am335x_evm: Make NAND support modular

Give the user the ability to disable NAND support by defining
CONFIG_NO_NAND. This will allow custom hardware to easily support
this configuration.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
[trini: Make apply on top of other series]
Signed-off-by: Tom Rini <trini@ti.com>

2 files changed, 33 insertions, 20 deletions

diff --git a/boards.cfg b/boards.cfg
index ffb8a27911..e49d6dd85e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -242,7 +242,7 @@ vexpress_ca15_tc2            arm         armv7       vexpress            armltd
 vexpress_ca5x2               arm         armv7       vexpress            armltd
 vexpress_ca9x4               arm         armv7       vexpress            armltd
 am335x_evm                   arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,NAND
-am335x_evm_nor               arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,NOR
+am335x_evm_nor               arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR
 am335x_evm_norboot           arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,NOR,NOR_BOOT
 am335x_evm_spiboot           arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
 am335x_evm_uart1             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL2,CONS_INDEX=1,NAND
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 3ca35c32dc..b6331281cd 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -51,6 +51,27 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_VERSION_VARIABLE
 
+#ifdef CONFIG_NAND
+#define NANDARGS \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
+	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandsrcaddr=0x280000\0" \
+		"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
+		"bootm ${loadaddr}\0" \
+	"nandimgsize=0x500000\0"
+#else
+#define NANDARGS ""
+#endif
+
 /* set to negative value for no autoboot */
 #define CONFIG_BOOTDELAY		1
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
@@ -66,19 +87,12 @@
 	"fdtfile=undefined\0" \
 	"console=ttyO0,115200n8\0" \
 	"optargs=\0" \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \
 	"dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
-	"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 ro\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
 	"bootpart=0:2\0" \
-	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
-	"nandsrcaddr=0x280000\0" \
-	"nandimgsize=0x500000\0" \
 	"rootpath=/export/rootfs\0" \
 	"nfsopts=nolock\0" \
 	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
@@ -89,10 +103,6 @@
 		"${optargs} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
 	"spiroot=/dev/mtdblock4 rw\0" \
 	"spirootfstype=jffs2\0" \
 	"spisrcaddr=0xe0000\0" \
@@ -121,10 +131,6 @@
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr} - ${fdtaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
-		"bootm ${loadaddr}\0" \
 	"spiboot=echo Booting from spi ...; " \
 		"run spiargs; " \
 		"sf probe ${spibusno}:0; " \
@@ -150,7 +156,8 @@
 		"if test $board_name = A335X_SK; then " \
 			"setenv fdtfile am335x-evmsk.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi; \0"
+			"echo WARNING: Could not determine device tree to use; fi; \0" \
+	NANDARGS
 #endif
 
 #define CONFIG_BOOTCOMMAND \
@@ -234,7 +241,6 @@
 /* USB Device Firmware Update support */
 #define CONFIG_DFU_FUNCTION
 #define CONFIG_DFU_MMC
-#define CONFIG_DFU_NAND
 #define CONFIG_CMD_DFU
 #define DFU_ALT_INFO_MMC \
 	"boot part 0 1;" \
@@ -248,6 +254,8 @@
 	"spl-os-image fat 0 1;" \
 	"u-boot.img fat 0 1;" \
 	"uEnv.txt fat 0 1"
+#ifdef CONFIG_NAND
+#define CONFIG_DFU_NAND
 #define DFU_ALT_INFO_NAND \
 	"SPL part 0 1;" \
 	"SPL.backup1 part 0 2;" \
@@ -257,6 +265,7 @@
 	"u-boot-spl-os part 0 6;" \
 	"kernel part 0 8;" \
 	"rootfs part 0 9"
+#endif
 
  /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
@@ -344,9 +353,11 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
 
 /* nand */
+#ifdef CONFIG_NAND
 #define CONFIG_CMD_SPL_NAND_OFS			0x240000 /* end of u-boot */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x280000
 #define CONFIG_CMD_SPL_WRITE_SIZE		0x2000
+#endif
 
 /* spl export command */
 #define CONFIG_CMD_SPL
@@ -376,12 +387,13 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
 
 #define CONFIG_SPL_BOARD_INIT
+
+#ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_AM33XX_BCH
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#endif
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
@@ -403,6 +415,8 @@
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#endif
+#endif
 
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
@@ -506,7 +520,6 @@
 #define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
 
-#define CONFIG_NAND
 /* NAND support */
 #ifdef CONFIG_NAND
 #define CONFIG_CMD_NAND