset reg */
+	mov	r3, #0x2	/* full reset pll+mpu */
+	str	r3, [r1]	/* force reset */
+	mov	r0, r0
+_loop_forever:
+	b	_loop_forever
+rstctl:
+	.word	PM_RSTCTRL_WKUP
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 8b765f1e80..56009d0fb3 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -30,9 +30,6 @@
 
 #include <config.h>
 #include <version.h>
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-#include <asm/arch/omap2420.h>
-#endif
 .globl _start
 _start: b	reset
 #ifdef CONFIG_ONENAND_IPL
@@ -438,22 +435,4 @@ fiq:
 arm1136_cache_flush:
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I cache
 		mov	pc, lr			@ back to caller
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
-/* Use the IntegratorCP function from board/integratorcp/platform.S */
-#else
-
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, rstctl	/* get addr for global reset reg */
-	mov	r3, #0x2	/* full reset pll+mpu */
-	str	r3, [r1]	/* force reset */
-	mov	r0, r0
-_loop_forever:
-	b	_loop_forever
-rstctl:
-	.word	PM_RSTCTRL_WKUP
-
-#endif
 #endif	/* CONFIG_ONENAND_IPL */
diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S
index a87c112eca..79bc692c14 100644
--- a/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -3,6 +3,11 @@
  *
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
+ * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
+ * Changed:
+ * Made board specific defines such as DDR timing and PLL
+ * dividers. These should be set in the board config file
+ *
  * Partially based on TI sources, original copyrights follow:
  */
 
@@ -156,17 +161,17 @@ WaitPPL2Loop:
 
 	/* Program the PLL Multiplier */
 	ldr	r6, PLL2_PLLM
-	mov	r2, $0x17	/* 162 MHz */
+	mov	r2, $CFG_DAVINCI_PLL2_PLLM
 	str	r2, [r6]
 
 	/* Program the PLL2 Divisor Value */
 	ldr	r6, PLL2_DIV2
-	mov	r3, $0x01
+	mov	r3, $CFG_DAVINCI_PLL2_DIV2
 	str	r3, [r6]
 
 	/* Program the PLL2 Divisor Value */
 	ldr	r6, PLL2_DIV1
-	mov	r4, $0x0b	/* 54 MHz */
+	mov	r4, $CFG_DAVINCI_PLL2_DIV1
 	str	r4, [r6]
 
 	/* PLL2 DIV2 MMR */
@@ -273,7 +278,7 @@ checkDDRStatClkStop:
 	bne	checkDDRStatClkStop
 
 	/*------------------------------------------------------*
-	 * Program DDR2 MMRs for 162MHz Setting			*
+	 * Program DDR2 MMRs					*
 	 *------------------------------------------------------*/
 
 	/* Program PHY Control Register */
@@ -288,12 +293,12 @@ checkDDRStatClkStop:
 
 	/* Program SDRAM TIM-0 Config Register */
 	ldr	r6, SDTIM0
-	ldr	r7, SDTIM0_VAL_162MHz
+	ldr	r7, SDTIM0_VAL
 	str	r7, [r6]
 
 	/* Program SDRAM TIM-1 Config Register */
 	ldr	r6, SDTIM1
-	ldr	r7, SDTIM1_VAL_162MHz
+	ldr	r7, SDTIM1_VAL
 	str	r7, [r6]
 
 	/* Program the SDRAM Bank Config Control Register */
@@ -435,7 +440,7 @@ WaitLoop:
 
 	/* Program the PLL Multiplier */
 	ldr	r6, PLL1_PLLM
-	mov	r3, $0x15	/* For 594MHz */
+	mov	r3, $CFG_DAVINCI_PLL1_PLLM
 	str	r3, [r6]
 
 	/* Wait for PLL to Reset Properly */
@@ -467,7 +472,7 @@ PLL1Lock:
 	nop
 
 	/*------------------------------------------------------*
-	 * AEMIF configuration for NOR Flash (double check)     *
+	 * AEMIF configuration for NAND/NOR Flash		*
 	 *------------------------------------------------------*/
 	ldr	r0, _PINMUX0
 	ldr	r1, _DEV_SETTING
@@ -479,6 +484,12 @@ PLL1Lock:
 	orr	r2, r2, r1
 	str	r2, [r0]
 
+	ldr	r0, ACFG2
+	ldr	r1, ACFG2_VAL
+	ldr	r2, [r0]
+	and	r1, r2, r1
+	str	r1, [r0]
+
 	ldr	r0, ACFG3
 	ldr	r1, ACFG3_VAL
 	ldr	r2, [r0]
@@ -497,6 +508,12 @@ PLL1Lock:
 	and	r1, r2, r1
 	str	r1, [r0]
 
+	ldr	r0, NANDFCR
+	ldr	r1, NANDFCR_VAL
+	ldr	r2, [r0]
+	and	r1, r2, r1
+	str	r1, [r0]
+
 	/*--------------------------------------*
 	 * VTP manual Calibration               *
 	 *--------------------------------------*/
@@ -560,24 +577,36 @@ _PINMUX1:
 	.word	0x01c40004		/* Device Configuration Registers */
 
 _DEV_SETTING:
-	.word	0x00000c1f
+	.word	CFG_DAVINCI_PINMUX_0
 
 WAITCFG:
 	.word	0x01e00004
 WAITCFG_VAL:
-	.word	0
+	.word	CFG_DAVINCI_WAITCFG
+ACFG2:
+	.word	0x01e00010
+ACFG2_VAL:
+	.word	CFG_DAVINCI_ACFG2
 ACFG3:
 	.word	0x01e00014
 ACFG3_VAL:
-	.word	0x3ffffffd
+	.word	CFG_DAVINCI_ACFG3
 ACFG4:
 	.word	0x01e00018
 ACFG4_VAL:
-	.word	0x3ffffffd
+	.word	CFG_DAVINCI_ACFG4
 ACFG5:
 	.word	0x01e0001c
 ACFG5_VAL:
-	.word	0x3ffffffd
+	.word	CFG_DAVINCI_ACFG5
+NANDFCR:
+	.word	0x01e00060
+NANDFCR_VAL:
+#ifdef CFG_DAVINCI_NANDCE
+	.word	(1 << (CFG_DAVINCI_NANDCE - 2))
+#else
+	.word	0x00000000
+#endif
 
 MDCTL_DDR2:
 	.word	0x01c41a34
@@ -599,33 +628,27 @@ PSC_FLAG_CLEAR:
 PSC_GEM_FLAG_CLEAR:
 	.word	0xfffffeff
 
-/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
+/* DDR2 MMR & CONFIGURATION VALUES */
 DDRCTL:
 	.word	0x200000e4
 DDRCTL_VAL:
-	.word	0x50006405
+	.word	CFG_DAVINCI_DDRCTL
 SDREF:
 	.word	0x2000000c
 SDREF_VAL:
-	.word	0x000005c3
+	.word	CFG_DAVINCI_SDREF
 SDCFG:
 	.word	0x20000008
 SDCFG_VAL:
-#ifdef	DDR_4BANKS
-	.word	0x00178622
-#elif defined DDR_8BANKS
-	.word	0x00178632
-#else
-#error "Unknown DDR configuration!!!"
-#endif
+	.word	CFG_DAVINCI_SDCFG
 SDTIM0:
 	.word	0x20000010
-SDTIM0_VAL_162MHz:
-	.word	0x28923211
+SDTIM0_VAL:
+	.word	CFG_DAVINCI_SDTIM0
 SDTIM1:
 	.word	0x20000014
-SDTIM1_VAL_162MHz:
-	.word	0x0016c722
+SDTIM1_VAL:
+	.word	CFG_DAVINCI_SDTIM1
 VTPIOCR:
 	.word	0x200000f0	/* VTP IO Control register */
 DDRVTPR:
@@ -699,7 +722,7 @@ PLL2_DIV_MASK:
 MMARG_BRF0:
 	.word	0x01c42010	/* BRF margin mode 0 (R/W)*/
 MMARG_BRF0_VAL:
-	.word	0x00444400
+	.word	CFG_DAVINCI_MMARG_BRF0
 
 DDR2_START_ADDR:
 	.word	0x80000000
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 127be9fcd4..3257f83a2f 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -117,7 +117,7 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
 	dummy = emif_addr->NANDF3ECC;
 	dummy = emif_addr->NANDF4ECC;
 
-	emif_addr->NANDFCR |= (1 << 8);
+	emif_addr->NANDFCR |= (1 << (CFG_DAVINCI_NANDCE + 6));
 }
 
 static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
@@ -147,7 +147,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 
 	n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
 
-	region = 1;
+	region = (CFG_DAVINCI_NANDCE - 1);
 	while (n--) {
 		tmp = nand_davinci_readecc(mtd, region);
 		*ecc_code++ = tmp;
@@ -311,40 +311,9 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, i
 
 static void nand_flash_init(void)
 {
-	u_int32_t	acfg1 = 0x3ffffffc;
-	u_int32_t	acfg2 = 0x3ffffffc;
-	u_int32_t	acfg3 = 0x3ffffffc;
-	u_int32_t	acfg4 = 0x3ffffffc;
-	emifregs	emif_regs;
-
-	/*------------------------------------------------------------------*
-	 *  NAND FLASH CHIP TIMEOUT @ 459 MHz                               *
-	 *                                                                  *
-	 *  AEMIF.CLK freq   = PLL1/6 = 459/6 = 76.5 MHz                    *
-	 *  AEMIF.CLK period = 1/76.5 MHz = 13.1 ns                         *
-	 *                                                                  *
-	 *------------------------------------------------------------------*/
-	 acfg1 = 0
-	 	| (0 << 31 )	/* selectStrobe */
-	 	| (0 << 30 )	/* extWait */
-	 	| (1 << 26 )	/* writeSetup	10 ns */
-	 	| (3 << 20 )	/* writeStrobe	40 ns */
-	 	| (1 << 17 )	/* writeHold	10 ns */
-	 	| (1 << 13 )	/* readSetup	10 ns */
-	 	| (5 << 7 )	/* readStrobe	60 ns */
-	 	| (1 << 4 )	/* readHold	10 ns */
-	 	| (3 << 2 )	/* turnAround	?? ns */
-	 	| (0 << 0 )	/* asyncSize	8-bit bus */
-	 	;
-
-	emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
-
-	emif_regs->AWCCR |= 0x10000000;
-	emif_regs->AB1CR = acfg1;	/* 0x08244128 */;
-	emif_regs->AB2CR = acfg2;
-	emif_regs->AB3CR = acfg3;
-	emif_regs->AB4CR = acfg4;
-	emif_regs->NANDFCR = 0x00000101;
+	/* All EMIF initialization is done in lowlevel_init.S
+	 * and config values are in the board config files
+	 */
 }
 
 int board_nand_init(struct nand_chip *nand)
diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c
index 8bb8b45713..4797797b6d 100644
--- a/cpu/arm926ejs/davinci/timer.c
+++ b/cpu/arm926ejs/davinci/timer.c
@@ -42,9 +42,9 @@
 
 typedef volatile struct {
 	u_int32_t	pid12;
-	u_int32_t	emumgt_clksped;
-	u_int32_t	gpint_en;
-	u_int32_t	gpdir_dat;
+	u_int32_t	emumgt;
+	u_int32_t	na1;
+	u_int32_t	na2;
 	u_int32_t	tim12;
 	u_int32_t	tim34;
 	u_int32_t	prd12;
@@ -52,21 +52,12 @@ typedef volatile struct {
 	u_int32_t	tcr;
 	u_int32_t	tgcr;
 	u_int32_t	wdtcr;
-	u_int32_t	tlgc;
-	u_int32_t	tlmr;
 } davinci_timer;
 
 davinci_timer		*timer = (davinci_timer *)CFG_TIMERBASE;
 
 #define TIMER_LOAD_VAL	(CFG_HZ_CLOCK / CFG_HZ)
-#define READ_TIMER	timer->tim34
-
-/*
- * Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap
- * around of timestamp already after min ~159s, divide it, e.g. by 16.
- * timestamp will then wrap around all min ~42min
- */
-#define DIV(x)		((x) >> 4)
+#define TIM_CLK_DIV	16
 
 static ulong timestamp;
 static ulong lastinc;
@@ -76,63 +67,50 @@ int timer_init(void)
 	/* We are using timer34 in unchained 32-bit mode, full speed */
 	timer->tcr = 0x0;
 	timer->tgcr = 0x0;
-	timer->tgcr = 0x06;
+	timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8);
 	timer->tim34 = 0x0;
 	timer->prd34 = TIMER_LOAD_VAL;
 	lastinc = 0;
-	timer->tcr = 0x80 << 16;
 	timestamp = 0;
+	timer->tcr = 2 << 22;
 
 	return(0);
 }
 
 void reset_timer(void)
 {
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return(get_timer_masked() - base);
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
-void udelay(unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-void reset_timer_masked(void)
-{
-	lastinc = DIV(READ_TIMER);
+	timer->tcr = 0x0;
+	timer->tim34 = 0;
+	lastinc = 0;
 	timestamp = 0;
+	timer->tcr = 2 << 22;
 }
 
-ulong get_timer_raw(void)
+static ulong get_timer_raw(void)
 {
-	ulong now = DIV(READ_TIMER);
+	ulong now = timer->tim34;
 
 	if (now >= lastinc) {
 		/* normal mode */
 		timestamp += now - lastinc;
 	} else {
 		/* overflow ... */
-		timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc;
+		timestamp += now + TIMER_LOAD_VAL - lastinc;
 	}
 	lastinc = now;
 	return timestamp;
 }
 
-ulong get_timer_masked(void)
+ulong get_timer(ulong base)
+{
+	return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); }
+
+void set_timer(ulong t)
 {
-	return(get_timer_raw() / DIV(TIMER_LOAD_VAL));
+	timestamp = t;
 }
 
-void udelay_masked(unsigned long usec)
+void udelay(unsigned long usec)
 {
 	ulong tmo;
 	ulong endtime;
@@ -140,7 +118,7 @@ void udelay_masked(unsigned long usec)
 
 	tmo = CFG_HZ_CLOCK / 1000;
 	tmo *= usec;
-	tmo /= 1000;
+	tmo /= (1000 * TIM_CLK_DIV);
 
 	endtime = get_timer_raw() + tmo;
 
@@ -165,8 +143,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk(void)
 {
-	ulong tbclk;
-
-	tbclk = CFG_HZ;
-	return(tbclk);
+	return CFG_HZ;
 }
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 29d6c03dbb..071ef00b15 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o
 COBJS-y += omap1510_i2c.o
 COBJS-y += omap24xx_i2c.o
 COBJS-y += tsi108_i2c.o
+COBJS-y += mxc_i2c.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
new file mode 100644
index 0000000000..3c2a9cf180
--- /dev/null
+++ b/drivers/i2c/mxc_i2c.c
@@ -0,0 +1,207 @@
+/*
+ * i2c driver for Freescale mx31
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC)
+
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+#define IADR	0x00
+#define IFDR	0x04
+#define I2CR	0x08
+#define I2SR	0x0c
+#define I2DR	0x10
+
+#define I2CR_IEN	(1 << 7)
+#define I2CR_IIEN	(1 << 6)
+#define I2CR_MSTA	(1 << 5)
+#define I2CR_MTX	(1 << 4)
+#define I2CR_TX_NO_AK	(1 << 3)
+#define I2CR_RSTA	(1 << 2)
+
+#define I2SR_ICF	(1 << 7)
+#define I2SR_IBB	(1 << 5)
+#define I2SR_IIF	(1 << 1)
+#define I2SR_RX_NO_AK	(1 << 0)
+
+#ifdef CFG_I2C_MX31_PORT1
+#define I2C_BASE	0x43f80000
+#elif defined(CFG_I2C_MX31_PORT2)
+#define I2C_BASE	0x43f98000
+#elif defined(CFG_I2C_MX31_PORT3)
+#define I2C_BASE	0x43f84000
+#else
+#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#endif
+
+#ifdef DEBUG
+#define DPRINTF(args...)  printf(args)
+#else
+#define DPRINTF(args...)
+#endif
+
+static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
+			160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
+			1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
+
+void i2c_init(int speed, int unused)
+{
+	int freq = mx31_get_ipg_clk();
+	int i;
+
+	for (i = 0; i < 0x1f; i++)
+		if (freq / div[i] <= speed)
+			break;
+
+	DPRINTF("%s: speed: %d\n", __FUNCTION__, speed);
+
+	__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
+	__REG16(I2C_BASE + IFDR) = i;
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+	__REG16(I2C_BASE + I2SR) = 0;
+}
+
+static int wait_busy(void)
+{
+	int timeout = 10000;
+
+	while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
+		udelay(1);
+	__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+
+	return timeout;
+}
+
+static int tx_byte(u8 byte)
+{
+	__REG16(I2C_BASE + I2DR) = byte;
+
+	if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
+		return -1;
+	return 0;
+}
+
+static int rx_byte(void)
+{
+	if (!wait_busy())
+		return -1;
+
+	return __REG16(I2C_BASE + I2DR);
+}
+
+int i2c_probe(uchar chip)
+{
+	int ret;
+
+	__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX;
+	ret = tx_byte(chip << 1);
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX;
+
+	return ret;
+}
+
+static int i2c_addr(uchar chip, uint addr, int alen)
+{
+	__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX;
+
+	if (tx_byte(chip << 1))
+		return -1;
+
+	while (alen--)
+		if (tx_byte((addr >> (alen * 8)) & 0xff))
+			return -1;
+	return 0;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int timeout = 10000;
+	int ret;
+
+	DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \
+				__FUNCTION__, chip, addr, alen, len);
+
+	if (i2c_addr(chip, addr, alen)) {
+		printf("i2c_addr failed\n");
+		return -1;
+	}
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA |	\
+					I2CR_MTX | I2CR_RSTA;
+
+	if (tx_byte(chip << 1 | 1))
+		return -1;
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | ((len == 1)	\
+							? I2CR_TX_NO_AK : 0);
+
+	ret = __REG16(I2C_BASE + I2DR);
+
+	while (len--) {
+		if ((ret = rx_byte()) < 0)
+			return -1;
+		*buf++ = ret;
+		if (len <= 1)
+			__REG16(I2C_BASE + I2CR) = I2CR_IEN |	\
+					I2CR_MSTA | I2CR_TX_NO_AK;
+	}
+
+	wait_busy();
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+	while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+		udelay(1);
+
+	return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int timeout = 10000;
+	DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",	\
+					__FUNCTION__, chip, addr, alen, len);
+
+	if (i2c_addr(chip, addr, alen))
+		return -1;
+
+	while (len--)
+		if (tx_byte(*buf++))
+			return -1;
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+	while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+		udelay(1);
+
+	return 0;
+}
+
+#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 320dc3ebac..948239885c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -54,6 +54,7 @@ COBJS-y += rtl8139.o
 COBJS-y += rtl8169.o
 COBJS-y += s3c4510b_eth.o
 COBJS-y += smc91111.o
+COBJS-y += smc911x.o
 COBJS-y += tigon3.o
 COBJS-y += tsec.o
 COBJS-y += tsi108_eth.o
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
new file mode 100644
index 0000000000..2fd5777790
--- /dev/null
+++ b/drivers/net/smc911x.c
@@ -0,0 +1,680 @@
+/*
+ * SMSC LAN9[12]1[567] Network driver
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_SMC911X
+
+#include <command.h>
+#include <net.h>
+#include <miiphy.h>
+
+#define mdelay(n)       udelay((n)*1000)
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+
+/* Below are the register offsets and bit definitions
+ * of the Lan911x memory space
+ */
+#define RX_DATA_FIFO		 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
+
+#define TX_DATA_FIFO		 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define	TX_CMD_A_INT_ON_COMP			(0x80000000)
+#define	TX_CMD_A_INT_BUF_END_ALGN		(0x03000000)
+#define	TX_CMD_A_INT_4_BYTE_ALGN		(0x00000000)
+#define	TX_CMD_A_INT_16_BYTE_ALGN		(0x01000000)
+#define	TX_CMD_A_INT_32_BYTE_ALGN		(0x02000000)
+#define	TX_CMD_A_INT_DATA_OFFSET		(0x001F0000)
+#define	TX_CMD_A_INT_FIRST_SEG			(0x00002000)
+#define	TX_CMD_A_INT_LAST_SEG			(0x00001000)
+#define	TX_CMD_A_BUF_SIZE			(0x000007FF)
+#define	TX_CMD_B_PKT_TAG			(0xFFFF0000)
+#define	TX_CMD_B_ADD_CRC_DISABLE		(0x00002000)
+#define	TX_CMD_B_DISABLE_PADDING		(0x00001000)
+#define	TX_CMD_B_PKT_BYTE_LENGTH		(0x000007FF)
+
+#define RX_STATUS_FIFO		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define	RX_STS_PKT_LEN				(0x3FFF0000)
+#define	RX_STS_ES				(0x00008000)
+#define	RX_STS_BCST				(0x00002000)
+#define	RX_STS_LEN_ERR				(0x00001000)
+#define	RX_STS_RUNT_ERR				(0x00000800)
+#define	RX_STS_MCAST				(0x00000400)
+#define	RX_STS_TOO_LONG				(0x00000080)
+#define	RX_STS_COLL				(0x00000040)
+#define	RX_STS_ETH_TYPE				(0x00000020)
+#define	RX_STS_WDOG_TMT				(0x00000010)
+#define	RX_STS_MII_ERR				(0x00000008)
+#define	RX_STS_DRIBBLING			(0x00000004)
+#define	RX_STS_CRC_ERR				(0x00000002)
+#define RX_STATUS_FIFO_PEEK 	__REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
+#define TX_STATUS_FIFO		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define	TX_STS_TAG				(0xFFFF0000)
+#define	TX_STS_ES				(0x00008000)
+#define	TX_STS_LOC				(0x00000800)
+#define	TX_STS_NO_CARR				(0x00000400)
+#define	TX_STS_LATE_COLL			(0x00000200)
+#define	TX_STS_MANY_COLL			(0x00000100)
+#define	TX_STS_COLL_CNT				(0x00000078)
+#define	TX_STS_MANY_DEFER			(0x00000004)
+#define	TX_STS_UNDERRUN				(0x00000002)
+#define	TX_STS_DEFERRED				(0x00000001)
+#define TX_STATUS_FIFO_PEEK	__REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
+#define ID_REV			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define	ID_REV_CHIP_ID				(0xFFFF0000)  /* RO */
+#define	ID_REV_REV_ID				(0x0000FFFF)  /* RO */
+
+#define INT_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define	INT_CFG_INT_DEAS			(0xFF000000)  /* R/W */
+#define	INT_CFG_INT_DEAS_CLR			(0x00004000)
+#define	INT_CFG_INT_DEAS_STS			(0x00002000)
+#define	INT_CFG_IRQ_INT				(0x00001000)  /* RO */
+#define	INT_CFG_IRQ_EN				(0x00000100)  /* R/W */
+#define	INT_CFG_IRQ_POL				(0x00000010)  /* R/W */
+						/* Not Affected by SW Reset */
+#define	INT_CFG_IRQ_TYPE			(0x00000001)  /* R/W */
+						/* Not Affected by SW Reset */
+
+#define INT_STS			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define	INT_STS_SW_INT				(0x80000000)  /* R/WC */
+#define	INT_STS_TXSTOP_INT			(0x02000000)  /* R/WC */
+#define	INT_STS_RXSTOP_INT			(0x01000000)  /* R/WC */
+#define	INT_STS_RXDFH_INT			(0x00800000)  /* R/WC */
+#define	INT_STS_RXDF_INT			(0x00400000)  /* R/WC */
+#define	INT_STS_TX_IOC				(0x00200000)  /* R/WC */
+#define	INT_STS_RXD_INT				(0x00100000)  /* R/WC */
+#define	INT_STS_GPT_INT				(0x00080000)  /* R/WC */
+#define	INT_STS_PHY_INT				(0x00040000)  /* RO */
+#define	INT_STS_PME_INT				(0x00020000)  /* R/WC */
+#define	INT_STS_TXSO				(0x00010000)  /* R/WC */
+#define	INT_STS_RWT				(0x00008000)  /* R/WC */
+#define	INT_STS_RXE				(0x00004000)  /* R/WC */
+#define	INT_STS_TXE				(0x00002000)  /* R/WC */
+/*#define	INT_STS_ERX		(0x00001000)*/  /* R/WC */
+#define	INT_STS_TDFU				(0x00000800)  /* R/WC */
+#define	INT_STS_TDFO				(0x00000400)  /* R/WC */
+#define	INT_STS_TDFA				(0x00000200)  /* R/WC */
+#define	INT_STS_TSFF				(0x00000100)  /* R/WC */
+#define	INT_STS_TSFL				(0x00000080)  /* R/WC */
+/*#define	INT_STS_RXDF		(0x00000040)*/  /* R/WC */
+#define	INT_STS_RDFO				(0x00000040)  /* R/WC */
+#define	INT_STS_RDFL				(0x00000020)  /* R/WC */
+#define	INT_STS_RSFF				(0x00000010)  /* R/WC */
+#define	INT_STS_RSFL				(0x00000008)  /* R/WC */
+#define	INT_STS_GPIO2_INT			(0x00000004)  /* R/WC */
+#define	INT_STS_GPIO1_INT			(0x00000002)  /* R/WC */
+#define	INT_STS_GPIO0_INT			(0x00000001)  /* R/WC */
+#define INT_EN			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define	INT_EN_SW_INT_EN			(0x80000000)  /* R/W */
+#define	INT_EN_TXSTOP_INT_EN			(0x02000000)  /* R/W */
+#define	INT_EN_RXSTOP_INT_EN			(0x01000000)  /* R/W */
+#define	INT_EN_RXDFH_INT_EN			(0x00800000)  /* R/W */
+/*#define	INT_EN_RXDF_INT_EN		(0x00400000)*/  /* R/W */
+#define	INT_EN_TIOC_INT_EN			(0x00200000)  /* R/W */
+#define	INT_EN_RXD_INT_EN			(0x00100000)  /* R/W */
+#define	INT_EN_GPT_INT_EN			(0x00080000)  /* R/W */
+#define	INT_EN_PHY_INT_EN			(0x00040000)  /* R/W */
+#define	INT_EN_PME_INT_EN			(0x00020000)  /* R/W */
+#define	INT_EN_TXSO_EN				(0x00010000)  /* R/W */
+#define	INT_EN_RWT_EN				(0x00008000)  /* R/W */
+#define	INT_EN_RXE_EN				(0x00004000)  /* R/W */
+#define	INT_EN_TXE_EN				(0x00002000)  /* R/W */
+/*#define	INT_EN_ERX_EN			(0x00001000)*/  /* R/W */
+#define	INT_EN_TDFU_EN				(0x00000800)  /* R/W */
+#define	INT_EN_TDFO_EN				(0x00000400)  /* R/W */
+#define	INT_EN_TDFA_EN				(0x00000200)  /* R/W */
+#define	INT_EN_TSFF_EN				(0x00000100)  /* R/W */
+#define	INT_EN_TSFL_EN				(0x00000080)  /* R/W */
+/*#define	INT_EN_RXDF_EN			(0x00000040)*/  /* R/W */
+#define	INT_EN_RDFO_EN				(0x00000040)  /* R/W */
+#define	INT_EN_RDFL_EN				(0x00000020)  /* R/W */
+#define	INT_EN_RSFF_EN				(0x00000010)  /* R/W */
+#define	INT_EN_RSFL_EN				(0x00000008)  /* R/W */
+#define	INT_EN_GPIO2_INT			(0x00000004)  /* R/W */
+#define	INT_EN_GPIO1_INT			(0x00000002)  /* R/W */
+#define	INT_EN_GPIO0_INT			(0x00000001)  /* R/W */
+
+#define BYTE_TEST		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
+#define FIFO_INT		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define	FIFO_INT_TX_AVAIL_LEVEL			(0xFF000000)  /* R/W */
+#define	FIFO_INT_TX_STS_LEVEL			(0x00FF0000)  /* R/W */
+#define	FIFO_INT_RX_AVAIL_LEVEL			(0x0000FF00)  /* R/W */
+#define	FIFO_INT_RX_STS_LEVEL			(0x000000FF)  /* R/W */
+
+#define RX_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define	RX_CFG_RX_END_ALGN			(0xC0000000)  /* R/W */
+#define		RX_CFG_RX_END_ALGN4		(0x00000000)  /* R/W */
+#define		RX_CFG_RX_END_ALGN16		(0x40000000)  /* R/W */
+#define		RX_CFG_RX_END_ALGN32		(0x80000000)  /* R/W */
+#define	RX_CFG_RX_DMA_CNT			(0x0FFF0000)  /* R/W */
+#define	RX_CFG_RX_DUMP				(0x00008000)  /* R/W */
+#define	RX_CFG_RXDOFF				(0x00001F00)  /* R/W */
+/*#define	RX_CFG_RXBAD			(0x00000001)*/  /* R/W */
+
+#define TX_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
+/*#define	TX_CFG_TX_DMA_LVL		(0xE0000000)*/	 /* R/W */
+/*#define	TX_CFG_TX_DMA_CNT		(0x0FFF0000)*/	 /* R/W */
+							/* Self Clearing */
+#define	TX_CFG_TXS_DUMP				(0x00008000)
+							/* Self Clearing */
+#define	TX_CFG_TXD_DUMP				(0x00004000)
+							/* Self Clearing */
+#define	TX_CFG_TXSAO				(0x00000004)  /* R/W */
+#define	TX_CFG_TX_ON				(0x00000002)  /* R/W */
+#define	TX_CFG_STOP_TX				(0x00000001)
+							/* Self Clearing */
+
+#define HW_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define	HW_CFG_TTM				(0x00200000)  /* R/W */
+#define	HW_CFG_SF				(0x00100000)  /* R/W */
+#define	HW_CFG_TX_FIF_SZ			(0x000F0000)  /* R/W */
+#define	HW_CFG_TR				(0x00003000)  /* R/W */
+#define	HW_CFG_PHY_CLK_SEL			(0x00000060)  /* R/W */
+#define	HW_CFG_PHY_CLK_SEL_INT_PHY 		(0x00000000) /* R/W */
+#define	HW_CFG_PHY_CLK_SEL_EXT_PHY 		(0x00000020) /* R/W */
+#define	HW_CFG_PHY_CLK_SEL_CLK_DIS 		(0x00000040) /* R/W */
+#define	HW_CFG_SMI_SEL				(0x00000010)  /* R/W */
+#define	HW_CFG_EXT_PHY_DET			(0x00000008)  /* RO */
+#define	HW_CFG_EXT_PHY_EN			(0x00000004)  /* R/W */
+#define	HW_CFG_32_16_BIT_MODE			(0x00000004)  /* RO */
+#define	HW_CFG_SRST_TO				(0x00000002)  /* RO */
+#define	HW_CFG_SRST				(0x00000001)
+							/* Self Clearing */
+
+#define RX_DP_CTRL		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define	RX_DP_CTRL_RX_FFWD			(0x80000000)  /* R/W */
+#define	RX_DP_CTRL_FFWD_BUSY			(0x80000000)  /* RO */
+
+#define RX_FIFO_INF		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define	 RX_FIFO_INF_RXSUSED			(0x00FF0000)  /* RO */
+#define	 RX_FIFO_INF_RXDUSED			(0x0000FFFF)  /* RO */
+
+#define TX_FIFO_INF		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define	TX_FIFO_INF_TSUSED			(0x00FF0000)  /* RO */
+#define	TX_FIFO_INF_TDFREE			(0x0000FFFF)  /* RO */
+
+#define PMT_CTRL		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define	PMT_CTRL_PM_MODE			(0x00003000)
+							/* Self Clearing */
+#define	PMT_CTRL_PHY_RST			(0x00000400)
+							/* Self Clearing */
+#define	PMT_CTRL_WOL_EN				(0x00000200)  /* R/W */
+#define	PMT_CTRL_ED_EN				(0x00000100)  /* R/W */
+#define	PMT_CTRL_PME_TYPE			(0x00000040)  /* R/W */
+						/* Not Affected by SW Reset */
+#define	PMT_CTRL_WUPS				(0x00000030)  /* R/WC */
+#define	PMT_CTRL_WUPS_NOWAKE			(0x00000000)  /* R/WC */
+#define	PMT_CTRL_WUPS_ED			(0x00000010)  /* R/WC */
+#define	PMT_CTRL_WUPS_WOL			(0x00000020)  /* R/WC */
+#define	PMT_CTRL_WUPS_MULTI			(0x00000030)  /* R/WC */
+#define	PMT_CTRL_PME_IND			(0x00000008)  /* R/W */
+#define	PMT_CTRL_PME_POL			(0x00000004)  /* R/W */
+#define	PMT_CTRL_PME_EN				(0x00000002)  /* R/W */
+						/* Not Affected by SW Reset */
+#define	PMT_CTRL_READY				(0x00000001)  /* RO */
+
+#define GPIO_CFG		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define	GPIO_CFG_LED3_EN			(0x40000000)  /* R/W */
+#define	GPIO_CFG_LED2_EN			(0x20000000)  /* R/W */
+#define	GPIO_CFG_LED1_EN			(0x10000000)  /* R/W */
+#define	GPIO_CFG_GPIO2_INT_POL			(0x04000000)  /* R/W */
+#define	GPIO_CFG_GPIO1_INT_POL			(0x02000000)  /* R/W */
+#define	GPIO_CFG_GPIO0_INT_POL			(0x01000000)  /* R/W */
+#define	GPIO_CFG_EEPR_EN			(0x00700000)  /* R/W */
+#define	GPIO_CFG_GPIOBUF2			(0x00040000)  /* R/W */
+#define	GPIO_CFG_GPIOBUF1			(0x00020000)  /* R/W */
+#define	GPIO_CFG_GPIOBUF0			(0x00010000)  /* R/W */
+#define	GPIO_CFG_GPIODIR2			(0x00000400)  /* R/W */
+#define	GPIO_CFG_GPIODIR1			(0x00000200)  /* R/W */
+#define	GPIO_CFG_GPIODIR0			(0x00000100)  /* R/W */
+#define	GPIO_CFG_GPIOD4				(0x00000010)  /* R/W */
+#define	GPIO_CFG_GPIOD3				(0x00000008)  /* R/W */
+#define	GPIO_CFG_GPIOD2				(0x00000004)  /* R/W */
+#define	GPIO_CFG_GPIOD1				(0x00000002)  /* R/W */
+#define	GPIO_CFG_GPIOD0				(0x00000001)  /* R/W */
+
+#define GPT_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define	GPT_CFG_TIMER_EN			(0x20000000)  /* R/W */
+#define	GPT_CFG_GPT_LOAD			(0x0000FFFF)  /* R/W */
+
+#define GPT_CNT			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define	GPT_CNT_GPT_CNT				(0x0000FFFF)  /* RO */
+
+#define ENDIAN			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
+#define FREE_RUN		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
+#define RX_DROP			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
+#define MAC_CSR_CMD		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define	 MAC_CSR_CMD_CSR_BUSY			(0x80000000)
+							/* Self Clearing */
+#define	 MAC_CSR_CMD_R_NOT_W			(0x40000000)  /* R/W */
+#define	 MAC_CSR_CMD_CSR_ADDR			(0x000000FF)  /* R/W */
+
+#define MAC_CSR_DATA		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
+#define AFC_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define		AFC_CFG_AFC_HI			(0x00FF0000)  /* R/W */
+#define		AFC_CFG_AFC_LO			(0x0000FF00)  /* R/W */
+#define		AFC_CFG_BACK_DUR		(0x000000F0)  /* R/W */
+#define		AFC_CFG_FCMULT			(0x00000008)  /* R/W */
+#define		AFC_CFG_FCBRD			(0x00000004)  /* R/W */
+#define		AFC_CFG_FCADD			(0x00000002)  /* R/W */
+#define		AFC_CFG_FCANY			(0x00000001)  /* R/W */
+
+#define E2P_CMD			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define		E2P_CMD_EPC_BUSY		(0x80000000)
+							/* Self Clearing */
+#define		E2P_CMD_EPC_CMD			(0x70000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_READ		(0x00000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_EWDS		(0x10000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_EWEN		(0x20000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_WRITE		(0x30000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_WRAL		(0x40000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_ERASE		(0x50000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_ERAL		(0x60000000)  /* R/W */
+#define		E2P_CMD_EPC_CMD_RELOAD		(0x70000000)  /* R/W */
+#define		E2P_CMD_EPC_TIMEOUT		(0x00000200)  /* RO */
+#define		E2P_CMD_MAC_ADDR_LOADED		(0x00000100)  /* RO */
+#define		E2P_CMD_EPC_ADDR		(0x000000FF)  /* R/W */
+
+#define E2P_DATA		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define	E2P_DATA_EEPROM_DATA			(0x000000FF)  /* R/W */
+/* end of LAN register offsets and bit definitions */
+
+/* MAC Control and Status registers */
+#define MAC_CR			(0x01)  /* R/W */
+
+/* MAC_CR - MAC Control Register */
+#define MAC_CR_RXALL			(0x80000000)
+/* TODO: delete this bit? It is not described in the data sheet. */
+#define MAC_CR_HBDIS			(0x10000000)
+#define MAC_CR_RCVOWN			(0x00800000)
+#define MAC_CR_LOOPBK			(0x00200000)
+#define MAC_CR_FDPX			(0x00100000)
+#define MAC_CR_MCPAS			(0x00080000)
+#define MAC_CR_PRMS			(0x00040000)
+#define MAC_CR_INVFILT			(0x00020000)
+#define MAC_CR_PASSBAD			(0x00010000)
+#define MAC_CR_HFILT			(0x00008000)
+#define MAC_CR_HPFILT			(0x00002000)
+#define MAC_CR_LCOLL			(0x00001000)
+#define MAC_CR_BCAST			(0x00000800)
+#define MAC_CR_DISRTY			(0x00000400)
+#define MAC_CR_PADSTR			(0x00000100)
+#define MAC_CR_BOLMT_MASK		(0x000000C0)
+#define MAC_CR_DFCHK			(0x00000020)
+#define MAC_CR_TXEN			(0x00000008)
+#define MAC_CR_RXEN			(0x00000004)
+
+#define ADDRH			(0x02)	  /* R/W mask 0x0000FFFFUL */
+#define ADDRL			(0x03)	  /* R/W mask 0xFFFFFFFFUL */
+#define HASHH			(0x04)	  /* R/W */
+#define HASHL			(0x05)	  /* R/W */
+
+#define MII_ACC			(0x06)	  /* R/W */
+#define MII_ACC_PHY_ADDR		(0x0000F800)
+#define MII_ACC_MIIRINDA		(0x000007C0)
+#define MII_ACC_MII_WRITE		(0x00000002)
+#define MII_ACC_MII_BUSY		(0x00000001)
+
+#define MII_DATA		(0x07)	  /* R/W mask 0x0000FFFFUL */
+
+#define FLOW			(0x08)	  /* R/W */
+#define FLOW_FCPT			(0xFFFF0000)
+#define FLOW_FCPASS			(0x00000004)
+#define FLOW_FCEN			(0x00000002)
+#define FLOW_FCBSY			(0x00000001)
+
+#define VLAN1			(0x09)	  /* R/W mask 0x0000FFFFUL */
+#define VLAN1_VTI1			(0x0000ffff)
+
+#define VLAN2			(0x0A)	  /* R/W mask 0x0000FFFFUL */
+#define VLAN2_VTI2			(0x0000ffff)
+
+#define WUFF			(0x0B)	  /* WO */
+
+#define WUCSR			(0x0C)	  /* R/W */
+#define WUCSR_GUE			(0x00000200)
+#define WUCSR_WUFR			(0x00000040)
+#define WUCSR_MPR			(0x00000020)
+#define WUCSR_WAKE_EN			(0x00000004)
+#define WUCSR_MPEN			(0x00000002)
+
+/* Chip ID values */
+#define CHIP_9115	0x115
+#define CHIP_9116	0x116
+#define CHIP_9117	0x117
+#define CHIP_9118	0x118
+#define CHIP_9215	0x115a
+#define CHIP_9216	0x116a
+#define CHIP_9217	0x117a
+#define CHIP_9218	0x118a
+
+struct chip_id {
+	u16 id;
+	char *name;
+};
+
+static const struct chip_id chip_ids[] =  {
+	{ CHIP_9115, "LAN9115" },
+	{ CHIP_9116, "LAN9116" },
+	{ CHIP_9117, "LAN9117" },
+	{ CHIP_9118, "LAN9118" },
+	{ CHIP_9215, "LAN9215" },
+	{ CHIP_9216, "LAN9216" },
+	{ CHIP_9217, "LAN9217" },
+	{ CHIP_9218, "LAN9218" },
+	{ 0, NULL },
+};
+
+#define DRIVERNAME "smc911x"
+
+u32 smc911x_get_mac_csr(u8 reg)
+{
+	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+	MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
+	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+
+	return MAC_CSR_DATA;
+}
+
+void smc911x_set_mac_csr(u8 reg, u32 data)
+{
+	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+	MAC_CSR_DATA = data;
+	MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
+	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); }
+
+static int smx911x_handle_mac_address(bd_t *bd)
+{
+	unsigned long addrh, addrl;
+	unsigned char *m = bd->bi_enetaddr;
+
+	/* if the environment has a valid mac address then use it */
+	if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
+		addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
+		addrh = m[4] | m[5] << 8;
+		smc911x_set_mac_csr(ADDRH, addrh);
+		smc911x_set_mac_csr(ADDRL, addrl);
+	} else {
+		/* if not, try to get one from the eeprom */
+		addrh = smc911x_get_mac_csr(ADDRH);
+		addrl = smc911x_get_mac_csr(ADDRL);
+
+		m[0] = (addrl) & 0xff;
+		m[1] = (addrl >>  8) & 0xff;
+		m[2] = (addrl >> 16) & 0xff;
+		m[3] = (addrl >> 24) & 0xff;
+		m[4] = (addrh) & 0xff;
+		m[5] = (addrh >>  8) & 0xff;
+
+		/* we get 0xff when there is no eeprom connected */
+		if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
+			printf(DRIVERNAME ": no valid mac address "
+				"in environment "
+				"and no eeprom found\n");
+			return -1;
+		}
+	}
+
+	printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+		m[0], m[1], m[2], m[3], m[4], m[5]);
+
+	return 0;
+}
+
+static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
+{
+	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+	smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
+
+	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+	*val = smc911x_get_mac_csr(MII_DATA);
+
+	return 0;
+}
+
+static int smc911x_miiphy_write(u8 phy, u8 reg, u16  val)
+{
+	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+	smc911x_set_mac_csr(MII_DATA, val);
+	smc911x_set_mac_csr(MII_ACC,
+		phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
+
+	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+	return 0;
+}
+
+static int smc911x_phy_reset(void)
+{
+	u32 reg;
+
+	reg = PMT_CTRL;
+	reg &= ~0xfffff030;
+	reg |= PMT_CTRL_PHY_RST;
+	PMT_CTRL = reg;
+
+	mdelay(100);
+
+	return 0;
+}
+
+static void smc911x_phy_configure(void)
+{
+	int timeout;
+	u16 status;
+
+	smc911x_phy_reset();
+
+	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
+	mdelay(1);
+	smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
+	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+	timeout = 5000;
+	do {
+		mdelay(1);
+		if ((timeout--) == 0)
+			goto err_out;
+
+		if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
+			goto err_out;
+	} while (!(status & PHY_BMSR_LS));
+
+	printf(DRIVERNAME ": phy initialized\n");
+
+	return;
+
+err_out:
+	printf(DRIVERNAME ": autonegotiation timed out\n"); }
+
+static void smc911x_reset(void)
+{
+	int timeout;
+
+	/* Take out of PM setting first */
+	if (PMT_CTRL & PMT_CTRL_READY) {
+		/* Write to the bytetest will take out of powerdown */
+		BYTE_TEST = 0x0;
+
+		timeout = 10;
+
+		while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
+			udelay(10);
+		if (!timeout) {
+			printf(DRIVERNAME
+				": timeout waiting for PM restore\n");
+			return;
+		}
+	}
+
+	/* Disable interrupts */
+	INT_EN = 0;
+
+	HW_CFG = HW_CFG_SRST;
+
+	timeout = 1000;
+	while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
+		udelay(10);
+
+	if (!timeout) {
+		printf(DRIVERNAME ": reset timeout\n");
+		return;
+	}
+
+	/* Reset the FIFO level and flow control settings */
+	smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
+	AFC_CFG = 0x0050287F;
+
+	/* Set to LED outputs */
+	GPIO_CFG = 0x70070000;
+}
+
+static void smc911x_enable(void)
+{
+	/* Enable TX */
+	HW_CFG = 8 << 16 | HW_CFG_SF;
+
+	GPT_CFG = GPT_CFG_TIMER_EN | 10000;
+
+	TX_CFG = TX_CFG_TX_ON;
+
+	/* no padding to start of packets */
+	RX_CFG = 0;
+
+	smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
+
+}
+
+int eth_init(bd_t *bd)
+{
+	unsigned long val, i;
+
+	printf(DRIVERNAME ": initializing\n");
+
+	val = BYTE_TEST;
+	if (val != 0x87654321) {
+		printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
+		goto err_out;
+	}
+
+	val = ID_REV >> 16;
+	for (i = 0; chip_ids[i].id != 0; i++) {
+		if (chip_ids[i].id == val)
+			break;
+	}
+	if (!chip_ids[i].id) {
+		printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
+		goto err_out;
+	}
+
+	printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
+
+	smc911x_reset();
+
+	/* Configure the PHY, initialize the link state */
+	smc911x_phy_configure();
+
+	if (smx911x_handle_mac_address(bd))
+		goto err_out;
+
+	/* Turn on Tx + Rx */
+	smc911x_enable();
+
+	return 0;
+
+err_out:
+	return -1;
+}
+
+int eth_send(volatile void *packet, int length)
+{
+	u32 *data = (u32 *)packet;
+	u32 tmplen;
+	u32 status;
+
+	TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
+	TX_DATA_FIFO = length;
+
+	tmplen = (length + 3) / 4;
+
+	while (tmplen--)
+		TX_DATA_FIFO = *data++;
+
+	/* wait for transmission */
+	while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));
+
+	/* get status. Ignore 'no carrier' error, it has no meaning for
+	 * full duplex operation
+	 */
+	status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
+		TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
+
+	if (!status)
+		return 0;
+
+	printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
+		status & TX_STS_LOC ? "TX_STS_LOC " : "",
+		status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
+		status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
+		status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
+		status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
+
+	return -1;
+}
+
+void eth_halt(void)
+{
+	smc911x_reset();
+}
+
+int eth_rx(void)
+{
+	u32 *data = (u32 *)NetRxPackets[0];
+	u32 pktlen, tmplen;
+	u32 status;
+
+	if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
+		status = RX_STATUS_FIFO;
+		pktlen = (status & RX_STS_PKT_LEN) >> 16;
+
+		RX_CFG = 0;
+
+		tmplen = (pktlen + 2 + 3) / 4;
+		while (tmplen--)
+			*data++ = RX_DATA_FIFO;
+
+		if (status & RX_STS_ES)
+			printf(DRIVERNAME
+				": dropped bad packet. Status: 0x%08x\n",
+				status);
+		else
+			NetReceive(NetRxPackets[0], pktlen);
+	}
+
+	return 0;
+}
+
+#endif				/* CONFIG_DRIVER_SMC911X */
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index ebcdcfea1e..2b3eb90c32 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -150,6 +150,8 @@ typedef volatile unsigned int *	dv_reg_p;
 
 #define VDD3P3V_PWDN			(0x01c40048)
 #define UART0_PWREMU_MGMT		(0x01c20030)
+#define UART1_PWREMU_MGMT		(0x01c20430)
+#define UART2_PWREMU_MGMT		(0x01c20830)
 
 #define PSC_SILVER_BULLET		(0x01c41a20)
 
diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
new file mode 100644
index 0000000000..2f0d80902a
--- /dev/null
+++ b/include/asm-arm/arch-mx31/mx31-regs.h
@@ -0,0 +1,151 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MX31_REGS_H
+#define __ASM_ARCH_MX31_REGS_H
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+#define __REG16(x)   (*((volatile u16 *)(x)))
+#define __REG8(x)    (*((volatile u8 *)(x)))
+
+#define CCM_BASE	0x53f80000
+#define CCM_CCMR	(CCM_BASE + 0x00)
+#define CCM_PDR0	(CCM_BASE + 0x04)
+#define CCM_PDR1	(CCM_BASE + 0x08)
+#define CCM_RCSR	(CCM_BASE + 0x0c)
+#define CCM_MPCTL	(CCM_BASE + 0x10)
+#define CCM_UPCTL	(CCM_BASE + 0x10)
+#define CCM_SPCTL	(CCM_BASE + 0x18)
+#define CCM_COSR	(CCM_BASE + 0x1C)
+
+#define CCMR_MDS	(1 << 7)
+#define CCMR_SBYCS	(1 << 4)
+#define CCMR_MPE	(1 << 3)
+#define CCMR_PRCS_MASK	(3 << 1)
+#define CCMR_FPM	(1 << 1)
+#define CCMR_CKIH	(2 << 1)
+
+#define PDR0_CSI_PODF(x)	(((x) & 0x1ff) << 23)
+#define PDR0_PER_PODF(x)	(((x) & 0x1f) << 16)
+#define PDR0_HSP_PODF(x)	(((x) & 0x7) << 11)
+#define PDR0_NFC_PODF(x)	(((x) & 0x7) << 8)
+#define PDR0_IPG_PODF(x)	(((x) & 0x3) << 6)
+#define PDR0_MAX_PODF(x)	(((x) & 0x7) << 3)
+#define PDR0_MCU_PODF(x)	((x) & 0x7)
+
+#define PLL_PD(x)		(((x) & 0xf) << 26)
+#define PLL_MFD(x)		(((x) & 0x3ff) << 16)
+#define PLL_MFI(x)		(((x) & 0xf) << 10)
+#define PLL_MFN(x)		(((x) & 0x3ff) << 0)
+
+#define WEIM_BASE	0xb8002000
+#define CSCR_U(x)	(WEIM_BASE + (x) * 0x10)
+#define CSCR_L(x)	(WEIM_BASE + 4 + (x) * 0x10)
+#define CSCR_A(x)	(WEIM_BASE + 8 + (x) * 0x10)
+
+#define IOMUXC_BASE	0x43FAC000
+#define IOMUXC_GPR	(IOMUXC_BASE + 0x8)
+#define IOMUXC_SW_MUX_CTL(x)	(IOMUXC_BASE + 0xc + (x) * 4)
+#define IOMUXC_SW_PAD_CTL(x)	(IOMUXC_BASE + 0x154 + (x) * 4)
+
+#define IPU_BASE		0x53fc0000
+#define IPU_CONF		IPU_BASE
+
+#define IPU_CONF_PXL_ENDIAN	(1<<8)
+#define IPU_CONF_DU_EN		(1<<7)
+#define IPU_CONF_DI_EN		(1<<6)
+#define IPU_CONF_ADC_EN		(1<<5)
+#define IPU_CONF_SDC_EN		(1<<4)
+#define IPU_CONF_PF_EN		(1<<3)
+#define IPU_CONF_ROT_EN		(1<<2)
+#define IPU_CONF_IC_EN		(1<<1)
+#define IPU_CONF_SCI_EN		(1<<0)
+
+#define WDOG_BASE		0x53FDC000
+
+/*
+ * Signal Multiplexing (IOMUX)
+ */
+
+/* bits in the SW_MUX_CTL registers */
+#define MUX_CTL_OUT_GPIO_DR	(0 << 4)
+#define MUX_CTL_OUT_FUNC	(1 << 4)
+#define MUX_CTL_OUT_ALT1	(2 << 4)
+#define MUX_CTL_OUT_ALT2	(3 << 4)
+#define MUX_CTL_OUT_ALT3	(4 << 4)
+#define MUX_CTL_OUT_ALT4	(5 << 4)
+#define MUX_CTL_OUT_ALT5	(6 << 4)
+#define MUX_CTL_OUT_ALT6	(7 << 4)
+#define MUX_CTL_IN_NONE		(0 << 0)
+#define MUX_CTL_IN_GPIO		(1 << 0)
+#define MUX_CTL_IN_FUNC		(2 << 0)
+#define MUX_CTL_IN_ALT1		(4 << 0)
+#define MUX_CTL_IN_ALT2		(8 << 0)
+
+#define MUX_CTL_FUNC		(MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC)
+#define MUX_CTL_ALT1		(MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1)
+#define MUX_CTL_ALT2		(MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2)
+#define MUX_CTL_GPIO		(MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO)
+
+/* Register offsets based on IOMUXC_BASE */
+/* 0x00 .. 0x7b */
+#define MUX_CTL_RTS1		0x7c
+#define MUX_CTL_CTS1		0x7d
+#define MUX_CTL_DTR_DCE1	0x7e
+#define MUX_CTL_DSR_DCE1	0x7f
+#define MUX_CTL_CSPI2_SCLK	0x80
+#define MUX_CTL_CSPI2_SPI_RDY	0x81
+#define MUX_CTL_RXD1		0x82
+#define MUX_CTL_TXD1		0x83
+#define MUX_CTL_CSPI2_MISO	0x84
+/* 0x85 .. 0x8a */
+#define MUX_CTL_CSPI2_MOSI	0x8b
+
+/* The modes a specific pin can be in
+ * these macros can be used in mx31_gpio_mux() and have the form
+ * MUX_[contact name]__[pin function]
+ */
+#define MUX_RXD1__UART1_RXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
+#define MUX_TXD1__UART1_TXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
+#define MUX_RTS1__UART1_RTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
+#define MUX_RTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
+
+#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
+#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE	0x70000000
+#define CSD0_BASE	0x80000000
+#define CSD1_BASE	0x90000000
+#define CS0_BASE	0xA0000000
+#define CS1_BASE	0xA8000000
+#define CS2_BASE	0xB0000000
+#define CS3_BASE	0xB2000000
+#define CS4_BASE	0xB4000000
+#define CS4_PSRAM_BASE	0xB5000000
+#define CS5_BASE	0xB6000000
+#define PCMCIA_MEM_BASE	0xC0000000
+
+#endif /* __ASM_ARCH_MX31_REGS_H */
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
new file mode 100644
index 0000000000..f89a401bbc
--- /dev/null
+++ b/include/asm-arm/arch-mx31/mx31.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MX31_H
+#define __ASM_ARCH_MX31_H
+
+u32 mx31_get_mpl_dpdgck_clk(void);
+u32 mx31_get_mcu_main_clk(void);
+u32 mx31_get_ipg_clk(void);
+void mx31_gpio_mux(unsigned long mode);
+
+#endif /* __ASM_ARCH_MX31_H */
diff --git a/include/asm-arm/arch-arm1136/bits.h b/include/asm-arm/arch-omap24xx/bits.h
index 8522335bfc..8522335bfc 100644
--- a/include/asm-arm/arch-arm1136/bits.h
+++ b/include/asm-arm/arch-omap24xx/bits.h
diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h
index 2a95af1810..2a95af1810 100644
--- a/include/asm-arm/arch-arm1136/clocks.h
+++ b/include/asm-arm/arch-omap24xx/clocks.h
diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h
index 7248950e52..7248950e52 100644
--- a/include/asm-arm/arch-arm1136/i2c.h
+++ b/include/asm-arm/arch-omap24xx/i2c.h
diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-omap24xx/mem.h
index c81f1c4370..c81f1c4370 100644
--- a/include/asm-arm/arch-arm1136/mem.h
+++ b/include/asm-arm/arch-omap24xx/mem.h
diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-omap24xx/mux.h
index 4fdb9c635f..4fdb9c635f 100644
--- a/include/asm-arm/arch-arm1136/mux.h
+++ b/include/asm-arm/arch-omap24xx/mux.h
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-omap24xx/omap2420.h
index 0c11beccf6..0c11beccf6 100644
--- a/include/asm-arm/arch-arm1136/omap2420.h
+++ b/include/asm-arm/arch-omap24xx/omap2420.h
diff --git a/include/asm-arm/arch-arm1136/sizes.h b/include/asm-arm/arch-omap24xx/sizes.h
index aaba18f150..aaba18f150 100644
--- a/include/asm-arm/arch-arm1136/sizes.h
+++ b/include/asm-arm/arch-omap24xx/sizes.h
diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-omap24xx/sys_info.h
index 53c231a5e4..53c231a5e4 100644
--- a/include/asm-arm/arch-arm1136/sys_info.h
+++ b/include/asm-arm/arch-omap24xx/sys_info.h
diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-omap24xx/sys_proto.h
index 9d8e5b2622..9d8e5b2622 100644
--- a/include/asm-arm/arch-arm1136/sys_proto.h
+++ b/include/asm-arm/arch-omap24xx/sys_proto.h
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 8ecd0595a2..17d3b03dd5 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,6 +52,9 @@
 #define DV_EVM
 #define CFG_NAND_SMALLPAGE
 #define CFG_USE_NOR
+#define CFG_USE_INTEL_NOR	/* Define this when your DVEVM has Intel
+				 * flash instead of AMD flash
+				 */
 /*===================*/
 /* SoC Configuration */
 /*===================*/
@@ -60,6 +63,24 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
+#define CFG_DAVINCI_PINMUX_0	0x00000c1f
+#define CFG_DAVINCI_WAITCFG	0x00000000
+#define CFG_DAVINCI_ACFG2	0x3ffffffd	/* CE configs */
+#define CFG_DAVINCI_ACFG3	0x3ffffffd
+#define CFG_DAVINCI_ACFG4	0x3ffffffd
+#define CFG_DAVINCI_ACFG5	0x3ffffffd
+#undef	CFG_DAVINCI_NANDCE		/* When using NAND, define 2,3 or 4 */
+#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
+#define CFG_DAVINCI_SDREF	0x000005c3
+#define CFG_DAVINCI_SDCFG	0x00178632	/* 8 banks */
+#define CFG_DAVINCI_SDTIM0	0x28923211
+#define CFG_DAVINCI_SDTIM1	0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0	0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM	0x15
+#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
@@ -114,7 +135,7 @@
 #ifdef CFG_USE_NAND
 #undef CFG_ENV_IS_IN_FLASH
 #define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
+#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash */
 #ifdef CFG_NAND_SMALLPAGE
 #define CFG_ENV_SECT_SIZE	512	/* Env sector Size */
 #define CFG_ENV_SIZE		SZ_16K
@@ -139,24 +160,31 @@
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CFG_ENV_IS_IN_FLASH
-#undef CFG_NO_FLASH
+#undef	CFG_NO_FLASH
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
 #define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_FLASH_SECT_SZ	0x10000		/* 64KB sect size AMD Flash */
-#define CFG_ENV_OFFSET		(CFG_FLASH_SECT_SZ*3)
-#define PHYS_FLASH_1		0x02000000	/* CS2 Base address 	 */
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
+#define CFG_ENV_OFFSET		(CFG_ENV_ADDR)
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define PHYS_FLASH_1		0x02000000	/* CS2 Base address */
 #define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB 	 */
+#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB */
 #define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
 #define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
+#ifdef CFG_USE_INTEL_NOR
+#define CFG_FLASH_SECT_SZ	0x20000	/* 128KB sect size INTEL Flash */
+#define CFG_FLASH_PROTECTION	1
+#else
+#define CFG_FLASH_SECT_SZ	0x10000	/* 64KB sect size AMD Flash */
+#endif
 #endif
 /*==============================*/
 /* U-Boot general configuration */
 /*==============================*/
-#undef 	CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
+#undef	CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
 #define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
+#undef	CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
 #define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
 #define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 96c9a30147..cb69535e14 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -35,6 +35,24 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
+#define CFG_DAVINCI_PINMUX_0	0x00000c1f
+#define CFG_DAVINCI_WAITCFG	0x00000000
+#define CFG_DAVINCI_ACFG2	0x0432229c	/* CE configs */
+#define CFG_DAVINCI_ACFG3	0x3ffffffd
+#define CFG_DAVINCI_ACFG4	0x3ffffffd
+#define CFG_DAVINCI_ACFG5	0x3ffffffd
+#define CFG_DAVINCI_NANDCE	2 	/* When using NAND, define 2,3 or 4 */
+#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
+#define CFG_DAVINCI_SDREF	0x000005c3
+#define CFG_DAVINCI_SDCFG	0x00178622	/* 4 banks */
+#define CFG_DAVINCI_SDTIM0	0x28923211
+#define CFG_DAVINCI_SDTIM1	0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0	0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM	0x15
+#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*=============*/
 /* Memory Info */
 /*=============*/
@@ -46,7 +64,6 @@
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
-#define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
 /*====================*/
 /* Serial Driver info */
 /*====================*/
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index de8c4fac2b..b2c0d7d175 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -60,6 +60,24 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
+#define CFG_DAVINCI_PINMUX_0	0x00000c1f
+#define CFG_DAVINCI_WAITCFG	0x00000000
+#define CFG_DAVINCI_ACFG2	0x3ffffffd	/* CE configs */
+#define CFG_DAVINCI_ACFG3	0x3ffffffd
+#define CFG_DAVINCI_ACFG4	0x3ffffffd
+#define CFG_DAVINCI_ACFG5	0x3ffffffd
+#undef  CFG_DAVINCI_NANDCE    		/* When using NAND, define 2,3 or 4 */
+#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
+#define CFG_DAVINCI_SDREF	0x000005c3
+#define CFG_DAVINCI_SDCFG	0x00178632	/* 8 banks */
+#define CFG_DAVINCI_SDTIM0	0x28923211
+#define CFG_DAVINCI_SDTIM1	0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0	0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM	0x15
+#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
new file mode 100644
index 0000000000..a6ed77a98b
--- /dev/null
+++ b/include/configs/imx31_litekit.h
@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Kshitij Gupta <kshitij@ti.com>
+ *
+ * Configuration settings for the 242x TI H4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
+#define CONFIG_MX31		1    /* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ	26000000
+#define CONFIG_MX31_CLK32	32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Temporarily disabled */
+#if 0
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_FIT			1
+#define CONFIG_FIT_VERBOSE		1
+#endif
+
+#define CONFIG_CMDLINE_TAG		1    /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_MX31_UART	1
+#define CFG_MX31_UART1		1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.23.168
+#define CONFIG_SERVERIP		192.168.23.2
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"bootargs_base=setenv bootargs console=ttySMX0,115200\0"	\
+	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
+		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0"	\
+	"bootcmd=run bootcmd_net\0"					\
+	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
+		"tftpboot 0x80000000 uImage-mx31; bootm\0"		\
+	"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; "	\
+		"protect off all; erase 0xa00d0000 0xa01effff; "	\
+		"cp.b 0x80000000 0xa00d0000 $(filesize)\0"
+
+#define CONFIG_DRIVER_SMC911X		1
+#define CONFIG_DRIVER_SMC911X_BASE	0xb4020000
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_PROMPT		"uboot> "
+#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS		16          /* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0  /* memtest works on */
+#define CFG_MEMTEST_END		0x10000
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		0 /* default load address */
+
+#define CFG_HZ			32000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		0x80000000
+#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE		0xa0000000
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+/* Monitor at beginning of flash */
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+
+#define CFG_ENV_ADDR		0xa01f0000
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	(64 * 1024)
+#define CFG_ENV_SIZE		(64 * 1024)
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV	"nor0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
new file mode 100644
index 0000000000..647b05b327
--- /dev/null
+++ b/include/configs/imx31_phycore.h
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Kshitij Gupta <kshitij@ti.com>
+ *
+ * Configuration settings for the 242x TI H4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
+#define CONFIG_MX31		1    /* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ	26000000
+#define CONFIG_MX31_CLK32	32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Temporarily disabled */
+#if 0
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_FIT			1
+#define CONFIG_FIT_VERBOSE		1
+#endif
+
+#define CONFIG_CMDLINE_TAG		1    /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_HARD_I2C		1
+#define CONFIG_I2C_MXC		1
+#define CFG_I2C_MX31_PORT2	1
+#define CFG_I2C_SPEED		100000
+#define CFG_I2C_SLAVE		0xfe
+
+#define CONFIG_MX31_UART	1
+#define CFG_MX31_UART1		1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+
+#define CONFIG_BOOTDELAY	3
+
+#define MTDPARTS_DEFAULT	\
+	"mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
+
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.23.168
+#define CONFIG_SERVERIP		192.168.23.2
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"bootargs_base=setenv bootargs console=ttySMX0,115200\0"	\
+	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
+		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
+	"bootargs_flash=setenv bootargs $(bootargs) "			\
+		"root=/dev/mtdblock2 rootfstype=jffs2\0"		\
+	"bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0"	\
+	"bootcmd=run bootcmd_net\0"			       		\
+	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " 	\
+		"tftpboot 0x80000000 $(uimage); bootm\0"		\
+	"bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; "	\
+		"bootm 0x80000000\0"					\
+	"unlock=yes\0"							\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
+	"prg_uboot=tftpboot 0x80000000 $(uboot); " 			\
+		"protect off 0xa0000000 +0x20000; "			\
+		"erase 0xa0000000 +0x20000; "				\
+		"cp.b 0x80000000 0xa0000000 $(filesize)\0" 		\
+	"prg_kernel=tftpboot 0x80000000 $(uimage); "			\
+		"erase 0xa0040000 +0x180000; "				\
+		"cp.b 0x80000000 0xa0040000 $(filesize)\0"		\
+	"prg_jffs2=tftpboot 0x80000000 $(jffs2); " 			\
+		"erase 0xa01c0000 0xa1ffffff; "				\
+		"cp.b 0x80000000 0xa01c0000 $(filesize)\0"
+
+#define CONFIG_DRIVER_SMC911X		1
+#define CONFIG_DRIVER_SMC911X_BASE	0xa8000000
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_PROMPT		"uboot> "
+#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS		16          /* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0  /* memtest works on */
+#define CFG_MEMTEST_END		0x10000
+
+#define CFG_LOAD_ADDR		0 /* default load address */
+
+#define CFG_HZ			32000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below  */
+#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		0x80000000
+#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE		0xa0000000
+#define CFG_MAX_FLASH_BANKS	1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	259 /* max number of sectors on one chip */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+
+#define	CFG_ENV_IS_IN_EEPROM		1
+#define CFG_ENV_OFFSET			0x00	/* environment starts here */
+#define CFG_ENV_SIZE			4096
+#define CFG_I2C_EEPROM_ADDR		0x52
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start */
+#define CFG_I2C_EEPROM_ADDR_LEN		2 /* length of byte address */
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV	"nor0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
new file mode 100644
index 0000000000..be7f3c6c03
--- /dev/null
+++ b/include/configs/mx31ads.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * Configuration settings for the MX31ADS Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx31-regs.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
+#define CONFIG_MX31		1	/* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
+#define CONFIG_MX31_CLK32	32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*
+ * Disabled for now due to build problems under Debian and
+ * a significant increase in the final file size: 144260 vs. 109536 Bytes
+ */
+#if 0
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_FIT			1
+#define CONFIG_FIT_VERBOSE		1
+#endif
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_MX31_UART	1
+#define CFG_MX31_UART1		1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.23.168
+#define CONFIG_SERVERIP		192.168.23.2
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
+	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
+		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
+	"bootcmd=run bootcmd_net\0"  					\
+	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " 	\
+		"tftpboot 0x80000000 uImage-mx31; bootm\0"		\
+	"prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " 		\
+		"protect off 0xa0000000 0xa001ffff; "			\
+		"erase 0xa0000000 0xa001ffff; "				\
+		"cp.b 0x80000000 0xa0000000 $(filesize)\0"
+
+#define CONFIG_DRIVER_CS8900	1
+#define CS8900_BASE		0xb4020300
+#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_PROMPT		"=> "
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0		/* memtest works on */
+#define CFG_MEMTEST_END		0x10000
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		CSD0_BASE	/* default load address */
+
+#define CFG_HZ			32000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below  */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE
+#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE		CS0_BASE
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	262	/* max number of sectors on one chip */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128KiB */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	(32 * 1024)
+#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
+/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end.
+ * The rest of 32MiB is in 128KiB big sectors.
+ * U-Boot occupies the low 4 sectors,
+ * if we put environment next to it, we will have to occupy 128KiB for it.
+ * Putting it at the top of flash we use only 32KiB. */
+#define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI			1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
+#if 0 /* Doesn't work yet, work in progress */
+#define CFG_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes(~10x faster)*/
+#endif
+#define CFG_FLASH_PROTECTION		1 /* Use hardware sector protection */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV	"nor0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h
new file mode 100644
index 0000000000..e170ee9ccd
--- /dev/null
+++ b/include/configs/pmdra.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl>
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*=======*/
+/* Board */
+/*=======*/
+#define CFG_PMDRA
+#define CFG_NAND_LARGEPAGE
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ	((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2)
+#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
+#define CFG_HZ			1000
+#define CFG_DAVINCI_PINMUX_0	0x00000c1f
+#define CFG_DAVINCI_WAITCFG	0x10000000
+#define CFG_DAVINCI_ACFG2	0x00460385	/* NOR CE Config */
+#define CFG_DAVINCI_ACFG3	0x0822218c	/* NAND CE Config */
+#define CFG_DAVINCI_ACFG4	0x3ffffffd
+#define CFG_DAVINCI_ACFG5	0x3ffffffd
+#define CFG_DAVINCI_NANDCE	3		/* Use CE3 for NAND */
+#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
+#define CFG_DAVINCI_SDREF	0x000005c3
+#define CFG_DAVINCI_SDCFG	0x00178832	/* 8 banks , CAS = 4*/
+#define CFG_DAVINCI_SDTIM0	0x28923211
+#define CFG_DAVINCI_SDTIM1	0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0	0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM	0x12
+#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2	0x01
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_I2C_EEPROM_ADDR		0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS	6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
+#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
+#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
+#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
+#define PHYS_SDRAM_1		0x80000000	/* DDR Start */
+#define PHYS_SDRAM_1_SIZE	0x10000000	/* DDR size 256MB */
+#define DDR_8BANKS				/* 8-bank DDR2 (256MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
+#define CFG_NS16550_COM2	0x01c20800	/* Base address of UART2 */
+#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
+#define CONFIG_BAUDRATE		115200		/* Default baud rate */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED		50000	/* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT	10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#define CFG_USE_NAND
+#define CFG_NAND_BASE		0x04000000
+#undef CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE	1		/* Max number of NAND devices */
+#define NAND_MAX_CHIPS		1
+#define DEF_BOOTM		""
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
+#define CFG_ENV_OFFSET		(CFG_ENV_ADDR)
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/
+#define PHYS_FLASH_1		0x02000000	/* CS2 Base address */
+#define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
+#define CFG_FLASH_SECT_SZ	0x20000	/* 128KB sect size INTEL Flash */
+#define CFG_FLASH_PROTECTION	1
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR	0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_ENV_OVERWRITE
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR	0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	2
+#define CONFIG_BOOTARGS	\
+	"mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND	"run nand"
+#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
+#endif
+#endif /* __CONFIG_H */