Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx

Conflicts:

	include/asm-ppc/fsl_lbc.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

103 files changed, 3221 insertions, 1561 deletions

diff --git a/MAKEALL b/MAKEALL
index c751586a83..8a0233cca2 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -361,6 +361,7 @@ LIST_85xx="		\
 	stxssa		\
 	TQM8540		\
 	TQM8541		\
+	TQM8548		\
 	TQM8555		\
 	TQM8560		\
 "
diff --git a/Makefile b/Makefile
index fd9c94961f..ac129e46c2 100644
--- a/Makefile
+++ b/Makefile
@@ -486,7 +486,7 @@ PATI_config:		unconfig
 #########################################################################
 
 aev_config: unconfig
-	@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 
 BC3450_config:	unconfig
 	@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
@@ -640,13 +640,13 @@ PM520_ROMBOOT_DDR_config:	unconfig
 	@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 
 smmaco4_config: unconfig
-	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 
 cm5200_config:	unconfig
 	@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 
 spieval_config:	unconfig
-	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 
 TB5200_B_config \
 TB5200_config:	unconfig
@@ -655,7 +655,7 @@ TB5200_config:	unconfig
 		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
 		  $(XECHO) "... with MPC5200B processor" ; \
 		}
-	@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 
 MINI5200_config	\
 EVAL5200_config	\
@@ -704,7 +704,7 @@ TQM5200_B_HIGHBOOT_config \
 TQM5200_config	\
 TQM5200_STK100_config:	unconfig
 	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/tqm5200
+	@mkdir -p $(obj)board/tqc/tqm5200
 	@[ -z "$(findstring cam5200,$@)" ] || \
 		{ echo "#define CONFIG_CAM5200"	>>$(obj)include/config.h ; \
 		  echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
@@ -737,7 +737,7 @@ TQM5200_STK100_config:	unconfig
 	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
 		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 		}
-	@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 uc101_config:		unconfig
 	@$(MKCONFIG) uc101 ppc mpc5xxx uc101
 motionpro_config:	unconfig
@@ -830,7 +830,7 @@ hermes_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 
 HMI10_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 
 IAD210_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
@@ -1059,7 +1059,7 @@ RRvision_LCD_config:	unconfig
 	@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
 
 SM850_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 
 spc1920_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
@@ -1109,13 +1109,13 @@ virtlab2_config:	unconfig
 		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
 		  $(XECHO) "... with LCD display" ; \
 		}
-	@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
+	@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
 
 TTTech_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_LCD" >$(obj)include/config.h
 	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
 
 uc100_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
@@ -1130,7 +1130,7 @@ wtk_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_LCD" >$(obj)include/config.h
 	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
 
 #########################################################################
 ## PPC4xx Systems
@@ -1784,10 +1784,10 @@ TQM8265_AA_config:  unconfig
 		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
 		$(XECHO) "... without 60x Bus Mode" ; \
 	fi
-	@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
+	@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
 
 TQM8272_config: unconfig
-	@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272
+	@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
 
 VoVPN-GW_66MHz_config	\
 VoVPN-GW_100MHz_config:		unconfig
@@ -2114,7 +2114,7 @@ sbc8349_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
 
 TQM834x_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
 
 
 #########################################################################
@@ -2233,6 +2233,7 @@ stxssa_4M_config:	unconfig
 
 TQM8540_config		\
 TQM8541_config		\
+TQM8548_config		\
 TQM8555_config		\
 TQM8560_config:		unconfig
 	@mkdir -p $(obj)include
@@ -2241,9 +2242,8 @@ TQM8560_config:		unconfig
 	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
-	echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
+	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
 #########################################################################
 ## MPC86xx Systems
diff --git a/board/atum8548/law.c b/board/atum8548/law.c
index 3606cbb52f..b66fd7b297 100644
--- a/board/atum8548/law.c
+++ b/board/atum8548/law.c
@@ -48,14 +48,14 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW_ENTRY(8, CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c
index 785576a35a..3b8bd05ad1 100644
--- a/board/freescale/mpc8540ads/law.c
+++ b/board/freescale/mpc8540ads/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index a951b9e9a3..051f98570f 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -41,12 +41,6 @@ void local_bus_init(void);
 void sdram_init(void);
 long int fixed_sdram(void);
 
-
-int board_early_init_f (void)
-{
-    return 0;
-}
-
 int checkboard (void)
 {
 	puts("Board: ADS\n");
@@ -230,42 +224,6 @@ sdram_init(void)
 	udelay(100);
 }
 
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
diff --git a/board/freescale/mpc8541cds/law.c b/board/freescale/mpc8541cds/law.c
index 0ac223c53c..fbf2bdc07f 100644
--- a/board/freescale/mpc8541cds/law.c
+++ b/board/freescale/mpc8541cds/law.c
@@ -47,12 +47,12 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 62c8d63cdc..420a89ab1f 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -196,11 +196,6 @@ const iop_conf_t iop_conf_tab[4][32] = {
     }
 };
 
-int board_early_init_f (void)
-{
-	return 0;
-}
-
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
@@ -425,45 +420,6 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_PCI)
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it.
diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c
index 433e509fc0..a82dedea3b 100644
--- a/board/freescale/mpc8544ds/law.c
+++ b/board/freescale/mpc8544ds/law.c
@@ -28,15 +28,15 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(4, CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(5, CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(6, CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(7, CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW_ENTRY(8, CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
 	/* contains both PCIE3 MEM & IO space */
-	SET_LAW_ENTRY(9, CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index dd10af8092..5041426edc 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -40,11 +40,6 @@ extern void ddr_enable_ecc(unsigned int dram_size);
 
 void sdram_init(void);
 
-int board_early_init_f (void)
-{
-	return 0;
-}
-
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
@@ -83,45 +78,6 @@ initdram(int board_type)
 	return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
 #endif
diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c
index 0ee53e2c13..34b9d1c4df 100644
--- a/board/freescale/mpc8548cds/law.c
+++ b/board/freescale/mpc8548cds/law.c
@@ -52,21 +52,21 @@
 
 struct law_entry law_table[] = {
 #ifdef CFG_PCI1_MEM_PHYS
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
 #endif
 #ifdef CFG_PCI2_MEM_PHYS
-	SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 #endif
 #ifdef CFG_PCIE1_MEM_PHYS
-	SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 #endif
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW_ENTRY(8, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 #ifdef CFG_RIO_MEM_PHYS
-	SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
 };
 
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index efe2a3a3de..ad29734b20 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -45,11 +45,6 @@ DECLARE_GLOBAL_DATA_PTR;
 void local_bus_init(void);
 void sdram_init(void);
 
-int board_early_init_f (void)
-{
-	return 0;
-}
-
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
@@ -250,45 +245,6 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it.
diff --git a/board/freescale/mpc8555cds/law.c b/board/freescale/mpc8555cds/law.c
index 0ac223c53c..fbf2bdc07f 100644
--- a/board/freescale/mpc8555cds/law.c
+++ b/board/freescale/mpc8555cds/law.c
@@ -47,12 +47,12 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 8acbba4208..74e20cb23f 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -194,11 +194,6 @@ const iop_conf_t iop_conf_tab[4][32] = {
     }
 };
 
-int board_early_init_f (void)
-{
-	return 0;
-}
-
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
@@ -422,45 +417,6 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_PCI
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it
diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c
index 785576a35a..3b8bd05ad1 100644
--- a/board/freescale/mpc8560ads/law.c
+++ b/board/freescale/mpc8560ads/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 8d4b8a8b5a..144b584800 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -212,12 +212,6 @@ typedef struct bcsr_ {
 	volatile unsigned char bcsr5;
 } bcsr_t;
 
-
-int board_early_init_f (void)
-{
-    return 0;
-}
-
 void reset_phy (void)
 {
 #if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
@@ -433,42 +427,6 @@ sdram_init(void)
 	udelay(100);
 }
 
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
index 5e96ea73a2..3bc24c5c9b 100644
--- a/board/freescale/mpc8568mds/law.c
+++ b/board/freescale/mpc8568mds/law.c
@@ -50,13 +50,13 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(6, CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 	/* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
-	SET_LAW_ENTRY(7, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 4568aa1df5..f1928abf98 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -292,45 +292,6 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_PCI)
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc8568mds_config_table[] = {
diff --git a/board/freescale/mpc8610hpcd/law.c b/board/freescale/mpc8610hpcd/law.c
index b4d222d1ae..91b922b86b 100644
--- a/board/freescale/mpc8610hpcd/law.c
+++ b/board/freescale/mpc8610hpcd/law.c
@@ -29,16 +29,16 @@
 
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(3, CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW_ENTRY(4, PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW_ENTRY(6, CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW_ENTRY(7, CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(8, CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(9, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
+	SET_LAW(CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 245f420576..2d6c3c1759 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -47,18 +47,18 @@
 
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(3, CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(4, PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(5, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(6, CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(7, (CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW((CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW_ENTRY(8, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
 #endif
-	SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/mpc8540eval/law.c b/board/mpc8540eval/law.c
index 273ec5c06f..cfcd73e9e1 100644
--- a/board/mpc8540eval/law.c
+++ b/board/mpc8540eval/law.c
@@ -43,11 +43,11 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
 #ifndef CONFIG_RAM_AS_FLASH
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
 #endif
 };
 
diff --git a/board/pm854/law.c b/board/pm854/law.c
index cb6b37f95d..d74d17abdf 100644
--- a/board/pm854/law.c
+++ b/board/pm854/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/pm856/law.c b/board/pm856/law.c
index cb6b37f95d..d74d17abdf 100644
--- a/board/pm856/law.c
+++ b/board/pm856/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c
index bcf3468ba6..ab54260b06 100644
--- a/board/sbc8548/law.c
+++ b/board/sbc8548/law.c
@@ -46,12 +46,12 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW_ENTRY(4, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c
index e370853e96..10dedb481c 100644
--- a/board/sbc8560/law.c
+++ b/board/sbc8560/law.c
@@ -51,10 +51,10 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index d403873d9e..801c5b75f7 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -44,15 +44,15 @@
 
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(3, CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(4, 0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(5, CFG_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(6, CFG_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(7, 0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(8, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-	SET_LAW_ENTRY(9, CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+	SET_LAW(CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/socrates/Makefile b/board/socrates/Makefile
index 6453f2480f..11503ebe17 100644
--- a/board/socrates/Makefile
+++ b/board/socrates/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 #
 
-COBJS	:= $(BOARD).o law.o tlb.o sdram.o
+COBJS	:= $(BOARD).o law.o tlb.o sdram.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/socrates/config.mk b/board/socrates/config.mk
index 1cf5d380df..4f1729440a 100644
--- a/board/socrates/config.mk
+++ b/board/socrates/config.mk
@@ -25,6 +25,5 @@
 #
 # socrates board
 # default CCARBAR is at 0xff700000
-# assume U-Boot is less than 256k
 #
-TEXT_BASE = 0xfffc0000
+TEXT_BASE = 0xfffa0000
diff --git a/board/socrates/law.c b/board/socrates/law.c
index 5f4b8ca4f9..35c4a900a9 100644
--- a/board/socrates/law.c
+++ b/board/socrates/law.c
@@ -33,13 +33,12 @@
 /*
  * LAW(Local Access Window) configuration:
  *
- * 0x0000_0000	   0x7fff_ffff	   DDR			   2G
+ * 0x0000_0000	   0x2fff_ffff	   DDR			   512M
  * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
- * 0xc000_0000	   0xdfff_ffff	   RapidIO		   512M
- * 0xe000_0000	   0xe000_ffff	   CCSR			   1M
+ * 0xc000_0000	   0xc00f_ffff	   FPGA			   1M
+ * 0xe000_0000	   0xe00f_ffff	   CCSR			   1M (mapped by CCSRBAR)
  * 0xe200_0000	   0xe2ff_ffff	   PCI1 IO		   16M
- * 0xf800_0000	   0xf80f_ffff	   BCSR			   1M
- * 0xfe00_0000	   0xffff_ffff	   FLASH (boot bank)	   32M
+ * 0xfc00_0000	   0xffff_ffff	   FLASH		   64M
  *
  * Notes:
  *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
@@ -47,11 +46,13 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+#if defined(CFG_FPGA_BASE)
+	SET_LAW(CFG_FPGA_BASE, LAWAR_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/socrates/nand.c b/board/socrates/nand.c
new file mode 100644
index 0000000000..fc82ecbb73
--- /dev/null
+++ b/board/socrates/nand.c
@@ -0,0 +1,218 @@
+/*
+ * (C) Copyright 2008
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CFG_NAND_BASE)
+#include <nand.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+static int state;
+static void nand_write_byte(struct mtd_info *mtd, u_char byte);
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
+static void nand_write_word(struct mtd_info *mtd, u16 word);
+static u_char nand_read_byte(struct mtd_info *mtd);
+static u16 nand_read_word(struct mtd_info *mtd);
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
+static int nand_device_ready(struct mtd_info *mtdinfo);
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd);
+
+#define FPGA_NAND_CMD_MASK		(0x7 << 28)
+#define FPGA_NAND_CMD_COMMAND	(0x0 << 28)
+#define FPGA_NAND_CMD_ADDR		(0x1 << 28)
+#define FPGA_NAND_CMD_READ		(0x2 << 28)
+#define FPGA_NAND_CMD_WRITE		(0x3 << 28)
+#define FPGA_NAND_BUSY			(0x1 << 15)
+#define FPGA_NAND_ENABLE		(0x1 << 31)
+#define FPGA_NAND_DATA_SHIFT	16
+
+/**
+ * nand_write_byte -  write one byte to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ */
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	nand_write_buf(mtd, (const uchar *)&byte, sizeof(byte));
+}
+
+/**
+ * nand_write_word -  write one word to the chip
+ * @mtd:	MTD device structure
+ * @word:	data word to write
+ */
+static void nand_write_word(struct mtd_info *mtd, u16 word)
+{
+	nand_write_buf(mtd, (const uchar *)&word, sizeof(word));
+}
+
+/**
+ * nand_write_buf -  write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ */
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	long val;
+
+	if ((state & FPGA_NAND_CMD_MASK) == FPGA_NAND_CMD_MASK) {
+		/* Write data */
+		val = (state & FPGA_NAND_ENABLE) | FPGA_NAND_CMD_WRITE;
+	} else {
+		/* Write address or command */
+		val = state;
+	}
+
+	for (i = 0; i < len; i++) {
+		out_be32(this->IO_ADDR_W, val | (buf[i] << FPGA_NAND_DATA_SHIFT));
+	}
+}
+
+
+/**
+ * nand_read_byte -  read one byte from the chip
+ * @mtd:	MTD device structure
+ */
+static u_char nand_read_byte(struct mtd_info *mtd)
+{
+	u8 byte;
+	nand_read_buf(mtd, (uchar *)&byte, sizeof(byte));
+	return byte;
+}
+
+/**
+ * nand_read_word -  read one word from the chip
+ * @mtd:	MTD device structure
+ */
+static u16 nand_read_word(struct mtd_info *mtd)
+{
+	u16 word;
+	nand_read_buf(mtd, (uchar *)&word, sizeof(word));
+	return word;
+}
+
+/**
+ * nand_read_buf -  read chip data into buffer
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ */
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	int val;
+
+	val = (state & FPGA_NAND_ENABLE) | FPGA_NAND_CMD_READ;
+
+	out_be32(this->IO_ADDR_W, val);
+	for (i = 0; i < len; i++) {
+		buf[i] = (in_be32(this->IO_ADDR_R) >> FPGA_NAND_DATA_SHIFT) & 0xff;
+	}
+}
+
+/**
+ * nand_verify_buf -  Verify chip data against buffer
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ */
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (buf[i] != nand_read_byte(mtd));
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * nand_device_ready - Check the NAND device is ready for next command.
+ * @mtd:	MTD device structure
+ */
+static int nand_device_ready(struct mtd_info *mtdinfo)
+{
+	struct nand_chip *this = mtdinfo->priv;
+
+	if (in_be32(this->IO_ADDR_W) & FPGA_NAND_BUSY)
+		return 0; /* busy */
+	return 1;
+}
+
+/**
+ * nand_hwcontrol - NAND control functions wrapper.
+ * @mtd:	MTD device structure
+ * @cmd:	Command
+ */
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+
+	switch(cmd) {
+	case NAND_CTL_CLRALE:
+		state |= FPGA_NAND_CMD_MASK; /* use all 1s to mark */
+		break;
+	case NAND_CTL_CLRCLE:
+		state |= FPGA_NAND_CMD_MASK; /* use all 1s to mark */
+		break;
+	case NAND_CTL_SETCLE:
+		state = (state & ~FPGA_NAND_CMD_MASK) | FPGA_NAND_CMD_COMMAND;
+		break;
+	case NAND_CTL_SETALE:
+		state = (state & ~FPGA_NAND_CMD_MASK) | FPGA_NAND_CMD_ADDR;
+		break;
+	case NAND_CTL_SETNCE:
+		state |= FPGA_NAND_ENABLE;
+		break;
+	case NAND_CTL_CLRNCE:
+		state &= ~FPGA_NAND_ENABLE;
+		break;
+	default:
+		printf("%s: unknown cmd %#x\n", __FUNCTION__, cmd);
+		break;
+	}
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->hwcontrol = nand_hwcontrol;
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->dev_ready = nand_device_ready;
+	nand->write_byte = nand_write_byte;
+	nand->read_byte = nand_read_byte;
+	nand->write_word = nand_write_word;
+	nand->read_word = nand_read_word;
+	nand->write_buf = nand_write_buf;
+	nand->read_buf = nand_read_buf;
+	nand->verify_buf = nand_verify_buf;
+
+	return 0;
+}
+
+#endif
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 15c647884b..d791f1135f 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -35,7 +35,11 @@
 #include <flash.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <asm/io.h>
 
+#if defined(CFG_FPGA_BASE)
+#include "upm_table.h"
+#endif
 DECLARE_GLOBAL_DATA_PTR;
 
 extern flash_info_t flash_info[];	/* FLASH chips info */
@@ -58,7 +62,8 @@ int checkboard (void)
 	putc('\n');
 
 #ifdef CONFIG_PCI
-	if (gur->porpllsr & (1<<15)) {
+	/* Check the PCI_clk sel bit */
+	if (in_be32(&gur->porpllsr) & (1<<15)) {
 		src = "SYSCLK";
 		f = CONFIG_SYS_CLK_FREQ;
 	} else {
@@ -74,7 +79,10 @@ int checkboard (void)
 	 * Initialize local bus.
 	 */
 	local_bus_init ();
-
+#if defined(CFG_FPGA_BASE)
+	/* Init UPMA for FPGA access */
+	upmconfig(UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));
+#endif
 	return 0;
 }
 
@@ -216,5 +224,15 @@ ft_board_setup(void *blob, bd_t *bd)
 	if (rc)
 		printf("Unable to update property NOR mapping, err=%s\n",
 		       fdt_strerror(rc));
+
+#if defined (CFG_FPGA_BASE)
+	memset(val, 0, sizeof(val));
+	val[0] = CFG_FPGA_BASE;
+	rc = fdt_find_and_setprop(blob, "/localbus/fpga", "virtual-reg",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property \"fpga\", err=%s\n",
+		       fdt_strerror(rc));
+#endif
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/socrates/tlb.c b/board/socrates/tlb.c
index b80caea5e0..aea99ada20 100644
--- a/board/socrates/tlb.c
+++ b/board/socrates/tlb.c
@@ -46,16 +46,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 
 	/*
-	 * TLB 0, 1:	128M	Non-cacheable, guarded
-	 * 0xf8000000	128M	FLASH
+	 * TLB 0:	64M	Non-cacheable, guarded
+	 * 0xfc000000	64M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
 	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_64M, 1),
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_64M, 1),
 
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
@@ -73,21 +70,15 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
+#if defined(CFG_FPGA_BASE)
 	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 5:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
+	 * TLB 4:	1M	Non-cacheable, guarded
+	 * 0xc0000000	1M	FPGA and NAND
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CFG_FPGA_BASE, CFG_FPGA_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
+		      0, 4, BOOKE_PAGESZ_1M, 1),
+#endif
 
 	/*
 	 * TLB 6:	64M	Non-cacheable, guarded
diff --git a/board/socrates/upm_table.h b/board/socrates/upm_table.h
new file mode 100644
index 0000000000..f26d8a7b34
--- /dev/null
+++ b/board/socrates/upm_table.h
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2008
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __UPM_TABLE_H
+#define __UPM_TABLE_H
+
+/* UPM Table Configuration Code for FPGA access */
+static const unsigned int UPMTableA[] =
+{
+	0x00fcfc00,  0x00fcfc00,  0x00fcfc00,  0x00fcfc00, //Words 0 to 3
+	0x00fcfc00,  0x00fcfc00,  0x00fcfc00,  0x00fcfc05, //Words 4 to 7
+	0x00fcfc00,  0x00fcfc00,  0x00fcfc04,  0x00fcfc04, //Words 8 to 11
+	0x00fcfc04,  0x00fcfc04,  0x00fcfc04,  0x00fcfc04, //Words 12 to 15
+	0x00fcfc04,  0x00fcfc04,  0x00fcfc00,  0xfffffc00, //Words 16 to 19
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, //Words 20 to 23
+	0x0ffffc00,  0x0ffffc00,  0x0ffffc00,  0x00f3fc04, //Words 24 to 27
+	0x0ffffc00,  0xfffffc01,  0xfffffc00,  0xfffffc01, //Words 28 to 31
+	0x0ffffc00,  0x00f3fc04,  0x00f3fc04,  0x00f3fc04, //Words 32 to 35
+	0x00f3fc04,  0x00f3fc04,  0x00f3fc04,  0x00f3fc04, //Words 36 to 39
+	0x00f3fc04,  0x0ffffc00,  0xfffffc00,  0xfffffc00, //Words 40 to 43
+	0xfffffc01,  0xfffffc00,  0xfffffc00,  0xfffffc01, //Words 44 to 47
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 48 to 51
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 52 to 55
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, //Words 56 to 59
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01  //Words 60 to 63
+};
+
+#endif
diff --git a/board/stxgp3/law.c b/board/stxgp3/law.c
index 312b3c5571..a7e9ceb033 100644
--- a/board/stxgp3/law.c
+++ b/board/stxgp3/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/stxssa/law.c b/board/stxssa/law.c
index 2b25292988..8730cdfc4e 100644
--- a/board/stxssa/law.c
+++ b/board/stxssa/law.c
@@ -47,14 +47,14 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	/* Map the whole localbus, including flash and reset latch. */
-	SET_LAW_ENTRY(6, CFG_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/tqm5200/Makefile b/board/tqc/tqm5200/Makefile
index a5ce7bd46f..a5ce7bd46f 100644
--- a/board/tqm5200/Makefile
+++ b/board/tqc/tqm5200/Makefile
diff --git a/board/tqm5200/cam5200_flash.c b/board/tqc/tqm5200/cam5200_flash.c
index b3f095d807..b3f095d807 100644
--- a/board/tqm5200/cam5200_flash.c
+++ b/board/tqc/tqm5200/cam5200_flash.c
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 7472ca9e97..7472ca9e97 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c
index 214dca65e5..214dca65e5 100644
--- a/board/tqm5200/cmd_tb5200.c
+++ b/board/tqc/tqm5200/cmd_tb5200.c
diff --git a/board/tqm5200/config.mk b/board/tqc/tqm5200/config.mk
index d72dfe7481..d72dfe7481 100644
--- a/board/tqm5200/config.mk
+++ b/board/tqc/tqm5200/config.mk
diff --git a/board/tqm5200/mt48lc16m16a2-75.h b/board/tqc/tqm5200/mt48lc16m16a2-75.h
index 3f1e1691bb..3f1e1691bb 100644
--- a/board/tqm5200/mt48lc16m16a2-75.h
+++ b/board/tqc/tqm5200/mt48lc16m16a2-75.h
diff --git a/board/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index f9891dbb74..f9891dbb74 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
diff --git a/board/tqm8260/Makefile b/board/tqc/tqm8260/Makefile
index 61221fdca2..61221fdca2 100644
--- a/board/tqm8260/Makefile
+++ b/board/tqc/tqm8260/Makefile
diff --git a/board/tqm8260/config.mk b/board/tqc/tqm8260/config.mk
index 1fe99524c6..1fe99524c6 100644
--- a/board/tqm8260/config.mk
+++ b/board/tqc/tqm8260/config.mk
diff --git a/board/tqm8260/flash.c b/board/tqc/tqm8260/flash.c
index 056fe810b3..056fe810b3 100644
--- a/board/tqm8260/flash.c
+++ b/board/tqc/tqm8260/flash.c
diff --git a/board/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
index 736c410ede..736c410ede 100644
--- a/board/tqm8260/tqm8260.c
+++ b/board/tqc/tqm8260/tqm8260.c
diff --git a/board/tqm8272/Makefile b/board/tqc/tqm8272/Makefile
index 6730263512..6730263512 100644
--- a/board/tqm8272/Makefile
+++ b/board/tqc/tqm8272/Makefile
diff --git a/board/tqm8272/config.mk b/board/tqc/tqm8272/config.mk
index af7a81e335..af7a81e335 100644
--- a/board/tqm8272/config.mk
+++ b/board/tqc/tqm8272/config.mk
diff --git a/board/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index 7bd64012c4..7bd64012c4 100644
--- a/board/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
diff --git a/board/tqm834x/Makefile b/board/tqc/tqm834x/Makefile
index 4c0d20417e..4c0d20417e 100644
--- a/board/tqm834x/Makefile
+++ b/board/tqc/tqm834x/Makefile
diff --git a/board/tqm834x/config.mk b/board/tqc/tqm834x/config.mk
index f172c4ede0..f172c4ede0 100644
--- a/board/tqm834x/config.mk
+++ b/board/tqc/tqm834x/config.mk
diff --git a/board/tqm834x/pci.c b/board/tqc/tqm834x/pci.c
index e3d0309d90..e3d0309d90 100644
--- a/board/tqm834x/pci.c
+++ b/board/tqc/tqm834x/pci.c
diff --git a/board/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
index aea985ccc6..aea985ccc6 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqc/tqm834x/tqm834x.c
diff --git a/board/tqm85xx/Makefile b/board/tqc/tqm85xx/Makefile
index 52f5ef9454..8ea07f2468 100644
--- a/board/tqm85xx/Makefile
+++ b/board/tqc/tqm85xx/Makefile
@@ -25,8 +25,14 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o sdram.o law.o tlb.o
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= sdram.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
 
+COBJS-$(CONFIG_NAND) += nand.o
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/tqm85xx/config.mk b/board/tqc/tqm85xx/config.mk
index 52e84ad772..52e84ad772 100644
--- a/board/tqm85xx/config.mk
+++ b/board/tqc/tqm85xx/config.mk
diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c
new file mode 100644
index 0000000000..de3ea00e38
--- /dev/null
+++ b/board/tqc/tqm85xx/law.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * Standard mapping:
+ *
+ * 0x0000_0000	   0x7fff_ffff	   DDR			   2G
+ * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
+ * 0xc000_0000	   0xdfff_ffff	   RapidIO or PCI express  512M
+ * 0xe000_0000	   0xe000_ffff	   CCSR			   1M
+ * 0xe200_0000	   0xe2ff_ffff	   PCI1 IO		   16M
+ * 0xe300_0000	   0xe3ff_ffff	   CAN and NAND Flash	   16M
+ * 0xef00_0000	   0xefff_ffff     PCI express IO          16M
+ * 0xfc00_0000	   0xffff_ffff	   FLASH (boot bank)	   128M
+ *
+ * Big FLASH mapping:
+ *
+ * 0x0000_0000	   0x7fff_ffff	   DDR			   2G
+ * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
+ * 0xa000_0000	   0xa000_ffff	   CCSR			   1M
+ * 0xa200_0000	   0xa2ff_ffff	   PCI1 IO		   16M
+ * 0xa300_0000	   0xa3ff_ffff	   CAN and NAND Flash	   16M
+ * 0xaf00_0000	   0xafff_ffff     PCI express IO          16M
+ * 0xb000_0000	   0xbfff_ffff	   RapidIO or PCI express  256M
+ * 0xc000_0000	   0xffff_ffff	   FLASH (boot bank)	   1G
+ *
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+#ifdef CONFIG_TQM_BIGFLASH
+#define LAW_3_SIZE LAW_SIZE_1G
+#define LAW_5_SIZE LAW_SIZE_256M
+#else
+#define LAW_3_SIZE LAW_SIZE_128M
+#define LAW_5_SIZE LAW_SIZE_512M
+#endif
+
+struct law_entry law_table[] = {
+	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CFG_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC),
+	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+#ifdef CONFIG_PCIE1
+	SET_LAW(CFG_PCIE1_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_PCIE_1),
+#else /* !CONFIG_PCIE1 */
+	SET_LAW(CFG_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO),
+#endif /* CONFIG_PCIE1 */
+#if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND)
+	SET_LAW(CFG_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
+#endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */
+#ifdef CONFIG_PCIE1
+	SET_LAW(CFG_PCIE1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1),
+#endif /* CONFIG_PCIE */
+};
+
+int num_law_entries = ARRAY_SIZE (law_table);
diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c
new file mode 100644
index 0000000000..fe3b31f047
--- /dev/null
+++ b/board/tqc/tqm85xx/nand.c
@@ -0,0 +1,469 @@
+/*
+ * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * (C) Copyright 2006
+ * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/fsl_upm.h>
+#include <ioports.h>
+
+#include <nand.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern uint get_lbc_clock (void);
+
+/* index of UPM RAM array run pattern for NAND command cycle */
+#define	CFG_NAN_UPM_WRITE_CMD_OFS	0x08
+
+/* index of UPM RAM array run pattern for NAND address cycle */
+#define	CFG_NAND_UPM_WRITE_ADDR_OFS	0x10
+
+/* Structure for table with supported UPM timings */
+struct upm_freq {
+	ulong freq;
+	const u32 *upm_patt;
+	uchar gpl4_disable;
+	uchar ehtr;
+	uchar ead;
+};
+
+/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
+
+/* UPM pattern for bus clock = 25 MHz */
+static const u32 upm_patt_25[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
+	/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 33.3 MHz */
+static const u32 upm_patt_33[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
+	/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 41.7 MHz */
+static const u32 upm_patt_42[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
+	/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 50 MHz */
+static const u32 upm_patt_50[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
+	/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 66.7 MHz */
+static const u32 upm_patt_67[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
+	/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 83.3 MHz */
+static const u32 upm_patt_83[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
+	/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 100 MHz */
+static const u32 upm_patt_100[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
+	/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 133.3 MHz */
+static const u32 upm_patt_133[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
+	/* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 166.7 MHz */
+static const u32 upm_patt_167[] = {
+	/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+	/* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
+	/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write CMD */
+	/* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
+	/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
+	/* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
+	/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Single RAM array entry -> NAND Write Data */
+	/* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
+	/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+	/* UPM Write Burst RAM array entry -> unused */
+	/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Refresh Timer RAM array entry -> unused */
+	/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+	/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+	/* UPM Exception RAM array entry -> unsused */
+	/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* Supported UPM timings */
+struct upm_freq upm_freq_table[] = {
+	/* nominal freq. | ptr to table | GPL4 dis. | EHTR  | EAD */
+	{25000000, upm_patt_25, 1, 0, 0},
+	{33333333, upm_patt_33, 1, 0, 0},
+	{41666666, upm_patt_42, 1, 0, 0},
+	{50000000, upm_patt_50, 0, 0, 0},
+	{66666666, upm_patt_67, 0, 0, 0},
+	{83333333, upm_patt_83, 0, 0, 0},
+	{100000000, upm_patt_100, 0, 1, 1},
+	{133333333, upm_patt_133, 0, 1, 1},
+	{166666666, upm_patt_167, 0, 1, 1},
+};
+
+#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
+
+volatile const u32 *nand_upm_patt;
+
+/*
+ * write into UPMB ram
+ */
+static void upmb_write (u_char addr, ulong val)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+	out_be32 (&lbc->mdr, val);
+
+	clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
+			MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
+
+	/* dummy access to perform write */
+	out_8 ((void __iomem *)CFG_NAND0_BASE, 0);
+
+	clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
+}
+
+/*
+ * Initialize UPM for NAND flash access.
+ */
+static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
+{
+	uint i;
+	uint or3 = CFG_OR3_PRELIM;
+	uint clock = get_lbc_clock ();
+
+	out_be32 (&lbc->br3, 0);	/* disable bank and reset all bits */
+	out_be32 (&lbc->br3, CFG_BR3_PRELIM);
+
+	/*
+	 * Search appropriate UPM table for bus clock.
+	 * If the bus clock exceeds a tolerated value, take the UPM timing for
+	 * the next higher supported frequency to ensure that access works
+	 * (even the access may be slower then).
+	 */
+	for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
+		;
+
+	if (i >= UPM_FREQS)
+	/* no valid entry found */
+		/* take last entry with configuration for max. bus clock */
+		i--;
+
+	if (upm_freq_table[i].ehtr) {
+		/* EHTR must be set due to TQM8548 timing specification */
+		or3 |= OR_UPM_EHTR;
+	}
+	if (upm_freq_table[i].ead)
+		/* EAD must be set due to TQM8548 timing specification */
+		or3 |= OR_UPM_EAD;
+
+	out_be32 (&lbc->or3, or3);
+
+	/* Assign address of table */
+	nand_upm_patt = upm_freq_table[i].upm_patt;
+
+	for (i = 0; i < 64; i++) {
+		upmb_write (i, *nand_upm_patt);
+		nand_upm_patt++;
+	}
+
+	/* Put UPM back to normal operation mode */
+	if (upm_freq_table[i].gpl4_disable)
+		/* GPL4 must be disabled according to timing specification */
+		out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
+
+	return;
+}
+
+static struct fsl_upm_nand fun = {
+	.width = 8,
+	.upm_cmd_offset = 0x08,
+	.upm_addr_offset = 0x10,
+	.chip_delay = NAND_BIG_DELAY_US,
+};
+
+void board_nand_select_device (struct nand_chip *nand, int chip)
+{
+}
+
+int board_nand_init (struct nand_chip *nand)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+	if (!nand_upm_patt)
+		nand_upm_setup (lbc);
+
+	fun.upm.io_addr = nand->IO_ADDR_R;
+	fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
+	fun.upm.mdr = (void __iomem *)&lbc->mdr;
+	fun.upm.mar = (void __iomem *)&lbc->mar;
+
+	return fsl_upm_nand_init (nand, &fun);
+}
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c
new file mode 100644
index 0000000000..442ff667c0
--- /dev/null
+++ b/board/tqc/tqm85xx/sdram.c
@@ -0,0 +1,371 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+
+struct sdram_conf_s {
+	unsigned long size;
+	unsigned long reg;
+#ifdef CONFIG_TQM8548
+	unsigned long refresh;
+#endif /* CONFIG_TQM8548 */
+};
+
+typedef struct sdram_conf_s sdram_conf_t;
+
+#ifdef CONFIG_TQM8548
+sdram_conf_t ddr_cs_conf[] = {
+	{(512 << 20), 0x80044102, 0x0001A000},	/* 512MB, 13x10(4)	*/
+	{(256 << 20), 0x80040102, 0x00014000},	/* 256MB, 13x10(4)	*/
+	{(128 << 20), 0x80040101, 0x0000C000},	/* 128MB, 13x9(4)	*/
+};
+#else /* !CONFIG_TQM8548 */
+sdram_conf_t ddr_cs_conf[] = {
+	{(512 << 20), 0x80000202},	/* 512MB, 14x10(4)	*/
+	{(256 << 20), 0x80000102},	/* 256MB, 13x10(4)	*/
+	{(128 << 20), 0x80000101},	/* 128MB, 13x9(4)	*/
+	{( 64 << 20), 0x80000001},	/*  64MB, 12x9(4)	*/
+};
+#endif /* CONFIG_TQM8548 */
+
+#define	N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
+
+int cas_latency (void);
+
+/*
+ * Autodetect onboard DDR SDRAM on 85xx platforms
+ *
+ * NOTE: Some of the hardcoded values are hardware dependant,
+ *       so this should be extended for other future boards
+ *       using this routine!
+ */
+long int sdram_setup (int casl)
+{
+	int i;
+	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+#ifdef CONFIG_TQM8548
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#else /* !CONFIG_TQM8548 */
+	unsigned long cfg_ddr_timing1;
+	unsigned long cfg_ddr_mode;
+#endif /* CONFIG_TQM8548 */
+
+	/*
+	 * Disable memory controller.
+	 */
+	ddr->cs0_config = 0;
+	ddr->sdram_cfg = 0;
+
+#ifdef CONFIG_TQM8548
+	ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
+	ddr->cs0_config = ddr_cs_conf[0].reg;
+	ddr->timing_cfg_3 = 0x00010000;
+
+	/* TIMING CFG 1, 533MHz
+	 * PRETOACT: 4 Clocks
+	 * ACTTOPRE: 12 Clocks
+	 * ACTTORW:  4 Clocks
+	 * CASLAT:   4 Clocks
+	 * REFREC:   34 Clocks
+	 * WRREC:    4 Clocks
+	 * ACTTOACT: 3 Clocks
+	 * WRTORD:   2 Clocks
+	 */
+	ddr->timing_cfg_1 = 0x4C47A432;
+
+	/* TIMING CFG 2, 533MHz
+	 * ADD_LAT:       3 Clocks
+	 * CPO:           READLAT + 1
+	 * WR_LAT:        3 Clocks
+	 * RD_TO_PRE:     2 Clocks
+	 * WR_DATA_DELAY: 1/2 Clock
+	 * CKE_PLS:       1 Clock
+	 * FOUR_ACT:      13 Clocks
+	 */
+	ddr->timing_cfg_2 = 0x3318484D;
+
+	/* DDR SDRAM Mode, 533MHz
+	 * MRS:          Extended Mode Register
+	 * OUT:          Outputs enabled
+	 * RDQS:         no
+	 * DQS:          enabled
+	 * OCD:          default state
+	 * RTT:          75 Ohms
+	 * Posted CAS:   3 Clocks
+	 * ODS:          reduced strength
+	 * DLL:          enabled
+	 * MR:           Mode Register
+	 * PD:           fast exit
+	 * WR:           4 Clocks
+	 * DLL:          no DLL reset
+	 * TM:           normal
+	 * CAS latency:  4 Clocks
+	 * BT:           sequential
+	 * Burst length: 4
+	 */
+	ddr->sdram_mode = 0x439E0642;
+
+	/* DDR SDRAM Interval, 533MHz
+	 * REFINT:  1040 Clocks
+	 * BSTOPRE: 256
+	 */
+	ddr->sdram_interval = (1040 << 16) | 0x100;
+
+	/*
+	 * workaround for erratum DD10 of MPC8458 family below rev. 2.0:
+	 * DDR IO receiver must be set to an acceptable bias point by modifying
+	 * a hidden register.
+	 */
+	if (SVR_REV (get_svr ()) < 0x20) {
+		gur->ddrioovcr = 0x90000000;	/* enable, VSEL 1.8V */
+	}
+
+	/* DDR SDRAM CFG 2
+	 * FRC_SR:      normal mode
+	 * SR_IE:       no self-refresh interrupt
+	 * DLL_RST_DIS: don't care, leave at reset value
+	 * DQS_CFG:     differential DQS signals
+	 * ODT_CFG:     assert ODT to internal IOs only during reads to DRAM
+	 * LVWx_CFG:    don't care, leave at reset value
+	 * NUM_PR:      1 refresh will be issued at a time
+	 * DM_CFG:      don't care, leave at reset value
+	 * D_INIT:      no data initialization
+	 */
+	ddr->sdram_cfg_2 = 0x04401000;
+
+	/* DDR SDRAM MODE 2
+	 * MRS: Extended Mode Register 2
+	 */
+	ddr->sdram_mode_2 = 0x8000C000;
+
+	/* DDR SDRAM CLK CNTL
+	 * CLK_ADJUST: 1/2 Clock 0x02000000
+	 * CLK_ADJUST: 5/8 Clock 0x02800000
+	 */
+	ddr->sdram_clk_cntl = 0x02800000;
+
+	/* wait for clock stabilization */
+	asm ("sync;isync;msync");
+	udelay(1000);
+
+	/* DDR SDRAM CLK CNTL
+	 * MEM_EN:       enabled
+	 * SREN:         don't care, leave at reset value
+	 * ECC_EN:       no error report
+	 * RD_EN:        no register DIMMs
+	 * SDRAM_TYPE:   DDR2
+	 * DYN_PWR:      no power management
+	 * 32_BE:        don't care, leave at reset value
+	 * 8_BE:         4 beat burst
+	 * NCAP:         don't care, leave at reset value
+	 * 2T_EN:        1T Timing
+	 * BA_INTLV_CTL: no interleaving
+	 * x32_EN:       x16 organization
+	 * PCHB8:        MA[10] for auto-precharge
+	 * HSE:          half strength for single and 2-layer stacks
+	 * (full strength for 3- and 4-layer stacks no yet considered)
+	 * MEM_HALT:     no halt
+	 * BI:           automatic initialization
+	 */
+	ddr->sdram_cfg = 0x83000008;
+	asm ("sync; isync; msync");
+	udelay(1000);
+
+#else /* !CONFIG_TQM8548 */
+	switch (casl) {
+	case 20:
+		cfg_ddr_timing1 = 0x47405331 | (3 << 16);
+		cfg_ddr_mode = 0x40020002 | (2 << 4);
+		break;
+
+	case 25:
+		cfg_ddr_timing1 = 0x47405331 | (4 << 16);
+		cfg_ddr_mode = 0x40020002 | (6 << 4);
+		break;
+
+	case 30:
+	default:
+		cfg_ddr_timing1 = 0x47405331 | (5 << 16);
+		cfg_ddr_mode = 0x40020002 | (3 << 4);
+		break;
+	}
+
+	ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
+	ddr->cs0_config = ddr_cs_conf[0].reg;
+	ddr->timing_cfg_1 = cfg_ddr_timing1;
+	ddr->timing_cfg_2 = 0x00000800;		/* P9-45,may need tuning */
+	ddr->sdram_mode = cfg_ddr_mode;
+	ddr->sdram_interval = 0x05160100;	/* autocharge,no open page */
+	ddr->err_disable = 0x0000000D;
+
+	asm ("sync; isync; msync");
+	udelay (1000);
+
+	ddr->sdram_cfg = 0xc2000000;		/* unbuffered,no DYN_PWR */
+	asm ("sync; isync; msync");
+	udelay (1000);
+#endif /* CONFIG_TQM8548 */
+
+	for (i = 0; i < N_DDR_CS_CONF; i++) {
+		ddr->cs0_config = ddr_cs_conf[i].reg;
+
+		if (get_ram_size (0, ddr_cs_conf[i].size) ==
+		    ddr_cs_conf[i].size) {
+			/*
+			 * size detected -> set Chip Select Bounds Register
+			 */
+			ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24;
+
+			break;
+		}
+	}
+
+#ifdef CONFIG_TQM8548
+	if (i < N_DDR_CS_CONF) {
+		/* Adjust refresh rate for DDR2 */
+
+		ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000;
+
+		ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) |
+		    (ddr_cs_conf[i].refresh & 0x0000F000);
+
+		return ddr_cs_conf[i].size;
+	}
+#endif /* CONFIG_TQM8548 */
+
+	/* return size if detected, else return 0 */
+	return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
+}
+
+void board_add_ram_info (int use_default)
+{
+	int casl;
+
+	if (use_default)
+		casl = CONFIG_DDR_DEFAULT_CL;
+	else
+		casl = cas_latency ();
+
+	puts (" (CL=");
+	switch (casl) {
+	case 20:
+		puts ("2)");
+		break;
+
+	case 25:
+		puts ("2.5)");
+		break;
+
+	case 30:
+		puts ("3)");
+		break;
+	}
+}
+
+long int initdram (int board_type)
+{
+	long dram_size = 0;
+	int casl;
+
+#if defined(CONFIG_DDR_DLL)
+	/*
+	 * This DLL-Override only used on TQM8540 and TQM8560
+	 */
+	{
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		int i, x;
+
+		x = 10;
+
+		/*
+		 * Work around to stabilize DDR DLL
+		 */
+		gur->ddrdllcr = 0x81000000;
+		asm ("sync; isync; msync");
+		udelay (200);
+		while (gur->ddrdllcr != 0x81000100) {
+			gur->devdisr = gur->devdisr | 0x00010000;
+			asm ("sync; isync; msync");
+			for (i = 0; i < x; i++)
+				;
+			gur->devdisr = gur->devdisr & 0xfff7ffff;
+			asm ("sync; isync; msync");
+			x++;
+		}
+	}
+#endif
+
+	casl = cas_latency ();
+	dram_size = sdram_setup (casl);
+	if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
+		/*
+		 * Try again with default CAS latency
+		 */
+		puts ("Problem with CAS lantency");
+		board_add_ram_info (1);
+		puts (", using default CL!\n");
+		casl = CONFIG_DDR_DEFAULT_CL;
+		dram_size = sdram_setup (casl);
+		puts ("       ");
+	}
+
+	return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf ("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf ("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf ("SDRAM test passed.\n");
+	return 0;
+}
+#endif
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
new file mode 100644
index 0000000000..380448a4f5
--- /dev/null
+++ b/board/tqc/tqm85xx/tlb.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		       0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 4 * 1024,
+		       CFG_INIT_RAM_ADDR + 4 * 1024,
+		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		       0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 8 * 1024,
+		       CFG_INIT_RAM_ADDR + 8 * 1024,
+		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		       0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 12 * 1024,
+		       CFG_INIT_RAM_ADDR + 12 * 1024,
+		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		       0, 0, BOOKE_PAGESZ_4K, 0),
+
+#ifndef CONFIG_TQM_BIGFLASH
+	/*
+	 * TLB 0, 1:	128M	Non-cacheable, guarded
+	 * 0xf8000000	128M	FLASH
+	 * Out of reset this entry is only 4K.
+	 */
+	SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 1, BOOKE_PAGESZ_64M, 1),
+	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x4000000,
+		       CFG_FLASH_BASE + 0x4000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 0, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLB 2:	256M	Non-cacheable, guarded
+	 * 0x80000000	256M	PCI1 MEM First half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLB 3:	256M	Non-cacheable, guarded
+	 * 0x90000000	256M	PCI1 MEM Second half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000,
+		       CFG_PCI1_MEM_PHYS + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 3, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+	/*
+	 * TLB 4:	256M	Non-cacheable, guarded
+	 * 0xc0000000	256M	PCI express MEM First half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLB 5:	256M	Non-cacheable, guarded
+	 * 0xd0000000	256M	PCI express MEM Second half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE + 0x10000000,
+		       CFG_PCIE1_MEM_BASE + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 5, BOOKE_PAGESZ_256M, 1),
+#else /* !CONFIG_PCIE */
+	/*
+	 * TLB 4:	256M	Non-cacheable, guarded
+	 * 0xc0000000	256M	Rapid IO MEM First half
+	 */
+	SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLB 5:	256M	Non-cacheable, guarded
+	 * 0xd0000000	256M	Rapid IO MEM Second half
+	 */
+	SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE + 0x10000000,
+		       CFG_RIO_MEM_BASE + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 5, BOOKE_PAGESZ_256M, 1),
+#endif /* CONFIG_PCIE */
+
+	/*
+	 * TLB 6:	 64M	Non-cacheable, guarded
+	 * 0xe0000000	  1M	CCSRBAR
+	 * 0xe2000000	 16M	PCI1 IO
+	 * 0xe3000000	 16M	CAN and NAND Flash
+	 */
+	SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 6, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLB 7+8:	512M	 DDR, cache disabled (needed for memory test)
+	 * 0x00000000	512M	 DDR System memory
+	 * Without SPD EEPROM configured DDR, this must be setup manually.
+	 * Make sure the TLB count at the top of this table is correct.
+	 * Likely it needs to be increased by two for these entries.
+	 */
+	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 7, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000,
+		       CFG_DDR_SDRAM_BASE + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 8, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+	/*
+	 * TLB 9:	 16M	Non-cacheable, guarded
+	 * 0xef000000	 16M	PCI express IO
+	 */
+	SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 9, BOOKE_PAGESZ_16M, 1),
+#endif /* CONFIG_PCIE */
+
+#else /* CONFIG_TQM_BIGFLASH */
+
+	/*
+	 * TLB 0,1,2,3:	  1G	Non-cacheable, guarded
+	 * 0xc0000000	  1G	FLASH
+	 * Out of reset this entry is only 4K.
+	 */
+	SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 3, BOOKE_PAGESZ_256M, 1),
+	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x10000000,
+		       CFG_FLASH_BASE + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 2, BOOKE_PAGESZ_256M, 1),
+	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x20000000,
+		       CFG_FLASH_BASE + 0x20000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 1, BOOKE_PAGESZ_256M, 1),
+	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x30000000,
+		       CFG_FLASH_BASE + 0x30000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 0, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLB 4:	256M	Non-cacheable, guarded
+	 * 0x80000000	256M	PCI1 MEM First half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLB 5:	256M	Non-cacheable, guarded
+	 * 0x90000000	256M	PCI1 MEM Second half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000,
+		       CFG_PCI1_MEM_PHYS + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 5, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+	/*
+	 * TLB 6:	256M	Non-cacheable, guarded
+	 * 0xc0000000	256M	PCI express MEM First half
+	 */
+	SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 6, BOOKE_PAGESZ_256M, 1),
+#else /* !CONFIG_PCIE */
+	/*
+	 * TLB 6:	256M	Non-cacheable, guarded
+	 * 0xb0000000	256M	Rapid IO MEM First half
+	 */
+	SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 6, BOOKE_PAGESZ_256M, 1),
+
+#endif /* CONFIG_PCIE */
+
+	/*
+	 * TLB 7:	 64M	Non-cacheable, guarded
+	 * 0xa0000000	  1M	CCSRBAR
+	 * 0xa2000000	 16M	PCI1 IO
+	 * 0xa3000000	 16M	CAN and NAND Flash
+	 */
+	SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 7, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLB 8+9:	512M	 DDR, cache disabled (needed for memory test)
+	 * 0x00000000	512M	 DDR System memory
+	 * Without SPD EEPROM configured DDR, this must be setup manually.
+	 * Make sure the TLB count at the top of this table is correct.
+	 * Likely it needs to be increased by two for these entries.
+	 */
+	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 8, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000,
+		       CFG_DDR_SDRAM_BASE + 0x10000000,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 9, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+	/*
+	 * TLB 10:	 16M	Non-cacheable, guarded
+	 * 0xaf000000	 16M	PCI express IO
+	 */
+	SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		       0, 10, BOOKE_PAGESZ_16M, 1),
+#endif /* CONFIG_PCIE */
+
+#endif /* CONFIG_TQM_BIGFLASH */
+};
+
+int num_tlb_entries = ARRAY_SIZE (tlb_table);
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
new file mode 100644
index 0000000000..f1c2e58edd
--- /dev/null
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -0,0 +1,744 @@
+/*
+ * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * (C) Copyright 2006
+ * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2002,2003, Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <ioports.h>
+#include <flash.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[];	/* FLASH chips info */
+
+void local_bus_init (void);
+ulong flash_get_size (ulong base, int banknum);
+
+#ifdef CONFIG_PS2MULT
+void ps2mult_early_init (void);
+#endif
+
+#ifdef CONFIG_CPM2
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+	/* Port A: conf, ppar, psor, pdir, podr, pdat */
+	{
+	 {1, 1, 1, 0, 0, 0},	/* PA31: FCC1 MII COL */
+	 {1, 1, 1, 0, 0, 0},	/* PA30: FCC1 MII CRS */
+	 {1, 1, 1, 1, 0, 0},	/* PA29: FCC1 MII TX_ER */
+	 {1, 1, 1, 1, 0, 0},	/* PA28: FCC1 MII TX_EN */
+	 {1, 1, 1, 0, 0, 0},	/* PA27: FCC1 MII RX_DV */
+	 {1, 1, 1, 0, 0, 0},	/* PA26: FCC1 MII RX_ER */
+	 {0, 1, 0, 1, 0, 0},	/* PA25: FCC1 ATMTXD[0] */
+	 {0, 1, 0, 1, 0, 0},	/* PA24: FCC1 ATMTXD[1] */
+	 {0, 1, 0, 1, 0, 0},	/* PA23: FCC1 ATMTXD[2] */
+	 {0, 1, 0, 1, 0, 0},	/* PA22: FCC1 ATMTXD[3] */
+	 {1, 1, 0, 1, 0, 0},	/* PA21: FCC1 MII TxD[3] */
+	 {1, 1, 0, 1, 0, 0},	/* PA20: FCC1 MII TxD[2] */
+	 {1, 1, 0, 1, 0, 0},	/* PA19: FCC1 MII TxD[1] */
+	 {1, 1, 0, 1, 0, 0},	/* PA18: FCC1 MII TxD[0] */
+	 {1, 1, 0, 0, 0, 0},	/* PA17: FCC1 MII RxD[0] */
+	 {1, 1, 0, 0, 0, 0},	/* PA16: FCC1 MII RxD[1] */
+	 {1, 1, 0, 0, 0, 0},	/* PA15: FCC1 MII RxD[2] */
+	 {1, 1, 0, 0, 0, 0},	/* PA14: FCC1 MII RxD[3] */
+	 {0, 1, 0, 0, 0, 0},	/* PA13: FCC1 ATMRXD[3] */
+	 {0, 1, 0, 0, 0, 0},	/* PA12: FCC1 ATMRXD[2] */
+	 {0, 1, 0, 0, 0, 0},	/* PA11: FCC1 ATMRXD[1] */
+	 {0, 1, 0, 0, 0, 0},	/* PA10: FCC1 ATMRXD[0] */
+	 {0, 1, 1, 1, 0, 0},	/* PA9 : FCC1 L1TXD */
+	 {0, 1, 1, 0, 0, 0},	/* PA8 : FCC1 L1RXD */
+	 {0, 0, 0, 1, 0, 0},	/* PA7 : PA7 */
+	 {0, 1, 1, 1, 0, 0},	/* PA6 : TDM A1 L1RSYNC */
+	 {0, 0, 0, 1, 0, 0},	/* PA5 : PA5 */
+	 {0, 0, 0, 1, 0, 0},	/* PA4 : PA4 */
+	 {0, 0, 0, 1, 0, 0},	/* PA3 : PA3 */
+	 {0, 0, 0, 1, 0, 0},	/* PA2 : PA2 */
+	 {0, 0, 0, 0, 0, 0},	/* PA1 : FREERUN */
+	 {0, 0, 0, 1, 0, 0}	/* PA0 : PA0 */
+	 },
+
+	/* Port B: conf, ppar, psor, pdir, podr, pdat */
+	{
+	 {1, 1, 0, 1, 0, 0},	/* PB31: FCC2 MII TX_ER */
+	 {1, 1, 0, 0, 0, 0},	/* PB30: FCC2 MII RX_DV */
+	 {1, 1, 1, 1, 0, 0},	/* PB29: FCC2 MII TX_EN */
+	 {1, 1, 0, 0, 0, 0},	/* PB28: FCC2 MII RX_ER */
+	 {1, 1, 0, 0, 0, 0},	/* PB27: FCC2 MII COL */
+	 {1, 1, 0, 0, 0, 0},	/* PB26: FCC2 MII CRS */
+	 {1, 1, 0, 1, 0, 0},	/* PB25: FCC2 MII TxD[3] */
+	 {1, 1, 0, 1, 0, 0},	/* PB24: FCC2 MII TxD[2] */
+	 {1, 1, 0, 1, 0, 0},	/* PB23: FCC2 MII TxD[1] */
+	 {1, 1, 0, 1, 0, 0},	/* PB22: FCC2 MII TxD[0] */
+	 {1, 1, 0, 0, 0, 0},	/* PB21: FCC2 MII RxD[0] */
+	 {1, 1, 0, 0, 0, 0},	/* PB20: FCC2 MII RxD[1] */
+	 {1, 1, 0, 0, 0, 0},	/* PB19: FCC2 MII RxD[2] */
+	 {1, 1, 0, 0, 0, 0},	/* PB18: FCC2 MII RxD[3] */
+	 {1, 1, 0, 0, 0, 0},	/* PB17: FCC3:RX_DIV */
+	 {1, 1, 0, 0, 0, 0},	/* PB16: FCC3:RX_ERR */
+	 {1, 1, 0, 1, 0, 0},	/* PB15: FCC3:TX_ERR */
+	 {1, 1, 0, 1, 0, 0},	/* PB14: FCC3:TX_EN */
+	 {1, 1, 0, 0, 0, 0},	/* PB13: FCC3:COL */
+	 {1, 1, 0, 0, 0, 0},	/* PB12: FCC3:CRS */
+	 {1, 1, 0, 0, 0, 0},	/* PB11: FCC3:RXD */
+	 {1, 1, 0, 0, 0, 0},	/* PB10: FCC3:RXD */
+	 {1, 1, 0, 0, 0, 0},	/* PB9 : FCC3:RXD */
+	 {1, 1, 0, 0, 0, 0},	/* PB8 : FCC3:RXD */
+	 {1, 1, 0, 1, 0, 0},	/* PB7 : FCC3:TXD */
+	 {1, 1, 0, 1, 0, 0},	/* PB6 : FCC3:TXD */
+	 {1, 1, 0, 1, 0, 0},	/* PB5 : FCC3:TXD */
+	 {1, 1, 0, 1, 0, 0},	/* PB4 : FCC3:TXD */
+	 {0, 0, 0, 0, 0, 0},	/* PB3 : pin doesn't exist */
+	 {0, 0, 0, 0, 0, 0},	/* PB2 : pin doesn't exist */
+	 {0, 0, 0, 0, 0, 0},	/* PB1 : pin doesn't exist */
+	 {0, 0, 0, 0, 0, 0}	/* PB0 : pin doesn't exist */
+	 },
+
+	/* Port C: conf, ppar, psor, pdir, podr, pdat */
+	{
+	 {0, 0, 0, 1, 0, 0},	/* PC31: PC31 */
+	 {0, 0, 0, 1, 0, 0},	/* PC30: PC30 */
+	 {0, 1, 1, 0, 0, 0},	/* PC29: SCC1 EN *CLSN */
+	 {0, 0, 0, 1, 0, 0},	/* PC28: PC28 */
+	 {0, 0, 0, 1, 0, 0},	/* PC27: UART Clock in */
+	 {0, 0, 0, 1, 0, 0},	/* PC26: PC26 */
+	 {0, 0, 0, 1, 0, 0},	/* PC25: PC25 */
+	 {0, 0, 0, 1, 0, 0},	/* PC24: PC24 */
+	 {0, 1, 0, 1, 0, 0},	/* PC23: ATMTFCLK */
+	 {0, 1, 0, 0, 0, 0},	/* PC22: ATMRFCLK */
+	 {1, 1, 0, 0, 0, 0},	/* PC21: SCC1 EN RXCLK */
+	 {1, 1, 0, 0, 0, 0},	/* PC20: SCC1 EN TXCLK */
+	 {1, 1, 0, 0, 0, 0},	/* PC19: FCC2 MII RX_CLK CLK13 */
+	 {1, 1, 0, 0, 0, 0},	/* PC18: FCC Tx Clock (CLK14) */
+	 {1, 1, 0, 0, 0, 0},	/* PC17: PC17 */
+	 {1, 1, 0, 0, 0, 0},	/* PC16: FCC Tx Clock (CLK16) */
+	 {0, 1, 0, 0, 0, 0},	/* PC15: PC15 */
+	 {0, 1, 0, 0, 0, 0},	/* PC14: SCC1 EN *CD */
+	 {0, 1, 0, 0, 0, 0},	/* PC13: PC13 */
+	 {0, 1, 0, 1, 0, 0},	/* PC12: PC12 */
+	 {0, 0, 0, 1, 0, 0},	/* PC11: LXT971 transmit control */
+	 {0, 0, 0, 1, 0, 0},	/* PC10: FETHMDC */
+	 {0, 0, 0, 0, 0, 0},	/* PC9 : FETHMDIO */
+	 {0, 0, 0, 1, 0, 0},	/* PC8 : PC8 */
+	 {0, 0, 0, 1, 0, 0},	/* PC7 : PC7 */
+	 {0, 0, 0, 1, 0, 0},	/* PC6 : PC6 */
+	 {0, 0, 0, 1, 0, 0},	/* PC5 : PC5 */
+	 {0, 0, 0, 1, 0, 0},	/* PC4 : PC4 */
+	 {0, 0, 0, 1, 0, 0},	/* PC3 : PC3 */
+	 {0, 0, 0, 1, 0, 1},	/* PC2 : ENET FDE */
+	 {0, 0, 0, 1, 0, 0},	/* PC1 : ENET DSQE */
+	 {0, 0, 0, 1, 0, 0},	/* PC0 : ENET LBK */
+	 },
+
+	/* Port D: conf, ppar, psor, pdir, podr, pdat */
+	{
+#ifdef CONFIG_TQM8560
+	 {1, 1, 0, 0, 0, 0},	/* PD31: SCC1 EN RxD */
+	 {1, 1, 1, 1, 0, 0},	/* PD30: SCC1 EN TxD */
+	 {1, 1, 0, 1, 0, 0},	/* PD29: SCC1 EN TENA */
+#else /* !CONFIG_TQM8560 */
+	 {0, 0, 0, 0, 0, 0},	/* PD31: PD31 */
+	 {0, 0, 0, 0, 0, 0},	/* PD30: PD30 */
+	 {0, 0, 0, 0, 0, 0},	/* PD29: PD29 */
+#endif /* CONFIG_TQM8560 */
+	 {1, 1, 0, 0, 0, 0},	/* PD28: PD28 */
+	 {1, 1, 0, 1, 0, 0},	/* PD27: PD27 */
+	 {1, 1, 0, 1, 0, 0},	/* PD26: PD26 */
+	 {0, 0, 0, 1, 0, 0},	/* PD25: PD25 */
+	 {0, 0, 0, 1, 0, 0},	/* PD24: PD24 */
+	 {0, 0, 0, 1, 0, 0},	/* PD23: PD23 */
+	 {0, 0, 0, 1, 0, 0},	/* PD22: PD22 */
+	 {0, 0, 0, 1, 0, 0},	/* PD21: PD21 */
+	 {0, 0, 0, 1, 0, 0},	/* PD20: PD20 */
+	 {0, 0, 0, 1, 0, 0},	/* PD19: PD19 */
+	 {0, 0, 0, 1, 0, 0},	/* PD18: PD18 */
+	 {0, 1, 0, 0, 0, 0},	/* PD17: FCC1 ATMRXPRTY */
+	 {0, 1, 0, 1, 0, 0},	/* PD16: FCC1 ATMTXPRTY */
+	 {0, 1, 1, 0, 1, 0},	/* PD15: I2C SDA */
+	 {0, 0, 0, 1, 0, 0},	/* PD14: LED */
+	 {0, 0, 0, 0, 0, 0},	/* PD13: PD13 */
+	 {0, 0, 0, 0, 0, 0},	/* PD12: PD12 */
+	 {0, 0, 0, 0, 0, 0},	/* PD11: PD11 */
+	 {0, 0, 0, 0, 0, 0},	/* PD10: PD10 */
+	 {0, 1, 0, 1, 0, 0},	/* PD9 : SMC1 TXD */
+	 {0, 1, 0, 0, 0, 0},	/* PD8 : SMC1 RXD */
+	 {0, 0, 0, 1, 0, 1},	/* PD7 : PD7 */
+	 {0, 0, 0, 1, 0, 1},	/* PD6 : PD6 */
+	 {0, 0, 0, 1, 0, 1},	/* PD5 : PD5 */
+	 {0, 0, 0, 1, 0, 1},	/* PD4 : PD4 */
+	 {0, 0, 0, 0, 0, 0},	/* PD3 : pin doesn't exist */
+	 {0, 0, 0, 0, 0, 0},	/* PD2 : pin doesn't exist */
+	 {0, 0, 0, 0, 0, 0},	/* PD1 : pin doesn't exist */
+	 {0, 0, 0, 0, 0, 0}	/* PD0 : pin doesn't exist */
+	 }
+};
+#endif /*  CONFIG_CPM2 */
+
+#define CASL_STRING1	"casl=xx"
+#define CASL_STRING2	"casl="
+
+static const int casl_table[] = { 20, 25, 30 };
+#define	N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
+
+int cas_latency (void)
+{
+	char *s = getenv ("serial#");
+	int casl;
+	int val;
+	int i;
+
+	casl = CONFIG_DDR_DEFAULT_CL;
+
+	if (s != NULL) {
+		if (strncmp(s + strlen (s) - strlen (CASL_STRING1),
+			    CASL_STRING2, strlen (CASL_STRING2)) == 0) {
+			val = simple_strtoul (s + strlen (s) - 2, NULL, 10);
+
+			for (i = 0; i < N_CASL; ++i) {
+				if (val == casl_table[i]) {
+					return val;
+				}
+			}
+		}
+	}
+
+	return casl;
+}
+
+int checkboard (void)
+{
+	char *s = getenv ("serial#");
+
+	printf ("Board: %s", CONFIG_BOARDNAME);
+	if (s != NULL) {
+		puts (", serial# ");
+		puts (s);
+	}
+	putc ('\n');
+
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	return 0;
+}
+
+int misc_init_r (void)
+{
+	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+	/*
+	 * Adjust flash start and offset to detected values
+	 */
+	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	gd->bd->bi_flashoffset = 0;
+
+	/*
+	 * Recalculate CS configuration if second FLASH bank is available
+	 */
+	if (flash_info[0].size > 0) {
+		memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
+			(CFG_OR1_PRELIM & 0x00007fff);
+		memctl->br1 = gd->bd->bi_flashstart |
+			(CFG_BR1_PRELIM & 0x00007fff);
+		/*
+		 * Re-check to get correct base address for bank 1
+		 */
+		flash_get_size (gd->bd->bi_flashstart, 0);
+	} else {
+		memctl->or1 = 0;
+		memctl->br1 = 0;
+	}
+
+	/*
+	 *  If bank 1 is equipped, bank 0 is mapped after bank 1
+	 */
+	memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
+		(CFG_OR0_PRELIM & 0x00007fff);
+	memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
+		(CFG_BR0_PRELIM & 0x00007fff);
+	/*
+	 * Re-check to get correct base address for bank 0
+	 */
+	flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1);
+
+	/*
+	 * Re-do flash protection upon new addresses
+	 */
+	flash_protect (FLAG_PROTECT_CLEAR,
+		       gd->bd->bi_flashstart, 0xffffffff,
+		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+	/* Monitor protection ON by default */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_MONITOR_BASE,
+		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+	/* Environment protection ON by default */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+	/* Redundant environment protection ON by default */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR_REDUND,
+		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CAN_DRIVER
+/*
+ * Initialize UPMC RAM
+ */
+static void upmc_write (u_char addr, uint val)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+	out_be32 (&lbc->mdr, val);
+
+	clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK,
+			MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
+
+	/* dummy access to perform write */
+	out_8 ((void __iomem *)CFG_CAN_BASE, 0);
+
+	/* normal operation */
+	clrbits_be32(&lbc->mcmr, MxMR_OP_WARR);
+}
+#endif /* CONFIG_CAN_DRIVER */
+
+uint get_lbc_clock (void)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	sys_info_t sys_info;
+	ulong clkdiv = lbc->lcrr & 0x0f;
+
+	get_sys_info (&sys_info);
+
+	if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
+#ifdef CONFIG_MPC8548
+		/*
+		 * Yes, the entire PQ38 family use the same
+		 * bit-representation for twice the clock divider value.
+		 */
+		clkdiv *= 2;
+#endif
+		return sys_info.freqSystemBus / clkdiv;
+	}
+
+	puts("Invalid clock divider value in CFG_LBC_LCRR\n");
+
+	return 0;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void local_bus_init (void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	uint lbc_mhz = get_lbc_clock ()  / 1000000;
+
+#ifdef CONFIG_MPC8548
+	uint svr = get_svr ();
+	uint lcrr;
+
+	/*
+	 * MPC revision < 2.0
+	 * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1:
+	 * Modify engineering use only register at address 0xE_0F20.
+	 * "1. Read register at offset 0xE_0F20
+	 * 2. And value with 0x0000_FFFF
+	 * 3. OR result with 0x0000_0004
+	 * 4. Write result back to offset 0xE_0F20."
+	 *
+	 * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2:
+	 * Modify engineering use only register at address 0xE_0F20.
+	 * "1. Read register at offset 0xE_0F20
+	 * 2. And value with 0xFFFF_FFDF
+	 * 3. Write result back to offset 0xE_0F20."
+	 *
+	 * Since it is the same register, we do the modification in one step.
+	 */
+	if (SVR_MAJ (svr) < 2) {
+		uint dummy = gur->lbiuiplldcr1;
+		dummy &= 0x0000FFDF;
+		dummy |= 0x00000004;
+		gur->lbiuiplldcr1 = dummy;
+	}
+
+	lcrr = CFG_LBC_LCRR;
+
+	/*
+	 * Local Bus Clock > 83.3 MHz. According to timing
+	 * specifications set LCRR[EADC] to 2 delay cycles.
+	 */
+	if (lbc_mhz > 83) {
+		lcrr &= ~LCRR_EADC;
+		lcrr |= LCRR_EADC_2;
+	}
+
+	/*
+	 * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
+	 * disable PLL bypass for Local Bus Clock > 83 MHz.
+	 */
+	if (lbc_mhz >= 66)
+		lcrr &= (~LCRR_DBYP);	/* DLL Enabled */
+
+	else
+		lcrr |= LCRR_DBYP;	/* DLL Bypass */
+
+	lbc->lcrr = lcrr;
+	asm ("sync;isync;msync");
+
+	/*
+	 * According to MPC8548ERMAD Rev.1.3 read back LCRR
+	 * and terminate with isync
+	 */
+	lcrr = lbc->lcrr;
+	asm ("isync;");
+
+	/* let DLL stabilize */
+	udelay (500);
+
+#else /* !CONFIG_MPC8548 */
+
+	/*
+	 * Errata LBC11.
+	 * Fix Local Bus clock glitch when DLL is enabled.
+	 *
+	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
+	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * Between 66 and 133, the DLL is enabled with an override workaround.
+	 */
+
+	if (lbc_mhz < 66) {
+		lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
+		lbc->ltedr = 0xa4c80000;	/* DK: !!! */
+
+	} else if (lbc_mhz >= 133) {
+		lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */
+
+	} else {
+		/*
+		 * On REV1 boards, need to change CLKDIV before enable DLL.
+		 * Default CLKDIV is 8, change it to 4 temporarily.
+		 */
+		uint pvr = get_pvr ();
+		uint temp_lbcdll = 0;
+
+		if (pvr == PVR_85xx_REV1) {
+			/* FIXME: Justify the high bit here. */
+			lbc->lcrr = 0x10000004;
+		}
+
+		lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */
+		udelay (200);
+
+		/*
+		 * Sample LBC DLL ctrl reg, upshift it to set the
+		 * override bits.
+		 */
+		temp_lbcdll = gur->lbcdllcr;
+		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
+		asm ("sync;isync;msync");
+	}
+#endif /* !CONFIG_MPC8548 */
+
+#ifdef	CONFIG_CAN_DRIVER
+	/*
+	 * According to timing specifications EAD must be
+	 * set if Local Bus Clock is > 83 MHz.
+	 */
+	if (lbc_mhz > 83)
+		out_be32 (&lbc->or2, CFG_OR2_CAN | OR_UPM_EAD);
+	else
+		out_be32 (&lbc->or2, CFG_OR2_CAN);
+	out_be32 (&lbc->br2, CFG_BR2_CAN);
+
+	/* LGPL4 is UPWAIT */
+	out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
+
+	/* Initialize UPMC for CAN: single read */
+	upmc_write (0x00, 0xFFFFED00);
+	upmc_write (0x01, 0xCCFFCC00);
+	upmc_write (0x02, 0x00FFCF00);
+	upmc_write (0x03, 0x00FFCF00);
+	upmc_write (0x04, 0x00FFDC00);
+	upmc_write (0x05, 0x00FFCF00);
+	upmc_write (0x06, 0x00FFED00);
+	upmc_write (0x07, 0x3FFFCC07);
+
+	/* Initialize UPMC for CAN: single write */
+	upmc_write (0x18, 0xFFFFED00);
+	upmc_write (0x19, 0xCCFFEC00);
+	upmc_write (0x1A, 0x00FFED80);
+	upmc_write (0x1B, 0x00FFED80);
+	upmc_write (0x1C, 0x00FFFC00);
+	upmc_write (0x1D, 0x0FFFEC00);
+	upmc_write (0x1E, 0x0FFFEF00);
+	upmc_write (0x1F, 0x3FFFEC05);
+#endif /* CONFIG_CAN_DRIVER */
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+static int first_free_busno;
+
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+static struct pci_controller pci1_hose;
+#endif /* CONFIG_PCI || CONFIG_PCI1 */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif /* CONFIG_PCIE1 */
+
+static inline void init_pci1(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+
+	/* PORDEVSR[15] */
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+	/* PORDEVSR[14] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+	/* PORPLLSR[16] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) ||
+		(host_agent == 6);
+
+	uint pci_speed = CONFIG_SYS_CLK_FREQ;	/* PCI PSPEED in [4:5] */
+
+	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("PCI1:  %d bit, %s MHz, %s, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333333) ? "33" :
+			(pci_speed == 66666666) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter");
+
+
+		/* inbound */
+		pci_set_region (hose->regions + 0,
+				CFG_PCI_MEMORY_BUS,
+				CFG_PCI_MEMORY_PHYS,
+				CFG_PCI_MEMORY_SIZE,
+				PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+
+		/* outbound memory */
+		pci_set_region (hose->regions + 1,
+				CFG_PCI1_MEM_BASE,
+				CFG_PCI1_MEM_PHYS,
+				CFG_PCI1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region (hose->regions + 2,
+				CFG_PCI1_IO_BASE,
+				CFG_PCI1_IO_PHYS,
+				CFG_PCI1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect (hose, (int)&pci->cfg_addr,
+				    (int)&pci->cfg_data);
+
+		fsl_pci_init (hose);
+
+		printf ("       PCI on bus %02x..%02x\n",
+			hose->first_busno, hose->last_busno);
+
+		first_free_busno = hose->last_busno + 1;
+#ifdef CONFIG_PCIX_CHECK
+		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+			ushort reg16 =
+				PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
+				PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+			uint dev = PCI_BDF(hose->first_busno, 0, 0);
+
+			/* PCI-X init */
+			if (CONFIG_SYS_CLK_FREQ < 66000000)
+				puts ("PCI-X will only work at 66 MHz\n");
+
+			pci_hose_write_config_word (hose, dev, PCIX_COMMAND,
+						    reg16);
+		}
+#endif
+	} else {
+		puts ("PCI1:  disabled\n");
+	}
+#else /* !(CONFIG_PCI || CONFIG_PCI1) */
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif /* CONFIG_PCI || CONFIG_PCI1) */
+}
+
+static inline void init_pcie1(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_PCIE1
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) ||
+		(host_agent == 3);
+
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("PCIe:  %s, base address %x",
+			pcie_ep ? "End point" : "Root complex", (uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (", with errors. Clearing. Now 0x%08x",
+			       pci->pme_msg_det);
+		}
+		puts ("\n");
+
+		/* inbound */
+		pci_set_region (hose->regions + 0,
+				CFG_PCI_MEMORY_BUS,
+				CFG_PCI_MEMORY_PHYS,
+				CFG_PCI_MEMORY_SIZE,
+				PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region (hose->regions + 1,
+				CFG_PCIE1_MEM_BASE,
+				CFG_PCIE1_MEM_PHYS,
+				CFG_PCIE1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region (hose->regions + 2,
+				CFG_PCIE1_IO_BASE,
+				CFG_PCIE1_IO_PHYS,
+				CFG_PCIE1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				   (int)&pci->cfg_data);
+
+		fsl_pci_init (hose);
+		printf ("       PCIe on bus %02x..%02x\n",
+			hose->first_busno, hose->last_busno);
+
+		first_free_busno = hose->last_busno + 1;
+
+	} else {
+		printf ("PCIe:  disabled\n");
+	}
+#else /* !CONFIG_PCIE1 */
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif /* CONFIG_PCIE1 */
+}
+
+void pci_init_board (void)
+{
+	init_pci1();
+	init_pcie1();
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup (void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	ft_cpu_setup (blob, bd);
+
+	node = fdt_path_offset (blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+		path = fdt_getprop (blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif /* CONFIG_PCI || CONFIG_PCI1 */
+#ifdef CONFIG_PCIE1
+		path = fdt_getprop (blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif /* CONFIG_PCIE1 */
+	}
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
+
+#ifdef CONFIG_BOARD_EARLY_INIT_R
+int board_early_init_r (void)
+{
+#ifdef CONFIG_PS2MULT
+	ps2mult_early_init ();
+#endif /* CONFIG_PS2MULT */
+	return (0);
+}
+#endif /* CONFIG_BOARD_EARLY_INIT_R */
diff --git a/board/tqm85xx/u-boot.lds b/board/tqc/tqm85xx/u-boot.lds
index 8cb551ae4b..8cb551ae4b 100644
--- a/board/tqm85xx/u-boot.lds
+++ b/board/tqc/tqm85xx/u-boot.lds
diff --git a/board/tqm8xx/Makefile b/board/tqc/tqm8xx/Makefile
index b48934b429..b48934b429 100644
--- a/board/tqm8xx/Makefile
+++ b/board/tqc/tqm8xx/Makefile
diff --git a/board/tqm8xx/config.mk b/board/tqc/tqm8xx/config.mk
index 9d6080b84a..9d6080b84a 100644
--- a/board/tqm8xx/config.mk
+++ b/board/tqc/tqm8xx/config.mk
diff --git a/board/tqm8xx/flash.c b/board/tqc/tqm8xx/flash.c
index 4342ebc841..4342ebc841 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqc/tqm8xx/flash.c
diff --git a/board/tqm8xx/load_sernum_ethaddr.c b/board/tqc/tqm8xx/load_sernum_ethaddr.c
index 143f36801d..143f36801d 100644
--- a/board/tqm8xx/load_sernum_ethaddr.c
+++ b/board/tqc/tqm8xx/load_sernum_ethaddr.c
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 18bf2a8302..18bf2a8302 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
diff --git a/board/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
index 8c46e4677f..8c46e4677f 100644
--- a/board/tqm8xx/u-boot.lds
+++ b/board/tqc/tqm8xx/u-boot.lds
diff --git a/board/tqm8xx/u-boot.lds.debug b/board/tqc/tqm8xx/u-boot.lds.debug
index c33581d250..c33581d250 100644
--- a/board/tqm8xx/u-boot.lds.debug
+++ b/board/tqc/tqm8xx/u-boot.lds.debug
diff --git a/board/tqm85xx/law.c b/board/tqm85xx/law.c
deleted file mode 100644
index 224af6ca77..0000000000
--- a/board/tqm85xx/law.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000	   0x7fff_ffff	   DDR			   2G
- * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
- * 0xc000_0000	   0xdfff_ffff	   RapidIO		   512M
- * 0xe000_0000	   0xe000_ffff	   CCSR			   1M
- * 0xe200_0000	   0xe2ff_ffff	   PCI1 IO		   16M
- * 0xf800_0000	   0xf80f_ffff	   BCSR			   1M
- * 0xfe00_0000	   0xffff_ffff	   FLASH (boot bank)	   32M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-struct law_entry law_table[] = {
-	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
-	SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
-	SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/tqm85xx/sdram.c b/board/tqm85xx/sdram.c
deleted file mode 100644
index 788a48cd13..0000000000
--- a/board/tqm85xx/sdram.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-struct sdram_conf_s {
-	unsigned long size;
-	unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-sdram_conf_t ddr_cs_conf[] = {
-	{(512 << 20), 0x80000202},	/* 512MB, 14x10(4)	*/
-	{(256 << 20), 0x80000102},	/* 256MB, 13x10(4)	*/
-	{(128 << 20), 0x80000101},	/* 128MB, 13x9(4)	*/
-	{(64  << 20), 0x80000001},	/* 64MB,  12x9(4)	*/
-};
-
-#define	N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
-
-int cas_latency(void);
-
-/*
- * Autodetect onboard DDR SDRAM on 85xx platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- *       so this should be extended for other future boards
- *       using this routine!
- */
-long int sdram_setup(int casl)
-{
-	int i;
-	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
-	unsigned long cfg_ddr_timing1;
-	unsigned long cfg_ddr_mode;
-
-	/*
-	 * Disable memory controller.
-	 */
-	ddr->cs0_config = 0;
-	ddr->sdram_cfg = 0;
-
-	switch (casl) {
-	case 20:
-		cfg_ddr_timing1 = 0x47405331 | (3 << 16);
-		cfg_ddr_mode = 0x40020002 | (2 << 4);
-		break;
-
-	case 25:
-		cfg_ddr_timing1 = 0x47405331 | (4 << 16);
-		cfg_ddr_mode = 0x40020002 | (6 << 4);
-		break;
-
-	case 30:
-	default:
-		cfg_ddr_timing1 = 0x47405331 | (5 << 16);
-		cfg_ddr_mode = 0x40020002 | (3 << 4);
-		break;
-	}
-
-	ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
-	ddr->cs0_config = ddr_cs_conf[0].reg;
-	ddr->timing_cfg_1 = cfg_ddr_timing1;
-	ddr->timing_cfg_2 = 0x00000800;		/* P9-45,may need tuning */
-	ddr->sdram_mode = cfg_ddr_mode;
-	ddr->sdram_interval = 0x05160100;	/* autocharge,no open page */
-	ddr->err_disable = 0x0000000D;
-
-	asm ("sync;isync;msync");
-	udelay(1000);
-
-	ddr->sdram_cfg = 0xc2000000;		/* unbuffered,no DYN_PWR */
-	asm ("sync; isync; msync");
-	udelay(1000);
-
-	for (i=0; i<N_DDR_CS_CONF; i++) {
-		ddr->cs0_config = ddr_cs_conf[i].reg;
-
-		if (get_ram_size(0, ddr_cs_conf[i].size) == ddr_cs_conf[i].size) {
-			/*
-			 * OK, size detected -> all done
-			 */
-			return ddr_cs_conf[i].size;
-		}
-	}
-
-	return 0;				/* nothing found !		*/
-}
-
-void board_add_ram_info(int use_default)
-{
-	int casl;
-
-	if (use_default)
-		casl = CONFIG_DDR_DEFAULT_CL;
-	else
-		casl = cas_latency();
-
-	puts(" (CL=");
-	switch (casl) {
-	case 20:
-		puts("2)");
-		break;
-
-	case 25:
-		puts("2.5)");
-		break;
-
-	case 30:
-		puts("3)");
-		break;
-	}
-}
-
-long int initdram (int board_type)
-{
-	long dram_size = 0;
-	int casl;
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * This DLL-Override only used on TQM8540 and TQM8560
-	 */
-	{
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-		int i,x;
-
-		x = 10;
-
-		/*
-		 * Work around to stabilize DDR DLL
-		 */
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay (200);
-		while (gur->ddrdllcr != 0x81000100) {
-			gur->devdisr = gur->devdisr | 0x00010000;
-			asm("sync;isync;msync");
-			for (i=0; i<x; i++)
-				;
-			gur->devdisr = gur->devdisr & 0xfff7ffff;
-			asm("sync;isync;msync");
-			x++;
-		}
-	}
-#endif
-
-	casl = cas_latency();
-	dram_size = sdram_setup(casl);
-	if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
-		/*
-		 * Try again with default CAS latency
-		 */
-		puts("Problem with CAS lantency");
-		board_add_ram_info(1);
-		puts(", using default CL!\n");
-		casl = CONFIG_DDR_DEFAULT_CL;
-		dram_size = sdram_setup(casl);
-		puts("       ");
-	}
-
-	return dram_size;
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf ("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test passed.\n");
-	return 0;
-}
-#endif
diff --git a/board/tqm85xx/tlb.c b/board/tqm85xx/tlb.c
deleted file mode 100644
index ad26caeea2..0000000000
--- a/board/tqm85xx/tlb.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-
-	/*
-	 * TLB 0, 1:	128M	Non-cacheable, guarded
-	 * 0xf8000000	128M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_64M, 1),
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 5:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 6:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLB 7+8:	512M	DDR, cache disabled (needed for memory test)
-	 * 0x00000000  512M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_256M, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
deleted file mode 100644
index 8fa0162d83..0000000000
--- a/board/tqm85xx/tqm85xx.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[];	/* FLASH chips info */
-
-void local_bus_init (void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init(void);
-#endif
-
-#ifdef CONFIG_CPM2
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII COL */
-	/* PA30 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII CRS */
-	/* PA29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_ER */
-	/* PA28 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_EN */
-	/* PA27 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_DV */
-	/* PA26 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_ER */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[3] */
-	/* PA20 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[2] */
-	/* PA19 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[1] */
-	/* PA18 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[0] */
-	/* PA17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[0] */
-	/* PA16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[1] */
-	/* PA15 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[2] */
-	/* PA14 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[3] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   0,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* PC17 */
-	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   0,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   1,   0,   0,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   0,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   1,   1,   0,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   1,   1,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-#endif /*  CONFIG_CPM2 */
-
-#define CASL_STRING1	"casl=xx"
-#define CASL_STRING2	"casl="
-
-static const int casl_table[] = { 20, 25, 30 };
-#define	N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
-
-int cas_latency(void)
-{
-	char *s = getenv("serial#");
-	int casl;
-	int val;
-	int i;
-
-	casl = CONFIG_DDR_DEFAULT_CL;
-
-	if (s != NULL) {
-		if (strncmp(s + strlen(s) - strlen(CASL_STRING1), CASL_STRING2,
-			    strlen(CASL_STRING2)) == 0) {
-			val = simple_strtoul(s + strlen(s) - 2, NULL, 10);
-
-			for (i=0; i<N_CASL; ++i) {
-				if (val == casl_table[i]) {
-					return val;
-				}
-			}
-		}
-	}
-
-	return casl;
-}
-
-int checkboard (void)
-{
-	char *s = getenv("serial#");
-
-	printf("Board: %s", CONFIG_BOARDNAME);
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-#ifdef CONFIG_PCI
-	printf ("PCI1:  32 bit, %d MHz (compiled)\n",
-		CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf ("PCI1:  disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
-
-	/*
-	 * Adjust flash start and offset to detected values
-	 */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Check if boot FLASH isn't max size
-	 */
-	if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {
-		memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);
-		memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);
-
-		/*
-		 * Re-check to get correct base address
-		 */
-		flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
-	}
-
-	/*
-	 * Check if only one FLASH bank is available
-	 */
-	if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
-		memctl->or1 = 0;
-		memctl->br1 = 0;
-
-		/*
-		 * Re-do flash protection upon new addresses
-		 */
-		flash_protect (FLAG_PROTECT_CLEAR,
-			       gd->bd->bi_flashstart, 0xffffffff,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Monitor protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-		/* Redundant environment protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR_REDUND,
-			       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-	}
-
-	return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void local_bus_init (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info (&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-		lbc->ltedr = 0xa4c80000;	/* DK: !!! */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);	/* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr ();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);	/* DLL Enabled */
-		udelay (200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm ("sync;isync;msync");
-	}
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_mpc85xxads_config_table,
-#endif
-};
-
-#endif /* CONFIG_PCI */
-
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init (&hose);
-#endif /* CONFIG_PCI */
-}
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_PS2MULT
-	ps2mult_early_init();
-#endif /* CONFIG_PS2MULT */
-	return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 98733834e0..2b7e753ece 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -29,41 +29,45 @@
 #include <watchdog.h>
 #include <command.h>
 #include <asm/cache.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-struct cpu_type {
-	char name[15];
-	u32 soc_ver;
+struct cpu_type cpu_type_list [] = {
+	CPU_TYPE_ENTRY(8533, 8533),
+	CPU_TYPE_ENTRY(8533, 8533_E),
+	CPU_TYPE_ENTRY(8540, 8540),
+	CPU_TYPE_ENTRY(8541, 8541),
+	CPU_TYPE_ENTRY(8541, 8541_E),
+	CPU_TYPE_ENTRY(8543, 8543),
+	CPU_TYPE_ENTRY(8543, 8543_E),
+	CPU_TYPE_ENTRY(8544, 8544),
+	CPU_TYPE_ENTRY(8544, 8544_E),
+	CPU_TYPE_ENTRY(8545, 8545),
+	CPU_TYPE_ENTRY(8545, 8545_E),
+	CPU_TYPE_ENTRY(8547, 8547_E),
+	CPU_TYPE_ENTRY(8548, 8548),
+	CPU_TYPE_ENTRY(8548, 8548_E),
+	CPU_TYPE_ENTRY(8555, 8555),
+	CPU_TYPE_ENTRY(8555, 8555_E),
+	CPU_TYPE_ENTRY(8560, 8560),
+	CPU_TYPE_ENTRY(8567, 8567),
+	CPU_TYPE_ENTRY(8567, 8567_E),
+	CPU_TYPE_ENTRY(8568, 8568),
+	CPU_TYPE_ENTRY(8568, 8568_E),
+	CPU_TYPE_ENTRY(8572, 8572),
+	CPU_TYPE_ENTRY(8572, 8572_E),
 };
 
-#define CPU_TYPE_ENTRY(x) {#x, SVR_##x}
+struct cpu_type *identify_cpu(uint ver)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
+		if (cpu_type_list[i].soc_ver == ver)
+			return &cpu_type_list[i];
 
-struct cpu_type cpu_type_list [] = {
-	CPU_TYPE_ENTRY(8533),
-	CPU_TYPE_ENTRY(8533_E),
-	CPU_TYPE_ENTRY(8540),
-	CPU_TYPE_ENTRY(8541),
-	CPU_TYPE_ENTRY(8541_E),
-	CPU_TYPE_ENTRY(8543),
-	CPU_TYPE_ENTRY(8543_E),
-	CPU_TYPE_ENTRY(8544),
-	CPU_TYPE_ENTRY(8544_E),
-	CPU_TYPE_ENTRY(8545),
-	CPU_TYPE_ENTRY(8545_E),
-	CPU_TYPE_ENTRY(8547_E),
-	CPU_TYPE_ENTRY(8548),
-	CPU_TYPE_ENTRY(8548_E),
-	CPU_TYPE_ENTRY(8555),
-	CPU_TYPE_ENTRY(8555_E),
-	CPU_TYPE_ENTRY(8560),
-	CPU_TYPE_ENTRY(8567),
-	CPU_TYPE_ENTRY(8567_E),
-	CPU_TYPE_ENTRY(8568),
-	CPU_TYPE_ENTRY(8568_E),
-	CPU_TYPE_ENTRY(8572),
-	CPU_TYPE_ENTRY(8572_E),
-};
+	return NULL;
+}
 
 int checkcpu (void)
 {
@@ -74,9 +78,13 @@ int checkcpu (void)
 	uint fam;
 	uint ver;
 	uint major, minor;
-	int i;
-	u32 ddr_ratio;
+	struct cpu_type *cpu;
+#ifdef CONFIG_DDR_CLK_FREQ
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+#else
+	u32 ddr_ratio = 0;
+#endif
 
 	svr = get_svr();
 	ver = SVR_SOC_VER(svr);
@@ -85,14 +93,15 @@ int checkcpu (void)
 
 	puts("CPU:   ");
 
-	for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
-		if (cpu_type_list[i].soc_ver == ver) {
-			puts(cpu_type_list[i].name);
-			break;
-		}
+	cpu = identify_cpu(ver);
+	if (cpu) {
+		puts(cpu->name);
 
-	if (i == ARRAY_SIZE(cpu_type_list))
+		if (svr & 0x80000)
+			puts("E");
+	} else {
 		puts("Unknown");
+	}
 
 	printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
 
@@ -118,7 +127,7 @@ int checkcpu (void)
 	puts("Clock Configuration:\n");
 	printf("       CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
 	printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
-	ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+
 	switch (ddr_ratio) {
 	case 0x0:
 		printf("       DDR:%4lu MHz (%lu MT/s data rate), ",
@@ -159,7 +168,7 @@ int checkcpu (void)
 	}
 
 #ifdef CONFIG_CPM2
-	printf("CPM:  %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+	printf("CPM:   %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
 #endif
 
 	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");
@@ -279,3 +288,68 @@ int dma_xfer(void *dest, uint count, void *src) {
 	return dma_check();
 }
 #endif
+/*
+ * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF)
+ * are hardcoded as "1"."size" is the number or entries, not a sizeof.
+ */
+void upmconfig (uint upm, uint * table, uint size)
+{
+	int i, mdr, mad, old_mad = 0;
+	volatile u32 *mxmr;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	int loopval = 0x00004440;
+	volatile u32 *brp,*orp;
+	volatile u8* dummy = NULL;
+	int upmmask;
+
+	switch (upm) {
+	case UPMA:
+		mxmr = &lbc->mamr;
+		upmmask = BR_MS_UPMA;
+		break;
+	case UPMB:
+		mxmr = &lbc->mbmr;
+		upmmask = BR_MS_UPMB;
+		break;
+	case UPMC:
+		mxmr = &lbc->mcmr;
+		upmmask = BR_MS_UPMC;
+		break;
+	default:
+		printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
+		hang();
+	}
+
+	/* Find the address for the dummy write transaction */
+	for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
+		 i++, brp += 2, orp += 2) {
+		
+		/* Look for a valid BR with selected UPM */
+		if ((in_be32(brp) & (BR_V | upmmask)) == (BR_V | upmmask)) {
+			dummy = (volatile u8*)(in_be32(brp) >> BR_BA_SHIFT);
+			break;
+		}
+	}
+
+	if (i == 8) {
+		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+		hang();
+	}
+
+	for (i = 0; i < size; i++) {
+		/* 1 */
+		out_be32(mxmr, loopval | 0x10000000 | i); /* OP_WRITE */
+		/* 2 */
+		out_be32(&lbc->mdr, table[i]);
+		/* 3 */
+		mdr = in_be32(&lbc->mdr);
+		/* 4 */
+		*(volatile u8 *)dummy = 0;
+		/* 5 */
+		do {
+			mad = in_be32(mxmr) & 0x3f;
+		} while (mad <= old_mad && !(!mad && i == (size-1)));
+		old_mad = mad;
+	}
+	out_be32(mxmr, loopval); /* OP_NORMAL */
+}
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index e3240b519e..736aef1725 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -148,6 +148,12 @@ void cpu_init_early_f(void)
 	}
 #endif
 
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+	/* Clear initial global data */
+	memset ((void *) gd, 0, sizeof (gd_t));
+
 	init_laws();
 	invalidate_tlb(0);
 	init_tlbs();
@@ -168,12 +174,6 @@ void cpu_init_f (void)
 	disable_tlb(14);
 	disable_tlb(15);
 
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
-
-	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
-
 #ifdef CONFIG_CPM2
 	config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
 #endif
@@ -254,16 +254,7 @@ void cpu_init_f (void)
 
 int cpu_init_r(void)
 {
-#ifdef CONFIG_CLEAR_LAW0
-#ifdef CONFIG_FSL_LAW
-	disable_law(0);
-#else
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-
-	/* clear alternate boot location LAW (used for sdram, or ddr bank) */
-	ecm->lawar0 = 0;
-#endif
-#endif
+	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
 	volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
@@ -281,17 +272,17 @@ int cpu_init_r(void)
 	case 0x20000000:
 		if (ver == SVR_8548 || ver == SVR_8548_E ||
 		    ver == SVR_8544 || ver == SVR_8568_E) {
-			printf ("L2 cache 512KB:");
+			puts ("512 KB ");
 			/* set L2E=1, L2I=1, & L2SRAM=0 */
 			cache_ctl = 0xc0000000;
 		} else {
-			printf ("L2 cache 256KB:");
+			puts("256 KB ");
 			/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
 			cache_ctl = 0xc8000000;
 		}
 		break;
 	case 0x10000000:
-		printf ("L2 cache 256KB:");
+		puts("256 KB ");
 		if (ver == SVR_8544 || ver == SVR_8544_E) {
 			cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
 		}
@@ -299,18 +290,18 @@ int cpu_init_r(void)
 	case 0x30000000:
 	case 0x00000000:
 	default:
-		printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
+		printf(" unknown size (0x%08x)\n", cache_ctl);
 		return -1;
 	}
 
 	if (l2cache->l2ctl & 0x80000000) {
-		printf(" already enabled.");
+		puts("already enabled");
 		l2srbar = l2cache->l2srbar0;
 #ifdef CFG_INIT_L2_ADDR
 		if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
 			l2srbar = CFG_INIT_L2_ADDR;
 			l2cache->l2srbar0 = l2srbar;
-			printf("  Moving to 0x%08x", CFG_INIT_L2_ADDR);
+			printf("moving to 0x%08x", CFG_INIT_L2_ADDR);
 		}
 #endif /* CFG_INIT_L2_ADDR */
 		puts("\n");
@@ -318,10 +309,10 @@ int cpu_init_r(void)
 		asm("msync;isync");
 		l2cache->l2ctl = cache_ctl; /* invalidate & enable */
 		asm("msync;isync");
-		printf(" enabled\n");
+		puts("enabled\n");
 	}
 #else
-	printf("L2 cache: disabled\n");
+	puts("disabled\n");
 #endif
 #ifdef CONFIG_QE
 	uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index bb87740baa..92952e6d6e 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <asm/processor.h>
 
 extern void ft_qe_setup(void *blob);
 #ifdef CONFIG_MP
@@ -77,6 +78,131 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
 }
 #endif
 
+#ifdef CONFIG_L2_CACHE
+/* return size in kilobytes */
+static inline u32 l2cache_size(void)
+{
+	volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
+	volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
+	u32 ver = SVR_SOC_VER(get_svr());
+
+	switch (l2siz_field) {
+	case 0x0:
+		break;
+	case 0x1:
+		if (ver == SVR_8540 || ver == SVR_8560   ||
+		    ver == SVR_8541 || ver == SVR_8541_E ||
+		    ver == SVR_8555 || ver == SVR_8555_E)
+			return 128;
+		else
+			return 256;
+		break;
+	case 0x2:
+		if (ver == SVR_8540 || ver == SVR_8560   ||
+		    ver == SVR_8541 || ver == SVR_8541_E ||
+		    ver == SVR_8555 || ver == SVR_8555_E)
+			return 256;
+		else
+			return 512;
+		break;
+	case 0x3:
+		return 1024;
+		break;
+	}
+
+	return 0;
+}
+
+static inline void ft_fixup_l2cache(void *blob)
+{
+	int len, off;
+	u32 *ph;
+	struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
+	char compat_buf[38];
+
+	const u32 line_size = 32;
+	const u32 num_ways = 8;
+	const u32 size = l2cache_size() * 1024;
+	const u32 num_sets = size / (line_size * num_ways);
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	if (off < 0) {
+		debug("no cpu node fount\n");
+		return;
+	}
+
+	ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+	if (ph == NULL) {
+		debug("no next-level-cache property\n");
+		return ;
+	}
+
+	off = fdt_node_offset_by_phandle(blob, *ph);
+	if (off < 0) {
+		printf("%s: %s\n", __func__, fdt_strerror(off));
+		return ;
+	}
+
+	if (cpu) {
+		len = sprintf(compat_buf, "fsl,mpc%s-l2-cache-controller",
+				cpu->name);
+		sprintf(&compat_buf[len + 1], "cache");
+	}
+	fdt_setprop(blob, off, "cache-unified", NULL, 0);
+	fdt_setprop_cell(blob, off, "cache-block-size", line_size);
+	fdt_setprop_cell(blob, off, "cache-line-size", line_size);
+	fdt_setprop_cell(blob, off, "cache-size", size);
+	fdt_setprop_cell(blob, off, "cache-sets", num_sets);
+	fdt_setprop_cell(blob, off, "cache-level", 2);
+	fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
+}
+#else
+#define ft_fixup_l2cache(x)
+#endif
+
+static inline void ft_fixup_cache(void *blob)
+{
+	int off;
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+	while (off != -FDT_ERR_NOTFOUND) {
+		u32 l1cfg0 = mfspr(SPRN_L1CFG0);
+		u32 l1cfg1 = mfspr(SPRN_L1CFG1);
+		u32 isize, iline_size, inum_sets, inum_ways;
+		u32 dsize, dline_size, dnum_sets, dnum_ways;
+
+		/* d-side config */
+		dsize = (l1cfg0 & 0x7ff) * 1024;
+		dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
+		dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
+		dnum_sets = dsize / (dline_size * dnum_ways);
+
+		fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
+		fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
+		fdt_setprop_cell(blob, off, "d-cache-size", dsize);
+		fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
+
+		/* i-side config */
+		isize = (l1cfg1 & 0x7ff) * 1024;
+		inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
+		iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
+		inum_sets = isize / (iline_size * inum_ways);
+
+		fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
+		fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
+		fdt_setprop_cell(blob, off, "i-cache-size", isize);
+		fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
+
+		off = fdt_node_offset_by_prop_value(blob, off,
+				"device_type", "cpu", 4);
+	}
+
+	ft_fixup_l2cache(blob);
+}
+
+
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
@@ -114,4 +240,6 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_MP
 	ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
 #endif
+
+	ft_fixup_cache(blob);
 }
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index e3a824999c..8e321eb073 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -1090,7 +1090,7 @@ setup_laws_and_tlbs(unsigned int memsize)
 	 */
 
 #ifdef CONFIG_FSL_LAW
-	set_law(1, CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
+	set_next_law(CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
 #endif
 
 	/*
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index 2381fb0654..fd36658cb0 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -50,10 +50,12 @@ int (*debugger_exception_handler)(struct pt_regs *) = 0;
 extern unsigned long search_exception_table(unsigned long);
 
 /*
- * End of memory as shown by board info and determined by DDR setup.
+ * End of addressable memory.  This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
  */
-#define END_OF_MEM	(gd->bd->bi_memstart + gd->bd->bi_memsize)
-
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
 
 static __inline__ void set_tsr(unsigned long val)
 {
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 0efd855a39..78ba1ea8e5 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -119,8 +119,5 @@ void cpu_init_f(void)
  */
 int cpu_init_r(void)
 {
-#ifdef CONFIG_FSL_LAW
-	disable_law(0);
-#endif
 	return 0;
 }
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 5cc0c266f0..e26db7c3bf 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -1183,7 +1183,7 @@ spd_sdram(void)
 		 * Set up LAWBAR for DDR 1 space.
 		 */
 #ifdef CONFIG_FSL_LAW
-		set_law(1, CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
+		set_next_law(CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
 #endif
 		debug("Interleaved memory size is 0x%08lx\n", memsize_total);
 
@@ -1238,7 +1238,7 @@ spd_sdram(void)
 		 * Set up LAWBAR for DDR 1 space.
 		 */
 #ifdef CONFIG_FSL_LAW
-		set_law(1, CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
+		set_next_law(CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
 #endif
 	}
 
@@ -1265,7 +1265,7 @@ spd_sdram(void)
 		 * Set up LAWBAR for DDR 2 space.
 		 */
 #ifdef CONFIG_FSL_LAW
-		set_law(8,
+		set_next_law(
 			(ddr1_enabled ? (memsize_ddr1 * 1024 * 1024) : CFG_DDR_SDRAM_BASE),
 			law_size_ddr2, LAW_TRGT_IF_DDR_2);
 #endif
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 4e304f7407..c1741eac67 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -49,7 +49,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #error CONFIG_PS2SERIAL must be in 1 ... 6
 #endif
 
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 
 #if CONFIG_PS2SERIAL == 1
 #define COM_BASE (CFG_CCSRBAR+0x4500)
@@ -65,7 +66,9 @@ static int	ps2ser_getc_hw(void);
 static void	ps2ser_interrupt(void *dev_id);
 
 extern struct	serial_state rs_table[]; /* in serial.c */
-#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && !defined(CONFIG_MPC8555)
+#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC8540) && \
+    !defined(CONFIG_MPC8541) && !defined(CONFIG_MPC8548) && \
+    !defined(CONFIG_MPC8555)
 static struct	serial_state *state;
 #endif
 
@@ -120,7 +123,8 @@ int ps2ser_init(void)
 	return (0);
 }
 
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 int ps2ser_init(void)
 {
 	NS16550_t com_port = (NS16550_t)COM_BASE;
@@ -186,7 +190,8 @@ void ps2ser_putc(int chr)
 {
 #ifdef CONFIG_MPC5xxx
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 	NS16550_t com_port = (NS16550_t)COM_BASE;
 #endif
 #ifdef DEBUG
@@ -197,7 +202,8 @@ void ps2ser_putc(int chr)
 	while (!(psc->psc_status & PSC_SR_TXRDY));
 
 	psc->psc_buffer_8 = chr;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 	while ((com_port->lsr & LSR_THRE) == 0);
 	com_port->thr = chr;
 #else
@@ -211,7 +217,8 @@ static int ps2ser_getc_hw(void)
 {
 #ifdef CONFIG_MPC5xxx
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 	NS16550_t com_port = (NS16550_t)COM_BASE;
 #endif
 	int res = -1;
@@ -220,7 +227,8 @@ static int ps2ser_getc_hw(void)
 	if (psc->psc_status & PSC_SR_RXRDY) {
 		res = (psc->psc_buffer_8);
 	}
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 	if (com_port->lsr & LSR_DR) {
 		res = com_port->rbr;
 	}
@@ -279,7 +287,8 @@ static void ps2ser_interrupt(void *dev_id)
 {
 #ifdef CONFIG_MPC5xxx
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 	NS16550_t com_port = (NS16550_t)COM_BASE;
 #endif
 	int chr;
@@ -289,7 +298,8 @@ static void ps2ser_interrupt(void *dev_id)
 		chr = ps2ser_getc_hw();
 #ifdef CONFIG_MPC5xxx
 		status = psc->psc_status;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 		status = com_port->lsr;
 #else
 		status = ps2ser_in(UART_IIR);
@@ -305,7 +315,8 @@ static void ps2ser_interrupt(void *dev_id)
 		}
 #ifdef CONFIG_MPC5xxx
 	} while (status & PSC_SR_RXRDY);
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+      defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 	} while (status & LSR_DR);
 #else
 	} while (status & UART_IIR_RDI);
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index dca6a4da4a..48ece4f090 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -27,8 +27,22 @@
 #include <asm/fsl_law.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define LAWAR_EN	0x80000000
-#define FSL_HW_NUM_LAWS 10	/* number of LAWs in the hw implementation */
+/* number of LAWs in the hw implementation */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+    defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
+#define FSL_HW_NUM_LAWS 8
+#elif defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
+      defined(CONFIG_MPC8568) || \
+      defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
+#define FSL_HW_NUM_LAWS 10
+#elif defined(CONFIG_MPC8572)
+#define FSL_HW_NUM_LAWS 12
+#else
+#error FSL_HW_NUM_LAWS not defined for this platform
+#endif
 
 void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
@@ -36,18 +50,53 @@ void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 	volatile u32 *lawbar = base + 8 * idx;
 	volatile u32 *lawar = base + 8 * idx + 2;
 
+	gd->used_laws |= (1 << idx);
+
 	out_be32(lawbar, addr >> 12);
 	out_be32(lawar, LAWAR_EN | ((u32)id << 20) | (u32)sz);
 
 	return ;
 }
 
+int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+	u32 idx = ffz(gd->used_laws);
+
+	if (idx >= FSL_HW_NUM_LAWS)
+		return -1;
+
+	set_law(idx, addr, sz, id);
+
+	return idx;
+}
+
+int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+	u32 idx;
+
+	/* we have no LAWs free */
+	if (gd->used_laws == -1)
+		return -1;
+
+	/* grab the last free law */
+	idx = __ilog2(~(gd->used_laws));
+
+	if (idx >= FSL_HW_NUM_LAWS)
+		return -1;
+
+	set_law(idx, addr, sz, id);
+
+	return idx;
+}
+
 void disable_law(u8 idx)
 {
 	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
 	volatile u32 *lawbar = base + 8 * idx;
 	volatile u32 *lawar = base + 8 * idx + 2;
 
+	gd->used_laws &= ~(1 << idx);
+
 	out_be32(lawar, 0);
 	out_be32(lawbar, 0);
 
@@ -75,14 +124,16 @@ void print_laws(void)
 void init_laws(void)
 {
 	int i;
-	u8 law_idx = 0;
 
-	for (i = 0; i < num_law_entries; i++) {
-		if (law_table[i].index != -1)
-			law_idx = law_table[i].index;
+	gd->used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
 
-		set_law(law_idx++, law_table[i].addr,
-			law_table[i].size, law_table[i].trgt_id);
+	for (i = 0; i < num_law_entries; i++) {
+		if (law_table[i].index == -1)
+			set_next_law(law_table[i].addr, law_table[i].size,
+					law_table[i].trgt_id);
+		else
+			set_law(law_table[i].index, law_table[i].addr,
+				law_table[i].size, law_table[i].trgt_id);
 	}
 
 	return ;
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 5cc410a5e2..67ae9c8d5b 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -20,112 +20,83 @@
 #include <linux/mtd/fsl_upm.h>
 #include <nand.h>
 
-#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
-#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
-#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
-#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
+static int fsl_upm_in_pattern;
 
 static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
 {
-	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+	clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
 }
 
 static void fsl_upm_end_pattern(struct fsl_upm *upm)
 {
-	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
-	while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+	clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
+
+	while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
 		eieio();
 }
 
 static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
 {
-	out_be32(upm->mar, cmd << (32 - width * 8));
-	out_8(upm->io_addr, 0x0);
-}
-
-static void fsl_upm_setup(struct fsl_upm *upm)
-{
-	int i;
-
-	/* write upm array */
-	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
-
-	for (i = 0; i < 64; i++) {
-		out_be32(upm->mdr, upm->array[i]);
+	out_be32(upm->mar, cmd << (32 - width));
+	switch (width) {
+	case 8:
 		out_8(upm->io_addr, 0x0);
+		break;
+	case 16:
+		out_be16(upm->io_addr, 0x0);
+		break;
+	case 32:
+		out_be32(upm->io_addr, 0x0);
+		break;
 	}
-
-	/* normal operation */
-	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
-	while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
-		eieio();
 }
 
-static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
-			int page_addr)
+static void nand_hwcontrol (struct mtd_info *mtd, int cmd)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_upm_nand *fun = chip->priv;
 
-	fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
-
-	if (command == NAND_CMD_SEQIN) {
-		int readcmd;
-
-		if (column >= mtd->oobblock) {
-			/* OOB area */
-			column -= mtd->oobblock;
-			readcmd = NAND_CMD_READOOB;
-		} else if (column < 256) {
-			/* First 256 bytes --> READ0 */
-			readcmd = NAND_CMD_READ0;
-		} else {
-			column -= 256;
-			readcmd = NAND_CMD_READ1;
-		}
-		fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+	switch (cmd) {
+	case NAND_CTL_SETCLE:
+		fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+		fsl_upm_in_pattern++;
+		break;
+	case NAND_CTL_SETALE:
+		fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+		fsl_upm_in_pattern++;
+		break;
+	case NAND_CTL_CLRCLE:
+	case NAND_CTL_CLRALE:
+		fsl_upm_end_pattern(&fun->upm);
+		fsl_upm_in_pattern--;
+		break;
 	}
+}
 
-	fsl_upm_run_pattern(&fun->upm, fun->width, command);
-
-	fsl_upm_end_pattern(&fun->upm);
-
-	fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
-
-	if (column != -1)
-		fsl_upm_run_pattern(&fun->upm, fun->width, column);
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *chip = mtd->priv;
 
-	if (page_addr != -1) {
-		fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
-		fsl_upm_run_pattern(&fun->upm, fun->width,
-				    (page_addr >> 8) & 0xFF);
-		if (chip->chipsize > (32 << 20)) {
-			fsl_upm_run_pattern(&fun->upm, fun->width,
-					    (page_addr >> 16) & 0x0f);
-		}
-	}
+	if (fsl_upm_in_pattern) {
+		struct fsl_upm_nand *fun = chip->priv;
 
-	fsl_upm_end_pattern(&fun->upm);
+		fsl_upm_run_pattern(&fun->upm, fun->width, byte);
 
-	if (fun->wait_pattern) {
 		/*
 		 * Some boards/chips needs this. At least on MPC8360E-RDK we
 		 * need it. Probably weird chip, because I don't see any need
 		 * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
 		 * 0-2 unexpected busy states per block read.
 		 */
-		while (!fun->dev_ready())
-			debug("unexpected busy state\n");
+		if (fun->wait_pattern) {
+			while (!fun->dev_ready())
+				debug("unexpected busy state\n");
+		}
+	} else {
+		out_8(chip->IO_ADDR_W, byte);
 	}
 }
 
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	out_8(chip->IO_ADDR_W, byte);
-}
-
 static u8 nand_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
@@ -164,10 +135,6 @@ static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	return 0;
 }
 
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-}
-
 static int nand_dev_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
@@ -178,23 +145,20 @@ static int nand_dev_ready(struct mtd_info *mtd)
 
 int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
 {
-	/* yet only 8 bit accessors implemented */
-	if (fun->width != 1)
+	if (fun->width != 8 && fun->width != 16 && fun->width != 32)
 		return -ENOSYS;
 
-	fsl_upm_setup(&fun->upm);
-
 	chip->priv = fun;
 	chip->chip_delay = fun->chip_delay;
 	chip->eccmode = NAND_ECC_SOFT;
-	chip->cmdfunc = fun_cmdfunc;
 	chip->hwcontrol = nand_hwcontrol;
 	chip->read_byte = nand_read_byte;
 	chip->read_buf = nand_read_buf;
 	chip->write_byte = nand_write_byte;
 	chip->write_buf = nand_write_buf;
 	chip->verify_buf = nand_verify_buf;
-	chip->dev_ready = nand_dev_ready;
+	if (fun->dev_ready)
+		chip->dev_ready = nand_dev_ready;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5aef31cd18..740d3fcc37 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -113,18 +113,22 @@ static struct nand_oobinfo nand_oob_64 = {
 	.oobfree = { {2, 38} }
 };
 
-/* This is used for padding purposes in nand_write_oob */
-static u_char ffchars[] = {
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+static struct nand_oobinfo nand_oob_128 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 48,
+	.eccpos = {
+		80,  81,  82,  83,  84,  85,  86,  87,
+		88,  89,  90,  91,  92,  93,  94,  95,
+		96,  97,  98,  99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127},
+	.oobfree = { {2, 78} }
 };
 
+/* This is used for padding purposes in nand_write_oob */
+static u_char *ffchars;
+
 /*
  * NAND low-level MTD interface functions
  */
@@ -193,6 +197,10 @@ static void nand_release_device (struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 	this->select_chip(mtd, -1);	/* De-select the NAND device */
+	if (ffchars) {
+		kfree(ffchars);
+		ffchars = NULL;
+	}
 }
 #endif
 
@@ -891,7 +899,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
 	u_char *oob_buf,  struct nand_oobinfo *oobsel, int cached)
 {
 	int	i, status;
-	u_char	ecc_code[32];
+	u_char	ecc_code[NAND_MAX_OOBSIZE];
 	int	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
 	uint	*oob_config = oobsel->eccpos;
 	int	datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
@@ -1112,8 +1120,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
 	struct nand_chip *this = mtd->priv;
 	u_char *data_poi, *oob_data = oob_buf;
-	u_char ecc_calc[32];
-	u_char ecc_code[32];
+	u_char ecc_calc[NAND_MAX_OOBSIZE];
+	u_char ecc_code[NAND_MAX_OOBSIZE];
 	int eccmode, eccsteps;
 	unsigned *oob_config;
 	int	datidx;
@@ -1811,6 +1819,15 @@ static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t *
 	if (NAND_MUST_PAD(this)) {
 		/* Write out desired data */
 		this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
+		if (!ffchars) {
+			if (!(ffchars = kmalloc (mtd->oobsize, GFP_KERNEL))) {
+				DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+					   "No memory for padding array, need %d bytes", mtd->oobsize);
+				ret = -ENOMEM;
+				goto out;
+			}
+			memset(ffchars, 0xff, mtd->oobsize);
+		}
 		/* prepad 0xff for partial programming */
 		this->write_buf(mtd, ffchars, column);
 		/* write data */
@@ -2479,6 +2496,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		case 64:
 			this->autooob = &nand_oob_64;
 			break;
+		case 128:
+			this->autooob = &nand_oob_128;
+			break;
 		default:
 			printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
 				mtd->oobsize);
diff --git a/include/asm-ppc/fsl_law.h b/include/asm-ppc/fsl_law.h
index e955c756e8..227bf8326c 100644
--- a/include/asm-ppc/fsl_law.h
+++ b/include/asm-ppc/fsl_law.h
@@ -6,6 +6,9 @@
 #define SET_LAW_ENTRY(idx, a, sz, trgt) \
 	{ .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
 
+#define SET_LAW(a, sz, trgt) \
+	{ .index = -1, .addr = a, .size = sz, .trgt_id = trgt }
+
 enum law_size {
 	LAW_SIZE_4K = 0xb,
 	LAW_SIZE_8K,
@@ -70,6 +73,8 @@ struct law_entry {
 };
 
 extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
 extern void disable_law(u8 idx);
 extern void init_laws(void);
 extern void print_laws(void);
diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h
index 4529f028cc..c4af7971b1 100644
--- a/include/asm-ppc/fsl_lbc.h
+++ b/include/asm-ppc/fsl_lbc.h
@@ -59,6 +59,10 @@
 #define BR_V				0x00000001
 #define BR_V_SHIFT			0
 
+#define UPMA			0
+#define UPMB			1
+#define UPMC			2
+
 #if defined(CONFIG_MPC834X)
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
 #else
@@ -161,11 +165,6 @@
 #define OR_UPM_EAD			0x00000001
 #define OR_UPM_EAD_SHIFT		0
 
-#define MxMR_OP_NORM			0x00000000 /* Normal Operation */
-#define MxMR_DSx_2_CYCL 		0x00400000 /* 2 cycle Disable Period */
-#define MxMR_OP_WARR			0x10000000 /* Write to Array */
-#define MxMR_BSEL			0x80000000 /* Bus Select */
-
 #define OR_SDRAM_AM			0xFFFF8000
 #define OR_SDRAM_AM_SHIFT		15
 #define OR_SDRAM_XAM			0x00006000
@@ -198,6 +197,44 @@
 #define OR_AM_2GB			0x80000000
 #define OR_AM_4GB			0x00000000
 
+/* MxMR - UPM Machine A/B/C Mode Registers
+ */
+#define MxMR_MAD_MSK		0x0000003f /* Machine Address Mask	   */
+#define MxMR_TLFx_MSK		0x000003c0 /* Refresh Loop Field Mask	   */
+#define MxMR_WLFx_MSK		0x00003c00 /* Write Loop Field Mask	   */
+#define MxMR_WLFx_1X		0x00000400 /*	executed 1 time		   */
+#define MxMR_WLFx_2X		0x00000800 /*	executed 2 times	   */
+#define MxMR_WLFx_3X		0x00000c00 /*	executed 3 times	   */
+#define MxMR_WLFx_4X		0x00001000 /*	executed 4 times	   */
+#define MxMR_WLFx_5X		0x00001400 /*	executed 5 times	   */
+#define MxMR_WLFx_6X		0x00001800 /*	executed 6 times	   */
+#define MxMR_WLFx_7X		0x00001c00 /*	executed 7 times	   */
+#define MxMR_WLFx_8X		0x00002000 /*	executed 8 times	   */
+#define MxMR_WLFx_9X		0x00002400 /*	executed 9 times	   */
+#define MxMR_WLFx_10X		0x00002800 /*	executed 10 times	   */
+#define MxMR_WLFx_11X		0x00002c00 /*	executed 11 times	   */
+#define MxMR_WLFx_12X		0x00003000 /*	executed 12 times	   */
+#define MxMR_WLFx_13X		0x00003400 /*	executed 13 times	   */
+#define MxMR_WLFx_14X		0x00003800 /*	executed 14 times	   */
+#define MxMR_WLFx_15X		0x00003c00 /*	executed 15 times	   */
+#define MxMR_WLFx_16X		0x00000000 /*	executed 16 times	   */
+#define MxMR_RLFx_MSK		0x0003c000 /* Read Loop Field Mask	   */
+#define MxMR_GPL_x4DIS		0x00040000 /* GPL_A4 Ouput Line Disable	   */
+#define MxMR_G0CLx_MSK		0x00380000 /* General Line 0 Control Mask  */
+#define MxMR_DSx_1_CYCL		0x00000000 /* 1 cycle Disable Period	   */
+#define MxMR_DSx_2_CYCL		0x00400000 /* 2 cycle Disable Period	   */
+#define MxMR_DSx_3_CYCL		0x00800000 /* 3 cycle Disable Period	   */
+#define MxMR_DSx_4_CYCL		0x00c00000 /* 4 cycle Disable Period	   */
+#define MxMR_DSx_MSK		0x00c00000 /* Disable Timer Period Mask	   */
+#define MxMR_AMx_MSK		0x07000000 /* Addess Multiplex Size Mask   */
+#define MxMR_OP_NORM		0x00000000 /* Normal Operation		   */
+#define MxMR_OP_WARR		0x10000000 /* Write to Array		   */
+#define MxMR_OP_RARR		0x20000000 /* Read from Array		   */
+#define MxMR_OP_RUNP		0x30000000 /* Run Pattern		   */
+#define MxMR_OP_MSK		0x30000000 /* Command Opcode Mask	   */
+#define MxMR_RFEN		0x40000000 /* Refresh Enable		   */
+#define MxMR_BSEL		0x80000000 /* Bus Select		   */
+
 #define LBLAWAR_EN			0x80000000
 #define LBLAWAR_4KB			0x0000000B
 #define LBLAWAR_8KB			0x0000000C
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index ea702662f8..8cf7b6fb3d 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -96,6 +96,9 @@ typedef	struct	global_data {
 	uint mp_alloc_base;
 	uint mp_alloc_top;
 #endif /* CONFIG_QE */
+#if defined(CONFIG_FSL_LAW)
+	u32 used_laws;
+#endif
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	ipb_clk;
 	unsigned long	pci_clk;
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 7cc28bfe3a..c3496818f0 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -238,6 +238,42 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 	__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+	out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+	out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
 /*
  * Given a physical address and a length, return a virtual address
  * that can be used to access the memory range with the caching
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 8bdfb9ddf3..61a0d053e2 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -960,6 +960,17 @@ n:
 #define SR15	15
 
 #ifndef __ASSEMBLY__
+
+struct cpu_type {
+	char name[15];
+	u32 soc_ver;
+};
+
+struct cpu_type *identify_cpu(uint ver);
+
+#define CPU_TYPE_ENTRY(n, v) \
+	{ .name = #n, .soc_ver = SVR_##v, }
+
 #ifndef CONFIG_MACH_SPECIFIC
 extern int _machine;
 extern int have_of;
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 5719759808..d1d3cc3606 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -87,9 +87,6 @@
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 5b3ea05e63..a64565db93 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -73,9 +73,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BTB			    /* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index ffe9e0089d..669f4d7c8b 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -77,19 +77,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
-#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
-#define CFG_ALT_MEMTEST
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
@@ -171,6 +166,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
 #define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
 #define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index fc8ad8813f..acf6f0dce6 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -87,9 +87,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index e8383455c4..1948c0d276 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -73,9 +73,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BTB			    /* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 9c95cc6567..edf8525179 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -40,6 +40,7 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific */
+#define CONFIG_MPC8560		1
 
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
@@ -80,11 +81,8 @@
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
 #define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index a7c69d293c..9e6bb44ff9 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -80,7 +80,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index ff64378f20..8a53fdd0cb 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -49,6 +49,7 @@
 #define CONFIG_CPM2		1	/* has CPM2 */
 
 #define CONFIG_SBC8540		1	/* configuration for SBC8560 board */
+#define CONFIG_MPC8540		1
 
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific (supplement)	*/
 
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index fca5f74df7..d18f2346c6 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2007
+ * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
+ *
  * (C) Copyright 2005
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
@@ -27,7 +30,7 @@
  */
 
 /*
- * TQM85xx (8560/40/55/41) board configuration file
+ * TQM85xx (8560/40/55/41/48) board configuration file
  */
 
 #ifndef __CONFIG_H
@@ -39,25 +42,53 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41		*/
 
 #define CONFIG_PCI
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code	*/
+#define CONFIG_PCIX_CHECK		/* PCIX olny works at 66 MHz	*/
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCI1
+#define CONFIG_PCIE1
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata	*/
+#endif
+
 #define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
 
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
 
+ /*
+ * Configuration for big NOR Flashes
+ *
+ * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash.
+ * Please be aware, that this changes the whole memory map (new CCSRBAR
+ * address, etc). You have to use an adapted Linux kernel or FDT blob
+ * if this option is set.
+ */
+#undef CONFIG_TQM_BIGFLASH
+
+/*
+ * NAND flash support (disabled by default)
+ *
+ * Warning: NAND support will likely increase the U-Boot image size
+ * to more than 256 KB. Please adjust TEXT_BASE if necessary.
+ */
+#undef CONFIG_NAND
+
 /*
- * Only MPC8540 doesn't have CPM module
+ * MPC8540 and MPC8548 don't have CPM module
  */
-#ifndef CONFIG_MPC8540
+#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
 #define CONFIG_CPM2		1	/* has CPM2			*/
 #endif
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
+#define CONFIG_FSL_LAW		1	/* Use common FSL init code	*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support		*/
 
 /*
  * sysclk for MPC85xx
  *
  * Two valid values are:
- *    33000000
- *    66000000
+ *    33333333
+ *    66666666
  *
  * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
  * is likely the desired value here, so that is now the default.
@@ -88,10 +119,18 @@
  * actual resources get mapped (not physical addresses)
  */
 #define CFG_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_CCSRBAR	 	0xA0000000	/* relocated CCSRBAR	*/
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
+#endif /* CONFIG_TQM_BIGFLASH */
 #define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
 
+#define CFG_PCI1_ADDR		(CFG_CCSRBAR + 0x8000)
+#define CFG_PCI2_ADDR		(CFG_CCSRBAR + 0x9000)
+#define CFG_PCIE1_ADDR		(CFG_CCSRBAR + 0xa000)
+
 /*
  * DDR Setup
  */
@@ -102,65 +141,116 @@
 /* TQM8540 & 8560 need DLL-override */
 #define CONFIG_DDR_DLL				/* DLL fix needed	*/
 #define CONFIG_DDR_DEFAULT_CL	25		/* CAS latency 2,5	*/
-#endif /* defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) */
+#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */
 
-#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555)
+#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \
+    defined(CONFIG_TQM8548)
 #define CONFIG_DDR_DEFAULT_CL	30		/* CAS latency 3	*/
-#endif /* defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) */
+#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */
+
+/*
+ * Old TQM85xx boards have 'M' type Spansion Flashes from the S29GLxxxM
+ * series while new boards have 'N' type Flashes from the S29GLxxxN
+ * series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
+ */
+#ifdef CONFIG_TQM8548
+#define CONFIG_TQM_FLASH_N_TYPE
+#endif /* CONFIG_TQM8548 */
 
 /*
  * Flash on the Local Bus
  */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_FLASH0		0xE0000000
+#define CFG_FLASH1		0xC0000000
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_FLASH0		0xFC000000
 #define CFG_FLASH1		0xF8000000
+#endif /* CONFIG_TQM_BIGFLASH */
 #define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1, CFG_FLASH0 }
 
 #define CFG_LBC_FLASH_BASE	CFG_FLASH1	/* Localbus flash start	*/
-#define CFG_FLASH_BASE		CFG_LBC_FLASH_BASE /* start of FLASH	*/
+#define CFG_FLASH_BASE		CFG_LBC_FLASH_BASE  /* start of FLASH	*/
 
+/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
+ *
+ * Note: According to timing specifications external addr latch delay
+ * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
+ *
+ * For other Local Bus Clocks see following table:
+ *
+ * Clock/MHz   CFG_ORx_PRELIM
+ * 166         0x.....CA5
+ * 133         0x.....C85
+ * 100         0x.....C65
+ *  83         0x.....FA2
+ *  66         0x.....C82
+ *  50         0x.....C60
+ *  42         0x.....040
+ *  33         0x.....030
+ *  25         0x.....020
+ *
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_BR0_PRELIM		0xE0001801	/* port size 32bit	*/
+#define CFG_OR0_PRELIM		0xE0000040	/* 512MB Flash		*/
+#define CFG_BR1_PRELIM		0xC0001801	/* port size 32bit	*/
+#define CFG_OR1_PRELIM		0xE0000040	/* 512MB Flash		*/
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_BR0_PRELIM		0xfc001801	/* port size 32bit	*/
 #define CFG_OR0_PRELIM		0xfc000040	/* 64MB Flash		*/
 #define CFG_BR1_PRELIM		0xf8001801	/* port size 32bit	*/
 #define CFG_OR1_PRELIM		0xfc000040	/* 64MB Flash		*/
+#endif /* CONFIG_TQM_BIGFLASH */
 
-#define CFG_FLASH_CFI				/* flash is CFI compat.	*/
-#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver*/
+#define CFG_FLASH_CFI			/* flash is CFI compat.		*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
 #define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
+#define CFG_FLASH_USE_BUFFER_WRITE	1 /* speed up output to Flash	*/
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	512		/* sectors per device	*/
+#define CFG_MAX_FLASH_BANKS	2	/* number of banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* sectors per device		*/
 #undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
 
 #define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
-#define CFG_LBC_LCRR		0x00030008    /* LB clock ratio reg	*/
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg		*/
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer	*/
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer presc.*/
+/*
+ * Note: when changing the Local Bus clock divider you have to
+ * change the timing values in CFG_ORx_PRELIM.
+ *
+ * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
+ * LCRR[16:17] EADC  : External address delay cycles. It should be set to 2
+ *                     for Local Bus Clock > 83.3 MHz.
+ */
+#define CFG_LBC_LCRR		0x00030008	/* LB clock ratio reg	*/
+#define CFG_LBC_LBCR		0x00000000	/* LB config reg	*/
+#define CFG_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x20000000	/* LB refresh timer presc.*/
 
 #define CONFIG_L1_INIT_RAM
 #define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
+#define CFG_INIT_RAM_ADDR	(CFG_CCSRBAR \
+				 + 0x04010000)	/* Initial RAM address	*/
 #define CFG_INIT_RAM_END	0x4000		/* End used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data*/
+#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data	*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc	*/
+#define CFG_MONITOR_LEN		(~TEXT_BASE + 1)/* Reserved for Monitor	*/
+#define CFG_MALLOC_LEN		(384 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
 #if defined(CONFIG_TQM8560)
 
-#define CONFIG_CONS_ON_SCC      /* define if console on SCC */
-#undef  CONFIG_CONS_NONE        /* define if console on something else */
-#define CONFIG_CONS_INDEX       1  /* which serial channel for console */
+#define CONFIG_CONS_ON_SCC	/* define if console on SCC		*/
+#undef	CONFIG_CONS_NONE	/* define if console on something else	*/
+#define CONFIG_CONS_INDEX	1 /* which serial channel for console	*/
 
-#else	/* ! TQM8560 */
+#else /* !CONFIG_TQM8560 */
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
@@ -173,20 +263,18 @@
 #define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
 
 /* PS/2 Keyboard */
-#if !defined(CONFIG_TQM8560)
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	2	/* .. on DUART2			*/
 #define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
 #define CONFIG_BOARD_EARLY_INIT_R	1
-#endif /* !CONFIG_TQM8560 */
 
 #endif /* CONFIG_TQM8560 */
 
-#define CONFIG_BAUDRATE         115200
+#define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+#define CFG_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
@@ -194,11 +282,25 @@
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/* CAN */
+#define CFG_CAN_BASE		(CFG_CCSRBAR \
+				 + 0x03000000)	/* CAN base address     */
+#ifdef CONFIG_CAN_DRIVER
+#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 KiB address mask  */
+#define CFG_OR2_CAN		(CFG_CAN_OR_AM | OR_UPM_BI)
+#define CFG_BR2_CAN		((CFG_CAN_BASE & BR_BA) | \
+				 BR_PS_8 | BR_MS_UPMC | BR_V)
+#endif /* CONFIG_CAN_DRIVER */
 
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_FSL_I2C			/* Use FSL common I2C driver	*/
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
@@ -219,7 +321,7 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS		1       /* more than one eeprom */
+#define CFG_I2C_MULTI_EEPROMS		1	/* more than one eeprom	*/
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
@@ -228,10 +330,64 @@
 #define CFG_DTT_LOW_TEMP	-30
 #define CFG_DTT_HYSTERESIS	3
 
+#ifndef CONFIG_PCIE1
 /* RapidIO MMU */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_RIO_MEM_BASE	0xb0000000	/* base address		*/
+#define CFG_RIO_MEM_SIZE	0x10000000	/* 256M			*/
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_RIO_MEM_BASE	0xc0000000	/* base address		*/
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M			*/
+#endif /* CONFIG_TQM_BIGFLASH */
 #define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M			*/
+#endif /* CONFIG_PCIE1 */
+
+/* NAND FLASH */
+#ifdef CONFIG_NAND
+
+#undef CFG_NAND_LEGACY
+
+#define CONFIG_NAND_FSL_UPM	1
+
+#define	CONFIG_MTD_NAND_ECC_JFFS2	1	/* use JFFS2 ECC	*/
+
+/* address distance between chip selects */
+#define	CFG_NAND_SELECT_DEVICE	1
+#define	CFG_NAND_CS_DIST	0x200
+
+#define CFG_NAND_SIZE		0x8000
+#define CFG_NAND0_BASE		(CFG_CCSRBAR + 0x03010000)
+#define CFG_NAND1_BASE		(CFG_NAND0_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND2_BASE		(CFG_NAND1_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND3_BASE		(CFG_NAND2_BASE + CFG_NAND_CS_DIST)
+
+#define CFG_MAX_NAND_DEVICE     2	/* Max number of NAND devices	*/
+#define NAND_MAX_CHIPS		1
+
+#if (CFG_MAX_NAND_DEVICE == 1)
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
+#elif (CFG_MAX_NAND_DEVICE == 2)
+#define	CFG_NAND_QUIET_TEST	1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+			     CFG_NAND1_BASE, \
+}
+#elif (CFG_MAX_NAND_DEVICE == 4)
+#define	CFG_NAND_QUIET_TEST	1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+			     CFG_NAND1_BASE, \
+			     CFG_NAND2_BASE, \
+			     CFG_NAND3_BASE, \
+}
+#endif
+
+/* CS3 for NAND Flash */
+#define CFG_BR3_PRELIM		((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
+				 BR_MS_UPMB | BR_V)
+#define CFG_OR3_PRELIM		(P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
+
+#define NAND_BIG_DELAY_US       25	/* max tR for Samsung devices	*/
+
+#endif /* CONFIG_NAND */
 
 /*
  * General PCI
@@ -240,9 +396,33 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
-#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_BASE	(CFG_CCSRBAR + 0x02000000)
 #define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M			*/
+#define CFG_PCI1_IO_SIZE	0x1000000	/*  16M			*/
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+#ifdef CONFIG_PCIE1
+/*
+ * General PCI express
+ * Addresses are mapped 1-1.
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_PCIE1_MEM_BASE	0xb0000000
+#define CFG_PCIE1_MEM_SIZE	0x10000000      /* 512M                 */
+#define CFG_PCIE1_IO_BASE	0xaf000000
+#else /* !CONFIG_TQM_BIGFLASH */
+#define CFG_PCIE1_MEM_BASE	0xc0000000
+#define CFG_PCIE1_MEM_SIZE	0x20000000      /* 512M                 */
+#define CFG_PCIE1_IO_BASE	0xef000000
+#endif /* CONFIG_TQM_BIGFLASH */
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_IO_PHYS	CFG_PCIE1_IO_BASE
+#define CFG_PCIE1_IO_SIZE	0x1000000       /* 16M                  */
+#endif /* CONFIG_PCIE1 */
 
 #if defined(CONFIG_PCI)
 
@@ -254,8 +434,7 @@
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola			*/
 
-#endif	/* CONFIG_PCI */
-
+#endif /* CONFIG_PCI */
 
 #define CONFIG_NET_MULTI	1
 
@@ -277,6 +456,27 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 
+#ifdef CONFIG_TQM8548
+/*
+ * TQM8548 has 4 ethernet ports. 4 ETSEC's.
+ *
+ * On the STK85xx Starterkit the ETSEC3/4 ports are on an
+ * additional adapter (AIO) between module and Starterkit.
+ */
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"TSEC2"
+#define CONFIG_TSEC4	1
+#define CONFIG_TSEC4_NAME	"TSEC3"
+#define TSEC3_PHY_ADDR		4
+#define TSEC4_PHY_ADDR		5
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define CONFIG_HAS_ETH3
+#define CONFIG_HAS_ETH4
+#endif	/* CONFIG_TQM8548 */
+
 /* Options are TSEC[0-1], FEC */
 #define CONFIG_ETHPRIME		"TSEC0"
 
@@ -305,7 +505,7 @@
  * FCC2: a - c (X50.2 - 1)
  */
 #define CONFIG_ETHER_ON_FCC
-#define	CONFIG_ETHER_INDEX    1		/* FCC channel for ethernet	*/
+#define	CONFIG_ETHER_INDEX    1	/* FCC channel for ethernet	*/
 #endif
 
 #if defined(CONFIG_TQM8560)
@@ -321,12 +521,13 @@
  * FCC3: a - d (X50.2 - 3)
  */
 #define CONFIG_ETHER_ON_FCC
-#define	CONFIG_ETHER_INDEX    3		/* FCC channel for ethernet	*/
+#define	CONFIG_ETHER_INDEX    3	/* FCC channel for ethernet	*/
 #endif
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
 #define CONFIG_ETHER_ON_FCC1
-#define CFG_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CFG_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
+				 CMXFCR_TF1CS_MSK)
 #define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
 #define CFG_CPMFCR_RAMTYPE	0
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
@@ -334,7 +535,8 @@
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 #define CONFIG_ETHER_ON_FCC2
-#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
+				 CMXFCR_TF2CS_MSK)
 #define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
 #define CFG_CPMFCR_RAMTYPE	0
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
@@ -342,7 +544,8 @@
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
 #define CONFIG_ETHER_ON_FCC3
-#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
+				 CMXFCR_TF3CS_MSK)
 #define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
 #define CFG_CPMFCR_RAMTYPE	0
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
@@ -352,17 +555,21 @@
  * Environment
  */
 #define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x20000)
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env	*/
+
+#ifdef CONFIG_TQM_FLASH_N_TYPE
+#define CFG_ENV_SECT_SIZE	0x40000 /* 256K (one sector) for env	*/
+#else /* !CONFIG_TQM_FLASH_N_TYPE */
+#define CFG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) for env	*/
+#endif /* CONFIG_TQM_FLASH_N_TYPE */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
-
+#define	CONFIG_TIMESTAMP	/* Print image info with ts	*/
 
 /*
  * BOOTP options
@@ -372,6 +579,25 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+#ifdef CONFIG_NAND
+/*
+ * Use NAND-FLash as JFFS2 device
+ */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#define	CONFIG_JFFS2_NAND	1
+
+#ifdef CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nand0=TQM85xx-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=TQM85xx-nand:-"
+#else
+#define CONFIG_JFFS2_DEV 	"nand0"	/* NAND device jffs2 lives on	*/
+#define CONFIG_JFFS2_PART_OFFSET 0	/* start of jffs2 partition	*/
+#define CONFIG_JFFS2_PART_SIZE	0x200000 /* size of jffs2 partition	*/
+#endif /* CONFIG_JFFS2_CMDLINE */
+
+#endif /* CONFIG_NAND */
 
 /*
  * Command line configuration.
@@ -389,10 +615,9 @@
 #define CONFIG_CMD_MII
 
 #if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI
 #endif
 
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
@@ -403,12 +628,13 @@
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size	*/
+#define CFG_PBSIZE	(CFG_CBSIZE + \
+			 sizeof(CFG_PROMPT) + 16)   /* Print Buf Size	*/
 #define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CFG_HZ		1000		/* decrementer freq: 1ms ticks	*/
@@ -433,7 +659,6 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
-
 #define CONFIG_LOADADDR	 200000		/* default addr for tftp & bootm*/
 
 #define CONFIG_BOOTDELAY 5		/* -1 disables auto-boot	*/
@@ -444,10 +669,26 @@
 
 #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
 
+
+/*
+ * Setup some board specific values for the default environment variables
+ */
+#ifdef CONFIG_CPM2
+#define CFG_ENV_CONSDEV		"consdev=ttyCPM0\0"
+#else
+#define CFG_ENV_CONSDEV		"consdev=ttyS0\0"
+#endif
+#define CFG_ENV_FDT_FILE	"fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
+				MK_STR(CONFIG_HOSTNAME)".dtb\0"
+#define CFG_ENV_BOOTFILE	"bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
+#define CFG_ENV_UBOOT		"uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
+				"uboot_addr="MK_STR(TEXT_BASE)"\0"
+
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"bootfile="CFG_BOOTFILE_PATH"\0"				\
+	CFG_ENV_BOOTFILE						\
+	CFG_ENV_FDT_FILE						\
+	CFG_ENV_CONSDEV							\
 	"netdev=eth0\0"							\
-	"consdev=ttyS0\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$serverip:$rootpath\0"				\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -457,20 +698,27 @@
 	"addcons=setenv bootargs $bootargs "				\
 		"console=$consdev,$baudrate\0"				\
 	"flash_nfs=run nfsargs addip addcons;"				\
-		"bootm $kernel_addr\0"					\
+		"bootm $kernel_addr - $fdt_addr\0"			\
 	"flash_self=run ramargs addip addcons;"				\
-		"bootm $kernel_addr $ramdisk_addr\0"			\
-	"net_nfs=tftp $loadaddr $bootfile;"				\
-		"run nfsargs addip addcons;bootm\0"			\
+		"bootm $kernel_addr $ramdisk_addr $fdt_addr\0"		\
+	"net_nfs=tftp $kernel_addr_r $bootfile;"       			\
+		"tftp $fdt_addr_r $fdt_file;"				\
+		"run nfsargs addip addcons;"				\
+		"bootm $kernel_addr_r - $fdt_addr_r\0"    		\
 	"rootpath=/opt/eldk/ppc_85xx\0"					\
-	"kernel_addr=FE000000\0"					\
-	"ramdisk_addr=FE180000\0"					\
-	"load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0"		\
-	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
-		"cp.b 100000 fffc0000 40000;"			        \
+	"fdt_addr_r=900000\0"						\
+	"kernel_addr_r=1000000\0"      					\
+	"fdt_addr=ffec0000\0"						\
+	"kernel_addr=ffd00000\0"					\
+	"ramdisk_addr=ff800000\0"					\
+	CFG_ENV_UBOOT							\
+	"load=tftp 100000 $uboot\0"					\
+	"update=protect off $uboot_addr +$filesize;"			\
+		"erase $uboot_addr +$filesize;"				\
+		"cp.b 100000 $uboot_addr $filesize;"			\
 		"setenv filesize;saveenv\0"				\
 	"upd=run load update\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#endif	/* __CONFIG_H */
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 81a1e072c6..146eafe9cc 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -42,6 +42,7 @@
 
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
+#define CONFIG_MPC8560		1
 
 /* XXX flagging this as something I might want to delete */
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 6dc9effde4..16274137dc 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -165,7 +165,7 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
 
@@ -216,11 +216,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE	/* necessary for the LM75 chip */
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 
-/* RapidIO MMU */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address		*/
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M			*/
-
 /*
  * General PCI
  * Memory space is mapped 1-1.
@@ -238,13 +233,7 @@
 
 #if defined(CONFIG_PCI)
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-
-#define CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola			*/
-
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #endif	/* CONFIG_PCI */
 
 
@@ -390,10 +379,10 @@
 		"tftp ${fdt_addr_r} ${fdt_file}; "			\
 		"run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"fdt_file=$hostname/socrates.dtb\0"					\
+	"fdt_file=$hostname/socrates.dtb\0"				\
 	"fdt_addr_r=B00000\0"						\
 	"fdt_addr=FC1E0000\0"						\
-	"rootpath=/opt/eldk/ppc_85xx\0"					\
+	"rootpath=/opt/eldk/ppc_85xxDP\0"				\
 	"kernel_addr=FC000000\0"					\
 	"kernel_addr_r=200000\0"					\
 	"ramdisk_addr=FC200000\0"					\
@@ -420,4 +409,14 @@
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_USB_STORAGE		1
 
+/* FPGA and NAND */
+#define CFG_FPGA_BASE			0xc0000000
+#define CFG_BR3_PRELIM			0xc0001881 /* UPMA, 32-bit */
+#define CFG_OR3_PRELIM			0xfff00000  /* 1 MB */
+
+#define CFG_NAND_BASE			(CFG_FPGA_BASE + 0x70)
+#define CFG_MAX_NAND_DEVICE		1
+#define NAND_MAX_CHIPS			1
+#define CONFIG_CMD_NAND
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index ec04a30bec..6e8213d72a 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -41,6 +41,7 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXGP3		1	/* Silicon Tx GPPP board specific*/
+#define CONFIG_MPC8560		1
 
 #undef  CONFIG_PCI			/* pci ethernet support	*/
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index d033c866d7..a1e9789ea0 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -41,6 +41,7 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
+#define CONFIG_MPC8560		1
 
 #define CONFIG_PCI			/* PCI ethernet support	*/
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
index 634ff0291c..49fd8a60ff 100644
--- a/include/linux/mtd/fsl_upm.h
+++ b/include/linux/mtd/fsl_upm.h
@@ -16,7 +16,6 @@
 #include <linux/mtd/nand.h>
 
 struct fsl_upm {
-	const u32 *array;
 	void __iomem *mdr;
 	void __iomem *mxmr;
 	void __iomem *mar;
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index 72d7341d75..4cebea9597 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -93,7 +93,7 @@ struct nand_oobinfo {
 	uint32_t useecc;
 	uint32_t eccbytes;
 	uint32_t oobfree[8][2];
-	uint32_t eccpos[32];
+	uint32_t eccpos[48];
 };
 
 #endif /* __MTD_ABI_H__ */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index a90883162c..c42e08862f 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -421,7 +421,8 @@ void board_init_f (ulong bootflag)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX)
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX) && \
+    !defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx)
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 #endif